2 files changed, 77 insertions, 0 deletions
diff --git a/arch/sh/boards/sh2000/Makefile b/arch/sh/boards/sh2000/Makefile
new file mode 100644
index 00000000000..05d390c3599
--- /dev/null
+++ b/arch/sh/boards/sh2000/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the SH2000 specific parts of the kernel
+#
+
+obj-y	 := setup.o
+
diff --git a/arch/sh/boards/sh2000/setup.c b/arch/sh/boards/sh2000/setup.c
new file mode 100644
index 00000000000..a290b1d09fb
--- /dev/null
+++ b/arch/sh/boards/sh2000/setup.c
@@ -0,0 +1,71 @@
+/*
+ * linux/arch/sh/kernel/setup_sh2000.c
+ *
+ * Copyright (C) 2001  SUGIOKA Tochinobu
+ *
+ * SH-2000 Support.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/mach/sh2000.h>
+
+#define CF_CIS_BASE	0xb4200000
+
+#define PORT_PECR	0xa4000108
+#define PORT_PHCR	0xa400010E
+#define	PORT_ICR1	0xa4000010
+#define	PORT_IRR0	0xa4000004
+
+#define IDE_OFFSET	0xb6200000
+#define NIC_OFFSET	0xb6000000
+#define EXTBUS_OFFSET	0xba000000
+
+
+const char *get_system_type(void)
+{
+	return "sh2000";
+}
+
+static unsigned long sh2000_isa_port2addr(unsigned long offset)
+{
+	if((offset & ~7) == 0x1f0 || offset == 0x3f6)
+		return IDE_OFFSET + offset;
+	else if((offset & ~0x1f) == 0x300)
+		return NIC_OFFSET + offset;
+	return EXTBUS_OFFSET + offset;
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_sh2000 __initmv = {
+        .mv_nr_irqs		= 80,
+        .mv_isa_port2addr	= sh2000_isa_port2addr,
+};
+ALIAS_MV(sh2000)
+
+/*
+ * Initialize the board
+ */
+int __init platform_setup(void)
+{
+	/* XXX: RTC setting comes here */
+
+	/* These should be done by BIOS/IPL ... */
+	/* Enable nCE2A, nCE2B output */
+	ctrl_outw(ctrl_inw(PORT_PECR) & ~0xf00, PORT_PECR);
+	/* Enable the Compact Flash card, and set the level interrupt */
+	ctrl_outw(0x0042, CF_CIS_BASE+0x0200);
+	/* Enable interrupt */
+	ctrl_outw(ctrl_inw(PORT_PHCR) & ~0x03f3, PORT_PHCR);
+	ctrl_outw(1, PORT_ICR1);
+	ctrl_outw(ctrl_inw(PORT_IRR0) & ~0xff3f, PORT_IRR0);
+	printk(KERN_INFO "SH-2000 Setup...done\n");
+	return 0;
+}