diff options
Diffstat (limited to 'arch/sh')
60 files changed, 3460 insertions, 1993 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 64f5ae0ff96..01bc7d589af 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -14,10 +14,6 @@ config SUPERH gaming console. The SuperH port has a home page at <http://www.linux-sh.org/>. -config UID16 - bool - default y - config RWSEM_GENERIC_SPINLOCK bool default y @@ -37,9 +33,11 @@ config GENERIC_CALIBRATE_DELAY bool default y +config GENERIC_IOMAP + bool + config ARCH_MAY_HAVE_PC_FDC bool - default y source "init/Kconfig" @@ -57,24 +55,28 @@ config SH_SOLUTION_ENGINE config SH_7751_SOLUTION_ENGINE bool "SolutionEngine7751" + select CPU_SUBTYPE_SH7751 help Select 7751 SolutionEngine if configuring for a Hitachi SH7751 evaluation board. config SH_7300_SOLUTION_ENGINE bool "SolutionEngine7300" + select CPU_SUBTYPE_SH7300 help Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V) evaluation board. config SH_73180_SOLUTION_ENGINE bool "SolutionEngine73180" + select CPU_SUBTYPE_SH73180 help Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3) evaluation board. config SH_7751_SYSTEMH bool "SystemH7751R" + select CPU_SUBTYPE_SH7751R help Select SystemH if you are configuring for a Renesas SystemH 7751R evaluation board. @@ -85,27 +87,13 @@ config SH_STB1_HARP config SH_STB1_OVERDRIVE bool "STB1_Overdrive" -config SH_HP620 - bool "HP620" +config SH_HP6XX + bool "HP6XX" help - Select HP620 if configuring for a HP jornada HP620. + Select HP6XX if configuring for a HP jornada HP6xx. More information (hardware only) at <http://www.hp.com/jornada/>. -config SH_HP680 - bool "HP680" - help - Select HP680 if configuring for a HP Jornada HP680. - More information (hardware only) at - <http://www.hp.com/jornada/products/680/>. - -config SH_HP690 - bool "HP690" - help - Select HP690 if configuring for a HP Jornada HP690. - More information (hardware only) - at <http://www.hp.com/jornada/products/680/>. - config SH_CQREEK bool "CqREEK" help @@ -127,11 +115,13 @@ config SH_EC3104 config SH_SATURN bool "Saturn" + select CPU_SUBTYPE_SH7604 help Select Saturn if configuring for a SEGA Saturn. config SH_DREAMCAST bool "Dreamcast" + select CPU_SUBTYPE_SH7091 help Select Dreamcast if configuring for a SEGA Dreamcast. More information at @@ -146,6 +136,7 @@ config SH_BIGSUR config SH_SH2000 bool "SH2000" + select CPU_SUBTYPE_SH7709 help SH-2000 is a single-board computer based around SH7709A chip intended for embedded applications. @@ -157,20 +148,22 @@ config SH_ADX bool "ADX" config SH_MPC1211 - bool "MPC1211" + bool "Interface MPC1211" + help + CTP/PCI-SH02 is a CPU module computer that is produced + by Interface Corporation. + More information at <http://www.interface.co.jp> config SH_SH03 - bool "SH03" + bool "Interface CTP/PCI-SH03" help - CTP/PCI-SH03 is a CPU module computer that produced + CTP/PCI-SH03 is a CPU module computer that is produced by Interface Corporation. - It is compact and excellent in durability. - It will play an active part in your factory or laboratory - as a FA computer. More information at <http://www.interface.co.jp> config SH_SECUREEDGE5410 bool "SecureEdge5410" + select CPU_SUBTYPE_SH7751R help Select SecureEdge5410 if configuring for a SnapGear SH board. This includes both the OEM SecureEdge products as well as the @@ -178,25 +171,49 @@ config SH_SECUREEDGE5410 config SH_HS7751RVOIP bool "HS7751RVOIP" + select CPU_SUBTYPE_SH7751R help Select HS7751RVOIP if configuring for a Renesas Technology Sales VoIP board. config SH_RTS7751R2D bool "RTS7751R2D" + select CPU_SUBTYPE_SH7751R help Select RTS7751R2D if configuring for a Renesas Technology Sales SH-Graphics board. +config SH_R7780RP + bool "R7780RP-1" + select CPU_SUBTYPE_SH7780 + help + Select R7780RP-1 if configuring for a Renesas Solutions + HIGHLANDER board. + config SH_EDOSK7705 bool "EDOSK7705" + select CPU_SUBTYPE_SH7705 config SH_SH4202_MICRODEV bool "SH4-202 MicroDev" + select CPU_SUBTYPE_SH4_202 help Select SH4-202 MicroDev if configuring for a SuperH MicroDev board with an SH4-202 CPU. +config SH_LANDISK + bool "LANDISK" + select CPU_SUBTYPE_SH7751R + help + I-O DATA DEVICE, INC. "LANDISK Series" support. + +config SH_TITAN + bool "TITAN" + select CPU_SUBTYPE_SH7751R + help + Select Titan if you are configuring for a Nimble Microsystems + NetEngine NP51R. + config SH_UNKNOWN bool "BareCPU" help @@ -211,168 +228,27 @@ config SH_UNKNOWN endchoice -choice - prompt "Processor family" - default CPU_SH4 - help - This option determines the CPU family to compile for. Supported - targets are SH-2, SH-3, and SH-4. These options are independent of - CPU functionality. As such, SH-DSP users will still want to select - their respective processor family in addition to the DSP support - option. - -config CPU_SH2 - bool "SH-2" - select SH_WRITETHROUGH - -config CPU_SH3 - bool "SH-3" - -config CPU_SH4 - bool "SH-4" - -endchoice - -choice - prompt "Processor subtype" - -config CPU_SUBTYPE_SH7604 - bool "SH7604" - depends on CPU_SH2 - help - Select SH7604 if you have SH7604 - -config CPU_SUBTYPE_SH7300 - bool "SH7300" - depends on CPU_SH3 - -config CPU_SUBTYPE_SH7705 - bool "SH7705" - depends on CPU_SH3 - -config CPU_SUBTYPE_SH7707 - bool "SH7707" - depends on CPU_SH3 - help - Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU. - -config CPU_SUBTYPE_SH7708 - bool "SH7708" - depends on CPU_SH3 - help - Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or - if you have a 100 Mhz SH-3 HD6417708R CPU. - -config CPU_SUBTYPE_SH7709 - bool "SH7709" - depends on CPU_SH3 - help - Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. - -config CPU_SUBTYPE_SH7750 - bool "SH7750" - depends on CPU_SH4 - help - Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. - -config CPU_SUBTYPE_SH7751 - bool "SH7751/SH7751R" - depends on CPU_SH4 - help - Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, - or if you have a HD6417751R CPU. - -config CPU_SUBTYPE_SH7760 - bool "SH7760" - depends on CPU_SH4 - -config CPU_SUBTYPE_SH73180 - bool "SH73180" - depends on CPU_SH4 - -config CPU_SUBTYPE_ST40STB1 - bool "ST40STB1 / ST40RA" - depends on CPU_SH4 - help - Select ST40STB1 if you have a ST40RA CPU. - This was previously called the ST40STB1, hence the option name. - -config CPU_SUBTYPE_ST40GX1 - bool "ST40GX1" - depends on CPU_SH4 - help - Select ST40GX1 if you have a ST40GX1 CPU. - -config CPU_SUBTYPE_SH4_202 - bool "SH4-202" - depends on CPU_SH4 - -endchoice - -config SH7705_CACHE_32KB - bool "Enable 32KB cache size for SH7705" - depends on CPU_SUBTYPE_SH7705 - default y - -config MMU - bool "Support for memory management hardware" - depends on !CPU_SH2 - default y - help - Early SH processors (such as the SH7604) lack an MMU. In order to - boot on these systems, this option must not be set. - - On other systems (such as the SH-3 and 4) where an MMU exists, - turning this off will boot the kernel on these machines with the - MMU implicitly switched off. - -choice - prompt "HugeTLB page size" - depends on HUGETLB_PAGE && CPU_SH4 && MMU - default HUGETLB_PAGE_SIZE_64K - -config HUGETLB_PAGE_SIZE_64K - bool "64K" - -config HUGETLB_PAGE_SIZE_1MB - bool "1MB" - -endchoice - -config CMDLINE_BOOL - bool "Default bootloader kernel arguments" - -config CMDLINE - string "Initial kernel command string" - depends on CMDLINE_BOOL - default "console=ttySC1,115200" +source "arch/sh/mm/Kconfig" -# Platform-specific memory start and size definitions config MEMORY_START - hex "Physical memory start address" if !MEMORY_SET || MEMORY_OVERRIDE - default "0x08000000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || SH_MPC1211 || SH_SH03 || SH_SECUREEDGE5410 || SH_SH4202_MICRODEV - default "0x0c000000" if !MEMORY_OVERRIDE && (SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_73180_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D || SH_EDOSK7705) + hex "Physical memory start address" + default "0x08000000" ---help--- Computers built with Hitachi SuperH processors always map the ROM starting at address zero. But the processor does not specify the range that RAM takes. The physical memory (RAM) start address will be automatically - set to 08000000, unless you selected one of the following - processor types: SolutionEngine, Overdrive, HP620, HP680, HP690, - in which case the start address will be set to 0c000000. + set to 08000000. Other platforms, such as the Solution Engine + boards typically map RAM at 0C000000. - Tweak this only when porting to a new machine which is not already - known by the config system. Changing it from the known correct + Tweak this only when porting to a new machine which does not + already have a defconfig. Changing it from the known correct value on any of the known systems will only lead to disaster. config MEMORY_SIZE - hex "Physical memory size" if !MEMORY_SET || MEMORY_OVERRIDE - default "0x00400000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || !MEMORY_OVERRIDE && (SH_HP600 || SH_BIGSUR || SH_SH2000) - default "0x01000000" if !MEMORY_OVERRIDE && SH_DREAMCAST || SH_SECUREEDGE5410 || SH_EDOSK7705 - default "0x02000000" if !MEMORY_OVERRIDE && (SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE) - default "0x04000000" if !MEMORY_OVERRIDE && (SH_7300_SOLUTION_ENGINE || SH_7751_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D || SH_SH4202_MICRODEV) - default "0x08000000" if SH_MPC1211 || SH_SH03 + hex "Physical memory size" + default "0x00400000" help This sets the default memory size assumed by your SH kernel. It can be overridden as normal by the 'mem=' argument on the kernel command @@ -380,21 +256,6 @@ config MEMORY_SIZE as 0x00400000 which was the default value before this became configurable. -config MEMORY_SET - bool - depends on !MEMORY_OVERRIDE && (SH_MPC1211 || SH_SH03 || SH_ADX || SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_SECUREEDGE5410 || SH_HS7751RVOIP || SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_EDOSK7705) - default y - help - This is an option about which you will never be asked a question. - Therefore, I conclude that you do not exist - go away. - - There is a grue here. - -# If none of the above have set memory start/size, ask the user. -config MEMORY_OVERRIDE - bool "Override default load address and memory size" - -# XXX: break these out into the board-specific configs below config CF_ENABLER bool "Compact Flash Enabler support" depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701 || SH_SH03 @@ -438,10 +299,21 @@ config CF_BASE_ADDR default "0xb8000000" if CF_AREA6 default "0xb4000000" if CF_AREA5 +menu "Processor features" + +config CPU_LITTLE_ENDIAN + bool "Little Endian" + help + Some SuperH machines can be configured for either little or big + endian byte order. These modes require different kernels. Say Y if + your machine is little endian, N if it's a big endian machine. + # The SH7750 RTC module is disabled in the Dreamcast config SH_RTC bool - depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE && !SH_73180_SOLUTION_ENGINE + depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE && \ + !SH_73180_SOLUTION_ENGINE && !SH_LANDISK && \ + !SH_R7780RP default y help Selecting this option will allow the Linux kernel to emulate @@ -480,104 +352,131 @@ config SH_ADC If unsure, say N. -config SH_HP600 +config SH_STORE_QUEUES + bool "Support for Store Queues" + depends on CPU_SH4 + help + Selecting this option will enable an in-kernel API for manipulating + the store queues integrated in the SH-4 processors. + +config CPU_HAS_INTEVT bool - depends on SH_HP620 || SH_HP680 || SH_HP690 - default y -config CPU_SUBTYPE_ST40 - bool - depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1 - default y +config CPU_HAS_PINT_IRQ + bool -source "mm/Kconfig" +config CPU_HAS_INTC2_IRQ + bool -config ZERO_PAGE_OFFSET - hex "Zero page offset" - default "0x00001000" if !(SH_MPC1211 || SH_SH03) - default "0x00004000" if SH_MPC1211 || SH_SH03 +config CPU_HAS_SR_RB + bool "CPU has SR.RB" + depends on CPU_SH3 || CPU_SH4 + default y help - This sets the default offset of zero page. + This will enable the use of SR.RB register bank usage. Processors + that are lacking this bit must have another method in place for + accomplishing what is taken care of by the banked registers. -# XXX: needs to lose subtype for system type -config ST40_LMI_MEMORY - bool "Memory on LMI" - depends on CPU_SUBTYPE_ST40STB1 + See <file:Documentation/sh/register-banks.txt> for further + information on SR.RB and register banking in the kernel in general. -config MEMORY_START - hex - depends on CPU_SUBTYPE_ST40STB1 && ST40_LMI_MEMORY - default "0x08000000" +endmenu -config MEMORY_SIZE - hex - depends on CPU_SUBTYPE_ST40STB1 && ST40_LMI_MEMORY - default "0x00400000" +menu "Timer support" -config MEMORY_SET - bool - depends on CPU_SUBTYPE_ST40STB1 && ST40_LMI_MEMORY +config SH_TMU + bool "TMU timer support" default y - -config BOOT_LINK_OFFSET - hex "Link address offset for booting" - default "0x00800000" help - This option allows you to set the link address offset of the zImage. - This can be useful if you are on a board which has a small amount of - memory. + This enables the use of the TMU as the system timer. -config CPU_LITTLE_ENDIAN - bool "Little Endian" - help - Some SuperH machines can be configured for either little or big - endian byte order. These modes require different kernels. Say Y if - your machine is little endian, N if it's a big endian machine. +endmenu -config PREEMPT - bool "Preemptible Kernel (EXPERIMENTAL)" - depends on EXPERIMENTAL +source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" -config UBC_WAKEUP - bool "Wakeup UBC on startup" +source "arch/sh/boards/renesas/rts7751r2d/Kconfig" + +config SH_PCLK_FREQ_BOOL + bool "Set default pclk frequency" + default y if !SH_RTC + default n + +config SH_PCLK_FREQ + int "Peripheral clock frequency (in Hz)" + depends on SH_PCLK_FREQ_BOOL + default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 + default "60000000" if CPU_SUBTYPE_SH7751 + default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7760 + default "27000000" if CPU_SUBTYPE_SH73180 + default "66000000" if CPU_SUBTYPE_SH4_202 help - Selecting this option will wakeup the User Break Controller (UBC) on - startup. Although the UBC is left in an awake state when the processor - comes up, some boot loaders misbehave by putting the UBC to sleep in a - power saving state, which causes issues with things like ptrace(). + This option is used to specify the peripheral clock frequency. + This is necessary for determining the reference clock value on + platforms lacking an RTC. - If unsure, say N. +menu "CPU Frequency scaling" + +source "drivers/cpufreq/Kconfig" -config SH_WRITETHROUGH - bool "Use write-through caching" - default y if CPU_SH2 +config SH_CPU_FREQ + tristate "SuperH CPU Frequency driver" + depends on CPU_FREQ + select CPU_FREQ_TABLE help - Selecting this option will configure the caches in write-through - mode, as opposed to the default write-back configuration. + This adds the cpufreq driver for SuperH. At present, only + the SH-4 is supported. - Since there's sill some aliasing issues on SH-4, this option will - unfortunately still require the majority of flushing functions to - be implemented to deal with aliasing. + For details, take a look at <file:Documentation/cpu-freq>. If unsure, say N. -config SH_OCRAM - bool "Operand Cache RAM (OCRAM) support" +endmenu + +source "arch/sh/drivers/dma/Kconfig" + +source "arch/sh/cchips/Kconfig" + +config HEARTBEAT + bool "Heartbeat LED" + depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || \ + SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || \ + SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || \ + SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || \ + SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK help - Selecting this option will automatically tear down the number of - sets in the dcache by half, which in turn exposes a memory range. + Use the power-on LED on your machine as a load meter. The exact + behavior is platform-dependent, but normally the flash frequency is + a hyperbolic function of the 5-minute load average. - The addresses for the OC RAM base will vary according to the - processor version. Consult vendor documentation for specifics. +endmenu - If unsure, say N. +config ISA_DMA_API + bool + depends on MPC1211 + default y -config SH_STORE_QUEUES - bool "Support for Store Queues" - depends on CPU_SH4 +menu "Kernel features" + +config KEXEC + bool "kexec system call (EXPERIMENTAL)" + depends on EXPERIMENTAL help - Selecting this option will enable an in-kernel API for manipulating - the store queues integrated in the SH-4 processors. + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is indepedent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similiarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. It may help to enable device hotplugging + support. As of this writing the exact hardware interface is + strongly in flux, so no good recommendation can be made. + +config PREEMPT + bool "Preemptible Kernel (EXPERIMENTAL)" + depends on EXPERIMENTAL config SMP bool "Symmetric multi-processing support" @@ -614,87 +513,58 @@ config NR_CPUS This is purely to save memory - each supported CPU adds approximately eight kilobytes to the kernel image. -config HS7751RVOIP_CODEC - bool "Support VoIP Codec section" - depends on SH_HS7751RVOIP - help - Selecting this option will support CODEC section. - -config RTS7751R2D_REV11 - bool "RTS7751R2D Rev. 1.1 board support" - depends on SH_RTS7751R2D - help - Selecting this option will support version rev. 1.1. - -config SH_PCLK_CALC - bool - default n if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH73180 +config CPU_HAS_SR_RB + bool "CPU has SR.RB" + depends on CPU_SH3 || CPU_SH4 default y help - This option will cause the PCLK value to be probed at run-time. It - will display a notification if the probed value has greater than a - 1% variance of the hardcoded CONFIG_SH_PCLK_FREQ. + This will enable the use of SR.RB register bank usage. Processors + that are lacking this bit must have another method in place for + accomplishing what is taken care of by the banked registers. -config SH_PCLK_FREQ - int "Peripheral clock frequency (in Hz)" - default "50000000" if CPU_SUBTYPE_SH7750 - default "60000000" if CPU_SUBTYPE_SH7751 - default "33333333" if CPU_SUBTYPE_SH7300 - default "27000000" if CPU_SUBTYPE_SH73180 - default "66000000" if CPU_SUBTYPE_SH4_202 - default "1193182" - help - This option is used to specify the peripheral clock frequency. This - option must be set for each processor in order for the kernel to - function reliably. If no sane default exists, we use a default from - the legacy i8254. Any discrepancies will be reported on boot time - with an auto-probed frequency which should be considered the proper - value for your hardware. + See <file:Documentation/sh/register-banks.txt> for further + information on SR.RB and register banking in the kernel in general. -menu "CPU Frequency scaling" +endmenu -source "drivers/cpufreq/Kconfig" +menu "Boot options" -config SH_CPU_FREQ - tristate "SuperH CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE +config ZERO_PAGE_OFFSET + hex "Zero page offset" + default "0x00004000" if SH_MPC1211 || SH_SH03 + default "0x00001000" help - This adds the cpufreq driver for SuperH. At present, only - the SH-4 is supported. - - For details, take a look at <file:Documentation/cpu-freq>. - - If unsure, say N. + This sets the default offset of zero page. -endmenu +config BOOT_LINK_OFFSET + hex "Link address offset for booting" + default "0x00800000" + help + This option allows you to set the link address offset of the zImage. + This can be useful if you are on a board which has a small amount of + memory. -source "arch/sh/drivers/dma/Kconfig" +config UBC_WAKEUP + bool "Wakeup UBC on startup" + help + Selecting this option will wakeup the User Break Controller (UBC) on + startup. Although the UBC is left in an awake state when the processor + comes up, some boot loaders misbehave by putting the UBC to sleep in a + power saving state, which causes issues with things like ptrace(). -source "arch/sh/cchips/Kconfig" + If unsure, say N. -config HEARTBEAT - bool "Heartbeat LED" - depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_RTS7751R2D || SH_SH4202_MICRODEV - help - Use the power-on LED on your machine as a load meter. The exact - behavior is platform-dependent, but normally the flash frequency is - a hyperbolic function of the 5-minute load average. +config CMDLINE_BOOL + bool "Default bootloader kernel arguments" -config RTC_9701JE - tristate "EPSON RTC-9701JE support" - depends on SH_RTS7751R2D - help - Selecting this option will support EPSON RTC-9701JE. +config CMDLINE + string "Initial kernel command string" + depends on CMDLINE_BOOL + default "console=ttySC1,115200" endmenu -config ISA_DMA_API - bool - depends on MPC1211 - default y - -menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" +menu "Bus options" # Even on SuperH devices which don't have an ISA bus, # this variable helps the PCMCIA modules handle @@ -705,7 +575,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" # PCMCIA outright. -- PFM. config ISA bool - default y if PCMCIA || SMC91X + default y if PCMCIA help Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff @@ -739,10 +609,9 @@ config MCA config SBUS bool -config MAPLE - tristate "Maple Bus support" - depends on SH_DREAMCAST - default y +config SUPERHYWAY + tristate "SuperHyway Bus support" + depends on CPU_SUBTYPE_SH4_202 source "arch/sh/drivers/pci/Kconfig" diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 3fab181da36..8fb31ab2c02 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -17,7 +17,7 @@ config SH_STANDARD_BIOS config EARLY_SCIF_CONSOLE bool "Use early SCIF console" - depends on CPU_SH4 + depends on CPU_SH4 || CPU_SH2A && !SH_STANDARD_BIOS config EARLY_PRINTK bool "Early printk support" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 67192d6b00d..08c9515c480 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -17,10 +17,30 @@ cflags-y := -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) := -ml +isa-y := any +isa-$(CONFIG_CPU_SH2) := sh2 +isa-$(CONFIG_CPU_SH3) := sh3 +isa-$(CONFIG_CPU_SH4) := sh4 +isa-$(CONFIG_CPU_SH4A) := sh4a +isa-$(CONFIG_CPU_SH2A) := sh2a + +isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp + +ifndef CONFIG_MMU +isa-y := $(isa-y)-nommu +endif + +ifndef CONFIG_SH_FPU +isa-y := $(isa-y)-nofpu +endif + +cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),) + cflags-$(CONFIG_CPU_SH2) += -m2 cflags-$(CONFIG_CPU_SH3) += -m3 cflags-$(CONFIG_CPU_SH4) += -m4 \ $(call cc-option,-mno-implicit-fp,-m4-nofpu) +cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a-nofpu,) cflags-$(CONFIG_SH_DSP) += -Wa,-dsp cflags-$(CONFIG_SH_KGDB) += -g @@ -67,9 +87,7 @@ machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180 machdir-$(CONFIG_SH_STB1_HARP) := harp machdir-$(CONFIG_SH_STB1_OVERDRIVE) := overdrive -machdir-$(CONFIG_SH_HP620) := hp6xx/hp620 -machdir-$(CONFIG_SH_HP680) := hp6xx/hp680 -machdir-$(CONFIG_SH_HP690) := hp6xx/hp690 +machdir-$(CONFIG_SH_HP6XX) := hp6xx machdir-$(CONFIG_SH_CQREEK) := cqreek machdir-$(CONFIG_SH_DMIDA) := dmida machdir-$(CONFIG_SH_EC3104) := ec3104 @@ -119,31 +137,39 @@ boot := arch/sh/boot CPPFLAGS_vmlinux.lds := -traditional +ifneq ($(KBUILD_SRC),) +incdir-prefix := $(srctree)/include/asm-sh/ +else +incdir-prefix := +endif + # Update machine arch and proc symlinks if something which affects # them changed. We use .arch and .mach to indicate when they were # updated last, otherwise make uses the target directory mtime. include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) include/config/MARKER @echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)' -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-sh - $(Q)ln -fsn $(srctree)/include/asm-sh/$(cpuincdir-y) include/asm-sh/cpu -else - $(Q)ln -fsn $(cpuincdir-y) include/asm-sh/cpu -endif + $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi + $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu @touch $@ +# Most boards have their own mach directories. For the ones that +# don't, just reference the parent directory so the semantics are +# kept roughly the same. + include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/MARKER - @echo ' SYMLINK include/asm-sh/mach -> include/asm-sh/$(incdir-y)' -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-sh - $(Q)ln -fsn $(srctree)/include/asm-sh/$(incdir-y) include/asm-sh/mach -else - $(Q)ln -fsn $(incdir-y) include/asm-sh/mach -endif + @echo -n ' SYMLINK include/asm-sh/mach -> ' + $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi + $(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \ + echo -e 'include/asm-sh/$(incdir-y)'; \ + ln -fsn $(incdir-prefix)$(incdir-y) \ + include/asm-sh/mach; \ + else \ + echo -e 'include/asm-sh'; \ + ln -fsn $(incdir-prefix) include/asm-sh/mach; \ + fi @touch $@ - archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach .PHONY: maketools FORCE diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/hp6xx/Makefile new file mode 100644 index 00000000000..927fe0aa5df --- /dev/null +++ b/arch/sh/boards/hp6xx/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the HP6xx specific parts of the kernel +# + +obj-y := mach.o setup.o + diff --git a/arch/sh/boards/hp6xx/hp620/Makefile b/arch/sh/boards/hp6xx/hp620/Makefile deleted file mode 100644 index 20691dbce34..00000000000 --- a/arch/sh/boards/hp6xx/hp620/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the HP620 specific parts of the kernel -# - -obj-y := mach.o setup.o - diff --git a/arch/sh/boards/hp6xx/hp620/mach.c b/arch/sh/boards/hp6xx/hp620/mach.c deleted file mode 100644 index 0392d82b4a7..00000000000 --- a/arch/sh/boards/hp6xx/hp620/mach.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/arch/sh/boards/hp6xx/hp620/mach.c - * - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the HP620 - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> - -#include <asm/io.h> -#include <asm/hd64461/hd64461.h> -#include <asm/irq.h> - -/* - * The Machine Vector - */ - -struct sh_machine_vector mv_hp620 __initmv = { - .mv_nr_irqs = HD64461_IRQBASE+HD64461_IRQ_NUM, - - .mv_inb = hd64461_inb, - .mv_inw = hd64461_inw, - .mv_inl = hd64461_inl, - .mv_outb = hd64461_outb, - .mv_outw = hd64461_outw, - .mv_outl = hd64461_outl, - - .mv_inb_p = hd64461_inb_p, - .mv_inw_p = hd64461_inw, - .mv_inl_p = hd64461_inl, - .mv_outb_p = hd64461_outb_p, - .mv_outw_p = hd64461_outw, - .mv_outl_p = hd64461_outl, - - .mv_insb = hd64461_insb, - .mv_insw = hd64461_insw, - .mv_insl = hd64461_insl, - .mv_outsb = hd64461_outsb, - .mv_outsw = hd64461_outsw, - .mv_outsl = hd64461_outsl, - - .mv_irq_demux = hd64461_irq_demux, -}; -ALIAS_MV(hp620) diff --git a/arch/sh/boards/hp6xx/hp620/setup.c b/arch/sh/boards/hp6xx/hp620/setup.c deleted file mode 100644 index 045fc5da727..00000000000 --- a/arch/sh/boards/hp6xx/hp620/setup.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/sh/boards/hp6xx/hp620/setup.c - * - * Copyright (C) 2002 Andriy Skulysh, 2005 Kristoffer Ericson - * - * May be copied or modified under the terms of the GNU General Public - * License. See Linux/COPYING for more information. - * - * Setup code for an HP620. - * Due to similiarity with hp680/hp690 same inits are done (for now) - */ - -#include <linux/config.h> -#include <linux/init.h> -#include <asm/hd64461/hd64461.h> -#include <asm/io.h> -#include <asm/hp6xx/hp6xx.h> -#include <asm/cpu/dac.h> - -const char *get_system_type(void) -{ - return "HP620"; -} - -int __init platform_setup(void) -{ - u16 v; - - v = inw(HD64461_STBCR); - v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | - HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | - HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | - HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST | - HD64461_STBCR_SAFECKE_IST; - outw(v, HD64461_STBCR); - - v = inw(HD64461_GPADR); - v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0; - outw(v, HD64461_GPADR); - - sh_dac_disable(DAC_SPEAKER_VOLUME); - - return 0; -} - diff --git a/arch/sh/boards/hp6xx/hp680/Makefile b/arch/sh/boards/hp6xx/hp680/Makefile deleted file mode 100644 index 0beef11d9b1..00000000000 --- a/arch/sh/boards/hp6xx/hp680/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the HP680 specific parts of the kernel -# - -obj-y := mach.o setup.o - diff --git a/arch/sh/boards/hp6xx/hp690/Makefile b/arch/sh/boards/hp6xx/hp690/Makefile deleted file mode 100644 index fbbe95e75f8..00000000000 --- a/arch/sh/boards/hp6xx/hp690/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for the HP690 specific parts of the kernel -# - -obj-y := mach.o - diff --git a/arch/sh/boards/hp6xx/hp690/mach.c b/arch/sh/boards/hp6xx/hp690/mach.c deleted file mode 100644 index 2a4c68783cd..00000000000 --- a/arch/sh/boards/hp6xx/hp690/mach.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/sh/boards/hp6xx/hp690/mach.c - * - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Machine vector for the HP690 - */ - -#include <linux/init.h> - -#include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> - -#include <asm/io.h> -#include <asm/hd64461/hd64461.h> -#include <asm/irq.h> - -struct sh_machine_vector mv_hp690 __initmv = { - .mv_nr_irqs = HD64461_IRQBASE+HD64461_IRQ_NUM, - - .mv_inb = hd64461_inb, - .mv_inw = hd64461_inw, - .mv_inl = hd64461_inl, - .mv_outb = hd64461_outb, - .mv_outw = hd64461_outw, - .mv_outl = hd64461_outl, - - .mv_inb_p = hd64461_inb_p, - .mv_inw_p = hd64461_inw, - .mv_inl_p = hd64461_inl, - .mv_outb_p = hd64461_outb_p, - .mv_outw_p = hd64461_outw, - .mv_outl_p = hd64461_outl, - - .mv_insb = hd64461_insb, - .mv_insw = hd64461_insw, - .mv_insl = hd64461_insl, - .mv_outsb = hd64461_outsb, - .mv_outsw = hd64461_outsw, - .mv_outsl = hd64461_outsl, - - .mv_irq_demux = hd64461_irq_demux, -}; -ALIAS_MV(hp690) diff --git a/arch/sh/boards/hp6xx/hp680/mach.c b/arch/sh/boards/hp6xx/mach.c index d7348613604..08dbba910f7 100644 --- a/arch/sh/boards/hp6xx/hp680/mach.c +++ b/arch/sh/boards/hp6xx/mach.c @@ -1,5 +1,5 @@ /* - * linux/arch/sh/boards/hp6xx/hp680/mach.c + * linux/arch/sh/boards/hp6xx/mach.c * * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) * @@ -8,19 +8,12 @@ * * Machine vector for the HP680 */ - -#include <linux/init.h> - #include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/machvec_init.h> - +#include <asm/hd64461.h> #include <asm/io.h> -#include <asm/hd64461/hd64461.h> -#include <asm/hp6xx/io.h> #include <asm/irq.h> -struct sh_machine_vector mv_hp680 __initmv = { +struct sh_machine_vector mv_hp6xx __initmv = { .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM, .mv_inb = hd64461_inb, @@ -50,4 +43,4 @@ struct sh_machine_vector mv_hp680 __initmv = { .mv_irq_demux = hd64461_irq_demux, }; -ALIAS_MV(hp680) +ALIAS_MV(hp6xx) diff --git a/arch/sh/boards/hp6xx/hp680/setup.c b/arch/sh/boards/hp6xx/setup.c index 4170190f264..6d94a8e2e67 100644 --- a/arch/sh/boards/hp6xx/hp680/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -11,18 +11,19 @@ #include <linux/config.h> #include <linux/init.h> -#include <asm/hd64461/hd64461.h> #include <asm/io.h> +#include <asm/hd64461.h> #include <asm/hp6xx/hp6xx.h> #include <asm/cpu/dac.h> const char *get_system_type(void) { - return "HP680"; + return "HP6xx"; } int __init platform_setup(void) { + u8 v8; u16 v; v = inw(HD64461_STBCR); v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | @@ -30,12 +31,25 @@ int __init platform_setup(void) HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST | HD64461_STBCR_SAFECKE_IST; +#ifndef CONFIG_HD64461_ENABLER + v |= HD64461_STBCR_SPC1ST; +#endif outw(v, HD64461_STBCR); v = inw(HD64461_GPADR); v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0; outw(v, HD64461_GPADR); + outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR); + +#ifndef CONFIG_HD64461_ENABLER + outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR); +#endif + + sh_dac_output(0, DAC_SPEAKER_VOLUME); sh_dac_disable(DAC_SPEAKER_VOLUME); + v8 = ctrl_inb(DACR); + v8 &= ~DACR_DAE; + ctrl_outb(v8,DACR); return 0; } diff --git a/arch/sh/boards/overdrive/Makefile b/arch/sh/boards/overdrive/Makefile index 1762b59e927..245f03baf76 100644 --- a/arch/sh/boards/overdrive/Makefile +++ b/arch/sh/boards/overdrive/Makefile @@ -2,7 +2,7 @@ # Makefile for the STMicroelectronics Overdrive specific parts of the kernel # -obj-y := mach.o setup.o io.o irq.o led.o time.o +obj-y := mach.o setup.o io.o irq.o led.o obj-$(CONFIG_PCI) += fpga.o galileo.o pcidma.o diff --git a/arch/sh/boards/overdrive/setup.c b/arch/sh/boards/overdrive/setup.c index a36ce0284ed..94f6165d33b 100644 --- a/arch/sh/boards/overdrive/setup.c +++ b/arch/sh/boards/overdrive/setup.c @@ -17,8 +17,6 @@ #include <asm/overdrive/overdrive.h> #include <asm/overdrive/fpga.h> -extern void od_time_init(void); - const char *get_system_type(void) { return "SH7750 Overdrive"; @@ -31,11 +29,9 @@ int __init platform_setup(void) { #ifdef CONFIG_PCI init_overdrive_fpga(); - galileo_init(); + galileo_init(); #endif - board_time_init = od_time_init; - /* Enable RS232 receive buffers */ writel(0x1e, OVERDRIVE_CTRL); } diff --git a/arch/sh/boards/overdrive/time.c b/arch/sh/boards/overdrive/time.c deleted file mode 100644 index 68533690e09..00000000000 --- a/arch/sh/boards/overdrive/time.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * arch/sh/boards/overdrive/time.c - * - * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com) - * Copyright (C) 2002 Paul Mundt (lethal@chaoticdreams.org) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * STMicroelectronics Overdrive Support. - */ - -void od_time_init(void) -{ - struct frqcr_data { - unsigned short frqcr; - struct { - unsigned char multiplier; - unsigned char divisor; - } factor[3]; - }; - - static struct frqcr_data st40_frqcr_table[] = { - { 0x000, {{1,1}, {1,1}, {1,2}}}, - { 0x002, {{1,1}, {1,1}, {1,4}}}, - { 0x004, {{1,1}, {1,1}, {1,8}}}, - { 0x008, {{1,1}, {1,2}, {1,2}}}, - { 0x00A, {{1,1}, {1,2}, {1,4}}}, - { 0x00C, {{1,1}, {1,2}, {1,8}}}, - { 0x011, {{1,1}, {2,3}, {1,6}}}, - { 0x013, {{1,1}, {2,3}, {1,3}}}, - { 0x01A, {{1,1}, {1,2}, {1,4}}}, - { 0x01C, {{1,1}, {1,2}, {1,8}}}, - { 0x023, {{1,1}, {2,3}, {1,3}}}, - { 0x02C, {{1,1}, {1,2}, {1,8}}}, - { 0x048, {{1,2}, {1,2}, {1,4}}}, - { 0x04A, {{1,2}, {1,2}, {1,6}}}, - { 0x04C, {{1,2}, {1,2}, {1,8}}}, - { 0x05A, {{1,2}, {1,3}, {1,6}}}, - { 0x05C, {{1,2}, {1,3}, {1,6}}}, - { 0x063, {{1,2}, {1,4}, {1,4}}}, - { 0x06C, {{1,2}, {1,4}, {1,8}}}, - { 0x091, {{1,3}, {1,3}, {1,6}}}, - { 0x093, {{1,3}, {1,3}, {1,6}}}, - { 0x0A3, {{1,3}, {1,6}, {1,6}}}, - { 0x0DA, {{1,4}, {1,4}, {1,8}}}, - { 0x0DC, {{1,4}, {1,4}, {1,8}}}, - { 0x0EC, {{1,4}, {1,8}, {1,8}}}, - { 0x123, {{1,4}, {1,4}, {1,8}}}, - { 0x16C, {{1,4}, {1,8}, {1,8}}}, - }; - - struct memclk_data { - unsigned char multiplier; - unsigned char divisor; - }; - static struct memclk_data st40_memclk_table[8] = { - {1,1}, // 000 - {1,2}, // 001 - {1,3}, // 010 - {2,3}, // 011 - {1,4}, // 100 - {1,6}, // 101 - {1,8}, // 110 - {1,8} // 111 - }; - - unsigned long pvr; - - /* - * This should probably be moved into the SH3 probing code, and then - * use the processor structure to determine which CPU we are running - * on. - */ - pvr = ctrl_inl(CCN_PVR); - printk("PVR %08x\n", pvr); - - if (((pvr >> CCN_PVR_CHIP_SHIFT) & CCN_PVR_CHIP_MASK) == CCN_PVR_CHIP_ST40STB1) { - /* - * Unfortunatly the STB1 FRQCR values are different from the - * 7750 ones. - */ - struct frqcr_data *d; - int a; - unsigned long memclkcr; - struct memclk_data *e; - - for (a=0; a<ARRAY_SIZE(st40_frqcr_table); a++) { - d = &st40_frqcr_table[a]; - if (d->frqcr == (frqcr & 0x1ff)) - break; - } - if (a == ARRAY_SIZE(st40_frqcr_table)) { - d = st40_frqcr_table; - printk("ERROR: Unrecognised FRQCR value, using default multipliers\n"); - } - - memclkcr = ctrl_inl(CLOCKGEN_MEMCLKCR); - e = &st40_memclk_table[memclkcr & MEMCLKCR_RATIO_MASK]; - - printk("Clock multipliers: CPU: %d/%d Bus: %d/%d Mem: %d/%d Periph: %d/%d\n", - d->factor[0].multiplier, d->factor[0].divisor, - d->factor[1].multiplier, d->factor[1].divisor, - e->multiplier, e->divisor, - d->factor[2].multiplier, d->factor[2].divisor); - - current_cpu_data.master_clock = current_cpu_data.module_clock * - d->factor[2].divisor / - d->factor[2].multiplier; - current_cpu_data.bus_clock = current_cpu_data.master_clock * - d->factor[1].multiplier / - d->factor[1].divisor; - current_cpu_data.memory_clock = current_cpu_data.master_clock * - e->multiplier / e->divisor; - current_cpu_data.cpu_clock = current_cpu_data.master_clock * - d->factor[0].multiplier / - d->factor[0].divisor; -} - diff --git a/arch/sh/configs/hp680_defconfig b/arch/sh/configs/hp6xx_defconfig index c85d3655b53..b36f102cec8 100644 --- a/arch/sh/configs/hp680_defconfig +++ b/arch/sh/configs/hp6xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-sh -# Wed Mar 2 15:09:41 2005 +# Linux kernel version: 2.6.15-sh +# Wed Jan 4 15:32:56 2006 # CONFIG_SUPERH=y CONFIG_UID16=y @@ -17,31 +17,36 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_SYSCTL is not set -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set +CONFIG_HOTPLUG=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -49,6 +54,24 @@ CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_MODULES is not set # +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System type # # CONFIG_SH_SOLUTION_ENGINE is not set @@ -58,9 +81,7 @@ CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_SH_7751_SYSTEMH is not set # CONFIG_SH_STB1_HARP is not set # CONFIG_SH_STB1_OVERDRIVE is not set -# CONFIG_SH_HP620 is not set -CONFIG_SH_HP680=y -# CONFIG_SH_HP690 is not set +CONFIG_SH_HP6XX=y # CONFIG_SH_CQREEK is not set # CONFIG_SH_DMIDA is not set # CONFIG_SH_EC3104 is not set @@ -77,43 +98,90 @@ CONFIG_SH_HP680=y # CONFIG_SH_RTS7751R2D is not set # CONFIG_SH_EDOSK7705 is not set # CONFIG_SH_SH4202_MICRODEV is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set # CONFIG_SH_UNKNOWN is not set -# CONFIG_CPU_SH2 is not set + +# +# Processor selection +# CONFIG_CPU_SH3=y -# CONFIG_CPU_SH4 is not set + +# +# SH-2 Processor Support +# # CONFIG_CPU_SUBTYPE_SH7604 is not set + +# +# SH-3 Processor Support +# # CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set CONFIG_CPU_SUBTYPE_SH7709=y + +# +# SH-4 Processor Support +# # CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set # CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# ST40 Processor Support +# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set -# CONFIG_CPU_SUBTYPE_SH4_202 is not set + +# +# SH-4A Processor Support +# +# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set + +# +# Memory management options +# CONFIG_MMU=y -# CONFIG_CMDLINE_BOOL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_SH_OCRAM is not set CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x00400000 -CONFIG_MEMORY_SET=y -# CONFIG_MEMORY_OVERRIDE is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SH_RTC=y # CONFIG_SH_DSP is not set CONFIG_SH_ADC=y -CONFIG_SH_HP600=y -CONFIG_ZERO_PAGE_OFFSET=0x00001000 -CONFIG_BOOT_LINK_OFFSET=0x00800000 -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_PREEMPT is not set -# CONFIG_UBC_WAKEUP is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set -# CONFIG_SMP is not set -CONFIG_SH_PCLK_CALC=y -CONFIG_SH_PCLK_FREQ=1193182 + +# +# Timer support +# +CONFIG_SH_TMU=y +CONFIG_SH_PCLK_FREQ_BOOL=y +CONFIG_SH_PCLK_FREQ=22110000 # # CPU Frequency scaling @@ -123,7 +191,10 @@ CONFIG_SH_PCLK_FREQ=1193182 # # DMA support # -# CONFIG_SH_DMA is not set +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=4 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set +# CONFIG_DMA_PAGE_OPS is not set # # Companion Chips @@ -132,21 +203,47 @@ CONFIG_HD6446X_SERIES=y CONFIG_HD64461=y # CONFIG_HD64465 is not set CONFIG_HD64461_IRQ=36 -# CONFIG_HD64461_ENABLER is not set +CONFIG_HD64461_IOBASE=0xb0000000 +CONFIG_HD64461_ENABLER=y + +# +# Kernel features +# +# CONFIG_KEXEC is not set +# CONFIG_PREEMPT is not set +# CONFIG_SMP is not set # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# Boot options # +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_ISA=y # CONFIG_PCI is not set # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # +# CONFIG_I82365 is not set +# CONFIG_TCIC is not set +CONFIG_HD64461_PCMCIA=y +CONFIG_HD64461_PCMCIA_SOCKETS=1 +CONFIG_PCMCIA_PROBE=y # # PCI Hotplug Support @@ -160,9 +257,9 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # -# SH initrd options +# Networking # -# CONFIG_EMBEDDED_RAMDISK is not set +# CONFIG_NET is not set # # Device Drivers @@ -173,7 +270,11 @@ CONFIG_BINFMT_ELF=y # # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y + +# +# Connector - unified userspace <-> kernelspace linker +# # # Memory Technology Devices (MTD) @@ -188,30 +289,20 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # +# CONFIG_PNP is not set # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set # -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y - -# # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y @@ -224,6 +315,7 @@ CONFIG_BLK_DEV_IDE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set @@ -235,6 +327,7 @@ CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDE_GENERIC=y CONFIG_IDE_SH=y # CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set @@ -242,9 +335,15 @@ CONFIG_IDE_SH=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -252,6 +351,7 @@ CONFIG_IDE_SH=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -263,9 +363,8 @@ CONFIG_IDE_SH=y # # -# Networking support +# Network device support # -# CONFIG_NET is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -296,17 +395,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set @@ -316,6 +404,15 @@ CONFIG_SERIO=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -353,10 +450,22 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# # I2C support # # CONFIG_I2C is not set @@ -367,10 +476,21 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_W1 is not set # +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -383,27 +503,35 @@ CONFIG_LEGACY_PTY_COUNT=256 # Graphics support # CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_EPSON1355 is not set +# CONFIG_FB_S1D13XXX is not set CONFIG_FB_HIT=y # CONFIG_FB_VIRTUAL is not set # # Console display driver support # -# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set # CONFIG_FONT_8x16 is not set # CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set CONFIG_FONT_PEARL_8x8=y # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set # # Logo configuration @@ -414,7 +542,22 @@ CONFIG_FONT_PEARL_8x8=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=y +# CONFIG_OBSOLETE_OSS_DRIVER is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +CONFIG_SOUND_SH_DAC_AUDIO=y +CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL=1 # # USB support @@ -423,7 +566,7 @@ CONFIG_FONT_PEARL_8x8=y # CONFIG_USB_ARCH_HAS_OHCI is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # @@ -442,25 +585,29 @@ CONFIG_FONT_PEARL_8x8=y # CONFIG_INFINIBAND is not set # +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -471,8 +618,11 @@ CONFIG_DNOTIFY=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -481,14 +631,11 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -516,7 +663,46 @@ CONFIG_MSDOS_PARTITION=y # # Native Language Support # -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Profiling support @@ -526,7 +712,9 @@ CONFIG_MSDOS_PARTITION=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_FRAME_POINTER is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_KGDB is not set @@ -550,5 +738,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c index 96e3036ec2b..47c3e837599 100644 --- a/arch/sh/drivers/dma/dma-api.c +++ b/arch/sh/drivers/dma/dma-api.c @@ -3,7 +3,7 @@ * * SuperH-specific DMA management API * - * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2003, 2004, 2005 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -15,6 +15,7 @@ #include <linux/spinlock.h> #include <linux/proc_fs.h> #include <linux/list.h> +#include <linux/platform_device.h> #include <asm/dma.h> DEFINE_SPINLOCK(dma_spin_lock); @@ -55,16 +56,14 @@ static LIST_HEAD(registered_dmac_list); struct dma_info *get_dma_info(unsigned int chan) { - struct list_head *pos, *tmp; + struct dma_info *info; unsigned int total = 0; /* * Look for each DMAC's range to determine who the owner of * the channel is. */ - list_for_each_safe(pos, tmp, ®istered_dmac_list) { - struct dma_info *info = list_entry(pos, struct dma_info, list); - + list_for_each_entry(info, ®istered_dmac_list, list) { total += info->nr_channels; if (chan > total) continue; @@ -75,6 +74,20 @@ struct dma_info *get_dma_info(unsigned int chan) return NULL; } +static unsigned int get_nr_channels(void) +{ + struct dma_info *info; + unsigned int nr = 0; + + if (unlikely(list_empty(®istered_dmac_list))) + return nr; + + list_for_each_entry(info, ®istered_dmac_list, list) + nr += info->nr_channels; + + return nr; +} + struct dma_channel *get_dma_channel(unsigned int chan) { struct dma_info *info = get_dma_info(chan); @@ -173,7 +186,7 @@ int dma_xfer(unsigned int chan, unsigned long from, static int dma_read_proc(char *buf, char **start, off_t off, int len, int *eof, void *data) { - struct list_head *pos, *tmp; + struct dma_info *info; char *p = buf; if (list_empty(®istered_dmac_list)) @@ -182,8 +195,7 @@ static int dma_read_proc(char *buf, char **start, off_t off, /* * Iterate over each registered DMAC */ - list_for_each_safe(pos, tmp, ®istered_dmac_list) { - struct dma_info *info = list_entry(pos, struct dma_info, list); + list_for_each_entry(info, ®istered_dmac_list, list) { int i; /* @@ -205,9 +217,9 @@ static int dma_read_proc(char *buf, char **start, off_t off, #endif -int __init register_dmac(struct dma_info *info) +int register_dmac(struct dma_info *info) { - int i; + unsigned int total_channels, i; INIT_LIST_HEAD(&info->list); @@ -217,6 +229,11 @@ int __init register_dmac(struct dma_info *info) BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels); + info->pdev = platform_device_register_simple((char *)info->name, -1, + NULL, 0); + if (IS_ERR(info->pdev)) + return PTR_ERR(info->pdev); + /* * Don't touch pre-configured channels */ @@ -232,10 +249,12 @@ int __init register_dmac(struct dma_info *info) memset(info->channels, 0, size); } + total_channels = get_nr_channels(); for (i = 0; i < info->nr_channels; i++) { struct dma_channel *chan = info->channels + i; chan->chan = i; + chan->vchan = i + total_channels; memcpy(chan->dev_id, "Unused", 7); @@ -245,9 +264,7 @@ int __init register_dmac(struct dma_info *info) init_MUTEX(&chan->sem); init_waitqueue_head(&chan->wait_queue); -#ifdef CONFIG_SYSFS - dma_create_sysfs_files(chan); -#endif + dma_create_sysfs_files(chan, info); } list_add(&info->list, ®istered_dmac_list); @@ -255,12 +272,18 @@ int __init register_dmac(struct dma_info *info) return 0; } -void __exit unregister_dmac(struct dma_info *info) +void unregister_dmac(struct dma_info *info) { + unsigned int i; + + for (i = 0; i < info->nr_channels; i++) + dma_remove_sysfs_files(info->channels + i, info); + if (!(info->flags & DMAC_CHANNELS_CONFIGURED)) kfree(info->channels); list_del(&info->list); + platform_device_unregister(info->pdev); } static int __init dma_api_init(void) diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c index 231e3f6fb28..5afab6f56ec 100644 --- a/arch/sh/drivers/dma/dma-g2.c +++ b/arch/sh/drivers/dma/dma-g2.c @@ -140,7 +140,7 @@ static struct dma_ops g2_dma_ops = { }; static struct dma_info g2_dma_info = { - .name = "G2 DMA", + .name = "g2_dmac", .nr_channels = 4, .ops = &g2_dma_ops, .flags = DMAC_CHANNELS_TEI_CAPABLE, @@ -160,6 +160,7 @@ static int __init g2_dma_init(void) static void __exit g2_dma_exit(void) { free_irq(HW_EVENT_G2_DMA, 0); + unregister_dmac(&g2_dma_info); } subsys_initcall(g2_dma_init); diff --git a/arch/sh/drivers/dma/dma-isa.c b/arch/sh/drivers/dma/dma-isa.c index 1c9bc45b8bc..05a74ffdb68 100644 --- a/arch/sh/drivers/dma/dma-isa.c +++ b/arch/sh/drivers/dma/dma-isa.c @@ -25,14 +25,14 @@ * such, this code is meant for only the simplest of tasks (and shouldn't be * used in any new drivers at all). * - * It should also be noted that various functions here are labelled as - * being deprecated. This is due to the fact that the ops->xfer() method is - * the preferred way of doing things (as well as just grabbing the spinlock - * directly). As such, any users of this interface will be warned rather - * loudly. + * NOTE: ops->xfer() is the preferred way of doing things. However, there + * are some users of the ISA DMA API that exist in common code that we + * don't necessarily want to go out of our way to break, so we still + * allow for some compatability at that level. Any new code is strongly + * advised to run far away from the ISA DMA API and use the SH DMA API + * directly. */ - -unsigned long __deprecated claim_dma_lock(void) +unsigned long claim_dma_lock(void) { unsigned long flags; @@ -42,19 +42,19 @@ unsigned long __deprecated claim_dma_lock(void) } EXPORT_SYMBOL(claim_dma_lock); -void __deprecated release_dma_lock(unsigned long flags) +void release_dma_lock(unsigned long flags) { spin_unlock_irqrestore(&dma_spin_lock, flags); } EXPORT_SYMBOL(release_dma_lock); -void __deprecated disable_dma(unsigned int chan) +void disable_dma(unsigned int chan) { /* Nothing */ } EXPORT_SYMBOL(disable_dma); -void __deprecated enable_dma(unsigned int chan) +void enable_dma(unsigned int chan) { struct dma_info *info = get_dma_info(chan); struct dma_channel *channel = &info->channels[chan]; diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index 2e1d58f2d1b..df604975ccc 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -80,7 +80,7 @@ static struct dma_ops pvr2_dma_ops = { }; static struct dma_info pvr2_dma_info = { - .name = "PowerVR 2 DMA", + .name = "pvr2_dmac", .nr_channels = 1, .ops = &pvr2_dma_ops, .flags = DMAC_CHANNELS_TEI_CAPABLE, @@ -98,6 +98,7 @@ static void __exit pvr2_dma_exit(void) { free_dma(PVR2_CASCADE_CHAN); free_irq(HW_EVENT_PVR2_DMA, 0); + unregister_dmac(&pvr2_dma_info); } subsys_initcall(pvr2_dma_init); diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 31dacd4444b..cca26c4c9d1 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -5,6 +5,7 @@ * * Copyright (C) 2000 Takashi YOSHII * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2005 Andriy Skulysh * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -16,51 +17,28 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <asm/dreamcast/dma.h> #include <asm/signal.h> #include <asm/irq.h> #include <asm/dma.h> #include <asm/io.h> #include "dma-sh.h" -/* - * The SuperH DMAC supports a number of transmit sizes, we list them here, - * with their respective values as they appear in the CHCR registers. - * - * Defaults to a 64-bit transfer size. - */ -enum { - XMIT_SZ_64BIT, - XMIT_SZ_8BIT, - XMIT_SZ_16BIT, - XMIT_SZ_32BIT, - XMIT_SZ_256BIT, -}; - -/* - * The DMA count is defined as the number of bytes to transfer. - */ -static unsigned int ts_shift[] = { - [XMIT_SZ_64BIT] = 3, - [XMIT_SZ_8BIT] = 0, - [XMIT_SZ_16BIT] = 1, - [XMIT_SZ_32BIT] = 2, - [XMIT_SZ_256BIT] = 5, -}; - static inline unsigned int get_dmte_irq(unsigned int chan) { - unsigned int irq; + unsigned int irq = 0; /* * Normally we could just do DMTE0_IRQ + chan outright, though in the * case of the 7751R, the DMTE IRQs for channels > 4 start right above * the SCIF */ - if (chan < 4) { irq = DMTE0_IRQ + chan; } else { +#ifdef DMTE4_IRQ irq = DMTE4_IRQ + chan - 4; +#endif } return irq; @@ -78,9 +56,7 @@ static inline unsigned int calc_xmit_shift(struct dma_channel *chan) { u32 chcr = ctrl_inl(CHCR[chan->chan]); - chcr >>= 4; - - return ts_shift[chcr & 0x0007]; + return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT]; } /* @@ -109,8 +85,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id, struct pt_regs *regs) static int sh_dmac_request_dma(struct dma_channel *chan) { + char name[32]; + + snprintf(name, sizeof(name), "DMAC Transfer End (Channel %d)", + chan->chan); + return request_irq(get_dmte_irq(chan->chan), dma_tei, - SA_INTERRUPT, "DMAC Transfer End", chan); + SA_INTERRUPT, name, chan); } static void sh_dmac_free_dma(struct dma_channel *chan) @@ -118,10 +99,18 @@ static void sh_dmac_free_dma(struct dma_channel *chan) free_irq(get_dmte_irq(chan->chan), chan); } -static void sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) +static void +sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) { if (!chcr) - chcr = RS_DUAL; + chcr = RS_DUAL | CHCR_IE; + + if (chcr & CHCR_IE) { + chcr &= ~CHCR_IE; + chan->flags |= DMA_TEI_CAPABLE; + } else { + chan->flags &= ~DMA_TEI_CAPABLE; + } ctrl_outl(chcr, CHCR[chan->chan]); @@ -130,22 +119,32 @@ static void sh_dmac_configure_channel(struct dma_channel *chan, unsigned long ch static void sh_dmac_enable_dma(struct dma_channel *chan) { - int irq = get_dmte_irq(chan->chan); + int irq; u32 chcr; chcr = ctrl_inl(CHCR[chan->chan]); - chcr |= CHCR_DE | CHCR_IE; + chcr |= CHCR_DE; + + if (chan->flags & DMA_TEI_CAPABLE) + chcr |= CHCR_IE; + ctrl_outl(chcr, CHCR[chan->chan]); - enable_irq(irq); + if (chan->flags & DMA_TEI_CAPABLE) { + irq = get_dmte_irq(chan->chan); + enable_irq(irq); + } } static void sh_dmac_disable_dma(struct dma_channel *chan) { - int irq = get_dmte_irq(chan->chan); + int irq; u32 chcr; - disable_irq(irq); + if (chan->flags & DMA_TEI_CAPABLE) { + irq = get_dmte_irq(chan->chan); + disable_irq(irq); + } chcr = ctrl_inl(CHCR[chan->chan]); chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE); @@ -158,7 +157,7 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan) * If we haven't pre-configured the channel with special flags, use * the defaults. */ - if (!(chan->flags & DMA_CONFIGURED)) + if (unlikely(!(chan->flags & DMA_CONFIGURED))) sh_dmac_configure_channel(chan, 0); sh_dmac_disable_dma(chan); @@ -178,9 +177,11 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan) * cascading to the PVR2 DMAC. In this case, we still need to write * SAR and DAR, regardless of value, in order for cascading to work. */ - if (chan->sar || (mach_is_dreamcast() && chan->chan == 2)) + if (chan->sar || (mach_is_dreamcast() && + chan->chan == PVR2_CASCADE_CHAN)) ctrl_outl(chan->sar, SAR[chan->chan]); - if (chan->dar || (mach_is_dreamcast() && chan->chan == 2)) + if (chan->dar || (mach_is_dreamcast() && + chan->chan == PVR2_CASCADE_CHAN)) ctrl_outl(chan->dar, DAR[chan->chan]); ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]); @@ -198,17 +199,38 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan) return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan); } -#if defined(CONFIG_CPU_SH4) -static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs) +#ifdef CONFIG_CPU_SUBTYPE_SH7780 +#define dmaor_read_reg() ctrl_inw(DMAOR) +#define dmaor_write_reg(data) ctrl_outw(data, DMAOR) +#else +#define dmaor_read_reg() ctrl_inl(DMAOR) +#define dmaor_write_reg(data) ctrl_outl(data, DMAOR) +#endif + +static inline int dmaor_reset(void) { - unsigned long dmaor = ctrl_inl(DMAOR); + unsigned long dmaor = dmaor_read_reg(); + + /* Try to clear the error flags first, incase they are set */ + dmaor &= ~(DMAOR_NMIF | DMAOR_AE); + dmaor_write_reg(dmaor); - printk("DMAE: DMAOR=%lx\n", dmaor); + dmaor |= DMAOR_INIT; + dmaor_write_reg(dmaor); - ctrl_outl(ctrl_inl(DMAOR)&~DMAOR_NMIF, DMAOR); - ctrl_outl(ctrl_inl(DMAOR)&~DMAOR_AE, DMAOR); - ctrl_outl(ctrl_inl(DMAOR)|DMAOR_DME, DMAOR); + /* See if we got an error again */ + if ((dmaor_read_reg() & (DMAOR_AE | DMAOR_NMIF))) { + printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n"); + return -EINVAL; + } + return 0; +} + +#if defined(CONFIG_CPU_SH4) +static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs) +{ + dmaor_reset(); disable_irq(irq); return IRQ_HANDLED; @@ -224,8 +246,8 @@ static struct dma_ops sh_dmac_ops = { }; static struct dma_info sh_dmac_info = { - .name = "SuperH DMAC", - .nr_channels = 4, + .name = "sh_dmac", + .nr_channels = CONFIG_NR_ONCHIP_DMA_CHANNELS, .ops = &sh_dmac_ops, .flags = DMAC_CHANNELS_TEI_CAPABLE, }; @@ -248,7 +270,13 @@ static int __init sh_dmac_init(void) make_ipr_irq(irq, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); } - ctrl_outl(0x8000 | DMAOR_DME, DMAOR); + /* + * Initialize DMAOR, and clean up any error flags that may have + * been set. + */ + i = dmaor_reset(); + if (i < 0) + return i; return register_dmac(info); } @@ -258,10 +286,12 @@ static void __exit sh_dmac_exit(void) #ifdef CONFIG_CPU_SH4 free_irq(DMAE_IRQ, 0); #endif + unregister_dmac(&sh_dmac_info); } subsys_initcall(sh_dmac_init); module_exit(sh_dmac_exit); +MODULE_AUTHOR("Takashi YOSHII, Paul Mundt, Andriy Skulysh"); +MODULE_DESCRIPTION("SuperH On-Chip DMAC Support"); MODULE_LICENSE("GPL"); - diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h index dd9d547539a..0f591fbc922 100644 --- a/arch/sh/drivers/dma/dma-sh.h +++ b/arch/sh/drivers/dma/dma-sh.h @@ -11,6 +11,8 @@ #ifndef __DMA_SH_H #define __DMA_SH_H +#include <asm/cpu/dma.h> + /* Definitions for the SuperH DMAC */ #define REQ_L 0x00000000 #define REQ_E 0x00080000 @@ -26,27 +28,47 @@ #define SM_DEC 0x00002000 #define RS_IN 0x00000200 #define RS_OUT 0x00000300 -#define TM_BURST 0x0000080 -#define TS_8 0x00000010 -#define TS_16 0x00000020 -#define TS_32 0x00000030 -#define TS_64 0x00000000 #define TS_BLK 0x00000040 #define CHCR_DE 0x00000001 #define CHCR_TE 0x00000002 #define CHCR_IE 0x00000004 -/* Define the default configuration for dual address memory-memory transfer. - * The 0x400 value represents auto-request, external->external. - */ -#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32) - -#define DMAOR_COD 0x00000008 +/* DMAOR definitions */ #define DMAOR_AE 0x00000004 #define DMAOR_NMIF 0x00000002 #define DMAOR_DME 0x00000001 +/* + * Define the default configuration for dual address memory-memory transfer. + * The 0x400 value represents auto-request, external->external. + */ +#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32) + #define MAX_DMAC_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) +/* + * Subtypes that have fewer channels than this simply need to change + * CONFIG_NR_ONCHIP_DMA_CHANNELS. Likewise, subtypes with a larger number + * of channels should expand on this. + * + * For most subtypes we can easily figure these values out with some + * basic calculation, unfortunately on other subtypes these are more + * scattered, so we just leave it unrolled for simplicity. + */ +#define SAR ((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \ + SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30, \ + SH_DMAC_BASE + 0x50, SH_DMAC_BASE + 0x60}) +#define DAR ((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \ + SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34, \ + SH_DMAC_BASE + 0x54, SH_DMAC_BASE + 0x64}) +#define DMATCR ((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \ + SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38, \ + SH_DMAC_BASE + 0x58, SH_DMAC_BASE + 0x68}) +#define CHCR ((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \ + SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c, \ + SH_DMAC_BASE + 0x5c, SH_DMAC_BASE + 0x6c}) + +#define DMAOR (SH_DMAC_BASE + 0x40) + #endif /* __DMA_SH_H */ diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c index 6e3b58bd879..70a5d82eb2f 100644 --- a/arch/sh/drivers/dma/dma-sysfs.c +++ b/arch/sh/drivers/dma/dma-sysfs.c @@ -3,7 +3,7 @@ * * sysfs interface for SH DMA API * - * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2004, 2005 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -12,7 +12,9 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/sysdev.h> +#include <linux/platform_device.h> #include <linux/module.h> +#include <linux/err.h> #include <linux/string.h> #include <asm/dma.h> @@ -77,7 +79,7 @@ static ssize_t dma_store_config(struct sys_device *dev, unsigned long config; config = simple_strtoul(buf, NULL, 0); - dma_configure_channel(channel->chan, config); + dma_configure_channel(channel->vchan, config); return count; } @@ -111,12 +113,13 @@ static SYSDEV_ATTR(field, S_IRUGO, dma_show_##field, NULL); dma_ro_attr(count, "0x%08x\n"); dma_ro_attr(flags, "0x%08lx\n"); -int __init dma_create_sysfs_files(struct dma_channel *chan) +int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info) { struct sys_device *dev = &chan->dev; + char name[16]; int ret; - dev->id = chan->chan; + dev->id = chan->vchan; dev->cls = &dma_sysclass; ret = sysdev_register(dev); @@ -129,6 +132,24 @@ int __init dma_create_sysfs_files(struct dma_channel *chan) sysdev_create_file(dev, &attr_flags); sysdev_create_file(dev, &attr_config); - return 0; + snprintf(name, sizeof(name), "dma%d", chan->chan); + return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name); +} + +void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info) +{ + struct sys_device *dev = &chan->dev; + char name[16]; + + sysdev_remove_file(dev, &attr_dev_id); + sysdev_remove_file(dev, &attr_count); + sysdev_remove_file(dev, &attr_mode); + sysdev_remove_file(dev, &attr_flags); + sysdev_remove_file(dev, &attr_config); + + snprintf(name, sizeof(name), "dma%d", chan->chan); + sysfs_remove_link(&info->pdev->dev.kobj, name); + + sysdev_unregister(dev); } diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 8b819698df1..7a86eeb2265 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -17,6 +17,4 @@ obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - -USE_STANDARD_AS_RULE := true - +obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index cd43714df61..5bfc33bec5d 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -2,15 +2,12 @@ # Makefile for the Linux/SuperH CPU-specifc backends. # -obj-y := irq_ipr.o irq_imask.o init.o bus.o +obj-y += irq/ init.o bus.o clock.o obj-$(CONFIG_CPU_SH2) += sh2/ obj-$(CONFIG_CPU_SH3) += sh3/ obj-$(CONFIG_CPU_SH4) += sh4/ -obj-$(CONFIG_SH_RTC) += rtc.o +obj-$(CONFIG_SH_RTC) += rtc.o obj-$(CONFIG_UBC_WAKEUP) += ubc.o -obj-$(CONFIG_SH_ADC) += adc.o - -USE_STANDARD_AS_RULE := true - +obj-$(CONFIG_SH_ADC) += adc.o diff --git a/arch/sh/kernel/cpu/bus.c b/arch/sh/kernel/cpu/bus.c index d4fee2a7937..fc6c4bd40c6 100644 --- a/arch/sh/kernel/cpu/bus.c +++ b/arch/sh/kernel/cpu/bus.c @@ -53,21 +53,6 @@ static int sh_bus_resume(struct device *dev) return 0; } -static struct device sh_bus_devices[SH_NR_BUSES] = { - { - .bus_id = SH_BUS_NAME_VIRT, - }, -}; - -struct bus_type sh_bus_types[SH_NR_BUSES] = { - { - .name = SH_BUS_NAME_VIRT, - .match = sh_bus_match, - .suspend = sh_bus_suspend, - .resume = sh_bus_resume, - }, -}; - static int sh_device_probe(struct device *dev) { struct sh_dev *shdev = to_sh_dev(dev); @@ -90,6 +75,23 @@ static int sh_device_remove(struct device *dev) return 0; } +static struct device sh_bus_devices[SH_NR_BUSES] = { + { + .bus_id = SH_BUS_NAME_VIRT, + }, +}; + +struct bus_type sh_bus_types[SH_NR_BUSES] = { + { + .name = SH_BUS_NAME_VIRT, + .match = sh_bus_match, + .probe = sh_bus_probe, + .remove = sh_bus_remove, + .suspend = sh_bus_suspend, + .resume = sh_bus_resume, + }, +}; + int sh_device_register(struct sh_dev *dev) { if (!dev) @@ -107,6 +109,8 @@ int sh_device_register(struct sh_dev *dev) /* This is needed for USB OHCI to work */ if (dev->dma_mask) dev->dev.dma_mask = dev->dma_mask; + if (dev->coherent_dma_mask) + dev->dev.coherent_dma_mask = dev->coherent_dma_mask; snprintf(dev->dev.bus_id, BUS_ID_SIZE, "%s%u", dev->name, dev->dev_id); @@ -133,8 +137,6 @@ int sh_driver_register(struct sh_driver *drv) return -EINVAL; } - drv->drv.probe = sh_device_probe; - drv->drv.remove = sh_device_remove; drv->drv.bus = &sh_bus_types[drv->bus_id]; return driver_register(&drv->drv); diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c new file mode 100644 index 00000000000..989e7fdd524 --- /dev/null +++ b/arch/sh/kernel/cpu/clock.c @@ -0,0 +1,287 @@ +/* + * arch/sh/kernel/cpu/clock.c - SuperH clock framework + * + * Copyright (C) 2005 Paul Mundt + * + * This clock framework is derived from the OMAP version by: + * + * Copyright (C) 2004 Nokia Corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/kref.h> +#include <linux/seq_file.h> +#include <linux/err.h> +#include <asm/clock.h> +#include <asm/timer.h> + +static LIST_HEAD(clock_list); +static DEFINE_SPINLOCK(clock_lock); +static DECLARE_MUTEX(clock_list_sem); + +/* + * Each subtype is expected to define the init routines for these clocks, + * as each subtype (or processor family) will have these clocks at the + * very least. These are all provided through the CPG, which even some of + * the more quirky parts (such as ST40, SH4-202, etc.) still have. + * + * The processor-specific code is expected to register any additional + * clock sources that are of interest. + */ +static struct clk master_clk = { + .name = "master_clk", + .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, +#ifdef CONFIG_SH_PCLK_FREQ_BOOL + .rate = CONFIG_SH_PCLK_FREQ, +#endif +}; + +static struct clk module_clk = { + .name = "module_clk", + .parent = &master_clk, + .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, +}; + +static struct clk bus_clk = { + .name = "bus_clk", + .parent = &master_clk, + .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, +}; + +static struct clk cpu_clk = { + .name = "cpu_clk", + .parent = &master_clk, + .flags = CLK_ALWAYS_ENABLED, +}; + +/* + * The ordering of these clocks matters, do not change it. + */ +static struct clk *onchip_clocks[] = { + &master_clk, + &module_clk, + &bus_clk, + &cpu_clk, +}; + +static void propagate_rate(struct clk *clk) +{ + struct clk *clkp; + + list_for_each_entry(clkp, &clock_list, node) { + if (likely(clkp->parent != clk)) + continue; + if (likely(clkp->ops && clkp->ops->recalc)) + clkp->ops->recalc(clkp); + } +} + +int __clk_enable(struct clk *clk) +{ + /* + * See if this is the first time we're enabling the clock, some + * clocks that are always enabled still require "special" + * initialization. This is especially true if the clock mode + * changes and the clock needs to hunt for the proper set of + * divisors to use before it can effectively recalc. + */ + if (unlikely(atomic_read(&clk->kref.refcount) == 1)) + if (clk->ops && clk->ops->init) + clk->ops->init(clk); + + if (clk->flags & CLK_ALWAYS_ENABLED) + return 0; + + if (likely(clk->ops && clk->ops->enable)) + clk->ops->enable(clk); + + kref_get(&clk->kref); + return 0; +} + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&clock_lock, flags); + ret = __clk_enable(clk); + spin_unlock_irqrestore(&clock_lock, flags); + + return ret; +} + +static void clk_kref_release(struct kref *kref) +{ + /* Nothing to do */ +} + +void __clk_disable(struct clk *clk) +{ + if (clk->flags & CLK_ALWAYS_ENABLED) + return; + + kref_put(&clk->kref, clk_kref_release); +} + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clock_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clock_lock, flags); +} + +int clk_register(struct clk *clk) +{ + down(&clock_list_sem); + + list_add(&clk->node, &clock_list); + kref_init(&clk->kref); + + up(&clock_list_sem); + + return 0; +} + +void clk_unregister(struct clk *clk) +{ + down(&clock_list_sem); + list_del(&clk->node); + up(&clock_list_sem); +} + +inline unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EOPNOTSUPP; + + if (likely(clk->ops && clk->ops->set_rate)) { + unsigned long flags; + + spin_lock_irqsave(&clock_lock, flags); + ret = clk->ops->set_rate(clk, rate); + spin_unlock_irqrestore(&clock_lock, flags); + } + + if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clk); + + return ret; +} + +void clk_recalc_rate(struct clk *clk) +{ + if (likely(clk->ops && clk->ops->recalc)) { + unsigned long flags; + + spin_lock_irqsave(&clock_lock, flags); + clk->ops->recalc(clk); + spin_unlock_irqrestore(&clock_lock, flags); + } + + if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clk); +} + +struct clk *clk_get(const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + down(&clock_list_sem); + list_for_each_entry(p, &clock_list, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + up(&clock_list_sem); + + return clk; +} + +void clk_put(struct clk *clk) +{ + if (clk && !IS_ERR(clk)) + module_put(clk->owner); +} + +void __init __attribute__ ((weak)) +arch_init_clk_ops(struct clk_ops **ops, int type) +{ +} + +int __init clk_init(void) +{ + int i, ret = 0; + + if (unlikely(!master_clk.rate)) + /* + * NOTE: This will break if the default divisor has been + * changed. + * + * No one should be changing the default on us however, + * expect that a sane value for CONFIG_SH_PCLK_FREQ will + * be defined in the event of a different divisor. + */ + master_clk.rate = get_timer_frequency() * 4; + + for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) { + struct clk *clk = onchip_clocks[i]; + + arch_init_clk_ops(&clk->ops, i); + ret |= clk_register(clk); + clk_enable(clk); + } + + /* Kick the child clocks.. */ + propagate_rate(&master_clk); + propagate_rate(&bus_clk); + + return ret; +} + +int show_clocks(struct seq_file *m) +{ + struct clk *clk; + + list_for_each_entry_reverse(clk, &clock_list, node) { + unsigned long rate = clk_get_rate(clk); + + /* + * Don't bother listing dummy clocks with no ancestry + * that only support enable and disable ops. + */ + if (unlikely(!rate && !clk->parent)) + continue; + + seq_printf(m, "%-12s\t: %ld.%02ldMHz\n", clk->name, + rate / 1000000, (rate % 1000000) / 10000); + } + + return 0; +} + +EXPORT_SYMBOL_GPL(clk_register); +EXPORT_SYMBOL_GPL(clk_unregister); +EXPORT_SYMBOL_GPL(clk_get); +EXPORT_SYMBOL_GPL(clk_put); +EXPORT_SYMBOL_GPL(clk_enable); +EXPORT_SYMBOL_GPL(clk_disable); +EXPORT_SYMBOL_GPL(__clk_enable); +EXPORT_SYMBOL_GPL(__clk_disable); +EXPORT_SYMBOL_GPL(clk_get_rate); +EXPORT_SYMBOL_GPL(clk_set_rate); +EXPORT_SYMBOL_GPL(clk_recalc_rate); diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile new file mode 100644 index 00000000000..e3cccea15e1 --- /dev/null +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the Linux/SuperH CPU-specifc IRQ handlers. +# +obj-y += ipr.o imask.o + +obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o +obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o diff --git a/arch/sh/kernel/cpu/irq_imask.c b/arch/sh/kernel/cpu/irq/imask.c index a963d00a971..baed9a550d3 100644 --- a/arch/sh/kernel/cpu/irq_imask.c +++ b/arch/sh/kernel/cpu/irq/imask.c @@ -1,16 +1,12 @@ -/* $Id: irq_imask.c,v 1.1.2.1 2002/11/17 10:53:43 mrbrown Exp $ - * - * linux/arch/sh/kernel/irq_imask.c +/* + * arch/sh/kernel/cpu/irq/imask.c * * Copyright (C) 1999, 2000 Niibe Yutaka * * Simple interrupt handling using IMASK of SR register. * */ - /* NOTE: Will not work on level 15 */ - - #include <linux/ptrace.h> #include <linux/errno.h> #include <linux/kernel_stat.h> @@ -19,13 +15,11 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <linux/bitops.h> - -#include <asm/system.h> -#include <asm/irq.h> - #include <linux/spinlock.h> #include <linux/cache.h> #include <linux/irq.h> +#include <asm/system.h> +#include <asm/irq.h> /* Bitmap of IRQ masked */ static unsigned long imask_mask = 0x7fff; @@ -40,7 +34,7 @@ static void end_imask_irq(unsigned int irq); #define IMASK_PRIORITY 15 static unsigned int startup_imask_irq(unsigned int irq) -{ +{ /* Nothing to do */ return 0; /* never anything pending */ } diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c new file mode 100644 index 00000000000..06e8afab32e --- /dev/null +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -0,0 +1,284 @@ +/* + * Interrupt handling for INTC2-based IRQ. + * + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * Copyright (C) 2005, 2006 Paul Mundt (lethal@linux-sh.org) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * These are the "new Hitachi style" interrupts, as present on the + * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/machvec.h> + +struct intc2_data { + unsigned char msk_offset; + unsigned char msk_shift; + + int (*clear_irq) (int); +}; + +static struct intc2_data intc2_data[NR_INTC2_IRQS]; + +static void enable_intc2_irq(unsigned int irq); +static void disable_intc2_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_intc2_irq disable_intc2_irq + +static void mask_and_ack_intc2(unsigned int); +static void end_intc2_irq(unsigned int irq); + +static unsigned int startup_intc2_irq(unsigned int irq) +{ + enable_intc2_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type intc2_irq_type = { + .typename = "INTC2-IRQ", + .startup = startup_intc2_irq, + .shutdown = shutdown_intc2_irq, + .enable = enable_intc2_irq, + .disable = disable_intc2_irq, + .ack = mask_and_ack_intc2, + .end = end_intc2_irq +}; + +static void disable_intc2_irq(unsigned int irq) +{ + int irq_offset = irq - INTC2_FIRST_IRQ; + int msk_shift, msk_offset; + + /* Sanity check */ + if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) + return; + + msk_shift = intc2_data[irq_offset].msk_shift; + msk_offset = intc2_data[irq_offset].msk_offset; + + ctrl_outl(1 << msk_shift, + INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset); +} + +static void enable_intc2_irq(unsigned int irq) +{ + int irq_offset = irq - INTC2_FIRST_IRQ; + int msk_shift, msk_offset; + + /* Sanity check */ + if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) + return; + + msk_shift = intc2_data[irq_offset].msk_shift; + msk_offset = intc2_data[irq_offset].msk_offset; + + ctrl_outl(1 << msk_shift, + INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset); +} + +static void mask_and_ack_intc2(unsigned int irq) +{ + disable_intc2_irq(irq); +} + +static void end_intc2_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_intc2_irq(irq); + + if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq)) + intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq); +} + +/* + * Setup an INTC2 style interrupt. + * NOTE: Unlike IPR interrupts, parameters are not shifted by this code, + * allowing the use of the numbers straight out of the datasheet. + * For example: + * PIO1 which is INTPRI00[19,16] and INTMSK00[13] + * would be: ^ ^ ^ ^ + * | | | | + * make_intc2_irq(84, 0, 16, 0, 13); + */ +void make_intc2_irq(unsigned int irq, + unsigned int ipr_offset, unsigned int ipr_shift, + unsigned int msk_offset, unsigned int msk_shift, + unsigned int priority) +{ + int irq_offset = irq - INTC2_FIRST_IRQ; + unsigned int flags; + unsigned long ipr; + + if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) + return; + + disable_irq_nosync(irq); + + /* Fill the data we need */ + intc2_data[irq_offset].msk_offset = msk_offset; + intc2_data[irq_offset].msk_shift = msk_shift; + intc2_data[irq_offset].clear_irq = NULL; + + /* Set the priority level */ + local_irq_save(flags); + + ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset); + ipr &= ~(0xf << ipr_shift); + ipr |= priority << ipr_shift; + ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset); + + local_irq_restore(flags); + + irq_desc[irq].handler = &intc2_irq_type; + + disable_intc2_irq(irq); +} + +static struct intc2_init { + unsigned short irq; + unsigned char ipr_offset, ipr_shift; + unsigned char msk_offset, msk_shift; + unsigned char priority; +} intc2_init_data[] __initdata = { +#if defined(CONFIG_CPU_SUBTYPE_ST40) + {64, 0, 0, 0, 0, 13}, /* PCI serr */ + {65, 0, 4, 0, 1, 13}, /* PCI err */ + {66, 0, 4, 0, 2, 13}, /* PCI ad */ + {67, 0, 4, 0, 3, 13}, /* PCI pwd down */ + {72, 0, 8, 0, 5, 13}, /* DMAC INT0 */ + {73, 0, 8, 0, 6, 13}, /* DMAC INT1 */ + {74, 0, 8, 0, 7, 13}, /* DMAC INT2 */ + {75, 0, 8, 0, 8, 13}, /* DMAC INT3 */ + {76, 0, 8, 0, 9, 13}, /* DMAC INT4 */ + {78, 0, 8, 0, 11, 13}, /* DMAC ERR */ + {80, 0, 12, 0, 12, 13}, /* PIO0 */ + {84, 0, 16, 0, 13, 13}, /* PIO1 */ + {88, 0, 20, 0, 14, 13}, /* PIO2 */ + {112, 4, 0, 4, 0, 13}, /* Mailbox */ + #ifdef CONFIG_CPU_SUBTYPE_ST40GX1 + {116, 4, 4, 4, 4, 13}, /* SSC0 */ + {120, 4, 8, 4, 8, 13}, /* IR Blaster */ + {124, 4, 12, 4, 12, 13}, /* USB host */ + {128, 4, 16, 4, 16, 13}, /* Video processor BLITTER */ + {132, 4, 20, 4, 20, 13}, /* UART0 */ + {134, 4, 20, 4, 22, 13}, /* UART2 */ + {136, 4, 24, 4, 24, 13}, /* IO_PIO0 */ + {140, 4, 28, 4, 28, 13}, /* EMPI */ + {144, 8, 0, 8, 0, 13}, /* MAFE */ + {148, 8, 4, 8, 4, 13}, /* PWM */ + {152, 8, 8, 8, 8, 13}, /* SSC1 */ + {156, 8, 12, 8, 12, 13}, /* IO_PIO1 */ + {160, 8, 16, 8, 16, 13}, /* USB target */ + {164, 8, 20, 8, 20, 13}, /* UART1 */ + {168, 8, 24, 8, 24, 13}, /* Teletext */ + {172, 8, 28, 8, 28, 13}, /* VideoSync VTG */ + {173, 8, 28, 8, 29, 13}, /* VideoSync DVP0 */ + {174, 8, 28, 8, 30, 13}, /* VideoSync DVP1 */ +#endif +#elif defined(CONFIG_CPU_SUBTYPE_SH7760) +/* + * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0 + */ + /* INTPRIO0 | INTMSK0 */ + {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ + {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ + {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ + {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ + /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */ + /* INTPRIO4 | INTMSK0 */ + {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ + {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ + {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ + {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */ + {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */ + {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ + {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ + {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ + /* INTPRIO8 | INTMSK0 */ + {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ + {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ + {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ + {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ + {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ + {65, 8, 24, 0, 16, 3}, /* LCDC */ + /* 66, 67 unused */ + {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ + {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ + {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ + /* 71 unused */ + {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ + {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ + {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ + {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */ + {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */ + {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ + {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ + {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ + /* | INTMSK4 */ + {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ + {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ + {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ + {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ + {84, 8, 0, 4, 19, 3}, /* HSPII */ + /* INTPRIOC | INTMSK4 */ + /* 85-87 unused/reserved */ + {88, 12, 20, 4, 18, 3}, /* MMCI0 */ + {89, 12, 20, 4, 17, 3}, /* MMCI1 */ + {90, 12, 20, 4, 16, 3}, /* MMCI2 */ + {91, 12, 20, 4, 15, 3}, /* MMCI3 */ + {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/ + /* 93-107 reserved/undocumented */ + {108,12, 4, 4, 1, 3}, /* ADC */ + {109,12, 0, 4, 0, 3}, /* CMTI */ + /* 110-111 reserved/unused */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) + { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2}, +#ifdef CONFIG_SH_RTC + { RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, +#endif + { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + + { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + + { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY }, + { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY }, + { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY }, + { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY }, + { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY }, +#endif +}; + +void __init init_IRQ_intc2(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) { + struct intc2_init *p = intc2_init_data + i; + make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift, + p-> msk_offset, p->msk_shift, p->priority); + } +} + +/* Adds a termination callback to the interrupt */ +void intc2_add_clear_irq(int irq, int (*fn)(int)) +{ + if (unlikely(irq < INTC2_FIRST_IRQ)) + return; + + intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn; +} + diff --git a/arch/sh/kernel/cpu/irq_ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index 71f92096132..fdbd718ae5c 100644 --- a/arch/sh/kernel/cpu/irq_ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -1,6 +1,5 @@ -/* $Id: irq_ipr.c,v 1.1.2.1 2002/11/17 10:53:43 mrbrown Exp $ - * - * linux/arch/sh/kernel/irq_ipr.c +/* + * arch/sh/kernel/cpu/irq/ipr.c * * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi * Copyright (C) 2000 Kazumoto Kojima @@ -109,7 +108,8 @@ static void end_ipr_irq(unsigned int irq) enable_ipr_irq(irq); } -void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority) +void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, + int priority, int maskpos) { disable_irq_nosync(irq); ipr_data[irq].addr = addr; @@ -120,126 +120,47 @@ void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority) disable_ipr_irq(irq); } -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -static unsigned char pint_map[256]; -static unsigned long portcr_mask = 0; - -static void enable_pint_irq(unsigned int irq); -static void disable_pint_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_pint_irq disable_pint_irq - -static void mask_and_ack_pint(unsigned int); -static void end_pint_irq(unsigned int irq); - -static unsigned int startup_pint_irq(unsigned int irq) -{ - enable_pint_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type pint_irq_type = { - .typename = "PINT-IRQ", - .startup = startup_pint_irq, - .shutdown = shutdown_pint_irq, - .enable = enable_pint_irq, - .disable = disable_pint_irq, - .ack = mask_and_ack_pint, - .end = end_pint_irq -}; - -static void disable_pint_irq(unsigned int irq) -{ - unsigned long val, flags; - - local_irq_save(flags); - val = ctrl_inw(INTC_INTER); - val &= ~(1 << (irq - PINT_IRQ_BASE)); - ctrl_outw(val, INTC_INTER); /* disable PINTn */ - portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2); - local_irq_restore(flags); -} - -static void enable_pint_irq(unsigned int irq) -{ - unsigned long val, flags; - - local_irq_save(flags); - val = ctrl_inw(INTC_INTER); - val |= 1 << (irq - PINT_IRQ_BASE); - ctrl_outw(val, INTC_INTER); /* enable PINTn */ - portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2; - local_irq_restore(flags); -} - -static void mask_and_ack_pint(unsigned int irq) -{ - disable_pint_irq(irq); -} - -static void end_pint_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_pint_irq(irq); -} - -void make_pint_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].handler = &pint_irq_type; - disable_pint_irq(irq); -} -#endif - void __init init_IRQ(void) { -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) - int i; -#endif - - make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY); - make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY); +#ifndef CONFIG_CPU_SUBTYPE_SH7780 + make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY, 0); + make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY, 0); #if defined(CONFIG_SH_RTC) - make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY); + make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY, 0); #endif #ifdef SCI_ERI_IRQ - make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); - make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); - make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); + make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0); + make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0); + make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0); #endif #ifdef SCIF1_ERI_IRQ - make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); + make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); + make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); + make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); + make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); #endif #if defined(CONFIG_CPU_SUBTYPE_SH7300) - make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY, 0); + make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0); + make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0); + make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY, 0); #endif #ifdef SCIF_ERI_IRQ - make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); + make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); + make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); + make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); + make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); #endif #ifdef IRDA_ERI_IRQ - make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); + make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); + make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); + make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); + make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ @@ -254,86 +175,32 @@ void __init init_IRQ(void) * You should set corresponding bits of PFC to "00" * to enable these interrupts. */ - make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY); - make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY); - make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY); - make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY); - make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY); - make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY); -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) - make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY); - make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY); - enable_ipr_irq(PINT0_IRQ); - enable_ipr_irq(PINT8_IRQ); + make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY, 0); + make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY, 0); + make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY, 0); + make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY, 0); + make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY, 0); + make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY, 0); +#endif +#endif - for(i = 0; i < 16; i++) - make_pint_irq(PINT_IRQ_BASE + i); - for(i = 0; i < 256; i++) - { - if(i & 1) pint_map[i] = 0; - else if(i & 2) pint_map[i] = 1; - else if(i & 4) pint_map[i] = 2; - else if(i & 8) pint_map[i] = 3; - else if(i & 0x10) pint_map[i] = 4; - else if(i & 0x20) pint_map[i] = 5; - else if(i & 0x40) pint_map[i] = 6; - else if(i & 0x80) pint_map[i] = 7; - } -#endif /* !CONFIG_CPU_SUBTYPE_SH7300 */ -#endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 || CONFIG_CPU_SUBTYPE_SH7300*/ +#ifdef CONFIG_CPU_HAS_PINT_IRQ + init_IRQ_pint(); +#endif -#ifdef CONFIG_CPU_SUBTYPE_ST40 +#ifdef CONFIG_CPU_HAS_INTC2_IRQ init_IRQ_intc2(); #endif - /* Perform the machine specific initialisation */ - if (sh_mv.mv_init_irq != NULL) { + if (sh_mv.mv_init_irq != NULL) sh_mv.mv_init_irq(); - } } -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) + +#if !defined(CONFIG_CPU_HAS_PINT_IRQ) int ipr_irq_demux(int irq) { -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) - unsigned long creg, dreg, d, sav; - - if(irq == PINT0_IRQ) - { -#if defined(CONFIG_CPU_SUBTYPE_SH7707) - creg = PORT_PACR; - dreg = PORT_PADR; -#else - creg = PORT_PCCR; - dreg = PORT_PCDR; -#endif - sav = ctrl_inw(creg); - ctrl_outw(sav | portcr_mask, creg); - d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) & ctrl_inw(INTC_INTER) & 0xff; - ctrl_outw(sav, creg); - if(d == 0) return irq; - return PINT_IRQ_BASE + pint_map[d]; - } - else if(irq == PINT8_IRQ) - { -#if defined(CONFIG_CPU_SUBTYPE_SH7707) - creg = PORT_PBCR; - dreg = PORT_PBDR; -#else - creg = PORT_PFCR; - dreg = PORT_PFDR; -#endif - sav = ctrl_inw(creg); - ctrl_outw(sav | (portcr_mask >> 16), creg); - d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) & (ctrl_inw(INTC_INTER) >> 8) & 0xff; - ctrl_outw(sav, creg); - if(d == 0) return irq; - return PINT_IRQ_BASE + 8 + pint_map[d]; - } -#endif return irq; } #endif EXPORT_SYMBOL(make_ipr_irq); - diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c new file mode 100644 index 00000000000..95d6024fe1a --- /dev/null +++ b/arch/sh/kernel/cpu/irq/pint.c @@ -0,0 +1,169 @@ +/* + * arch/sh/kernel/cpu/irq/pint.c - Interrupt handling for PINT-based IRQs. + * + * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi + * Copyright (C) 2000 Kazumoto Kojima + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/module.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/machvec.h> + +static unsigned char pint_map[256]; +static unsigned long portcr_mask; + +static void enable_pint_irq(unsigned int irq); +static void disable_pint_irq(unsigned int irq); + +/* shutdown is same as "disable" */ +#define shutdown_pint_irq disable_pint_irq + +static void mask_and_ack_pint(unsigned int); +static void end_pint_irq(unsigned int irq); + +static unsigned int startup_pint_irq(unsigned int irq) +{ + enable_pint_irq(irq); + return 0; /* never anything pending */ +} + +static struct hw_interrupt_type pint_irq_type = { + .typename = "PINT-IRQ", + .startup = startup_pint_irq, + .shutdown = shutdown_pint_irq, + .enable = enable_pint_irq, + .disable = disable_pint_irq, + .ack = mask_and_ack_pint, + .end = end_pint_irq +}; + +static void disable_pint_irq(unsigned int irq) +{ + unsigned long val, flags; + + local_irq_save(flags); + val = ctrl_inw(INTC_INTER); + val &= ~(1 << (irq - PINT_IRQ_BASE)); + ctrl_outw(val, INTC_INTER); /* disable PINTn */ + portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2); + local_irq_restore(flags); +} + +static void enable_pint_irq(unsigned int irq) +{ + unsigned long val, flags; + + local_irq_save(flags); + val = ctrl_inw(INTC_INTER); + val |= 1 << (irq - PINT_IRQ_BASE); + ctrl_outw(val, INTC_INTER); /* enable PINTn */ + portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2; + local_irq_restore(flags); +} + +static void mask_and_ack_pint(unsigned int irq) +{ + disable_pint_irq(irq); +} + +static void end_pint_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_pint_irq(irq); +} + +void make_pint_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].handler = &pint_irq_type; + disable_pint_irq(irq); +} + +void __init init_IRQ_pint(void) +{ + int i; + + make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY); + make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY); + + enable_irq(PINT0_IRQ); + enable_irq(PINT8_IRQ); + + for(i = 0; i < 16; i++) + make_pint_irq(PINT_IRQ_BASE + i); + + for(i = 0; i < 256; i++) { + if (i & 1) + pint_map[i] = 0; + else if (i & 2) + pint_map[i] = 1; + else if (i & 4) + pint_map[i] = 2; + else if (i & 8) + pint_map[i] = 3; + else if (i & 0x10) + pint_map[i] = 4; + else if (i & 0x20) + pint_map[i] = 5; + else if (i & 0x40) + pint_map[i] = 6; + else if (i & 0x80) + pint_map[i] = 7; + } +} + +int ipr_irq_demux(int irq) +{ + unsigned long creg, dreg, d, sav; + + if (irq == PINT0_IRQ) { +#if defined(CONFIG_CPU_SUBTYPE_SH7707) + creg = PORT_PACR; + dreg = PORT_PADR; +#else + creg = PORT_PCCR; + dreg = PORT_PCDR; +#endif + sav = ctrl_inw(creg); + ctrl_outw(sav | portcr_mask, creg); + d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) & + ctrl_inw(INTC_INTER) & 0xff; + ctrl_outw(sav, creg); + + if (d == 0) + return irq; + + return PINT_IRQ_BASE + pint_map[d]; + } else if (irq == PINT8_IRQ) { +#if defined(CONFIG_CPU_SUBTYPE_SH7707) + creg = PORT_PBCR; + dreg = PORT_PBDR; +#else + creg = PORT_PFCR; + dreg = PORT_PFDR; +#endif + sav = ctrl_inw(creg); + ctrl_outw(sav | (portcr_mask >> 16), creg); + d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) & + (ctrl_inw(INTC_INTER) >> 8) & 0xff; + ctrl_outw(sav, creg); + + if (d == 0) + return irq; + + return PINT_IRQ_BASE + 8 + pint_map[d]; + } + + return irq; +} + diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index a64532e4dc6..b54dbb9a0c8 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -4,3 +4,10 @@ obj-y := ex.o probe.o +clock-$(CONFIG_CPU_SH3) := clock-sh3.o +clock-$(CONFIG_CPU_SUBTYPE_SH7300) := clock-sh7300.o +clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o +clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o + +obj-y += $(clock-y) + diff --git a/arch/sh/kernel/cpu/sh3/clock-sh3.c b/arch/sh/kernel/cpu/sh3/clock-sh3.c new file mode 100644 index 00000000000..c3c945958ba --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/clock-sh3.c @@ -0,0 +1,89 @@ +/* + * arch/sh/kernel/cpu/sh3/clock-sh3.c + * + * Generic SH-3 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * + * FRQCR parsing hacked out of arch/sh/kernel/time.c + * + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 }; +static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 }; +static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 }; + +static void master_clk_init(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003); + + clk->rate *= pfc_divisors[idx]; +} + +static struct clk_ops sh3_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003); + + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh3_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4); + + clk->rate = clk->parent->rate / stc_multipliers[idx]; +} + +static struct clk_ops sh3_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2); + + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh3_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh3_clk_ops[] = { + &sh3_master_clk_ops, + &sh3_module_clk_ops, + &sh3_bus_clk_ops, + &sh3_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh3_clk_ops)) + *ops = sh3_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7300.c b/arch/sh/kernel/cpu/sh3/clock-sh7300.c new file mode 100644 index 00000000000..e804174b962 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/clock-sh7300.c @@ -0,0 +1,78 @@ +/* + * arch/sh/kernel/cpu/sh3/clock-sh7300.c + * + * SH7300 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * + * FRQCR parsing hacked out of arch/sh/kernel/time.c + * + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007]; +} + +static struct clk_ops sh7300_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) & 0x0007); + clk->rate = clk->parent->rate / md_table[idx]; +} + +static struct clk_ops sh7300_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8; + clk->rate = clk->parent->rate / md_table[idx]; +} + +static struct clk_ops sh7300_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4; + clk->rate = clk->parent->rate / md_table[idx]; +} + +static struct clk_ops sh7300_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7300_clk_ops[] = { + &sh7300_master_clk_ops, + &sh7300_module_clk_ops, + &sh7300_bus_clk_ops, + &sh7300_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7300_clk_ops)) + *ops = sh7300_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7705.c b/arch/sh/kernel/cpu/sh3/clock-sh7705.c new file mode 100644 index 00000000000..dfdbf3277fd --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/clock-sh7705.c @@ -0,0 +1,84 @@ +/* + * arch/sh/kernel/cpu/sh3/clock-sh7705.c + * + * SH7705 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * + * FRQCR parsing hacked out of arch/sh/kernel/time.c + * + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +/* + * SH7705 uses the same divisors as the generic SH-3 case, it's just the + * FRQCR layout that is a bit different.. + */ +static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 }; +static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 }; +static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0003]; +} + +static struct clk_ops sh7705_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = ctrl_inw(FRQCR) & 0x0003; + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7705_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) & 0x0300) >> 8; + clk->rate = clk->parent->rate / stc_multipliers[idx]; +} + +static struct clk_ops sh7705_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) & 0x0030) >> 4; + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh7705_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7705_clk_ops[] = { + &sh7705_master_clk_ops, + &sh7705_module_clk_ops, + &sh7705_bus_clk_ops, + &sh7705_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7705_clk_ops)) + *ops = sh7705_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c new file mode 100644 index 00000000000..10461a745e5 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c @@ -0,0 +1,96 @@ +/* + * arch/sh/kernel/cpu/sh3/clock-sh7709.c + * + * SH7709 support for the clock framework + * + * Copyright (C) 2005 Andriy Skulysh + * + * Based on arch/sh/kernel/cpu/sh3/clock-sh7705.c + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int stc_multipliers[] = { 1, 2, 4, 8, 3, 6, 1, 1 }; +static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 }; +static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 }; + +static void set_bus_parent(struct clk *clk) +{ + struct clk *bus_clk = clk_get("bus_clk"); + clk->parent = bus_clk; + clk_put(bus_clk); +} + +static void master_clk_init(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003); + + clk->rate *= pfc_divisors[idx]; +} + +static struct clk_ops sh7709_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003); + + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7709_module_clk_ops = { +#ifdef CLOCK_MODE_0_1_2_7 + .init = set_bus_parent, +#endif + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = (frqcr & 0x0080) ? + ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1; + + clk->rate = clk->parent->rate * stc_multipliers[idx]; +} + +static struct clk_ops sh7709_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2); + + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh7709_cpu_clk_ops = { + .init = set_bus_parent, + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7709_clk_ops[] = { + &sh7709_master_clk_ops, + &sh7709_module_clk_ops, + &sh7709_bus_clk_ops, + &sh7709_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7709_clk_ops)) + *ops = sh7709_clk_ops[idx]; +} diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index ead1071eac7..3d5cafc71ae 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -5,6 +5,15 @@ obj-y := ex.o probe.o obj-$(CONFIG_SH_FPU) += fpu.o -obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += irq_intc2.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o +# Primary on-chip clocks (common) +clock-$(CONFIG_CPU_SH4) := clock-sh4.o +clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o +clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o +clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o + +# Additional clocks by subtype +clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o + +obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c new file mode 100644 index 00000000000..bfdf5fe8d94 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c @@ -0,0 +1,179 @@ +/* + * arch/sh/kernel/cpu/sh4/clock-sh4-202.c + * + * Additional SH4-202 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +#define CPG2_FRQCR3 0xfe0a0018 + +static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 }; +static int frqcr3_values[] = { 0, 1, 2, 3, 4, 5, 6 }; + +static void emi_clk_recalc(struct clk *clk) +{ + int idx = ctrl_inl(CPG2_FRQCR3) & 0x0007; + clk->rate = clk->parent->rate / frqcr3_divisors[idx]; +} + +static inline int frqcr3_lookup(struct clk *clk, unsigned long rate) +{ + int divisor = clk->parent->rate / rate; + int i; + + for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) + if (frqcr3_divisors[i] == divisor) + return frqcr3_values[i]; + + /* Safe fallback */ + return 5; +} + +static struct clk_ops sh4202_emi_clk_ops = { + .recalc = emi_clk_recalc, +}; + +static struct clk sh4202_emi_clk = { + .name = "emi_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh4202_emi_clk_ops, +}; + +static void femi_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inl(CPG2_FRQCR3) >> 3) & 0x0007; + clk->rate = clk->parent->rate / frqcr3_divisors[idx]; +} + +static struct clk_ops sh4202_femi_clk_ops = { + .recalc = femi_clk_recalc, +}; + +static struct clk sh4202_femi_clk = { + .name = "femi_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh4202_femi_clk_ops, +}; + +static void shoc_clk_init(struct clk *clk) +{ + int i; + + /* + * For some reason, the shoc_clk seems to be set to some really + * insane value at boot (values outside of the allowable frequency + * range for instance). We deal with this by scaling it back down + * to something sensible just in case. + * + * Start scaling from the high end down until we find something + * that passes rate verification.. + */ + for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) { + int divisor = frqcr3_divisors[i]; + + if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0) + break; + } + + WARN_ON(i == ARRAY_SIZE(frqcr3_divisors)); /* Undefined clock */ +} + +static void shoc_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inl(CPG2_FRQCR3) >> 6) & 0x0007; + clk->rate = clk->parent->rate / frqcr3_divisors[idx]; +} + +static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate) +{ + struct clk *bclk = clk_get("bus_clk"); + unsigned long bclk_rate = clk_get_rate(bclk); + + clk_put(bclk); + + if (rate > bclk_rate) + return 1; + if (rate > 66000000) + return 1; + + return 0; +} + +static int shoc_clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long frqcr3; + unsigned int tmp; + + /* Make sure we have something sensible to switch to */ + if (shoc_clk_verify_rate(clk, rate) != 0) + return -EINVAL; + + tmp = frqcr3_lookup(clk, rate); + + frqcr3 = ctrl_inl(CPG2_FRQCR3); + frqcr3 &= ~(0x0007 << 6); + frqcr3 |= tmp << 6; + ctrl_outl(frqcr3, CPG2_FRQCR3); + + clk->rate = clk->parent->rate / frqcr3_divisors[tmp]; + + return 0; +} + +static struct clk_ops sh4202_shoc_clk_ops = { + .init = shoc_clk_init, + .recalc = shoc_clk_recalc, + .set_rate = shoc_clk_set_rate, +}; + +static struct clk sh4202_shoc_clk = { + .name = "shoc_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh4202_shoc_clk_ops, +}; + +static struct clk *sh4202_onchip_clocks[] = { + &sh4202_emi_clk, + &sh4202_femi_clk, + &sh4202_shoc_clk, +}; + +static int __init sh4202_clk_init(void) +{ + struct clk *clk = clk_get("master_clk"); + int i; + + for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) { + struct clk *clkp = sh4202_onchip_clocks[i]; + + clkp->parent = clk; + clk_register(clkp); + clk_enable(clkp); + } + + /* + * Now that we have the rest of the clocks registered, we need to + * force the parent clock to propagate so that these clocks will + * automatically figure out their rate. We cheat by handing the + * parent clock its current rate and forcing child propagation. + */ + clk_set_rate(clk, clk_get_rate(clk)); + + clk_put(clk); + + return 0; +} + +arch_initcall(sh4202_clk_init); + diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4.c b/arch/sh/kernel/cpu/sh4/clock-sh4.c new file mode 100644 index 00000000000..dca9f87a12d --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/clock-sh4.c @@ -0,0 +1,80 @@ +/* + * arch/sh/kernel/cpu/sh4/clock-sh4.c + * + * Generic SH-4 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * + * FRQCR parsing hacked out of arch/sh/kernel/time.c + * + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 }; +#define bfc_divisors ifc_divisors /* Same */ +static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0007]; +} + +static struct clk_ops sh4_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) & 0x0007); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh4_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) >> 3) & 0x0007; + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops sh4_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FRQCR) >> 6) & 0x0007; + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh4_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh4_clk_ops[] = { + &sh4_master_clk_ops, + &sh4_module_clk_ops, + &sh4_bus_clk_ops, + &sh4_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh4_clk_ops)) + *ops = sh4_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh4/clock-sh73180.c b/arch/sh/kernel/cpu/sh4/clock-sh73180.c new file mode 100644 index 00000000000..2fa5cb2ae68 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/clock-sh73180.c @@ -0,0 +1,81 @@ +/* + * arch/sh/kernel/cpu/sh4/clock-sh73180.c + * + * SH73180 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * + * FRQCR parsing hacked out of arch/sh/kernel/time.c + * + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +/* + * SH73180 uses a common set of divisors, so this is quite simple.. + */ +static int divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= divisors[ctrl_inl(FRQCR) & 0x0007]; +} + +static struct clk_ops sh73180_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inl(FRQCR) & 0x0007); + clk->rate = clk->parent->rate / divisors[idx]; +} + +static struct clk_ops sh73180_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inl(FRQCR) >> 12) & 0x0007; + clk->rate = clk->parent->rate / divisors[idx]; +} + +static struct clk_ops sh73180_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inl(FRQCR) >> 20) & 0x0007; + clk->rate = clk->parent->rate / divisors[idx]; +} + +static struct clk_ops sh73180_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh73180_clk_ops[] = { + &sh73180_master_clk_ops, + &sh73180_module_clk_ops, + &sh73180_bus_clk_ops, + &sh73180_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh73180_clk_ops)) + *ops = sh73180_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh4/clock-sh7770.c b/arch/sh/kernel/cpu/sh4/clock-sh7770.c new file mode 100644 index 00000000000..c8694bac647 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/clock-sh7770.c @@ -0,0 +1,73 @@ +/* + * arch/sh/kernel/cpu/sh4/clock-sh7770.c + * + * SH7770 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int ifc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 1 }; +static int bfc_divisors[] = { 1, 1, 1, 1, 1, 8,12, 1 }; +static int pfc_divisors[] = { 1, 8, 1,10,12,16, 1, 1 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> 28) & 0x000f]; +} + +static struct clk_ops sh7770_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 28) & 0x000f); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7770_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inl(FRQCR) & 0x000f); + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops sh7770_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 24) & 0x000f); + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh7770_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7770_clk_ops[] = { + &sh7770_master_clk_ops, + &sh7770_module_clk_ops, + &sh7770_bus_clk_ops, + &sh7770_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7770_clk_ops)) + *ops = sh7770_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh4/clock-sh7780.c b/arch/sh/kernel/cpu/sh4/clock-sh7780.c new file mode 100644 index 00000000000..93ad367342c --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/clock-sh7780.c @@ -0,0 +1,126 @@ +/* + * arch/sh/kernel/cpu/sh4/clock-sh7780.c + * + * SH7780 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int ifc_divisors[] = { 2, 4 }; +static int bfc_divisors[] = { 1, 1, 1, 8, 12, 16, 24, 1 }; +static int pfc_divisors[] = { 1, 24, 24, 1 }; +static int cfc_divisors[] = { 1, 1, 4, 1, 6, 1, 1, 1 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pfc_divisors[ctrl_inl(FRQCR) & 0x0003]; +} + +static struct clk_ops sh7780_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inl(FRQCR) & 0x0003); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7780_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 16) & 0x0007); + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops sh7780_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 24) & 0x0001); + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh7780_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7780_clk_ops[] = { + &sh7780_master_clk_ops, + &sh7780_module_clk_ops, + &sh7780_bus_clk_ops, + &sh7780_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7780_clk_ops)) + *ops = sh7780_clk_ops[idx]; +} + +static void shyway_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 20) & 0x0007); + clk->rate = clk->parent->rate / cfc_divisors[idx]; +} + +static struct clk_ops sh7780_shyway_clk_ops = { + .recalc = shyway_clk_recalc, +}; + +static struct clk sh7780_shyway_clk = { + .name = "shyway_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh7780_shyway_clk_ops, +}; + +/* + * Additional SH7780-specific on-chip clocks that aren't already part of the + * clock framework + */ +static struct clk *sh7780_onchip_clocks[] = { + &sh7780_shyway_clk, +}; + +static int __init sh7780_clk_init(void) +{ + struct clk *clk = clk_get("master_clk"); + int i; + + for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) { + struct clk *clkp = sh7780_onchip_clocks[i]; + + clkp->parent = clk; + clk_register(clkp); + clk_enable(clkp); + } + + /* + * Now that we have the rest of the clocks registered, we need to + * force the parent clock to propagate so that these clocks will + * automatically figure out their rate. We cheat by handing the + * parent clock its current rate and forcing child propagation. + */ + clk_set_rate(clk, clk_get_rate(clk)); + + clk_put(clk); + + return 0; +} + +arch_initcall(sh7780_clk_init); + diff --git a/arch/sh/kernel/cpu/sh4/irq_intc2.c b/arch/sh/kernel/cpu/sh4/irq_intc2.c deleted file mode 100644 index f6b16ba0193..00000000000 --- a/arch/sh/kernel/cpu/sh4/irq_intc2.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * linux/arch/sh/kernel/irq_intc2.c - * - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Interrupt handling for INTC2-based IRQ. - * - * These are the "new Hitachi style" interrupts, as present on the - * Hitachi 7751 and the STM ST40 STB1. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/machvec.h> - - -struct intc2_data { - unsigned char msk_offset; - unsigned char msk_shift; -#ifdef CONFIG_CPU_SUBTYPE_ST40 - int (*clear_irq) (int); -#endif -}; - - -static struct intc2_data intc2_data[NR_INTC2_IRQS]; - -static void enable_intc2_irq(unsigned int irq); -static void disable_intc2_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_intc2_irq disable_intc2_irq - -static void mask_and_ack_intc2(unsigned int); -static void end_intc2_irq(unsigned int irq); - -static unsigned int startup_intc2_irq(unsigned int irq) -{ - enable_intc2_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type intc2_irq_type = { - .typename = "INTC2-IRQ", - .startup = startup_intc2_irq, - .shutdown = shutdown_intc2_irq, - .enable = enable_intc2_irq, - .disable = disable_intc2_irq, - .ack = mask_and_ack_intc2, - .end = end_intc2_irq -}; - -static void disable_intc2_irq(unsigned int irq) -{ - int irq_offset = irq - INTC2_FIRST_IRQ; - int msk_shift, msk_offset; - - // Sanity check - if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS)) - return; - - msk_shift = intc2_data[irq_offset].msk_shift; - msk_offset = intc2_data[irq_offset].msk_offset; - - ctrl_outl(1<<msk_shift, - INTC2_BASE+INTC2_INTMSK_OFFSET+msk_offset); -} - -static void enable_intc2_irq(unsigned int irq) -{ - int irq_offset = irq - INTC2_FIRST_IRQ; - int msk_shift, msk_offset; - - /* Sanity check */ - if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS)) - return; - - msk_shift = intc2_data[irq_offset].msk_shift; - msk_offset = intc2_data[irq_offset].msk_offset; - - ctrl_outl(1<<msk_shift, - INTC2_BASE+INTC2_INTMSKCLR_OFFSET+msk_offset); -} - -static void mask_and_ack_intc2(unsigned int irq) -{ - disable_intc2_irq(irq); -} - -static void end_intc2_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_intc2_irq(irq); - -#ifdef CONFIG_CPU_SUBTYPE_ST40 - if (intc2_data[irq - INTC2_FIRST_IRQ].clear_irq) - intc2_data[irq - INTC2_FIRST_IRQ].clear_irq (irq); -#endif -} - -/* - * Setup an INTC2 style interrupt. - * NOTE: Unlike IPR interrupts, parameters are not shifted by this code, - * allowing the use of the numbers straight out of the datasheet. - * For example: - * PIO1 which is INTPRI00[19,16] and INTMSK00[13] - * would be: ^ ^ ^ ^ - * | | | | - * make_intc2_irq(84, 0, 16, 0, 13); - */ -void make_intc2_irq(unsigned int irq, - unsigned int ipr_offset, unsigned int ipr_shift, - unsigned int msk_offset, unsigned int msk_shift, - unsigned int priority) -{ - int irq_offset = irq - INTC2_FIRST_IRQ; - unsigned int flags; - unsigned long ipr; - - if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS)) - return; - - disable_irq_nosync(irq); - - /* Fill the data we need */ - intc2_data[irq_offset].msk_offset = msk_offset; - intc2_data[irq_offset].msk_shift = msk_shift; -#ifdef CONFIG_CPU_SUBTYPE_ST40 - intc2_data[irq_offset].clear_irq = NULL; -#endif - - /* Set the priority level */ - local_irq_save(flags); - - ipr=ctrl_inl(INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset); - ipr&=~(0xf<<ipr_shift); - ipr|=(priority)<<ipr_shift; - ctrl_outl(ipr, INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset); - - local_irq_restore(flags); - - irq_desc[irq].handler=&intc2_irq_type; - - disable_intc2_irq(irq); -} - -#ifdef CONFIG_CPU_SUBTYPE_ST40 - -struct intc2_init { - unsigned short irq; - unsigned char ipr_offset, ipr_shift; - unsigned char msk_offset, msk_shift; -}; - -static struct intc2_init intc2_init_data[] __initdata = { - {64, 0, 0, 0, 0}, /* PCI serr */ - {65, 0, 4, 0, 1}, /* PCI err */ - {66, 0, 4, 0, 2}, /* PCI ad */ - {67, 0, 4, 0, 3}, /* PCI pwd down */ - {72, 0, 8, 0, 5}, /* DMAC INT0 */ - {73, 0, 8, 0, 6}, /* DMAC INT1 */ - {74, 0, 8, 0, 7}, /* DMAC INT2 */ - {75, 0, 8, 0, 8}, /* DMAC INT3 */ - {76, 0, 8, 0, 9}, /* DMAC INT4 */ - {78, 0, 8, 0, 11}, /* DMAC ERR */ - {80, 0, 12, 0, 12}, /* PIO0 */ - {84, 0, 16, 0, 13}, /* PIO1 */ - {88, 0, 20, 0, 14}, /* PIO2 */ - {112, 4, 0, 4, 0}, /* Mailbox */ -#ifdef CONFIG_CPU_SUBTYPE_ST40GX1 - {116, 4, 4, 4, 4}, /* SSC0 */ - {120, 4, 8, 4, 8}, /* IR Blaster */ - {124, 4, 12, 4, 12}, /* USB host */ - {128, 4, 16, 4, 16}, /* Video processor BLITTER */ - {132, 4, 20, 4, 20}, /* UART0 */ - {134, 4, 20, 4, 22}, /* UART2 */ - {136, 4, 24, 4, 24}, /* IO_PIO0 */ - {140, 4, 28, 4, 28}, /* EMPI */ - {144, 8, 0, 8, 0}, /* MAFE */ - {148, 8, 4, 8, 4}, /* PWM */ - {152, 8, 8, 8, 8}, /* SSC1 */ - {156, 8, 12, 8, 12}, /* IO_PIO1 */ - {160, 8, 16, 8, 16}, /* USB target */ - {164, 8, 20, 8, 20}, /* UART1 */ - {168, 8, 24, 8, 24}, /* Teletext */ - {172, 8, 28, 8, 28}, /* VideoSync VTG */ - {173, 8, 28, 8, 29}, /* VideoSync DVP0 */ - {174, 8, 28, 8, 30}, /* VideoSync DVP1 */ -#endif -}; - -void __init init_IRQ_intc2(void) -{ - struct intc2_init *p; - - printk(KERN_ALERT "init_IRQ_intc2\n"); - - for (p = intc2_init_data; - p<intc2_init_data+ARRAY_SIZE(intc2_init_data); - p++) { - make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift, - p-> msk_offset, p->msk_shift, 13); - } -} - -/* Adds a termination callback to the interrupt */ -void intc2_add_clear_irq(int irq, int (*fn)(int)) -{ - if (irq < INTC2_FIRST_IRQ) - return; - - intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn; -} - -#endif /* CONFIG_CPU_SUBTYPE_ST40 */ diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c index d9932f25993..71c9fde2fd9 100644 --- a/arch/sh/kernel/io.c +++ b/arch/sh/kernel/io.c @@ -2,58 +2,73 @@ * linux/arch/sh/kernel/io.c * * Copyright (C) 2000 Stuart Menefy + * Copyright (C) 2005 Paul Mundt * * Provide real functions which expand to whatever the header file defined. * Also definitions of machine independent IO functions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - -#include <asm/io.h> #include <linux/module.h> +#include <asm/machvec.h> +#include <asm/io.h> /* * Copy data from IO memory space to "real" memory space. * This needs to be optimized. */ -void memcpy_fromio(void * to, unsigned long from, unsigned long count) +void memcpy_fromio(void *to, volatile void __iomem *from, unsigned long count) { char *p = to; while (count) { count--; - *p = readb(from); + *p = readb((void __iomem *)from); p++; from++; } } - +EXPORT_SYMBOL(memcpy_fromio); + /* * Copy data from "real" memory space to IO memory space. * This needs to be optimized. */ -void memcpy_toio(unsigned long to, const void * from, unsigned long count) +void memcpy_toio(volatile void __iomem *to, const void *from, unsigned long count) { const char *p = from; while (count) { count--; - writeb(*p, to); + writeb(*p, (void __iomem *)to); p++; to++; } } - +EXPORT_SYMBOL(memcpy_toio); + /* * "memset" on IO memory space. * This needs to be optimized. */ -void memset_io(unsigned long dst, int c, unsigned long count) +void memset_io(volatile void __iomem *dst, int c, unsigned long count) { while (count) { count--; - writeb(c, dst); + writeb(c, (void __iomem *)dst); dst++; } } - -EXPORT_SYMBOL(memcpy_fromio); -EXPORT_SYMBOL(memcpy_toio); EXPORT_SYMBOL(memset_io); +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return sh_mv.mv_ioport_map(port, nr); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ + sh_mv.mv_ioport_unmap(addr); +} +EXPORT_SYMBOL(ioport_unmap); diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c index a911b0149d1..28ec7487de8 100644 --- a/arch/sh/kernel/io_generic.c +++ b/arch/sh/kernel/io_generic.c @@ -3,6 +3,7 @@ * linux/arch/sh/kernel/io_generic.c * * Copyright (C) 2000 Niibe Yutaka + * Copyright (C) 2005 Paul Mundt * * Generic I/O routine. These can be used where a machine specific version * is not required. @@ -10,21 +11,20 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * */ - +#include <linux/module.h> #include <asm/io.h> #include <asm/machvec.h> -#include <linux/module.h> -#if defined(CONFIG_CPU_SH3) +#ifdef CONFIG_CPU_SH3 +/* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a + * workaround. */ /* I'm not sure SH7709 has this kind of bug */ -#define SH3_PCMCIA_BUG_WORKAROUND 1 -#define DUMMY_READ_AREA6 0xba000000 +#define dummy_read() ctrl_inb(0xba000000) +#else +#define dummy_read() #endif -#define PORT2ADDR(x) (sh_mv.mv_isa_port2addr(x)) - unsigned long generic_io_base; static inline void delay(void) @@ -32,40 +32,40 @@ static inline void delay(void) ctrl_inw(0xa0000000); } -unsigned char generic_inb(unsigned long port) +u8 generic_inb(unsigned long port) { - return *(volatile unsigned char*)PORT2ADDR(port); + return ctrl_inb((unsigned long __force)ioport_map(port, 1)); } -unsigned short generic_inw(unsigned long port) +u16 generic_inw(unsigned long port) { - return *(volatile unsigned short*)PORT2ADDR(port); + return ctrl_inw((unsigned long __force)ioport_map(port, 2)); } -unsigned int generic_inl(unsigned long port) +u32 generic_inl(unsigned long port) { - return *(volatile unsigned long*)PORT2ADDR(port); + return ctrl_inl((unsigned long __force)ioport_map(port, 4)); } -unsigned char generic_inb_p(unsigned long port) +u8 generic_inb_p(unsigned long port) { - unsigned long v = *(volatile unsigned char*)PORT2ADDR(port); + unsigned long v = generic_inb(port); delay(); return v; } -unsigned short generic_inw_p(unsigned long port) +u16 generic_inw_p(unsigned long port) { - unsigned long v = *(volatile unsigned short*)PORT2ADDR(port); + unsigned long v = generic_inw(port); delay(); return v; } -unsigned int generic_inl_p(unsigned long port) +u32 generic_inl_p(unsigned long port) { - unsigned long v = *(volatile unsigned long*)PORT2ADDR(port); + unsigned long v = generic_inl(port); delay(); return v; @@ -77,75 +77,70 @@ unsigned int generic_inl_p(unsigned long port) * convert the port address to real address once. */ -void generic_insb(unsigned long port, void *buffer, unsigned long count) +void generic_insb(unsigned long port, void *dst, unsigned long count) { - volatile unsigned char *port_addr; - unsigned char *buf=buffer; - - port_addr = (volatile unsigned char *)PORT2ADDR(port); + volatile u8 *port_addr; + u8 *buf = dst; - while(count--) - *buf++ = *port_addr; + port_addr = (volatile u8 *)ioport_map(port, 1); + while (count--) + *buf++ = *port_addr; } -void generic_insw(unsigned long port, void *buffer, unsigned long count) +void generic_insw(unsigned long port, void *dst, unsigned long count) { - volatile unsigned short *port_addr; - unsigned short *buf=buffer; + volatile u16 *port_addr; + u16 *buf = dst; - port_addr = (volatile unsigned short *)PORT2ADDR(port); + port_addr = (volatile u16 *)ioport_map(port, 2); + while (count--) + *buf++ = *port_addr; - while(count--) - *buf++ = *port_addr; -#ifdef SH3_PCMCIA_BUG_WORKAROUND - ctrl_inb (DUMMY_READ_AREA6); -#endif + dummy_read(); } -void generic_insl(unsigned long port, void *buffer, unsigned long count) +void generic_insl(unsigned long port, void *dst, unsigned long count) { - volatile unsigned long *port_addr; - unsigned long *buf=buffer; + volatile u32 *port_addr; + u32 *buf = dst; - port_addr = (volatile unsigned long *)PORT2ADDR(port); + port_addr = (volatile u32 *)ioport_map(port, 4); + while (count--) + *buf++ = *port_addr; - while(count--) - *buf++ = *port_addr; -#ifdef SH3_PCMCIA_BUG_WORKAROUND - ctrl_inb (DUMMY_READ_AREA6); -#endif + dummy_read(); } -void generic_outb(unsigned char b, unsigned long port) +void generic_outb(u8 b, unsigned long port) { - *(volatile unsigned char*)PORT2ADDR(port) = b; + ctrl_outb(b, (unsigned long __force)ioport_map(port, 1)); } -void generic_outw(unsigned short b, unsigned long port) +void generic_outw(u16 b, unsigned long port) { - *(volatile unsigned short*)PORT2ADDR(port) = b; + ctrl_outw(b, (unsigned long __force)ioport_map(port, 2)); } -void generic_outl(unsigned int b, unsigned long port) +void generic_outl(u32 b, unsigned long port) { - *(volatile unsigned long*)PORT2ADDR(port) = b; + ctrl_outl(b, (unsigned long __force)ioport_map(port, 4)); } -void generic_outb_p(unsigned char b, unsigned long port) +void generic_outb_p(u8 b, unsigned long port) { - *(volatile unsigned char*)PORT2ADDR(port) = b; + generic_outb(b, port); delay(); } -void generic_outw_p(unsigned short b, unsigned long port) +void generic_outw_p(u16 b, unsigned long port) { - *(volatile unsigned short*)PORT2ADDR(port) = b; + generic_outw(b, port); delay(); } -void generic_outl_p(unsigned int b, unsigned long port) +void generic_outl_p(u32 b, unsigned long port) { - *(volatile unsigned long*)PORT2ADDR(port) = b; + generic_outl(b, port); delay(); } @@ -154,90 +149,77 @@ void generic_outl_p(unsigned int b, unsigned long port) * address. However as the port address doesn't change we only need to * convert the port address to real address once. */ - -void generic_outsb(unsigned long port, const void *buffer, unsigned long count) +void generic_outsb(unsigned long port, const void *src, unsigned long count) { - volatile unsigned char *port_addr; - const unsigned char *buf=buffer; + volatile u8 *port_addr; + const u8 *buf = src; - port_addr = (volatile unsigned char *)PORT2ADDR(port); + port_addr = (volatile u8 __force *)ioport_map(port, 1); - while(count--) - *port_addr = *buf++; + while (count--) + *port_addr = *buf++; } -void generic_outsw(unsigned long port, const void *buffer, unsigned long count) +void generic_outsw(unsigned long port, const void *src, unsigned long count) { - volatile unsigned short *port_addr; - const unsigned short *buf=buffer; + volatile u16 *port_addr; + const u16 *buf = src; - port_addr = (volatile unsigned short *)PORT2ADDR(port); + port_addr = (volatile u16 __force *)ioport_map(port, 2); - while(count--) - *port_addr = *buf++; + while (count--) + *port_addr = *buf++; -#ifdef SH3_PCMCIA_BUG_WORKAROUND - ctrl_inb (DUMMY_READ_AREA6); -#endif + dummy_read(); } -void generic_outsl(unsigned long port, const void *buffer, unsigned long count) +void generic_outsl(unsigned long port, const void *src, unsigned long count) { - volatile unsigned long *port_addr; - const unsigned long *buf=buffer; + volatile u32 *port_addr; + const u32 *buf = src; - port_addr = (volatile unsigned long *)PORT2ADDR(port); + port_addr = (volatile u32 __force *)ioport_map(port, 4); + while (count--) + *port_addr = *buf++; - while(count--) - *port_addr = *buf++; - -#ifdef SH3_PCMCIA_BUG_WORKAROUND - ctrl_inb (DUMMY_READ_AREA6); -#endif -} - -unsigned char generic_readb(unsigned long addr) -{ - return *(volatile unsigned char*)addr; + dummy_read(); } -unsigned short generic_readw(unsigned long addr) +u8 generic_readb(void __iomem *addr) { - return *(volatile unsigned short*)addr; + return ctrl_inb((unsigned long __force)addr); } -unsigned int generic_readl(unsigned long addr) +u16 generic_readw(void __iomem *addr) { - return *(volatile unsigned long*)addr; + return ctrl_inw((unsigned long __force)addr); } -void generic_writeb(unsigned char b, unsigned long addr) +u32 generic_readl(void __iomem *addr) { - *(volatile unsigned char*)addr = b; + return ctrl_inl((unsigned long __force)addr); } -void generic_writew(unsigned short b, unsigned long addr) +void generic_writeb(u8 b, void __iomem *addr) { - *(volatile unsigned short*)addr = b; + ctrl_outb(b, (unsigned long __force)addr); } -void generic_writel(unsigned int b, unsigned long addr) +void generic_writew(u16 b, void __iomem *addr) { - *(volatile unsigned long*)addr = b; + ctrl_outw(b, (unsigned long __force)addr); } -void * generic_ioremap(unsigned long offset, unsigned long size) +void generic_writel(u32 b, void __iomem *addr) { - return (void *) P2SEGADDR(offset); + ctrl_outl(b, (unsigned long __force)addr); } -EXPORT_SYMBOL(generic_ioremap); -void generic_iounmap(void *addr) +void __iomem *generic_ioport_map(unsigned long addr, unsigned int size) { + return (void __iomem *)(addr + generic_io_base); } -EXPORT_SYMBOL(generic_iounmap); -unsigned long generic_isa_port2addr(unsigned long offset) +void generic_ioport_unmap(void __iomem *addr) { - return offset + generic_io_base; } diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 54c171225b7..6883c00728c 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -8,38 +8,13 @@ * SuperH version: Copyright (C) 1999 Niibe Yutaka */ -/* - * IRQs are in fact implemented a bit like signal handlers for the kernel. - * Naturally it's not a 1:1 relation, but there are similarities. - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/kernel_stat.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> +#include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/init.h> +#include <linux/kernel_stat.h> #include <linux/seq_file.h> -#include <linux/kallsyms.h> -#include <linux/bitops.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/pgalloc.h> -#include <asm/delay.h> #include <asm/irq.h> -#include <linux/irq.h> - +#include <asm/processor.h> +#include <asm/cpu/mmu_context.h> /* * 'what should we do if we get a hw irq event on an illegal vector'. @@ -66,7 +41,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); } - if (i < ACTUAL_NR_IRQS) { + if (i < NR_IRQS) { spin_lock_irqsave(&irq_desc[i].lock, flags); action = irq_desc[i].action; if (!action) @@ -86,19 +61,32 @@ unlock: } #endif + asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs regs) -{ - int irq; +{ + int irq = r4; irq_enter(); - asm volatile("stc r2_bank, %0\n\t" - "shlr2 %0\n\t" - "shlr2 %0\n\t" - "shlr %0\n\t" - "add #-16, %0\n\t" - :"=z" (irq)); + +#ifdef CONFIG_CPU_HAS_INTEVT + __asm__ __volatile__ ( +#ifdef CONFIG_CPU_HAS_SR_RB + "stc r2_bank, %0\n\t" +#else + "mov.l @%1, %0\n\t" +#endif + "shlr2 %0\n\t" + "shlr2 %0\n\t" + "shlr %0\n\t" + "add #-16, %0\n\t" + : "=z" (irq), "=r" (r4) + : "1" (INTEVT) + : "memory" + ); +#endif + irq = irq_demux(irq); __do_IRQ(irq, ®s); irq_exit(); diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c new file mode 100644 index 00000000000..43546525f28 --- /dev/null +++ b/arch/sh/kernel/machine_kexec.c @@ -0,0 +1,112 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> + * + * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz + * LANDISK/sh4 supported by kogiidena + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/mm.h> +#include <linux/kexec.h> +#include <linux/delay.h> +#include <linux/reboot.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/io.h> +#include <asm/cacheflush.h> + +typedef NORET_TYPE void (*relocate_new_kernel_t)( + unsigned long indirection_page, + unsigned long reboot_code_buffer, + unsigned long start_address, + unsigned long vbr_reg) ATTRIB_NORET; + +const extern unsigned char relocate_new_kernel[]; +const extern unsigned int relocate_new_kernel_size; +extern void *gdb_vbr_vector; + +/* + * Provide a dummy crash_notes definition while crash dump arrives to ppc. + * This prevents breakage of crash_notes attribute in kernel/ksysfs.c. + */ +void *crash_notes = NULL; + +void machine_shutdown(void) +{ +} + +void machine_crash_shutdown(struct pt_regs *regs) +{ +} + +/* + * Do what every setup is needed on image and the + * reboot code buffer to allow us to avoid allocations + * later. + */ +int machine_kexec_prepare(struct kimage *image) +{ + return 0; +} + +void machine_kexec_cleanup(struct kimage *image) +{ +} + +static void kexec_info(struct kimage *image) +{ + int i; + printk("kexec information\n"); + for (i = 0; i < image->nr_segments; i++) { + printk(" segment[%d]: 0x%08x - 0x%08x (0x%08x)\n", + i, + (unsigned int)image->segment[i].mem, + (unsigned int)image->segment[i].mem + image->segment[i].memsz, + (unsigned int)image->segment[i].memsz); + } + printk(" start : 0x%08x\n\n", (unsigned int)image->start); +} + + +/* + * Do not allocate memory (or fail in any way) in machine_kexec(). + * We are past the point of no return, committed to rebooting now. + */ +NORET_TYPE void machine_kexec(struct kimage *image) +{ + + unsigned long page_list; + unsigned long reboot_code_buffer; + unsigned long vbr_reg; + relocate_new_kernel_t rnk; + +#if defined(CONFIG_SH_STANDARD_BIOS) + vbr_reg = ((unsigned long )gdb_vbr_vector) - 0x100; +#else + vbr_reg = 0x80000000; // dummy +#endif + /* Interrupts aren't acceptable while we reboot */ + local_irq_disable(); + + page_list = image->head; + + /* we need both effective and real address here */ + reboot_code_buffer = + (unsigned long)page_address(image->control_code_page); + + /* copy our kernel relocation code to the control code page */ + memcpy((void *)reboot_code_buffer, relocate_new_kernel, + relocate_new_kernel_size); + + kexec_info(image); + flush_cache_all(); + + /* now call it */ + rnk = (relocate_new_kernel_t) reboot_code_buffer; + (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg); +} + diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index fd4f240b833..a4dc2b532e1 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -71,6 +71,16 @@ void cpu_idle(void) void machine_restart(char * __unused) { + +#ifdef CONFIG_KEXEC + struct kimage *image; + image = xchg(&kexec_image, 0); + if (image) { + machine_shutdown(); + machine_kexec(image); + } +#endif + /* SR.BL=1 and invoke address error to let CPU reset (manual reset) */ asm volatile("ldc %0, sr\n\t" "mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001)); @@ -191,13 +201,8 @@ void flush_thread(void) { #if defined(CONFIG_SH_FPU) struct task_struct *tsk = current; - struct pt_regs *regs = (struct pt_regs *) - ((unsigned long)tsk->thread_info - + THREAD_SIZE - sizeof(struct pt_regs) - - sizeof(unsigned long)); - /* Forget lazy FPU state */ - clear_fpu(tsk, regs); + clear_fpu(tsk, task_pt_regs(tsk)); clear_used_math(); #endif } @@ -232,13 +237,7 @@ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) { struct pt_regs ptregs; - ptregs = *(struct pt_regs *) - ((unsigned long)tsk->thread_info + THREAD_SIZE - - sizeof(struct pt_regs) -#ifdef CONFIG_SH_DSP - - sizeof(struct pt_dspregs) -#endif - - sizeof(unsigned long)); + ptregs = *task_pt_regs(tsk); elf_core_copy_regs(regs, &ptregs); return 1; @@ -252,11 +251,7 @@ dump_task_fpu (struct task_struct *tsk, elf_fpregset_t *fpu) #if defined(CONFIG_SH_FPU) fpvalid = !!tsk_used_math(tsk); if (fpvalid) { - struct pt_regs *regs = (struct pt_regs *) - ((unsigned long)tsk->thread_info - + THREAD_SIZE - sizeof(struct pt_regs) - - sizeof(unsigned long)); - unlazy_fpu(tsk, regs); + unlazy_fpu(tsk, task_pt_regs(tsk)); memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu)); } #endif @@ -279,18 +274,13 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, copy_to_stopped_child_used_math(p); #endif - childregs = ((struct pt_regs *) - (THREAD_SIZE + (unsigned long) p->thread_info) -#ifdef CONFIG_SH_DSP - - sizeof(struct pt_dspregs) -#endif - - sizeof(unsigned long)) - 1; + childregs = task_pt_regs(p); *childregs = *regs; if (user_mode(regs)) { childregs->regs[15] = usp; } else { - childregs->regs[15] = (unsigned long)p->thread_info + THREAD_SIZE; + childregs->regs[15] = (unsigned long)task_stack_page(p) + THREAD_SIZE; } if (clone_flags & CLONE_SETTLS) { childregs->gbr = childregs->regs[0]; @@ -305,26 +295,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, return 0; } -/* - * fill in the user structure for a core dump.. - */ -void dump_thread(struct pt_regs * regs, struct user * dump) -{ - dump->magic = CMAGIC; - dump->start_code = current->mm->start_code; - dump->start_data = current->mm->start_data; - dump->start_stack = regs->regs[15] & ~(PAGE_SIZE - 1); - dump->u_tsize = (current->mm->end_code - dump->start_code) >> PAGE_SHIFT; - dump->u_dsize = (current->mm->brk + (PAGE_SIZE-1) - dump->start_data) >> PAGE_SHIFT; - dump->u_ssize = (current->mm->start_stack - dump->start_stack + - PAGE_SIZE - 1) >> PAGE_SHIFT; - /* Debug registers will come here. */ - - dump->regs = *regs; - - dump->u_fpvalid = dump_fpu(regs, &dump->fpu); -} - /* Tracing by user break controller. */ static void ubc_set_tracing(int asid, unsigned long pc) @@ -353,11 +323,7 @@ ubc_set_tracing(int asid, unsigned long pc) struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *next) { #if defined(CONFIG_SH_FPU) - struct pt_regs *regs = (struct pt_regs *) - ((unsigned long)prev->thread_info - + THREAD_SIZE - sizeof(struct pt_regs) - - sizeof(unsigned long)); - unlazy_fpu(prev, regs); + unlazy_fpu(prev, task_pt_regs(prev)); #endif #ifdef CONFIG_PREEMPT @@ -366,13 +332,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne struct pt_regs *regs; local_irq_save(flags); - regs = (struct pt_regs *) - ((unsigned long)prev->thread_info - + THREAD_SIZE - sizeof(struct pt_regs) -#ifdef CONFIG_SH_DSP - - sizeof(struct pt_dspregs) -#endif - - sizeof(unsigned long)); + regs = task_pt_regs(prev); if (user_mode(regs) && regs->regs[15] >= 0xc0000000) { int offset = (int)regs->regs[15]; @@ -392,7 +352,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne */ asm volatile("ldc %0, r7_bank" : /* no output */ - : "r" (next->thread_info)); + : "r" (task_thread_info(next))); #ifdef CONFIG_MMU /* If no tasks are using the UBC, we're done */ diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c index 1a8be06519e..3887b4f6feb 100644 --- a/arch/sh/kernel/ptrace.c +++ b/arch/sh/kernel/ptrace.c @@ -41,12 +41,7 @@ static inline int get_stack_long(struct task_struct *task, int offset) { unsigned char *stack; - stack = (unsigned char *) - task->thread_info + THREAD_SIZE - sizeof(struct pt_regs) -#ifdef CONFIG_SH_DSP - - sizeof(struct pt_dspregs) -#endif - - sizeof(unsigned long); + stack = (unsigned char *)task_pt_regs(task); stack += offset; return (*((int *)stack)); } @@ -59,12 +54,7 @@ static inline int put_stack_long(struct task_struct *task, int offset, { unsigned char *stack; - stack = (unsigned char *) - task->thread_info + THREAD_SIZE - sizeof(struct pt_regs) -#ifdef CONFIG_SH_DSP - - sizeof(struct pt_dspregs) -#endif - - sizeof(unsigned long); + stack = (unsigned char *)task_pt_regs(task); stack += offset; *(unsigned long *) stack = data; return 0; diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S new file mode 100644 index 00000000000..b0695cffec6 --- /dev/null +++ b/arch/sh/kernel/relocate_kernel.S @@ -0,0 +1,102 @@ +/* + * relocate_kernel.S - put the kernel image in place to boot + * 2005.9.17 kogiidena@eggplant.ddo.jp + * + * LANDISK/sh4 is supported. Maybe, SH archtecture works well. + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + +#include <linux/config.h> +#include <linux/linkage.h> + +#define PAGE_SIZE 4096 /* must be same value as in <asm/page.h> */ + + + .globl relocate_new_kernel +relocate_new_kernel: + /* r4 = indirection_page */ + /* r5 = reboot_code_buffer */ + /* r6 = start_address */ + /* r7 = vbr_reg */ + + mov.l 10f,r8 /* 4096 */ + mov.l 11f,r9 /* 0xa0000000 */ + + /* stack setting */ + add r8,r5 + mov r5,r15 + + bra 1f + mov r4,r0 /* cmd = indirection_page */ +0: + mov.l @r4+,r0 /* cmd = *ind++ */ + +1: /* addr = (cmd | 0xa0000000) & 0xfffffff0 */ + mov r0,r2 + or r9,r2 + mov #-16,r1 + and r1,r2 + + /* if(cmd & IND_DESTINATION) dst = addr */ + tst #1,r0 + bt 2f + bra 0b + mov r2,r5 + +2: /* else if(cmd & IND_INDIRECTION) ind = addr */ + tst #2,r0 + bt 3f + bra 0b + mov r2,r4 + +3: /* else if(cmd & IND_DONE) goto 6 */ + tst #4,r0 + bt 4f + bra 6f + nop + +4: /* else if(cmd & IND_SOURCE) memcpy(dst,addr,PAGE_SIZE) */ + tst #8,r0 + bt 0b + + mov r8,r3 + shlr2 r3 + shlr2 r3 +5: + dt r3 + mov.l @r2+,r1 /* 16n+0 */ + mov.l r1,@r5 + add #4,r5 + mov.l @r2+,r1 /* 16n+4 */ + mov.l r1,@r5 + add #4,r5 + mov.l @r2+,r1 /* 16n+8 */ + mov.l r1,@r5 + add #4,r5 + mov.l @r2+,r1 /* 16n+12 */ + mov.l r1,@r5 + add #4,r5 + bf 5b + + bra 0b + nop +6: +#ifdef CONFIG_SH_STANDARD_BIOS + ldc r7, vbr +#endif + jmp @r6 + nop + + .align 2 +10: + .long PAGE_SIZE +11: + .long 0xa0000000 + +relocate_new_kernel_end: + + .globl relocate_new_kernel_size +relocate_new_kernel_size: + .long relocate_new_kernel_end - relocate_new_kernel diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index 6954fd62470..1cf94a618be 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -21,14 +21,12 @@ #include <asm/cacheflush.h> #include <asm/checksum.h> -extern void dump_thread(struct pt_regs *, struct user *); extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); extern struct hw_interrupt_type no_irq_type; EXPORT_SYMBOL(sh_mv); /* platform dependent support */ -EXPORT_SYMBOL(dump_thread); EXPORT_SYMBOL(dump_fpu); EXPORT_SYMBOL(iounmap); EXPORT_SYMBOL(enable_irq); diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 59e49b18252..62c7d1c0ad7 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -103,7 +103,7 @@ int __cpu_up(unsigned int cpu) if (IS_ERR(tsk)) panic("Failed forking idle task for cpu %d\n", cpu); - tsk->thread_info->cpu = cpu; + task_thread_info(tsk)->cpu = cpu; cpu_set(cpu, cpu_online_map); diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 671b876416b..314a275c04e 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -3,7 +3,7 @@ * * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> - * Copyright (C) 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2002, 2003, 2004, 2005 Paul Mundt * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org> * * Some code taken from i386 version. @@ -11,50 +11,21 @@ */ #include <linux/config.h> -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/sched.h> #include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/delay.h> +#include <linux/module.h> #include <linux/init.h> -#include <linux/smp.h> #include <linux/profile.h> - -#include <asm/processor.h> -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/delay.h> -#include <asm/machvec.h> +#include <asm/clock.h> #include <asm/rtc.h> -#include <asm/freq.h> -#include <asm/cpu/timer.h> -#ifdef CONFIG_SH_KGDB +#include <asm/timer.h> #include <asm/kgdb.h> -#endif - -#include <linux/timex.h> -#include <linux/irq.h> - -#define TMU_TOCR_INIT 0x00 -#define TMU0_TCR_INIT 0x0020 -#define TMU_TSTR_INIT 1 - -#define TMU0_TCR_CALIB 0x0000 - -#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 -#define CLOCKGEN_MEMCLKCR 0xbb040038 -#define MEMCLKCR_RATIO_MASK 0x7 -#endif /* CONFIG_CPU_SUBTYPE_ST40STB1 */ extern unsigned long wall_jiffies; -#define TICK_SIZE (tick_nsec / 1000) -DEFINE_SPINLOCK(tmu0_lock); +struct sys_timer *sys_timer; + +/* Move this somewhere more sensible.. */ +DEFINE_SPINLOCK(rtc_lock); +EXPORT_SYMBOL(rtc_lock); /* XXX: Can we initialize this in a routine somewhere? Dreamcast doesn't want * these routines anywhere... */ @@ -66,98 +37,14 @@ void (*rtc_get_time)(struct timespec *); int (*rtc_set_time)(const time_t); #endif -#if defined(CONFIG_CPU_SUBTYPE_SH7300) -static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 }; -#endif -#if defined(CONFIG_CPU_SH3) -static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 }; -static int stc_values[] = { 0, 1, 4, 2, 5, 0, 0, 0 }; -#define bfc_divisors stc_multipliers -#define bfc_values stc_values -static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 }; -static int ifc_values[] = { 0, 1, 4, 2, 0, 0, 0, 0 }; -static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 }; -static int pfc_values[] = { 0, 1, 4, 2, 5, 0, 0, 0 }; -#elif defined(CONFIG_CPU_SH4) -#if defined(CONFIG_CPU_SUBTYPE_SH73180) -static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 }; -static int ifc_values[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; -#define bfc_divisors ifc_divisors /* Same */ -#define bfc_values ifc_values -#define pfc_divisors ifc_divisors /* Same */ -#define pfc_values ifc_values -#else -static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 }; -static int ifc_values[] = { 0, 1, 2, 3, 0, 4, 0, 5 }; -#define bfc_divisors ifc_divisors /* Same */ -#define bfc_values ifc_values -static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 }; -static int pfc_values[] = { 0, 0, 1, 2, 0, 3, 0, 4 }; -#endif -#else -#error "Unknown ifc/bfc/pfc/stc values for this processor" -#endif - /* * Scheduler clock - returns current time in nanosec units. */ -unsigned long long sched_clock(void) +unsigned long long __attribute__ ((weak)) sched_clock(void) { return (unsigned long long)jiffies * (1000000000 / HZ); } -static unsigned long do_gettimeoffset(void) -{ - int count; - unsigned long flags; - - static int count_p = 0x7fffffff; /* for the first call after boot */ - static unsigned long jiffies_p = 0; - - /* - * cache volatile jiffies temporarily; we have IRQs turned off. - */ - unsigned long jiffies_t; - - spin_lock_irqsave(&tmu0_lock, flags); - /* timer count may underflow right here */ - count = ctrl_inl(TMU0_TCNT); /* read the latched count */ - - jiffies_t = jiffies; - - /* - * avoiding timer inconsistencies (they are rare, but they happen)... - * there is one kind of problem that must be avoided here: - * 1. the timer counter underflows - */ - - if( jiffies_t == jiffies_p ) { - if( count > count_p ) { - /* the nutcase */ - - if(ctrl_inw(TMU0_TCR) & 0x100) { /* Check UNF bit */ - /* - * We cannot detect lost timer interrupts ... - * well, that's why we call them lost, don't we? :) - * [hmm, on the Pentium and Alpha we can ... sort of] - */ - count -= LATCH; - } else { - printk("do_slow_gettimeoffset(): hardware timer problem?\n"); - } - } - } else - jiffies_p = jiffies_t; - - count_p = count; - spin_unlock_irqrestore(&tmu0_lock, flags); - - count = ((LATCH-1) - count) * TICK_SIZE; - count = (count + LATCH/2) / LATCH; - - return count; -} - void do_gettimeofday(struct timeval *tv) { unsigned long seq; @@ -166,7 +53,7 @@ void do_gettimeofday(struct timeval *tv) do { seq = read_seqbegin(&xtime_lock); - usec = do_gettimeoffset(); + usec = get_timer_offset(); lost = jiffies - wall_jiffies; if (lost) @@ -202,7 +89,7 @@ int do_settimeofday(struct timespec *tv) * wall time. Discover what correction gettimeofday() would have * made, and then undo it! */ - nsec -= 1000 * (do_gettimeoffset() + + nsec -= 1000 * (get_timer_offset() + (jiffies - wall_jiffies) * (1000000 / HZ)); wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); @@ -224,10 +111,10 @@ EXPORT_SYMBOL(do_settimeofday); static long last_rtc_update; /* - * timer_interrupt() needs to keep up the real-time clock, + * handle_timer_tick() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static inline void do_timer_interrupt(int irq, struct pt_regs *regs) +void handle_timer_tick(struct pt_regs *regs) { do_timer(regs); #ifndef CONFIG_SMP @@ -252,337 +139,35 @@ static inline void do_timer_interrupt(int irq, struct pt_regs *regs) if (rtc_set_time(xtime.tv_sec) == 0) last_rtc_update = xtime.tv_sec; else - last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ + /* do it again in 60s */ + last_rtc_update = xtime.tv_sec - 600; } } -/* - * This is the same as the above, except we _also_ save the current - * Time Stamp Counter value at the time of the timer interrupt, so that - * we later on can estimate the time of day more exactly. - */ -static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - unsigned long timer_status; - - /* Clear UNF bit */ - timer_status = ctrl_inw(TMU0_TCR); - timer_status &= ~0x100; - ctrl_outw(timer_status, TMU0_TCR); - - /* - * Here we are in the timer irq handler. We just have irqs locally - * disabled but we don't know if the timer_bh is running on the other - * CPU. We need to avoid to SMP race with it. NOTE: we don' t need - * the irq version of write_lock because as just said we have irq - * locally disabled. -arca - */ - write_seqlock(&xtime_lock); - do_timer_interrupt(irq, regs); - write_sequnlock(&xtime_lock); - - return IRQ_HANDLED; -} - -/* - * Hah! We'll see if this works (switching from usecs to nsecs). - */ -static unsigned int __init get_timer_frequency(void) -{ - u32 freq; - struct timespec ts1, ts2; - unsigned long diff_nsec; - unsigned long factor; - - /* Setup the timer: We don't want to generate interrupts, just - * have it count down at its natural rate. - */ - ctrl_outb(0, TMU_TSTR); -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) - ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); -#endif - ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR); - ctrl_outl(0xffffffff, TMU0_TCOR); - ctrl_outl(0xffffffff, TMU0_TCNT); - - rtc_get_time(&ts2); - - do { - rtc_get_time(&ts1); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - /* actually start the timer */ - ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); - - do { - rtc_get_time(&ts2); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - freq = 0xffffffff - ctrl_inl(TMU0_TCNT); - if (ts2.tv_nsec < ts1.tv_nsec) { - ts2.tv_nsec += 1000000000; - ts2.tv_sec--; - } - - diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec); - - /* this should work well if the RTC has a precision of n Hz, where - * n is an integer. I don't think we have to worry about the other - * cases. */ - factor = (1000000000 + diff_nsec/2) / diff_nsec; - - if (factor * diff_nsec > 1100000000 || - factor * diff_nsec < 900000000) - panic("weird RTC (diff_nsec %ld)", diff_nsec); - - return freq * factor; -} - -void (*board_time_init)(void); -void (*board_timer_setup)(struct irqaction *irq); - -static unsigned int sh_pclk_freq __initdata = CONFIG_SH_PCLK_FREQ; - -static int __init sh_pclk_setup(char *str) -{ - unsigned int freq; - - if (get_option(&str, &freq)) - sh_pclk_freq = freq; - - return 1; -} -__setup("sh_pclk=", sh_pclk_setup); - -static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL}; - -void get_current_frequency_divisors(unsigned int *ifc, unsigned int *bfc, unsigned int *pfc) -{ - unsigned int frqcr = ctrl_inw(FRQCR); - -#if defined(CONFIG_CPU_SH3) -#if defined(CONFIG_CPU_SUBTYPE_SH7300) - *ifc = md_table[((frqcr & 0x0070) >> 4)]; - *bfc = md_table[((frqcr & 0x0700) >> 8)]; - *pfc = md_table[frqcr & 0x0007]; -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) - *bfc = stc_multipliers[(frqcr & 0x0300) >> 8]; - *ifc = ifc_divisors[(frqcr & 0x0030) >> 4]; - *pfc = pfc_divisors[frqcr & 0x0003]; -#else - unsigned int tmp; - - tmp = (frqcr & 0x8000) >> 13; - tmp |= (frqcr & 0x0030) >> 4; - *bfc = stc_multipliers[tmp]; - tmp = (frqcr & 0x4000) >> 12; - tmp |= (frqcr & 0x000c) >> 2; - *ifc = ifc_divisors[tmp]; - tmp = (frqcr & 0x2000) >> 11; - tmp |= frqcr & 0x0003; - *pfc = pfc_divisors[tmp]; -#endif -#elif defined(CONFIG_CPU_SH4) -#if defined(CONFIG_CPU_SUBTYPE_SH73180) - *ifc = ifc_divisors[(frqcr>> 20) & 0x0007]; - *bfc = bfc_divisors[(frqcr>> 12) & 0x0007]; - *pfc = pfc_divisors[frqcr & 0x0007]; -#else - *ifc = ifc_divisors[(frqcr >> 6) & 0x0007]; - *bfc = bfc_divisors[(frqcr >> 3) & 0x0007]; - *pfc = pfc_divisors[frqcr & 0x0007]; -#endif -#endif -} - -/* - * This bit of ugliness builds up accessor routines to get at both - * the divisors and the physical values. - */ -#define _FREQ_TABLE(x) \ - unsigned int get_##x##_divisor(unsigned int value) \ - { return x##_divisors[value]; } \ - \ - unsigned int get_##x##_value(unsigned int divisor) \ - { return x##_values[(divisor - 1)]; } - -_FREQ_TABLE(ifc); -_FREQ_TABLE(bfc); -_FREQ_TABLE(pfc); - -#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 - -/* - * The ST40 divisors are totally different so we set the cpu data - * clocks using a different algorithm - * - * I've just plugged this from the 2.4 code - * - Alex Bennee <kernel-hacker@bennee.com> - */ -#define CCN_PVR_CHIP_SHIFT 24 -#define CCN_PVR_CHIP_MASK 0xff -#define CCN_PVR_CHIP_ST40STB1 0x4 - - -struct frqcr_data { - unsigned short frqcr; - - struct { - unsigned char multiplier; - unsigned char divisor; - } factor[3]; -}; - -static struct frqcr_data st40_frqcr_table[] = { - { 0x000, {{1,1}, {1,1}, {1,2}}}, - { 0x002, {{1,1}, {1,1}, {1,4}}}, - { 0x004, {{1,1}, {1,1}, {1,8}}}, - { 0x008, {{1,1}, {1,2}, {1,2}}}, - { 0x00A, {{1,1}, {1,2}, {1,4}}}, - { 0x00C, {{1,1}, {1,2}, {1,8}}}, - { 0x011, {{1,1}, {2,3}, {1,6}}}, - { 0x013, {{1,1}, {2,3}, {1,3}}}, - { 0x01A, {{1,1}, {1,2}, {1,4}}}, - { 0x01C, {{1,1}, {1,2}, {1,8}}}, - { 0x023, {{1,1}, {2,3}, {1,3}}}, - { 0x02C, {{1,1}, {1,2}, {1,8}}}, - { 0x048, {{1,2}, {1,2}, {1,4}}}, - { 0x04A, {{1,2}, {1,2}, {1,6}}}, - { 0x04C, {{1,2}, {1,2}, {1,8}}}, - { 0x05A, {{1,2}, {1,3}, {1,6}}}, - { 0x05C, {{1,2}, {1,3}, {1,6}}}, - { 0x063, {{1,2}, {1,4}, {1,4}}}, - { 0x06C, {{1,2}, {1,4}, {1,8}}}, - { 0x091, {{1,3}, {1,3}, {1,6}}}, - { 0x093, {{1,3}, {1,3}, {1,6}}}, - { 0x0A3, {{1,3}, {1,6}, {1,6}}}, - { 0x0DA, {{1,4}, {1,4}, {1,8}}}, - { 0x0DC, {{1,4}, {1,4}, {1,8}}}, - { 0x0EC, {{1,4}, {1,8}, {1,8}}}, - { 0x123, {{1,4}, {1,4}, {1,8}}}, - { 0x16C, {{1,4}, {1,8}, {1,8}}}, +static struct sysdev_class timer_sysclass = { + set_kset_name("timer"), }; -struct memclk_data { - unsigned char multiplier; - unsigned char divisor; -}; - -static struct memclk_data st40_memclk_table[8] = { - {1,1}, // 000 - {1,2}, // 001 - {1,3}, // 010 - {2,3}, // 011 - {1,4}, // 100 - {1,6}, // 101 - {1,8}, // 110 - {1,8} // 111 -}; - -static void st40_specific_time_init(unsigned int module_clock, unsigned short frqcr) +static int __init timer_init_sysfs(void) { - unsigned int cpu_clock, master_clock, bus_clock, memory_clock; - struct frqcr_data *d; - int a; - unsigned long memclkcr; - struct memclk_data *e; + int ret = sysdev_class_register(&timer_sysclass); + if (ret != 0) + return ret; - for (a = 0; a < ARRAY_SIZE(st40_frqcr_table); a++) { - d = &st40_frqcr_table[a]; - - if (d->frqcr == (frqcr & 0x1ff)) - break; - } + sys_timer->dev.cls = &timer_sysclass; + return sysdev_register(&sys_timer->dev); +} - if (a == ARRAY_SIZE(st40_frqcr_table)) { - d = st40_frqcr_table; +device_initcall(timer_init_sysfs); - printk("ERROR: Unrecognised FRQCR value (0x%x), " - "using default multipliers\n", frqcr); - } - - memclkcr = ctrl_inl(CLOCKGEN_MEMCLKCR); - e = &st40_memclk_table[memclkcr & MEMCLKCR_RATIO_MASK]; - - printk(KERN_INFO "Clock multipliers: CPU: %d/%d Bus: %d/%d " - "Mem: %d/%d Periph: %d/%d\n", - d->factor[0].multiplier, d->factor[0].divisor, - d->factor[1].multiplier, d->factor[1].divisor, - e->multiplier, e->divisor, - d->factor[2].multiplier, d->factor[2].divisor); - - master_clock = module_clock * d->factor[2].divisor - / d->factor[2].multiplier; - bus_clock = master_clock * d->factor[1].multiplier - / d->factor[1].divisor; - memory_clock = master_clock * e->multiplier - / e->divisor; - cpu_clock = master_clock * d->factor[0].multiplier - / d->factor[0].divisor; - - current_cpu_data.cpu_clock = cpu_clock; - current_cpu_data.master_clock = master_clock; - current_cpu_data.bus_clock = bus_clock; - current_cpu_data.memory_clock = memory_clock; - current_cpu_data.module_clock = module_clock; -} -#endif +void (*board_time_init)(void); void __init time_init(void) { - unsigned int timer_freq = 0; - unsigned int ifc, pfc, bfc; - unsigned long interval; -#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 - unsigned long pvr; - unsigned short frqcr; -#endif - if (board_time_init) board_time_init(); - /* - * If we don't have an RTC (such as with the SH7300), don't attempt to - * probe the timer frequency. Rely on an either hardcoded peripheral - * clock value, or on the sh_pclk command line option. Note that we - * still need to have CONFIG_SH_PCLK_FREQ set in order for things like - * CLOCK_TICK_RATE to be sane. - */ - current_cpu_data.module_clock = sh_pclk_freq; - -#ifdef CONFIG_SH_PCLK_CALC - /* XXX: Switch this over to a more generic test. */ - { - unsigned int freq; - - /* - * If we've specified a peripheral clock frequency, and we have - * an RTC, compare it against the autodetected value. Complain - * if there's a mismatch. - */ - timer_freq = get_timer_frequency(); - freq = timer_freq * 4; - - if (sh_pclk_freq && (sh_pclk_freq/100*99 > freq || sh_pclk_freq/100*101 < freq)) { - printk(KERN_NOTICE "Calculated peripheral clock value " - "%d differs from sh_pclk value %d, fixing..\n", - freq, sh_pclk_freq); - current_cpu_data.module_clock = freq; - } - } -#endif - -#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 - /* XXX: Update ST40 code to use board_time_init() */ - pvr = ctrl_inl(CCN_PVR); - frqcr = ctrl_inw(FRQCR); - printk("time.c ST40 Probe: PVR %08lx, FRQCR %04hx\n", pvr, frqcr); - - if (((pvr >> CCN_PVR_CHIP_SHIFT) & CCN_PVR_CHIP_MASK) == CCN_PVR_CHIP_ST40STB1) - st40_specific_time_init(current_cpu_data.module_clock, frqcr); - else -#endif - get_current_frequency_divisors(&ifc, &bfc, &pfc); + clk_init(); if (rtc_get_time) { rtc_get_time(&xtime); @@ -594,51 +179,12 @@ void __init time_init(void) set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - if (board_timer_setup) { - board_timer_setup(&irq0); - } else { - setup_irq(TIMER_IRQ, &irq0); - } - /* - * for ST40 chips the current_cpu_data should already be set - * so not having valid pfc/bfc/ifc shouldn't be a problem + * Find the timer to use as the system timer, it will be + * initialized for us. */ - if (!current_cpu_data.master_clock) - current_cpu_data.master_clock = current_cpu_data.module_clock * pfc; - if (!current_cpu_data.bus_clock) - current_cpu_data.bus_clock = current_cpu_data.master_clock / bfc; - if (!current_cpu_data.cpu_clock) - current_cpu_data.cpu_clock = current_cpu_data.master_clock / ifc; - - printk("CPU clock: %d.%02dMHz\n", - (current_cpu_data.cpu_clock / 1000000), - (current_cpu_data.cpu_clock % 1000000)/10000); - printk("Bus clock: %d.%02dMHz\n", - (current_cpu_data.bus_clock / 1000000), - (current_cpu_data.bus_clock % 1000000)/10000); -#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 - printk("Memory clock: %d.%02dMHz\n", - (current_cpu_data.memory_clock / 1000000), - (current_cpu_data.memory_clock % 1000000)/10000); -#endif - printk("Module clock: %d.%02dMHz\n", - (current_cpu_data.module_clock / 1000000), - (current_cpu_data.module_clock % 1000000)/10000); - - interval = (current_cpu_data.module_clock/4 + HZ/2) / HZ; - - printk("Interval = %ld\n", interval); - - /* Start TMU0 */ - ctrl_outb(0, TMU_TSTR); -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) - ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); -#endif - ctrl_outw(TMU0_TCR_INIT, TMU0_TCR); - ctrl_outl(interval, TMU0_TCOR); - ctrl_outl(interval, TMU0_TCNT); - ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); + sys_timer = get_sys_timer(); + printk(KERN_INFO "Using %s for system timer\n", sys_timer->name); #if defined(CONFIG_SH_KGDB) /* diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile new file mode 100644 index 00000000000..151a6a304ce --- /dev/null +++ b/arch/sh/kernel/timers/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the various Linux/SuperH timers +# + +obj-y := timer.o + +obj-$(CONFIG_SH_TMU) += timer-tmu.o + diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c new file mode 100644 index 00000000000..96a64cb1310 --- /dev/null +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -0,0 +1,229 @@ +/* + * arch/sh/kernel/timers/timer-tmu.c - TMU Timer Support + * + * Copyright (C) 2005 Paul Mundt + * + * TMU handling code hacked out of arch/sh/kernel/time.c + * + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 2002, 2003, 2004 Paul Mundt + * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/seqlock.h> +#include <asm/timer.h> +#include <asm/rtc.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/clock.h> + +#define TMU_TOCR_INIT 0x00 +#define TMU0_TCR_INIT 0x0020 +#define TMU_TSTR_INIT 1 + +#define TMU0_TCR_CALIB 0x0000 + +static DEFINE_SPINLOCK(tmu0_lock); + +static unsigned long tmu_timer_get_offset(void) +{ + int count; + unsigned long flags; + + static int count_p = 0x7fffffff; /* for the first call after boot */ + static unsigned long jiffies_p = 0; + + /* + * cache volatile jiffies temporarily; we have IRQs turned off. + */ + unsigned long jiffies_t; + + spin_lock_irqsave(&tmu0_lock, flags); + /* timer count may underflow right here */ + count = ctrl_inl(TMU0_TCNT); /* read the latched count */ + + jiffies_t = jiffies; + + /* + * avoiding timer inconsistencies (they are rare, but they happen)... + * there is one kind of problem that must be avoided here: + * 1. the timer counter underflows + */ + + if (jiffies_t == jiffies_p) { + if (count > count_p) { + /* the nutcase */ + if (ctrl_inw(TMU0_TCR) & 0x100) { /* Check UNF bit */ + count -= LATCH; + } else { + printk("%s (): hardware timer problem?\n", + __FUNCTION__); + } + } + } else + jiffies_p = jiffies_t; + + count_p = count; + spin_unlock_irqrestore(&tmu0_lock, flags); + + count = ((LATCH-1) - count) * TICK_SIZE; + count = (count + LATCH/2) / LATCH; + + return count; +} + +static irqreturn_t tmu_timer_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + unsigned long timer_status; + + /* Clear UNF bit */ + timer_status = ctrl_inw(TMU0_TCR); + timer_status &= ~0x100; + ctrl_outw(timer_status, TMU0_TCR); + + /* + * Here we are in the timer irq handler. We just have irqs locally + * disabled but we don't know if the timer_bh is running on the other + * CPU. We need to avoid to SMP race with it. NOTE: we don' t need + * the irq version of write_lock because as just said we have irq + * locally disabled. -arca + */ + write_seqlock(&xtime_lock); + handle_timer_tick(regs); + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction tmu_irq = { + .name = "timer", + .handler = tmu_timer_interrupt, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, +}; + +/* + * Hah! We'll see if this works (switching from usecs to nsecs). + */ +static unsigned long tmu_timer_get_frequency(void) +{ + u32 freq; + struct timespec ts1, ts2; + unsigned long diff_nsec; + unsigned long factor; + + /* Setup the timer: We don't want to generate interrupts, just + * have it count down at its natural rate. + */ + ctrl_outb(0, TMU_TSTR); +#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760) + ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); +#endif + ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR); + ctrl_outl(0xffffffff, TMU0_TCOR); + ctrl_outl(0xffffffff, TMU0_TCNT); + + rtc_get_time(&ts2); + + do { + rtc_get_time(&ts1); + } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); + + /* actually start the timer */ + ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); + + do { + rtc_get_time(&ts2); + } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); + + freq = 0xffffffff - ctrl_inl(TMU0_TCNT); + if (ts2.tv_nsec < ts1.tv_nsec) { + ts2.tv_nsec += 1000000000; + ts2.tv_sec--; + } + + diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec); + + /* this should work well if the RTC has a precision of n Hz, where + * n is an integer. I don't think we have to worry about the other + * cases. */ + factor = (1000000000 + diff_nsec/2) / diff_nsec; + + if (factor * diff_nsec > 1100000000 || + factor * diff_nsec < 900000000) + panic("weird RTC (diff_nsec %ld)", diff_nsec); + + return freq * factor; +} + +static void tmu_clk_init(struct clk *clk) +{ + u8 divisor = TMU0_TCR_INIT & 0x7; + ctrl_outw(TMU0_TCR_INIT, TMU0_TCR); + clk->rate = clk->parent->rate / (4 << (divisor << 1)); +} + +static void tmu_clk_recalc(struct clk *clk) +{ + u8 divisor = ctrl_inw(TMU0_TCR) & 0x7; + clk->rate = clk->parent->rate / (4 << (divisor << 1)); +} + +static struct clk_ops tmu_clk_ops = { + .init = tmu_clk_init, + .recalc = tmu_clk_recalc, +}; + +static struct clk tmu0_clk = { + .name = "tmu0_clk", + .ops = &tmu_clk_ops, +}; + +static int tmu_timer_init(void) +{ + unsigned long interval; + + setup_irq(TIMER_IRQ, &tmu_irq); + + tmu0_clk.parent = clk_get("module_clk"); + + /* Start TMU0 */ + ctrl_outb(0, TMU_TSTR); +#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760) + ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); +#endif + + clk_register(&tmu0_clk); + clk_enable(&tmu0_clk); + + interval = (clk_get_rate(&tmu0_clk) + HZ / 2) / HZ; + printk(KERN_INFO "Interval = %ld\n", interval); + + ctrl_outl(interval, TMU0_TCOR); + ctrl_outl(interval, TMU0_TCNT); + + ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); + + return 0; +} + +struct sys_timer_ops tmu_timer_ops = { + .init = tmu_timer_init, + .get_frequency = tmu_timer_get_frequency, + .get_offset = tmu_timer_get_offset, +}; + +struct sys_timer tmu_timer = { + .name = "tmu", + .ops = &tmu_timer_ops, +}; + diff --git a/arch/sh/kernel/timers/timer.c b/arch/sh/kernel/timers/timer.c new file mode 100644 index 00000000000..dc1f631053a --- /dev/null +++ b/arch/sh/kernel/timers/timer.c @@ -0,0 +1,50 @@ +/* + * arch/sh/kernel/timers/timer.c - Common timer code + * + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/string.h> +#include <asm/timer.h> + +static struct sys_timer *sys_timers[] __initdata = { +#ifdef CONFIG_SH_TMU + &tmu_timer, +#endif + NULL, +}; + +static char timer_override[10] __initdata; +static int __init timer_setup(char *str) +{ + if (str) + strlcpy(timer_override, str, sizeof(timer_override)); + return 1; +} +__setup("timer=", timer_setup); + +struct sys_timer *get_sys_timer(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(sys_timers); i++) { + struct sys_timer *t = sys_timers[i]; + + if (unlikely(!t)) + break; + if (unlikely(timer_override[0])) + if ((strcmp(timer_override, t->name) != 0)) + continue; + if (likely(t->ops->init() == 0)) + return t; + } + + return NULL; +} + diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig new file mode 100644 index 00000000000..fb586b1cf8b --- /dev/null +++ b/arch/sh/mm/Kconfig @@ -0,0 +1,233 @@ +menu "Processor selection" + +# +# Processor families +# +config CPU_SH2 + bool + select SH_WRITETHROUGH + +config CPU_SH3 + bool + select CPU_HAS_INTEVT + select CPU_HAS_SR_RB + +config CPU_SH4 + bool + select CPU_HAS_INTEVT + select CPU_HAS_SR_RB + +config CPU_SH4A + bool + select CPU_SH4 + select CPU_HAS_INTC2_IRQ + +config CPU_SUBTYPE_ST40 + bool + select CPU_SH4 + select CPU_HAS_INTC2_IRQ + +# +# Processor subtypes +# + +comment "SH-2 Processor Support" + +config CPU_SUBTYPE_SH7604 + bool "Support SH7604 processor" + select CPU_SH2 + +comment "SH-3 Processor Support" + +config CPU_SUBTYPE_SH7300 + bool "Support SH7300 processor" + select CPU_SH3 + +config CPU_SUBTYPE_SH7705 + bool "Support SH7705 processor" + select CPU_SH3 + select CPU_HAS_PINT_IRQ + +config CPU_SUBTYPE_SH7707 + bool "Support SH7707 processor" + select CPU_SH3 + select CPU_HAS_PINT_IRQ + help + Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU. + +config CPU_SUBTYPE_SH7708 + bool "Support SH7708 processor" + select CPU_SH3 + help + Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or + if you have a 100 Mhz SH-3 HD6417708R CPU. + +config CPU_SUBTYPE_SH7709 + bool "Support SH7709 processor" + select CPU_SH3 + select CPU_HAS_PINT_IRQ + help + Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. + +comment "SH-4 Processor Support" + +config CPU_SUBTYPE_SH7750 + bool "Support SH7750 processor" + select CPU_SH4 + help + Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. + +config CPU_SUBTYPE_SH7091 + bool "Support SH7091 processor" + select CPU_SH4 + select CPU_SUBTYPE_SH7750 + help + Select SH7091 if you have an SH-4 based Sega device (such as + the Dreamcast, Naomi, and Naomi 2). + +config CPU_SUBTYPE_SH7750R + bool "Support SH7750R processor" + select CPU_SH4 + select CPU_SUBTYPE_SH7750 + +config CPU_SUBTYPE_SH7750S + bool "Support SH7750S processor" + select CPU_SH4 + select CPU_SUBTYPE_SH7750 + +config CPU_SUBTYPE_SH7751 + bool "Support SH7751 processor" + select CPU_SH4 + help + Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, + or if you have a HD6417751R CPU. + +config CPU_SUBTYPE_SH7751R + bool "Support SH7751R processor" + select CPU_SH4 + select CPU_SUBTYPE_SH7751 + +config CPU_SUBTYPE_SH7760 + bool "Support SH7760 processor" + select CPU_SH4 + select CPU_HAS_INTC2_IRQ + +config CPU_SUBTYPE_SH4_202 + bool "Support SH4-202 processor" + select CPU_SH4 + +comment "ST40 Processor Support" + +config CPU_SUBTYPE_ST40STB1 + bool "Support ST40STB1/ST40RA processors" + select CPU_SUBTYPE_ST40 + help + Select ST40STB1 if you have a ST40RA CPU. + This was previously called the ST40STB1, hence the option name. + +config CPU_SUBTYPE_ST40GX1 + bool "Support ST40GX1 processor" + select CPU_SUBTYPE_ST40 + help + Select ST40GX1 if you have a ST40GX1 CPU. + +comment "SH-4A Processor Support" + +config CPU_SUBTYPE_SH73180 + bool "Support SH73180 processor" + select CPU_SH4A + +config CPU_SUBTYPE_SH7770 + bool "Support SH7770 processor" + select CPU_SH4A + +config CPU_SUBTYPE_SH7780 + bool "Support SH7780 processor" + select CPU_SH4A + +endmenu + +menu "Memory management options" + +config MMU + bool "Support for memory management hardware" + depends on !CPU_SH2 + default y + help + Some SH processors (such as SH-2/SH-2A) lack an MMU. In order to + boot on these systems, this option must not be set. + + On other systems (such as the SH-3 and 4) where an MMU exists, + turning this off will boot the kernel on these machines with the + MMU implicitly switched off. + +config 32BIT + bool "Support 32-bit physical addressing through PMB" + depends on CPU_SH4A + default y + help + If you say Y here, physical addressing will be extended to + 32-bits through the SH-4A PMB. If this is not set, legacy + 29-bit physical addressing will be used. + +choice + prompt "HugeTLB page size" + depends on HUGETLB_PAGE && CPU_SH4 && MMU + default HUGETLB_PAGE_SIZE_64K + +config HUGETLB_PAGE_SIZE_64K + bool "64K" + +config HUGETLB_PAGE_SIZE_1MB + bool "1MB" + +endchoice + +source "mm/Kconfig" + +endmenu + +menu "Cache configuration" + +config SH7705_CACHE_32KB + bool "Enable 32KB cache size for SH7705" + depends on CPU_SUBTYPE_SH7705 + default y + +config SH_DIRECT_MAPPED + bool "Use direct-mapped caching" + default n + help + Selecting this option will configure the caches to be direct-mapped, + even if the cache supports a 2 or 4-way mode. This is useful primarily + for debugging on platforms with 2 and 4-way caches (SH7750R/SH7751R, + SH4-202, SH4-501, etc.) + + Turn this option off for platforms that do not have a direct-mapped + cache, and you have no need to run the caches in such a configuration. + +config SH_WRITETHROUGH + bool "Use write-through caching" + default y if CPU_SH2 + help + Selecting this option will configure the caches in write-through + mode, as opposed to the default write-back configuration. + + Since there's sill some aliasing issues on SH-4, this option will + unfortunately still require the majority of flushing functions to + be implemented to deal with aliasing. + + If unsure, say N. + +config SH_OCRAM + bool "Operand Cache RAM (OCRAM) support" + help + Selecting this option will automatically tear down the number of + sets in the dcache by half, which in turn exposes a memory range. + + The addresses for the OC RAM base will vary according to the + processor version. Consult vendor documentation for specifics. + + If unsure, say N. + +endmenu diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c index e794e27a72f..96fa4a999e2 100644 --- a/arch/sh/mm/ioremap.c +++ b/arch/sh/mm/ioremap.c @@ -6,13 +6,19 @@ * 640k-1MB IO memory area on PC's * * (C) Copyright 1995 1996 Linus Torvalds + * (C) Copyright 2005, 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. */ - #include <linux/vmalloc.h> +#include <linux/module.h> #include <linux/mm.h> #include <asm/io.h> #include <asm/page.h> #include <asm/pgalloc.h> +#include <asm/addrspace.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> @@ -80,9 +86,15 @@ int remap_area_pages(unsigned long address, unsigned long phys_addr, if (address >= end) BUG(); do { + pud_t *pud; pmd_t *pmd; - pmd = pmd_alloc(&init_mm, dir, address); + error = -ENOMEM; + + pud = pud_alloc(&init_mm, dir, address); + if (!pud) + break; + pmd = pmd_alloc(&init_mm, pud, address); if (!pmd) break; if (remap_area_pmd(pmd, address, end - address, @@ -97,10 +109,6 @@ int remap_area_pages(unsigned long address, unsigned long phys_addr, } /* - * Generic mapping function (not visible outside): - */ - -/* * Remap an arbitrary physical address space into the kernel virtual * address space. Needed when the kernel wants to access high addresses * directly. @@ -109,11 +117,11 @@ int remap_area_pages(unsigned long address, unsigned long phys_addr, * have to convert them into an offset in a page-aligned mapping, but the * caller shouldn't need to know that small detail. */ -void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags) +void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, + unsigned long flags) { - void * addr; struct vm_struct * area; - unsigned long offset, last_addr; + unsigned long offset, last_addr, addr, orig_addr; /* Don't allow wraparound or zero size */ last_addr = phys_addr + size - 1; @@ -124,7 +132,7 @@ void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long fla * Don't remap the low PCI/ISA area, it's always mapped.. */ if (phys_addr >= 0xA0000 && last_addr < 0x100000) - return phys_to_virt(phys_addr); + return (void __iomem *)phys_to_virt(phys_addr); /* * Don't allow anybody to remap normal RAM that we're using.. @@ -146,16 +154,71 @@ void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long fla if (!area) return NULL; area->phys_addr = phys_addr; - addr = area->addr; - if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) { - vunmap(addr); - return NULL; + orig_addr = addr = (unsigned long)area->addr; + +#ifdef CONFIG_32BIT + /* + * First try to remap through the PMB once a valid VMA has been + * established. Smaller allocations (or the rest of the size + * remaining after a PMB mapping due to the size not being + * perfectly aligned on a PMB size boundary) are then mapped + * through the UTLB using conventional page tables. + * + * PMB entries are all pre-faulted. + */ + if (unlikely(size >= 0x1000000)) { + unsigned long mapped = pmb_remap(addr, phys_addr, size, flags); + + if (likely(mapped)) { + addr += mapped; + phys_addr += mapped; + size -= mapped; + } } - return (void *) (offset + (char *)addr); +#endif + + if (likely(size)) + if (remap_area_pages(addr, phys_addr, size, flags)) { + vunmap((void *)orig_addr); + return NULL; + } + + return (void __iomem *)(offset + (char *)orig_addr); } +EXPORT_SYMBOL(__ioremap); -void p3_iounmap(void *addr) +void __iounmap(void __iomem *addr) { - if (addr > high_memory) - vfree((void *)(PAGE_MASK & (unsigned long)addr)); + unsigned long vaddr = (unsigned long __force)addr; + struct vm_struct *p; + + if (PXSEG(vaddr) < P3SEG) + return; + +#ifdef CONFIG_32BIT + /* + * Purge any PMB entries that may have been established for this + * mapping, then proceed with conventional VMA teardown. + * + * XXX: Note that due to the way that remove_vm_area() does + * matching of the resultant VMA, we aren't able to fast-forward + * the address past the PMB space until the end of the VMA where + * the page tables reside. As such, unmap_vm_area() will be + * forced to linearly scan over the area until it finds the page + * tables where PTEs that need to be unmapped actually reside, + * which is far from optimal. Perhaps we need to use a separate + * VMA for the PMB mappings? + * -- PFM. + */ + pmb_unmap(vaddr); +#endif + + p = remove_vm_area((void *)(vaddr & PAGE_MASK)); + if (!p) { + printk(KERN_ERR "%s: bad address %p\n", __FUNCTION__, addr); + return; + } + + kfree(p); } +EXPORT_SYMBOL(__iounmap); diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 0693fbd1f95..182fe909257 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -10,10 +10,7 @@ SE SH_SOLUTION_ENGINE 7300SE SH_7300_SOLUTION_ENGINE 73180SE SH_73180_SOLUTION_ENGINE 7751SYSTEMH SH_7751_SYSTEMH -HP600 SH_HP600 -HP620 SH_HP620 -HP680 SH_HP680 -HP690 SH_HP690 +HP6XX SH_HP6XX HD64461 HD64461 HD64465 HD64465 SH2000 SH_SH2000 |