diff options
Diffstat (limited to 'arch/sh')
55 files changed, 928 insertions, 1758 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index f6a0c443616..6a461d4caef 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -45,6 +45,9 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_IOMAP bool +config GENERIC_TIME + def_bool n + config ARCH_MAY_HAVE_PC_FDC bool @@ -357,6 +360,7 @@ config CPU_HAS_SR_RB endmenu menu "Timer support" +depends on !GENERIC_TIME config SH_TMU bool "TMU timer support" diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c index 75f91aaae07..d146cdaa0b8 100644 --- a/arch/sh/boards/hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/hp6xx/hp6xx_apm.c @@ -14,7 +14,7 @@ #include <asm/io.h> #include <asm/apm.h> #include <asm/adc.h> -#include <asm/hp6xx/hp6xx.h> +#include <asm/hp6xx.h> #define SH7709_PGDR 0xa400012c @@ -83,7 +83,7 @@ static int hp6x0_apm_get_info(char *buf, char **start, off_t fpos, int length) return p - buf; } -static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev, struct pt_regs *regs) +static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev) { if (!apm_suspended) apm_queue_event(APM_USER_SUSPEND); @@ -96,7 +96,7 @@ static int __init hp6x0_apm_init(void) int ret; ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, - SA_INTERRUPT, MODNAME, 0); + IRQF_DISABLED, MODNAME, 0); if (unlikely(ret < 0)) { printk(KERN_ERR MODNAME ": IRQ %d request failed\n", HP680_BTN_IRQ); diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c index 83d32721206..d1947732fb3 100644 --- a/arch/sh/boards/hp6xx/pm.c +++ b/arch/sh/boards/hp6xx/pm.c @@ -12,7 +12,7 @@ #include <linux/time.h> #include <asm/io.h> #include <asm/hd64461.h> -#include <asm/hp6xx/hp6xx.h> +#include <asm/hp6xx.h> #include <asm/cpu/dac.h> #include <asm/pm.h> diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 2d3a5b4faf5..b5a96649ed2 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -13,7 +13,7 @@ #include <asm/hd64461.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/hp6xx/hp6xx.h> +#include <asm/hp6xx.h> #include <asm/cpu/dac.h> #define SCPCR 0xa4000116 diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c index 0b7bee1a9ca..e6252497816 100644 --- a/arch/sh/boards/landisk/landisk_pwb.c +++ b/arch/sh/boards/landisk/landisk_pwb.c @@ -135,7 +135,7 @@ static int swdrv_write(struct file *filp, const char *buff, size_t count, return count; } -static irqreturn_t sw_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t sw_interrupt(int irq, void *dev_id) { landisk_btn = (0x0ff & (~ctrl_inb(PA_STATUS))); disable_irq(IRQ_BUTTON); diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 01c10fa5c05..7c3d1d30415 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -69,7 +69,6 @@ static void __init pci_write_config(unsigned long busNo, static unsigned char m_irq_mask = 0xfb; static unsigned char s_irq_mask = 0xff; -volatile unsigned long irq_err_count; static void disable_mpc1211_irq(unsigned int irq) { @@ -118,7 +117,7 @@ static void mask_and_ack_mpc1211(unsigned int irq) if(irq < 8) { if(m_irq_mask & (1<<irq)){ if(!mpc1211_irq_real(irq)){ - irq_err_count++; + atomic_inc(&irq_err_count) printk("spurious 8259A interrupt: IRQ %x\n",irq); } } else { @@ -131,7 +130,7 @@ static void mask_and_ack_mpc1211(unsigned int irq) } else { if(s_irq_mask & (1<<(irq - 8))){ if(!mpc1211_irq_real(irq)){ - irq_err_count++; + atomic_inc(&irq_err_count); printk("spurious 8259A interrupt: IRQ %x\n",irq); } } else { diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c index 51f3f657421..bb9aa0d6285 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/io.c +++ b/arch/sh/boards/renesas/hs7751rvoip/io.c @@ -15,7 +15,7 @@ #include <linux/module.h> #include <linux/pci.h> #include <asm/io.h> -#include <asm/hs7751rvoip/hs7751rvoip.h> +#include <asm/hs7751rvoip.h> #include <asm/addrspace.h> extern void *area6_io8_base; /* Area 6 8bit I/O Base address */ diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c index c617b188258..943f93aa605 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/irq.c +++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c @@ -14,7 +14,7 @@ #include <linux/irq.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/hs7751rvoip/hs7751rvoip.h> +#include <asm/hs7751rvoip.h> static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7}; diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c index 0414c15c345..f7d0e304d89 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/setup.c +++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c @@ -10,22 +10,21 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/mm.h> -#include <linux/vmalloc.h> -#include <linux/hdreg.h> -#include <linux/ide.h> #include <linux/pm.h> +#include <asm/hs7751rvoip.h> #include <asm/io.h> -#include <asm/hs7751rvoip/hs7751rvoip.h> #include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/irq.h> -static void __init hs7751rvoip_init_irq(void) -{ +static struct ipr_data hs77501rvoip_ipr_map[] = { #if defined(CONFIG_HS7751RVOIP_CODEC) - make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + { DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, #endif +}; + +static void __init hs7751rvoip_init_irq(void) +{ + make_ipr_irq(hs77501rvoip_ipr_map, ARRAY_SIZE(hs77501rvoip_ipr_map)); init_hs7751rvoip_IRQ(); } diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c index db92d6e6ae9..311ccccba71 100644 --- a/arch/sh/boards/renesas/r7780rp/io.c +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -11,7 +11,7 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/types.h> -#include <asm/r7780rp/r7780rp.h> +#include <asm/r7780rp.h> #include <asm/addrspace.h> #include <asm/io.h> diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c index 2d960e9a314..aa15ec5bc69 100644 --- a/arch/sh/boards/renesas/r7780rp/irq.c +++ b/arch/sh/boards/renesas/r7780rp/irq.c @@ -1,18 +1,17 @@ /* - * linux/arch/sh/boards/renesas/r7780rp/irq.c - * - * Copyright (C) 2000 Kazumoto Kojima - * * Renesas Solutions Highlander R7780RP-1 Support. * - * Modified for R7780RP-1 by - * Atom Create Engineering Co., Ltd. 2002. + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include <linux/init.h> #include <linux/irq.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/r7780rp/r7780rp.h> +#include <linux/io.h> +#include <asm/r7780rp.h> #ifdef CONFIG_SH_R7780MP static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0}; @@ -20,71 +19,26 @@ static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0}; static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0}; #endif -static void enable_r7780rp_irq(unsigned int irq); -static void disable_r7780rp_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_r7780rp_irq disable_r7780rp_irq - -static void ack_r7780rp_irq(unsigned int irq); -static void end_r7780rp_irq(unsigned int irq); - -static unsigned int startup_r7780rp_irq(unsigned int irq) -{ - enable_r7780rp_irq(irq); - return 0; /* never anything pending */ -} - -static void disable_r7780rp_irq(unsigned int irq) -{ - unsigned short val; - unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); - - /* Set the priority in IPR to 0 */ - val = ctrl_inw(IRLCNTR1); - val &= mask; - ctrl_outw(val, IRLCNTR1); -} - static void enable_r7780rp_irq(unsigned int irq) { - unsigned short val; - unsigned short value = (0x0001 << mask_pos[irq]); - /* Set priority in IPR back to original value */ - val = ctrl_inw(IRLCNTR1); - val |= value; - ctrl_outw(val, IRLCNTR1); -} - -static void ack_r7780rp_irq(unsigned int irq) -{ - disable_r7780rp_irq(irq); + ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); } -static void end_r7780rp_irq(unsigned int irq) +static void disable_r7780rp_irq(unsigned int irq) { - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_r7780rp_irq(irq); + /* Set the priority in IPR to 0 */ + ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), + IRLCNTR1); } -static struct hw_interrupt_type r7780rp_irq_type = { - .typename = "R7780RP-IRQ", - .startup = startup_r7780rp_irq, - .shutdown = shutdown_r7780rp_irq, - .enable = enable_r7780rp_irq, - .disable = disable_r7780rp_irq, - .ack = ack_r7780rp_irq, - .end = end_r7780rp_irq, +static struct irq_chip r7780rp_irq_chip __read_mostly = { + .name = "R7780RP", + .mask = disable_r7780rp_irq, + .unmask = enable_r7780rp_irq, + .mask_ack = disable_r7780rp_irq, }; -static void make_r7780rp_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &r7780rp_irq_type; - disable_r7780rp_irq(irq); -} - /* * Initialize IRQ setting */ @@ -92,24 +46,10 @@ void __init init_r7780rp_IRQ(void) { int i; - /* IRL0=PCI Slot #A - * IRL1=PCI Slot #B - * IRL2=PCI Slot #C - * IRL3=PCI Slot #D - * IRL4=CF Card - * IRL5=CF Card Insert - * IRL6=M66596 - * IRL7=SD Card - * IRL8=Touch Panel - * IRL9=SCI - * IRL10=Serial - * IRL11=Extention #A - * IRL11=Extention #B - * IRL12=Debug LAN - * IRL13=Push Switch - * IRL14=ZiggBee IO - */ - - for (i=0; i<15; i++) - make_r7780rp_irq(i); + for (i = 0; i < 15; i++) { + disable_irq_nosync(i); + set_irq_chip_and_handler_name(i, &r7780rp_irq_chip, + handle_level_irq, "level"); + enable_r7780rp_irq(i); + } } diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index b941aa0aa34..c331caeb694 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <asm/machvec.h> -#include <asm/r7780rp/r7780rp.h> +#include <asm/r7780rp.h> #include <asm/clock.h> #include <asm/io.h> diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c index 135aa0b5e62..f2507a80497 100644 --- a/arch/sh/boards/renesas/rts7751r2d/io.c +++ b/arch/sh/boards/renesas/rts7751r2d/io.c @@ -11,8 +11,8 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/pci.h> -#include <asm/rts7751r2d/rts7751r2d.h> -#include <asm/io.h> +#include <linux/io.h> +#include <asm/rts7751r2d.h> #include <asm/addrspace.h> /* diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index c915e7a3693..cb0eb20d1b4 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -8,12 +8,10 @@ * Modified for RTS7751R2D by * Atom Create Engineering Co., Ltd. 2002. */ - #include <linux/init.h> #include <linux/irq.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/rts7751r2d/rts7751r2d.h> +#include <linux/io.h> +#include <asm/rts7751r2d.h> #if defined(CONFIG_RTS7751R2D_REV11) static int mask_pos[] = {11, 9, 8, 12, 10, 6, 5, 4, 7, 14, 13, 0, 0, 0, 0}; diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c index a7ce66c1e4f..509f548bdce 100644 --- a/arch/sh/boards/renesas/rts7751r2d/led.c +++ b/arch/sh/boards/renesas/rts7751r2d/led.c @@ -8,13 +8,9 @@ * * This file contains Renesas Technology Sales RTS7751R2D specific LED code. */ - -#include <asm/io.h> -#include <asm/rts7751r2d/rts7751r2d.h> - -#ifdef CONFIG_HEARTBEAT - +#include <linux/io.h> #include <linux/sched.h> +#include <asm/rts7751r2d.h> /* Cycle the LED's in the clasic Knightriger/Sun pattern */ void heartbeat_rts7751r2d(void) @@ -46,10 +42,3 @@ void heartbeat_rts7751r2d(void) else bit--; } -#endif /* CONFIG_HEARTBEAT */ - -void rts7751r2d_led(unsigned short value) -{ - ctrl_outw(value, PA_OUTPORT); -} - diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 20597a6e670..5c042d35ec9 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -12,9 +12,9 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/pm.h> -#include <asm/io.h> #include <asm/machvec.h> #include <asm/mach/rts7751r2d.h> +#include <asm/io.h> #include <asm/voyagergx.h> extern void heartbeat_rts7751r2d(void); diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c index e57e7afab8c..180810b1210 100644 --- a/arch/sh/boards/renesas/sh7710voipgw/setup.c +++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c @@ -13,6 +13,51 @@ #include <asm/io.h> #include <asm/irq.h> +static struct ipr_data sh7710voipgw_ipr_map[] = { + { TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY }, + { WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY }, + + /* SCIF0 */ + { SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, + { SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, + { SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, + { SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, + + /* DMAC-1 */ + { DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + + /* DMAC-2 */ + { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, + { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, + + /* IPSEC */ + { IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY }, + + /* EDMAC */ + { EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS, EDMAC0_PRIORITY }, + { EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS, EDMAC1_PRIORITY }, + { EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS, EDMAC2_PRIORITY }, + + /* SIOF0 */ + { SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + + /* SIOF1 */ + { SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY }, + { SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY }, + { SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY }, + { SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY }, + + /* SLIC IRQ's */ + { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY }, + { IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY }, +}; + /* * Initialize IRQ setting */ @@ -37,65 +82,7 @@ static void __init sh7710voipgw_init_irq(void) */ ctrl_outw(0x2aa, INTC_ICR1); - /* Now make IPR interrupts */ - make_ipr_irq(TIMER2_IRQ, TIMER2_IPR_ADDR, - TIMER2_IPR_POS, TIMER2_PRIORITY); - make_ipr_irq(WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY); - - /* SCIF0 */ - make_ipr_irq(SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, - SCIF0_PRIORITY); - make_ipr_irq(SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, - SCIF0_PRIORITY); - make_ipr_irq(SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, - SCIF0_PRIORITY); - make_ipr_irq(SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, - SCIF0_PRIORITY); - - /* DMAC-1 */ - make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - - /* DMAC-2 */ - make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - - /* IPSEC */ - make_ipr_irq(IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY); - - /* EDMAC */ - make_ipr_irq(EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS, - EDMAC0_PRIORITY); - make_ipr_irq(EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS, - EDMAC1_PRIORITY); - make_ipr_irq(EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS, - EDMAC2_PRIORITY); - - /* SIOF0 */ - make_ipr_irq(SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, - SIOF0_PRIORITY); - make_ipr_irq(SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, - SIOF0_PRIORITY); - make_ipr_irq(SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, - SIOF0_PRIORITY); - make_ipr_irq(SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, - SIOF0_PRIORITY); - - /* SIOF1 */ - make_ipr_irq(SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, - SIOF1_PRIORITY); - make_ipr_irq(SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, - SIOF1_PRIORITY); - make_ipr_irq(SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, - SIOF1_PRIORITY); - make_ipr_irq(SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, - SIOF1_PRIORITY); - - /* SLIC IRQ's */ - make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY); - make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY); + make_ipr_irq(sh7710voipgw_ipr_map, ARRAY_SIZE(sh7710voipgw_ipr_map)); } /* diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c index ad1034f98a2..1279d776d60 100644 --- a/arch/sh/boards/se/7300/irq.c +++ b/arch/sh/boards/se/7300/irq.c @@ -13,6 +13,17 @@ #include <asm/io.h> #include <asm/se7300.h> +static struct ipr_data se7300_ipr_map[] = { + /* PC_IRQ[0-3] -> IRQ0 (32) */ + { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ }, + /* A_IRQ[0-3] -> IRQ1 (33) */ + { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ }, + { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, +}; + /* * Initialize IRQ setting */ @@ -23,14 +34,7 @@ init_7300se_IRQ(void) ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */ ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */ - /* PC_IRQ[0-3] -> IRQ0 (32) */ - make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ); - /* A_IRQ[0-3] -> IRQ1 (33) */ - make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ); - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(se7300_ipr_map, ARRAY_SIZE(se7300_ipr_map)); ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ } diff --git a/arch/sh/boards/se/73180/irq.c b/arch/sh/boards/se/73180/irq.c index 2c62b8ea350..e7200c56bb4 100644 --- a/arch/sh/boards/se/73180/irq.c +++ b/arch/sh/boards/se/73180/irq.c @@ -87,13 +87,38 @@ shmse_irq_demux(int irq) return irq; } +static struct ipr_data se73180_siof0_ipr_map[] = { + { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, +}; +static struct ipr_data se73180_vpu_ipr_map[] = { + { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 }, +}; +static struct ipr_data se73180_other_ipr_map[] = { + { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, + { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY }, + + /* VIO interrupt */ + { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + + { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY }, +}; + /* * Initialize IRQ setting */ void __init init_73180se_IRQ(void) { - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + make_ipr_irq(se73180_siof0_ipr_map, ARRAY_SIZE(se73180_siof0_ipr_map)); ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ ctrl_outw(0x2000, 0xb07fffec); /* mrshpc irq enable */ @@ -101,27 +126,11 @@ init_73180se_IRQ(void) ctrl_outw(2 << ((7 - 5) * 2), INTC_ICR1); /* low-level irq */ make_intreq_irq(10); - make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8); + make_ipr_irq(se73180_vpu_ipr_map, ARRAY_SIZE(se73180_vpu_ipr_map)); ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY); - - /* VIO interrupt */ - make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(se73180_other_ipr_map, ARRAY_SIZE(se73180_other_ipr_map)); - make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY); ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ } diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c index 288b62f5941..360153ecc55 100644 --- a/arch/sh/boards/se/7343/irq.c +++ b/arch/sh/boards/se/7343/irq.c @@ -102,6 +102,51 @@ shmse_irq_demux(int irq) static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade", NULL, NULL}; +static struct ipr_data se7343_irq5_ipr_map[] = { + { IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY }, +}; +static struct ipr_data se7343_siof0_vpu_ipr_map[] = { + { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 }, +}; +static struct ipr_data se7343_other_ipr_map[] = { + { DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, + { DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, + + /* I2C block */ + { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + + { IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, + { IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, + { IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, + { IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, + + /* SIOF */ + { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + + /* SIU */ + { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY }, + + /* VIO interrupt */ + { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + + /*MFI interrupt*/ + + { MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY }, + + /* LCD controller */ + { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY }, +}; + /* * Initialize IRQ setting */ @@ -138,54 +183,17 @@ init_7343se_IRQ(void) /* Setup all external interrupts to be active low */ ctrl_outw(0xaaaa, INTC_ICR1); - make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY); + make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map)); + setup_irq(IRQ5_IRQ, &irq5); /* Set port control to use IRQ5 */ *(u16 *)0xA4050108 &= ~0xc; - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8); + make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map)); ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - make_ipr_irq(DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - make_ipr_irq(DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - - /* I2C block */ - make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - - make_ipr_irq(IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY); - make_ipr_irq(IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, - IIC1_PRIORITY); - make_ipr_irq(IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, - IIC1_PRIORITY); - make_ipr_irq(IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY); - - /* SIOF */ - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map)); - /* SIU */ - make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY); - - /* VIO interrupt */ - make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - - /*MFI interrupt*/ - - make_ipr_irq(MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY); - - /* LCD controller */ - make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY); ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ } diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c index cff6700bbaf..fcd7cd7fa05 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/se/770x/irq.c @@ -13,6 +13,48 @@ #include <asm/io.h> #include <asm/se.h> +static struct ipr_data se770x_ipr_map[] = { +#if defined(CONFIG_CPU_SUBTYPE_SH7705) + /* This is default value */ + { 0xf-0x2, BCR_ILCRA, 2, 0x2 }, + { 0xf-0xa, BCR_ILCRA, 1, 0xa }, + { 0xf-0x5, BCR_ILCRB, 0, 0x5 }, + { 0xf-0x8, BCR_ILCRC, 1, 0x8 }, + { 0xf-0xc, BCR_ILCRC, 0, 0xc }, + { 0xf-0xe, BCR_ILCRD, 3, 0xe }, + { 0xf-0x3, BCR_ILCRD, 1, 0x3 }, /* LAN */ + { 0xf-0xd, BCR_ILCRE, 2, 0xd }, + { 0xf-0x9, BCR_ILCRE, 1, 0x9 }, + { 0xf-0x1, BCR_ILCRE, 0, 0x1 }, + { 0xf-0xf, BCR_ILCRF, 3, 0xf }, + { 0xf-0xb, BCR_ILCRF, 1, 0xb }, + { 0xf-0x7, BCR_ILCRG, 3, 0x7 }, + { 0xf-0x6, BCR_ILCRG, 2, 0x6 }, + { 0xf-0x4, BCR_ILCRG, 1, 0x4 }, +#else + { 14, BCR_ILCRA, 2, 0x0f-14 }, + { 12, BCR_ILCRA, 1, 0x0f-12 }, + { 8, BCR_ILCRB, 1, 0x0f- 8 }, + { 6, BCR_ILCRC, 3, 0x0f- 6 }, + { 5, BCR_ILCRC, 2, 0x0f- 5 }, + { 4, BCR_ILCRC, 1, 0x0f- 4 }, + { 3, BCR_ILCRC, 0, 0x0f- 3 }, + { 1, BCR_ILCRD, 3, 0x0f- 1 }, + + { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */ + + { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */ + { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */ + { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */ + { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */ + + /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ + /* NOTE: #2 and #13 are not used on PC */ + { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */ + { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */ +#endif +}; + /* * Initialize IRQ setting */ @@ -38,42 +80,6 @@ void __init init_se_IRQ(void) ctrl_outw(0, BCR_ILCRE); ctrl_outw(0, BCR_ILCRF); ctrl_outw(0, BCR_ILCRG); - /* This is default value */ - make_ipr_irq(0xf-0x2, BCR_ILCRA, 2, 0x2); - make_ipr_irq(0xf-0xa, BCR_ILCRA, 1, 0xa); - make_ipr_irq(0xf-0x5, BCR_ILCRB, 0, 0x5); - make_ipr_irq(0xf-0x8, BCR_ILCRC, 1, 0x8); - make_ipr_irq(0xf-0xc, BCR_ILCRC, 0, 0xc); - make_ipr_irq(0xf-0xe, BCR_ILCRD, 3, 0xe); - make_ipr_irq(0xf-0x3, BCR_ILCRD, 1, 0x3); /* LAN */ - make_ipr_irq(0xf-0xd, BCR_ILCRE, 2, 0xd); - make_ipr_irq(0xf-0x9, BCR_ILCRE, 1, 0x9); - make_ipr_irq(0xf-0x1, BCR_ILCRE, 0, 0x1); - make_ipr_irq(0xf-0xf, BCR_ILCRF, 3, 0xf); - make_ipr_irq(0xf-0xb, BCR_ILCRF, 1, 0xb); - make_ipr_irq(0xf-0x7, BCR_ILCRG, 3, 0x7); - make_ipr_irq(0xf-0x6, BCR_ILCRG, 2, 0x6); - make_ipr_irq(0xf-0x4, BCR_ILCRG, 1, 0x4); -#else - make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14); - make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12); - make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8); - make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6); - make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5); - make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4); - make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3); - make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1); - - make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */ - - make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */ - make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */ - make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */ - make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */ - - /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ - /* NOTE: #2 and #13 are not used on PC */ - make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */ - make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */ #endif + make_ipr_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); } diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c index c607b0a4847..e4c63a48296 100644 --- a/arch/sh/boards/se/7751/irq.c +++ b/arch/sh/boards/se/7751/irq.c @@ -14,53 +14,50 @@ #include <asm/irq.h> #include <asm/se7751.h> -/* - * Initialize IRQ setting - */ -void __init init_7751se_IRQ(void) -{ - +static struct ipr_data se7751_ipr_map[] = { /* Leave old Solution Engine code in for reference. */ #if defined(CONFIG_SH_SOLUTION_ENGINE) - /* - * Super I/O (Just mimic PC): - * 1: keyboard - * 3: serial 0 - * 4: serial 1 - * 5: printer - * 6: floppy - * 8: rtc - * 12: mouse - * 14: ide0 - */ - make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14); - make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12); - make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8); - make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6); - make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5); - make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4); - make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3); - make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1); - - make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */ - - make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */ - make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */ - make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */ - make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */ - - /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ - /* NOTE: #2 and #13 are not used on PC */ - make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */ - make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */ - + /* + * Super I/O (Just mimic PC): + * 1: keyboard + * 3: serial 0 + * 4: serial 1 + * 5: printer + * 6: floppy + * 8: rtc + * 12: mouse + * 14: ide0 + */ + { 14, BCR_ILCRA, 2, 0x0f-14 }, + { 12, BCR_ILCRA, 1, 0x0f-12 }, + { 8, BCR_ILCRB, 1, 0x0f- 8 }, + { 6, BCR_ILCRC, 3, 0x0f- 6 }, + { 5, BCR_ILCRC, 2, 0x0f- 5 }, + { 4, BCR_ILCRC, 1, 0x0f- 4 }, + { 3, BCR_ILCRC, 0, 0x0f- 3 }, + { 1, BCR_ILCRD, 3, 0x0f- 1 }, + + { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */ + + { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */ + { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */ + { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */ + { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */ + + /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ + /* NOTE: #2 and #13 are not used on PC */ + { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */ + { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */ #elif defined(CONFIG_SH_7751_SOLUTION_ENGINE) - - make_ipr_irq(13, BCR_ILCRD, 3, 2); - - /* Add additional calls to make_ipr_irq() as drivers are added - * and tested. - */ + { 13, BCR_ILCRD, 3, 2 }, + /* Add additional entries here as drivers are added and tested. */ #endif +}; +/* + * Initialize IRQ setting + */ +void __init init_7751se_IRQ(void) +{ + make_ipr_irq(se7751_ipr_map, ARRAY_SIZE(se7751_ipr_map)); } diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index 137e2ba9243..5ad1e19771b 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -14,14 +14,17 @@ #include <asm/sh03/sh03.h> #include <asm/addrspace.h> +static struct ipr_data sh03_ipr_map[] = { + { IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY }, + { IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY }, + { IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY }, + { IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY }, +}; + static void __init init_sh03_IRQ(void) { ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - - make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); - make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); - make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); - make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); + make_ipr_irq(sh03_ipr_map, ARRAY_SIZE(sh03_ipr_map)); } extern void *cf_io_base; diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index 2f0c19706cf..a31a1d1e268 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -7,7 +7,7 @@ */ #include <linux/init.h> #include <asm/machvec.h> -#include <asm/shmin/shmin.h> +#include <asm/shmin.h> #include <asm/clock.h> #include <asm/irq.h> #include <asm/io.h> diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index f5e98c56b53..650fb364594 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -33,7 +33,7 @@ extern void pcibios_init(void); * EraseConfig handling functions */ -static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000; @@ -68,6 +68,13 @@ module_init(eraseconfig_init); * IRL3 = crypto */ +static struct ipr_data snapgear_ipr_map[] = { + make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); + make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); + make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); + make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); +}; + static void __init init_snapgear_IRQ(void) { /* enable individual interrupt mode for externals */ @@ -75,10 +82,7 @@ static void __init init_snapgear_IRQ(void) printk("Setup SnapGear IRQ/IPR ...\n"); - make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); - make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); - make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); - make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); + make_ipr_irq(snapgear_ipr_map, ARRAY_SIZE(snapgear_ipr_map)); } /* diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c index 52b66d8b8d2..a6046d93758 100644 --- a/arch/sh/boards/titan/setup.c +++ b/arch/sh/boards/titan/setup.c @@ -9,15 +9,19 @@ extern void __init pcibios_init_platform(void); +static struct ipr_data titan_ipr_map[] = { + { TITAN_IRQ_WAN, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY }, + { TITAN_IRQ_LAN, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY }, + { TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY }, + { TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY }, +}; + static void __init init_titan_irq(void) { /* enable individual interrupt mode for externals */ ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - make_ipr_irq( TITAN_IRQ_WAN, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); /* PCIRQ0 */ - make_ipr_irq( TITAN_IRQ_LAN, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); /* PCIRQ1 */ - make_ipr_irq( TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); /* PCIRQ2 */ - make_ipr_irq( TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); /* PCIRQ3 */ + make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map)); } struct sh_machine_vector mv_titan __initmv = { diff --git a/arch/sh/cchips/hd6446x/hd64461/setup.c b/arch/sh/cchips/hd6446x/hd64461/setup.c index 38f1e8171a3..4d49b5cbcc1 100644 --- a/arch/sh/cchips/hd6446x/hd64461/setup.c +++ b/arch/sh/cchips/hd6446x/hd64461/setup.c @@ -71,7 +71,7 @@ static struct hw_interrupt_type hd64461_irq_type = { .end = end_hd64461_irq, }; -static irqreturn_t hd64461_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t hd64461_interrupt(int irq, void *dev_id) { printk(KERN_INFO "HD64461: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", diff --git a/arch/sh/cchips/hd6446x/hd64465/gpio.c b/arch/sh/cchips/hd6446x/hd64465/gpio.c index 72320d02d69..43431855ec8 100644 --- a/arch/sh/cchips/hd6446x/hd64465/gpio.c +++ b/arch/sh/cchips/hd6446x/hd64465/gpio.c @@ -85,7 +85,7 @@ static struct { void *dev; } handlers[GPIO_NPORTS * 8]; -static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev, struct pt_regs *regs) +static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev) { unsigned short port, pin, isr, mask, portpin; diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c index 30573d3e196..d126e1f30de 100644 --- a/arch/sh/cchips/hd6446x/hd64465/setup.c +++ b/arch/sh/cchips/hd6446x/hd64465/setup.c @@ -84,7 +84,7 @@ static struct hw_interrupt_type hd64465_irq_type = { }; -static irqreturn_t hd64465_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t hd64465_interrupt(int irq, void *dev_id) { printk(KERN_INFO "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index 392c8b12ce3..f7ea700d05a 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -17,29 +17,18 @@ Copyright 2003 (c) Lineo uSolutions,Inc. */ -/* -------------------------------------------------------------------- */ - -#undef DEBUG - -#include <linux/sched.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/init.h> -#include <linux/irq.h> - -#include <asm/io.h> -#include <asm/irq.h> +#include <linux/io.h> #include <asm/voyagergx.h> +#include <asm/rts7751r2d.h> static void disable_voyagergx_irq(unsigned int irq) { unsigned long val; unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); val = inl(VOYAGER_INT_MASK); val &= ~mask; outl(val, VOYAGER_INT_MASK); @@ -50,7 +39,7 @@ static void enable_voyagergx_irq(unsigned int irq) unsigned long val; unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); val = inl(VOYAGER_INT_MASK); val |= mask; outl(val, VOYAGER_INT_MASK); @@ -88,8 +77,7 @@ static struct hw_interrupt_type voyagergx_irq_type = { .end = end_voyagergx_irq, }; -static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t voyagergx_interrupt(int irq, void *dev_id) { printk(KERN_INFO "VoyagerGX: spurious interrupt, status: 0x%x\n", @@ -138,7 +126,7 @@ int voyagergx_irq_demux(int irq) } else { printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val); } - pr_debug("voyagergx_irq_demux %d \n", i); + pr_debug("voyagergx_irq_demux %ld\n", i); #else for (bit = 1, i = 0 ; i < VOYAGER_IRQ_NUM ; bit <<= 1, i++) if (val & bit) @@ -186,4 +174,3 @@ void __init setup_voyagergx_irq(void) setup_irq(IRQ_VOYAGER, &irq0); } - diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/r7780rp_defconfig index 2470364948e..34e2046c321 100644 --- a/arch/sh/configs/r7780rp_defconfig +++ b/arch/sh/configs/r7780rp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:32:47 2006 +# Linux kernel version: 2.6.19-rc3 +# Tue Oct 31 12:32:06 2006 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -10,6 +10,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -178,7 +179,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 -CONFIG_32BIT=y +# CONFIG_32BIT is not set CONFIG_VSYSCALL=y CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -229,9 +230,7 @@ CONFIG_SH_PCLK_FREQ=32000000 # # DMA support # -CONFIG_SH_DMA=y -CONFIG_NR_ONCHIP_DMA_CHANNELS=6 -# CONFIG_NR_DMA_CHANNELS_BOOL is not set +# CONFIG_SH_DMA is not set # # Companion Chips @@ -259,7 +258,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="mem=128M console=ttySC0,115200 root=/dev/hda1" +CONFIG_CMDLINE="mem=128M console=ttySC0,115200 root=/dev/sda1" # # Bus options @@ -336,6 +335,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -441,76 +441,28 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_ATA_OVER_ETH is not set # +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -CONFIG_BLK_DEV_IDE_SATA=y -CONFIG_BLK_DEV_IDEDISK=m -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=m -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=m -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_AEC62XX=m -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -CONFIG_BLK_DEV_PDC202XX_NEW=m -# CONFIG_BLK_DEV_SVWKS is not set -CONFIG_BLK_DEV_SIIMAGE=m -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m +CONFIG_SCSI=y # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set @@ -561,6 +513,7 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -570,7 +523,55 @@ CONFIG_CHR_DEV_SG=m # # Serial ATA (prod) and Parallel ATA (experimental) drivers # -# CONFIG_ATA is not set +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # # Multi-device support (RAID and LVM) @@ -840,7 +841,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -856,6 +856,7 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -868,14 +869,9 @@ CONFIG_HWMON=y # CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -959,7 +955,29 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # Real Time Clock # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support @@ -984,6 +1002,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -991,6 +1010,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set @@ -1027,7 +1047,8 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y @@ -1159,6 +1180,7 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1178,9 +1200,9 @@ CONFIG_FORCED_INLINING=y # CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -1191,7 +1213,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig index 5e817546113..41049cf14b7 100644 --- a/arch/sh/configs/titan_defconfig +++ b/arch/sh/configs/titan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 12:59:14 2006 +# Linux kernel version: 2.6.19-rc3 +# Mon Oct 30 18:04:49 2006 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -10,6 +10,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -23,7 +24,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set @@ -236,8 +237,8 @@ CONFIG_HZ_250=y CONFIG_HZ=250 # CONFIG_KEXEC is not set # CONFIG_SMP is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # @@ -247,7 +248,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x009e0000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf" +CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw" # # Bus options @@ -334,6 +335,7 @@ CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set @@ -355,9 +357,10 @@ CONFIG_INET6_XFRM_TUNNEL=y CONFIG_INET6_TUNNEL=y CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=y -# CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -714,6 +717,12 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_ATA_OVER_ETH=m # +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # # CONFIG_IDE is not set @@ -778,9 +787,9 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -1095,7 +1104,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -1124,14 +1132,9 @@ CONFIG_HWMON=y # CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -1177,9 +1180,9 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1235,7 +1238,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_TRANCEVIBRATOR is not set # # USB Imaging devices @@ -1246,11 +1248,20 @@ CONFIG_USB_STORAGE=y # # USB Network Adapters # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m CONFIG_USB_MON=y # @@ -1285,6 +1296,7 @@ CONFIG_USB_SERIAL_ARK3116=m # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m @@ -1316,6 +1328,7 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -1357,7 +1370,26 @@ CONFIG_USB_SERIAL_PL2303=m # # Real Time Clock # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=m +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=m +CONFIG_RTC_INTF_PROC=m +CONFIG_RTC_INTF_DEV=m +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_SH=m +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support @@ -1380,8 +1412,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4DEV_FS=m +# CONFIG_EXT4DEV_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -1393,9 +1429,10 @@ CONFIG_XFS_FS=m # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_ROMFS_FS=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set @@ -1480,7 +1517,12 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_WEAK_PW_HASH=y +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1583,9 +1625,10 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_DEBUG_LIST is not set # CONFIG_FRAME_POINTER is not set # CONFIG_FORCED_INLINING is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y +# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1605,7 +1648,7 @@ CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m @@ -1615,7 +1658,7 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c index 9cb07092418..0caf11bb7e2 100644 --- a/arch/sh/drivers/dma/dma-g2.c +++ b/arch/sh/drivers/dma/dma-g2.c @@ -51,7 +51,7 @@ static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa0 ((g2_dma->channel[i].size - \ g2_dma->status[i].size) & 0x0fffffff) -static irqreturn_t g2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t g2_dma_interrupt(int irq, void *dev_id) { int i; diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index c1b6bc23c10..838fad566ea 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -21,7 +21,7 @@ static unsigned int xfer_complete; static int count; -static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id) { if (get_dma_residue(PVR2_CASCADE_CHAN)) { printk(KERN_WARNING "DMA: SH DMAC did not complete transfer " diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index cbbe8bce3d6..66078601335 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -19,23 +19,34 @@ #include <asm/io.h> #include "dma-sh.h" -static inline unsigned int get_dmte_irq(unsigned int chan) -{ - unsigned int irq = 0; + +#ifdef CONFIG_CPU_SH4 +static struct ipr_data dmae_ipr_map[] = { + { DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, +}; +#endif +static struct ipr_data dmte_ipr_map[] = { /* * Normally we could just do DMTE0_IRQ + chan outright, though in the * case of the 7751R, the DMTE IRQs for channels > 4 start right above * the SCIF */ - if (chan < 4) { - irq = DMTE0_IRQ + chan; - } else { -#ifdef DMTE4_IRQ - irq = DMTE4_IRQ + chan - 4; -#endif - } + { DMTE0_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE0_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE0_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE0_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE4_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE4_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE4_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE4_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, +}; +static inline unsigned int get_dmte_irq(unsigned int chan) +{ + unsigned int irq = 0; + if (chan < ARRAY_SIZE(dmte_ipr_map)) + irq = dmte_ipr_map[chan].irq; return irq; } @@ -60,9 +71,9 @@ static inline unsigned int calc_xmit_shift(struct dma_channel *chan) * Besides that it needs to waken any waiting process, which should handle * setting up the next transfer. */ -static irqreturn_t dma_tei(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t dma_tei(int irq, void *dev_id) { - struct dma_channel *chan = (struct dma_channel *)dev_id; + struct dma_channel *chan = dev_id; u32 chcr; chcr = ctrl_inl(CHCR[chan->chan]); @@ -228,7 +239,7 @@ static inline int dmaor_reset(void) } #if defined(CONFIG_CPU_SH4) -static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t dma_err(int irq, void *dummy) { dmaor_reset(); disable_irq(irq); @@ -258,17 +269,16 @@ static int __init sh_dmac_init(void) int i; #ifdef CONFIG_CPU_SH4 - make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + make_ipr_irq(dmae_ipr_map, ARRAY_SIZE(dmae_ipr_map)); i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0); if (unlikely(i < 0)) return i; #endif - for (i = 0; i < info->nr_channels; i++) { - int irq = get_dmte_irq(i); - - make_ipr_irq(irq, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - } + i = info->nr_channels; + if (i > ARRAY_SIZE(dmte_ipr_map)) + i = ARRAY_SIZE(dmte_ipr_map); + make_ipr_irq(dmte_ipr_map, i); /* * Initialize DMAOR, and clean up any error flags that may have diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 6e3ba9c65b4..eeea1577e11 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pci.h> -#include <asm/r7780rp/r7780rp.h> +#include <asm/r7780rp.h> #include <asm/io.h> #include "pci-sh4.h" diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index b68824c8b81..4a518d94804 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -10,28 +10,24 @@ * * PCI initialization for the Renesas SH7751R RTS7751R2D board */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> -#include <linux/delay.h> #include <linux/pci.h> -#include <linux/module.h> -#include <asm/rts7751r2d/rts7751r2d.h> -#include <asm/io.h> +#include <linux/io.h> +#include <asm/rts7751r2d.h> #include "pci-sh4.h" +static u8 rts7751r2d_irq_tab[] __initdata = { + IRQ_PCISLOT1, + IRQ_PCISLOT2, + IRQ_PCMCIA, + IRQ_PCIETH, +}; + int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { - switch (slot) { - case 0: return IRQ_PCISLOT1; /* PCI Extend slot #1 */ - case 1: return IRQ_PCISLOT2; /* PCI Extend slot #2 */ - case 2: return IRQ_PCMCIA; /* PCI Cardbus Bridge */ - case 3: return IRQ_PCIETH; /* Realtek Ethernet controller */ - default: - printk("PCI: Bad IRQ mapping request for slot %d\n", slot); - return -1; - } + return rts7751r2d_irq_tab[slot]; } static struct resource sh7751_io_resource = { diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index dbe83788498..85e1ee2e2e7 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -155,7 +155,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) */ pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO, (64 << 10), - SH4_PCI_IO_BASE + PCIBIOS_MIN_IO); + SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO); /* * XXX: For now, leave this board-specific. In the event we have other @@ -163,7 +163,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) */ #ifdef CONFIG_SH_BIGSUR bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10), - SH4_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); + SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); #endif /* Make sure the MSB's of IO window are set to access PCI space diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c index 4ab5ea6b35f..efecb3d5995 100644 --- a/arch/sh/drivers/pci/pci-st40.c +++ b/arch/sh/drivers/pci/pci-st40.c @@ -161,7 +161,7 @@ static char * pci_commands[16]={ "Memory Write-and-Invalidate" }; -static irqreturn_t st40_pci_irq(int irq, void *dev_instance, struct pt_regs *regs) +static irqreturn_t st40_pci_irq(int irq, void *dev_instance) { unsigned pci_int, pci_air, pci_cir, pci_aint; static int count=0; diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c index e30e4b7aa70..74ca576a7ce 100644 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -10,93 +10,31 @@ * These are the "new Hitachi style" interrupts, as present on the * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780. */ - #include <linux/kernel.h> -#include <linux/init.h> #include <linux/irq.h> +#include <linux/io.h> #include <asm/system.h> -#include <asm/io.h> -#include <asm/machvec.h> - -struct intc2_data { - unsigned char msk_offset; - unsigned char msk_shift; - - int (*clear_irq) (int); -}; - -static struct intc2_data intc2_data[NR_INTC2_IRQS]; - -static void enable_intc2_irq(unsigned int irq); -static void disable_intc2_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_intc2_irq disable_intc2_irq - -static void mask_and_ack_intc2(unsigned int); -static void end_intc2_irq(unsigned int irq); - -static unsigned int startup_intc2_irq(unsigned int irq) -{ - enable_intc2_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type intc2_irq_type = { - .typename = "INTC2-IRQ", - .startup = startup_intc2_irq, - .shutdown = shutdown_intc2_irq, - .enable = enable_intc2_irq, - .disable = disable_intc2_irq, - .ack = mask_and_ack_intc2, - .end = end_intc2_irq -}; static void disable_intc2_irq(unsigned int irq) { - int irq_offset = irq - INTC2_FIRST_IRQ; - int msk_shift, msk_offset; - - /* Sanity check */ - if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) - return; - - msk_shift = intc2_data[irq_offset].msk_shift; - msk_offset = intc2_data[irq_offset].msk_offset; - - ctrl_outl(1 << msk_shift, - INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset); + struct intc2_data *p = get_irq_chip_data(irq); + ctrl_outl(1 << p->msk_shift, + INTC2_BASE + INTC2_INTMSK_OFFSET + p->msk_offset); } static void enable_intc2_irq(unsigned int irq) { - int irq_offset = irq - INTC2_FIRST_IRQ; - int msk_shift, msk_offset; - - /* Sanity check */ - if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) - return; - - msk_shift = intc2_data[irq_offset].msk_shift; - msk_offset = intc2_data[irq_offset].msk_offset; - - ctrl_outl(1 << msk_shift, - INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset); + struct intc2_data *p = get_irq_chip_data(irq); + ctrl_outl(1 << p->msk_shift, + INTC2_BASE + INTC2_INTMSKCLR_OFFSET + p->msk_offset); } -static void mask_and_ack_intc2(unsigned int irq) -{ - disable_intc2_irq(irq); -} - -static void end_intc2_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_intc2_irq(irq); - - if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq)) - intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq); -} +static struct irq_chip intc2_irq_chip = { + .name = "INTC2", + .mask = disable_intc2_irq, + .unmask = enable_intc2_irq, + .mask_ack = disable_intc2_irq, +}; /* * Setup an INTC2 style interrupt. @@ -106,179 +44,36 @@ static void end_intc2_irq(unsigned int irq) * PIO1 which is INTPRI00[19,16] and INTMSK00[13] * would be: ^ ^ ^ ^ * | | | | - * make_intc2_irq(84, 0, 16, 0, 13); + * { 84, 0, 16, 0, 13 }, + * + * in the intc2_data table. */ -void make_intc2_irq(unsigned int irq, - unsigned int ipr_offset, unsigned int ipr_shift, - unsigned int msk_offset, unsigned int msk_shift, - unsigned int priority) +void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs) { - int irq_offset = irq - INTC2_FIRST_IRQ; - unsigned int flags; - unsigned long ipr; - - if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) - return; - - disable_irq_nosync(irq); - - /* Fill the data we need */ - intc2_data[irq_offset].msk_offset = msk_offset; - intc2_data[irq_offset].msk_shift = msk_shift; - intc2_data[irq_offset].clear_irq = NULL; - - /* Set the priority level */ - local_irq_save(flags); - - ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset); - ipr &= ~(0xf << ipr_shift); - ipr |= priority << ipr_shift; - ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset); - - local_irq_restore(flags); + int i; - irq_desc[irq].chip = &intc2_irq_type; + for (i = 0; i < nr_irqs; i++) { + unsigned long ipr, flags; + struct intc2_data *p = table + i; - disable_intc2_irq(irq); -} + disable_irq_nosync(p->irq); -static struct intc2_init { - unsigned short irq; - unsigned char ipr_offset, ipr_shift; - unsigned char msk_offset, msk_shift; - unsigned char priority; -} intc2_init_data[] __initdata = { -#if defined(CONFIG_CPU_SUBTYPE_ST40) - {64, 0, 0, 0, 0, 13}, /* PCI serr */ - {65, 0, 4, 0, 1, 13}, /* PCI err */ - {66, 0, 4, 0, 2, 13}, /* PCI ad */ - {67, 0, 4, 0, 3, 13}, /* PCI pwd down */ - {72, 0, 8, 0, 5, 13}, /* DMAC INT0 */ - {73, 0, 8, 0, 6, 13}, /* DMAC INT1 */ - {74, 0, 8, 0, 7, 13}, /* DMAC INT2 */ - {75, 0, 8, 0, 8, 13}, /* DMAC INT3 */ - {76, 0, 8, 0, 9, 13}, /* DMAC INT4 */ - {78, 0, 8, 0, 11, 13}, /* DMAC ERR */ - {80, 0, 12, 0, 12, 13}, /* PIO0 */ - {84, 0, 16, 0, 13, 13}, /* PIO1 */ - {88, 0, 20, 0, 14, 13}, /* PIO2 */ - {112, 4, 0, 4, 0, 13}, /* Mailbox */ - #ifdef CONFIG_CPU_SUBTYPE_ST40GX1 - {116, 4, 4, 4, 4, 13}, /* SSC0 */ - {120, 4, 8, 4, 8, 13}, /* IR Blaster */ - {124, 4, 12, 4, 12, 13}, /* USB host */ - {128, 4, 16, 4, 16, 13}, /* Video processor BLITTER */ - {132, 4, 20, 4, 20, 13}, /* UART0 */ - {134, 4, 20, 4, 22, 13}, /* UART2 */ - {136, 4, 24, 4, 24, 13}, /* IO_PIO0 */ - {140, 4, 28, 4, 28, 13}, /* EMPI */ - {144, 8, 0, 8, 0, 13}, /* MAFE */ - {148, 8, 4, 8, 4, 13}, /* PWM */ - {152, 8, 8, 8, 8, 13}, /* SSC1 */ - {156, 8, 12, 8, 12, 13}, /* IO_PIO1 */ - {160, 8, 16, 8, 16, 13}, /* USB target */ - {164, 8, 20, 8, 20, 13}, /* UART1 */ - {168, 8, 24, 8, 24, 13}, /* Teletext */ - {172, 8, 28, 8, 28, 13}, /* VideoSync VTG */ - {173, 8, 28, 8, 29, 13}, /* VideoSync DVP0 */ - {174, 8, 28, 8, 30, 13}, /* VideoSync DVP1 */ -#endif -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) -/* - * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0 - */ - /* INTPRIO0 | INTMSK0 */ - {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ - {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ - {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ - {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ - /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */ - /* INTPRIO4 | INTMSK0 */ - {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ - {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ - {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ - {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */ - {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */ - {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ - {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ - {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ - /* INTPRIO8 | INTMSK0 */ - {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ - {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ - {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ - {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ - {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ - {65, 8, 24, 0, 16, 3}, /* LCDC */ - /* 66, 67 unused */ - {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ - {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ - {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ - /* 71 unused */ - {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ - {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ - {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ - {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */ - {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */ - {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ - {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ - {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ - /* | INTMSK4 */ - {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ - {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ - {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ - {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ - {84, 8, 0, 4, 19, 3}, /* HSPII */ - /* INTPRIOC | INTMSK4 */ - /* 85-87 unused/reserved */ - {88, 12, 20, 4, 18, 3}, /* MMCI0 */ - {89, 12, 20, 4, 17, 3}, /* MMCI1 */ - {90, 12, 20, 4, 16, 3}, /* MMCI2 */ - {91, 12, 20, 4, 15, 3}, /* MMCI3 */ - {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/ - /* 93-107 reserved/undocumented */ - {108,12, 4, 4, 1, 3}, /* ADC */ - {109,12, 0, 4, 0, 3}, /* CMTI */ - /* 110-111 reserved/unused */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) - { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2}, - { 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + /* Set the priority level */ + local_irq_save(flags); - { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + + p->ipr_offset); + ipr &= ~(0xf << p->ipr_shift); + ipr |= p->priority << p->ipr_shift; + ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + + p->ipr_offset); - { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY }, - { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY }, - { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY }, - { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY }, - { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY }, -#endif -}; + local_irq_restore(flags); -void __init init_IRQ_intc2(void) -{ - int i; + set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip, + handle_level_irq, "level"); + set_irq_chip_data(p->irq, p); - for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) { - struct intc2_init *p = intc2_init_data + i; - make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift, - p-> msk_offset, p->msk_shift, p->priority); + enable_intc2_irq(p->irq); } } - -/* Adds a termination callback to the interrupt */ -void intc2_add_clear_irq(int irq, int (*fn)(int)) -{ - if (unlikely(irq < INTC2_FIRST_IRQ)) - return; - - intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn; -} - diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index f785822cd5d..a0089563cbf 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -1,11 +1,10 @@ /* - * arch/sh/kernel/cpu/irq/ipr.c + * Interrupt handling for IPR-based IRQ. * * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi * Copyright (C) 2000 Kazumoto Kojima - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * - * Interrupt handling for IPR-based IRQ. + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * Copyright (C) 2006 Paul Mundt * * Supported system: * On-chip supporting modules (TMU, RTC, etc.). @@ -13,151 +12,92 @@ * Hitachi SolutionEngine external I/O: * MS7709SE01, MS7709ASE01, and MS7750SE01 * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include <linux/init.h> #include <linux/irq.h> #include <linux/module.h> - #include <asm/system.h> #include <asm/io.h> #include <asm/machvec.h> -struct ipr_data { - unsigned int addr; /* Address of Interrupt Priority Register */ - int shift; /* Shifts of the 16-bit data */ - int priority; /* The priority */ -}; -static struct ipr_data ipr_data[NR_IRQS]; - -static void enable_ipr_irq(unsigned int irq); -static void disable_ipr_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_ipr_irq disable_ipr_irq - -static void mask_and_ack_ipr(unsigned int); -static void end_ipr_irq(unsigned int irq); - -static unsigned int startup_ipr_irq(unsigned int irq) -{ - enable_ipr_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type ipr_irq_type = { - .typename = "IPR-IRQ", - .startup = startup_ipr_irq, - .shutdown = shutdown_ipr_irq, - .enable = enable_ipr_irq, - .disable = disable_ipr_irq, - .ack = mask_and_ack_ipr, - .end = end_ipr_irq -}; static void disable_ipr_irq(unsigned int irq) { - unsigned long val; - unsigned int addr = ipr_data[irq].addr; - unsigned short mask = 0xffff ^ (0x0f << ipr_data[irq].shift); - + struct ipr_data *p = get_irq_chip_data(irq); + int shift = p->shift*4; /* Set the priority in IPR to 0 */ - val = ctrl_inw(addr); - val &= mask; - ctrl_outw(val, addr); + ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << shift)), p->addr); } static void enable_ipr_irq(unsigned int irq) { - unsigned long val; - unsigned int addr = ipr_data[irq].addr; - int priority = ipr_data[irq].priority; - unsigned short value = (priority << ipr_data[irq].shift); - + struct ipr_data *p = get_irq_chip_data(irq); + int shift = p->shift*4; /* Set priority in IPR back to original value */ - val = ctrl_inw(addr); - val |= value; - ctrl_outw(val, addr); + ctrl_outw(ctrl_inw(p->addr) | (p->priority << shift), p->addr); } -static void mask_and_ack_ipr(unsigned int irq) -{ - disable_ipr_irq(irq); - -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) - /* This is needed when we use edge triggered setting */ - /* XXX: Is it really needed? */ - if (IRQ0_IRQ <= irq && irq <= IRQ5_IRQ) { - /* Clear external interrupt request */ - int a = ctrl_inb(INTC_IRR0); - a &= ~(1 << (irq - IRQ0_IRQ)); - ctrl_outb(a, INTC_IRR0); - } -#endif -} +static struct irq_chip ipr_irq_chip = { + .name = "IPR", + .mask = disable_ipr_irq, + .unmask = enable_ipr_irq, + .mask_ack = disable_ipr_irq, +}; -static void end_ipr_irq(unsigned int irq) +void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) { - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + int i; + + for (i = 0; i < nr_irqs; i++) { + unsigned int irq = table[i].irq; + disable_irq_nosync(irq); + set_irq_chip_and_handler_name(irq, &ipr_irq_chip, + handle_level_irq, "level"); + set_irq_chip_data(irq, &table[i]); enable_ipr_irq(irq); + } } +EXPORT_SYMBOL(make_ipr_irq); -void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority) -{ - disable_irq_nosync(irq); - ipr_data[irq].addr = addr; - ipr_data[irq].shift = pos*4; /* POSition (0-3) x 4 means shift */ - ipr_data[irq].priority = priority; - - irq_desc[irq].chip = &ipr_irq_type; - disable_ipr_irq(irq); -} - -void __init init_IRQ(void) -{ +static struct ipr_data sys_ipr_map[] = { #ifndef CONFIG_CPU_SUBTYPE_SH7780 - make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY); - make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY); + { TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY }, + { TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY }, #ifdef RTC_IRQ - make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY); + { RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY }, #endif - #ifdef SCI_ERI_IRQ - make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); - make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); - make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); + { SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, + { SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, + { SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, #endif - #ifdef SCIF1_ERI_IRQ - make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); + { SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, + { SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, + { SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, + { SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, #endif - #if defined(CONFIG_CPU_SUBTYPE_SH7300) - make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + { SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, + { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, #endif - #ifdef SCIF_ERI_IRQ - make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); + { SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, + { SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, + { SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, + { SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, #endif - #ifdef IRDA_ERI_IRQ - make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); + { IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, + { IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, + { IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, + { IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, #endif - #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) @@ -171,14 +111,19 @@ void __init init_IRQ(void) * You should set corresponding bits of PFC to "00" * to enable these interrupts. */ - make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY); - make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY); - make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY); - make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY); - make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY); - make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY); + { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY }, + { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY }, + { IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY }, + { IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY }, + { IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY }, + { IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY }, #endif #endif +}; + +void __init init_IRQ(void) +{ + make_ipr_irq(sys_ipr_map, ARRAY_SIZE(sys_ipr_map)); #ifdef CONFIG_CPU_HAS_PINT_IRQ init_IRQ_pint(); @@ -200,5 +145,3 @@ int ipr_irq_demux(int irq) return irq; } #endif - -EXPORT_SYMBOL(make_ipr_irq); diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c index 17f47b373d6..f60007783a2 100644 --- a/arch/sh/kernel/cpu/irq/pint.c +++ b/arch/sh/kernel/cpu/irq/pint.c @@ -84,12 +84,16 @@ void make_pint_irq(unsigned int irq) disable_pint_irq(irq); } +static struct ipr_data pint_ipr_map[] = { + { PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY }, + { PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY }, +}; + void __init init_IRQ_pint(void) { int i; - make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY); - make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY); + make_ipr_irq(pint_ipr_map, ARRAY_SIZE(pint_ipr_map)); enable_irq(PINT0_IRQ); enable_irq(PINT8_IRQ); diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index 44daf44833f..ba3082d640b 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -4,7 +4,7 @@ * The SH-3 exception vector table. * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -49,198 +49,10 @@ ENTRY(nmi_slot) #endif ENTRY(user_break_point_trap) .long break_point_trap /* 1E0 */ -ENTRY(interrupt_table) - ! external hardware - .long do_IRQ ! 0000 /* 200 */ - .long do_IRQ ! 0001 - .long do_IRQ ! 0010 - .long do_IRQ ! 0011 - .long do_IRQ ! 0100 - .long do_IRQ ! 0101 - .long do_IRQ ! 0110 - .long do_IRQ ! 0111 - .long do_IRQ ! 1000 /* 300 */ - .long do_IRQ ! 1001 - .long do_IRQ ! 1010 - .long do_IRQ ! 1011 - .long do_IRQ ! 1100 - .long do_IRQ ! 1101 - .long do_IRQ ! 1110 - .long exception_error - ! Internal hardware - .long do_IRQ ! TMU0 tuni0 /* 400 */ - .long do_IRQ ! TMU1 tuni1 - .long do_IRQ ! TMU2 tuni2 - .long do_IRQ ! ticpi2 - .long do_IRQ ! RTC ati - .long do_IRQ ! pri - .long do_IRQ ! cui - .long do_IRQ ! SCI eri - .long do_IRQ ! rxi /* 500 */ - .long do_IRQ ! txi - .long do_IRQ ! tei - .long do_IRQ ! WDT iti /* 560 */ - .long do_IRQ ! REF rcmi - .long do_IRQ ! rovi - .long do_IRQ - .long do_IRQ /* 5E0 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || \ - defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) - .long do_IRQ ! 32 IRQ irq0 /* 600 */ - .long do_IRQ ! 33 irq1 - .long do_IRQ ! 34 irq2 - .long do_IRQ ! 35 irq3 - .long do_IRQ ! 36 irq4 - .long do_IRQ ! 37 irq5 - .long do_IRQ ! 38 - .long do_IRQ ! 39 - .long do_IRQ ! 40 PINT pint0-7 /* 700 */ - .long do_IRQ ! 41 pint8-15 - .long do_IRQ ! 42 - .long do_IRQ ! 43 - .long do_IRQ ! 44 - .long do_IRQ ! 45 - .long do_IRQ ! 46 - .long do_IRQ ! 47 - .long do_IRQ ! 48 DMAC dei0 /* 800 */ - .long do_IRQ ! 49 dei1 - .long do_IRQ ! 50 dei2 - .long do_IRQ ! 51 dei3 - .long do_IRQ ! 52 IrDA eri1 - .long do_IRQ ! 53 rxi1 - .long do_IRQ ! 54 bri1 - .long do_IRQ ! 55 txi1 - .long do_IRQ ! 56 SCIF eri2 - .long do_IRQ ! 57 rxi2 - .long do_IRQ ! 58 bri2 - .long do_IRQ ! 59 txi2 - .long do_IRQ ! 60 ADC adi /* 980 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7705) - .long exception_none ! 61 /* 9A0 */ - .long exception_none ! 62 - .long exception_none ! 63 - .long exception_none ! 64 /* A00 */ - .long do_IRQ ! 65 USB usi0 - .long do_IRQ ! 66 usi1 - .long exception_none ! 67 - .long exception_none ! 68 - .long exception_none ! 69 - .long exception_none ! 70 - .long exception_none ! 71 - .long exception_none ! 72 /* B00 */ - .long exception_none ! 73 - .long exception_none ! 74 - .long exception_none ! 75 - .long exception_none ! 76 - .long exception_none ! 77 - .long exception_none ! 78 - .long exception_none ! 79 - .long do_IRQ ! 80 TPU0 tpi0 /* C00 */ - .long do_IRQ ! 81 TPU1 tpi1 - .long exception_none ! 82 - .long exception_none ! 83 - .long do_IRQ ! 84 TPU2 tpi2 - .long do_IRQ ! 85 TPU3 tpi3 /* CA0 */ -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7300) - .long do_IRQ ! 61 LCDC lcdi /* 9A0 */ - .long do_IRQ ! 62 PCC pcc0i - .long do_IRQ ! 63 pcc1i /* 9E0 */ -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7710) - .long exception_none ! 61 /* 9A0 */ - .long exception_none ! 62 - .long exception_none ! 63 - .long exception_none ! 64 /* A00 */ - .long exception_none ! 65 - .long exception_none ! 66 - .long exception_none ! 67 - .long exception_none ! 68 - .long exception_none ! 69 - .long exception_none ! 70 - .long exception_none ! 71 - .long exception_none ! 72 /* B00 */ - .long exception_none ! 73 - .long exception_none ! 74 - .long exception_none ! 75 - .long do_IRQ ! 76 DMAC2 dei4 /* B80 */ - .long do_IRQ ! 77 DMAC2 dei5 - .long exception_none ! 78 - .long do_IRQ ! 79 IPSEC ipseci /* BE0 */ - .long do_IRQ ! 80 EDMAC eint0 /* C00 */ - .long do_IRQ ! 81 EDMAC eint1 - .long do_IRQ ! 82 EDMAC eint2 - .long exception_none ! 83 /* C60 */ - .long exception_none ! 84 - .long exception_none ! 85 - .long exception_none ! 86 - .long exception_none ! 87 - .long exception_none ! 88 /* D00 */ - .long exception_none ! 89 - .long exception_none ! 90 - .long exception_none ! 91 - .long exception_none ! 92 - .long exception_none ! 93 - .long exception_none ! 94 - .long exception_none ! 95 - .long do_IRQ ! 96 SIOF eri0 /* E00 */ - .long do_IRQ ! 97 txi0 - .long do_IRQ ! 98 rxi0 - .long do_IRQ ! 99 cci0 - .long do_IRQ ! 100 eri1 /* E80 */ - .long do_IRQ ! 101 txi1 - .long do_IRQ ! 102 rxi2 - .long do_IRQ ! 103 cci3 -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7300) - .long do_IRQ ! 64 - .long do_IRQ ! 65 - .long do_IRQ ! 66 - .long do_IRQ ! 67 - .long do_IRQ ! 68 - .long do_IRQ ! 69 - .long do_IRQ ! 70 - .long do_IRQ ! 71 - .long do_IRQ ! 72 - .long do_IRQ ! 73 - .long do_IRQ ! 74 - .long do_IRQ ! 75 - .long do_IRQ ! 76 - .long do_IRQ ! 77 - .long do_IRQ ! 78 - .long do_IRQ ! 79 - .long do_IRQ ! 80 SCIF0(SH7300) - .long do_IRQ ! 81 - .long do_IRQ ! 82 - .long do_IRQ ! 83 - .long do_IRQ ! 84 - .long do_IRQ ! 85 - .long do_IRQ ! 86 - .long do_IRQ ! 87 - .long do_IRQ ! 88 - .long do_IRQ ! 89 - .long do_IRQ ! 90 - .long do_IRQ ! 91 - .long do_IRQ ! 92 - .long do_IRQ ! 93 - .long do_IRQ ! 94 - .long do_IRQ ! 95 - .long do_IRQ ! 96 - .long do_IRQ ! 97 - .long do_IRQ ! 98 - .long do_IRQ ! 99 - .long do_IRQ ! 100 - .long do_IRQ ! 101 - .long do_IRQ ! 102 - .long do_IRQ ! 103 - .long do_IRQ ! 104 - .long do_IRQ ! 105 - .long do_IRQ ! 106 - .long do_IRQ ! 107 - .long do_IRQ ! 108 -#endif -#endif + + /* + * Pad the remainder of the table out, exceptions residing in far + * away offsets can be manually inserted in to their appropriate + * location via set_exception_table_{evt,vec}(). + */ + .balign 4096,0,4096 diff --git a/arch/sh/kernel/cpu/sh4/ex.S b/arch/sh/kernel/cpu/sh4/ex.S index 7146893a6cc..ac8ab57413c 100644 --- a/arch/sh/kernel/cpu/sh4/ex.S +++ b/arch/sh/kernel/cpu/sh4/ex.S @@ -4,7 +4,7 @@ * The SH-4 exception vector table. * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -53,503 +53,10 @@ ENTRY(nmi_slot) #endif ENTRY(user_break_point_trap) .long break_point_trap /* 1E0 */ -ENTRY(interrupt_table) - ! external hardware - .long do_IRQ ! 0000 /* 200 */ - .long do_IRQ ! 0001 - .long do_IRQ ! 0010 - .long do_IRQ ! 0011 - .long do_IRQ ! 0100 - .long do_IRQ ! 0101 - .long do_IRQ ! 0110 - .long do_IRQ ! 0111 - .long do_IRQ ! 1000 /* 300 */ - .long do_IRQ ! 1001 - .long do_IRQ ! 1010 - .long do_IRQ ! 1011 - .long do_IRQ ! 1100 - .long do_IRQ ! 1101 - .long do_IRQ ! 1110 - .long exception_error - ! Internal hardware -#ifndef CONFIG_CPU_SUBTYPE_SH7780 - .long do_IRQ ! TMU0 tuni0 /* 400 */ - .long do_IRQ ! TMU1 tuni1 - .long do_IRQ ! TMU2 tuni2 - .long do_IRQ ! ticpi2 -#if defined(CONFIG_CPU_SUBTYPE_SH7760) - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* 500 */ - .long exception_error - .long exception_error -#else - .long do_IRQ ! RTC ati - .long do_IRQ ! pri - .long do_IRQ ! cui - .long do_IRQ ! SCI eri - .long do_IRQ ! rxi /* 500 */ - .long do_IRQ ! txi - .long do_IRQ ! tei -#endif - .long do_IRQ ! WDT iti /* 560 */ - .long do_IRQ ! REF rcmi - .long do_IRQ ! rovi - .long do_IRQ - .long do_IRQ /* 5E0 */ - .long do_IRQ ! 32 Hitachi UDI /* 600 */ - .long do_IRQ ! 33 GPIO - .long do_IRQ ! 34 DMAC dmte0 - .long do_IRQ ! 35 dmte1 - .long do_IRQ ! 36 dmte2 - .long do_IRQ ! 37 dmte3 - .long do_IRQ ! 38 dmae - .long exception_error ! 39 /* 6E0 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7760) - .long exception_error /* 700 */ - .long exception_error - .long exception_error - .long exception_error /* 760 */ -#else - .long do_IRQ ! 40 SCIF eri /* 700 */ - .long do_IRQ ! 41 rxi - .long do_IRQ ! 42 bri - .long do_IRQ ! 43 txi -#endif -#if CONFIG_NR_ONCHIP_DMA_CHANNELS == 8 - .long do_IRQ ! 44 DMAC dmte4 /* 780 */ - .long do_IRQ ! 45 dmte5 - .long do_IRQ ! 46 dmte6 - .long do_IRQ ! 47 dmte7 /* 7E0 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7343) - .long do_IRQ ! 44 IIC1 ali /* 780 */ - .long do_IRQ ! 45 tacki - .long do_IRQ ! 46 waiti - .long do_IRQ ! 47 dtei /* 7E0 */ - .long do_IRQ ! 48 DMAC dei0 /* 800 */ - .long do_IRQ ! 49 dei1 /* 820 */ -#else - .long exception_error ! 44 /* 780 */ - .long exception_error ! 45 - .long exception_error ! 46 - .long exception_error ! 47 -#endif -#if defined(CONFIG_SH_FPU) - .long do_fpu_state_restore ! 48 /* 800 */ - .long do_fpu_state_restore ! 49 /* 820 */ -#elif !defined(CONFIG_CPU_SUBTYPE_SH7343) && \ - !defined(CONFIG_CPU_SUBTYPE_SH73180) - .long exception_error - .long exception_error -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7751) - .long exception_error /* 840 */ - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* 900 */ - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! PCI serr /* A00 */ - .long do_IRQ ! dma3 - .long do_IRQ ! dma2 - .long do_IRQ ! dma1 - .long do_IRQ ! dma0 - .long do_IRQ ! pwon - .long do_IRQ ! pwdwn - .long do_IRQ ! err - .long do_IRQ ! TMU3 tuni3 /* B00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! TMU4 tuni4 /* B80 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) - .long do_IRQ ! IRQ irq6 /* 840 */ - .long do_IRQ ! irq7 - .long do_IRQ ! SCIF eri0 - .long do_IRQ ! rxi0 - .long do_IRQ ! bri0 - .long do_IRQ ! txi0 - .long do_IRQ ! HCAN2 cani0 /* 900 */ - .long do_IRQ ! cani1 - .long do_IRQ ! SSI ssii0 - .long do_IRQ ! ssii1 - .long do_IRQ ! HAC haci0 - .long do_IRQ ! haci1 - .long do_IRQ ! IIC iici0 - .long do_IRQ ! iici1 - .long do_IRQ ! USB usbi /* A00 */ - .long do_IRQ ! LCDC vint - .long exception_error - .long exception_error - .long do_IRQ ! DMABRG dmabrgi0 - .long do_IRQ ! dmabrgi1 - .long do_IRQ ! dmabrgi2 - .long exception_error - .long do_IRQ ! SCIF eri1 /* B00 */ - .long do_IRQ ! rxi1 - .long do_IRQ ! bri1 - .long do_IRQ ! txi1 - .long do_IRQ ! eri2 - .long do_IRQ ! rxi2 - .long do_IRQ ! bri2 - .long do_IRQ ! txi2 - .long do_IRQ ! SIM simeri /* C00 */ - .long do_IRQ ! simrxi - .long do_IRQ ! simtxi - .long do_IRQ ! simtei - .long do_IRQ ! HSPI spii - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! MMCIF mmci0 /* D00 */ - .long do_IRQ ! mmci1 - .long do_IRQ ! mmci2 - .long do_IRQ ! mmci3 - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* E00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! MFI mfii - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* F00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! ADC adi - .long do_IRQ ! CMT cmti /* FA0 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7343) - .long do_IRQ ! 50 0x840 - .long do_IRQ ! 51 0x860 - .long do_IRQ ! 52 0x880 - .long do_IRQ ! 53 0x8a0 - .long do_IRQ ! 54 0x8c0 - .long do_IRQ ! 55 0x8e0 - .long do_IRQ ! 56 0x900 - .long do_IRQ ! 57 0x920 - .long do_IRQ ! 58 0x940 - .long do_IRQ ! 59 0x960 - .long do_IRQ ! 60 0x980 - .long do_IRQ ! 61 0x9a0 - .long do_IRQ ! 62 0x9c0 - .long do_IRQ ! 63 0x9e0 - .long do_IRQ ! 64 0xa00 - .long do_IRQ ! 65 0xa20 - .long do_IRQ ! 66 0xa40 - .long do_IRQ ! 67 0xa60 - .long do_IRQ ! 68 0xa80 - .long do_IRQ ! 69 0xaa0 - .long do_IRQ ! 70 0xac0 - .long do_IRQ ! 71 0xae0 - .long do_IRQ ! 72 0xb00 - .long do_IRQ ! 73 0xb20 - .long do_IRQ ! 74 0xb40 - .long do_IRQ ! 75 0xb60 - .long do_IRQ ! 76 0xb80 - .long do_IRQ ! 77 0xba0 - .long do_IRQ ! 78 0xbc0 - .long do_IRQ ! 79 0xbe0 - .long do_IRQ ! 80 0xc00 - .long do_IRQ ! 81 0xc20 - .long do_IRQ ! 82 0xc40 - .long do_IRQ ! 83 0xc60 - .long do_IRQ ! 84 0xc80 - .long do_IRQ ! 85 0xca0 - .long do_IRQ ! 86 0xcc0 - .long do_IRQ ! 87 0xce0 - .long do_IRQ ! 88 0xd00 - .long do_IRQ ! 89 0xd20 - .long do_IRQ ! 90 0xd40 - .long do_IRQ ! 91 0xd60 - .long do_IRQ ! 92 0xd80 - .long do_IRQ ! 93 0xda0 - .long do_IRQ ! 94 0xdc0 - .long do_IRQ ! 95 0xde0 - .long do_IRQ ! 96 0xe00 - .long do_IRQ ! 97 0xe20 - .long do_IRQ ! 98 0xe40 - .long do_IRQ ! 99 0xe60 - .long do_IRQ ! 100 0xe80 - .long do_IRQ ! 101 0xea0 - .long do_IRQ ! 102 0xec0 - .long do_IRQ ! 103 0xee0 - .long do_IRQ ! 104 0xf00 - .long do_IRQ ! 105 0xf20 - .long do_IRQ ! 106 0xf40 - .long do_IRQ ! 107 0xf60 - .long do_IRQ ! 108 0xf80 -#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) - .long exception_error ! 50 0x840 - .long exception_error ! 51 0x860 - .long exception_error ! 52 0x880 - .long exception_error ! 53 0x8a0 - .long exception_error ! 54 0x8c0 - .long exception_error ! 55 0x8e0 - .long exception_error ! 56 0x900 - .long exception_error ! 57 0x920 - .long exception_error ! 58 0x940 - .long exception_error ! 59 0x960 - .long exception_error ! 60 0x980 - .long exception_error ! 61 0x9a0 - .long exception_error ! 62 0x9c0 - .long exception_error ! 63 0x9e0 - .long do_IRQ ! 64 0xa00 PCI serr - .long do_IRQ ! 65 0xa20 err - .long do_IRQ ! 66 0xa40 ad - .long do_IRQ ! 67 0xa60 pwr_dwn - .long exception_error ! 68 0xa80 - .long exception_error ! 69 0xaa0 - .long exception_error ! 70 0xac0 - .long exception_error ! 71 0xae0 - .long do_IRQ ! 72 0xb00 DMA INT0 - .long do_IRQ ! 73 0xb20 INT1 - .long do_IRQ ! 74 0xb40 INT2 - .long do_IRQ ! 75 0xb60 INT3 - .long do_IRQ ! 76 0xb80 INT4 - .long exception_error ! 77 0xba0 - .long do_IRQ ! 78 0xbc0 DMA ERR - .long exception_error ! 79 0xbe0 - .long do_IRQ ! 80 0xc00 PIO0 - .long do_IRQ ! 81 0xc20 PIO1 - .long do_IRQ ! 82 0xc40 PIO2 - .long exception_error ! 83 0xc60 - .long exception_error ! 84 0xc80 - .long exception_error ! 85 0xca0 - .long exception_error ! 86 0xcc0 - .long exception_error ! 87 0xce0 - .long exception_error ! 88 0xd00 - .long exception_error ! 89 0xd20 - .long exception_error ! 90 0xd40 - .long exception_error ! 91 0xd60 - .long exception_error ! 92 0xd80 - .long exception_error ! 93 0xda0 - .long exception_error ! 94 0xdc0 - .long exception_error ! 95 0xde0 - .long exception_error ! 96 0xe00 - .long exception_error ! 97 0xe20 - .long exception_error ! 98 0xe40 - .long exception_error ! 99 0xe60 - .long exception_error ! 100 0xe80 - .long exception_error ! 101 0xea0 - .long exception_error ! 102 0xec0 - .long exception_error ! 103 0xee0 - .long exception_error ! 104 0xf00 - .long exception_error ! 105 0xf20 - .long exception_error ! 106 0xf40 - .long exception_error ! 107 0xf60 - .long exception_error ! 108 0xf80 - .long exception_error ! 109 0xfa0 - .long exception_error ! 110 0xfc0 - .long exception_error ! 111 0xfe0 - .long do_IRQ ! 112 0x1000 Mailbox - .long exception_error ! 113 0x1020 - .long exception_error ! 114 0x1040 - .long exception_error ! 115 0x1060 - .long exception_error ! 116 0x1080 - .long exception_error ! 117 0x10a0 - .long exception_error ! 118 0x10c0 - .long exception_error ! 119 0x10e0 - .long exception_error ! 120 0x1100 - .long exception_error ! 121 0x1120 - .long exception_error ! 122 0x1140 - .long exception_error ! 123 0x1160 - .long exception_error ! 124 0x1180 - .long exception_error ! 125 0x11a0 - .long exception_error ! 126 0x11c0 - .long exception_error ! 127 0x11e0 - .long exception_error ! 128 0x1200 - .long exception_error ! 129 0x1220 - .long exception_error ! 130 0x1240 - .long exception_error ! 131 0x1260 - .long exception_error ! 132 0x1280 - .long exception_error ! 133 0x12a0 - .long exception_error ! 134 0x12c0 - .long exception_error ! 135 0x12e0 - .long exception_error ! 136 0x1300 - .long exception_error ! 137 0x1320 - .long exception_error ! 138 0x1340 - .long exception_error ! 139 0x1360 - .long do_IRQ ! 140 0x1380 EMPI INV_ADDR - .long exception_error ! 141 0x13a0 - .long exception_error ! 142 0x13c0 - .long exception_error ! 143 0x13e0 -#elif defined(CONFIG_CPU_SUBTYPE_SH7770) - .long do_IRQ ! 50 0x840 - .long do_IRQ ! 51 0x860 - .long do_IRQ ! 52 0x880 - .long do_IRQ ! 53 0x8a0 - .long do_IRQ ! 54 0x8c0 - .long do_IRQ ! 55 0x8e0 - .long do_IRQ ! 56 0x900 - .long do_IRQ ! 57 0x920 - .long do_IRQ ! 58 0x940 - .long do_IRQ ! 59 0x960 - .long do_IRQ ! 60 0x980 - .long do_IRQ ! 61 0x9a0 - .long do_IRQ ! 62 0x9c0 - .long do_IRQ ! 63 0x9e0 - .long do_IRQ ! 64 0xa00 - .long do_IRQ ! 65 0xa20 - .long do_IRQ ! 66 0xa4d - .long do_IRQ ! 67 0xa60 - .long do_IRQ ! 68 0xa80 - .long do_IRQ ! 69 0xaa0 - .long do_IRQ ! 70 0xac0 - .long do_IRQ ! 71 0xae0 - .long do_IRQ ! 72 0xb00 - .long do_IRQ ! 73 0xb20 - .long do_IRQ ! 74 0xb40 - .long do_IRQ ! 75 0xb60 - .long do_IRQ ! 76 0xb80 - .long do_IRQ ! 77 0xba0 - .long do_IRQ ! 78 0xbc0 - .long do_IRQ ! 79 0xbe0 - .long do_IRQ ! 80 0xc00 - .long do_IRQ ! 81 0xc20 - .long do_IRQ ! 82 0xc40 - .long do_IRQ ! 83 0xc60 - .long do_IRQ ! 84 0xc80 - .long do_IRQ ! 85 0xca0 - .long do_IRQ ! 86 0xcc0 - .long do_IRQ ! 87 0xce0 - .long do_IRQ ! 88 0xd00 - .long do_IRQ ! 89 0xd20 - .long do_IRQ ! 90 0xd40 - .long do_IRQ ! 91 0xd60 - .long do_IRQ ! 92 0xd80 - .long do_IRQ ! 93 0xda0 - .long do_IRQ ! 94 0xdc0 - .long do_IRQ ! 95 0xde0 - .long do_IRQ ! 96 0xe00 - .long do_IRQ ! 97 0xe20 - .long do_IRQ ! 98 0xe40 - .long do_IRQ ! 99 0xe60 - .long do_IRQ ! 100 0xe80 - .long do_IRQ ! 101 0xea0 - .long do_IRQ ! 102 0xec0 - .long do_IRQ ! 103 0xee0 - .long do_IRQ ! 104 0xf00 - .long do_IRQ ! 105 0xf20 - .long do_IRQ ! 106 0xf40 - .long do_IRQ ! 107 0xf60 - .long do_IRQ ! 108 0xf80 -#endif -#else - .long exception_error /* 400 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! RTC ati - .long do_IRQ ! pri - .long do_IRQ ! cui - .long exception_error - .long exception_error /* 500 */ - .long exception_error - .long exception_error - .long do_IRQ ! WDT iti /* 560 */ - .long do_IRQ ! TMU-ch0 - .long do_IRQ ! TMU-ch1 - .long do_IRQ ! TMU-ch2 - .long do_IRQ ! ticpi2 /* 5E0 */ - .long do_IRQ ! 32 Hitachi UDI /* 600 */ - .long exception_error - .long do_IRQ ! 34 DMAC dmte0 - .long do_IRQ ! 35 dmte1 - .long do_IRQ ! 36 dmte2 - .long do_IRQ ! 37 dmte3 - .long do_IRQ ! 38 dmae - .long exception_error ! 39 /* 6E0 */ - .long do_IRQ ! 40 SCIF-ch0 eri /* 700 */ - .long do_IRQ ! 41 rxi - .long do_IRQ ! 42 bri - .long do_IRQ ! 43 txi - .long do_IRQ ! 44 DMAC dmte4 /* 780 */ - .long do_IRQ ! 45 dmte5 - .long do_IRQ ! 46 dmte6 - .long do_IRQ ! 47 dmte7 /* 7E0 */ -#if defined(CONFIG_SH_FPU) - .long do_fpu_state_restore ! 48 /* 800 */ - .long do_fpu_state_restore ! 49 /* 820 */ -#else - .long exception_error - .long exception_error -#endif - .long exception_error /* 840 */ - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! 56 CMT /* 900 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! 60 HAC - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! PCI serr /* A00 */ - .long do_IRQ ! INTA - .long do_IRQ ! INTB - .long do_IRQ ! INTC - .long do_IRQ ! INTD - .long do_IRQ ! err - .long do_IRQ ! pwd3 - .long do_IRQ ! pwd2 - .long do_IRQ ! pwd1 /* B00 */ - .long do_IRQ ! pwd0 - .long exception_error - .long exception_error - .long do_IRQ ! SCIF-ch1 eri /* B80 */ - .long do_IRQ ! rxi - .long do_IRQ ! bri - .long do_IRQ ! txi - .long do_IRQ ! SIOF /* C00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! HSPI /* C80 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! MMCIF fatat /* D00 */ - .long do_IRQ ! tran - .long do_IRQ ! err - .long do_IRQ ! frdy - .long do_IRQ ! DMAC dmint8 /* D80 */ - .long do_IRQ ! dmint9 - .long do_IRQ ! dmint10 - .long do_IRQ ! dmint11 - .long do_IRQ ! TMU-ch3 /* E00 */ - .long do_IRQ ! TMU-ch4 - .long do_IRQ ! TMU-ch5 - .long exception_error - .long do_IRQ ! SSI - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! FLCTL flste /* F00 */ - .long do_IRQ ! fltend - .long do_IRQ ! fltrq0 - .long do_IRQ ! fltrq1 - .long do_IRQ ! GPIO gpioi0 /* F80 */ - .long do_IRQ ! gpioi1 - .long do_IRQ ! gpioi2 - .long do_IRQ ! gpioi3 -#endif + /* + * Pad the remainder of the table out, exceptions residing in far + * away offsets can be manually inserted in to their appropriate + * location via set_exception_table_{evt,vec}(). + */ + .balign 4096,0,4096 diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 97f1c9af35d..07e5377bf55 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -51,3 +51,66 @@ static int __init sh7760_devices_setup(void) ARRAY_SIZE(sh7760_devices)); } __initcall(sh7760_devices_setup); + +/* + * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0 + */ +static struct intc2_data intc2_irq_table[] = { + /* INTPRIO0 | INTMSK0 */ + {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ + {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ + {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ + {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ + /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */ + /* INTPRIO4 | INTMSK0 */ + {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ + {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ + {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ + {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */ + {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */ + {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ + {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ + {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ + /* INTPRIO8 | INTMSK0 */ + {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ + {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ + {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ + {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ + {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ + {65, 8, 24, 0, 16, 3}, /* LCDC */ + /* 66, 67 unused */ + {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ + {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ + {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ + /* 71 unused */ + {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ + {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ + {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ + {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */ + {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */ + {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ + {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ + {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ + /* | INTMSK4 */ + {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ + {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ + {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ + {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ + {84, 8, 0, 4, 19, 3}, /* HSPII */ + /* INTPRIOC | INTMSK4 */ + /* 85-87 unused/reserved */ + {88, 12, 20, 4, 18, 3}, /* MMCI0 */ + {89, 12, 20, 4, 17, 3}, /* MMCI1 */ + {90, 12, 20, 4, 16, 3}, /* MMCI2 */ + {91, 12, 20, 4, 15, 3}, /* MMCI3 */ + {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/ + /* 93-107 reserved/undocumented */ + {108,12, 4, 4, 1, 3}, /* ADC */ + {109,12, 0, 4, 0, 3}, /* CMTI */ + /* 110-111 reserved/unused */ +}; + +void __init init_IRQ_intc2(void) +{ + make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); +} diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7780.c b/arch/sh/kernel/cpu/sh4/setup-sh7780.c index 72493f259ed..814ddb22653 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7780.c @@ -77,3 +77,30 @@ static int __init sh7780_devices_setup(void) ARRAY_SIZE(sh7780_devices)); } __initcall(sh7780_devices_setup); + +static struct intc2_data intc2_irq_table[] = { + { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2 }, + { 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, + { 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY }, + { 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY }, + { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + + { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + + { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY }, + { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY }, + { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY }, + { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY }, + { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY }, +}; + +void __init init_IRQ_intc2(void) +{ + make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); +} diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S index 97c571fbcdf..39aaefb2d83 100644 --- a/arch/sh/kernel/entry.S +++ b/arch/sh/kernel/entry.S @@ -1,9 +1,8 @@ -/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $ - * +/* * linux/arch/sh/entry.S * * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -78,7 +77,6 @@ OFF_TRA = (16*4+6*4) #define k3 r3 #define k4 r4 -#define k_ex_code r2_bank /* r2_bank1 */ #define g_imask r6 /* r6_bank1 */ #define k_g_imask r6_bank /* r6_bank1 */ #define current r7 /* r7_bank1 */ @@ -691,7 +689,7 @@ interrupt: 0: #endif /* defined(CONFIG_KGDB_NMI) */ bra handle_exception - mov.l @k2, k2 + mov #-1, k2 ! interrupt exception marker .align 2 1: .long EXPEVT @@ -717,8 +715,7 @@ ENTRY(handle_exception) add current, k1 mov k1, r15 ! change to kernel stack ! -1: mov #-1, k4 - mov.l 2f, k1 +1: mov.l 2f, k1 ! #ifdef CONFIG_SH_DSP mov.l r2, @-r15 ! Save r2, we need another reg @@ -763,6 +760,8 @@ skip_save: #endif ! Save the user registers on the stack. mov.l k2, @-r15 ! EXPEVT + + mov #-1, k4 mov.l k4, @-r15 ! set TRA (default: -1) ! sts.l macl, @-r15 @@ -797,8 +796,21 @@ skip_save: mov.l r2, @-r15 mov.l r1, @-r15 mov.l r0, @-r15 - ! Then, dispatch to the handler, according to the exception code. - stc k_ex_code, r8 + + /* + * This gets a bit tricky.. in the INTEVT case we don't want to use + * the VBR offset as a destination in the jump call table, since all + * of the destinations are the same. In this case, (interrupt) sets + * a marker in r2 (now r2_bank since SR.RB changed), which we check + * to determine the exception type. For all other exceptions, we + * forcibly read EXPEVT from memory and fix up the jump address, in + * the interrupt exception case we jump to do_IRQ() and defer the + * INTEVT read until there. As a bonus, we can also clean up the SR.RB + * checks that do_IRQ() was doing.. + */ + stc r2_bank, r8 + cmp/pz r8 + bf interrupt_exception shlr2 r8 shlr r8 mov.l 4f, r9 @@ -806,6 +818,8 @@ skip_save: mov.l @r9, r9 jmp @r9 nop + rts + nop .align 2 1: .long 0x00001000 ! DSP=1 @@ -813,8 +827,17 @@ skip_save: 3: .long 0xcfffffff ! RB=0, BL=0 4: .long exception_handling_table +interrupt_exception: + mov.l 1f, r9 + jmp @r9 + nop + rts + nop + + .align 2 +1: .long do_IRQ + .align 2 ENTRY(exception_none) rts nop - diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index c7ebd6aec95..944128ce970 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -11,12 +11,15 @@ #include <linux/module.h> #include <linux/kernel_stat.h> #include <linux/seq_file.h> +#include <linux/io.h> #include <asm/irq.h> #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/thread_info.h> #include <asm/cpu/mmu_context.h> +atomic_t irq_err_count; + /* * 'what should we do if we get a hw irq event on an illegal vector'. * each architecture has to answer this themselves, it doesn't deserve @@ -24,6 +27,7 @@ */ void ack_bad_irq(unsigned int irq) { + atomic_inc(&irq_err_count); printk("unexpected IRQ trap at vector %02x\n", irq); } @@ -47,8 +51,10 @@ int show_interrupts(struct seq_file *p, void *v) if (!action) goto unlock; seq_printf(p, "%3d: ",i); - seq_printf(p, "%10u ", kstat_irqs(i)); - seq_printf(p, " %14s", irq_desc[i].chip->typename); + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); + seq_printf(p, " %14s", irq_desc[i].chip->name); + seq_printf(p, "-%-8s", irq_desc[i].name); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) @@ -56,7 +62,9 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); unlock: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } + } else if (i == NR_IRQS) + seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); + return 0; } #endif @@ -78,7 +86,8 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs regs) { - int irq = r4; + struct pt_regs *old_regs = set_irq_regs(®s); + int irq; #ifdef CONFIG_4KSTACKS union irq_ctx *curctx, *irqctx; #endif @@ -102,20 +111,9 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, #endif #ifdef CONFIG_CPU_HAS_INTEVT - __asm__ __volatile__ ( -#ifdef CONFIG_CPU_HAS_SR_RB - "stc r2_bank, %0\n\t" + irq = (ctrl_inl(INTEVT) >> 5) - 16; #else - "mov.l @%1, %0\n\t" -#endif - "shlr2 %0\n\t" - "shlr2 %0\n\t" - "shlr %0\n\t" - "add #-16, %0\n\t" - : "=z" (irq), "=r" (r4) - : "1" (INTEVT) - : "memory" - ); + irq = r4; #endif irq = irq_demux(irq); @@ -139,25 +137,25 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, __asm__ __volatile__ ( "mov %0, r4 \n" - "mov %1, r5 \n" "mov r15, r9 \n" - "jsr @%2 \n" + "jsr @%1 \n" /* swith to the irq stack */ - " mov %3, r15 \n" + " mov %2, r15 \n" /* restore the stack (ring zero) */ "mov r9, r15 \n" : /* no outputs */ - : "r" (irq), "r" (®s), "r" (__do_IRQ), "r" (isp) + : "r" (irq), "r" (generic_handle_irq), "r" (isp) /* XXX: A somewhat excessive clobber list? -PFM */ : "memory", "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "t", "pr" ); } else #endif - __do_IRQ(irq, ®s); + generic_handle_irq(irq); irq_exit(); + set_irq_regs(old_regs); return 1; } diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 0b1d5dd7a93..a52b13ac6b7 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -5,6 +5,7 @@ * Copyright (C) 1995 Linus Torvalds * * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC */ /* @@ -104,7 +105,7 @@ void show_regs(struct pt_regs * regs) { printk("\n"); printk("Pid : %d, Comm: %20s\n", current->pid, current->comm); - print_symbol("PC is at %s\n", regs->pc); + print_symbol("PC is at %s\n", instruction_pointer(regs)); printk("PC : %08lx SP : %08lx SR : %08lx ", regs->pc, regs->regs[15], regs->sr); #ifdef CONFIG_MMU @@ -129,15 +130,7 @@ void show_regs(struct pt_regs * regs) printk("MACH: %08lx MACL: %08lx GBR : %08lx PR : %08lx\n", regs->mach, regs->macl, regs->gbr, regs->pr); - /* - * If we're in kernel mode, dump the stack too.. - */ - if (!user_mode(regs)) { - extern void show_task(unsigned long *sp); - unsigned long sp = regs->regs[15]; - - show_task((unsigned long *)sp); - } + show_trace(NULL, (unsigned long *)regs->regs[15], regs); } /* @@ -290,6 +283,24 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, static void ubc_set_tracing(int asid, unsigned long pc) { +#if defined(CONFIG_CPU_SH4A) + unsigned long val; + + val = (UBC_CBR_ID_INST | UBC_CBR_RW_READ | UBC_CBR_CE); + val |= (UBC_CBR_AIE | UBC_CBR_AIV_SET(asid)); + + ctrl_outl(val, UBC_CBR0); + ctrl_outl(pc, UBC_CAR0); + ctrl_outl(0x0, UBC_CAMR0); + ctrl_outl(0x0, UBC_CBCR); + + val = (UBC_CRR_RES | UBC_CRR_PCB | UBC_CRR_BIE); + ctrl_outl(val, UBC_CRR0); + + /* Read UBC register that we writed last. For chekking UBC Register changed */ + val = ctrl_inl(UBC_CRR0); + +#else /* CONFIG_CPU_SH4A */ ctrl_outl(pc, UBC_BARA); #ifdef CONFIG_MMU @@ -307,6 +318,7 @@ ubc_set_tracing(int asid, unsigned long pc) ctrl_outw(BBR_INST | BBR_READ, UBC_BBRA); ctrl_outw(BRCR_PCBA, UBC_BRCR); } +#endif /* CONFIG_CPU_SH4A */ } /* @@ -359,8 +371,13 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne #endif ubc_set_tracing(asid, next->thread.ubc_pc); } else { +#if defined(CONFIG_CPU_SH4A) + ctrl_outl(UBC_CBR_INIT, UBC_CBR0); + ctrl_outl(UBC_CRR_INIT, UBC_CRR0); +#else ctrl_outw(0, UBC_BBRA); ctrl_outw(0, UBC_BBRB); +#endif } return prev; @@ -460,8 +477,13 @@ asmlinkage void break_point_trap(unsigned long r4, unsigned long r5, struct pt_regs regs) { /* Clear tracing. */ +#if defined(CONFIG_CPU_SH4A) + ctrl_outl(UBC_CBR_INIT, UBC_CBR0); + ctrl_outl(UBC_CRR_INIT, UBC_CRR0); +#else ctrl_outw(0, UBC_BBRA); ctrl_outw(0, UBC_BBRB); +#endif current->thread.ubc_pc = 0; ubc_usercnt -= 1; diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S index 768334e9507..ca81976e9e3 100644 --- a/arch/sh/kernel/syscalls.S +++ b/arch/sh/kernel/syscalls.S @@ -351,3 +351,6 @@ ENTRY(sys_call_table) .long sys_sync_file_range .long sys_tee /* 315 */ .long sys_vmsplice + .long sys_move_pages + .long sys_getcpu + .long sys_epoll_pwait diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 450c68f1df0..57e708d7b52 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -47,6 +47,7 @@ unsigned long long __attribute__ ((weak)) sched_clock(void) return (unsigned long long)jiffies * (1000000000 / HZ); } +#ifndef CONFIG_GENERIC_TIME void do_gettimeofday(struct timeval *tv) { unsigned long seq; @@ -99,6 +100,7 @@ int do_settimeofday(struct timespec *tv) return 0; } EXPORT_SYMBOL(do_settimeofday); +#endif /* !CONFIG_GENERIC_TIME */ /* last time the RTC clock got updated */ static long last_rtc_update; @@ -107,13 +109,14 @@ static long last_rtc_update; * handle_timer_tick() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -void handle_timer_tick(struct pt_regs *regs) +void handle_timer_tick(void) { do_timer(1); #ifndef CONFIG_SMP - update_process_times(user_mode(regs)); + update_process_times(user_mode(get_irq_regs())); #endif - profile_tick(CPU_PROFILING, regs); + if (current->pid) + profile_tick(CPU_PROFILING); #ifdef CONFIG_HEARTBEAT if (sh_mv.mv_heartbeat != NULL) diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 205816fcf0d..24927015dc3 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -80,8 +80,7 @@ static unsigned long tmu_timer_get_offset(void) return count; } -static irqreturn_t tmu_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t tmu_timer_interrupt(int irq, void *dummy) { unsigned long timer_status; @@ -98,7 +97,7 @@ static irqreturn_t tmu_timer_interrupt(int irq, void *dev_id, * locally disabled. -arca */ write_seqlock(&xtime_lock); - handle_timer_tick(regs); + handle_timer_tick(); write_sequnlock(&xtime_lock); return IRQ_HANDLED; @@ -111,60 +110,6 @@ static struct irqaction tmu_irq = { .mask = CPU_MASK_NONE, }; -/* - * Hah! We'll see if this works (switching from usecs to nsecs). - */ -static unsigned long tmu_timer_get_frequency(void) -{ - u32 freq; - struct timespec ts1, ts2; - unsigned long diff_nsec; - unsigned long factor; - - /* Setup the timer: We don't want to generate interrupts, just - * have it count down at its natural rate. - */ - ctrl_outb(0, TMU_TSTR); -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760) - ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); -#endif - ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR); - ctrl_outl(0xffffffff, TMU0_TCOR); - ctrl_outl(0xffffffff, TMU0_TCNT); - - rtc_sh_get_time(&ts2); - - do { - rtc_sh_get_time(&ts1); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - /* actually start the timer */ - ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); - - do { - rtc_sh_get_time(&ts2); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - freq = 0xffffffff - ctrl_inl(TMU0_TCNT); - if (ts2.tv_nsec < ts1.tv_nsec) { - ts2.tv_nsec += 1000000000; - ts2.tv_sec--; - } - - diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec); - - /* this should work well if the RTC has a precision of n Hz, where - * n is an integer. I don't think we have to worry about the other - * cases. */ - factor = (1000000000 + diff_nsec/2) / diff_nsec; - - if (factor * diff_nsec > 1100000000 || - factor * diff_nsec < 900000000) - panic("weird RTC (diff_nsec %ld)", diff_nsec); - - return freq * factor; -} - static void tmu_clk_init(struct clk *clk) { u8 divisor = TMU0_TCR_INIT & 0x7; @@ -232,12 +177,12 @@ struct sys_timer_ops tmu_timer_ops = { .init = tmu_timer_init, .start = tmu_timer_start, .stop = tmu_timer_stop, - .get_frequency = tmu_timer_get_frequency, +#ifndef CONFIG_GENERIC_TIME .get_offset = tmu_timer_get_offset, +#endif }; struct sys_timer tmu_timer = { .name = "tmu", .ops = &tmu_timer_ops, }; - diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index c2c597e0948..53dfa55f315 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -1,38 +1,25 @@ -/* $Id: traps.c,v 1.17 2004/05/02 01:46:30 sugioka Exp $ - * - * linux/arch/sh/traps.c +/* + * 'traps.c' handles hardware traps and faults after we have saved some + * state in 'entry.S'. * * SuperH version: Copyright (C) 1999 Niibe Yutaka * Copyright (C) 2000 Philipp Rumpf * Copyright (C) 2000 David Howells - * Copyright (C) 2002, 2003 Paul Mundt - */ - -/* - * 'Traps.c' handles hardware traps and faults after we have saved some - * state in 'entry.S'. + * Copyright (C) 2002 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ -#include <linux/sched.h> #include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> #include <linux/ptrace.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/init.h> -#include <linux/delay.h> #include <linux/spinlock.h> #include <linux/module.h> #include <linux/kallsyms.h> - +#include <linux/io.h> #include <asm/system.h> #include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/atomic.h> -#include <asm/processor.h> -#include <asm/sections.h> #ifdef CONFIG_SH_KGDB #include <asm/kgdb.h> @@ -53,13 +40,32 @@ #define TRAP_ILLEGAL_SLOT_INST 13 #endif -/* - * These constants are for searching for possible module text - * segments. VMALLOC_OFFSET comes from mm/vmalloc.c; MODULE_RANGE is - * a guess of how much space is likely to be vmalloced. - */ -#define VMALLOC_OFFSET (8*1024*1024) -#define MODULE_RANGE (8*1024*1024) +static void dump_mem(const char *str, unsigned long bottom, unsigned long top) +{ + unsigned long p; + int i; + + printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top); + + for (p = bottom & ~31; p < top; ) { + printk("%04lx: ", p & 0xffff); + + for (i = 0; i < 8; i++, p += 4) { + unsigned int val; + + if (p < bottom || p >= top) + printk(" "); + else { + if (__get_user(val, (unsigned int __user *)p)) { + printk("\n"); + return; + } + printk("%08x ", val); + } + } + printk("\n"); + } +} DEFINE_SPINLOCK(die_lock); @@ -69,14 +75,28 @@ void die(const char * str, struct pt_regs * regs, long err) console_verbose(); spin_lock_irq(&die_lock); + bust_spinlocks(1); + printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); + CHK_REMOTE_DEBUG(regs); + print_modules(); show_regs(regs); + + printk("Process: %s (pid: %d, stack limit = %p)\n", + current->comm, current->pid, task_stack_page(current) + 1); + + if (!user_mode(regs) || in_interrupt()) + dump_mem("Stack: ", regs->regs[15], THREAD_SIZE + + (unsigned long)task_stack_page(current)); + + bust_spinlocks(0); spin_unlock_irq(&die_lock); do_exit(SIGSEGV); } -static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err) +static inline void die_if_kernel(const char *str, struct pt_regs *regs, + long err) { if (!user_mode(regs)) die(str, regs, err); @@ -93,8 +113,7 @@ static int handle_unaligned_notify_count = 10; */ static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err) { - if (!user_mode(regs)) - { + if (!user_mode(regs)) { const struct exception_table_entry *fixup; fixup = search_exception_tables(regs->pc); if (fixup) { @@ -550,7 +569,10 @@ int is_dsp_inst(struct pt_regs *regs) #define is_dsp_inst(regs) (0) #endif /* CONFIG_SH_DSP */ -extern int do_fpu_inst(unsigned short, struct pt_regs*); +/* arch/sh/kernel/cpu/sh4/fpu.c */ +extern int do_fpu_inst(unsigned short, struct pt_regs *); +extern asmlinkage void do_fpu_state_restore(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, struct pt_regs regs); asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, @@ -709,14 +731,20 @@ void __init per_cpu_trap_init(void) : "memory"); } -void __init trap_init(void) +void *set_exception_table_vec(unsigned int vec, void *handler) { extern void *exception_handling_table[]; + void *old_handler; + + old_handler = exception_handling_table[vec]; + exception_handling_table[vec] = handler; + return old_handler; +} - exception_handling_table[TRAP_RESERVED_INST] - = (void *)do_reserved_inst; - exception_handling_table[TRAP_ILLEGAL_SLOT_INST] - = (void *)do_illegal_slot_inst; +void __init trap_init(void) +{ + set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst); + set_exception_table_vec(TRAP_ILLEGAL_SLOT_INST, do_illegal_slot_inst); #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \ defined(CONFIG_SH_FPU_EMU) @@ -725,61 +753,54 @@ void __init trap_init(void) * reserved. They'll be handled in the math-emu case, or faulted on * otherwise. */ - /* entry 64 corresponds to EXPEVT=0x800 */ - exception_handling_table[64] = (void *)do_reserved_inst; - exception_handling_table[65] = (void *)do_illegal_slot_inst; + set_exception_table_evt(0x800, do_reserved_inst); + set_exception_table_evt(0x820, do_illegal_slot_inst); +#elif defined(CONFIG_SH_FPU) + set_exception_table_evt(0x800, do_fpu_state_restore); + set_exception_table_evt(0x820, do_fpu_state_restore); #endif /* Setup VBR for boot cpu */ per_cpu_trap_init(); } -void show_stack(struct task_struct *tsk, unsigned long *sp) +void show_trace(struct task_struct *tsk, unsigned long *sp, + struct pt_regs *regs) { - unsigned long *stack, addr; - unsigned long module_start = VMALLOC_START; - unsigned long module_end = VMALLOC_END; - int i = 1; - - if (!tsk) - tsk = current; - if (tsk == current) - sp = (unsigned long *)current_stack_pointer; - else - sp = (unsigned long *)tsk->thread.sp; + unsigned long addr; - stack = sp; + if (regs && user_mode(regs)) + return; printk("\nCall trace: "); #ifdef CONFIG_KALLSYMS printk("\n"); #endif - while (!kstack_end(stack)) { - addr = *stack++; - if (((addr >= (unsigned long)_text) && - (addr <= (unsigned long)_etext)) || - ((addr >= module_start) && (addr <= module_end))) { - /* - * For 80-columns display, 6 entry is maximum. - * NOTE: '[<8c00abcd>] ' consumes 13 columns . - */ -#ifndef CONFIG_KALLSYMS - if (i && ((i % 6) == 0)) - printk("\n "); -#endif - printk("[<%08lx>] ", addr); - print_symbol("%s\n", addr); - i++; - } + while (!kstack_end(sp)) { + addr = *sp++; + if (kernel_text_address(addr)) + print_ip_sym(addr); } printk("\n"); } -void show_task(unsigned long *sp) +void show_stack(struct task_struct *tsk, unsigned long *sp) { - show_stack(NULL, sp); + unsigned long stack; + + if (!tsk) + tsk = current; + if (tsk == current) + sp = (unsigned long *)current_stack_pointer; + else + sp = (unsigned long *)tsk->thread.sp; + + stack = (unsigned long)sp; + dump_mem("Stack: ", stack, THREAD_SIZE + + (unsigned long)task_stack_page(tsk)); + show_trace(tsk, sp, NULL); } void dump_stack(void) diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 5eb93091818..77b4026d568 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -76,13 +76,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index c81e6b67ad3..38c82d890ff 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -28,6 +28,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) split_page(page, order); ret = page_address(page); + memset(ret, 0, size); *handle = virt_to_phys(ret); /* |