summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards')
-rw-r--r--arch/sh/boards/Kconfig18
-rw-r--r--arch/sh/boards/board-apsh4a3a.c10
-rw-r--r--arch/sh/boards/board-apsh4ad0a.c10
-rw-r--r--arch/sh/boards/board-magicpanelr2.c10
-rw-r--r--arch/sh/boards/board-polaris.c12
-rw-r--r--arch/sh/boards/board-sh2007.c12
-rw-r--r--arch/sh/boards/board-sh7757lcr.c14
-rw-r--r--arch/sh/boards/mach-ap325rxa/setup.c21
-rw-r--r--arch/sh/boards/mach-dreamcast/irq.c32
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c125
-rw-r--r--arch/sh/boards/mach-kfr2r09/setup.c12
-rw-r--r--arch/sh/boards/mach-migor/setup.c13
-rw-r--r--arch/sh/boards/mach-rsk/setup.c10
-rw-r--r--arch/sh/boards/mach-sdk7786/setup.c10
-rw-r--r--arch/sh/boards/mach-se/7343/irq.c129
-rw-r--r--arch/sh/boards/mach-se/7343/setup.c10
-rw-r--r--arch/sh/boards/mach-se/7722/irq.c131
-rw-r--r--arch/sh/boards/mach-se/7722/setup.c6
-rw-r--r--arch/sh/boards/mach-se/7724/irq.c36
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c15
-rw-r--r--arch/sh/boards/mach-x3proto/gpio.c57
21 files changed, 510 insertions, 183 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 1f56b35d324..fb5805745ac 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -44,6 +44,8 @@ config SH_7721_SOLUTION_ENGINE
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
depends on CPU_SUBTYPE_SH7722
help
Select 7722 SolutionEngine if configuring for a Hitachi SH772
@@ -55,6 +57,7 @@ config SH_7724_SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB
select SND_SOC_AK4642 if SND_SIMPLE_CARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select 7724 SolutionEngine if configuring for a Hitachi SH7724
evaluation board.
@@ -80,6 +83,8 @@ config SH_7780_SOLUTION_ENGINE
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
depends on CPU_SUBTYPE_SH7343
help
Select 7343 SolutionEngine if configuring for a Hitachi
@@ -136,6 +141,7 @@ config SH_RSK
bool "Renesas Starter Kit"
depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select this option if configuring for any of the RSK+ MCU
evaluation platforms.
@@ -155,6 +161,7 @@ config SH_SDK7786
select NO_IOPORT if !PCI
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_SRAM_POOL
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select SDK7786 if configuring for a Renesas Technology Europe
SH7786-65nm board.
@@ -169,6 +176,7 @@ config SH_SH7757LCR
bool "SH7757LCR"
depends on CPU_SUBTYPE_SH7757
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config SH_SH7785LCR
bool "SH7785LCR"
@@ -202,6 +210,7 @@ config SH_MIGOR
bool "Migo-R"
depends on CPU_SUBTYPE_SH7722
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Migo-R if configuring for the SH7722 Migo-R platform
by Renesas System Solutions Asia Pte. Ltd.
@@ -210,6 +219,7 @@ config SH_AP325RXA
bool "AP-325RXA"
depends on CPU_SUBTYPE_SH7723
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Renesas "AP-325RXA" support.
Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
@@ -218,6 +228,7 @@ config SH_KFR2R09
bool "KFR2R09"
depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
"Kit For R2R for 2009" support.
@@ -226,6 +237,7 @@ config SH_ECOVEC
depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB
select SND_SOC_DA7210 if SND_SIMPLE_CARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Renesas "R0P7724LC0011/21RL (EcoVec)" support.
@@ -295,11 +307,13 @@ config SH_X3PROTO
bool "SH-X3 Prototype board"
depends on CPU_SUBTYPE_SHX3
select NO_IOPORT if !PCI
+ select IRQ_DOMAIN
config SH_MAGIC_PANEL_R2
bool "Magic Panel R2"
depends on CPU_SUBTYPE_SH7720
select ARCH_REQUIRE_GPIOLIB
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
help
Select Magic Panel R2 if configuring for Magic Panel R2.
@@ -311,6 +325,7 @@ config SH_CAYMAN
config SH_POLARIS
bool "SMSC Polaris"
select CPU_HAS_IPR_IRQ
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7709
help
Select if configuring for an SMSC Polaris development board
@@ -318,6 +333,7 @@ config SH_POLARIS
config SH_SH2007
bool "SH-2007 board"
select NO_IOPORT
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7780
help
SH-2007 is a single-board computer based around SH7780 chip
@@ -329,6 +345,7 @@ config SH_SH2007
config SH_APSH4A3A
bool "AP-SH4A-3A"
select SH_ALPHA_BOARD
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7785
help
Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
@@ -337,6 +354,7 @@ config SH_APSH4AD0A
bool "AP-SH4AD-0A"
select SH_ALPHA_BOARD
select SYS_SUPPORTS_PCI
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7786
help
Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c
index 2823619c600..0a39c241628 100644
--- a/arch/sh/boards/board-apsh4a3a.c
+++ b/arch/sh/boards/board-apsh4a3a.c
@@ -13,6 +13,8 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/physmap.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/irq.h>
#include <linux/clk.h>
@@ -66,6 +68,12 @@ static struct platform_device nor_flash_device = {
.resource = nor_flash_resources,
};
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct resource smsc911x_resources[] = {
[0] = {
.name = "smsc911x-memory",
@@ -105,6 +113,8 @@ static struct platform_device *apsh4a3a_devices[] __initdata = {
static int __init apsh4a3a_devices_setup(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
return platform_add_devices(apsh4a3a_devices,
ARRAY_SIZE(apsh4a3a_devices));
}
diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c
index b4d6292a924..92eac3a9918 100644
--- a/arch/sh/boards/board-apsh4ad0a.c
+++ b/arch/sh/boards/board-apsh4ad0a.c
@@ -12,12 +12,20 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <asm/machvec.h>
#include <asm/sizes.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct resource smsc911x_resources[] = {
[0] = {
.name = "smsc911x-memory",
@@ -56,6 +64,8 @@ static struct platform_device *apsh4ad0a_devices[] __initdata = {
static int __init apsh4ad0a_devices_setup(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
return platform_add_devices(apsh4ad0a_devices,
ARRAY_SIZE(apsh4ad0a_devices));
}
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 90568f9de3a..20500858b56 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -14,6 +14,8 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -24,6 +26,12 @@
#include <asm/heartbeat.h>
#include <cpu/sh7720.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
/* Wait until reset finished. Timeout is 100ms. */
@@ -348,6 +356,8 @@ static struct platform_device *mpr2_devices[] __initdata = {
static int __init mpr2_devices_setup(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
}
device_initcall(mpr2_devices_setup);
diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c
index 37d03c097ae..37a08d09472 100644
--- a/arch/sh/boards/board-polaris.c
+++ b/arch/sh/boards/board-polaris.c
@@ -1,5 +1,5 @@
/*
- * June 2006 steve.glendinning@smsc.com
+ * June 2006 Steve Glendinning <steve.glendinning@shawell.net>
*
* Polaris-specific resource declaration
*
@@ -9,6 +9,8 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -22,6 +24,12 @@
#define AREA5_WAIT_CTRL (0x1C00)
#define WAIT_STATES_10 (0x7)
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static struct resource smsc911x_resources[] = {
[0] = {
.name = "smsc911x-memory",
@@ -88,6 +96,8 @@ static int __init polaris_initialise(void)
printk(KERN_INFO "Configuring Polaris external bus\n");
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
/* Configure area 5 with 2 wait states */
wcr = __raw_readw(WCR2);
wcr &= (~AREA5_WAIT_CTRL);
diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c
index b90b78f6a82..1980bb7e578 100644
--- a/arch/sh/boards/board-sh2007.c
+++ b/arch/sh/boards/board-sh2007.c
@@ -6,6 +6,8 @@
*/
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
@@ -13,6 +15,14 @@
#include <asm/machvec.h>
#include <mach/sh2007.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+ REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
struct smsc911x_platform_config smc911x_info = {
.flags = SMSC911X_USE_32BIT,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
@@ -98,6 +108,8 @@ static struct platform_device *sh2007_devices[] __initdata = {
static int __init sh2007_io_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
return 0;
}
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 5087f8bb4cf..41f86702eb9 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -12,6 +12,8 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/io.h>
@@ -199,6 +201,15 @@ static struct platform_device sh7757_eth_giga1_device = {
},
};
+/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
/* SH_MMCIF */
static struct resource sh_mmcif_resources[] = {
[0] = {
@@ -329,6 +340,9 @@ static struct spi_board_info spi_board_info[] = {
static int __init sh7757lcr_devices_setup(void)
{
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
/* RGMII (PTA) */
gpio_request(GPIO_FN_ET0_MDC, NULL);
gpio_request(GPIO_FN_ET0_MDIO, NULL);
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index f33ebf44707..9e963c1d144 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -20,6 +20,8 @@
#include <linux/mtd/sh_flctl.h>
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/videodev2.h>
@@ -34,6 +36,12 @@
#include <asm/suspend.h>
#include <cpu/sh7723.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct smsc911x_platform_config smsc911x_config = {
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
@@ -423,6 +431,15 @@ static struct platform_device ceu_device = {
},
};
+/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
static struct resource sdhi0_cn3_resources[] = {
[0] = {
.name = "SDHI0",
@@ -544,6 +561,10 @@ static int __init ap325rxa_devices_setup(void)
&ap325rxa_sdram_leave_start,
&ap325rxa_sdram_leave_end);
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+ regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
/* LD3 and LD4 LEDs */
gpio_request(GPIO_PTX5, NULL); /* RUN */
gpio_direction_output(GPIO_PTX5, 1);
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index f63d323f411..2789647abeb 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -8,10 +8,11 @@
* This file is part of the LinuxDC project (www.linuxdc.org)
* Released under the terms of the GNU GPL v2.0
*/
-
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/export.h>
+#include <linux/err.h>
#include <mach/sysasic.h>
/*
@@ -141,26 +142,15 @@ int systemasic_irq_demux(int irq)
void systemasic_irq_init(void)
{
- int i, nid = cpu_to_node(boot_cpu_data);
-
- /* Assign all virtual IRQs to the System ASIC int. handler */
- for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) {
- unsigned int irq;
-
- irq = create_irq_nr(i, nid);
- if (unlikely(irq == 0)) {
- pr_err("%s: failed hooking irq %d for systemasic\n",
- __func__, i);
- return;
- }
+ int irq_base, i;
- if (unlikely(irq != i)) {
- pr_err("%s: got irq %d but wanted %d, bailing.\n",
- __func__, irq, i);
- destroy_irq(irq);
- return;
- }
+ irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE,
+ HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1);
+ if (IS_ERR_VALUE(irq_base)) {
+ pr_err("%s: failed hooking irqs\n", __func__);
+ return;
+ }
+ for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq);
- }
}
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 4158d70c0de..64559e8af14 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -19,6 +19,8 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/i2c.h>
@@ -242,9 +244,17 @@ static int usbhs_get_id(struct platform_device *pdev)
return gpio_get_value(GPIO_PTB3);
}
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+ /* enable vbus if HOST */
+ if (!gpio_get_value(GPIO_PTB3))
+ gpio_set_value(GPIO_PTB5, 1);
+}
+
static struct renesas_usbhs_platform_info usbhs_info = {
.platform_callback = {
.get_id = usbhs_get_id,
+ .phy_reset = usbhs_phy_reset,
},
.driver_param = {
.buswait_bwait = 4,
@@ -518,10 +528,86 @@ static struct i2c_board_info ts_i2c_clients = {
.irq = IRQ0,
};
+static struct regulator_consumer_supply cn12_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct regulator_init_data cn12_power_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers),
+ .consumer_supplies = cn12_power_consumers,
+};
+
+static struct fixed_voltage_config cn12_power_info = {
+ .supply_name = "CN12 SD/MMC Vdd",
+ .microvolts = 3300000,
+ .gpio = GPIO_PTB7,
+ .enable_high = 1,
+ .init_data = &cn12_power_init_data,
+};
+
+static struct platform_device cn12_power = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &cn12_power_info,
+ },
+};
+
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
/* SDHI0 */
+static struct regulator_consumer_supply sdhi0_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data sdhi0_power_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers),
+ .consumer_supplies = sdhi0_power_consumers,
+};
+
+static struct fixed_voltage_config sdhi0_power_info = {
+ .supply_name = "CN11 SD/MMC Vdd",
+ .microvolts = 3300000,
+ .gpio = GPIO_PTB6,
+ .enable_high = 1,
+ .init_data = &sdhi0_power_init_data,
+};
+
+static struct platform_device sdhi0_power = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdhi0_power_info,
+ },
+};
+
static void sdhi0_set_pwr(struct platform_device *pdev, int state)
{
+ static int power_gpio = -EINVAL;
+
+ if (power_gpio < 0) {
+ int ret = gpio_request(GPIO_PTB6, NULL);
+ if (!ret) {
+ power_gpio = GPIO_PTB6;
+ gpio_direction_output(power_gpio, 0);
+ }
+ }
+
+ /*
+ * Toggle the GPIO regardless, whether we managed to grab it above or
+ * the fixed regulator driver did.
+ */
gpio_set_value(GPIO_PTB6, state);
}
@@ -562,13 +648,27 @@ static struct platform_device sdhi0_device = {
},
};
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-/* SDHI1 */
-static void sdhi1_set_pwr(struct platform_device *pdev, int state)
+static void cn12_set_pwr(struct platform_device *pdev, int state)
{
+ static int power_gpio = -EINVAL;
+
+ if (power_gpio < 0) {
+ int ret = gpio_request(GPIO_PTB7, NULL);
+ if (!ret) {
+ power_gpio = GPIO_PTB7;
+ gpio_direction_output(power_gpio, 0);
+ }
+ }
+
+ /*
+ * Toggle the GPIO regardless, whether we managed to grab it above or
+ * the fixed regulator driver did.
+ */
gpio_set_value(GPIO_PTB7, state);
}
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+/* SDHI1 */
static int sdhi1_get_cd(struct platform_device *pdev)
{
return !gpio_get_value(GPIO_PTW7);
@@ -579,7 +679,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
MMC_CAP_NEEDS_POLL,
- .set_pwr = sdhi1_set_pwr,
+ .set_pwr = cn12_set_pwr,
.get_cd = sdhi1_get_cd,
};
@@ -899,14 +999,9 @@ static struct platform_device vou_device = {
#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* SH_MMCIF */
-static void mmcif_set_pwr(struct platform_device *pdev, int state)
-{
- gpio_set_value(GPIO_PTB7, state);
-}
-
static void mmcif_down_pwr(struct platform_device *pdev)
{
- gpio_set_value(GPIO_PTB7, 0);
+ cn12_set_pwr(pdev, 0);
}
static struct resource sh_mmcif_resources[] = {
@@ -929,7 +1024,7 @@ static struct resource sh_mmcif_resources[] = {
};
static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .set_pwr = mmcif_set_pwr,
+ .set_pwr = cn12_set_pwr,
.down_pwr = mmcif_down_pwr,
.sup_pclk = 0, /* SH7724: Max Pclk/2 */
.caps = MMC_CAP_4_BIT_DATA |
@@ -960,7 +1055,9 @@ static struct platform_device *ecovec_devices[] __initdata = {
&ceu0_device,
&ceu1_device,
&keysc_device,
+ &cn12_power,
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+ &sdhi0_power,
&sdhi0_device,
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
&sdhi1_device,
@@ -1258,8 +1355,6 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_SDHI0D2, NULL);
gpio_request(GPIO_FN_SDHI0D1, NULL);
gpio_request(GPIO_FN_SDHI0D0, NULL);
- gpio_request(GPIO_PTB6, NULL);
- gpio_direction_output(GPIO_PTB6, 0);
#else
/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
@@ -1288,8 +1383,6 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_MMC_D0, NULL);
gpio_request(GPIO_FN_MMC_CLK, NULL);
gpio_request(GPIO_FN_MMC_CMD, NULL);
- gpio_request(GPIO_PTB7, NULL);
- gpio_direction_output(GPIO_PTB7, 0);
cn12_enabled = true;
#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
@@ -1301,8 +1394,6 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_SDHI1D2, NULL);
gpio_request(GPIO_FN_SDHI1D1, NULL);
gpio_request(GPIO_FN_SDHI1D0, NULL);
- gpio_request(GPIO_PTB7, NULL);
- gpio_direction_output(GPIO_PTB7, 0);
/* Card-detect, used on CN12 with SDHI1 */
gpio_request(GPIO_PTW7, NULL);
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 43a179ce9af..f2a4304fbe2 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -21,6 +21,8 @@
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/usb/r8a66597.h>
#include <linux/videodev2.h>
#include <linux/sh_intc.h>
@@ -341,6 +343,13 @@ static struct platform_device kfr2r09_camera = {
},
};
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
static struct resource kfr2r09_sh_sdhi0_resources[] = {
[0] = {
.name = "SDHI0",
@@ -523,6 +532,9 @@ static int __init kfr2r09_devices_setup(void)
&kfr2r09_sdram_leave_start,
&kfr2r09_sdram_leave_end);
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
/* enable SCIF1 serial port for YC401 console support */
gpio_request(GPIO_FN_SCIF1_RXD, NULL);
gpio_request(GPIO_FN_SCIF1_TXD, NULL);
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index a8a1ca741c8..8b73194ed2c 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -17,6 +17,8 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smc91x.h>
#include <linux/delay.h>
#include <linux/clk.h>
@@ -386,6 +388,13 @@ static struct platform_device migor_ceu_device = {
},
};
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
static struct resource sdhi_cn9_resources[] = {
[0] = {
.name = "SDHI",
@@ -498,6 +507,10 @@ static int __init migor_devices_setup(void)
&migor_sdram_enter_end,
&migor_sdram_leave_start,
&migor_sdram_leave_end);
+
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
/* Let D11 LED show STATUS0 */
gpio_request(GPIO_FN_STATUS0, NULL);
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
index 895f030070d..2685ea03b06 100644
--- a/arch/sh/boards/mach-rsk/setup.c
+++ b/arch/sh/boards/mach-rsk/setup.c
@@ -16,9 +16,17 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/map.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <asm/machvec.h>
#include <asm/io.h>
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static const char *part_probes[] = { "cmdlinepart", NULL };
static struct mtd_partition rsk_partitions[] = {
@@ -67,6 +75,8 @@ static struct platform_device *rsk_devices[] __initdata = {
static int __init rsk_devices_setup(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
return platform_add_devices(rsk_devices,
ARRAY_SIZE(rsk_devices));
}
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
index 27a2314f50a..c29268bfd34 100644
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -11,6 +11,8 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/i2c.h>
#include <linux/irq.h>
@@ -38,6 +40,12 @@ static struct platform_device heartbeat_device = {
.resource = &heartbeat_resource,
};
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
static struct resource smsc911x_resources[] = {
[0] = {
.name = "smsc911x-memory",
@@ -236,6 +244,8 @@ static void __init sdk7786_setup(char **cmdline_p)
{
pr_info("Renesas Technology Europe SDK7786 support:\n");
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
sdk7786_fpga_init();
sdk7786_nmi_init();
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index fd45ffc4834..7646bf0486c 100644
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -1,86 +1,129 @@
/*
- * linux/arch/sh/boards/se/7343/irq.c
+ * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
*
* Copyright (C) 2008 Yoshihiro Shimoda
+ * Copyright (C) 2012 Paul Mundt
*
- * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Based on linux/arch/sh/boards/se/7343/irq.c
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#define DRV_NAME "SE7343-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#define irq_reg_readl ioread16
+#define irq_reg_writel iowrite16
+
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
+#include <asm/sizes.h>
#include <mach-se/mach/se7343.h>
-unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
+#define PA_CPLD_BASE_ADDR 0x11400000
+#define PA_CPLD_ST_REG 0x08 /* CPLD Interrupt status register */
+#define PA_CPLD_IMSK_REG 0x0a /* CPLD Interrupt mask register */
-static void disable_se7343_irq(struct irq_data *data)
-{
- unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
- __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
-}
+static void __iomem *se7343_irq_regs;
+struct irq_domain *se7343_irq_domain;
-static void enable_se7343_irq(struct irq_data *data)
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
- __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
-}
+ struct irq_data *data = irq_get_irq_data(irq);
+ struct irq_chip *chip = irq_data_get_irq_chip(data);
+ unsigned long mask;
+ int bit;
-static struct irq_chip se7343_irq_chip __read_mostly = {
- .name = "SE7343-FPGA",
- .irq_mask = disable_se7343_irq,
- .irq_unmask = enable_se7343_irq,
-};
+ chip->irq_mask_ack(data);
-static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
+ mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
+
+ for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
+ generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit));
+
+ chip->irq_unmask(data);
+}
+
+static void __init se7343_domain_init(void)
{
- unsigned short intv = __raw_readw(PA_CPLD_ST);
- unsigned int ext_irq = 0;
+ int i;
- intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+ se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
+ &irq_domain_simple_ops, NULL);
+ if (unlikely(!se7343_irq_domain)) {
+ printk("Failed to get IRQ domain\n");
+ return;
+ }
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
+ for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
+ int irq = irq_create_mapping(se7343_irq_domain, i);
- generic_handle_irq(se7343_fpga_irq[ext_irq]);
+ if (unlikely(irq == 0)) {
+ printk("Failed to allocate IRQ %d\n", i);
+ return;
+ }
}
}
-/*
- * Initialize IRQ setting
- */
-void __init init_7343se_IRQ(void)
+static void __init se7343_gc_init(void)
{
- int i, irq;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ unsigned int irq_base;
- __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
+ irq_base = irq_linear_revmap(se7343_irq_domain, 0);
- for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
- irq = create_irq();
- if (irq < 0)
- return;
- se7343_fpga_irq[i] = irq;
+ gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
+ handle_level_irq);
+ if (unlikely(!gc))
+ return;
- irq_set_chip_and_handler_name(se7343_fpga_irq[i],
- &se7343_irq_chip,
- handle_level_irq,
- "level");
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- irq_set_chip_data(se7343_fpga_irq[i], (void *)i);
- }
+ ct->regs.mask = PA_CPLD_IMSK_REG;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
+ IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+
irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7343se_IRQ(void)
+{
+ se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
+ if (unlikely(!se7343_irq_regs)) {
+ pr_err("Failed to remap CPLD\n");
+ return;
+ }
+
+ /*
+ * All FPGA IRQs disabled by default
+ */
+ iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
+
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
+
+ se7343_domain_init();
+ se7343_gc_init();
+}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index d2370af56d7..8ce4f2a202a 100644
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -5,6 +5,7 @@
#include <linux/serial_reg.h>
#include <linux/usb/isp116x.h>
#include <linux/delay.h>
+#include <linux/irqdomain.h>
#include <asm/machvec.h>
#include <mach-se/mach/se7343.h>
#include <asm/heartbeat.h>
@@ -145,11 +146,12 @@ static struct platform_device *sh7343se_platform_devices[] __initdata = {
static int __init sh7343se_devices_setup(void)
{
/* Wire-up dynamic vectors */
- serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA];
- serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB];
-
+ serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
+ SE7343_FPGA_IRQ_UARTA);
+ serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
+ SE7343_FPGA_IRQ_UARTB);
usb_resources[2].start = usb_resources[2].end =
- se7343_fpga_irq[SE7343_FPGA_IRQ_USB];
+ irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
return platform_add_devices(sh7343se_platform_devices,
ARRAY_SIZE(sh7343se_platform_devices));
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index aac92f21ebd..f5e2af1bf04 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -1,79 +1,96 @@
/*
- * linux/arch/sh/boards/se/7722/irq.c
+ * Hitachi UL SolutionEngine 7722 FPGA IRQ Support.
*
* Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
+ * Copyright (C) 2012 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#define DRV_NAME "SE7722-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#define irq_reg_readl ioread16
+#define irq_reg_writel iowrite16
+
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <asm/sizes.h>
#include <mach-se/mach/se7722.h>
-unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
+#define IRQ01_BASE_ADDR 0x11800000
+#define IRQ01_MODE_REG 0
+#define IRQ01_STS_REG 4
+#define IRQ01_MASK_REG 8
-static void disable_se7722_irq(struct irq_data *data)
-{
- unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
- __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
-}
+static void __iomem *se7722_irq_regs;
+struct irq_domain *se7722_irq_domain;
-static void enable_se7722_irq(struct irq_data *data)
+static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data);
- __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
-}
+ struct irq_data *data = irq_get_irq_data(irq);
+ struct irq_chip *chip = irq_data_get_irq_chip(data);
+ unsigned long mask;
+ int bit;
-static struct irq_chip se7722_irq_chip __read_mostly = {
- .name = "SE7722-FPGA",
- .irq_mask = disable_se7722_irq,
- .irq_unmask = enable_se7722_irq,
-};
+ chip->irq_mask_ack(data);
-static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
+ mask = ioread16(se7722_irq_regs + IRQ01_STS_REG);
+
+ for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR)
+ generic_handle_irq(irq_linear_revmap(se7722_irq_domain, bit));
+
+ chip->irq_unmask(data);
+}
+
+static void __init se7722_domain_init(void)
{
- unsigned short intv = __raw_readw(IRQ01_STS);
- unsigned int ext_irq = 0;
+ int i;
- intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
+ se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR,
+ &irq_domain_simple_ops, NULL);
+ if (unlikely(!se7722_irq_domain)) {
+ printk("Failed to get IRQ domain\n");
+ return;
+ }
- for (; intv; intv >>= 1, ext_irq++) {
- if (!(intv & 1))
- continue;
+ for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
+ int irq = irq_create_mapping(se7722_irq_domain, i);
- generic_handle_irq(se7722_fpga_irq[ext_irq]);
+ if (unlikely(irq == 0)) {
+ printk("Failed to allocate IRQ %d\n", i);
+ return;
+ }
}
}
-/*
- * Initialize IRQ setting
- */
-void __init init_se7722_IRQ(void)
+static void __init se7722_gc_init(void)
{
- int i, irq;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ unsigned int irq_base;
- __raw_writew(0, IRQ01_MASK); /* disable all irqs */
- __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
+ irq_base = irq_linear_revmap(se7722_irq_domain, 0);
- for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
- irq = create_irq();
- if (irq < 0)
- return;
- se7722_fpga_irq[i] = irq;
+ gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs,
+ handle_level_irq);
+ if (unlikely(!gc))
+ return;
- irq_set_chip_and_handler_name(se7722_fpga_irq[i],
- &se7722_irq_chip,
- handle_level_irq,
- "level");
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- irq_set_chip_data(se7722_fpga_irq[i], (void *)i);
- }
+ ct->regs.mask = IRQ01_MASK_REG;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR),
+ IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux);
irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
@@ -81,3 +98,25 @@ void __init init_se7722_IRQ(void)
irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux);
irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
}
+
+/*
+ * Initialize FPGA IRQs
+ */
+void __init init_se7722_IRQ(void)
+{
+ se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16);
+ if (unlikely(!se7722_irq_regs)) {
+ printk("Failed to remap IRQ01 regs\n");
+ return;
+ }
+
+ /*
+ * All FPGA IRQs disabled by default
+ */
+ iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG);
+
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
+
+ se7722_domain_init();
+ se7722_gc_init();
+}
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index 8f7f0550cfd..e04e2bc4698 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -2,6 +2,7 @@
* linux/arch/sh/boards/se/7722/setup.c
*
* Copyright (C) 2007 Nobuhiro Iwamatsu
+ * Copyright (C) 2012 Paul Mundt
*
* Hitachi UL SolutionEngine 7722 Support.
*
@@ -15,6 +16,7 @@
#include <linux/ata_platform.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/irqdomain.h>
#include <linux/smc91x.h>
#include <linux/sh_intc.h>
#include <mach-se/mach/se7722.h>
@@ -143,10 +145,10 @@ static int __init se7722_devices_setup(void)
/* Wire-up dynamic vectors */
cf_ide_resources[2].start = cf_ide_resources[2].end =
- se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0];
+ irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0);
smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
- se7722_fpga_irq[SE7722_FPGA_IRQ_SMC];
+ irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC);
return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
}
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
index c6342ce7768..5d1d3ec9a6c 100644
--- a/arch/sh/boards/mach-se/7724/irq.c
+++ b/arch/sh/boards/mach-se/7724/irq.c
@@ -17,8 +17,10 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/export.h>
+#include <linux/topology.h>
+#include <linux/io.h>
+#include <linux/err.h>
#include <mach-se/mach/se7724.h>
struct fpga_irq {
@@ -111,7 +113,7 @@ static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
*/
void __init init_se7724_IRQ(void)
{
- int i, nid = cpu_to_node(boot_cpu_data);
+ int irq_base, i;
__raw_writew(0xffff, IRQ0_MR); /* mask all */
__raw_writew(0xffff, IRQ1_MR); /* mask all */
@@ -121,28 +123,16 @@ void __init init_se7724_IRQ(void)
__raw_writew(0x0000, IRQ2_SR); /* clear irq */
__raw_writew(0x002a, IRQ_MODE); /* set irq type */
- for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) {
- int irq, wanted;
-
- wanted = SE7724_FPGA_IRQ_BASE + i;
-
- irq = create_irq_nr(wanted, nid);
- if (unlikely(irq == 0)) {
- pr_err("%s: failed hooking irq %d for FPGA\n",
- __func__, wanted);
- return;
- }
-
- if (unlikely(irq != wanted)) {
- pr_err("%s: got irq %d but wanted %d, bailing.\n",
- __func__, irq, wanted);
- destroy_irq(irq);
- return;
- }
+ irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE,
+ SE7724_FPGA_IRQ_NR, numa_node_id());
+ if (IS_ERR_VALUE(irq_base)) {
+ pr_err("%s: failed hooking irqs for FPGA\n", __func__);
+ return;
+ }
- irq_set_chip_and_handler_name(irq, &se7724_irq_chip,
+ for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
+ irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip,
handle_level_irq, "level");
- }
irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux);
irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index ffbf5bc7366..35f6efa3ac0 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -18,6 +18,8 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mtd/physmap.h>
#include <linux/delay.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
@@ -454,6 +456,15 @@ static struct platform_device sh7724_usb1_gadget_device = {
.resource = sh7724_usb1_gadget_resources,
};
+/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
static struct resource sdhi0_cn7_resources[] = {
[0] = {
.name = "SDHI0",
@@ -684,6 +695,10 @@ static int __init devices_setup(void)
&ms7724se_sdram_enter_end,
&ms7724se_sdram_leave_start,
&ms7724se_sdram_leave_end);
+
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
/* Reset Release */
fpga_out = __raw_readw(FPGA_OUT);
/* bit4: NTSC_PDN, bit5: NTSC_RESET */
diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c
index f33b2b57019..3ea65e9b56e 100644
--- a/arch/sh/boards/mach-x3proto/gpio.c
+++ b/arch/sh/boards/mach-x3proto/gpio.c
@@ -3,7 +3,7 @@
*
* Renesas SH-X3 Prototype Baseboard GPIO Support.
*
- * Copyright (C) 2010 Paul Mundt
+ * Copyright (C) 2010 - 2012 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -17,6 +17,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
+#include <linux/irqdomain.h>
#include <linux/io.h>
#include <mach/ilsel.h>
#include <mach/hardware.h>
@@ -26,7 +27,7 @@
#define KEYDETR 0xb81c0004
static DEFINE_SPINLOCK(x3proto_gpio_lock);
-static unsigned int x3proto_gpio_irq_map[NR_BASEBOARD_GPIOS] = { 0, };
+static struct irq_domain *x3proto_irq_domain;
static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
@@ -49,7 +50,14 @@ static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio)
static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
- return x3proto_gpio_irq_map[gpio];
+ int virq;
+
+ if (gpio < chip->ngpio)
+ virq = irq_create_mapping(x3proto_irq_domain, gpio);
+ else
+ virq = -ENXIO;
+
+ return virq;
}
static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
@@ -62,9 +70,8 @@ static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
chip->irq_mask_ack(data);
mask = __raw_readw(KEYDETR);
-
for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
- generic_handle_irq(x3proto_gpio_to_irq(NULL, pin));
+ generic_handle_irq(irq_linear_revmap(x3proto_irq_domain, pin));
chip->irq_unmask(data);
}
@@ -78,10 +85,23 @@ struct gpio_chip x3proto_gpio_chip = {
.ngpio = NR_BASEBOARD_GPIOS,
};
+static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq,
+ "gpio");
+
+ return 0;
+}
+
+static struct irq_domain_ops x3proto_gpio_irq_ops = {
+ .map = x3proto_gpio_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
int __init x3proto_gpio_setup(void)
{
- int ilsel;
- int ret, i;
+ int ilsel, ret;
ilsel = ilsel_enable(ILSEL_KEY);
if (unlikely(ilsel < 0))
@@ -91,21 +111,10 @@ int __init x3proto_gpio_setup(void)
if (unlikely(ret))
goto err_gpio;
- for (i = 0; i < NR_BASEBOARD_GPIOS; i++) {
- unsigned long flags;
- int irq = create_irq();
-
- if (unlikely(irq < 0)) {
- ret = -EINVAL;
- goto err_irq;
- }
-
- spin_lock_irqsave(&x3proto_gpio_lock, flags);
- x3proto_gpio_irq_map[i] = irq;
- irq_set_chip_and_handler_name(irq, &dummy_irq_chip,
- handle_simple_irq, "gpio");
- spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
- }
+ x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS,
+ &x3proto_gpio_irq_ops, NULL);
+ if (unlikely(!x3proto_irq_domain))
+ goto err_irq;
pr_info("registering '%s' support, handling GPIOs %u -> %u, "
"bound to IRQ %u\n",
@@ -119,10 +128,6 @@ int __init x3proto_gpio_setup(void)
return 0;
err_irq:
- for (; i >= 0; --i)
- if (x3proto_gpio_irq_map[i])
- destroy_irq(x3proto_gpio_irq_map[i]);
-
ret = gpiochip_remove(&x3proto_gpio_chip);
if (unlikely(ret))
pr_err("Failed deregistering GPIO\n");