summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards')
-rw-r--r--arch/sh/boards/Kconfig11
-rw-r--r--arch/sh/boards/Makefile1
-rw-r--r--arch/sh/boards/board-ap325rxa.c7
-rw-r--r--arch/sh/boards/board-shmin.c14
-rw-r--r--arch/sh/boards/mach-cayman/Makefile1
-rw-r--r--arch/sh/boards/mach-cayman/irq.c35
-rw-r--r--arch/sh/boards/mach-cayman/led.c51
-rw-r--r--arch/sh/boards/mach-dreamcast/irq.c192
-rw-r--r--arch/sh/boards/mach-dreamcast/setup.c5
-rw-r--r--arch/sh/boards/mach-edosk7705/Makefile1
-rw-r--r--arch/sh/boards/mach-edosk7705/io.c61
-rw-r--r--arch/sh/boards/mach-edosk7705/setup.c9
-rw-r--r--arch/sh/boards/mach-hp6xx/pm.c78
-rw-r--r--arch/sh/boards/mach-microdev/Makefile5
-rw-r--r--arch/sh/boards/mach-microdev/fdc37c93xapm.c160
-rw-r--r--arch/sh/boards/mach-microdev/irq.c36
-rw-r--r--arch/sh/boards/mach-microdev/led.c101
-rw-r--r--arch/sh/boards/mach-microdev/setup.c196
-rw-r--r--arch/sh/boards/mach-migor/setup.c21
-rw-r--r--arch/sh/boards/mach-rsk/Kconfig18
-rw-r--r--arch/sh/boards/mach-rsk/Makefile2
-rw-r--r--arch/sh/boards/mach-rsk/devices-rsk7203.c (renamed from arch/sh/boards/board-rsk7203.c)76
-rw-r--r--arch/sh/boards/mach-rsk/setup.c106
-rw-r--r--arch/sh/boards/mach-se/7343/Makefile2
-rw-r--r--arch/sh/boards/mach-se/7343/io.c273
-rw-r--r--arch/sh/boards/mach-se/7343/setup.c126
-rw-r--r--arch/sh/boards/mach-se/770x/setup.c4
-rw-r--r--arch/sh/boards/mach-se/7721/setup.c7
-rw-r--r--arch/sh/boards/mach-se/7722/setup.c10
-rw-r--r--arch/sh/boards/mach-sh03/setup.c59
-rw-r--r--arch/sh/boards/mach-systemh/irq.c37
31 files changed, 663 insertions, 1042 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 50467f9d0d0..861914747e4 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -126,10 +126,12 @@ config SH_RTS7751R2D
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
-config SH_RSK7203
- bool "RSK7203"
- select GENERIC_GPIO
- depends on CPU_SUBTYPE_SH7203
+config SH_RSK
+ bool "Renesas Starter Kit"
+ depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203
+ help
+ Select this option if configuring for any of the RSK+ MCU
+ evaluation platforms.
config SH_SDK7780
bool "SDK7780R3"
@@ -253,6 +255,7 @@ source "arch/sh/boards/mach-r2d/Kconfig"
source "arch/sh/boards/mach-highlander/Kconfig"
source "arch/sh/boards/mach-sdk7780/Kconfig"
source "arch/sh/boards/mach-migor/Kconfig"
+source "arch/sh/boards/mach-rsk/Kconfig"
if SH_MAGIC_PANEL_R2
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index d9efa392372..269ae2be49e 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -3,7 +3,6 @@
#
obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o
obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
-obj-$(CONFIG_SH_RSK7203) += board-rsk7203.o
obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
obj-$(CONFIG_SH_SHMIN) += board-shmin.o
obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 8881a643ac3..1c67cba6e34 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -197,6 +197,10 @@ static struct resource lcdc_resources[] = {
.end = 0xfe941fff,
.flags = IORESOURCE_MEM,
},
+ [1] = {
+ .start = 28,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device lcdc_device = {
@@ -303,6 +307,7 @@ static struct resource ceu_resources[] = {
static struct platform_device ceu_device = {
.name = "sh_mobile_ceu",
+ .id = 0, /* "ceu0" clock */
.num_resources = ARRAY_SIZE(ceu_resources),
.resource = ceu_resources,
.dev = {
@@ -344,7 +349,6 @@ static int __init ap325rxa_devices_setup(void)
gpio_export(GPIO_PTF7, 0);
/* LCDC */
- clk_always_enable("mstp200");
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
@@ -375,7 +379,6 @@ static int __init ap325rxa_devices_setup(void)
gpio_direction_output(GPIO_PTS3, 1);
/* CEU */
- clk_always_enable("mstp203");
gpio_request(GPIO_FN_VIO_CLK2, NULL);
gpio_request(GPIO_FN_VIO_VD2, NULL);
gpio_request(GPIO_FN_VIO_HD2, NULL);
diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c
index 5cc0867de5a..b1dcbbc8918 100644
--- a/arch/sh/boards/board-shmin.c
+++ b/arch/sh/boards/board-shmin.c
@@ -22,21 +22,13 @@ static void __init init_shmin_irq(void)
plat_irq_setup_pins(IRQ_MODE_IRQ);
}
-static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
+static void __init shmin_setup(char **cmdline_p)
{
- static int dummy;
-
- if ((port & ~0x1f) == SHMIN_NE_BASE)
- return (void __iomem *)(SHMIN_IO_BASE + port);
-
- dummy = 0;
-
- return &dummy;
-
+ __set_io_port_base(SHMIN_IO_BASE);
}
static struct sh_machine_vector mv_shmin __initmv = {
.mv_name = "SHMIN",
+ .mv_setup = shmin_setup,
.mv_init_irq = init_shmin_irq,
- .mv_ioport_map = shmin_ioport_map,
};
diff --git a/arch/sh/boards/mach-cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
index 489a8f86736..cafe1ac3b29 100644
--- a/arch/sh/boards/mach-cayman/Makefile
+++ b/arch/sh/boards/mach-cayman/Makefile
@@ -2,4 +2,3 @@
# Makefile for the Hitachi Cayman specific parts of the kernel
#
obj-y := setup.o irq.o
-obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index ceb37ae92c7..da62ad51699 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -94,31 +94,11 @@ static void ack_cayman_irq(unsigned int irq)
disable_cayman_irq(irq);
}
-static void end_cayman_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_cayman_irq(irq);
-}
-
-static unsigned int startup_cayman_irq(unsigned int irq)
-{
- enable_cayman_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void shutdown_cayman_irq(unsigned int irq)
-{
- disable_cayman_irq(irq);
-}
-
-struct hw_interrupt_type cayman_irq_type = {
- .typename = "Cayman-IRQ",
- .startup = startup_cayman_irq,
- .shutdown = shutdown_cayman_irq,
- .enable = enable_cayman_irq,
- .disable = disable_cayman_irq,
- .ack = ack_cayman_irq,
- .end = end_cayman_irq,
+struct irq_chip cayman_irq_type = {
+ .name = "Cayman-IRQ",
+ .unmask = enable_cayman_irq,
+ .mask = disable_cayman_irq,
+ .mask_ack = ack_cayman_irq,
};
int cayman_irq_demux(int evt)
@@ -187,8 +167,9 @@ void init_cayman_irq(void)
return;
}
- for (i=0; i<NR_EXT_IRQS; i++) {
- irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
+ for (i = 0; i < NR_EXT_IRQS; i++) {
+ set_irq_chip_and_handler(START_EXT_IRQS + i, &cayman_irq_type,
+ handle_level_irq);
}
/* Setup the SMSC interrupt */
diff --git a/arch/sh/boards/mach-cayman/led.c b/arch/sh/boards/mach-cayman/led.c
deleted file mode 100644
index a808eac4ecd..00000000000
--- a/arch/sh/boards/mach-cayman/led.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/sh/boards/cayman/led.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Flash the LEDs
- */
-#include <asm/io.h>
-
-/*
-** It is supposed these functions to be used for a low level
-** debugging (via Cayman LEDs), hence to be available as soon
-** as possible.
-** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped
-** (this happen when IRQ are initialized... quite late).
-** These triky dependencies should be removed. Temporary, it
-** may be enough to NOP until EPLD is mapped.
-*/
-
-extern unsigned long epld_virt;
-
-#define LED_ADDR (epld_virt + 0x008)
-#define HDSP2534_ADDR (epld_virt + 0x100)
-
-void mach_led(int position, int value)
-{
- if (!epld_virt)
- return;
-
- if (value)
- ctrl_outl(0, LED_ADDR);
- else
- ctrl_outl(1, LED_ADDR);
-
-}
-
-void mach_alphanum(int position, unsigned char value)
-{
- if (!epld_virt)
- return;
-
- ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2));
-}
-
-void mach_alphanum_brightness(int setting)
-{
- ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0);
-}
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index 67bdc33dd41..f55fc8e795e 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -10,106 +10,90 @@
*/
#include <linux/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/irq.h>
#include <mach/sysasic.h>
-/* Dreamcast System ASIC Hardware Events -
-
- The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
- hardware events from system peripherals and triggering an SH7750 IRQ.
- Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
- set in the Event Mask Registers (EMRs). When a hardware event is
- triggered, it's corresponding bit in the Event Status Registers (ESRs)
- is set, and that bit should be rewritten to the ESR to acknowledge that
- event.
-
- There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908. Event
- types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
- groups of EMRs that parallel the ESRs. Each EMR group corresponds to an
- IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
- triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
-
- In the kernel, these events are mapped to virtual IRQs so that drivers can
- respond to them as they would a normal interrupt. In order to keep this
- mapping simple, the events are mapped as:
-
- 6900/6910 - Events 0-31, IRQ 13
- 6904/6924 - Events 32-63, IRQ 11
- 6908/6938 - Events 64-95, IRQ 9
-
-*/
+/*
+ * Dreamcast System ASIC Hardware Events -
+ *
+ * The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
+ * hardware events from system peripherals and triggering an SH7750 IRQ.
+ * Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
+ * set in the Event Mask Registers (EMRs). When a hardware event is
+ * triggered, its corresponding bit in the Event Status Registers (ESRs)
+ * is set, and that bit should be rewritten to the ESR to acknowledge that
+ * event.
+ *
+ * There are three 32-bit ESRs located at 0xa05f6900 - 0xa05f6908. Event
+ * types can be found in arch/sh/include/mach-dreamcast/mach/sysasic.h.
+ * There are three groups of EMRs that parallel the ESRs. Each EMR group
+ * corresponds to an IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13,
+ * 0xa05f6920 - 0xa05f6928 triggers IRQ 11, and 0xa05f6930 - 0xa05f6938
+ * triggers IRQ 9.
+ *
+ * In the kernel, these events are mapped to virtual IRQs so that drivers can
+ * respond to them as they would a normal interrupt. In order to keep this
+ * mapping simple, the events are mapped as:
+ *
+ * 6900/6910 - Events 0-31, IRQ 13
+ * 6904/6924 - Events 32-63, IRQ 11
+ * 6908/6938 - Events 64-95, IRQ 9
+ *
+ */
#define ESR_BASE 0x005f6900 /* Base event status register */
#define EMR_BASE 0x005f6910 /* Base event mask register */
-/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
- 1 = 0x6920, 2 = 0x6930; also determine the event offset */
+/*
+ * Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
+ * 1 = 0x6920, 2 = 0x6930; also determine the event offset.
+ */
#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
/* Return the hardware event's bit positon within the EMR/ESR */
#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
-/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
- (logically mapped to the corresponding bit for the hardware event). */
+/*
+ * For each of these *_irq routines, the IRQ passed in is the virtual IRQ
+ * (logically mapped to the corresponding bit for the hardware event).
+ */
/* Disable the hardware event by masking its bit in its EMR */
static inline void disable_systemasic_irq(unsigned int irq)
{
- __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
- __u32 mask;
+ __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+ __u32 mask;
- mask = inl(emr);
- mask &= ~(1 << EVENT_BIT(irq));
- outl(mask, emr);
+ mask = inl(emr);
+ mask &= ~(1 << EVENT_BIT(irq));
+ outl(mask, emr);
}
/* Enable the hardware event by setting its bit in its EMR */
static inline void enable_systemasic_irq(unsigned int irq)
{
- __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
- __u32 mask;
+ __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+ __u32 mask;
- mask = inl(emr);
- mask |= (1 << EVENT_BIT(irq));
- outl(mask, emr);
+ mask = inl(emr);
+ mask |= (1 << EVENT_BIT(irq));
+ outl(mask, emr);
}
/* Acknowledge a hardware event by writing its bit back to its ESR */
-static void ack_systemasic_irq(unsigned int irq)
-{
- __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
- disable_systemasic_irq(irq);
- outl((1 << EVENT_BIT(irq)), esr);
-}
-
-/* After a IRQ has been ack'd and responded to, it needs to be renabled */
-static void end_systemasic_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_systemasic_irq(irq);
-}
-
-static unsigned int startup_systemasic_irq(unsigned int irq)
-{
- enable_systemasic_irq(irq);
-
- return 0;
-}
-
-static void shutdown_systemasic_irq(unsigned int irq)
+static void mask_ack_systemasic_irq(unsigned int irq)
{
- disable_systemasic_irq(irq);
+ __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
+ disable_systemasic_irq(irq);
+ outl((1 << EVENT_BIT(irq)), esr);
}
-struct hw_interrupt_type systemasic_int = {
- .typename = "System ASIC",
- .startup = startup_systemasic_irq,
- .shutdown = shutdown_systemasic_irq,
- .enable = enable_systemasic_irq,
- .disable = disable_systemasic_irq,
- .ack = ack_systemasic_irq,
- .end = end_systemasic_irq,
+struct irq_chip systemasic_int = {
+ .name = "System ASIC",
+ .mask = disable_systemasic_irq,
+ .mask_ack = mask_ack_systemasic_irq,
+ .unmask = enable_systemasic_irq,
};
/*
@@ -117,37 +101,37 @@ struct hw_interrupt_type systemasic_int = {
*/
int systemasic_irq_demux(int irq)
{
- __u32 emr, esr, status, level;
- __u32 j, bit;
-
- switch (irq) {
- case 13:
- level = 0;
- break;
- case 11:
- level = 1;
- break;
- case 9:
- level = 2;
- break;
- default:
- return irq;
- }
- emr = EMR_BASE + (level << 4) + (level << 2);
- esr = ESR_BASE + (level << 2);
-
- /* Mask the ESR to filter any spurious, unwanted interrupts */
- status = inl(esr);
- status &= inl(emr);
-
- /* Now scan and find the first set bit as the event to map */
- for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
- if (status & bit) {
- irq = HW_EVENT_IRQ_BASE + j + (level << 5);
- return irq;
- }
- }
-
- /* Not reached */
- return irq;
+ __u32 emr, esr, status, level;
+ __u32 j, bit;
+
+ switch (irq) {
+ case 13:
+ level = 0;
+ break;
+ case 11:
+ level = 1;
+ break;
+ case 9:
+ level = 2;
+ break;
+ default:
+ return irq;
+ }
+ emr = EMR_BASE + (level << 4) + (level << 2);
+ esr = ESR_BASE + (level << 2);
+
+ /* Mask the ESR to filter any spurious, unwanted interrupts */
+ status = inl(esr);
+ status &= inl(emr);
+
+ /* Now scan and find the first set bit as the event to map */
+ for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
+ if (status & bit) {
+ irq = HW_EVENT_IRQ_BASE + j + (level << 5);
+ return irq;
+ }
+ }
+
+ /* Not reached */
+ return irq;
}
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index 7d944fc75e9..d1bee4884cd 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -28,7 +28,7 @@
#include <asm/machvec.h>
#include <mach/sysasic.h>
-extern struct hw_interrupt_type systemasic_int;
+extern struct irq_chip systemasic_int;
extern void aica_time_init(void);
extern int gapspci_init(void);
extern int systemasic_irq_demux(int);
@@ -47,7 +47,8 @@ static void __init dreamcast_setup(char **cmdline_p)
/* Assign all virtual IRQs to the System ASIC int. handler */
for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
- irq_desc[i].chip = &systemasic_int;
+ set_irq_chip_and_handler(i, &systemasic_int,
+ handle_level_irq);
board_time_init = aica_time_init;
diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index 14bdd531f11..cd54acb5149 100644
--- a/arch/sh/boards/mach-edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
@@ -3,4 +3,3 @@
#
obj-y := setup.o io.o
-
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 7d153e50a01..5b9c57c4324 100644
--- a/arch/sh/boards/mach-edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
@@ -10,28 +10,24 @@
#include <linux/kernel.h>
#include <linux/types.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/edosk7705.h>
#include <asm/addrspace.h>
#define SMC_IOADDR 0xA2000000
-#define maybebadio(name,port) \
- printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
+static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
{
- if (port >= 0x300 && port < 0x320) {
- /* SMC91C96 registers are 4 byte aligned rather than the
- * usual 2 byte!
- */
- return SMC_IOADDR + ( (port - 0x300) * 2);
- }
+ /*
+ * SMC91C96 registers are 4 byte aligned rather than the
+ * usual 2 byte!
+ */
+ if (port >= 0x300 && port < 0x320)
+ return SMC_IOADDR + ((port - 0x300) * 2);
- maybebadio(sh_edosk7705_isa_port2addr, port);
- return port;
+ maybebadio(port);
+ return port;
}
/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
@@ -42,53 +38,34 @@ unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
*/
unsigned char sh_edosk7705_inb(unsigned long port)
{
- if (port >= 0x300 && port < 0x320 && port & 0x01) {
- return (volatile unsigned char)(generic_inw(port -1) >> 8);
- }
- return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port);
-}
+ if (port >= 0x300 && port < 0x320 && port & 0x01)
+ return __raw_readw(port - 1) >> 8;
-unsigned int sh_edosk7705_inl(unsigned long port)
-{
- return *(volatile unsigned long *)port;
+ return __raw_readb(sh_edosk7705_isa_port2addr(port));
}
void sh_edosk7705_outb(unsigned char value, unsigned long port)
{
if (port >= 0x300 && port < 0x320 && port & 0x01) {
- generic_outw(((unsigned short)value << 8), port -1);
+ __raw_writew(((unsigned short)value << 8), port - 1);
return;
}
- *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value;
-}
-void sh_edosk7705_outl(unsigned int value, unsigned long port)
-{
- *(volatile unsigned long *)port = value;
+ __raw_writeb(value, sh_edosk7705_isa_port2addr(port));
}
void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
{
unsigned char *p = addr;
- while (count--) *p++ = sh_edosk7705_inb(port);
-}
-void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count)
-{
- unsigned long *p = (unsigned long*)addr;
while (count--)
- *p++ = *(volatile unsigned long *)port;
+ *p++ = sh_edosk7705_inb(port);
}
void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
{
- unsigned char *p = (unsigned char*)addr;
- while (count--) sh_edosk7705_outb(*p++, port);
-}
+ unsigned char *p = (unsigned char *)addr;
-void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned long *p = (unsigned long*)addr;
- while (count--) sh_edosk7705_outl(*p++, port);
+ while (count--)
+ sh_edosk7705_outb(*p++, port);
}
-
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index ab3f47bffdf..d59225e26fb 100644
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
@@ -9,6 +9,7 @@
* board by S. Dunn, 2003.
*/
#include <linux/init.h>
+#include <linux/irq.h>
#include <asm/machvec.h>
#include <mach/edosk7705.h>
@@ -26,18 +27,10 @@ static struct sh_machine_vector mv_edosk7705 __initmv = {
.mv_nr_irqs = 80,
.mv_inb = sh_edosk7705_inb,
- .mv_inl = sh_edosk7705_inl,
.mv_outb = sh_edosk7705_outb,
- .mv_outl = sh_edosk7705_outl,
-
- .mv_inl_p = sh_edosk7705_inl,
- .mv_outl_p = sh_edosk7705_outl,
.mv_insb = sh_edosk7705_insb,
- .mv_insl = sh_edosk7705_insl,
.mv_outsb = sh_edosk7705_outsb,
- .mv_outsl = sh_edosk7705_outsl,
- .mv_isa_port2addr = sh_edosk7705_isa_port2addr,
.mv_init_irq = sh_edosk7705_init_irq,
};
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index 64af1f2eef0..d936c1af762 100644
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -10,15 +10,91 @@
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/hd64461.h>
#include <mach/hp6xx.h>
#include <cpu/dac.h>
-#include <asm/pm.h>
+#include <asm/freq.h>
+#include <asm/watchdog.h>
+
+#define INTR_OFFSET 0x600
#define STBCR 0xffffff82
#define STBCR2 0xffffff88
+#define STBCR_STBY 0x80
+#define STBCR_MSTP2 0x04
+
+#define MCR 0xffffff68
+#define RTCNT 0xffffff70
+
+#define MCR_RMODE 2
+#define MCR_RFSH 4
+
+extern u8 wakeup_start;
+extern u8 wakeup_end;
+
+static void pm_enter(void)
+{
+ u8 stbcr, csr;
+ u16 frqcr, mcr;
+ u32 vbr_new, vbr_old;
+
+ set_bl_bit();
+
+ /* set wdt */
+ csr = sh_wdt_read_csr();
+ csr &= ~WTCSR_TME;
+ csr |= WTCSR_CKS_4096;
+ sh_wdt_write_csr(csr);
+ csr = sh_wdt_read_csr();
+ sh_wdt_write_cnt(0);
+
+ /* disable PLL1 */
+ frqcr = ctrl_inw(FRQCR);
+ frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
+ ctrl_outw(frqcr, FRQCR);
+
+ /* enable standby */
+ stbcr = ctrl_inb(STBCR);
+ ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+
+ /* set self-refresh */
+ mcr = ctrl_inw(MCR);
+ ctrl_outw(mcr & ~MCR_RFSH, MCR);
+
+ /* set interrupt handler */
+ asm volatile("stc vbr, %0" : "=r" (vbr_old));
+ vbr_new = get_zeroed_page(GFP_ATOMIC);
+ udelay(50);
+ memcpy((void*)(vbr_new + INTR_OFFSET),
+ &wakeup_start, &wakeup_end - &wakeup_start);
+ asm volatile("ldc %0, vbr" : : "r" (vbr_new));
+
+ ctrl_outw(0, RTCNT);
+ ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
+
+ cpu_sleep();
+
+ asm volatile("ldc %0, vbr" : : "r" (vbr_old));
+
+ free_page(vbr_new);
+
+ /* enable PLL1 */
+ frqcr = ctrl_inw(FRQCR);
+ frqcr |= FRQCR_PSTBY;
+ ctrl_outw(frqcr, FRQCR);
+ udelay(50);
+ frqcr |= FRQCR_PLLEN;
+ ctrl_outw(frqcr, FRQCR);
+
+ ctrl_outb(stbcr, STBCR);
+
+ clear_bl_bit();
+}
+
static int hp6x0_pm_enter(suspend_state_t state)
{
u8 stbcr, stbcr2;
diff --git a/arch/sh/boards/mach-microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
index 1387dd6c85e..4e3588e8806 100644
--- a/arch/sh/boards/mach-microdev/Makefile
+++ b/arch/sh/boards/mach-microdev/Makefile
@@ -2,7 +2,4 @@
# Makefile for the SuperH MicroDev specific parts of the kernel
#
-obj-y := setup.o irq.o io.o
-
-obj-$(CONFIG_HEARTBEAT) += led.o
-
+obj-y := setup.o irq.o io.o fdc37c93xapm.o
diff --git a/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/arch/sh/boards/mach-microdev/fdc37c93xapm.c
new file mode 100644
index 00000000000..458a7cf5fb4
--- /dev/null
+++ b/arch/sh/boards/mach-microdev/fdc37c93xapm.c
@@ -0,0 +1,160 @@
+/*
+ *
+ * Setup for the SMSC FDC37C93xAPM
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004, 2005 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/microdev.h>
+
+#define SMSC_CONFIG_PORT_ADDR (0x3F0)
+#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1)
+
+#define SMSC_ENTER_CONFIG_KEY 0x55
+#define SMSC_EXIT_CONFIG_KEY 0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */
+#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */
+#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */
+#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */
+#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */
+#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */
+#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */
+#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */
+#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */
+#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */
+
+#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */
+#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */
+#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */
+#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */
+#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */
+#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */
+#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */
+
+#define SMSC_READ_INDEXED(index) ({ \
+ outb((index), SMSC_INDEX_PORT_ADDR); \
+ inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_WRITE_INDEXED(val, index) ({ \
+ outb((index), SMSC_INDEX_PORT_ADDR); \
+ outb((val), SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */
+#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */
+#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */
+#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */
+
+#define SERIAL1_PRIMARY_BASE 0x03f8
+#define SERIAL2_PRIMARY_BASE 0x02f8
+
+#define MSB(x) ( (x) >> 8 )
+#define LSB(x) ( (x) & 0xff )
+
+ /* General-Purpose base address on CPU-board FPGA */
+#define MICRODEV_FPGA_GP_BASE 0xa6100000ul
+
+static int __init smsc_superio_setup(void)
+{
+
+ unsigned char devid, devrev;
+
+ /* Initially the chip is in run state */
+ /* Put it into configuration state */
+ outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+ /* Read device ID info */
+ devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+ devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+
+ if ((devid == 0x30) && (devrev == 0x01))
+ printk("SMSC FDC37C93xAPM SuperIO device detected\n");
+ else
+ return -ENODEV;
+
+ /* Select the keyboard device */
+ SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ /* enable it */
+ SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+ /* enable the interrupts */
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
+
+ /* Select the Serial #1 device */
+ SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ /* enable it */
+ SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+ /* program with port addresses */
+ SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+ SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+ /* enable the interrupts */
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
+
+ /* Select the Serial #2 device */
+ SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ /* enable it */
+ SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+ /* program with port addresses */
+ SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+ SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+ /* enable the interrupts */
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
+
+ /* Select the IDE#1 device */
+ SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ /* enable it */
+ SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+ /* program with port addresses */
+ SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+ SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+ SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
+ SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
+ /* select the interrupt */
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
+
+ /* Select the IDE#2 device */
+ SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ /* enable it */
+ SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+ /* program with port addresses */
+ SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+ SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+ /* select the interrupt */
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
+
+ /* Select the configuration registers */
+ SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
+ /* enable the appropriate GPIO pins for IDE functionality:
+ * bit[0] In/Out 1==input; 0==output
+ * bit[1] Polarity 1==invert; 0==no invert
+ * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable
+ * bit[3:4] Function Select 00==original; 01==Alternate Function #1
+ */
+ SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+ SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+ SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+ SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+ SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
+
+ /* Exit the configuration state */
+ outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+ return 0;
+}
+device_initcall(smsc_superio_setup);
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index 702753cbd28..b551963579c 100644
--- a/arch/sh/boards/mach-microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
@@ -67,27 +67,13 @@ static const struct {
static void enable_microdev_irq(unsigned int irq);
static void disable_microdev_irq(unsigned int irq);
-
- /* shutdown is same as "disable" */
-#define shutdown_microdev_irq disable_microdev_irq
-
static void mask_and_ack_microdev(unsigned int);
-static void end_microdev_irq(unsigned int irq);
-
-static unsigned int startup_microdev_irq(unsigned int irq)
-{
- enable_microdev_irq(irq);
- return 0; /* never anything pending */
-}
-static struct hw_interrupt_type microdev_irq_type = {
- .typename = "MicroDev-IRQ",
- .startup = startup_microdev_irq,
- .shutdown = shutdown_microdev_irq,
- .enable = enable_microdev_irq,
- .disable = disable_microdev_irq,
+static struct irq_chip microdev_irq_type = {
+ .name = "MicroDev-IRQ",
+ .unmask = enable_microdev_irq,
+ .mask = disable_microdev_irq,
.ack = mask_and_ack_microdev,
- .end = end_microdev_irq
};
static void disable_microdev_irq(unsigned int irq)
@@ -130,11 +116,11 @@ static void enable_microdev_irq(unsigned int irq)
ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
}
- /* This functions sets the desired irq handler to be a MicroDev type */
+/* This function sets the desired irq handler to be a MicroDev type */
static void __init make_microdev_irq(unsigned int irq)
{
disable_irq_nosync(irq);
- irq_desc[irq].chip = &microdev_irq_type;
+ set_irq_chip_and_handler(irq, &microdev_irq_type, handle_level_irq);
disable_microdev_irq(irq);
}
@@ -143,17 +129,11 @@ static void mask_and_ack_microdev(unsigned int irq)
disable_microdev_irq(irq);
}
-static void end_microdev_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_microdev_irq(irq);
-}
-
extern void __init init_microdev_irq(void)
{
int i;
- /* disable interrupts on the FPGA INTC register */
+ /* disable interrupts on the FPGA INTC register */
ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
@@ -179,5 +159,3 @@ extern void microdev_print_fpga_intc_status(void)
printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
printk("-------------------------------------------------------------------------------\n");
}
-
-
diff --git a/arch/sh/boards/mach-microdev/led.c b/arch/sh/boards/mach-microdev/led.c
deleted file mode 100644
index 36e54b47a75..00000000000
--- a/arch/sh/boards/mach-microdev/led.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/sh/boards/superh/microdev/led.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- * Copyright (C) 2003 Richard Curnow (Richard.Curnow@superh.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- */
-
-#include <asm/io.h>
-
-#define LED_REGISTER 0xa6104d20
-
-static void mach_led_d9(int value)
-{
- unsigned long reg;
- reg = ctrl_inl(LED_REGISTER);
- reg &= ~1;
- reg |= (value & 1);
- ctrl_outl(reg, LED_REGISTER);
- return;
-}
-
-static void mach_led_d10(int value)
-{
- unsigned long reg;
- reg = ctrl_inl(LED_REGISTER);
- reg &= ~2;
- reg |= ((value & 1) << 1);
- ctrl_outl(reg, LED_REGISTER);
- return;
-}
-
-
-#ifdef CONFIG_HEARTBEAT
-#include <linux/sched.h>
-
-static unsigned char banner_table[] = {
- 0x11, 0x01, 0x11, 0x01, 0x11, 0x03,
- 0x11, 0x01, 0x11, 0x01, 0x13, 0x03,
- 0x11, 0x01, 0x13, 0x01, 0x13, 0x01, 0x11, 0x03,
- 0x11, 0x03,
- 0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
- 0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x11, 0x07,
- 0x13, 0x01, 0x13, 0x03,
- 0x11, 0x01, 0x11, 0x03,
- 0x13, 0x01, 0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
- 0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
- 0x13, 0x01, 0x13, 0x01, 0x13, 0x03,
- 0x13, 0x01, 0x11, 0x01, 0x11, 0x03,
- 0x11, 0x03,
- 0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x13, 0x07,
- 0xff
-};
-
-static void banner(void)
-{
- static int pos = 0;
- static int count = 0;
-
- if (count) {
- count--;
- } else {
- int val = banner_table[pos];
- if (val == 0xff) {
- pos = 0;
- val = banner_table[pos];
- }
- pos++;
- mach_led_d10((val >> 4) & 1);
- count = 10 * (val & 0xf);
- }
-}
-
-/* From heartbeat_harp in the stboards directory */
-/* acts like an actual heart beat -- ie thump-thump-pause... */
-void microdev_heartbeat(void)
-{
- static unsigned cnt = 0, period = 0, dist = 0;
-
- if (cnt == 0 || cnt == dist)
- mach_led_d9(1);
- else if (cnt == 7 || cnt == dist+7)
- mach_led_d9(0);
-
- if (++cnt > period) {
- cnt = 0;
- /* The hyperbolic function below modifies the heartbeat period
- * length in dependency of the current (5min) load. It goes
- * through the points f(0)=126, f(1)=86, f(5)=51,
- * f(inf)->30. */
- period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
- dist = period / 4;
- }
-
- banner();
-}
-
-#endif
diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index a9202fe3cb5..d1df2a4fb9b 100644
--- a/arch/sh/boards/mach-microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
@@ -17,70 +17,12 @@
#include <mach/microdev.h>
#include <asm/io.h>
#include <asm/machvec.h>
-
-extern void microdev_heartbeat(void);
-
-
-/****************************************************************************/
-
-
- /*
- * Setup for the SMSC FDC37C93xAPM
- */
-#define SMSC_CONFIG_PORT_ADDR (0x3F0)
-#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1)
-
-#define SMSC_ENTER_CONFIG_KEY 0x55
-#define SMSC_EXIT_CONFIG_KEY 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */
-#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */
-#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */
-#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */
-#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */
-#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */
-#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */
-#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */
-#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */
-#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */
-
-#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */
-#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */
-#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */
-#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */
-#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */
-#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */
-#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */
-
-#define SMSC_READ_INDEXED(index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_WRITE_INDEXED(val, index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- outb((val), SMSC_DATA_PORT_ADDR); })
-
-#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */
-#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */
-#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */
-#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */
-
-#define SERIAL1_PRIMARY_BASE 0x03f8
-#define SERIAL2_PRIMARY_BASE 0x02f8
-
-#define MSB(x) ( (x) >> 8 )
-#define LSB(x) ( (x) & 0xff )
-
- /* General-Purpose base address on CPU-board FPGA */
-#define MICRODEV_FPGA_GP_BASE 0xa6100000ul
-
- /* assume a Keyboard Controller is present */
-int microdev_kbd_controller_present = 1;
+#include <asm/sizes.h>
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x300,
- .end = 0x300 + 0x0001000 - 1,
+ .end = 0x300 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -97,7 +39,6 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
-#ifdef CONFIG_FB_S1D13XXX
static struct s1d13xxxfb_regval s1d13806_initregs[] = {
{ S1DREG_MISC, 0x00 },
{ S1DREG_COM_DISP_MODE, 0x00 },
@@ -216,12 +157,12 @@ static struct s1d13xxxfb_pdata s1d13806_platform_data = {
static struct resource s1d13806_resources[] = {
[0] = {
.start = 0x07200000,
- .end = 0x07200000 + 0x00200000 - 1,
+ .end = 0x07200000 + SZ_2M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0x07000000,
- .end = 0x07000000 + 0x00200000 - 1,
+ .end = 0x07000000 + SZ_2M - 1,
.flags = IORESOURCE_MEM,
},
};
@@ -236,145 +177,24 @@ static struct platform_device s1d13806_device = {
.platform_data = &s1d13806_platform_data,
},
};
-#endif
static struct platform_device *microdev_devices[] __initdata = {
&smc91x_device,
-#ifdef CONFIG_FB_S1D13XXX
&s1d13806_device,
-#endif
};
static int __init microdev_devices_setup(void)
{
return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
}
-
-/*
- * Setup for the SMSC FDC37C93xAPM
- */
-static int __init smsc_superio_setup(void)
-{
-
- unsigned char devid, devrev;
-
- /* Initially the chip is in run state */
- /* Put it into configuration state */
- outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- /* Read device ID info */
- devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
- devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
- if ( (devid==0x30) && (devrev==0x01) )
- {
- printk("SMSC FDC37C93xAPM SuperIO device detected\n");
- }
- else
- { /* not the device identity we expected */
- printk("Not detected a SMSC FDC37C93xAPM SuperIO device (devid=0x%02x, rev=0x%02x)\n",
- devid, devrev);
- /* inform the keyboard driver that we have no keyboard controller */
- microdev_kbd_controller_present = 0;
- /* little point in doing anything else in this functon */
- return 0;
- }
-
- /* Select the keyboard device */
- SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
-
- /* Select the Serial #1 device */
- SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the Serial #2 device */
- SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the IDE#1 device */
- SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
- /* select the interrupt */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the IDE#2 device */
- SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
- /* select the interrupt */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the configuration registers */
- SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
- /* enable the appropriate GPIO pins for IDE functionality:
- * bit[0] In/Out 1==input; 0==output
- * bit[1] Polarity 1==invert; 0==no invert
- * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable
- * bit[3:4] Function Select 00==original; 01==Alternate Function #1
- */
- SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
- SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
- SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
- SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
- SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
-
- /* Exit the configuration state */
- outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- return 0;
-}
-
-static void __init microdev_setup(char **cmdline_p)
-{
- int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
- const int fpgaRevision = *fpgaRevisionRegister;
- int * const CacheControlRegister = (int*)CCR;
-
- device_initcall(microdev_devices_setup);
- device_initcall(smsc_superio_setup);
-
- printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
- get_system_type(), fpgaRevision, *CacheControlRegister);
-}
+device_initcall(microdev_devices_setup);
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_sh4202_microdev __initmv = {
.mv_name = "SH4-202 MicroDev",
- .mv_setup = microdev_setup,
- .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */
+ .mv_nr_irqs = 72,
.mv_inb = microdev_inb,
.mv_inw = microdev_inw,
@@ -398,8 +218,4 @@ static struct sh_machine_vector mv_sh4202_microdev __initmv = {
.mv_outsl = microdev_outsl,
.mv_init_irq = init_microdev_irq,
-
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = microdev_heartbeat,
-#endif
};
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 97528198029..cc1408119c2 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -89,6 +89,7 @@ static struct resource sh_keysc_resources[] = {
static struct platform_device sh_keysc_device = {
.name = "sh_keysc",
+ .id = 0, /* "keysc0" clock */
.num_resources = ARRAY_SIZE(sh_keysc_resources),
.resource = sh_keysc_resources,
.dev = {
@@ -261,6 +262,8 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
.sys_bus_cfg = {
.ldmt2r = 0x06000a09,
.ldmt3r = 0x180e3418,
+ /* set 1s delay to encourage fsync() */
+ .deferred_io_msec = 1000,
},
}
#endif
@@ -273,6 +276,10 @@ static struct resource migor_lcdc_resources[] = {
.end = 0xfe941fff,
.flags = IORESOURCE_MEM,
},
+ [1] = {
+ .start = 28,
+ .flags = IORESOURCE_IRQ,
+ },
};
static struct platform_device migor_lcdc_device = {
@@ -300,6 +307,7 @@ static void camera_power_on(void)
gpio_set_value(GPIO_PTT3, 0);
mdelay(10);
gpio_set_value(GPIO_PTT3, 1);
+ mdelay(10); /* wait to let chip come out of reset */
}
static void camera_power_off(void)
@@ -432,6 +440,7 @@ static struct resource migor_ceu_resources[] = {
static struct platform_device migor_ceu_device = {
.name = "sh_mobile_ceu",
+ .id = 0, /* "ceu0" clock */
.num_resources = ARRAY_SIZE(migor_ceu_resources),
.resource = migor_ceu_resources,
.dev = {
@@ -479,7 +488,6 @@ static int __init migor_devices_setup(void)
ctrl_outl(0x00110080, BSC_CS4WCR);
/* KEYSC */
- clk_always_enable("mstp214"); /* KEYSC */
gpio_request(GPIO_FN_KEYOUT0, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT2, NULL);
@@ -501,7 +509,6 @@ static int __init migor_devices_setup(void)
gpio_request(GPIO_FN_IRQ6, NULL);
/* LCD Panel */
- clk_always_enable("mstp200"); /* LCDC */
#ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
@@ -554,7 +561,6 @@ static int __init migor_devices_setup(void)
#endif
/* CEU */
- clk_always_enable("mstp203"); /* CEU */
gpio_request(GPIO_FN_VIO_CLK2, NULL);
gpio_request(GPIO_FN_VIO_VD2, NULL);
gpio_request(GPIO_FN_VIO_HD2, NULL);
@@ -589,12 +595,3 @@ static int __init migor_devices_setup(void)
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
__initcall(migor_devices_setup);
-
-static void __init migor_setup(char **cmdline_p)
-{
-}
-
-static struct sh_machine_vector mv_migor __initmv = {
- .mv_name = "Migo-R",
- .mv_setup = migor_setup,
-};
diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig
new file mode 100644
index 00000000000..bff095dffc0
--- /dev/null
+++ b/arch/sh/boards/mach-rsk/Kconfig
@@ -0,0 +1,18 @@
+if SH_RSK
+
+choice
+ prompt "RSK+ options"
+ default SH_RSK7203
+
+config SH_RSK7201
+ bool "RSK7201"
+ depends on CPU_SUBTYPE_SH7201
+
+config SH_RSK7203
+ bool "RSK7203"
+ select GENERIC_GPIO
+ depends on CPU_SUBTYPE_SH7203
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/mach-rsk/Makefile b/arch/sh/boards/mach-rsk/Makefile
new file mode 100644
index 00000000000..498da75ce38
--- /dev/null
+++ b/arch/sh/boards/mach-rsk/Makefile
@@ -0,0 +1,2 @@
+obj-y := setup.o
+obj-$(CONFIG_SH_RSK7203) += devices-rsk7203.o
diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 58266f06134..73f743b9be8 100644
--- a/arch/sh/boards/board-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -50,73 +50,6 @@ static struct platform_device smc911x_device = {
},
};
-static const char *probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition *parsed_partitions;
-
-static struct mtd_partition rsk7203_partitions[] = {
- {
- .name = "Bootloader",
- .offset = 0x00000000,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x001c0000,
- }, {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .start = 0x20000000,
- .end = 0x20400000,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-static struct mtd_info *flash_mtd;
-
-static struct map_info rsk7203_flash_map = {
- .name = "RSK+ Flash",
- .size = 0x400000,
- .bankwidth = 2,
-};
-
-static void __init set_mtd_partitions(void)
-{
- int nr_parts = 0;
-
- simple_map_init(&rsk7203_flash_map);
- flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
- nr_parts = parse_mtd_partitions(flash_mtd, probes,
- &parsed_partitions, 0);
- /* If there is no partition table, used the hard coded table */
- if (nr_parts <= 0) {
- flash_data.parts = rsk7203_partitions;
- flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
- } else {
- flash_data.nr_parts = nr_parts;
- flash_data.parts = parsed_partitions;
- }
-}
-
static struct gpio_led rsk7203_gpio_leds[] = {
{
.name = "green",
@@ -155,7 +88,6 @@ static struct platform_device led_device = {
static struct platform_device *rsk7203_devices[] __initdata = {
&smc911x_device,
- &flash_device,
&led_device,
};
@@ -165,15 +97,7 @@ static int __init rsk7203_devices_setup(void)
gpio_request(GPIO_FN_TXD0, NULL);
gpio_request(GPIO_FN_RXD0, NULL);
- set_mtd_partitions();
return platform_add_devices(rsk7203_devices,
ARRAY_SIZE(rsk7203_devices));
}
device_initcall(rsk7203_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_rsk7203 __initmv = {
- .mv_name = "RSK+7203",
-};
diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c
new file mode 100644
index 00000000000..af64d030a5c
--- /dev/null
+++ b/arch/sh/boards/mach-rsk/setup.c
@@ -0,0 +1,106 @@
+/*
+ * Renesas Technology Europe RSK+ Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x001c0000,
+ }, {
+ .name = "Flash_FS",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+};
+
+static struct resource flash_resource = {
+ .start = 0x20000000,
+ .end = 0x20400000,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk_flash_map = {
+ .name = "RSK+ Flash",
+ .size = 0x400000,
+ .bankwidth = 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+ int nr_parts = 0;
+
+ simple_map_init(&rsk_flash_map);
+ flash_mtd = do_map_probe("cfi_probe", &rsk_flash_map);
+ nr_parts = parse_mtd_partitions(flash_mtd, probes,
+ &parsed_partitions, 0);
+ /* If there is no partition table, used the hard coded table */
+ if (nr_parts <= 0) {
+ flash_data.parts = rsk_partitions;
+ flash_data.nr_parts = ARRAY_SIZE(rsk_partitions);
+ } else {
+ flash_data.nr_parts = nr_parts;
+ flash_data.parts = parsed_partitions;
+ }
+}
+
+static struct platform_device *rsk_devices[] __initdata = {
+ &flash_device,
+};
+
+static int __init rsk_devices_setup(void)
+{
+ set_mtd_partitions();
+ return platform_add_devices(rsk_devices,
+ ARRAY_SIZE(rsk_devices));
+}
+device_initcall(rsk_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk __initmv = {
+ .mv_name = "RSK+",
+};
diff --git a/arch/sh/boards/mach-se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
index 3024796c620..4c3666a9379 100644
--- a/arch/sh/boards/mach-se/7343/Makefile
+++ b/arch/sh/boards/mach-se/7343/Makefile
@@ -2,4 +2,4 @@
# Makefile for the 7343 SolutionEngine specific parts of the kernel
#
-obj-y := setup.o io.o irq.o
+obj-y := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c
deleted file mode 100644
index 8741abc1da7..00000000000
--- a/arch/sh/boards/mach-se/7343/io.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * arch/sh/boards/se/7343/io.c
- *
- * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
- *
- */
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7343.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
- unsigned long start, end;
- unsigned long base;
- struct iop *(*check) (struct iop * p, unsigned long port);
- unsigned char (*inb) (struct iop * p, unsigned long port);
- unsigned short (*inw) (struct iop * p, unsigned long port);
- void (*outb) (struct iop * p, unsigned char value, unsigned long port);
- void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
- static int count;
-
- if (count < 100)
- count++;
-
- port &= 0xFFFF;
-
- if ((p->start <= port) && (port <= p->end))
- return p;
- else
- badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
- if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
- return p;
- return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
- return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
- return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- *(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
- *(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
- unsigned long v;
-
- if (port & 1)
- addr += 0x00400000;
- v = *(volatile unsigned char *) addr;
- return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
-
- if (port & 1)
- addr += 0x00400000;
- *(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
- badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
- .start = 0x00,
- .end = 0x0F,
- .base = 0x04000000,
- .check = simple_check,
- .inb = simple_inb,
- .inw = simple_inw,
- .outb = simple_outb,
- .outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_NE2000
-/* NE2000 pc card NIC */
-static struct iop neiop = {
- .start = 0x280,
- .end = 0x29f,
- .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */
- .check = simple_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
- .base = 0xb0600000,
- .check = ide_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
- if (0) ;
-#if defined(CONFIG_SMC91X)
- else if (laniop.check(&laniop, port))
- return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
- else if (neiop.check(&neiop, port))
- return &neiop;
-#endif
-#if defined(CONFIG_IDE)
- else if (cfiop.check(&cfiop, port))
- return &cfiop;
-#endif
- else
- return NULL;
-}
-
-static inline void
-delay(void)
-{
- ctrl_inw(0xac000000);
- ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh7343se_inb(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inb) (p, port);
-}
-
-unsigned char
-sh7343se_inb_p(unsigned long port)
-{
- unsigned char v = sh7343se_inb(port);
- delay();
- return v;
-}
-
-unsigned short
-sh7343se_inw(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inw) (p, port);
-}
-
-unsigned int
-sh7343se_inl(unsigned long port)
-{
- badio(inl, port);
-}
-
-void
-sh7343se_outb(unsigned char value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outb) (p, value, port);
-}
-
-void
-sh7343se_outb_p(unsigned char value, unsigned long port)
-{
- sh7343se_outb(value, port);
- delay();
-}
-
-void
-sh7343se_outw(unsigned short value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outw) (p, value, port);
-}
-
-void
-sh7343se_outl(unsigned int value, unsigned long port)
-{
- badio(outl, port);
-}
-
-void
-sh7343se_insb(unsigned long port, void *addr, unsigned long count)
-{
- unsigned char *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inb) (p, port);
-}
-
-void
-sh7343se_insw(unsigned long port, void *addr, unsigned long count)
-{
- unsigned short *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inw) (p, port);
-}
-
-void
-sh7343se_insl(unsigned long port, void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void
-sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned char *a = (unsigned char *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outb) (p, *a++, port);
-}
-
-void
-sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned short *a = (unsigned short *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outw) (p, *a++, port);
-}
-
-void
-sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- badio(outsw, port);
-}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index 486f40bf927..4de56f35f41 100644
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -1,36 +1,16 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/usb/isp116x.h>
+#include <linux/delay.h>
#include <asm/machvec.h>
#include <mach-se/mach/se7343.h>
#include <asm/heartbeat.h>
#include <asm/irq.h>
#include <asm/io.h>
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x10000000,
- .end = 0x1000000F,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /*
- * shared with other devices via externel
- * interrupt controller in FPGA...
- */
- .start = SMC_IRQ,
- .end = SMC_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
@@ -94,10 +74,83 @@ static struct platform_device nor_flash_device = {
.resource = nor_flash_resources,
};
+#define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ [0] = {
+ .iotype = UPIO_MEM,
+ .mapbase = 0x16000000,
+ .regshift = 1,
+ .flags = ST16C2550C_FLAGS,
+ .irq = UARTA_IRQ,
+ .uartclk = 7372800,
+ },
+ [1] = {
+ .iotype = UPIO_MEM,
+ .mapbase = 0x17000000,
+ .regshift = 1,
+ .flags = ST16C2550C_FLAGS,
+ .irq = UARTB_IRQ,
+ .uartclk = 7372800,
+ },
+ { },
+};
+
+static struct platform_device uart_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+static void isp116x_delay(struct device *dev, int delay)
+{
+ ndelay(delay);
+}
+
+static struct resource usb_resources[] = {
+ [0] = {
+ .start = 0x11800000,
+ .end = 0x11800001,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x11800002,
+ .end = 0x11800003,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = USB_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct isp116x_platform_data usb_platform_data = {
+ .sel15Kres = 1,
+ .oc_enable = 1,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_enable = 0,
+ .delay = isp116x_delay,
+};
+
+static struct platform_device usb_device = {
+ .name = "isp116x-hcd",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(usb_resources),
+ .resource = usb_resources,
+ .dev = {
+ .platform_data = &usb_platform_data,
+ },
+
+};
+
static struct platform_device *sh7343se_platform_devices[] __initdata = {
- &smc91x_device,
&heartbeat_device,
&nor_flash_device,
+ &uart_device,
+ &usb_device,
};
static int __init sh7343se_devices_setup(void)
@@ -126,27 +179,6 @@ static void __init sh7343se_setup(char **cmdline_p)
static struct sh_machine_vector mv_7343se __initmv = {
.mv_name = "SolutionEngine 7343",
.mv_setup = sh7343se_setup,
- .mv_nr_irqs = 108,
- .mv_inb = sh7343se_inb,
- .mv_inw = sh7343se_inw,
- .mv_inl = sh7343se_inl,
- .mv_outb = sh7343se_outb,
- .mv_outw = sh7343se_outw,
- .mv_outl = sh7343se_outl,
-
- .mv_inb_p = sh7343se_inb_p,
- .mv_inw_p = sh7343se_inw,
- .mv_inl_p = sh7343se_inl,
- .mv_outb_p = sh7343se_outb_p,
- .mv_outw_p = sh7343se_outw,
- .mv_outl_p = sh7343se_outl,
-
- .mv_insb = sh7343se_insb,
- .mv_insw = sh7343se_insw,
- .mv_insl = sh7343se_insl,
- .mv_outsb = sh7343se_outsb,
- .mv_outsw = sh7343se_outsw,
- .mv_outsl = sh7343se_outsl,
-
+ .mv_nr_irqs = SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_NR,
.mv_init_irq = init_7343se_IRQ,
};
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
index 9123d9687bf..527eb6b1261 100644
--- a/arch/sh/boards/mach-se/770x/setup.c
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -8,8 +8,9 @@
*/
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <asm/machvec.h>
#include <mach-se/mach/se.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
#include <asm/io.h>
#include <asm/smc37c93x.h>
#include <asm/heartbeat.h>
@@ -175,6 +176,7 @@ static struct platform_device *se_devices[] __initdata = {
static int __init se_devices_setup(void)
{
+ mrshpc_setup_windows();
return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
}
device_initcall(se_devices_setup);
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
index d3fc80ff4d8..55af4c36b43 100644
--- a/arch/sh/boards/mach-se/7721/setup.c
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -12,8 +12,9 @@
*/
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <asm/machvec.h>
#include <mach-se/mach/se7721.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
@@ -74,8 +75,8 @@ static struct platform_device *se7721_devices[] __initdata = {
static int __init se7721_devices_setup(void)
{
- return platform_add_devices(se7721_devices,
- ARRAY_SIZE(se7721_devices));
+ mrshpc_setup_windows();
+ return platform_add_devices(se7721_devices, ARRAY_SIZE(se7721_devices));
}
device_initcall(se7721_devices_setup);
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index fe6f96517e1..af84904ed86 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -15,9 +15,10 @@
#include <linux/ata_platform.h>
#include <linux/input.h>
#include <linux/smc91x.h>
+#include <mach-se/mach/se7722.h>
+#include <mach-se/mach/mrshpc.h>
#include <asm/machvec.h>
#include <asm/clock.h>
-#include <mach-se/mach/se7722.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_keysc.h>
@@ -130,6 +131,7 @@ static struct resource sh_keysc_resources[] = {
static struct platform_device sh_keysc_device = {
.name = "sh_keysc",
+ .id = 0, /* "keysc0" clock */
.num_resources = ARRAY_SIZE(sh_keysc_resources),
.resource = sh_keysc_resources,
.dev = {
@@ -146,10 +148,8 @@ static struct platform_device *se7722_devices[] __initdata = {
static int __init se7722_devices_setup(void)
{
- clk_always_enable("mstp214"); /* KEYSC */
-
- return platform_add_devices(se7722_devices,
- ARRAY_SIZE(se7722_devices));
+ mrshpc_setup_windows();
+ return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
}
device_initcall(se7722_devices_setup);
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
index 5771219be3f..74cfb4b8b03 100644
--- a/arch/sh/boards/mach-sh03/setup.c
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -9,6 +9,7 @@
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
#include <asm/io.h>
#include <asm/rtc.h>
#include <mach-sh03/mach/io.h>
@@ -20,19 +21,6 @@ static void __init init_sh03_IRQ(void)
plat_irq_setup_pins(IRQ_MODE_IRQ);
}
-extern void *cf_io_base;
-
-static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
-{
- if (PXSEG(port))
- return (void __iomem *)port;
- /* CompactFlash (IDE) */
- if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
- return (void __iomem *)((unsigned long)cf_io_base + port);
-
- return (void __iomem *)(port + PCI_IO_BASE);
-}
-
/* arch/sh/boards/sh03/rtc.c */
void sh03_time_init(void);
@@ -41,6 +29,30 @@ static void __init sh03_setup(char **cmdline_p)
board_time_init = sh03_time_init;
}
+static struct resource cf_ide_resources[] = {
+ [0] = {
+ .start = 0x1f0,
+ .end = 0x1f0 + 8,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = 0x1f0 + 0x206,
+ .end = 0x1f0 +8 + 0x206 + 8,
+ .flags = IORESOURCE_IO,
+ },
+ [2] = {
+ .start = IRL2_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cf_ide_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(cf_ide_resources),
+ .resource = cf_ide_resources,
+};
+
static struct resource heartbeat_resources[] = {
[0] = {
.start = 0xa0800000,
@@ -58,10 +70,30 @@ static struct platform_device heartbeat_device = {
static struct platform_device *sh03_devices[] __initdata = {
&heartbeat_device,
+ &cf_ide_device,
};
static int __init sh03_devices_setup(void)
{
+ pgprot_t prot;
+ unsigned long paddrbase;
+ void *cf_ide_base;
+
+ /* open I/O area window */
+ paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+ prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+ cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+ if (!cf_ide_base) {
+ printk("allocate_cf_area : can't open CF I/O window!\n");
+ return -ENOMEM;
+ }
+
+ /* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+ cf_ide_resources[0].start += (unsigned long)cf_ide_base;
+ cf_ide_resources[0].end += (unsigned long)cf_ide_base;
+ cf_ide_resources[1].start += (unsigned long)cf_ide_base;
+ cf_ide_resources[1].end += (unsigned long)cf_ide_base;
+
return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
}
__initcall(sh03_devices_setup);
@@ -70,6 +102,5 @@ static struct sh_machine_vector mv_sh03 __initmv = {
.mv_name = "Interface (CTP/PCI-SH03)",
.mv_setup = sh03_setup,
.mv_nr_irqs = 48,
- .mv_ioport_map = sh03_ioport_map,
.mv_init_irq = init_sh03_IRQ,
};
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
index 538406872a8..986a0e71d22 100644
--- a/arch/sh/boards/mach-systemh/irq.c
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -12,8 +12,8 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <mach/systemh7751.h>
#include <asm/smc37c93x.h>
@@ -24,35 +24,17 @@ static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
/* forward declaration */
-static unsigned int startup_systemh_irq(unsigned int irq);
-static void shutdown_systemh_irq(unsigned int irq);
static void enable_systemh_irq(unsigned int irq);
static void disable_systemh_irq(unsigned int irq);
static void mask_and_ack_systemh(unsigned int);
-static void end_systemh_irq(unsigned int irq);
-/* hw_interrupt_type */
-static struct hw_interrupt_type systemh_irq_type = {
- .typename = " SystemH Register",
- .startup = startup_systemh_irq,
- .shutdown = shutdown_systemh_irq,
- .enable = enable_systemh_irq,
- .disable = disable_systemh_irq,
+static struct irq_chip systemh_irq_type = {
+ .name = " SystemH Register",
+ .unmask = enable_systemh_irq,
+ .mask = disable_systemh_irq,
.ack = mask_and_ack_systemh,
- .end = end_systemh_irq
};
-static unsigned int startup_systemh_irq(unsigned int irq)
-{
- enable_systemh_irq(irq);
- return 0; /* never anything pending */
-}
-
-static void shutdown_systemh_irq(unsigned int irq)
-{
- disable_systemh_irq(irq);
-}
-
static void disable_systemh_irq(unsigned int irq)
{
if (systemh_irq_mask_register) {
@@ -86,16 +68,9 @@ static void mask_and_ack_systemh(unsigned int irq)
disable_systemh_irq(irq);
}
-static void end_systemh_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_systemh_irq(irq);
-}
-
void make_systemh_irq(unsigned int irq)
{
disable_irq_nosync(irq);
- irq_desc[irq].chip = &systemh_irq_type;
+ set_irq_chip_and_handler(irq, &systemh_irq_type, handle_level_irq);
disable_systemh_irq(irq);
}
-