7 files changed, 254 insertions, 4 deletions

diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index b0b59d4a33c..d8e122971c3 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -340,8 +340,27 @@ ENTRY(vbr_base)
 general_exception:
 	mov.l	1f, k2
 	mov.l	2f, k3
+#ifdef CONFIG_CPU_SUBTYPE_SHX3
+	mov.l	@k2, k2
+
+	! Is EXPEVT larger than 0x800?
+	mov	#0x8, k0
+	shll8	k0
+	cmp/hs	k0, k2
+	bf	0f
+
+	! then add 0x580 (k2 is 0xd80 or 0xda0)
+	mov	#0x58, k0
+	shll2	k0
+	shll2	k0
+	add	k0, k2
+0:
+	bra	handle_exception
+	 nop
+#else
 	bra	handle_exception
 	 mov.l	@k2, k2
+#endif
 	.align	2
 1:	.long	EXPEVT
 2:	.long	ret_from_exception
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index fab2eb07196..66c3f75647b 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -141,6 +141,14 @@ int __init detect_cpu_and_cache_system(void)
 			current_cpu_data.flags |= CPU_HAS_LLSC;
 		}
 		break;
+	case 0x4000:	/* 1st cut */
+	case 0x4001:	/* 2nd cut */
+		current_cpu_data.type = CPU_SHX3;
+		current_cpu_data.icache.ways = 4;
+		current_cpu_data.dcache.ways = 4;
+		current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+					  CPU_HAS_LLSC;
+		break;
 	case 0x8000:
 		current_cpu_data.type = CPU_ST40RA;
 		current_cpu_data.flags |= CPU_HAS_FPU;
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index ab7422f8f82..40062328648 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
 obj-$(CONFIG_CPU_SUBTYPE_SH73180)	+= setup-sh73180.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
+obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SUBTYPE_SH73180)	:= clock-sh73180.o
@@ -17,5 +18,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 
 obj-y	+= $(clock-y)
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
new file mode 100644
index 00000000000..c630b29e06a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -0,0 +1,135 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-shx3.c
+ *
+ * SH-X3 support for the clock framework
+ *
+ *  Copyright (C) 2006-2007  Renesas Technology Corp.
+ *  Copyright (C) 2006-2007  Renesas Solutions Corp.
+ *  Copyright (C) 2006-2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 4 ,6 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, 24, 32, 36, 48 };
+static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, 24, 32, 36, 48 };
+static int cfc_divisors[] = { 1, 1, 4, 6 };
+
+#define IFC_POS		28
+#define IFC_MSK		0x0003
+#define BFC_MSK		0x000f
+#define PFC_MSK		0x000f
+#define CFC_MSK		0x0003
+#define BFC_POS		16
+#define PFC_POS		0
+#define CFC_POS		20
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK];
+}
+
+static struct clk_ops shx3_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK);
+	clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops shx3_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK);
+	clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops shx3_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK);
+	clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops shx3_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *shx3_clk_ops[] = {
+	&shx3_master_clk_ops,
+	&shx3_module_clk_ops,
+	&shx3_bus_clk_ops,
+	&shx3_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(shx3_clk_ops))
+		*ops = shx3_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK);
+	clk->rate = clk->parent->rate / cfc_divisors[idx];
+}
+
+static struct clk_ops shx3_shyway_clk_ops = {
+	.recalc		= shyway_clk_recalc,
+};
+
+static struct clk shx3_shyway_clk = {
+	.name		= "shyway_clk",
+	.flags		= CLK_ALWAYS_ENABLED,
+	.ops		= &shx3_shyway_clk_ops,
+};
+
+/*
+ * Additional SHx3-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *shx3_onchip_clocks[] = {
+	&shx3_shyway_clk,
+};
+
+static int __init shx3_clk_init(void)
+{
+	struct clk *clk = clk_get(NULL, "master_clk");
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) {
+		struct clk *clkp = shx3_onchip_clocks[i];
+
+		clkp->parent = clk;
+		clk_register(clkp);
+		clk_enable(clkp);
+	}
+
+	/*
+	 * Now that we have the rest of the clocks registered, we need to
+	 * force the parent clock to propagate so that these clocks will
+	 * automatically figure out their rate. We cheat by handing the
+	 * parent clock its current rate and forcing child propagation.
+	 */
+	clk_set_rate(clk, clk_get_rate(clk));
+
+	clk_put(clk);
+
+	return 0;
+}
+arch_initcall(shx3_clk_init);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
new file mode 100644
index 00000000000..70683ea12b8
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -0,0 +1,85 @@
+/*
+ * SH-X3 Setup
+ *
+ *  Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <asm/sci.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffc30000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 40, 41, 43, 42 },
+	}, {
+		.mapbase	= 0xffc40000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 44, 45, 47, 46 },
+	}, {
+		.mapbase	= 0xffc50000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 48, 49, 51, 50 },
+	}, {
+		.mapbase	= 0xffc60000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 52, 53, 55, 54 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *shx3_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init shx3_devices_setup(void)
+{
+	return platform_add_devices(shx3_devices,
+				    ARRAY_SIZE(shx3_devices));
+}
+__initcall(shx3_devices_setup);
+
+static struct intc2_data intc2_irq_table[] = {
+	{ 16, 0, 0, 0, 1, 2 },		/* TMU0 */
+	{ 40, 4, 0, 0x20, 0, 3 },	/* SCIF0 ERI */
+	{ 41, 4, 0, 0x20, 1, 3 },	/* SCIF0 RXI */
+	{ 42, 4, 0, 0x20, 2, 3 },	/* SCIF0 BRI */
+	{ 43, 4, 0, 0x20, 3, 3 },	/* SCIF0 TXI */
+};
+
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0xfe410000,
+	.msk_base	= 0xfe410820,
+	.mskclr_base	= 0xfe410850,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-SHX3",
+	},
+};
+
+void __init init_IRQ_intc2(void)
+{
+	register_intc2_controller(&intc2_irq_desc);
+}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 765f83c1bca..de8e6e2f2c8 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -285,7 +285,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7770]	= "SH7770",	[CPU_SH7780]	= "SH7780",
 	[CPU_SH7781]	= "SH7781",	[CPU_SH7343]	= "SH7343",
 	[CPU_SH7785]	= "SH7785",	[CPU_SH7722]	= "SH7722",
-	[CPU_SH_NONE]	= "Unknown"
+	[CPU_SHX3]	= "SH-X3",	[CPU_SH_NONE]	= "Unknown"
 };
 
 const char *get_cpu_subtype(struct sh_cpuinfo *c)
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 2d997e2a5b6..097ebd49f1b 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -30,7 +30,7 @@
 
 static int tmu_timer_start(void)
 {
-	ctrl_outb(ctrl_inb(TMU_TSTR) | 0x3, TMU_TSTR);
+	ctrl_outb(ctrl_inb(TMU_012_TSTR) | 0x3, TMU_012_TSTR);
 	return 0;
 }
 
@@ -52,7 +52,7 @@ static void tmu0_timer_set_interval(unsigned long interval, unsigned int reload)
 
 static int tmu_timer_stop(void)
 {
-	ctrl_outb(ctrl_inb(TMU_TSTR) & ~0x3, TMU_TSTR);
+	ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~0x3, TMU_012_TSTR);
 	return 0;
 }
 
@@ -174,7 +174,8 @@ static int tmu_timer_init(void)
 
 #if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \
     !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
-    !defined(CONFIG_CPU_SUBTYPE_SH7785)
+    !defined(CONFIG_CPU_SUBTYPE_SH7785) && \
+    !defined(CONFIG_CPU_SUBTYPE_SHX3)
 	ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
 #endif