summaryrefslogtreecommitdiffstats
path: root/arch/sh/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/drivers')
-rw-r--r--arch/sh/drivers/dma/dma-g2.c2
-rw-r--r--arch/sh/drivers/dma/dma-pvr2.c2
-rw-r--r--arch/sh/drivers/dma/dma-sh.c48
-rw-r--r--arch/sh/drivers/pci/ops-r7780rp.c2
-rw-r--r--arch/sh/drivers/pci/ops-rts7751r2d.c24
-rw-r--r--arch/sh/drivers/pci/pci-sh7751.c4
-rw-r--r--arch/sh/drivers/pci/pci-st40.c2
7 files changed, 45 insertions, 39 deletions
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 9cb07092418..0caf11bb7e2 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -51,7 +51,7 @@ static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa0
((g2_dma->channel[i].size - \
g2_dma->status[i].size) & 0x0fffffff)
-static irqreturn_t g2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t g2_dma_interrupt(int irq, void *dev_id)
{
int i;
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index c1b6bc23c10..838fad566ea 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -21,7 +21,7 @@
static unsigned int xfer_complete;
static int count;
-static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id)
{
if (get_dma_residue(PVR2_CASCADE_CHAN)) {
printk(KERN_WARNING "DMA: SH DMAC did not complete transfer "
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index cbbe8bce3d6..66078601335 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -19,23 +19,34 @@
#include <asm/io.h>
#include "dma-sh.h"
-static inline unsigned int get_dmte_irq(unsigned int chan)
-{
- unsigned int irq = 0;
+
+#ifdef CONFIG_CPU_SH4
+static struct ipr_data dmae_ipr_map[] = {
+ { DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
+};
+#endif
+static struct ipr_data dmte_ipr_map[] = {
/*
* Normally we could just do DMTE0_IRQ + chan outright, though in the
* case of the 7751R, the DMTE IRQs for channels > 4 start right above
* the SCIF
*/
- if (chan < 4) {
- irq = DMTE0_IRQ + chan;
- } else {
-#ifdef DMTE4_IRQ
- irq = DMTE4_IRQ + chan - 4;
-#endif
- }
+ { DMTE0_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
+ { DMTE0_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
+ { DMTE0_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
+ { DMTE0_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
+ { DMTE4_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
+ { DMTE4_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
+ { DMTE4_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
+ { DMTE4_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
+};
+static inline unsigned int get_dmte_irq(unsigned int chan)
+{
+ unsigned int irq = 0;
+ if (chan < ARRAY_SIZE(dmte_ipr_map))
+ irq = dmte_ipr_map[chan].irq;
return irq;
}
@@ -60,9 +71,9 @@ static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
* Besides that it needs to waken any waiting process, which should handle
* setting up the next transfer.
*/
-static irqreturn_t dma_tei(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t dma_tei(int irq, void *dev_id)
{
- struct dma_channel *chan = (struct dma_channel *)dev_id;
+ struct dma_channel *chan = dev_id;
u32 chcr;
chcr = ctrl_inl(CHCR[chan->chan]);
@@ -228,7 +239,7 @@ static inline int dmaor_reset(void)
}
#if defined(CONFIG_CPU_SH4)
-static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t dma_err(int irq, void *dummy)
{
dmaor_reset();
disable_irq(irq);
@@ -258,17 +269,16 @@ static int __init sh_dmac_init(void)
int i;
#ifdef CONFIG_CPU_SH4
- make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
+ make_ipr_irq(dmae_ipr_map, ARRAY_SIZE(dmae_ipr_map));
i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
if (unlikely(i < 0))
return i;
#endif
- for (i = 0; i < info->nr_channels; i++) {
- int irq = get_dmte_irq(i);
-
- make_ipr_irq(irq, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
- }
+ i = info->nr_channels;
+ if (i > ARRAY_SIZE(dmte_ipr_map))
+ i = ARRAY_SIZE(dmte_ipr_map);
+ make_ipr_irq(dmte_ipr_map, i);
/*
* Initialize DMAOR, and clean up any error flags that may have
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
index 6e3ba9c65b4..eeea1577e11 100644
--- a/arch/sh/drivers/pci/ops-r7780rp.c
+++ b/arch/sh/drivers/pci/ops-r7780rp.c
@@ -13,7 +13,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
-#include <asm/r7780rp/r7780rp.h>
+#include <asm/r7780rp.h>
#include <asm/io.h>
#include "pci-sh4.h"
diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c
index b68824c8b81..4a518d94804 100644
--- a/arch/sh/drivers/pci/ops-rts7751r2d.c
+++ b/arch/sh/drivers/pci/ops-rts7751r2d.c
@@ -10,28 +10,24 @@
*
* PCI initialization for the Renesas SH7751R RTS7751R2D board
*/
-
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
-#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/module.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <asm/rts7751r2d.h>
#include "pci-sh4.h"
+static u8 rts7751r2d_irq_tab[] __initdata = {
+ IRQ_PCISLOT1,
+ IRQ_PCISLOT2,
+ IRQ_PCMCIA,
+ IRQ_PCIETH,
+};
+
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
- switch (slot) {
- case 0: return IRQ_PCISLOT1; /* PCI Extend slot #1 */
- case 1: return IRQ_PCISLOT2; /* PCI Extend slot #2 */
- case 2: return IRQ_PCMCIA; /* PCI Cardbus Bridge */
- case 3: return IRQ_PCIETH; /* Realtek Ethernet controller */
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
+ return rts7751r2d_irq_tab[slot];
}
static struct resource sh7751_io_resource = {
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index dbe83788498..85e1ee2e2e7 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -155,7 +155,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
*/
pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
PCIBIOS_MIN_IO, (64 << 10),
- SH4_PCI_IO_BASE + PCIBIOS_MIN_IO);
+ SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO);
/*
* XXX: For now, leave this board-specific. In the event we have other
@@ -163,7 +163,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
*/
#ifdef CONFIG_SH_BIGSUR
bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10),
- SH4_PCI_IO_BASE + PCIBIOS_MIN_IO, 0);
+ SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO, 0);
#endif
/* Make sure the MSB's of IO window are set to access PCI space
diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c
index 4ab5ea6b35f..efecb3d5995 100644
--- a/arch/sh/drivers/pci/pci-st40.c
+++ b/arch/sh/drivers/pci/pci-st40.c
@@ -161,7 +161,7 @@ static char * pci_commands[16]={
"Memory Write-and-Invalidate"
};
-static irqreturn_t st40_pci_irq(int irq, void *dev_instance, struct pt_regs *regs)
+static irqreturn_t st40_pci_irq(int irq, void *dev_instance)
{
unsigned pci_int, pci_air, pci_cir, pci_aint;
static int count=0;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 15:38:49 +0000