diff options
Diffstat (limited to 'arch/sh')
25 files changed, 189 insertions, 1081 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index f6a0c443616..6a461d4caef 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -45,6 +45,9 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_IOMAP bool +config GENERIC_TIME + def_bool n + config ARCH_MAY_HAVE_PC_FDC bool @@ -357,6 +360,7 @@ config CPU_HAS_SR_RB endmenu menu "Timer support" +depends on !GENERIC_TIME config SH_TMU bool "TMU timer support" diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c index 75f91aaae07..219179114f0 100644 --- a/arch/sh/boards/hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/hp6xx/hp6xx_apm.c @@ -83,7 +83,7 @@ static int hp6x0_apm_get_info(char *buf, char **start, off_t fpos, int length) return p - buf; } -static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev, struct pt_regs *regs) +static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev) { if (!apm_suspended) apm_queue_event(APM_USER_SUSPEND); @@ -96,7 +96,7 @@ static int __init hp6x0_apm_init(void) int ret; ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, - SA_INTERRUPT, MODNAME, 0); + IRQF_DISABLED, MODNAME, 0); if (unlikely(ret < 0)) { printk(KERN_ERR MODNAME ": IRQ %d request failed\n", HP680_BTN_IRQ); diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c index 0b7bee1a9ca..e6252497816 100644 --- a/arch/sh/boards/landisk/landisk_pwb.c +++ b/arch/sh/boards/landisk/landisk_pwb.c @@ -135,7 +135,7 @@ static int swdrv_write(struct file *filp, const char *buff, size_t count, return count; } -static irqreturn_t sw_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t sw_interrupt(int irq, void *dev_id) { landisk_btn = (0x0ff & (~ctrl_inb(PA_STATUS))); disable_irq(IRQ_BUTTON); diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 01c10fa5c05..7c3d1d30415 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -69,7 +69,6 @@ static void __init pci_write_config(unsigned long busNo, static unsigned char m_irq_mask = 0xfb; static unsigned char s_irq_mask = 0xff; -volatile unsigned long irq_err_count; static void disable_mpc1211_irq(unsigned int irq) { @@ -118,7 +117,7 @@ static void mask_and_ack_mpc1211(unsigned int irq) if(irq < 8) { if(m_irq_mask & (1<<irq)){ if(!mpc1211_irq_real(irq)){ - irq_err_count++; + atomic_inc(&irq_err_count) printk("spurious 8259A interrupt: IRQ %x\n",irq); } } else { @@ -131,7 +130,7 @@ static void mask_and_ack_mpc1211(unsigned int irq) } else { if(s_irq_mask & (1<<(irq - 8))){ if(!mpc1211_irq_real(irq)){ - irq_err_count++; + atomic_inc(&irq_err_count); printk("spurious 8259A interrupt: IRQ %x\n",irq); } } else { diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c index 2d960e9a314..b544772cbc7 100644 --- a/arch/sh/boards/renesas/r7780rp/irq.c +++ b/arch/sh/boards/renesas/r7780rp/irq.c @@ -1,18 +1,16 @@ /* - * linux/arch/sh/boards/renesas/r7780rp/irq.c - * - * Copyright (C) 2000 Kazumoto Kojima - * * Renesas Solutions Highlander R7780RP-1 Support. * - * Modified for R7780RP-1 by - * Atom Create Engineering Co., Ltd. 2002. + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include <linux/init.h> #include <linux/irq.h> #include <asm/io.h> -#include <asm/irq.h> -#include <asm/r7780rp/r7780rp.h> #ifdef CONFIG_SH_R7780MP static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0}; @@ -20,71 +18,26 @@ static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0}; static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0}; #endif -static void enable_r7780rp_irq(unsigned int irq); -static void disable_r7780rp_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_r7780rp_irq disable_r7780rp_irq - -static void ack_r7780rp_irq(unsigned int irq); -static void end_r7780rp_irq(unsigned int irq); - -static unsigned int startup_r7780rp_irq(unsigned int irq) -{ - enable_r7780rp_irq(irq); - return 0; /* never anything pending */ -} - -static void disable_r7780rp_irq(unsigned int irq) -{ - unsigned short val; - unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); - - /* Set the priority in IPR to 0 */ - val = ctrl_inw(IRLCNTR1); - val &= mask; - ctrl_outw(val, IRLCNTR1); -} - static void enable_r7780rp_irq(unsigned int irq) { - unsigned short val; - unsigned short value = (0x0001 << mask_pos[irq]); - /* Set priority in IPR back to original value */ - val = ctrl_inw(IRLCNTR1); - val |= value; - ctrl_outw(val, IRLCNTR1); -} - -static void ack_r7780rp_irq(unsigned int irq) -{ - disable_r7780rp_irq(irq); + ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); } -static void end_r7780rp_irq(unsigned int irq) +static void disable_r7780rp_irq(unsigned int irq) { - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_r7780rp_irq(irq); + /* Set the priority in IPR to 0 */ + ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), + IRLCNTR1); } -static struct hw_interrupt_type r7780rp_irq_type = { - .typename = "R7780RP-IRQ", - .startup = startup_r7780rp_irq, - .shutdown = shutdown_r7780rp_irq, - .enable = enable_r7780rp_irq, - .disable = disable_r7780rp_irq, - .ack = ack_r7780rp_irq, - .end = end_r7780rp_irq, +static struct irq_chip r7780rp_irq_chip __read_mostly = { + .name = "r7780rp", + .mask = disable_r7780rp_irq, + .unmask = enable_r7780rp_irq, + .mask_ack = disable_r7780rp_irq, }; -static void make_r7780rp_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &r7780rp_irq_type; - disable_r7780rp_irq(irq); -} - /* * Initialize IRQ setting */ @@ -92,24 +45,10 @@ void __init init_r7780rp_IRQ(void) { int i; - /* IRL0=PCI Slot #A - * IRL1=PCI Slot #B - * IRL2=PCI Slot #C - * IRL3=PCI Slot #D - * IRL4=CF Card - * IRL5=CF Card Insert - * IRL6=M66596 - * IRL7=SD Card - * IRL8=Touch Panel - * IRL9=SCI - * IRL10=Serial - * IRL11=Extention #A - * IRL11=Extention #B - * IRL12=Debug LAN - * IRL13=Push Switch - * IRL14=ZiggBee IO - */ - - for (i=0; i<15; i++) - make_r7780rp_irq(i); + for (i = 0; i < 15; i++) { + disable_irq_nosync(i); + set_irq_chip_and_handler(i, &r7780rp_irq_chip, + handle_level_irq); + enable_r7780rp_irq(i); + } } diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index f5e98c56b53..540d0bf1644 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -33,7 +33,7 @@ extern void pcibios_init(void); * EraseConfig handling functions */ -static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000; diff --git a/arch/sh/cchips/hd6446x/hd64461/setup.c b/arch/sh/cchips/hd6446x/hd64461/setup.c index 38f1e8171a3..4d49b5cbcc1 100644 --- a/arch/sh/cchips/hd6446x/hd64461/setup.c +++ b/arch/sh/cchips/hd6446x/hd64461/setup.c @@ -71,7 +71,7 @@ static struct hw_interrupt_type hd64461_irq_type = { .end = end_hd64461_irq, }; -static irqreturn_t hd64461_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t hd64461_interrupt(int irq, void *dev_id) { printk(KERN_INFO "HD64461: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", diff --git a/arch/sh/cchips/hd6446x/hd64465/gpio.c b/arch/sh/cchips/hd6446x/hd64465/gpio.c index 72320d02d69..43431855ec8 100644 --- a/arch/sh/cchips/hd6446x/hd64465/gpio.c +++ b/arch/sh/cchips/hd6446x/hd64465/gpio.c @@ -85,7 +85,7 @@ static struct { void *dev; } handlers[GPIO_NPORTS * 8]; -static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev, struct pt_regs *regs) +static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev) { unsigned short port, pin, isr, mask, portpin; diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c index 30573d3e196..d126e1f30de 100644 --- a/arch/sh/cchips/hd6446x/hd64465/setup.c +++ b/arch/sh/cchips/hd6446x/hd64465/setup.c @@ -84,7 +84,7 @@ static struct hw_interrupt_type hd64465_irq_type = { }; -static irqreturn_t hd64465_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t hd64465_interrupt(int irq, void *dev_id) { printk(KERN_INFO "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index 392c8b12ce3..bf1b28feca0 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -88,8 +88,7 @@ static struct hw_interrupt_type voyagergx_irq_type = { .end = end_voyagergx_irq, }; -static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t voyagergx_interrupt(int irq, void *dev_id) { printk(KERN_INFO "VoyagerGX: spurious interrupt, status: 0x%x\n", diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c index 9cb07092418..0caf11bb7e2 100644 --- a/arch/sh/drivers/dma/dma-g2.c +++ b/arch/sh/drivers/dma/dma-g2.c @@ -51,7 +51,7 @@ static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa0 ((g2_dma->channel[i].size - \ g2_dma->status[i].size) & 0x0fffffff) -static irqreturn_t g2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t g2_dma_interrupt(int irq, void *dev_id) { int i; diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index c1b6bc23c10..838fad566ea 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -21,7 +21,7 @@ static unsigned int xfer_complete; static int count; -static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id) { if (get_dma_residue(PVR2_CASCADE_CHAN)) { printk(KERN_WARNING "DMA: SH DMAC did not complete transfer " diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index cbbe8bce3d6..d8ece20bb2c 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -60,9 +60,9 @@ static inline unsigned int calc_xmit_shift(struct dma_channel *chan) * Besides that it needs to waken any waiting process, which should handle * setting up the next transfer. */ -static irqreturn_t dma_tei(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t dma_tei(int irq, void *dev_id) { - struct dma_channel *chan = (struct dma_channel *)dev_id; + struct dma_channel *chan = dev_id; u32 chcr; chcr = ctrl_inl(CHCR[chan->chan]); @@ -228,7 +228,7 @@ static inline int dmaor_reset(void) } #if defined(CONFIG_CPU_SH4) -static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t dma_err(int irq, void *dummy) { dmaor_reset(); disable_irq(irq); diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index dbe83788498..85e1ee2e2e7 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -155,7 +155,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) */ pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO, (64 << 10), - SH4_PCI_IO_BASE + PCIBIOS_MIN_IO); + SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO); /* * XXX: For now, leave this board-specific. In the event we have other @@ -163,7 +163,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) */ #ifdef CONFIG_SH_BIGSUR bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10), - SH4_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); + SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); #endif /* Make sure the MSB's of IO window are set to access PCI space diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c index 4ab5ea6b35f..efecb3d5995 100644 --- a/arch/sh/drivers/pci/pci-st40.c +++ b/arch/sh/drivers/pci/pci-st40.c @@ -161,7 +161,7 @@ static char * pci_commands[16]={ "Memory Write-and-Invalidate" }; -static irqreturn_t st40_pci_irq(int irq, void *dev_instance, struct pt_regs *regs) +static irqreturn_t st40_pci_irq(int irq, void *dev_instance) { unsigned pci_int, pci_air, pci_cir, pci_aint; static int count=0; diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c index e30e4b7aa70..d4b2bb7e08c 100644 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -10,93 +10,32 @@ * These are the "new Hitachi style" interrupts, as present on the * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780. */ - #include <linux/kernel.h> #include <linux/init.h> #include <linux/irq.h> #include <asm/system.h> #include <asm/io.h> -#include <asm/machvec.h> - -struct intc2_data { - unsigned char msk_offset; - unsigned char msk_shift; - - int (*clear_irq) (int); -}; - -static struct intc2_data intc2_data[NR_INTC2_IRQS]; - -static void enable_intc2_irq(unsigned int irq); -static void disable_intc2_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_intc2_irq disable_intc2_irq - -static void mask_and_ack_intc2(unsigned int); -static void end_intc2_irq(unsigned int irq); - -static unsigned int startup_intc2_irq(unsigned int irq) -{ - enable_intc2_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type intc2_irq_type = { - .typename = "INTC2-IRQ", - .startup = startup_intc2_irq, - .shutdown = shutdown_intc2_irq, - .enable = enable_intc2_irq, - .disable = disable_intc2_irq, - .ack = mask_and_ack_intc2, - .end = end_intc2_irq -}; static void disable_intc2_irq(unsigned int irq) { - int irq_offset = irq - INTC2_FIRST_IRQ; - int msk_shift, msk_offset; - - /* Sanity check */ - if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) - return; - - msk_shift = intc2_data[irq_offset].msk_shift; - msk_offset = intc2_data[irq_offset].msk_offset; - - ctrl_outl(1 << msk_shift, - INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset); + struct intc2_data *p = get_irq_chip_data(irq); + ctrl_outl(1 << p->msk_shift, + INTC2_BASE + INTC2_INTMSK_OFFSET + p->msk_offset); } static void enable_intc2_irq(unsigned int irq) { - int irq_offset = irq - INTC2_FIRST_IRQ; - int msk_shift, msk_offset; - - /* Sanity check */ - if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) - return; - - msk_shift = intc2_data[irq_offset].msk_shift; - msk_offset = intc2_data[irq_offset].msk_offset; - - ctrl_outl(1 << msk_shift, - INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset); -} - -static void mask_and_ack_intc2(unsigned int irq) -{ - disable_intc2_irq(irq); + struct intc2_data *p = get_irq_chip_data(irq); + ctrl_outl(1 << p->msk_shift, + INTC2_BASE + INTC2_INTMSKCLR_OFFSET + p->msk_offset); } -static void end_intc2_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_intc2_irq(irq); - - if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq)) - intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq); -} +static struct irq_chip intc2_irq_chip = { + .typename = "intc2", + .mask = disable_intc2_irq, + .unmask = enable_intc2_irq, + .mask_ack = disable_intc2_irq, +}; /* * Setup an INTC2 style interrupt. @@ -108,46 +47,30 @@ static void end_intc2_irq(unsigned int irq) * | | | | * make_intc2_irq(84, 0, 16, 0, 13); */ -void make_intc2_irq(unsigned int irq, - unsigned int ipr_offset, unsigned int ipr_shift, - unsigned int msk_offset, unsigned int msk_shift, - unsigned int priority) +void make_intc2_irq(struct intc2_data *p) { - int irq_offset = irq - INTC2_FIRST_IRQ; unsigned int flags; unsigned long ipr; - if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) - return; - - disable_irq_nosync(irq); - - /* Fill the data we need */ - intc2_data[irq_offset].msk_offset = msk_offset; - intc2_data[irq_offset].msk_shift = msk_shift; - intc2_data[irq_offset].clear_irq = NULL; + disable_irq_nosync(p->irq); /* Set the priority level */ local_irq_save(flags); - ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset); - ipr &= ~(0xf << ipr_shift); - ipr |= priority << ipr_shift; - ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset); + ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + p->ipr_offset); + ipr &= ~(0xf << p->ipr_shift); + ipr |= p->priority << p->ipr_shift; + ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + p->ipr_offset); local_irq_restore(flags); - irq_desc[irq].chip = &intc2_irq_type; + set_irq_chip_and_handler(p->irq, &intc2_irq_chip, handle_level_irq); + set_irq_chip_data(p->irq, p); - disable_intc2_irq(irq); + enable_intc2_irq(p->irq); } -static struct intc2_init { - unsigned short irq; - unsigned char ipr_offset, ipr_shift; - unsigned char msk_offset, msk_shift; - unsigned char priority; -} intc2_init_data[] __initdata = { +static struct intc2_data intc2_irq_table[] = { #if defined(CONFIG_CPU_SUBTYPE_ST40) {64, 0, 0, 0, 0, 13}, /* PCI serr */ {65, 0, 4, 0, 1, 13}, /* PCI err */ @@ -266,19 +189,6 @@ void __init init_IRQ_intc2(void) { int i; - for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) { - struct intc2_init *p = intc2_init_data + i; - make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift, - p-> msk_offset, p->msk_shift, p->priority); - } -} - -/* Adds a termination callback to the interrupt */ -void intc2_add_clear_irq(int irq, int (*fn)(int)) -{ - if (unlikely(irq < INTC2_FIRST_IRQ)) - return; - - intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn; + for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) + make_intc2_irq(intc2_irq_table + i); } - diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index f785822cd5d..8944abdf6e1 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -1,11 +1,10 @@ /* - * arch/sh/kernel/cpu/irq/ipr.c + * Interrupt handling for IPR-based IRQ. * * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi * Copyright (C) 2000 Kazumoto Kojima - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * - * Interrupt handling for IPR-based IRQ. + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * Copyright (C) 2006 Paul Mundt * * Supported system: * On-chip supporting modules (TMU, RTC, etc.). @@ -13,12 +12,13 @@ * Hitachi SolutionEngine external I/O: * MS7709SE01, MS7709ASE01, and MS7750SE01 * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include <linux/init.h> #include <linux/irq.h> #include <linux/module.h> - #include <asm/system.h> #include <asm/io.h> #include <asm/machvec.h> @@ -28,93 +28,45 @@ struct ipr_data { int shift; /* Shifts of the 16-bit data */ int priority; /* The priority */ }; -static struct ipr_data ipr_data[NR_IRQS]; - -static void enable_ipr_irq(unsigned int irq); -static void disable_ipr_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_ipr_irq disable_ipr_irq - -static void mask_and_ack_ipr(unsigned int); -static void end_ipr_irq(unsigned int irq); - -static unsigned int startup_ipr_irq(unsigned int irq) -{ - enable_ipr_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type ipr_irq_type = { - .typename = "IPR-IRQ", - .startup = startup_ipr_irq, - .shutdown = shutdown_ipr_irq, - .enable = enable_ipr_irq, - .disable = disable_ipr_irq, - .ack = mask_and_ack_ipr, - .end = end_ipr_irq -}; static void disable_ipr_irq(unsigned int irq) { - unsigned long val; - unsigned int addr = ipr_data[irq].addr; - unsigned short mask = 0xffff ^ (0x0f << ipr_data[irq].shift); - + struct ipr_data *p = get_irq_chip_data(irq); /* Set the priority in IPR to 0 */ - val = ctrl_inw(addr); - val &= mask; - ctrl_outw(val, addr); + ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); } static void enable_ipr_irq(unsigned int irq) { - unsigned long val; - unsigned int addr = ipr_data[irq].addr; - int priority = ipr_data[irq].priority; - unsigned short value = (priority << ipr_data[irq].shift); - + struct ipr_data *p = get_irq_chip_data(irq); /* Set priority in IPR back to original value */ - val = ctrl_inw(addr); - val |= value; - ctrl_outw(val, addr); + ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); } -static void mask_and_ack_ipr(unsigned int irq) -{ - disable_ipr_irq(irq); - -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) - /* This is needed when we use edge triggered setting */ - /* XXX: Is it really needed? */ - if (IRQ0_IRQ <= irq && irq <= IRQ5_IRQ) { - /* Clear external interrupt request */ - int a = ctrl_inb(INTC_IRR0); - a &= ~(1 << (irq - IRQ0_IRQ)); - ctrl_outb(a, INTC_IRR0); - } -#endif -} - -static void end_ipr_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_ipr_irq(irq); -} +static struct irq_chip ipr_irq_chip = { + .name = "ipr", + .mask = disable_ipr_irq, + .unmask = enable_ipr_irq, + .mask_ack = disable_ipr_irq, +}; void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority) { + struct ipr_data ipr_data; + disable_irq_nosync(irq); - ipr_data[irq].addr = addr; - ipr_data[irq].shift = pos*4; /* POSition (0-3) x 4 means shift */ - ipr_data[irq].priority = priority; - irq_desc[irq].chip = &ipr_irq_type; - disable_ipr_irq(irq); + ipr_data.addr = addr; + ipr_data.shift = pos*4; /* POSition (0-3) x 4 means shift */ + ipr_data.priority = priority; + + set_irq_chip_and_handler(irq, &ipr_irq_chip, handle_level_irq); + set_irq_chip_data(irq, &ipr_data); + + enable_ipr_irq(irq); } +/* XXX: This needs to die a horrible death.. */ void __init init_IRQ(void) { #ifndef CONFIG_CPU_SUBTYPE_SH7780 diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index 44daf44833f..6be46f0686b 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -49,198 +49,3 @@ ENTRY(nmi_slot) #endif ENTRY(user_break_point_trap) .long break_point_trap /* 1E0 */ -ENTRY(interrupt_table) - ! external hardware - .long do_IRQ ! 0000 /* 200 */ - .long do_IRQ ! 0001 - .long do_IRQ ! 0010 - .long do_IRQ ! 0011 - .long do_IRQ ! 0100 - .long do_IRQ ! 0101 - .long do_IRQ ! 0110 - .long do_IRQ ! 0111 - .long do_IRQ ! 1000 /* 300 */ - .long do_IRQ ! 1001 - .long do_IRQ ! 1010 - .long do_IRQ ! 1011 - .long do_IRQ ! 1100 - .long do_IRQ ! 1101 - .long do_IRQ ! 1110 - .long exception_error - ! Internal hardware - .long do_IRQ ! TMU0 tuni0 /* 400 */ - .long do_IRQ ! TMU1 tuni1 - .long do_IRQ ! TMU2 tuni2 - .long do_IRQ ! ticpi2 - .long do_IRQ ! RTC ati - .long do_IRQ ! pri - .long do_IRQ ! cui - .long do_IRQ ! SCI eri - .long do_IRQ ! rxi /* 500 */ - .long do_IRQ ! txi - .long do_IRQ ! tei - .long do_IRQ ! WDT iti /* 560 */ - .long do_IRQ ! REF rcmi - .long do_IRQ ! rovi - .long do_IRQ - .long do_IRQ /* 5E0 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || \ - defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) - .long do_IRQ ! 32 IRQ irq0 /* 600 */ - .long do_IRQ ! 33 irq1 - .long do_IRQ ! 34 irq2 - .long do_IRQ ! 35 irq3 - .long do_IRQ ! 36 irq4 - .long do_IRQ ! 37 irq5 - .long do_IRQ ! 38 - .long do_IRQ ! 39 - .long do_IRQ ! 40 PINT pint0-7 /* 700 */ - .long do_IRQ ! 41 pint8-15 - .long do_IRQ ! 42 - .long do_IRQ ! 43 - .long do_IRQ ! 44 - .long do_IRQ ! 45 - .long do_IRQ ! 46 - .long do_IRQ ! 47 - .long do_IRQ ! 48 DMAC dei0 /* 800 */ - .long do_IRQ ! 49 dei1 - .long do_IRQ ! 50 dei2 - .long do_IRQ ! 51 dei3 - .long do_IRQ ! 52 IrDA eri1 - .long do_IRQ ! 53 rxi1 - .long do_IRQ ! 54 bri1 - .long do_IRQ ! 55 txi1 - .long do_IRQ ! 56 SCIF eri2 - .long do_IRQ ! 57 rxi2 - .long do_IRQ ! 58 bri2 - .long do_IRQ ! 59 txi2 - .long do_IRQ ! 60 ADC adi /* 980 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7705) - .long exception_none ! 61 /* 9A0 */ - .long exception_none ! 62 - .long exception_none ! 63 - .long exception_none ! 64 /* A00 */ - .long do_IRQ ! 65 USB usi0 - .long do_IRQ ! 66 usi1 - .long exception_none ! 67 - .long exception_none ! 68 - .long exception_none ! 69 - .long exception_none ! 70 - .long exception_none ! 71 - .long exception_none ! 72 /* B00 */ - .long exception_none ! 73 - .long exception_none ! 74 - .long exception_none ! 75 - .long exception_none ! 76 - .long exception_none ! 77 - .long exception_none ! 78 - .long exception_none ! 79 - .long do_IRQ ! 80 TPU0 tpi0 /* C00 */ - .long do_IRQ ! 81 TPU1 tpi1 - .long exception_none ! 82 - .long exception_none ! 83 - .long do_IRQ ! 84 TPU2 tpi2 - .long do_IRQ ! 85 TPU3 tpi3 /* CA0 */ -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7300) - .long do_IRQ ! 61 LCDC lcdi /* 9A0 */ - .long do_IRQ ! 62 PCC pcc0i - .long do_IRQ ! 63 pcc1i /* 9E0 */ -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7710) - .long exception_none ! 61 /* 9A0 */ - .long exception_none ! 62 - .long exception_none ! 63 - .long exception_none ! 64 /* A00 */ - .long exception_none ! 65 - .long exception_none ! 66 - .long exception_none ! 67 - .long exception_none ! 68 - .long exception_none ! 69 - .long exception_none ! 70 - .long exception_none ! 71 - .long exception_none ! 72 /* B00 */ - .long exception_none ! 73 - .long exception_none ! 74 - .long exception_none ! 75 - .long do_IRQ ! 76 DMAC2 dei4 /* B80 */ - .long do_IRQ ! 77 DMAC2 dei5 - .long exception_none ! 78 - .long do_IRQ ! 79 IPSEC ipseci /* BE0 */ - .long do_IRQ ! 80 EDMAC eint0 /* C00 */ - .long do_IRQ ! 81 EDMAC eint1 - .long do_IRQ ! 82 EDMAC eint2 - .long exception_none ! 83 /* C60 */ - .long exception_none ! 84 - .long exception_none ! 85 - .long exception_none ! 86 - .long exception_none ! 87 - .long exception_none ! 88 /* D00 */ - .long exception_none ! 89 - .long exception_none ! 90 - .long exception_none ! 91 - .long exception_none ! 92 - .long exception_none ! 93 - .long exception_none ! 94 - .long exception_none ! 95 - .long do_IRQ ! 96 SIOF eri0 /* E00 */ - .long do_IRQ ! 97 txi0 - .long do_IRQ ! 98 rxi0 - .long do_IRQ ! 99 cci0 - .long do_IRQ ! 100 eri1 /* E80 */ - .long do_IRQ ! 101 txi1 - .long do_IRQ ! 102 rxi2 - .long do_IRQ ! 103 cci3 -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7300) - .long do_IRQ ! 64 - .long do_IRQ ! 65 - .long do_IRQ ! 66 - .long do_IRQ ! 67 - .long do_IRQ ! 68 - .long do_IRQ ! 69 - .long do_IRQ ! 70 - .long do_IRQ ! 71 - .long do_IRQ ! 72 - .long do_IRQ ! 73 - .long do_IRQ ! 74 - .long do_IRQ ! 75 - .long do_IRQ ! 76 - .long do_IRQ ! 77 - .long do_IRQ ! 78 - .long do_IRQ ! 79 - .long do_IRQ ! 80 SCIF0(SH7300) - .long do_IRQ ! 81 - .long do_IRQ ! 82 - .long do_IRQ ! 83 - .long do_IRQ ! 84 - .long do_IRQ ! 85 - .long do_IRQ ! 86 - .long do_IRQ ! 87 - .long do_IRQ ! 88 - .long do_IRQ ! 89 - .long do_IRQ ! 90 - .long do_IRQ ! 91 - .long do_IRQ ! 92 - .long do_IRQ ! 93 - .long do_IRQ ! 94 - .long do_IRQ ! 95 - .long do_IRQ ! 96 - .long do_IRQ ! 97 - .long do_IRQ ! 98 - .long do_IRQ ! 99 - .long do_IRQ ! 100 - .long do_IRQ ! 101 - .long do_IRQ ! 102 - .long do_IRQ ! 103 - .long do_IRQ ! 104 - .long do_IRQ ! 105 - .long do_IRQ ! 106 - .long do_IRQ ! 107 - .long do_IRQ ! 108 -#endif -#endif diff --git a/arch/sh/kernel/cpu/sh4/ex.S b/arch/sh/kernel/cpu/sh4/ex.S index 7146893a6cc..3f4cd043e90 100644 --- a/arch/sh/kernel/cpu/sh4/ex.S +++ b/arch/sh/kernel/cpu/sh4/ex.S @@ -53,503 +53,3 @@ ENTRY(nmi_slot) #endif ENTRY(user_break_point_trap) .long break_point_trap /* 1E0 */ -ENTRY(interrupt_table) - ! external hardware - .long do_IRQ ! 0000 /* 200 */ - .long do_IRQ ! 0001 - .long do_IRQ ! 0010 - .long do_IRQ ! 0011 - .long do_IRQ ! 0100 - .long do_IRQ ! 0101 - .long do_IRQ ! 0110 - .long do_IRQ ! 0111 - .long do_IRQ ! 1000 /* 300 */ - .long do_IRQ ! 1001 - .long do_IRQ ! 1010 - .long do_IRQ ! 1011 - .long do_IRQ ! 1100 - .long do_IRQ ! 1101 - .long do_IRQ ! 1110 - .long exception_error - ! Internal hardware -#ifndef CONFIG_CPU_SUBTYPE_SH7780 - .long do_IRQ ! TMU0 tuni0 /* 400 */ - .long do_IRQ ! TMU1 tuni1 - .long do_IRQ ! TMU2 tuni2 - .long do_IRQ ! ticpi2 -#if defined(CONFIG_CPU_SUBTYPE_SH7760) - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* 500 */ - .long exception_error - .long exception_error -#else - .long do_IRQ ! RTC ati - .long do_IRQ ! pri - .long do_IRQ ! cui - .long do_IRQ ! SCI eri - .long do_IRQ ! rxi /* 500 */ - .long do_IRQ ! txi - .long do_IRQ ! tei -#endif - .long do_IRQ ! WDT iti /* 560 */ - .long do_IRQ ! REF rcmi - .long do_IRQ ! rovi - .long do_IRQ - .long do_IRQ /* 5E0 */ - .long do_IRQ ! 32 Hitachi UDI /* 600 */ - .long do_IRQ ! 33 GPIO - .long do_IRQ ! 34 DMAC dmte0 - .long do_IRQ ! 35 dmte1 - .long do_IRQ ! 36 dmte2 - .long do_IRQ ! 37 dmte3 - .long do_IRQ ! 38 dmae - .long exception_error ! 39 /* 6E0 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7760) - .long exception_error /* 700 */ - .long exception_error - .long exception_error - .long exception_error /* 760 */ -#else - .long do_IRQ ! 40 SCIF eri /* 700 */ - .long do_IRQ ! 41 rxi - .long do_IRQ ! 42 bri - .long do_IRQ ! 43 txi -#endif -#if CONFIG_NR_ONCHIP_DMA_CHANNELS == 8 - .long do_IRQ ! 44 DMAC dmte4 /* 780 */ - .long do_IRQ ! 45 dmte5 - .long do_IRQ ! 46 dmte6 - .long do_IRQ ! 47 dmte7 /* 7E0 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7343) - .long do_IRQ ! 44 IIC1 ali /* 780 */ - .long do_IRQ ! 45 tacki - .long do_IRQ ! 46 waiti - .long do_IRQ ! 47 dtei /* 7E0 */ - .long do_IRQ ! 48 DMAC dei0 /* 800 */ - .long do_IRQ ! 49 dei1 /* 820 */ -#else - .long exception_error ! 44 /* 780 */ - .long exception_error ! 45 - .long exception_error ! 46 - .long exception_error ! 47 -#endif -#if defined(CONFIG_SH_FPU) - .long do_fpu_state_restore ! 48 /* 800 */ - .long do_fpu_state_restore ! 49 /* 820 */ -#elif !defined(CONFIG_CPU_SUBTYPE_SH7343) && \ - !defined(CONFIG_CPU_SUBTYPE_SH73180) - .long exception_error - .long exception_error -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7751) - .long exception_error /* 840 */ - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* 900 */ - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! PCI serr /* A00 */ - .long do_IRQ ! dma3 - .long do_IRQ ! dma2 - .long do_IRQ ! dma1 - .long do_IRQ ! dma0 - .long do_IRQ ! pwon - .long do_IRQ ! pwdwn - .long do_IRQ ! err - .long do_IRQ ! TMU3 tuni3 /* B00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! TMU4 tuni4 /* B80 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) - .long do_IRQ ! IRQ irq6 /* 840 */ - .long do_IRQ ! irq7 - .long do_IRQ ! SCIF eri0 - .long do_IRQ ! rxi0 - .long do_IRQ ! bri0 - .long do_IRQ ! txi0 - .long do_IRQ ! HCAN2 cani0 /* 900 */ - .long do_IRQ ! cani1 - .long do_IRQ ! SSI ssii0 - .long do_IRQ ! ssii1 - .long do_IRQ ! HAC haci0 - .long do_IRQ ! haci1 - .long do_IRQ ! IIC iici0 - .long do_IRQ ! iici1 - .long do_IRQ ! USB usbi /* A00 */ - .long do_IRQ ! LCDC vint - .long exception_error - .long exception_error - .long do_IRQ ! DMABRG dmabrgi0 - .long do_IRQ ! dmabrgi1 - .long do_IRQ ! dmabrgi2 - .long exception_error - .long do_IRQ ! SCIF eri1 /* B00 */ - .long do_IRQ ! rxi1 - .long do_IRQ ! bri1 - .long do_IRQ ! txi1 - .long do_IRQ ! eri2 - .long do_IRQ ! rxi2 - .long do_IRQ ! bri2 - .long do_IRQ ! txi2 - .long do_IRQ ! SIM simeri /* C00 */ - .long do_IRQ ! simrxi - .long do_IRQ ! simtxi - .long do_IRQ ! simtei - .long do_IRQ ! HSPI spii - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! MMCIF mmci0 /* D00 */ - .long do_IRQ ! mmci1 - .long do_IRQ ! mmci2 - .long do_IRQ ! mmci3 - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* E00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! MFI mfii - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* F00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! ADC adi - .long do_IRQ ! CMT cmti /* FA0 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7343) - .long do_IRQ ! 50 0x840 - .long do_IRQ ! 51 0x860 - .long do_IRQ ! 52 0x880 - .long do_IRQ ! 53 0x8a0 - .long do_IRQ ! 54 0x8c0 - .long do_IRQ ! 55 0x8e0 - .long do_IRQ ! 56 0x900 - .long do_IRQ ! 57 0x920 - .long do_IRQ ! 58 0x940 - .long do_IRQ ! 59 0x960 - .long do_IRQ ! 60 0x980 - .long do_IRQ ! 61 0x9a0 - .long do_IRQ ! 62 0x9c0 - .long do_IRQ ! 63 0x9e0 - .long do_IRQ ! 64 0xa00 - .long do_IRQ ! 65 0xa20 - .long do_IRQ ! 66 0xa40 - .long do_IRQ ! 67 0xa60 - .long do_IRQ ! 68 0xa80 - .long do_IRQ ! 69 0xaa0 - .long do_IRQ ! 70 0xac0 - .long do_IRQ ! 71 0xae0 - .long do_IRQ ! 72 0xb00 - .long do_IRQ ! 73 0xb20 - .long do_IRQ ! 74 0xb40 - .long do_IRQ ! 75 0xb60 - .long do_IRQ ! 76 0xb80 - .long do_IRQ ! 77 0xba0 - .long do_IRQ ! 78 0xbc0 - .long do_IRQ ! 79 0xbe0 - .long do_IRQ ! 80 0xc00 - .long do_IRQ ! 81 0xc20 - .long do_IRQ ! 82 0xc40 - .long do_IRQ ! 83 0xc60 - .long do_IRQ ! 84 0xc80 - .long do_IRQ ! 85 0xca0 - .long do_IRQ ! 86 0xcc0 - .long do_IRQ ! 87 0xce0 - .long do_IRQ ! 88 0xd00 - .long do_IRQ ! 89 0xd20 - .long do_IRQ ! 90 0xd40 - .long do_IRQ ! 91 0xd60 - .long do_IRQ ! 92 0xd80 - .long do_IRQ ! 93 0xda0 - .long do_IRQ ! 94 0xdc0 - .long do_IRQ ! 95 0xde0 - .long do_IRQ ! 96 0xe00 - .long do_IRQ ! 97 0xe20 - .long do_IRQ ! 98 0xe40 - .long do_IRQ ! 99 0xe60 - .long do_IRQ ! 100 0xe80 - .long do_IRQ ! 101 0xea0 - .long do_IRQ ! 102 0xec0 - .long do_IRQ ! 103 0xee0 - .long do_IRQ ! 104 0xf00 - .long do_IRQ ! 105 0xf20 - .long do_IRQ ! 106 0xf40 - .long do_IRQ ! 107 0xf60 - .long do_IRQ ! 108 0xf80 -#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) - .long exception_error ! 50 0x840 - .long exception_error ! 51 0x860 - .long exception_error ! 52 0x880 - .long exception_error ! 53 0x8a0 - .long exception_error ! 54 0x8c0 - .long exception_error ! 55 0x8e0 - .long exception_error ! 56 0x900 - .long exception_error ! 57 0x920 - .long exception_error ! 58 0x940 - .long exception_error ! 59 0x960 - .long exception_error ! 60 0x980 - .long exception_error ! 61 0x9a0 - .long exception_error ! 62 0x9c0 - .long exception_error ! 63 0x9e0 - .long do_IRQ ! 64 0xa00 PCI serr - .long do_IRQ ! 65 0xa20 err - .long do_IRQ ! 66 0xa40 ad - .long do_IRQ ! 67 0xa60 pwr_dwn - .long exception_error ! 68 0xa80 - .long exception_error ! 69 0xaa0 - .long exception_error ! 70 0xac0 - .long exception_error ! 71 0xae0 - .long do_IRQ ! 72 0xb00 DMA INT0 - .long do_IRQ ! 73 0xb20 INT1 - .long do_IRQ ! 74 0xb40 INT2 - .long do_IRQ ! 75 0xb60 INT3 - .long do_IRQ ! 76 0xb80 INT4 - .long exception_error ! 77 0xba0 - .long do_IRQ ! 78 0xbc0 DMA ERR - .long exception_error ! 79 0xbe0 - .long do_IRQ ! 80 0xc00 PIO0 - .long do_IRQ ! 81 0xc20 PIO1 - .long do_IRQ ! 82 0xc40 PIO2 - .long exception_error ! 83 0xc60 - .long exception_error ! 84 0xc80 - .long exception_error ! 85 0xca0 - .long exception_error ! 86 0xcc0 - .long exception_error ! 87 0xce0 - .long exception_error ! 88 0xd00 - .long exception_error ! 89 0xd20 - .long exception_error ! 90 0xd40 - .long exception_error ! 91 0xd60 - .long exception_error ! 92 0xd80 - .long exception_error ! 93 0xda0 - .long exception_error ! 94 0xdc0 - .long exception_error ! 95 0xde0 - .long exception_error ! 96 0xe00 - .long exception_error ! 97 0xe20 - .long exception_error ! 98 0xe40 - .long exception_error ! 99 0xe60 - .long exception_error ! 100 0xe80 - .long exception_error ! 101 0xea0 - .long exception_error ! 102 0xec0 - .long exception_error ! 103 0xee0 - .long exception_error ! 104 0xf00 - .long exception_error ! 105 0xf20 - .long exception_error ! 106 0xf40 - .long exception_error ! 107 0xf60 - .long exception_error ! 108 0xf80 - .long exception_error ! 109 0xfa0 - .long exception_error ! 110 0xfc0 - .long exception_error ! 111 0xfe0 - .long do_IRQ ! 112 0x1000 Mailbox - .long exception_error ! 113 0x1020 - .long exception_error ! 114 0x1040 - .long exception_error ! 115 0x1060 - .long exception_error ! 116 0x1080 - .long exception_error ! 117 0x10a0 - .long exception_error ! 118 0x10c0 - .long exception_error ! 119 0x10e0 - .long exception_error ! 120 0x1100 - .long exception_error ! 121 0x1120 - .long exception_error ! 122 0x1140 - .long exception_error ! 123 0x1160 - .long exception_error ! 124 0x1180 - .long exception_error ! 125 0x11a0 - .long exception_error ! 126 0x11c0 - .long exception_error ! 127 0x11e0 - .long exception_error ! 128 0x1200 - .long exception_error ! 129 0x1220 - .long exception_error ! 130 0x1240 - .long exception_error ! 131 0x1260 - .long exception_error ! 132 0x1280 - .long exception_error ! 133 0x12a0 - .long exception_error ! 134 0x12c0 - .long exception_error ! 135 0x12e0 - .long exception_error ! 136 0x1300 - .long exception_error ! 137 0x1320 - .long exception_error ! 138 0x1340 - .long exception_error ! 139 0x1360 - .long do_IRQ ! 140 0x1380 EMPI INV_ADDR - .long exception_error ! 141 0x13a0 - .long exception_error ! 142 0x13c0 - .long exception_error ! 143 0x13e0 -#elif defined(CONFIG_CPU_SUBTYPE_SH7770) - .long do_IRQ ! 50 0x840 - .long do_IRQ ! 51 0x860 - .long do_IRQ ! 52 0x880 - .long do_IRQ ! 53 0x8a0 - .long do_IRQ ! 54 0x8c0 - .long do_IRQ ! 55 0x8e0 - .long do_IRQ ! 56 0x900 - .long do_IRQ ! 57 0x920 - .long do_IRQ ! 58 0x940 - .long do_IRQ ! 59 0x960 - .long do_IRQ ! 60 0x980 - .long do_IRQ ! 61 0x9a0 - .long do_IRQ ! 62 0x9c0 - .long do_IRQ ! 63 0x9e0 - .long do_IRQ ! 64 0xa00 - .long do_IRQ ! 65 0xa20 - .long do_IRQ ! 66 0xa4d - .long do_IRQ ! 67 0xa60 - .long do_IRQ ! 68 0xa80 - .long do_IRQ ! 69 0xaa0 - .long do_IRQ ! 70 0xac0 - .long do_IRQ ! 71 0xae0 - .long do_IRQ ! 72 0xb00 - .long do_IRQ ! 73 0xb20 - .long do_IRQ ! 74 0xb40 - .long do_IRQ ! 75 0xb60 - .long do_IRQ ! 76 0xb80 - .long do_IRQ ! 77 0xba0 - .long do_IRQ ! 78 0xbc0 - .long do_IRQ ! 79 0xbe0 - .long do_IRQ ! 80 0xc00 - .long do_IRQ ! 81 0xc20 - .long do_IRQ ! 82 0xc40 - .long do_IRQ ! 83 0xc60 - .long do_IRQ ! 84 0xc80 - .long do_IRQ ! 85 0xca0 - .long do_IRQ ! 86 0xcc0 - .long do_IRQ ! 87 0xce0 - .long do_IRQ ! 88 0xd00 - .long do_IRQ ! 89 0xd20 - .long do_IRQ ! 90 0xd40 - .long do_IRQ ! 91 0xd60 - .long do_IRQ ! 92 0xd80 - .long do_IRQ ! 93 0xda0 - .long do_IRQ ! 94 0xdc0 - .long do_IRQ ! 95 0xde0 - .long do_IRQ ! 96 0xe00 - .long do_IRQ ! 97 0xe20 - .long do_IRQ ! 98 0xe40 - .long do_IRQ ! 99 0xe60 - .long do_IRQ ! 100 0xe80 - .long do_IRQ ! 101 0xea0 - .long do_IRQ ! 102 0xec0 - .long do_IRQ ! 103 0xee0 - .long do_IRQ ! 104 0xf00 - .long do_IRQ ! 105 0xf20 - .long do_IRQ ! 106 0xf40 - .long do_IRQ ! 107 0xf60 - .long do_IRQ ! 108 0xf80 -#endif -#else - .long exception_error /* 400 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! RTC ati - .long do_IRQ ! pri - .long do_IRQ ! cui - .long exception_error - .long exception_error /* 500 */ - .long exception_error - .long exception_error - .long do_IRQ ! WDT iti /* 560 */ - .long do_IRQ ! TMU-ch0 - .long do_IRQ ! TMU-ch1 - .long do_IRQ ! TMU-ch2 - .long do_IRQ ! ticpi2 /* 5E0 */ - .long do_IRQ ! 32 Hitachi UDI /* 600 */ - .long exception_error - .long do_IRQ ! 34 DMAC dmte0 - .long do_IRQ ! 35 dmte1 - .long do_IRQ ! 36 dmte2 - .long do_IRQ ! 37 dmte3 - .long do_IRQ ! 38 dmae - .long exception_error ! 39 /* 6E0 */ - .long do_IRQ ! 40 SCIF-ch0 eri /* 700 */ - .long do_IRQ ! 41 rxi - .long do_IRQ ! 42 bri - .long do_IRQ ! 43 txi - .long do_IRQ ! 44 DMAC dmte4 /* 780 */ - .long do_IRQ ! 45 dmte5 - .long do_IRQ ! 46 dmte6 - .long do_IRQ ! 47 dmte7 /* 7E0 */ -#if defined(CONFIG_SH_FPU) - .long do_fpu_state_restore ! 48 /* 800 */ - .long do_fpu_state_restore ! 49 /* 820 */ -#else - .long exception_error - .long exception_error -#endif - .long exception_error /* 840 */ - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! 56 CMT /* 900 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! 60 HAC - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! PCI serr /* A00 */ - .long do_IRQ ! INTA - .long do_IRQ ! INTB - .long do_IRQ ! INTC - .long do_IRQ ! INTD - .long do_IRQ ! err - .long do_IRQ ! pwd3 - .long do_IRQ ! pwd2 - .long do_IRQ ! pwd1 /* B00 */ - .long do_IRQ ! pwd0 - .long exception_error - .long exception_error - .long do_IRQ ! SCIF-ch1 eri /* B80 */ - .long do_IRQ ! rxi - .long do_IRQ ! bri - .long do_IRQ ! txi - .long do_IRQ ! SIOF /* C00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! HSPI /* C80 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! MMCIF fatat /* D00 */ - .long do_IRQ ! tran - .long do_IRQ ! err - .long do_IRQ ! frdy - .long do_IRQ ! DMAC dmint8 /* D80 */ - .long do_IRQ ! dmint9 - .long do_IRQ ! dmint10 - .long do_IRQ ! dmint11 - .long do_IRQ ! TMU-ch3 /* E00 */ - .long do_IRQ ! TMU-ch4 - .long do_IRQ ! TMU-ch5 - .long exception_error - .long do_IRQ ! SSI - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! FLCTL flste /* F00 */ - .long do_IRQ ! fltend - .long do_IRQ ! fltrq0 - .long do_IRQ ! fltrq1 - .long do_IRQ ! GPIO gpioi0 /* F80 */ - .long do_IRQ ! gpioi1 - .long do_IRQ ! gpioi2 - .long do_IRQ ! gpioi3 -#endif - diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S index 97c571fbcdf..39aaefb2d83 100644 --- a/arch/sh/kernel/entry.S +++ b/arch/sh/kernel/entry.S @@ -1,9 +1,8 @@ -/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $ - * +/* * linux/arch/sh/entry.S * * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -78,7 +77,6 @@ OFF_TRA = (16*4+6*4) #define k3 r3 #define k4 r4 -#define k_ex_code r2_bank /* r2_bank1 */ #define g_imask r6 /* r6_bank1 */ #define k_g_imask r6_bank /* r6_bank1 */ #define current r7 /* r7_bank1 */ @@ -691,7 +689,7 @@ interrupt: 0: #endif /* defined(CONFIG_KGDB_NMI) */ bra handle_exception - mov.l @k2, k2 + mov #-1, k2 ! interrupt exception marker .align 2 1: .long EXPEVT @@ -717,8 +715,7 @@ ENTRY(handle_exception) add current, k1 mov k1, r15 ! change to kernel stack ! -1: mov #-1, k4 - mov.l 2f, k1 +1: mov.l 2f, k1 ! #ifdef CONFIG_SH_DSP mov.l r2, @-r15 ! Save r2, we need another reg @@ -763,6 +760,8 @@ skip_save: #endif ! Save the user registers on the stack. mov.l k2, @-r15 ! EXPEVT + + mov #-1, k4 mov.l k4, @-r15 ! set TRA (default: -1) ! sts.l macl, @-r15 @@ -797,8 +796,21 @@ skip_save: mov.l r2, @-r15 mov.l r1, @-r15 mov.l r0, @-r15 - ! Then, dispatch to the handler, according to the exception code. - stc k_ex_code, r8 + + /* + * This gets a bit tricky.. in the INTEVT case we don't want to use + * the VBR offset as a destination in the jump call table, since all + * of the destinations are the same. In this case, (interrupt) sets + * a marker in r2 (now r2_bank since SR.RB changed), which we check + * to determine the exception type. For all other exceptions, we + * forcibly read EXPEVT from memory and fix up the jump address, in + * the interrupt exception case we jump to do_IRQ() and defer the + * INTEVT read until there. As a bonus, we can also clean up the SR.RB + * checks that do_IRQ() was doing.. + */ + stc r2_bank, r8 + cmp/pz r8 + bf interrupt_exception shlr2 r8 shlr r8 mov.l 4f, r9 @@ -806,6 +818,8 @@ skip_save: mov.l @r9, r9 jmp @r9 nop + rts + nop .align 2 1: .long 0x00001000 ! DSP=1 @@ -813,8 +827,17 @@ skip_save: 3: .long 0xcfffffff ! RB=0, BL=0 4: .long exception_handling_table +interrupt_exception: + mov.l 1f, r9 + jmp @r9 + nop + rts + nop + + .align 2 +1: .long do_IRQ + .align 2 ENTRY(exception_none) rts nop - diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index c7ebd6aec95..acf2602569c 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -11,12 +11,15 @@ #include <linux/module.h> #include <linux/kernel_stat.h> #include <linux/seq_file.h> +#include <linux/io.h> #include <asm/irq.h> #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/thread_info.h> #include <asm/cpu/mmu_context.h> +atomic_t irq_err_count; + /* * 'what should we do if we get a hw irq event on an illegal vector'. * each architecture has to answer this themselves, it doesn't deserve @@ -24,6 +27,7 @@ */ void ack_bad_irq(unsigned int irq) { + atomic_inc(&irq_err_count); printk("unexpected IRQ trap at vector %02x\n", irq); } @@ -47,8 +51,10 @@ int show_interrupts(struct seq_file *p, void *v) if (!action) goto unlock; seq_printf(p, "%3d: ",i); - seq_printf(p, "%10u ", kstat_irqs(i)); - seq_printf(p, " %14s", irq_desc[i].chip->typename); + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); + seq_printf(p, " %14s", irq_desc[i].chip->name); + seq_printf(p, "-%s", handle_irq_name(irq_desc[i].handle_irq)); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) @@ -56,7 +62,9 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); unlock: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } + } else if (i == NR_IRQS) + seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); + return 0; } #endif @@ -78,7 +86,8 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs regs) { - int irq = r4; + struct pt_regs *old_regs = set_irq_regs(®s); + int irq; #ifdef CONFIG_4KSTACKS union irq_ctx *curctx, *irqctx; #endif @@ -102,20 +111,9 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, #endif #ifdef CONFIG_CPU_HAS_INTEVT - __asm__ __volatile__ ( -#ifdef CONFIG_CPU_HAS_SR_RB - "stc r2_bank, %0\n\t" + irq = (ctrl_inl(INTEVT) >> 5) - 16; #else - "mov.l @%1, %0\n\t" -#endif - "shlr2 %0\n\t" - "shlr2 %0\n\t" - "shlr %0\n\t" - "add #-16, %0\n\t" - : "=z" (irq), "=r" (r4) - : "1" (INTEVT) - : "memory" - ); + irq = r4; #endif irq = irq_demux(irq); @@ -139,25 +137,25 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, __asm__ __volatile__ ( "mov %0, r4 \n" - "mov %1, r5 \n" "mov r15, r9 \n" - "jsr @%2 \n" + "jsr @%1 \n" /* swith to the irq stack */ - " mov %3, r15 \n" + " mov %2, r15 \n" /* restore the stack (ring zero) */ "mov r9, r15 \n" : /* no outputs */ - : "r" (irq), "r" (®s), "r" (__do_IRQ), "r" (isp) + : "r" (irq), "r" (generic_handle_irq), "r" (isp) /* XXX: A somewhat excessive clobber list? -PFM */ : "memory", "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "t", "pr" ); } else #endif - __do_IRQ(irq, ®s); + generic_handle_irq(irq); irq_exit(); + set_irq_regs(old_regs); return 1; } diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 0b1d5dd7a93..91516dca4a8 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -5,6 +5,7 @@ * Copyright (C) 1995 Linus Torvalds * * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC */ /* @@ -290,6 +291,24 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, static void ubc_set_tracing(int asid, unsigned long pc) { +#if defined(CONFIG_CPU_SH4A) + unsigned long val; + + val = (UBC_CBR_ID_INST | UBC_CBR_RW_READ | UBC_CBR_CE); + val |= (UBC_CBR_AIE | UBC_CBR_AIV_SET(asid)); + + ctrl_outl(val, UBC_CBR0); + ctrl_outl(pc, UBC_CAR0); + ctrl_outl(0x0, UBC_CAMR0); + ctrl_outl(0x0, UBC_CBCR); + + val = (UBC_CRR_RES | UBC_CRR_PCB | UBC_CRR_BIE); + ctrl_outl(val, UBC_CRR0); + + /* Read UBC register that we writed last. For chekking UBC Register changed */ + val = ctrl_inl(UBC_CRR0); + +#else /* CONFIG_CPU_SH4A */ ctrl_outl(pc, UBC_BARA); #ifdef CONFIG_MMU @@ -307,6 +326,7 @@ ubc_set_tracing(int asid, unsigned long pc) ctrl_outw(BBR_INST | BBR_READ, UBC_BBRA); ctrl_outw(BRCR_PCBA, UBC_BRCR); } +#endif /* CONFIG_CPU_SH4A */ } /* @@ -359,8 +379,13 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne #endif ubc_set_tracing(asid, next->thread.ubc_pc); } else { +#if defined(CONFIG_CPU_SH4A) + ctrl_outl(UBC_CBR_INIT, UBC_CBR0); + ctrl_outl(UBC_CRR_INIT, UBC_CRR0); +#else ctrl_outw(0, UBC_BBRA); ctrl_outw(0, UBC_BBRB); +#endif } return prev; @@ -460,8 +485,13 @@ asmlinkage void break_point_trap(unsigned long r4, unsigned long r5, struct pt_regs regs) { /* Clear tracing. */ +#if defined(CONFIG_CPU_SH4A) + ctrl_outl(UBC_CBR_INIT, UBC_CBR0); + ctrl_outl(UBC_CRR_INIT, UBC_CRR0); +#else ctrl_outw(0, UBC_BBRA); ctrl_outw(0, UBC_BBRB); +#endif current->thread.ubc_pc = 0; ubc_usercnt -= 1; diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 450c68f1df0..57e708d7b52 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -47,6 +47,7 @@ unsigned long long __attribute__ ((weak)) sched_clock(void) return (unsigned long long)jiffies * (1000000000 / HZ); } +#ifndef CONFIG_GENERIC_TIME void do_gettimeofday(struct timeval *tv) { unsigned long seq; @@ -99,6 +100,7 @@ int do_settimeofday(struct timespec *tv) return 0; } EXPORT_SYMBOL(do_settimeofday); +#endif /* !CONFIG_GENERIC_TIME */ /* last time the RTC clock got updated */ static long last_rtc_update; @@ -107,13 +109,14 @@ static long last_rtc_update; * handle_timer_tick() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -void handle_timer_tick(struct pt_regs *regs) +void handle_timer_tick(void) { do_timer(1); #ifndef CONFIG_SMP - update_process_times(user_mode(regs)); + update_process_times(user_mode(get_irq_regs())); #endif - profile_tick(CPU_PROFILING, regs); + if (current->pid) + profile_tick(CPU_PROFILING); #ifdef CONFIG_HEARTBEAT if (sh_mv.mv_heartbeat != NULL) diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 205816fcf0d..24927015dc3 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -80,8 +80,7 @@ static unsigned long tmu_timer_get_offset(void) return count; } -static irqreturn_t tmu_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t tmu_timer_interrupt(int irq, void *dummy) { unsigned long timer_status; @@ -98,7 +97,7 @@ static irqreturn_t tmu_timer_interrupt(int irq, void *dev_id, * locally disabled. -arca */ write_seqlock(&xtime_lock); - handle_timer_tick(regs); + handle_timer_tick(); write_sequnlock(&xtime_lock); return IRQ_HANDLED; @@ -111,60 +110,6 @@ static struct irqaction tmu_irq = { .mask = CPU_MASK_NONE, }; -/* - * Hah! We'll see if this works (switching from usecs to nsecs). - */ -static unsigned long tmu_timer_get_frequency(void) -{ - u32 freq; - struct timespec ts1, ts2; - unsigned long diff_nsec; - unsigned long factor; - - /* Setup the timer: We don't want to generate interrupts, just - * have it count down at its natural rate. - */ - ctrl_outb(0, TMU_TSTR); -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760) - ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); -#endif - ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR); - ctrl_outl(0xffffffff, TMU0_TCOR); - ctrl_outl(0xffffffff, TMU0_TCNT); - - rtc_sh_get_time(&ts2); - - do { - rtc_sh_get_time(&ts1); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - /* actually start the timer */ - ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); - - do { - rtc_sh_get_time(&ts2); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - freq = 0xffffffff - ctrl_inl(TMU0_TCNT); - if (ts2.tv_nsec < ts1.tv_nsec) { - ts2.tv_nsec += 1000000000; - ts2.tv_sec--; - } - - diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec); - - /* this should work well if the RTC has a precision of n Hz, where - * n is an integer. I don't think we have to worry about the other - * cases. */ - factor = (1000000000 + diff_nsec/2) / diff_nsec; - - if (factor * diff_nsec > 1100000000 || - factor * diff_nsec < 900000000) - panic("weird RTC (diff_nsec %ld)", diff_nsec); - - return freq * factor; -} - static void tmu_clk_init(struct clk *clk) { u8 divisor = TMU0_TCR_INIT & 0x7; @@ -232,12 +177,12 @@ struct sys_timer_ops tmu_timer_ops = { .init = tmu_timer_init, .start = tmu_timer_start, .stop = tmu_timer_stop, - .get_frequency = tmu_timer_get_frequency, +#ifndef CONFIG_GENERIC_TIME .get_offset = tmu_timer_get_offset, +#endif }; struct sys_timer tmu_timer = { .name = "tmu", .ops = &tmu_timer_ops, }; - diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index c81e6b67ad3..38c82d890ff 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -28,6 +28,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) split_page(page, order); ret = page_address(page); + memset(ret, 0, size); *handle = virt_to_phys(ret); /* |