diff options
Diffstat (limited to 'arch/sh')
27 files changed, 439 insertions, 121 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 7048c03490d..fb5805745ac 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -57,6 +57,7 @@ config SH_7724_SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select 7724 SolutionEngine if configuring for a Hitachi SH7724 evaluation board. @@ -140,6 +141,7 @@ config SH_RSK bool "Renesas Starter Kit" depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select this option if configuring for any of the RSK+ MCU evaluation platforms. @@ -159,6 +161,7 @@ config SH_SDK7786 select NO_IOPORT if !PCI select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_SRAM_POOL + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select SDK7786 if configuring for a Renesas Technology Europe SH7786-65nm board. @@ -173,6 +176,7 @@ config SH_SH7757LCR bool "SH7757LCR" depends on CPU_SUBTYPE_SH7757 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR config SH_SH7785LCR bool "SH7785LCR" @@ -206,6 +210,7 @@ config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. @@ -214,6 +219,7 @@ config SH_AP325RXA bool "AP-325RXA" depends on CPU_SUBTYPE_SH7723 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" @@ -222,6 +228,7 @@ config SH_KFR2R09 bool "KFR2R09" depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help "Kit For R2R for 2009" support. @@ -230,6 +237,7 @@ config SH_ECOVEC depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB select SND_SOC_DA7210 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "R0P7724LC0011/21RL (EcoVec)" support. @@ -305,6 +313,7 @@ config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" depends on CPU_SUBTYPE_SH7720 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Magic Panel R2 if configuring for Magic Panel R2. @@ -316,6 +325,7 @@ config SH_CAYMAN config SH_POLARIS bool "SMSC Polaris" select CPU_HAS_IPR_IRQ + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7709 help Select if configuring for an SMSC Polaris development board @@ -323,6 +333,7 @@ config SH_POLARIS config SH_SH2007 bool "SH-2007 board" select NO_IOPORT + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7780 help SH-2007 is a single-board computer based around SH7780 chip @@ -334,6 +345,7 @@ config SH_SH2007 config SH_APSH4A3A bool "AP-SH4A-3A" select SH_ALPHA_BOARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7785 help Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. @@ -342,6 +354,7 @@ config SH_APSH4AD0A bool "AP-SH4AD-0A" select SH_ALPHA_BOARD select SYS_SUPPORTS_PCI + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7786 help Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c index 2823619c600..0a39c241628 100644 --- a/arch/sh/boards/board-apsh4a3a.c +++ b/arch/sh/boards/board-apsh4a3a.c @@ -13,6 +13,8 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/irq.h> #include <linux/clk.h> @@ -66,6 +68,12 @@ static struct platform_device nor_flash_device = { .resource = nor_flash_resources, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -105,6 +113,8 @@ static struct platform_device *apsh4a3a_devices[] __initdata = { static int __init apsh4a3a_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(apsh4a3a_devices, ARRAY_SIZE(apsh4a3a_devices)); } diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c index b4d6292a924..92eac3a9918 100644 --- a/arch/sh/boards/board-apsh4ad0a.c +++ b/arch/sh/boards/board-apsh4ad0a.c @@ -12,12 +12,20 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/irq.h> #include <linux/clk.h> #include <asm/machvec.h> #include <asm/sizes.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -56,6 +64,8 @@ static struct platform_device *apsh4ad0a_devices[] __initdata = { static int __init apsh4ad0a_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(apsh4ad0a_devices, ARRAY_SIZE(apsh4ad0a_devices)); } diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 90568f9de3a..20500858b56 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -14,6 +14,8 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -24,6 +26,12 @@ #include <asm/heartbeat.h> #include <cpu/sh7720.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + #define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) /* Wait until reset finished. Timeout is 100ms. */ @@ -348,6 +356,8 @@ static struct platform_device *mpr2_devices[] __initdata = { static int __init mpr2_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); } device_initcall(mpr2_devices_setup); diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c index 0978ae2e484..37a08d09472 100644 --- a/arch/sh/boards/board-polaris.c +++ b/arch/sh/boards/board-polaris.c @@ -9,6 +9,8 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/io.h> #include <asm/irq.h> @@ -22,6 +24,12 @@ #define AREA5_WAIT_CTRL (0x1C00) #define WAIT_STATES_10 (0x7) +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -88,6 +96,8 @@ static int __init polaris_initialise(void) printk(KERN_INFO "Configuring Polaris external bus\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* Configure area 5 with 2 wait states */ wcr = __raw_readw(WCR2); wcr &= (~AREA5_WAIT_CTRL); diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c index b90b78f6a82..1980bb7e578 100644 --- a/arch/sh/boards/board-sh2007.c +++ b/arch/sh/boards/board-sh2007.c @@ -6,6 +6,8 @@ */ #include <linux/init.h> #include <linux/irq.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> @@ -13,6 +15,14 @@ #include <asm/machvec.h> #include <mach/sh2007.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + struct smsc911x_platform_config smc911x_info = { .flags = SMSC911X_USE_32BIT, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -98,6 +108,8 @@ static struct platform_device *sh2007_devices[] __initdata = { static int __init sh2007_io_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices)); return 0; } diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 5087f8bb4cf..41f86702eb9 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -12,6 +12,8 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/irq.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/io.h> @@ -199,6 +201,15 @@ static struct platform_device sh7757_eth_giga1_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + /* SH_MMCIF */ static struct resource sh_mmcif_resources[] = { [0] = { @@ -329,6 +340,9 @@ static struct spi_board_info spi_board_info[] = { static int __init sh7757lcr_devices_setup(void) { + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* RGMII (PTA) */ gpio_request(GPIO_FN_ET0_MDC, NULL); gpio_request(GPIO_FN_ET0_MDIO, NULL); diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index f33ebf44707..9e963c1d144 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -20,6 +20,8 @@ #include <linux/mtd/sh_flctl.h> #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/gpio.h> #include <linux/videodev2.h> @@ -34,6 +36,12 @@ #include <asm/suspend.h> #include <cpu/sh7723.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -423,6 +431,15 @@ static struct platform_device ceu_device = { }, }; +/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn3_resources[] = { [0] = { .name = "SDHI0", @@ -544,6 +561,10 @@ static int __init ap325rxa_devices_setup(void) &ap325rxa_sdram_leave_start, &ap325rxa_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* LD3 and LD4 LEDs */ gpio_request(GPIO_PTX5, NULL); /* RUN */ gpio_direction_output(GPIO_PTX5, 1); diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 4158d70c0de..64559e8af14 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/i2c.h> @@ -242,9 +244,17 @@ static int usbhs_get_id(struct platform_device *pdev) return gpio_get_value(GPIO_PTB3); } +static void usbhs_phy_reset(struct platform_device *pdev) +{ + /* enable vbus if HOST */ + if (!gpio_get_value(GPIO_PTB3)) + gpio_set_value(GPIO_PTB5, 1); +} + static struct renesas_usbhs_platform_info usbhs_info = { .platform_callback = { .get_id = usbhs_get_id, + .phy_reset = usbhs_phy_reset, }, .driver_param = { .buswait_bwait = 4, @@ -518,10 +528,86 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; +static struct regulator_consumer_supply cn12_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn12_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers), + .consumer_supplies = cn12_power_consumers, +}; + +static struct fixed_voltage_config cn12_power_info = { + .supply_name = "CN12 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB7, + .enable_high = 1, + .init_data = &cn12_power_init_data, +}; + +static struct platform_device cn12_power = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &cn12_power_info, + }, +}; + #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) /* SDHI0 */ +static struct regulator_consumer_supply sdhi0_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data sdhi0_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers), + .consumer_supplies = sdhi0_power_consumers, +}; + +static struct fixed_voltage_config sdhi0_power_info = { + .supply_name = "CN11 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB6, + .enable_high = 1, + .init_data = &sdhi0_power_init_data, +}; + +static struct platform_device sdhi0_power = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdhi0_power_info, + }, +}; + static void sdhi0_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB6, NULL); + if (!ret) { + power_gpio = GPIO_PTB6; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB6, state); } @@ -562,13 +648,27 @@ static struct platform_device sdhi0_device = { }, }; -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) -/* SDHI1 */ -static void sdhi1_set_pwr(struct platform_device *pdev, int state) +static void cn12_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB7, NULL); + if (!ret) { + power_gpio = GPIO_PTB7; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB7, state); } +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +/* SDHI1 */ static int sdhi1_get_cd(struct platform_device *pdev) { return !gpio_get_value(GPIO_PTW7); @@ -579,7 +679,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | MMC_CAP_NEEDS_POLL, - .set_pwr = sdhi1_set_pwr, + .set_pwr = cn12_set_pwr, .get_cd = sdhi1_get_cd, }; @@ -899,14 +999,9 @@ static struct platform_device vou_device = { #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SH_MMCIF */ -static void mmcif_set_pwr(struct platform_device *pdev, int state) -{ - gpio_set_value(GPIO_PTB7, state); -} - static void mmcif_down_pwr(struct platform_device *pdev) { - gpio_set_value(GPIO_PTB7, 0); + cn12_set_pwr(pdev, 0); } static struct resource sh_mmcif_resources[] = { @@ -929,7 +1024,7 @@ static struct resource sh_mmcif_resources[] = { }; static struct sh_mmcif_plat_data sh_mmcif_plat = { - .set_pwr = mmcif_set_pwr, + .set_pwr = cn12_set_pwr, .down_pwr = mmcif_down_pwr, .sup_pclk = 0, /* SH7724: Max Pclk/2 */ .caps = MMC_CAP_4_BIT_DATA | @@ -960,7 +1055,9 @@ static struct platform_device *ecovec_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &cn12_power, #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + &sdhi0_power, &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, @@ -1258,8 +1355,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI0D2, NULL); gpio_request(GPIO_FN_SDHI0D1, NULL); gpio_request(GPIO_FN_SDHI0D0, NULL); - gpio_request(GPIO_PTB6, NULL); - gpio_direction_output(GPIO_PTB6, 0); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); @@ -1288,8 +1383,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_MMC_D0, NULL); gpio_request(GPIO_FN_MMC_CLK, NULL); gpio_request(GPIO_FN_MMC_CMD, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); cn12_enabled = true; #elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) @@ -1301,8 +1394,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI1D2, NULL); gpio_request(GPIO_FN_SDHI1D1, NULL); gpio_request(GPIO_FN_SDHI1D0, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); /* Card-detect, used on CN12 with SDHI1 */ gpio_request(GPIO_PTW7, NULL); diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 43a179ce9af..f2a4304fbe2 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -21,6 +21,8 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/videodev2.h> #include <linux/sh_intc.h> @@ -341,6 +343,13 @@ static struct platform_device kfr2r09_camera = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource kfr2r09_sh_sdhi0_resources[] = { [0] = { .name = "SDHI0", @@ -523,6 +532,9 @@ static int __init kfr2r09_devices_setup(void) &kfr2r09_sdram_leave_start, &kfr2r09_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* enable SCIF1 serial port for YC401 console support */ gpio_request(GPIO_FN_SCIF1_RXD, NULL); gpio_request(GPIO_FN_SCIF1_TXD, NULL); diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index a8a1ca741c8..8b73194ed2c 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -17,6 +17,8 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smc91x.h> #include <linux/delay.h> #include <linux/clk.h> @@ -386,6 +388,13 @@ static struct platform_device migor_ceu_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource sdhi_cn9_resources[] = { [0] = { .name = "SDHI", @@ -498,6 +507,10 @@ static int __init migor_devices_setup(void) &migor_sdram_enter_end, &migor_sdram_leave_start, &migor_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Let D11 LED show STATUS0 */ gpio_request(GPIO_FN_STATUS0, NULL); diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c index 895f030070d..2685ea03b06 100644 --- a/arch/sh/boards/mach-rsk/setup.c +++ b/arch/sh/boards/mach-rsk/setup.c @@ -16,9 +16,17 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/map.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <asm/machvec.h> #include <asm/io.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition rsk_partitions[] = { @@ -67,6 +75,8 @@ static struct platform_device *rsk_devices[] __initdata = { static int __init rsk_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(rsk_devices, ARRAY_SIZE(rsk_devices)); } diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index 27a2314f50a..c29268bfd34 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -11,6 +11,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/i2c.h> #include <linux/irq.h> @@ -38,6 +40,12 @@ static struct platform_device heartbeat_device = { .resource = &heartbeat_resource, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -236,6 +244,8 @@ static void __init sdk7786_setup(char **cmdline_p) { pr_info("Renesas Technology Europe SDK7786 support:\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sdk7786_fpga_init(); sdk7786_nmi_init(); diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index ffbf5bc7366..35f6efa3ac0 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -18,6 +18,8 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smc91x.h> #include <linux/gpio.h> #include <linux/input.h> @@ -454,6 +456,15 @@ static struct platform_device sh7724_usb1_gadget_device = { .resource = sh7724_usb1_gadget_resources, }; +/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn7_resources[] = { [0] = { .name = "SDHI0", @@ -684,6 +695,10 @@ static int __init devices_setup(void) &ms7724se_sdram_enter_end, &ms7724se_sdram_leave_start, &ms7724se_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Reset Release */ fpga_out = __raw_readw(FPGA_OUT); /* bit4: NTSC_PDN, bit5: NTSC_RESET */ diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 4c171f13b0e..b2256562314 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -335,7 +335,7 @@ static int dmae_irq_init(void) for (n = 0; n < NR_DMAE; n++) { int i = request_irq(get_dma_error_irq(n), dma_err, - IRQF_SHARED, dmae_name[n], NULL); + IRQF_SHARED, dmae_name[n], (void *)dmae_name[n]); if (unlikely(i < 0)) { printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]); return i; diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h index 4a5350037c8..1b6199740e9 100644 --- a/arch/sh/include/asm/sections.h +++ b/arch/sh/include/asm/sections.h @@ -6,7 +6,6 @@ extern long __nosave_begin, __nosave_end; extern long __machvec_start, __machvec_end; extern char __uncached_start, __uncached_end; -extern char _ebss[]; extern char __start_eh_frame[], __stop_eh_frame[]; #endif /* __ASM_SH_SECTIONS_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h index 48d14498e77..2a0ca8780f0 100644 --- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h +++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h @@ -183,18 +183,30 @@ enum { GPIO_FN_DV_DATA1, GPIO_FN_DV_DATA0, GPIO_FN_LCD_CLK, GPIO_FN_LCD_EXTCLK, GPIO_FN_LCD_VSYNC, GPIO_FN_LCD_HSYNC, GPIO_FN_LCD_DE, - GPIO_FN_LCD_DATA23, GPIO_FN_LCD_DATA22, - GPIO_FN_LCD_DATA21, GPIO_FN_LCD_DATA20, - GPIO_FN_LCD_DATA19, GPIO_FN_LCD_DATA18, - GPIO_FN_LCD_DATA17, GPIO_FN_LCD_DATA16, - GPIO_FN_LCD_DATA15, GPIO_FN_LCD_DATA14, - GPIO_FN_LCD_DATA13, GPIO_FN_LCD_DATA12, - GPIO_FN_LCD_DATA11, GPIO_FN_LCD_DATA10, - GPIO_FN_LCD_DATA9, GPIO_FN_LCD_DATA8, - GPIO_FN_LCD_DATA7, GPIO_FN_LCD_DATA6, - GPIO_FN_LCD_DATA5, GPIO_FN_LCD_DATA4, - GPIO_FN_LCD_DATA3, GPIO_FN_LCD_DATA2, - GPIO_FN_LCD_DATA1, GPIO_FN_LCD_DATA0, + GPIO_FN_LCD_DATA23_PG23, GPIO_FN_LCD_DATA22_PG22, + GPIO_FN_LCD_DATA21_PG21, GPIO_FN_LCD_DATA20_PG20, + GPIO_FN_LCD_DATA19_PG19, GPIO_FN_LCD_DATA18_PG18, + GPIO_FN_LCD_DATA17_PG17, GPIO_FN_LCD_DATA16_PG16, + GPIO_FN_LCD_DATA15_PG15, GPIO_FN_LCD_DATA14_PG14, + GPIO_FN_LCD_DATA13_PG13, GPIO_FN_LCD_DATA12_PG12, + GPIO_FN_LCD_DATA11_PG11, GPIO_FN_LCD_DATA10_PG10, + GPIO_FN_LCD_DATA9_PG9, GPIO_FN_LCD_DATA8_PG8, + GPIO_FN_LCD_DATA7_PG7, GPIO_FN_LCD_DATA6_PG6, + GPIO_FN_LCD_DATA5_PG5, GPIO_FN_LCD_DATA4_PG4, + GPIO_FN_LCD_DATA3_PG3, GPIO_FN_LCD_DATA2_PG2, + GPIO_FN_LCD_DATA1_PG1, GPIO_FN_LCD_DATA0_PG0, + GPIO_FN_LCD_DATA23_PJ23, GPIO_FN_LCD_DATA22_PJ22, + GPIO_FN_LCD_DATA21_PJ21, GPIO_FN_LCD_DATA20_PJ20, + GPIO_FN_LCD_DATA19_PJ19, GPIO_FN_LCD_DATA18_PJ18, + GPIO_FN_LCD_DATA17_PJ17, GPIO_FN_LCD_DATA16_PJ16, + GPIO_FN_LCD_DATA15_PJ15, GPIO_FN_LCD_DATA14_PJ14, + GPIO_FN_LCD_DATA13_PJ13, GPIO_FN_LCD_DATA12_PJ12, + GPIO_FN_LCD_DATA11_PJ11, GPIO_FN_LCD_DATA10_PJ10, + GPIO_FN_LCD_DATA9_PJ9, GPIO_FN_LCD_DATA8_PJ8, + GPIO_FN_LCD_DATA7_PJ7, GPIO_FN_LCD_DATA6_PJ6, + GPIO_FN_LCD_DATA5_PJ5, GPIO_FN_LCD_DATA4_PJ4, + GPIO_FN_LCD_DATA3_PJ3, GPIO_FN_LCD_DATA2_PJ2, + GPIO_FN_LCD_DATA1_PJ1, GPIO_FN_LCD_DATA0_PJ0, GPIO_FN_LCD_M_DISP, }; diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h index 41f9f8b9db7..5340f3bc186 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7757.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7757.h @@ -283,5 +283,7 @@ enum { SHDMA_SLAVE_RIIC8_RX, SHDMA_SLAVE_RIIC9_TX, SHDMA_SLAVE_RIIC9_RX, + SHDMA_SLAVE_RSPI_TX, + SHDMA_SLAVE_RSPI_RX, }; #endif /* __ASM_SH7757_H__ */ diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c index f25127c46ec..039e4587dd9 100644 --- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c +++ b/arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c @@ -758,12 +758,22 @@ enum { DV_DATA3_MARK, DV_DATA2_MARK, DV_DATA1_MARK, DV_DATA0_MARK, LCD_CLK_MARK, LCD_EXTCLK_MARK, LCD_VSYNC_MARK, LCD_HSYNC_MARK, LCD_DE_MARK, - LCD_DATA23_MARK, LCD_DATA22_MARK, LCD_DATA21_MARK, LCD_DATA20_MARK, - LCD_DATA19_MARK, LCD_DATA18_MARK, LCD_DATA17_MARK, LCD_DATA16_MARK, - LCD_DATA15_MARK, LCD_DATA14_MARK, LCD_DATA13_MARK, LCD_DATA12_MARK, - LCD_DATA11_MARK, LCD_DATA10_MARK, LCD_DATA9_MARK, LCD_DATA8_MARK, - LCD_DATA7_MARK, LCD_DATA6_MARK, LCD_DATA5_MARK, LCD_DATA4_MARK, - LCD_DATA3_MARK, LCD_DATA2_MARK, LCD_DATA1_MARK, LCD_DATA0_MARK, + LCD_DATA23_PG23_MARK, LCD_DATA22_PG22_MARK, LCD_DATA21_PG21_MARK, + LCD_DATA20_PG20_MARK, LCD_DATA19_PG19_MARK, LCD_DATA18_PG18_MARK, + LCD_DATA17_PG17_MARK, LCD_DATA16_PG16_MARK, LCD_DATA15_PG15_MARK, + LCD_DATA14_PG14_MARK, LCD_DATA13_PG13_MARK, LCD_DATA12_PG12_MARK, + LCD_DATA11_PG11_MARK, LCD_DATA10_PG10_MARK, LCD_DATA9_PG9_MARK, + LCD_DATA8_PG8_MARK, LCD_DATA7_PG7_MARK, LCD_DATA6_PG6_MARK, + LCD_DATA5_PG5_MARK, LCD_DATA4_PG4_MARK, LCD_DATA3_PG3_MARK, + LCD_DATA2_PG2_MARK, LCD_DATA1_PG1_MARK, LCD_DATA0_PG0_MARK, + LCD_DATA23_PJ23_MARK, LCD_DATA22_PJ22_MARK, LCD_DATA21_PJ21_MARK, + LCD_DATA20_PJ20_MARK, LCD_DATA19_PJ19_MARK, LCD_DATA18_PJ18_MARK, + LCD_DATA17_PJ17_MARK, LCD_DATA16_PJ16_MARK, LCD_DATA15_PJ15_MARK, + LCD_DATA14_PJ14_MARK, LCD_DATA13_PJ13_MARK, LCD_DATA12_PJ12_MARK, + LCD_DATA11_PJ11_MARK, LCD_DATA10_PJ10_MARK, LCD_DATA9_PJ9_MARK, + LCD_DATA8_PJ8_MARK, LCD_DATA7_PJ7_MARK, LCD_DATA6_PJ6_MARK, + LCD_DATA5_PJ5_MARK, LCD_DATA4_PJ4_MARK, LCD_DATA3_PJ3_MARK, + LCD_DATA2_PJ2_MARK, LCD_DATA1_PJ1_MARK, LCD_DATA0_PJ0_MARK, LCD_TCON6_MARK, LCD_TCON5_MARK, LCD_TCON4_MARK, LCD_TCON3_MARK, LCD_TCON2_MARK, LCD_TCON1_MARK, LCD_TCON0_MARK, LCD_M_DISP_MARK, @@ -1036,6 +1046,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PF1_DATA, PF1MD_000), PINMUX_DATA(BACK_MARK, PF1MD_001), + PINMUX_DATA(SSL10_MARK, PF1MD_011), PINMUX_DATA(TIOC4B_MARK, PF1MD_100), PINMUX_DATA(DACK0_MARK, PF1MD_101), @@ -1049,47 +1060,50 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PG27_DATA, PG27MD_00), PINMUX_DATA(LCD_TCON2_MARK, PG27MD_10), PINMUX_DATA(LCD_EXTCLK_MARK, PG27MD_11), + PINMUX_DATA(LCD_DE_MARK, PG27MD_11), PINMUX_DATA(PG26_DATA, PG26MD_00), PINMUX_DATA(LCD_TCON1_MARK, PG26MD_10), + PINMUX_DATA(LCD_HSYNC_MARK, PG26MD_10), PINMUX_DATA(PG25_DATA, PG25MD_00), PINMUX_DATA(LCD_TCON0_MARK, PG25MD_10), + PINMUX_DATA(LCD_VSYNC_MARK, PG25MD_10), PINMUX_DATA(PG24_DATA, PG24MD_00), PINMUX_DATA(LCD_CLK_MARK, PG24MD_10), PINMUX_DATA(PG23_DATA, PG23MD_000), - PINMUX_DATA(LCD_DATA23_MARK, PG23MD_010), + PINMUX_DATA(LCD_DATA23_PG23_MARK, PG23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PG23MD_011), PINMUX_DATA(TXD5_MARK, PG23MD_100), PINMUX_DATA(PG22_DATA, PG22MD_000), - PINMUX_DATA(LCD_DATA22_MARK, PG22MD_010), + PINMUX_DATA(LCD_DATA22_PG22_MARK, PG22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PG22MD_011), PINMUX_DATA(RXD5_MARK, PG22MD_100), PINMUX_DATA(PG21_DATA, PG21MD_000), PINMUX_DATA(DV_DATA7_MARK, PG21MD_001), - PINMUX_DATA(LCD_DATA21_MARK, PG21MD_010), + PINMUX_DATA(LCD_DATA21_PG21_MARK, PG21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PG21MD_011), PINMUX_DATA(TXD4_MARK, PG21MD_100), PINMUX_DATA(PG20_DATA, PG20MD_000), PINMUX_DATA(DV_DATA6_MARK, PG20MD_001), - PINMUX_DATA(LCD_DATA20_MARK, PG21MD_010), + PINMUX_DATA(LCD_DATA20_PG20_MARK, PG21MD_010), PINMUX_DATA(LCD_TCON3_MARK, PG20MD_011), PINMUX_DATA(RXD4_MARK, PG20MD_100), PINMUX_DATA(PG19_DATA, PG19MD_000), PINMUX_DATA(DV_DATA5_MARK, PG19MD_001), - PINMUX_DATA(LCD_DATA19_MARK, PG19MD_010), + PINMUX_DATA(LCD_DATA19_PG19_MARK, PG19MD_010), PINMUX_DATA(SPDIF_OUT_MARK, PG19MD_011), PINMUX_DATA(SCK5_MARK, PG19MD_100), PINMUX_DATA(PG18_DATA, PG18MD_000), PINMUX_DATA(DV_DATA4_MARK, PG18MD_001), - PINMUX_DATA(LCD_DATA18_MARK, PG18MD_010), + PINMUX_DATA(LCD_DATA18_PG18_MARK, PG18MD_010), PINMUX_DATA(SPDIF_IN_MARK, PG18MD_011), PINMUX_DATA(SCK4_MARK, PG18MD_100), @@ -1097,103 +1111,103 @@ static pinmux_enum_t pinmux_data[] = { // we're going with 2 bits PINMUX_DATA(PG17_DATA, PG17MD_00), PINMUX_DATA(WE3ICIOWRAHDQMUU_MARK, PG17MD_01), - PINMUX_DATA(LCD_DATA17_MARK, PG17MD_10), + PINMUX_DATA(LCD_DATA17_PG17_MARK, PG17MD_10), // TODO hardware manual has PG16 3 bits wide in reg picture and 2 bits in description // we're going with 2 bits PINMUX_DATA(PG16_DATA, PG16MD_00), PINMUX_DATA(WE2ICIORDDQMUL_MARK, PG16MD_01), - PINMUX_DATA(LCD_DATA16_MARK, PG16MD_10), + PINMUX_DATA(LCD_DATA16_PG16_MARK, PG16MD_10), PINMUX_DATA(PG15_DATA, PG15MD_00), PINMUX_DATA(D31_MARK, PG15MD_01), - PINMUX_DATA(LCD_DATA15_MARK, PG15MD_10), + PINMUX_DATA(LCD_DATA15_PG15_MARK, PG15MD_10), PINMUX_DATA(PINT7_PG_MARK, PG15MD_11), PINMUX_DATA(PG14_DATA, PG14MD_00), PINMUX_DATA(D30_MARK, PG14MD_01), - PINMUX_DATA(LCD_DATA14_MARK, PG14MD_10), + PINMUX_DATA(LCD_DATA14_PG14_MARK, PG14MD_10), PINMUX_DATA(PINT6_PG_MARK, PG14MD_11), PINMUX_DATA(PG13_DATA, PG13MD_00), PINMUX_DATA(D29_MARK, PG13MD_01), - PINMUX_DATA(LCD_DATA13_MARK, PG13MD_10), + PINMUX_DATA(LCD_DATA13_PG13_MARK, PG13MD_10), PINMUX_DATA(PINT5_PG_MARK, PG13MD_11), PINMUX_DATA(PG12_DATA, PG12MD_00), PINMUX_DATA(D28_MARK, PG12MD_01), - PINMUX_DATA(LCD_DATA12_MARK, PG12MD_10), + PINMUX_DATA(LCD_DATA12_PG12_MARK, PG12MD_10), PINMUX_DATA(PINT4_PG_MARK, PG12MD_11), PINMUX_DATA(PG11_DATA, PG11MD_000), PINMUX_DATA(D27_MARK, PG11MD_001), - PINMUX_DATA(LCD_DATA11_MARK, PG11MD_010), + PINMUX_DATA(LCD_DATA11_PG11_MARK, PG11MD_010), PINMUX_DATA(PINT3_PG_MARK, PG11MD_011), PINMUX_DATA(TIOC3D_MARK, PG11MD_100), PINMUX_DATA(PG10_DATA, PG10MD_000), PINMUX_DATA(D26_MARK, PG10MD_001), - PINMUX_DATA(LCD_DATA10_MARK, PG10MD_010), + PINMUX_DATA(LCD_DATA10_PG10_MARK, PG10MD_010), PINMUX_DATA(PINT2_PG_MARK, PG10MD_011), PINMUX_DATA(TIOC3C_MARK, PG10MD_100), PINMUX_DATA(PG9_DATA, PG9MD_000), PINMUX_DATA(D25_MARK, PG9MD_001), - PINMUX_DATA(LCD_DATA9_MARK, PG9MD_010), + PINMUX_DATA(LCD_DATA9_PG9_MARK, PG9MD_010), PINMUX_DATA(PINT1_PG_MARK, PG9MD_011), PINMUX_DATA(TIOC3B_MARK, PG9MD_100), PINMUX_DATA(PG8_DATA, PG8MD_000), PINMUX_DATA(D24_MARK, PG8MD_001), - PINMUX_DATA(LCD_DATA8_MARK, PG8MD_010), + PINMUX_DATA(LCD_DATA8_PG8_MARK, PG8MD_010), PINMUX_DATA(PINT0_PG_MARK, PG8MD_011), PINMUX_DATA(TIOC3A_MARK, PG8MD_100), PINMUX_DATA(PG7_DATA, PG7MD_000), PINMUX_DATA(D23_MARK, PG7MD_001), - PINMUX_DATA(LCD_DATA7_MARK, PG7MD_010), + PINMUX_DATA(LCD_DATA7_PG7_MARK, PG7MD_010), PINMUX_DATA(IRQ7_PG_MARK, PG7MD_011), PINMUX_DATA(TIOC2B_MARK, PG7MD_100), PINMUX_DATA(PG6_DATA, PG6MD_000), PINMUX_DATA(D22_MARK, PG6MD_001), - PINMUX_DATA(LCD_DATA6_MARK, PG6MD_010), + PINMUX_DATA(LCD_DATA6_PG6_MARK, PG6MD_010), PINMUX_DATA(IRQ6_PG_MARK, PG6MD_011), PINMUX_DATA(TIOC2A_MARK, PG6MD_100), PINMUX_DATA(PG5_DATA, PG5MD_000), PINMUX_DATA(D21_MARK, PG5MD_001), - PINMUX_DATA(LCD_DATA5_MARK, PG5MD_010), + PINMUX_DATA(LCD_DATA5_PG5_MARK, PG5MD_010), PINMUX_DATA(IRQ5_PG_MARK, PG5MD_011), PINMUX_DATA(TIOC1B_MARK, PG5MD_100), PINMUX_DATA(PG4_DATA, PG4MD_000), PINMUX_DATA(D20_MARK, PG4MD_001), - PINMUX_DATA(LCD_DATA4_MARK, PG4MD_010), + PINMUX_DATA(LCD_DATA4_PG4_MARK, PG4MD_010), PINMUX_DATA(IRQ4_PG_MARK, PG4MD_011), PINMUX_DATA(TIOC1A_MARK, PG4MD_100), PINMUX_DATA(PG3_DATA, PG3MD_000), PINMUX_DATA(D19_MARK, PG3MD_001), - PINMUX_DATA(LCD_DATA3_MARK, PG3MD_010), + PINMUX_DATA(LCD_DATA3_PG3_MARK, PG3MD_010), PINMUX_DATA(IRQ3_PG_MARK, PG3MD_011), PINMUX_DATA(TIOC0D_MARK, PG3MD_100), PINMUX_DATA(PG2_DATA, PG2MD_000), PINMUX_DATA(D18_MARK, PG2MD_001), - PINMUX_DATA(LCD_DATA2_MARK, PG2MD_010), + PINMUX_DATA(LCD_DATA2_PG2_MARK, PG2MD_010), PINMUX_DATA(IRQ2_PG_MARK, PG2MD_011), PINMUX_DATA(TIOC0C_MARK, PG2MD_100), PINMUX_DATA(PG1_DATA, PG1MD_000), PINMUX_DATA(D17_MARK, PG1MD_001), - PINMUX_DATA(LCD_DATA1_MARK, PG1MD_010), + PINMUX_DATA(LCD_DATA1_PG1_MARK, PG1MD_010), PINMUX_DATA(IRQ1_PG_MARK, PG1MD_011), PINMUX_DATA(TIOC0B_MARK, PG1MD_100), PINMUX_DATA(PG0_DATA, PG0MD_000), PINMUX_DATA(D16_MARK, PG0MD_001), - PINMUX_DATA(LCD_DATA0_MARK, PG0MD_010), + PINMUX_DATA(LCD_DATA0_PG0_MARK, PG0MD_010), PINMUX_DATA(IRQ0_PG_MARK, PG0MD_011), PINMUX_DATA(TIOC0A_MARK, PG0MD_100), @@ -1275,14 +1289,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ23_DATA, PJ23MD_000), PINMUX_DATA(DV_DATA23_MARK, PJ23MD_001), - PINMUX_DATA(LCD_DATA23_MARK, PJ23MD_010), + PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010), PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011), PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100), PINMUX_DATA(CTX1_MARK, PJ23MD_101), PINMUX_DATA(PJ22_DATA, PJ22MD_000), PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001), - PINMUX_DATA(LCD_DATA22_MARK, PJ22MD_010), + PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010), PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011), PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100), PINMUX_DATA(CRX1_MARK, PJ22MD_101), @@ -1290,14 +1304,14 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ21_DATA, PJ21MD_000), PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001), - PINMUX_DATA(LCD_DATA21_MARK, PJ21MD_010), + PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010), PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011), PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100), PINMUX_DATA(CTX2_MARK, PJ21MD_101), PINMUX_DATA(PJ20_DATA, PJ20MD_000), PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001), - PINMUX_DATA(LCD_DATA20_MARK, PJ20MD_010), + PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010), PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011), PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100), PINMUX_DATA(CRX2_MARK, PJ20MD_101), @@ -1305,7 +1319,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ19_DATA, PJ19MD_000), PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001), - PINMUX_DATA(LCD_DATA19_MARK, PJ19MD_010), + PINMUX_DATA(LCD_DATA19_PJ19_MARK, PJ19MD_010), PINMUX_DATA(MISO0_PJ19_MARK, PJ19MD_011), PINMUX_DATA(TIOC0D_MARK, PJ19MD_100), PINMUX_DATA(SIOFRXD_MARK, PJ19MD_101), @@ -1313,126 +1327,126 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PJ18_DATA, PJ18MD_000), PINMUX_DATA(DV_DATA18_MARK, PJ18MD_001), - PINMUX_DATA(LCD_DATA18_MARK, PJ18MD_010), + PINMUX_DATA(LCD_DATA18_PJ18_MARK, PJ18MD_010), PINMUX_DATA(MOSI0_PJ18_MARK, PJ18MD_011), PINMUX_DATA(TIOC0C_MARK, PJ18MD_100), PINMUX_DATA(SIOFTXD_MARK, PJ18MD_101), PINMUX_DATA(PJ17_DATA, PJ17MD_000), PINMUX_DATA(DV_DATA17_MARK, PJ17MD_001), - PINMUX_DATA(LCD_DATA17_MARK, PJ17MD_010), + PINMUX_DATA(LCD_DATA17_PJ17_MARK, PJ17MD_010), PINMUX_DATA(SSL00_PJ17_MARK, PJ17MD_011), PINMUX_DATA(TIOC0B_MARK, PJ17MD_100), PINMUX_DATA(SIOFSYNC_MARK, PJ17MD_101), PINMUX_DATA(PJ16_DATA, PJ16MD_000), PINMUX_DATA(DV_DATA16_MARK, PJ16MD_001), - PINMUX_DATA(LCD_DATA16_MARK, PJ16MD_010), + PINMUX_DATA(LCD_DATA16_PJ16_MARK, PJ16MD_010), PINMUX_DATA(RSPCK0_PJ16_MARK, PJ16MD_011), PINMUX_DATA(TIOC0A_MARK, PJ16MD_100), PINMUX_DATA(SIOFSCK_MARK, PJ16MD_101), PINMUX_DATA(PJ15_DATA, PJ15MD_000), PINMUX_DATA(DV_DATA15_MARK, PJ15MD_001), - PINMUX_DATA(LCD_DATA15_MARK, PJ15MD_010), + PINMUX_DATA(LCD_DATA15_PJ15_MARK, PJ15MD_010), PINMUX_DATA(PINT7_PJ_MARK, PJ15MD_011), PINMUX_DATA(PWM2H_MARK, PJ15MD_100), PINMUX_DATA(TXD7_MARK, PJ15MD_101), PINMUX_DATA(PJ14_DATA, PJ14MD_000), PINMUX_DATA(DV_DATA14_MARK, PJ14MD_001), - PINMUX_DATA(LCD_DATA14_MARK, PJ14MD_010), + PINMUX_DATA(LCD_DATA14_PJ14_MARK, PJ14MD_010), PINMUX_DATA(PINT6_PJ_MARK, PJ14MD_011), PINMUX_DATA(PWM2G_MARK, PJ14MD_100), PINMUX_DATA(TXD6_MARK, PJ14MD_101), PINMUX_DATA(PJ13_DATA, PJ13MD_000), PINMUX_DATA(DV_DATA13_MARK, PJ13MD_001), - PINMUX_DATA(LCD_DATA13_MARK, PJ13MD_010), + PINMUX_DATA(LCD_DATA13_PJ13_MARK, PJ13MD_010), PINMUX_DATA(PINT5_PJ_MARK, PJ13MD_011), PINMUX_DATA(PWM2F_MARK, PJ13MD_100), PINMUX_DATA(TXD5_MARK, PJ13MD_101), PINMUX_DATA(PJ12_DATA, PJ12MD_000), PINMUX_DATA(DV_DATA12_MARK, PJ12MD_001), - PINMUX_DATA(LCD_DATA12_MARK, PJ12MD_010), + PINMUX_DATA(LCD_DATA12_PJ12_MARK, PJ12MD_010), PINMUX_DATA(PINT4_PJ_MARK, PJ12MD_011), PINMUX_DATA(PWM2E_MARK, PJ12MD_100), PINMUX_DATA(SCK7_MARK, PJ12MD_101), PINMUX_DATA(PJ11_DATA, PJ11MD_000), PINMUX_DATA(DV_DATA11_MARK, PJ11MD_001), - PINMUX_DATA(LCD_DATA11_MARK, PJ11MD_010), + PINMUX_DATA(LCD_DATA11_PJ11_MARK, PJ11MD_010), PINMUX_DATA(PINT3_PJ_MARK, PJ11MD_011), PINMUX_DATA(PWM2D_MARK, PJ11MD_100), PINMUX_DATA(SCK6_MARK, PJ11MD_101), PINMUX_DATA(PJ10_DATA, PJ10MD_000), PINMUX_DATA(DV_DATA10_MARK, PJ10MD_001), - PINMUX_DATA(LCD_DATA10_MARK, PJ10MD_010), + PINMUX_DATA(LCD_DATA10_PJ10_MARK, PJ10MD_010), PINMUX_DATA(PINT2_PJ_MARK, PJ10MD_011), PINMUX_DATA(PWM2C_MARK, PJ10MD_100), PINMUX_DATA(SCK5_MARK, PJ10MD_101), PINMUX_DATA(PJ9_DATA, PJ9MD_000), PINMUX_DATA(DV_DATA9_MARK, PJ9MD_001), - PINMUX_DATA(LCD_DATA9_MARK, PJ9MD_010), + PINMUX_DATA(LCD_DATA9_PJ9_MARK, PJ9MD_010), PINMUX_DATA(PINT1_PJ_MARK, PJ9MD_011), PINMUX_DATA(PWM2B_MARK, PJ9MD_100), PINMUX_DATA(RTS5_MARK, PJ9MD_101), PINMUX_DATA(PJ8_DATA, PJ8MD_000), PINMUX_DATA(DV_DATA8_MARK, PJ8MD_001), - PINMUX_DATA(LCD_DATA8_MARK, PJ8MD_010), + PINMUX_DATA(LCD_DATA8_PJ8_MARK, PJ8MD_010), PINMUX_DATA(PINT0_PJ_MARK, PJ8MD_011), PINMUX_DATA(PWM2A_MARK, PJ8MD_100), PINMUX_DATA(CTS5_MARK, PJ8MD_101), PINMUX_DATA(PJ7_DATA, PJ7MD_000), PINMUX_DATA(DV_DATA7_MARK, PJ7MD_001), - PINMUX_DATA(LCD_DATA7_MARK, PJ7MD_010), + PINMUX_DATA(LCD_DATA7_PJ7_MARK, PJ7MD_010), PINMUX_DATA(SD_D2_MARK, PJ7MD_011), PINMUX_DATA(PWM1H_MARK, PJ7MD_100), PINMUX_DATA(PJ6_DATA, PJ6MD_000), PINMUX_DATA(DV_DATA6_MARK, PJ6MD_001), - PINMUX_DATA(LCD_DATA6_MARK, PJ6MD_010), + PINMUX_DATA(LCD_DATA6_PJ6_MARK, PJ6MD_010), PINMUX_DATA(SD_D3_MARK, PJ6MD_011), PINMUX_DATA(PWM1G_MARK, PJ6MD_100), PINMUX_DATA(PJ5_DATA, PJ5MD_000), PINMUX_DATA(DV_DATA5_MARK, PJ5MD_001), - PINMUX_DATA(LCD_DATA5_MARK, PJ5MD_010), + PINMUX_DATA(LCD_DATA5_PJ5_MARK, PJ5MD_010), PINMUX_DATA(SD_CMD_MARK, PJ5MD_011), PINMUX_DATA(PWM1F_MARK, PJ5MD_100), PINMUX_DATA(PJ4_DATA, PJ4MD_000), PINMUX_DATA(DV_DATA4_MARK, PJ4MD_001), - PINMUX_DATA(LCD_DATA4_MARK, PJ4MD_010), + PINMUX_DATA(LCD_DATA4_PJ4_MARK, PJ4MD_010), PINMUX_DATA(SD_CLK_MARK, PJ4MD_011), PINMUX_DATA(PWM1E_MARK, PJ4MD_100), PINMUX_DATA(PJ3_DATA, PJ3MD_000), PINMUX_DATA(DV_DATA3_MARK, PJ3MD_001), - PINMUX_DATA(LCD_DATA3_MARK, PJ3MD_010), + PINMUX_DATA(LCD_DATA3_PJ3_MARK, PJ3MD_010), PINMUX_DATA(SD_D0_MARK, PJ3MD_011), PINMUX_DATA(PWM1D_MARK, PJ3MD_100), PINMUX_DATA(PJ2_DATA, PJ2MD_000), PINMUX_DATA(DV_DATA2_MARK, PJ2MD_001), - PINMUX_DATA(LCD_DATA2_MARK, PJ2MD_010), + PINMUX_DATA(LCD_DATA2_PJ2_MARK, PJ2MD_010), PINMUX_DATA(SD_D1_MARK, PJ2MD_011), PINMUX_DATA(PWM1C_MARK, PJ2MD_100), PINMUX_DATA(PJ1_DATA, PJ1MD_000), PINMUX_DATA(DV_DATA1_MARK, PJ1MD_001), - PINMUX_DATA(LCD_DATA1_MARK, PJ1MD_010), + PINMUX_DATA(LCD_DATA1_PJ1_MARK, PJ1MD_010), PINMUX_DATA(SD_WP_MARK, PJ1MD_011), PINMUX_DATA(PWM1B_MARK, PJ1MD_100), PINMUX_DATA(PJ0_DATA, PJ0MD_000), PINMUX_DATA(DV_DATA0_MARK, PJ0MD_001), - PINMUX_DATA(LCD_DATA0_MARK, PJ0MD_010), + PINMUX_DATA(LCD_DATA0_PJ0_MARK, PJ0MD_010), PINMUX_DATA(SD_CD_MARK, PJ0MD_011), PINMUX_DATA(PWM1A_MARK, PJ0MD_100), }; @@ -1877,30 +1891,55 @@ static struct pinmux_gpio pinmux_gpios[] = { PINMUX_GPIO(GPIO_FN_LCD_HSYNC, LCD_HSYNC_MARK), PINMUX_GPIO(GPIO_FN_LCD_DE, LCD_DE_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA23, LCD_DATA23_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA22, LCD_DATA22_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA21, LCD_DATA21_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA20, LCD_DATA20_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA19, LCD_DATA19_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA18, LCD_DATA18_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA17, LCD_DATA17_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA16, LCD_DATA16_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA15, LCD_DATA15_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA14, LCD_DATA14_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA13, LCD_DATA13_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA12, LCD_DATA12_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA11, LCD_DATA11_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA10, LCD_DATA10_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA9, LCD_DATA9_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA8, LCD_DATA8_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA7, LCD_DATA7_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA6, LCD_DATA6_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA5, LCD_DATA5_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA4, LCD_DATA4_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA3, LCD_DATA3_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA2, LCD_DATA2_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA1, LCD_DATA1_MARK), - PINMUX_GPIO(GPIO_FN_LCD_DATA0, LCD_DATA0_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA23_PG23, LCD_DATA23_PG23_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA22_PG22, LCD_DATA22_PG22_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA21_PG21, LCD_DATA21_PG21_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA20_PG20, LCD_DATA20_PG20_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA19_PG19, LCD_DATA19_PG19_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA18_PG18, LCD_DATA18_PG18_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA17_PG17, LCD_DATA17_PG17_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA16_PG16, LCD_DATA16_PG16_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA15_PG15, LCD_DATA15_PG15_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA14_PG14, LCD_DATA14_PG14_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA13_PG13, LCD_DATA13_PG13_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA12_PG12, LCD_DATA12_PG12_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA11_PG11, LCD_DATA11_PG11_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA10_PG10, LCD_DATA10_PG10_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA9_PG9, LCD_DATA9_PG9_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA8_PG8, LCD_DATA8_PG8_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA7_PG7, LCD_DATA7_PG7_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA6_PG6, LCD_DATA6_PG6_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA5_PG5, LCD_DATA5_PG5_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA4_PG4, LCD_DATA4_PG4_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA3_PG3, LCD_DATA3_PG3_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA2_PG2, LCD_DATA2_PG2_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA1_PG1, LCD_DATA1_PG1_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA0_PG0, LCD_DATA0_PG0_MARK), + + PINMUX_GPIO(GPIO_FN_LCD_DATA23_PJ23, LCD_DATA23_PJ23_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA22_PJ22, LCD_DATA22_PJ22_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA21_PJ21, LCD_DATA21_PJ21_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA20_PJ20, LCD_DATA20_PJ20_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA19_PJ19, LCD_DATA19_PJ19_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA18_PJ18, LCD_DATA18_PJ18_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA17_PJ17, LCD_DATA17_PJ17_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA16_PJ16, LCD_DATA16_PJ16_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA15_PJ15, LCD_DATA15_PJ15_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA14_PJ14, LCD_DATA14_PJ14_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA13_PJ13, LCD_DATA13_PJ13_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA12_PJ12, LCD_DATA12_PJ12_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA11_PJ11, LCD_DATA11_PJ11_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA10_PJ10, LCD_DATA10_PJ10_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA9_PJ9, LCD_DATA9_PJ9_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA8_PJ8, LCD_DATA8_PJ8_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA7_PJ7, LCD_DATA7_PJ7_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA6_PJ6, LCD_DATA6_PJ6_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA5_PJ5, LCD_DATA5_PJ5_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA4_PJ4, LCD_DATA4_PJ4_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA3_PJ3, LCD_DATA3_PJ3_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA2_PJ2, LCD_DATA2_PJ2_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA1_PJ1, LCD_DATA1_PJ1_MARK), + PINMUX_GPIO(GPIO_FN_LCD_DATA0_PJ0, LCD_DATA0_PJ0_MARK), PINMUX_GPIO(GPIO_FN_LCD_M_DISP, LCD_M_DISP_MARK), }; diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index c87e78f7323..5f30f805d2f 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -334,8 +334,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]), CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]), CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]), - CLKDEV_CON_ID("usb1", &mstp_clks[HWBLK_USB1]), - CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB0]), + CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[HWBLK_USB1]), + CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[HWBLK_USB0]), CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]), diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 65786c7f5de..6a868b091c2 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -12,6 +12,7 @@ #include <linux/platform_device.h> #include <linux/serial.h> #include <linux/serial_sci.h> +#include <linux/sh_dma.h> #include <linux/sh_timer.h> #include <linux/sh_intc.h> #include <linux/uio_driver.h> diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index a7708425afa..4a2f357f4df 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -216,6 +216,20 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, + { + .slave_id = SHDMA_SLAVE_RSPI_TX, + .addr = 0xfe480004, + .chcr = SM_INC | 0x800 | 0x40000000 | + TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc1, + }, + { + .slave_id = SHDMA_SLAVE_RSPI_RX, + .addr = 0xfe480004, + .chcr = DM_INC | 0x800 | 0x40000000 | + TS_INDEX2VAL(XMIT_SZ_16BIT), + .mid_rid = 0xc2, + }, }; static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 7b57bf1dc85..ebe7a7d9721 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -273,7 +273,7 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; bss_resource.start = virt_to_phys(__bss_start); - bss_resource.end = virt_to_phys(_ebss)-1; + bss_resource.end = virt_to_phys(__bss_stop)-1; #ifdef CONFIG_CMDLINE_OVERWRITE strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line)); diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 3896f26efa4..2a0a596ebf6 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -19,7 +19,6 @@ EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(_ebss); EXPORT_SYMBOL(empty_zero_page); #define DECLARE_EXPORT(name) \ diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index c98905f71e2..db88cbf9eaf 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -78,7 +78,6 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_end = .; BSS_SECTION(0, PAGE_SIZE, 4) - _ebss = .; /* uClinux MTD sucks */ _end = . ; STABS_DEBUG diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S index 84a57761f17..60164e65d66 100644 --- a/arch/sh/lib/mcount.S +++ b/arch/sh/lib/mcount.S @@ -39,7 +39,7 @@ * * Make sure the stack pointer contains a valid address. Valid * addresses for kernel stacks are anywhere after the bss - * (after _ebss) and anywhere in init_thread_union (init_stack). + * (after __bss_stop) and anywhere in init_thread_union (init_stack). */ #define STACK_CHECK() \ mov #(THREAD_SIZE >> 10), r0; \ @@ -60,7 +60,7 @@ cmp/hi r2, r1; \ bf stack_panic; \ \ - /* If sp > _ebss then we're OK. */ \ + /* If sp > __bss_stop then we're OK. */ \ mov.l .L_ebss, r1; \ cmp/hi r1, r15; \ bt 1f; \ @@ -70,7 +70,7 @@ cmp/hs r1, r15; \ bf stack_panic; \ \ - /* If sp > init_stack && sp < _ebss, not OK. */ \ + /* If sp > init_stack && sp < __bss_stop, not OK. */ \ add r0, r1; \ cmp/hs r1, r15; \ bt stack_panic; \ @@ -292,8 +292,6 @@ stack_panic: nop .align 2 -.L_ebss: - .long _ebss .L_init_thread_union: .long init_thread_union .Lpanic: diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 1fc25d85e51..3bdc1ad9a34 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -58,11 +58,15 @@ static void show_pte(struct mm_struct *mm, unsigned long addr) { pgd_t *pgd; - if (mm) + if (mm) { pgd = mm->pgd; - else + } else { pgd = get_TTB(); + if (unlikely(!pgd)) + pgd = swapper_pg_dir; + } + printk(KERN_ALERT "pgd = %p\n", pgd); pgd += pgd_index(addr); printk(KERN_ALERT "[%08lx] *pgd=%0*Lx", addr, |