diff options
Diffstat (limited to 'arch/sparc/kernel')
30 files changed, 982 insertions, 1803 deletions
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 6e03a2a7863..2d658209509 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -13,15 +13,13 @@ obj-y := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \ time.o windows.o cpu.o devices.o \ tadpole.o tick14.o ptrace.o \ unaligned.o una_asm.o muldiv.o \ - prom.o of_device.o devres.o + prom.o of_device.o devres.o dma.o devres-y = ../../../kernel/irq/devres.o obj-$(CONFIG_PCI) += pcic.o -obj-$(CONFIG_SUN4) += sun4setup.o obj-$(CONFIG_SMP) += trampoline.o smp.o sun4m_smp.o sun4d_smp.o obj-$(CONFIG_SUN_AUXIO) += auxio.o -obj-$(CONFIG_PCI) += ebus.o obj-$(CONFIG_SUN_PM) += apc.o pmc.o obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o obj-$(CONFIG_SPARC_LED) += led.o diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c index 5267d48fb2c..4dd1ba752ce 100644 --- a/arch/sparc/kernel/apc.c +++ b/arch/sparc/kernel/apc.c @@ -12,9 +12,10 @@ #include <linux/miscdevice.h> #include <linux/smp_lock.h> #include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/io.h> -#include <asm/sbus.h> #include <asm/oplib.h> #include <asm/uaccess.h> #include <asm/auxio.h> @@ -29,11 +30,10 @@ #define APC_OBPNAME "power-management" #define APC_DEVNAME "apc" -volatile static u8 __iomem *regs; -static int apc_regsize; +static u8 __iomem *regs; static int apc_no_idle __initdata = 0; -#define apc_readb(offs) (sbus_readb(regs+offs)) +#define apc_readb(offs) (sbus_readb(regs+offs)) #define apc_writeb(val, offs) (sbus_writeb(val, regs+offs)) /* Specify "apc=noidle" on the kernel command line to @@ -69,9 +69,9 @@ static void apc_swift_idle(void) #endif } -static inline void apc_free(void) +static inline void apc_free(struct of_device *op) { - sbus_iounmap(regs, apc_regsize); + of_iounmap(&op->resource[0], regs, resource_size(&op->resource[0])); } static int apc_open(struct inode *inode, struct file *f) @@ -153,52 +153,56 @@ static const struct file_operations apc_fops = { static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops }; -static int __init apc_probe(void) +static int __devinit apc_probe(struct of_device *op, + const struct of_device_id *match) { - struct sbus_bus *sbus = NULL; - struct sbus_dev *sdev = NULL; - int iTmp = 0; - - for_each_sbus(sbus) { - for_each_sbusdev(sdev, sbus) { - if (!strcmp(sdev->prom_name, APC_OBPNAME)) { - goto sbus_done; - } - } - } + int err; -sbus_done: - if (!sdev) { - return -ENODEV; - } - - apc_regsize = sdev->reg_addrs[0].reg_size; - regs = sbus_ioremap(&sdev->resource[0], 0, - apc_regsize, APC_OBPNAME); - if(!regs) { + regs = of_ioremap(&op->resource[0], 0, + resource_size(&op->resource[0]), APC_OBPNAME); + if (!regs) { printk(KERN_ERR "%s: unable to map registers\n", APC_DEVNAME); return -ENODEV; } - iTmp = misc_register(&apc_miscdev); - if (iTmp != 0) { + err = misc_register(&apc_miscdev); + if (err) { printk(KERN_ERR "%s: unable to register device\n", APC_DEVNAME); - apc_free(); + apc_free(op); return -ENODEV; } /* Assign power management IDLE handler */ - if(!apc_no_idle) + if (!apc_no_idle) pm_idle = apc_swift_idle; printk(KERN_INFO "%s: power management initialized%s\n", - APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : ""); + APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : ""); + return 0; } +static struct of_device_id __initdata apc_match[] = { + { + .name = APC_OBPNAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, apc_match); + +static struct of_platform_driver apc_driver = { + .name = "apc", + .match_table = apc_match, + .probe = apc_probe, +}; + +static int __init apc_init(void) +{ + return of_register_driver(&apc_driver, &of_bus_type); +} + /* This driver is not critical to the boot process * and is easiest to ioremap when SBus is already * initialized, so we install ourselves thusly: */ -__initcall(apc_probe); - +__initcall(apc_init); diff --git a/arch/sparc/kernel/auxio.c b/arch/sparc/kernel/auxio.c index baf4ed3fb0f..09c857215a5 100644 --- a/arch/sparc/kernel/auxio.c +++ b/arch/sparc/kernel/auxio.c @@ -6,6 +6,8 @@ #include <linux/stddef.h> #include <linux/init.h> #include <linux/spinlock.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/oplib.h> #include <asm/io.h> #include <asm/auxio.h> @@ -59,7 +61,7 @@ void __init auxio_probe(void) r.flags = auxregs[0].which_io & 0xF; r.start = auxregs[0].phys_addr; r.end = auxregs[0].phys_addr + auxregs[0].reg_size - 1; - auxio_register = sbus_ioremap(&r, 0, auxregs[0].reg_size, "auxio"); + auxio_register = of_ioremap(&r, 0, auxregs[0].reg_size, "auxio"); /* Fix the address on sun4m and sun4c. */ if((((unsigned long) auxregs[0].phys_addr) & 3) == 3 || sparc_cpu_model == sun4c) @@ -128,7 +130,7 @@ void __init auxio_power_probe(void) r.flags = regs.which_io & 0xF; r.start = regs.phys_addr; r.end = regs.phys_addr + regs.reg_size - 1; - auxio_power_register = (unsigned char *) sbus_ioremap(&r, 0, + auxio_power_register = (unsigned char *) of_ioremap(&r, 0, regs.reg_size, "auxpower"); /* Display a quick message on the console. */ diff --git a/arch/sparc/kernel/devices.c b/arch/sparc/kernel/devices.c index b240b8863fd..ad656b044b8 100644 --- a/arch/sparc/kernel/devices.c +++ b/arch/sparc/kernel/devices.c @@ -143,7 +143,7 @@ void __init device_scan(void) #endif clock_stop_probe(); - if (ARCH_SUN4C_SUN4) + if (ARCH_SUN4C) sun4c_probe_memerr_reg(); return; diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c new file mode 100644 index 00000000000..ebc8403b035 --- /dev/null +++ b/arch/sparc/kernel/dma.c @@ -0,0 +1,227 @@ +/* dma.c: PCI and SBUS DMA accessors for 32-bit sparc. + * + * Copyright (C) 2008 David S. Miller <davem@davemloft.net> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/scatterlist.h> +#include <linux/mm.h> + +#ifdef CONFIG_PCI +#include <linux/pci.h> +#endif + +#include "dma.h" + +int dma_supported(struct device *dev, u64 mask) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_dma_supported(to_pci_dev(dev), mask); +#endif + return 0; +} +EXPORT_SYMBOL(dma_supported); + +int dma_set_mask(struct device *dev, u64 dma_mask) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_set_dma_mask(to_pci_dev(dev), dma_mask); +#endif + return -EOPNOTSUPP; +} +EXPORT_SYMBOL(dma_set_mask); + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle); +#endif + return sbus_alloc_consistent(dev, size, dma_handle); +} +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_free_consistent(to_pci_dev(dev), size, + cpu_addr, dma_handle); + return; + } +#endif + sbus_free_consistent(dev, size, cpu_addr, dma_handle); +} +EXPORT_SYMBOL(dma_free_coherent); + +dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_map_single(to_pci_dev(dev), cpu_addr, + size, (int)direction); +#endif + return sbus_map_single(dev, cpu_addr, size, (int)direction); +} +EXPORT_SYMBOL(dma_map_single); + +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_unmap_single(to_pci_dev(dev), dma_addr, + size, (int)direction); + return; + } +#endif + sbus_unmap_single(dev, dma_addr, size, (int)direction); +} +EXPORT_SYMBOL(dma_unmap_single); + +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_map_page(to_pci_dev(dev), page, offset, + size, (int)direction); +#endif + return sbus_map_single(dev, page_address(page) + offset, + size, (int)direction); +} +EXPORT_SYMBOL(dma_map_page); + +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_unmap_page(to_pci_dev(dev), dma_address, + size, (int)direction); + return; + } +#endif + sbus_unmap_single(dev, dma_address, size, (int)direction); +} +EXPORT_SYMBOL(dma_unmap_page); + +int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction); +#endif + return sbus_map_sg(dev, sg, nents, direction); +} +EXPORT_SYMBOL(dma_map_sg); + +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_unmap_sg(to_pci_dev(dev), sg, nents, (int)direction); + return; + } +#endif + sbus_unmap_sg(dev, sg, nents, (int)direction); +} +EXPORT_SYMBOL(dma_unmap_sg); + +void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle, + size, (int)direction); + return; + } +#endif + sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction); +} +EXPORT_SYMBOL(dma_sync_single_for_cpu); + +void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle, + size, (int)direction); + return; + } +#endif + sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction); +} +EXPORT_SYMBOL(dma_sync_single_for_device); + +void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); +} +EXPORT_SYMBOL(dma_sync_single_range_for_cpu); + +void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_device(dev, dma_handle+offset, size, direction); +} +EXPORT_SYMBOL(dma_sync_single_range_for_device); + +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, + nelems, (int)direction); + return; + } +#endif + BUG(); +} +EXPORT_SYMBOL(dma_sync_sg_for_cpu); + +void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, + nelems, (int)direction); + return; + } +#endif + BUG(); +} +EXPORT_SYMBOL(dma_sync_sg_for_device); + +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return (dma_addr == DMA_ERROR_CODE); +} +EXPORT_SYMBOL(dma_mapping_error); + +int dma_get_cache_alignment(void) +{ + return 32; +} +EXPORT_SYMBOL(dma_get_cache_alignment); diff --git a/arch/sparc/kernel/dma.h b/arch/sparc/kernel/dma.h new file mode 100644 index 00000000000..f8d8951adb5 --- /dev/null +++ b/arch/sparc/kernel/dma.h @@ -0,0 +1,14 @@ +void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp); +void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba); +dma_addr_t sbus_map_single(struct device *dev, void *va, + size_t len, int direction); +void sbus_unmap_single(struct device *dev, dma_addr_t ba, + size_t n, int direction); +int sbus_map_sg(struct device *dev, struct scatterlist *sg, + int n, int direction); +void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, + int n, int direction); +void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, + size_t size, int direction); +void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, + size_t size, int direction); diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c deleted file mode 100644 index 97294232259..00000000000 --- a/arch/sparc/kernel/ebus.c +++ /dev/null @@ -1,393 +0,0 @@ -/* - * ebus.c: PCI to EBus bridge device. - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * - * Adopted for sparc by V. Roganov and G. Raiko. - * Fixes for different platforms by Pete Zaitcev. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/string.h> - -#include <asm/system.h> -#include <asm/page.h> -#include <asm/pbm.h> -#include <asm/ebus.h> -#include <asm/io.h> -#include <asm/oplib.h> -#include <asm/prom.h> -#include <asm/bpp.h> - -struct linux_ebus *ebus_chain = NULL; - -/* We are together with pcic.c under CONFIG_PCI. */ -extern unsigned int pcic_pin_to_irq(unsigned int, const char *name); - -/* - * IRQ Blacklist - * Here we list PROMs and systems that are known to supply crap as IRQ numbers. - */ -struct ebus_device_irq { - char *name; - unsigned int pin; -}; - -struct ebus_system_entry { - char *esname; - struct ebus_device_irq *ipt; -}; - -static struct ebus_device_irq je1_1[] = { - { "8042", 3 }, - { "SUNW,CS4231", 0 }, - { "parallel", 0 }, - { "se", 2 }, - { NULL, 0 } -}; - -/* - * Gleb's JE1 supplied reasonable pin numbers, but mine did not (OBP 2.32). - * Blacklist the sucker... Note that Gleb's system will work. - */ -static struct ebus_system_entry ebus_blacklist[] = { - { "SUNW,JavaEngine1", je1_1 }, - { NULL, NULL } -}; - -static struct ebus_device_irq *ebus_blackp = NULL; - -/* - */ -static inline unsigned long ebus_alloc(size_t size) -{ - return (unsigned long)kmalloc(size, GFP_ATOMIC); -} - -/* - */ -static int __init ebus_blacklist_irq(const char *name) -{ - struct ebus_device_irq *dp; - - if ((dp = ebus_blackp) != NULL) { - for (; dp->name != NULL; dp++) { - if (strcmp(name, dp->name) == 0) { - return pcic_pin_to_irq(dp->pin, name); - } - } - } - return 0; -} - -static void __init fill_ebus_child(struct device_node *dp, - struct linux_ebus_child *dev) -{ - const int *regs; - const int *irqs; - int i, len; - - dev->prom_node = dp; - regs = of_get_property(dp, "reg", &len); - if (!regs) - len = 0; - dev->num_addrs = len / sizeof(regs[0]); - - for (i = 0; i < dev->num_addrs; i++) { - if (regs[i] >= dev->parent->num_addrs) { - prom_printf("UGH: property for %s was %d, need < %d\n", - dev->prom_node->name, len, - dev->parent->num_addrs); - panic(__func__); - } - - /* XXX resource */ - dev->resource[i].start = - dev->parent->resource[regs[i]].start; - } - - for (i = 0; i < PROMINTR_MAX; i++) - dev->irqs[i] = PCI_IRQ_NONE; - - if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) { - dev->num_irqs = 1; - } else { - irqs = of_get_property(dp, "interrupts", &len); - if (!irqs) { - dev->num_irqs = 0; - dev->irqs[0] = 0; - if (dev->parent->num_irqs != 0) { - dev->num_irqs = 1; - dev->irqs[0] = dev->parent->irqs[0]; - } - } else { - dev->num_irqs = len / sizeof(irqs[0]); - if (irqs[0] == 0 || irqs[0] >= 8) { - /* - * XXX Zero is a valid pin number... - * This works as long as Ebus is not wired - * to INTA#. - */ - printk("EBUS: %s got bad irq %d from PROM\n", - dev->prom_node->name, irqs[0]); - dev->num_irqs = 0; - dev->irqs[0] = 0; - } else { - dev->irqs[0] = - pcic_pin_to_irq(irqs[0], - dev->prom_node->name); - } - } - } -} - -static void __init fill_ebus_device(struct device_node *dp, - struct linux_ebus_device *dev) -{ - const struct linux_prom_registers *regs; - struct linux_ebus_child *child; - struct dev_archdata *sd; - const int *irqs; - int i, n, len; - unsigned long baseaddr; - - dev->prom_node = dp; - - regs = of_get_property(dp, "reg", &len); - if (!regs) - len = 0; - if (len % sizeof(struct linux_prom_registers)) { - prom_printf("UGH: proplen for %s was %d, need multiple of %d\n", - dev->prom_node->name, len, - (int)sizeof(struct linux_prom_registers)); - panic(__func__); - } - dev->num_addrs = len / sizeof(struct linux_prom_registers); - - for (i = 0; i < dev->num_addrs; i++) { - /* - * XXX Collect JE-1 PROM - * - * Example - JS-E with 3.11: - * /ebus - * regs - * 0x00000000, 0x0, 0x00000000, 0x0, 0x00000000, - * 0x82000010, 0x0, 0xf0000000, 0x0, 0x01000000, - * 0x82000014, 0x0, 0x38800000, 0x0, 0x00800000, - * ranges - * 0x00, 0x00000000, 0x02000010, 0x0, 0x0, 0x01000000, - * 0x01, 0x01000000, 0x02000014, 0x0, 0x0, 0x00800000, - * /ebus/8042 - * regs - * 0x00000001, 0x00300060, 0x00000008, - * 0x00000001, 0x00300060, 0x00000008, - */ - n = regs[i].which_io; - if (n >= 4) { - /* XXX This is copied from old JE-1 by Gleb. */ - n = (regs[i].which_io - 0x10) >> 2; - } else { - ; - } - -/* - * XXX Now as we have regions, why don't we make an on-demand allocation... - */ - dev->resource[i].start = 0; - if ((baseaddr = dev->bus->self->resource[n].start + - regs[i].phys_addr) != 0) { - /* dev->resource[i].name = dev->prom_name; */ - if ((baseaddr = (unsigned long) ioremap(baseaddr, - regs[i].reg_size)) == 0) { - panic("ebus: unable to remap dev %s", - dev->prom_node->name); - } - } - dev->resource[i].start = baseaddr; /* XXX Unaligned */ - } - - for (i = 0; i < PROMINTR_MAX; i++) - dev->irqs[i] = PCI_IRQ_NONE; - - if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) { - dev->num_irqs = 1; - } else { - irqs = of_get_property(dp, "interrupts", &len); - if (!irqs) { - dev->num_irqs = 0; - if ((dev->irqs[0] = dev->bus->self->irq) != 0) { - dev->num_irqs = 1; -/* P3 */ /* printk("EBUS: child %s irq %d from parent\n", dev->prom_name, dev->irqs[0]); */ - } - } else { - dev->num_irqs = 1; /* dev->num_irqs = len / sizeof(irqs[0]); */ - if (irqs[0] == 0 || irqs[0] >= 8) { - /* See above for the parent. XXX */ - printk("EBUS: %s got bad irq %d from PROM\n", - dev->prom_node->name, irqs[0]); - dev->num_irqs = 0; - dev->irqs[0] = 0; - } else { - dev->irqs[0] = - pcic_pin_to_irq(irqs[0], - dev->prom_node->name); - } - } - } - - sd = &dev->ofdev.dev.archdata; - sd->prom_node = dp; - sd->op = &dev->ofdev; - sd->iommu = dev->bus->ofdev.dev.parent->archdata.iommu; - - dev->ofdev.node = dp; - dev->ofdev.dev.parent = &dev->bus->ofdev.dev; - dev->ofdev.dev.bus = &ebus_bus_type; - sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node); - - /* Register with core */ - if (of_device_register(&dev->ofdev) != 0) - printk(KERN_DEBUG "ebus: device registration error for %s!\n", - dp->path_component_name); - - if ((dp = dp->child) != NULL) { - dev->children = (struct linux_ebus_child *) - ebus_alloc(sizeof(struct linux_ebus_child)); - - child = dev->children; - child->next = NULL; - child->parent = dev; - child->bus = dev->bus; - fill_ebus_child(dp, child); - - while ((dp = dp->sibling) != NULL) { - child->next = (struct linux_ebus_child *) - ebus_alloc(sizeof(struct linux_ebus_child)); - - child = child->next; - child->next = NULL; - child->parent = dev; - child->bus = dev->bus; - fill_ebus_child(dp, child); - } - } -} - -void __init ebus_init(void) -{ - const struct linux_prom_pci_registers *regs; - struct linux_pbm_info *pbm; - struct linux_ebus_device *dev; - struct linux_ebus *ebus; - struct ebus_system_entry *sp; - struct pci_dev *pdev; - struct pcidev_cookie *cookie; - struct device_node *dp; - struct resource *p; - unsigned short pci_command; - int len, reg, nreg; - int num_ebus = 0; - - dp = of_find_node_by_path("/"); - for (sp = ebus_blacklist; sp->esname != NULL; sp++) { - if (strcmp(dp->name, sp->esname) == 0) { - ebus_blackp = sp->ipt; - break; - } - } - - pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_EBUS, NULL); - if (!pdev) - return; - - cookie = pdev->sysdata; - dp = cookie->prom_node; - - ebus_chain = ebus = (struct linux_ebus *) - ebus_alloc(sizeof(struct linux_ebus)); - ebus->next = NULL; - - while (dp) { - struct device_node *nd; - - ebus->prom_node = dp; - ebus->self = pdev; - ebus->parent = pbm = cookie->pbm; - - /* Enable BUS Master. */ - pci_read_config_word(pdev, PCI_COMMAND, &pci_command); - pci_command |= PCI_COMMAND_MASTER; - pci_write_config_word(pdev, PCI_COMMAND, pci_command); - - regs = of_get_property(dp, "reg", &len); - if (!regs) { - prom_printf("%s: can't find reg property\n", - __func__); - prom_halt(); - } - nreg = len / sizeof(struct linux_prom_pci_registers); - - p = &ebus->self->resource[0]; - for (reg = 0; reg < nreg; reg++) { - if (!(regs[reg].which_io & 0x03000000)) - continue; - - (p++)->start = regs[reg].phys_lo; - } - - ebus->ofdev.node = dp; - ebus->ofdev.dev.parent = &pdev->dev; - ebus->ofdev.dev.bus = &ebus_bus_type; - sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus); - - /* Register with core */ - if (of_device_register(&ebus->ofdev) != 0) - printk(KERN_DEBUG "ebus: device registration error for %s!\n", - dp->path_component_name); - - - nd = dp->child; - if (!nd) - goto next_ebus; - - ebus->devices = (struct linux_ebus_device *) - ebus_alloc(sizeof(struct linux_ebus_device)); - - dev = ebus->devices; - dev->next = NULL; - dev->children = NULL; - dev->bus = ebus; - fill_ebus_device(nd, dev); - - while ((nd = nd->sibling) != NULL) { - dev->next = (struct linux_ebus_device *) - ebus_alloc(sizeof(struct linux_ebus_device)); - - dev = dev->next; - dev->next = NULL; - dev->children = NULL; - dev->bus = ebus; - fill_ebus_device(nd, dev); - } - - next_ebus: - pdev = pci_get_device(PCI_VENDOR_ID_SUN, - PCI_DEVICE_ID_SUN_EBUS, pdev); - if (!pdev) - break; - - cookie = pdev->sysdata; - dp = cookie->prom_node; - - ebus->next = (struct linux_ebus *) - ebus_alloc(sizeof(struct linux_ebus)); - ebus = ebus->next; - ebus->next = NULL; - ++num_ebus; - } - if (pdev) - pci_dev_put(pdev); -} diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index e8cdf715a54..faf9ccd9ef5 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -20,11 +20,7 @@ #include <asm/memreg.h> #include <asm/page.h> #include <asm/pgtable.h> -#ifdef CONFIG_SUN4 -#include <asm/pgtsun4.h> -#else #include <asm/pgtsun4c.h> -#endif #include <asm/winmacro.h> #include <asm/signal.h> #include <asm/obio.h> @@ -276,17 +272,18 @@ smp4m_ticker: */ maybe_smp4m_msg: GET_PROCESSOR4M_ID(o3) - set sun4m_interrupts, %l5 - ld [%l5], %o5 + sethi %hi(sun4m_irq_percpu), %l5 + sll %o3, 2, %o3 + or %l5, %lo(sun4m_irq_percpu), %o5 sethi %hi(0x40000000), %o2 - sll %o3, 12, %o3 ld [%o5 + %o3], %o1 - andcc %o1, %o2, %g0 + ld [%o1 + 0x00], %o3 ! sun4m_irq_percpu[cpu]->pending + andcc %o3, %o2, %g0 be,a smp4m_ticker cmp %l7, 14 - st %o2, [%o5 + 0x4] + st %o2, [%o1 + 0x04] ! sun4m_irq_percpu[cpu]->clear=0x40000000 WRITE_PAUSE - ld [%o5], %g0 + ld [%o1 + 0x00], %g0 ! sun4m_irq_percpu[cpu]->pending WRITE_PAUSE or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr @@ -304,16 +301,16 @@ linux_trap_ipi15_sun4m: SAVE_ALL sethi %hi(0x80000000), %o2 GET_PROCESSOR4M_ID(o0) - set sun4m_interrupts, %l5 - ld [%l5], %o5 - sll %o0, 12, %o0 - add %o5, %o0, %o5 - ld [%o5], %o3 + sethi %hi(sun4m_irq_percpu), %l5 + or %l5, %lo(sun4m_irq_percpu), %o5 + sll %o0, 2, %o0 + ld [%o5 + %o0], %o5 + ld [%o5 + 0x00], %o3 ! sun4m_irq_percpu[cpu]->pending andcc %o3, %o2, %g0 be 1f ! Must be an NMI async memory error - st %o2, [%o5 + 4] + st %o2, [%o5 + 0x04] ! sun4m_irq_percpu[cpu]->clear=0x80000000 WRITE_PAUSE - ld [%o5], %g0 + ld [%o5 + 0x00], %g0 ! sun4m_irq_percpu[cpu]->pending WRITE_PAUSE or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr @@ -327,12 +324,11 @@ linux_trap_ipi15_sun4m: 1: /* NMI async memory error handling. */ sethi %hi(0x80000000), %l4 - sethi %hi(0x4000), %o3 - sub %o5, %o0, %o5 - add %o5, %o3, %l5 - st %l4, [%l5 + 0xc] + sethi %hi(sun4m_irq_global), %o5 + ld [%o5 + %lo(sun4m_irq_global)], %l5 + st %l4, [%l5 + 0x0c] ! sun4m_irq_global->mask_set=0x80000000 WRITE_PAUSE - ld [%l5], %g0 + ld [%l5 + 0x00], %g0 ! sun4m_irq_global->pending WRITE_PAUSE or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr @@ -341,9 +337,9 @@ linux_trap_ipi15_sun4m: WRITE_PAUSE call sun4m_nmi nop - st %l4, [%l5 + 0x8] + st %l4, [%l5 + 0x08] ! sun4m_irq_global->mask_clear=0x80000000 WRITE_PAUSE - ld [%l5], %g0 + ld [%l5 + 0x00], %g0 ! sun4m_irq_global->pending WRITE_PAUSE RESTORE_ALL @@ -775,11 +771,7 @@ vac_linesize_patch_32: subcc %l7, 32, %l7 * Ugly, but we cant use hardware flushing on the sun4 and we'd require * two instructions (Anton) */ -#ifdef CONFIG_SUN4 -vac_hwflush_patch1_on: nop -#else vac_hwflush_patch1_on: addcc %l7, -PAGE_SIZE, %l7 -#endif vac_hwflush_patch2_on: sta %g0, [%l3 + %l7] ASI_HWFLUSHSEG @@ -798,42 +790,10 @@ vac_hwflush_patch2_on: sta %g0, [%l3 + %l7] ASI_HWFLUSHSEG ! %l7 = 1 for textfault ! We want error in %l5, vaddr in %l6 sun4c_fault: -#ifdef CONFIG_SUN4 - sethi %hi(sun4c_memerr_reg), %l4 - ld [%l4+%lo(sun4c_memerr_reg)], %l4 ! memerr ctrl reg addr - ld [%l4], %l6 ! memerr ctrl reg - ld [%l4 + 4], %l5 ! memerr vaddr reg - andcc %l6, 0x80, %g0 ! check for error type - st %g0, [%l4 + 4] ! clear the error - be 0f ! normal error - sethi %hi(AC_BUS_ERROR), %l4 ! bus err reg addr - - call prom_halt ! something weird happened - ! what exactly did happen? - ! what should we do here? - -0: or %l4, %lo(AC_BUS_ERROR), %l4 ! bus err reg addr - lduba [%l4] ASI_CONTROL, %l6 ! bus err reg - - cmp %l7, 1 ! text fault? - be 1f ! yes - nop - - ld [%l1], %l4 ! load instruction that caused fault - srl %l4, 21, %l4 - andcc %l4, 1, %g0 ! store instruction? - - be 1f ! no - sethi %hi(SUN4C_SYNC_BADWRITE), %l4 ! yep - ! %lo(SUN4C_SYNC_BADWRITE) = 0 - or %l4, %l6, %l6 ! set write bit to emulate sun4c -1: -#else sethi %hi(AC_SYNC_ERR), %l4 add %l4, 0x4, %l6 ! AC_SYNC_VA in %l6 lda [%l6] ASI_CONTROL, %l5 ! Address lda [%l4] ASI_CONTROL, %l6 ! Error, retained for a bit -#endif andn %l5, 0xfff, %l5 ! Encode all info into l7 srl %l6, 14, %l4 @@ -880,12 +840,7 @@ sun4c_fault: or %l4, %lo(swapper_pg_dir), %l4 sll %l6, 2, %l6 ld [%l4 + %l6], %l4 -#ifdef CONFIG_SUN4 - sethi %hi(PAGE_MASK), %l6 - andcc %l4, %l6, %g0 -#else andcc %l4, PAGE_MASK, %g0 -#endif be sun4c_fault_fromuser lduXa [%l5] ASI_SEGMAP, %l4 @@ -937,11 +892,7 @@ invalid_segment_patch1: ld [%l6 + 0x08], %l3 ! tmp = entry->vaddr ! Flush segment from the cache. -#ifdef CONFIG_SUN4 - sethi %hi((128 * 1024)), %l7 -#else sethi %hi((64 * 1024)), %l7 -#endif 9: vac_hwflush_patch1: vac_linesize_patch: @@ -1029,12 +980,7 @@ invalid_segment_patch2: or %l4, %lo(swapper_pg_dir), %l4 sll %l3, 2, %l3 ld [%l4 + %l3], %l4 -#ifndef CONFIG_SUN4 and %l4, PAGE_MASK, %l4 -#else - sethi %hi(PAGE_MASK), %l6 - and %l4, %l6, %l4 -#endif srl %l5, (PAGE_SHIFT - 2), %l6 and %l6, ((SUN4C_PTRS_PER_PTE - 1) << 2), %l6 diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S index 50d9a16af79..2d325fd8457 100644 --- a/arch/sparc/kernel/head.S +++ b/arch/sparc/kernel/head.S @@ -63,15 +63,9 @@ cputypvar_sun4m: .align 4 -#ifndef CONFIG_SUN4 sun4_notsup: - .asciz "Sparc-Linux sun4 needs a specially compiled kernel, turn CONFIG_SUN4 on.\n\n" + .asciz "Sparc-Linux sun4 support does no longer exist.\n\n" .align 4 -#else -sun4cdm_notsup: - .asciz "Kernel compiled with CONFIG_SUN4 cannot run on SUN4C/SUN4M/SUN4D\nTurn CONFIG_SUN4 off.\n\n" - .align 4 -#endif sun4e_notsup: .asciz "Sparc-Linux sun4e support does not exist\n\n" @@ -780,15 +774,6 @@ execute_in_high_mem: nop found_version: -#ifdef CONFIG_SUN4 -/* For people who try sun4 kernels, even if Configure.help advises them. */ - ld [%g7 + 0x68], %o1 - set sun4cdm_notsup, %o0 - call %o1 - nop - b halt_me - nop -#endif /* Get the machine type via the mysterious romvec node operations. */ add %g7, 0x1c, %l1 @@ -1150,15 +1135,6 @@ sun4c_continue_boot: nop sun4_init: -#ifdef CONFIG_SUN4 -/* There, happy now Adrian? */ - set cputypval, %o2 ! Let everyone know we - set ' ', %o0 ! are a "sun4 " architecture - stb %o0, [%o2 + 0x4] - - b got_prop - nop -#else sethi %hi(SUN4_PROM_VECTOR+0x84), %o1 ld [%o1 + %lo(SUN4_PROM_VECTOR+0x84)], %o1 set sun4_notsup, %o0 @@ -1170,7 +1146,7 @@ sun4_init: nop 1: ba 1b ! Cannot exit into KMON nop -#endif + no_sun4e_here: ld [%g7 + 0x68], %o1 set sun4e_notsup, %o0 diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c index fc511f3c4c1..223a6582e1e 100644 --- a/arch/sparc/kernel/idprom.c +++ b/arch/sparc/kernel/idprom.c @@ -12,10 +12,6 @@ #include <asm/oplib.h> #include <asm/idprom.h> #include <asm/machines.h> /* Fun with Sun released architectures. */ -#ifdef CONFIG_SUN4 -#include <asm/sun4paddr.h> -extern void sun4setup(void); -#endif struct idprom *idprom; static struct idprom idprom_buffer; @@ -101,7 +97,4 @@ void __init idprom_init(void) idprom->id_ethaddr[0], idprom->id_ethaddr[1], idprom->id_ethaddr[2], idprom->id_ethaddr[3], idprom->id_ethaddr[4], idprom->id_ethaddr[5]); -#ifdef CONFIG_SUN4 - sun4setup(); -#endif } diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c index 2a8a847764d..4f025b36934 100644 --- a/arch/sparc/kernel/ioport.c +++ b/arch/sparc/kernel/ioport.c @@ -42,10 +42,13 @@ #include <asm/vaddrs.h> #include <asm/oplib.h> #include <asm/prom.h> -#include <asm/sbus.h> #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/dma.h> +#include <asm/iommu.h> +#include <asm/io-unit.h> + +#include "dma.h" #define mmu_inval_dma_area(p, l) /* Anton pulled it out for 2.4.0-xx */ @@ -139,15 +142,6 @@ void iounmap(volatile void __iomem *virtual) } } -/* - */ -void __iomem *sbus_ioremap(struct resource *phyres, unsigned long offset, - unsigned long size, char *name) -{ - return _sparc_alloc_io(phyres->flags & 0xF, - phyres->start + offset, size, name); -} - void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name) { @@ -164,13 +158,6 @@ void of_iounmap(struct resource *res, void __iomem *base, unsigned long size) EXPORT_SYMBOL(of_iounmap); /* - */ -void sbus_iounmap(volatile void __iomem *addr, unsigned long size) -{ - iounmap(addr); -} - -/* * Meat of mapping */ static void __iomem *_sparc_alloc_io(unsigned int busno, unsigned long phys, @@ -246,63 +233,19 @@ static void _sparc_free_io(struct resource *res) #ifdef CONFIG_SBUS -void sbus_set_sbus64(struct sbus_dev *sdev, int x) +void sbus_set_sbus64(struct device *dev, int x) { printk("sbus_set_sbus64: unsupported\n"); } -extern unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq); -void __init sbus_fill_device_irq(struct sbus_dev *sdev) -{ - struct linux_prom_irqs irqs[PROMINTR_MAX]; - int len; - - len = prom_getproperty(sdev->prom_node, "intr", - (char *)irqs, sizeof(irqs)); - if (len != -1) { - sdev->num_irqs = len / 8; - if (sdev->num_irqs == 0) { - sdev->irqs[0] = 0; - } else if (sparc_cpu_model == sun4d) { - for (len = 0; len < sdev->num_irqs; len++) - sdev->irqs[len] = - sun4d_build_irq(sdev, irqs[len].pri); - } else { - for (len = 0; len < sdev->num_irqs; len++) - sdev->irqs[len] = irqs[len].pri; - } - } else { - int interrupts[PROMINTR_MAX]; - - /* No "intr" node found-- check for "interrupts" node. - * This node contains SBus interrupt levels, not IPLs - * as in "intr", and no vector values. We convert - * SBus interrupt levels to PILs (platform specific). - */ - len = prom_getproperty(sdev->prom_node, "interrupts", - (char *)interrupts, sizeof(interrupts)); - if (len == -1) { - sdev->irqs[0] = 0; - sdev->num_irqs = 0; - } else { - sdev->num_irqs = len / sizeof(int); - for (len = 0; len < sdev->num_irqs; len++) { - sdev->irqs[len] = - sbint_to_irq(sdev, interrupts[len]); - } - } - } -} - /* * Allocate a chunk of memory suitable for DMA. * Typically devices use them for control blocks. * CPU may access them without any explicit flushing. - * - * XXX Some clever people know that sdev is not used and supply NULL. Watch. */ -void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp) +void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp) { + struct of_device *op = to_of_device(dev); unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK; unsigned long va; struct resource *res; @@ -336,13 +279,10 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp) * XXX That's where sdev would be used. Currently we load * all iommu tables with the same translations. */ - if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0) + if (mmu_map_dma_area(dev, dma_addrp, va, res->start, len_total) != 0) goto err_noiommu; - /* Set the resource name, if known. */ - if (sdev) { - res->name = sdev->prom_name; - } + res->name = op->node->name; return (void *)(unsigned long)res->start; @@ -356,7 +296,7 @@ err_nopages: return NULL; } -void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba) +void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba) { struct resource *res; struct page *pgv; @@ -383,8 +323,8 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba) kfree(res); /* mmu_inval_dma_area(va, n); */ /* it's consistent, isn't it */ - pgv = mmu_translate_dvma(ba); - mmu_unmap_dma_area(ba, n); + pgv = virt_to_page(p); + mmu_unmap_dma_area(dev, ba, n); __free_pages(pgv, get_order(n)); } @@ -394,7 +334,7 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba) * CPU view of this memory may be inconsistent with * a device view and explicit flushing is necessary. */ -dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int direction) +dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int direction) { /* XXX why are some lengths signed, others unsigned? */ if (len <= 0) { @@ -404,17 +344,17 @@ dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int dire if (len > 256*1024) { /* __get_free_pages() limit */ return 0; } - return mmu_get_scsi_one(va, len, sdev->bus); + return mmu_get_scsi_one(dev, va, len); } -void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t ba, size_t n, int direction) +void sbus_unmap_single(struct device *dev, dma_addr_t ba, size_t n, int direction) { - mmu_release_scsi_one(ba, n, sdev->bus); + mmu_release_scsi_one(dev, ba, n); } -int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) +int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction) { - mmu_get_scsi_sgl(sg, n, sdev->bus); + mmu_get_scsi_sgl(dev, sg, n); /* * XXX sparc64 can return a partial length here. sun4c should do this @@ -423,145 +363,28 @@ int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direct return n; } -void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) -{ - mmu_release_scsi_sgl(sg, n, sdev->bus); -} - -/* - */ -void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction) -{ -#if 0 - unsigned long va; - struct resource *res; - - /* We do not need the resource, just print a message if invalid. */ - res = _sparc_find_resource(&_sparc_dvma, ba); - if (res == NULL) - panic("sbus_dma_sync_single: 0x%x\n", ba); - - va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */ - /* - * XXX This bogosity will be fixed with the iommu rewrite coming soon - * to a kernel near you. - Anton - */ - /* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */ -#endif -} - -void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction) +void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n, int direction) { -#if 0 - unsigned long va; - struct resource *res; - - /* We do not need the resource, just print a message if invalid. */ - res = _sparc_find_resource(&_sparc_dvma, ba); - if (res == NULL) - panic("sbus_dma_sync_single: 0x%x\n", ba); - - va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */ - /* - * XXX This bogosity will be fixed with the iommu rewrite coming soon - * to a kernel near you. - Anton - */ - /* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */ -#endif + mmu_release_scsi_sgl(dev, sg, n); } -void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) +void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, size_t size, int direction) { - printk("sbus_dma_sync_sg_for_cpu: not implemented yet\n"); } -void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) +void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t size, int direction) { - printk("sbus_dma_sync_sg_for_device: not implemented yet\n"); -} - -/* Support code for sbus_init(). */ -/* - * XXX This functions appears to be a distorted version of - * prom_sbus_ranges_init(), with all sun4d stuff cut away. - * Ask DaveM what is going on here, how is sun4d supposed to work... XXX - */ -/* added back sun4d patch from Thomas Bogendoerfer - should be OK (crn) */ -void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus) -{ - int parent_node = pn->node; - - if (sparc_cpu_model == sun4d) { - struct linux_prom_ranges iounit_ranges[PROMREG_MAX]; - int num_iounit_ranges, len; - - len = prom_getproperty(parent_node, "ranges", - (char *) iounit_ranges, - sizeof (iounit_ranges)); - if (len != -1) { - num_iounit_ranges = - (len / sizeof(struct linux_prom_ranges)); - prom_adjust_ranges(sbus->sbus_ranges, - sbus->num_sbus_ranges, - iounit_ranges, num_iounit_ranges); - } - } } -void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp) -{ -#ifndef CONFIG_SUN4 - struct device_node *parent = dp->parent; - - if (sparc_cpu_model != sun4d && - parent != NULL && - !strcmp(parent->name, "iommu")) { - extern void iommu_init(int iommu_node, struct sbus_bus *sbus); - - iommu_init(parent->node, sbus); - } - - if (sparc_cpu_model == sun4d) { - extern void iounit_init(int sbi_node, int iounit_node, - struct sbus_bus *sbus); - - iounit_init(dp->node, parent->node, sbus); - } -#endif -} - -void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp) -{ - if (sparc_cpu_model == sun4d) { - struct device_node *parent = dp->parent; - - sbus->devid = of_getintprop_default(parent, "device-id", 0); - sbus->board = of_getintprop_default(parent, "board#", 0); - } -} - -int __init sbus_arch_preinit(void) +static int __init sparc_register_ioport(void) { register_proc_sparc_ioport(); -#ifdef CONFIG_SUN4 - { - extern void sun4_dvma_init(void); - sun4_dvma_init(); - } - return 1; -#else return 0; -#endif } -void __init sbus_arch_postinit(void) -{ - if (sparc_cpu_model == sun4d) { - extern void sun4d_init_sbi_irq(void); - sun4d_init_sbi_irq(); - } -} +arch_initcall(sparc_register_ioport); + #endif /* CONFIG_SBUS */ #ifdef CONFIG_PCI diff --git a/arch/sparc/kernel/irq.h b/arch/sparc/kernel/irq.h index 32ef3ebd0a8..db751388153 100644 --- a/arch/sparc/kernel/irq.h +++ b/arch/sparc/kernel/irq.h @@ -13,7 +13,6 @@ BTFIXUPDEF_CALL(void, enable_irq, unsigned int) BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int) BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int) BTFIXUPDEF_CALL(void, clear_clock_irq, void) -BTFIXUPDEF_CALL(void, clear_profile_irq, int) BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int) static inline void __disable_irq(unsigned int irq) @@ -41,11 +40,6 @@ static inline void clear_clock_irq(void) BTFIXUP_CALL(clear_clock_irq)(); } -static inline void clear_profile_irq(int irq) -{ - BTFIXUP_CALL(clear_profile_irq)(irq); -} - static inline void load_profile_irq(int cpu, int limit) { BTFIXUP_CALL(load_profile_irq)(cpu, limit); diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c index c481d45f97b..0837bd52e28 100644 --- a/arch/sparc/kernel/of_device.c +++ b/arch/sparc/kernel/of_device.c @@ -29,15 +29,38 @@ struct of_device *of_find_device_by_node(struct device_node *dp) } EXPORT_SYMBOL(of_find_device_by_node); -#ifdef CONFIG_PCI -struct bus_type ebus_bus_type; -EXPORT_SYMBOL(ebus_bus_type); -#endif +unsigned int irq_of_parse_and_map(struct device_node *node, int index) +{ + struct of_device *op = of_find_device_by_node(node); + + if (!op || index >= op->num_irqs) + return 0; + + return op->irqs[index]; +} +EXPORT_SYMBOL(irq_of_parse_and_map); + +/* Take the archdata values for IOMMU, STC, and HOSTDATA found in + * BUS and propagate to all child of_device objects. + */ +void of_propagate_archdata(struct of_device *bus) +{ + struct dev_archdata *bus_sd = &bus->dev.archdata; + struct device_node *bus_dp = bus->node; + struct device_node *dp; + + for (dp = bus_dp->child; dp; dp = dp->sibling) { + struct of_device *op = of_find_device_by_node(dp); -#ifdef CONFIG_SBUS -struct bus_type sbus_bus_type; -EXPORT_SYMBOL(sbus_bus_type); -#endif + op->dev.archdata.iommu = bus_sd->iommu; + op->dev.archdata.stc = bus_sd->stc; + op->dev.archdata.host_controller = bus_sd->host_controller; + op->dev.archdata.numa_node = bus_sd->numa_node; + + if (dp->child) + of_propagate_archdata(op); + } +} struct bus_type of_platform_bus_type; EXPORT_SYMBOL(of_platform_bus_type); @@ -241,7 +264,7 @@ static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna) return of_bus_default_map(addr, range, na, ns, pna); } -static unsigned int of_bus_sbus_get_flags(const u32 *addr) +static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags) { return IORESOURCE_MEM; } @@ -327,6 +350,27 @@ static int __init build_one_resource(struct device_node *parent, return 1; } +static int __init use_1to1_mapping(struct device_node *pp) +{ + /* If we have a ranges property in the parent, use it. */ + if (of_find_property(pp, "ranges", NULL) != NULL) + return 0; + + /* Some SBUS devices use intermediate nodes to express + * hierarchy within the device itself. These aren't + * real bus nodes, and don't have a 'ranges' property. + * But, we should still pass the translation work up + * to the SBUS itself. + */ + if (!strcmp(pp->name, "dma") || + !strcmp(pp->name, "espdma") || + !strcmp(pp->name, "ledma") || + !strcmp(pp->name, "lebuffer")) + return 0; + + return 1; +} + static int of_resource_verbose; static void __init build_device_resources(struct of_device *op, @@ -373,10 +417,7 @@ static void __init build_device_resources(struct of_device *op, flags = bus->get_flags(reg, 0); - /* If the immediate parent has no ranges property to apply, - * just use a 1<->1 mapping. - */ - if (of_find_property(pp, "ranges", NULL) == NULL) { + if (use_1to1_mapping(pp)) { result = of_read_addr(addr, na); goto build_res; } @@ -565,15 +606,6 @@ static int __init of_bus_driver_init(void) int err; err = of_bus_type_init(&of_platform_bus_type, "of"); -#ifdef CONFIG_PCI - if (!err) - err = of_bus_type_init(&ebus_bus_type, "ebus"); -#endif -#ifdef CONFIG_SBUS - if (!err) - err = of_bus_type_init(&sbus_bus_type, "sbus"); -#endif - if (!err) scan_of_devices(); diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index a6a6f982337..462584e55fb 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -17,8 +17,6 @@ #include <linux/slab.h> #include <linux/jiffies.h> -#include <asm/ebus.h> -#include <asm/sbus.h> /* for sanity check... */ #include <asm/swift.h> /* for cache flushing. */ #include <asm/io.h> @@ -430,7 +428,6 @@ static int __init pcic_init(void) pcic_pbm_scan_bus(pcic); - ebus_init(); return 0; } @@ -493,10 +490,6 @@ static void pcic_map_pci_device(struct linux_pcic *pcic, * do ioremap() before accessing PC-style I/O, * we supply virtual, ready to access address. * - * Ebus devices do not come here even if - * CheerIO makes a similar conversion. - * See ebus.c for details. - * * Note that request_region() * works for these devices. * @@ -677,7 +670,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) } /* - * pcic_pin_to_irq() is exported to ebus.c. + * pcic_pin_to_irq() is exported to bus probing code */ unsigned int pcic_pin_to_irq(unsigned int pin, const char *name) @@ -904,11 +897,6 @@ static void pcic_enable_irq(unsigned int irq_nr) local_irq_restore(flags); } -static void pcic_clear_profile_irq(int cpu) -{ - printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__); -} - static void pcic_load_profile_irq(int cpu, unsigned int limit) { printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__); @@ -934,7 +922,6 @@ void __init sun4m_pci_init_IRQ(void) BTFIXUPSET_CALL(enable_pil_irq, pcic_enable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_pil_irq, pcic_disable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(clear_profile_irq, pcic_clear_profile_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM); } diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c index 7eca8871ff4..2afcfab4f11 100644 --- a/arch/sparc/kernel/pmc.c +++ b/arch/sparc/kernel/pmc.c @@ -8,11 +8,11 @@ #include <linux/fs.h> #include <linux/errno.h> #include <linux/init.h> -#include <linux/miscdevice.h> #include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/io.h> -#include <asm/sbus.h> #include <asm/oplib.h> #include <asm/uaccess.h> #include <asm/auxio.h> @@ -23,17 +23,15 @@ * #define PMC_NO_IDLE */ -#define PMC_MINOR MISC_DYNAMIC_MINOR #define PMC_OBPNAME "SUNW,pmc" #define PMC_DEVNAME "pmc" #define PMC_IDLE_REG 0x00 #define PMC_IDLE_ON 0x01 -volatile static u8 __iomem *regs; -static int pmc_regsize; +static u8 __iomem *regs; -#define pmc_readb(offs) (sbus_readb(regs+offs)) +#define pmc_readb(offs) (sbus_readb(regs+offs)) #define pmc_writeb(val, offs) (sbus_writeb(val, regs+offs)) /* @@ -53,31 +51,11 @@ void pmc_swift_idle(void) #endif } -static inline void pmc_free(void) +static int __devinit pmc_probe(struct of_device *op, + const struct of_device_id *match) { - sbus_iounmap(regs, pmc_regsize); -} - -static int __init pmc_probe(void) -{ - struct sbus_bus *sbus = NULL; - struct sbus_dev *sdev = NULL; - for_each_sbus(sbus) { - for_each_sbusdev(sdev, sbus) { - if (!strcmp(sdev->prom_name, PMC_OBPNAME)) { - goto sbus_done; - } - } - } - -sbus_done: - if (!sdev) { - return -ENODEV; - } - - pmc_regsize = sdev->reg_addrs[0].reg_size; - regs = sbus_ioremap(&sdev->resource[0], 0, - pmc_regsize, PMC_OBPNAME); + regs = of_ioremap(&op->resource[0], 0, + resource_size(&op->resource[0]), PMC_OBPNAME); if (!regs) { printk(KERN_ERR "%s: unable to map registers\n", PMC_DEVNAME); return -ENODEV; @@ -92,8 +70,27 @@ sbus_done: return 0; } +static struct of_device_id __initdata pmc_match[] = { + { + .name = PMC_OBPNAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, pmc_match); + +static struct of_platform_driver pmc_driver = { + .name = "pmc", + .match_table = pmc_match, + .probe = pmc_probe, +}; + +static int __init pmc_init(void) +{ + return of_register_driver(&pmc_driver, &of_bus_type); +} + /* This driver is not critical to the boot process * and is easiest to ioremap when SBus is already * initialized, so we install ourselves thusly: */ -__initcall(pmc_probe); +__initcall(pmc_init); diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c index 4bb430940a6..e8c43ffe317 100644 --- a/arch/sparc/kernel/process.c +++ b/arch/sparc/kernel/process.c @@ -75,7 +75,7 @@ void cpu_idle(void) { /* endless idle loop with no priority at all */ for (;;) { - if (ARCH_SUN4C_SUN4) { + if (ARCH_SUN4C) { static int count = HZ; static unsigned long last_jiffies; static unsigned long last_faults; diff --git a/arch/sparc/kernel/prom.c b/arch/sparc/kernel/prom.c index cd4fb79aa3a..eee5efcfe50 100644 --- a/arch/sparc/kernel/prom.c +++ b/arch/sparc/kernel/prom.c @@ -54,6 +54,9 @@ int of_getintprop_default(struct device_node *np, const char *name, int def) } EXPORT_SYMBOL(of_getintprop_default); +DEFINE_MUTEX(of_set_property_mutex); +EXPORT_SYMBOL(of_set_property_mutex); + int of_set_property(struct device_node *dp, const char *name, void *val, int len) { struct property **prevp; @@ -77,7 +80,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *old_val = prop->value; int ret; + mutex_lock(&of_set_property_mutex); ret = prom_setprop(dp->node, (char *) name, val, len); + mutex_unlock(&of_set_property_mutex); + err = -EINVAL; if (ret >= 0) { prop->value = new_val; @@ -436,7 +442,6 @@ static void __init of_console_init(void) switch (prom_vers) { case PROM_V0: - case PROM_SUN4: skip = 0; switch (*romvec->pv_stdout) { case PROMDEV_SCREEN: diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c index 20699c70141..8ce6285a06d 100644 --- a/arch/sparc/kernel/ptrace.c +++ b/arch/sparc/kernel/ptrace.c @@ -288,7 +288,7 @@ static const struct user_regset sparc32_regsets[] = { */ [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, - .n = 38 * sizeof(u32), + .n = 38, .size = sizeof(u32), .align = sizeof(u32), .get = genregs32_get, .set = genregs32_set }, @@ -304,7 +304,7 @@ static const struct user_regset sparc32_regsets[] = { */ [REGSET_FP] = { .core_note_type = NT_PRFPREG, - .n = 99 * sizeof(u32), + .n = 99, .size = sizeof(u32), .align = sizeof(u32), .get = fpregs32_get, .set = fpregs32_set }, diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c index 9e451b21202..24fe3078bd4 100644 --- a/arch/sparc/kernel/setup.c +++ b/arch/sparc/kernel/setup.c @@ -213,23 +213,25 @@ void __init setup_arch(char **cmdline_p) /* Initialize PROM console and command line. */ *cmdline_p = prom_getbootargs(); strcpy(boot_command_line, *cmdline_p); + parse_early_param(); /* Set sparc_cpu_model */ sparc_cpu_model = sun_unknown; - if(!strcmp(&cputypval,"sun4 ")) { sparc_cpu_model=sun4; } - if(!strcmp(&cputypval,"sun4c")) { sparc_cpu_model=sun4c; } - if(!strcmp(&cputypval,"sun4m")) { sparc_cpu_model=sun4m; } - if(!strcmp(&cputypval,"sun4s")) { sparc_cpu_model=sun4m; } /* CP-1200 with PROM 2.30 -E */ - if(!strcmp(&cputypval,"sun4d")) { sparc_cpu_model=sun4d; } - if(!strcmp(&cputypval,"sun4e")) { sparc_cpu_model=sun4e; } - if(!strcmp(&cputypval,"sun4u")) { sparc_cpu_model=sun4u; } - -#ifdef CONFIG_SUN4 - if (sparc_cpu_model != sun4) { - prom_printf("This kernel is for Sun4 architecture only.\n"); - prom_halt(); - } -#endif + if (!strcmp(&cputypval,"sun4 ")) + sparc_cpu_model = sun4; + if (!strcmp(&cputypval,"sun4c")) + sparc_cpu_model = sun4c; + if (!strcmp(&cputypval,"sun4m")) + sparc_cpu_model = sun4m; + if (!strcmp(&cputypval,"sun4s")) + sparc_cpu_model = sun4m; /* CP-1200 with PROM 2.30 -E */ + if (!strcmp(&cputypval,"sun4d")) + sparc_cpu_model = sun4d; + if (!strcmp(&cputypval,"sun4e")) + sparc_cpu_model = sun4e; + if (!strcmp(&cputypval,"sun4u")) + sparc_cpu_model = sun4u; + printk("ARCH: "); switch(sparc_cpu_model) { case sun4: @@ -263,7 +265,7 @@ void __init setup_arch(char **cmdline_p) boot_flags_init(*cmdline_p); idprom_init(); - if (ARCH_SUN4C_SUN4) + if (ARCH_SUN4C) sun4c_probe_vac(); load_mmu(); diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c index b23cea5ca5d..b0dfff84865 100644 --- a/arch/sparc/kernel/sparc_ksyms.c +++ b/arch/sparc/kernel/sparc_ksyms.c @@ -38,17 +38,12 @@ #include <asm/idprom.h> #include <asm/head.h> #include <asm/smp.h> -#include <asm/mostek.h> #include <asm/ptrace.h> #include <asm/uaccess.h> #include <asm/checksum.h> #ifdef CONFIG_SBUS -#include <asm/sbus.h> #include <asm/dma.h> #endif -#ifdef CONFIG_PCI -#include <asm/ebus.h> -#endif #include <asm/io-unit.h> #include <asm/bug.h> @@ -127,16 +122,11 @@ EXPORT_SYMBOL(phys_cpu_present_map); EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); EXPORT_SYMBOL(rtc_lock); -EXPORT_SYMBOL(mostek_lock); -EXPORT_SYMBOL(mstk48t02_regs); #ifdef CONFIG_SUN_AUXIO EXPORT_SYMBOL(set_auxio); EXPORT_SYMBOL(get_auxio); #endif EXPORT_SYMBOL(io_remap_pfn_range); - /* P3: iounit_xxx may be needed, sun4d users */ -/* EXPORT_SYMBOL(iounit_map_dma_init); */ -/* EXPORT_SYMBOL(iounit_map_dma_page); */ #ifndef CONFIG_SMP EXPORT_SYMBOL(BTFIXUP_CALL(___xchg32)); @@ -153,24 +143,9 @@ EXPORT_SYMBOL(BTFIXUP_CALL(mmu_release_scsi_one)); EXPORT_SYMBOL(BTFIXUP_CALL(pgprot_noncached)); #ifdef CONFIG_SBUS -EXPORT_SYMBOL(sbus_root); -EXPORT_SYMBOL(dma_chain); EXPORT_SYMBOL(sbus_set_sbus64); -EXPORT_SYMBOL(sbus_alloc_consistent); -EXPORT_SYMBOL(sbus_free_consistent); -EXPORT_SYMBOL(sbus_map_single); -EXPORT_SYMBOL(sbus_unmap_single); -EXPORT_SYMBOL(sbus_map_sg); -EXPORT_SYMBOL(sbus_unmap_sg); -EXPORT_SYMBOL(sbus_dma_sync_single_for_cpu); -EXPORT_SYMBOL(sbus_dma_sync_single_for_device); -EXPORT_SYMBOL(sbus_dma_sync_sg_for_cpu); -EXPORT_SYMBOL(sbus_dma_sync_sg_for_device); -EXPORT_SYMBOL(sbus_iounmap); -EXPORT_SYMBOL(sbus_ioremap); #endif #ifdef CONFIG_PCI -EXPORT_SYMBOL(ebus_chain); EXPORT_SYMBOL(insb); EXPORT_SYMBOL(outsb); EXPORT_SYMBOL(insw); diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c index 340fc395fe2..5dc8a576948 100644 --- a/arch/sparc/kernel/sun4c_irq.c +++ b/arch/sparc/kernel/sun4c_irq.c @@ -18,6 +18,8 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/init.h> +#include <linux/of.h> +#include <linux/of_device.h> #include "irq.h" #include <asm/ptrace.h> @@ -31,15 +33,8 @@ #include <asm/traps.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/sun4paddr.h> #include <asm/idprom.h> #include <asm/machines.h> -#include <asm/sbus.h> - -#if 0 -static struct resource sun4c_timer_eb = { "sun4c_timer" }; -static struct resource sun4c_intr_eb = { "sun4c_intr" }; -#endif /* * Bit field defines for the interrupt registers on various @@ -64,19 +59,7 @@ static struct resource sun4c_intr_eb = { "sun4c_intr" }; * * so don't go making it static, like I tried. sigh. */ -unsigned char *interrupt_enable = NULL; - -static int sun4c_pil_map[] = { 0, 1, 2, 3, 5, 7, 8, 9 }; - -static unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev, - unsigned int sbint) -{ - if (sbint >= sizeof(sun4c_pil_map)) { - printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint); - BUG(); - } - return sun4c_pil_map[sbint]; -} +unsigned char __iomem *interrupt_enable = NULL; static void sun4c_disable_irq(unsigned int irq_nr) { @@ -85,7 +68,7 @@ static void sun4c_disable_irq(unsigned int irq_nr) local_irq_save(flags); irq_nr &= (NR_IRQS - 1); - current_mask = *interrupt_enable; + current_mask = sbus_readb(interrupt_enable); switch(irq_nr) { case 1: new_mask = ((current_mask) & (~(SUN4C_INT_E1))); @@ -103,7 +86,7 @@ static void sun4c_disable_irq(unsigned int irq_nr) local_irq_restore(flags); return; } - *interrupt_enable = new_mask; + sbus_writeb(new_mask, interrupt_enable); local_irq_restore(flags); } @@ -114,7 +97,7 @@ static void sun4c_enable_irq(unsigned int irq_nr) local_irq_save(flags); irq_nr &= (NR_IRQS - 1); - current_mask = *interrupt_enable; + current_mask = sbus_readb(interrupt_enable); switch(irq_nr) { case 1: new_mask = ((current_mask) | SUN4C_INT_E1); @@ -132,37 +115,22 @@ static void sun4c_enable_irq(unsigned int irq_nr) local_irq_restore(flags); return; } - *interrupt_enable = new_mask; + sbus_writeb(new_mask, interrupt_enable); local_irq_restore(flags); } -#define TIMER_IRQ 10 /* Also at level 14, but we ignore that one. */ -#define PROFILE_IRQ 14 /* Level14 ticker.. used by OBP for polling */ - -volatile struct sun4c_timer_info *sun4c_timers; +struct sun4c_timer_info { + u32 l10_count; + u32 l10_limit; + u32 l14_count; + u32 l14_limit; +}; -#ifdef CONFIG_SUN4 -/* This is an ugly hack to work around the - current timer code, and make it work with - the sun4/260 intersil - */ -volatile struct sun4c_timer_info sun4_timer; -#endif +static struct sun4c_timer_info __iomem *sun4c_timers; static void sun4c_clear_clock_irq(void) { - volatile unsigned int clear_intr; -#ifdef CONFIG_SUN4 - if (idprom->id_machtype == (SM_SUN4 | SM_4_260)) - clear_intr = sun4_timer.timer_limit10; - else -#endif - clear_intr = sun4c_timers->timer_limit10; -} - -static void sun4c_clear_profile_irq(int cpu) -{ - /* Errm.. not sure how to do this.. */ + sbus_readl(&sun4c_timers->l10_limit); } static void sun4c_load_profile_irq(int cpu, unsigned int limit) @@ -172,41 +140,48 @@ static void sun4c_load_profile_irq(int cpu, unsigned int limit) static void __init sun4c_init_timers(irq_handler_t counter_fn) { - int irq; + const struct linux_prom_irqs *irq; + struct device_node *dp; + const u32 *addr; + int err; + + dp = of_find_node_by_name(NULL, "counter-timer"); + if (!dp) { + prom_printf("sun4c_init_timers: Unable to find counter-timer\n"); + prom_halt(); + } - /* Map the Timer chip, this is implemented in hardware inside - * the cache chip on the sun4c. - */ -#ifdef CONFIG_SUN4 - if (idprom->id_machtype == (SM_SUN4 | SM_4_260)) - sun4c_timers = &sun4_timer; - else -#endif - sun4c_timers = ioremap(SUN_TIMER_PHYSADDR, - sizeof(struct sun4c_timer_info)); + addr = of_get_property(dp, "address", NULL); + if (!addr) { + prom_printf("sun4c_init_timers: No address property\n"); + prom_halt(); + } + + sun4c_timers = (void __iomem *) (unsigned long) addr[0]; + + irq = of_get_property(dp, "intr", NULL); + if (!irq) { + prom_printf("sun4c_init_timers: No intr property\n"); + prom_halt(); + } /* Have the level 10 timer tick at 100HZ. We don't touch the * level 14 timer limit since we are letting the prom handle * them until we have a real console driver so L1-A works. */ - sun4c_timers->timer_limit10 = (((1000000/HZ) + 1) << 10); - master_l10_counter = &sun4c_timers->cur_count10; - master_l10_limit = &sun4c_timers->timer_limit10; + sbus_writel((((1000000/HZ) + 1) << 10), &sun4c_timers->l10_limit); - irq = request_irq(TIMER_IRQ, - counter_fn, + master_l10_counter = &sun4c_timers->l10_count; + + err = request_irq(irq[0].pri, counter_fn, (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL); - if (irq) { - prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ); + if (err) { + prom_printf("sun4c_init_timers: request_irq() fails with %d\n", err); prom_halt(); } -#if 0 - /* This does not work on 4/330 */ - sun4c_enable_irq(10); -#endif - claim_ticker14(NULL, PROFILE_IRQ, 0); + sun4c_disable_irq(irq[1].pri); } #ifdef CONFIG_SMP @@ -215,41 +190,28 @@ static void sun4c_nop(void) {} void __init sun4c_init_IRQ(void) { - struct linux_prom_registers int_regs[2]; - int ie_node; + struct device_node *dp; + const u32 *addr; - if (ARCH_SUN4) { - interrupt_enable = (char *) - ioremap(sun4_ie_physaddr, PAGE_SIZE); - } else { - struct resource phyres; - - ie_node = prom_searchsiblings (prom_getchild(prom_root_node), - "interrupt-enable"); - if(ie_node == 0) - panic("Cannot find /interrupt-enable node"); + dp = of_find_node_by_name(NULL, "interrupt-enable"); + if (!dp) { + prom_printf("sun4c_init_IRQ: Unable to find interrupt-enable\n"); + prom_halt(); + } - /* Depending on the "address" property is bad news... */ - interrupt_enable = NULL; - if (prom_getproperty(ie_node, "reg", (char *) int_regs, - sizeof(int_regs)) != -1) { - memset(&phyres, 0, sizeof(struct resource)); - phyres.flags = int_regs[0].which_io; - phyres.start = int_regs[0].phys_addr; - interrupt_enable = (char *) sbus_ioremap(&phyres, 0, - int_regs[0].reg_size, "sun4c_intr"); - } + addr = of_get_property(dp, "address", NULL); + if (!addr) { + prom_printf("sun4c_init_IRQ: No address property\n"); + prom_halt(); } - if (!interrupt_enable) - panic("Cannot map interrupt_enable"); - BTFIXUPSET_CALL(sbint_to_irq, sun4c_sbint_to_irq, BTFIXUPCALL_NORM); + interrupt_enable = (void __iomem *) (unsigned long) addr[0]; + BTFIXUPSET_CALL(enable_irq, sun4c_enable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_irq, sun4c_disable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(enable_pil_irq, sun4c_enable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_pil_irq, sun4c_disable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, sun4c_clear_clock_irq, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(clear_profile_irq, sun4c_clear_profile_irq, BTFIXUPCALL_NOP); BTFIXUPSET_CALL(load_profile_irq, sun4c_load_profile_irq, BTFIXUPCALL_NOP); sparc_init_timers = sun4c_init_timers; #ifdef CONFIG_SMP @@ -257,6 +219,6 @@ void __init sun4c_init_IRQ(void) BTFIXUPSET_CALL(clear_cpu_int, sun4c_nop, BTFIXUPCALL_NOP); BTFIXUPSET_CALL(set_irq_udt, sun4c_nop, BTFIXUPCALL_NOP); #endif - *interrupt_enable = (SUN4C_INT_ENABLE); + sbus_writeb(SUN4C_INT_ENABLE, interrupt_enable); /* Cannot enable interrupts until OBP ticker is disabled. */ } diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c index 1290b5998f8..d3cb76ce418 100644 --- a/arch/sparc/kernel/sun4d_irq.c +++ b/arch/sparc/kernel/sun4d_irq.c @@ -19,6 +19,8 @@ #include <linux/smp.h> #include <linux/spinlock.h> #include <linux/seq_file.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/ptrace.h> #include <asm/processor.h> @@ -34,7 +36,6 @@ #include <asm/io.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> -#include <asm/sbus.h> #include <asm/sbi.h> #include <asm/cacheflush.h> #include <asm/irq_regs.h> @@ -44,16 +45,22 @@ /* If you trust current SCSI layer to handle different SCSI IRQs, enable this. I don't trust it... -jj */ /* #define DISTRIBUTE_IRQS */ -struct sun4d_timer_regs *sun4d_timers; +struct sun4d_timer_regs { + u32 l10_timer_limit; + u32 l10_cur_countx; + u32 l10_limit_noclear; + u32 ctrl; + u32 l10_cur_count; +}; + +static struct sun4d_timer_regs __iomem *sun4d_timers; + #define TIMER_IRQ 10 #define MAX_STATIC_ALLOC 4 extern struct irqaction static_irqaction[MAX_STATIC_ALLOC]; extern int static_irq_count; -unsigned char cpu_leds[32]; -#ifdef CONFIG_SMP static unsigned char sbus_tid[32]; -#endif static struct irqaction *irq_action[NR_IRQS]; extern spinlock_t irq_action_lock; @@ -72,9 +79,9 @@ static int sbus_to_pil[] = { }; static int nsbi; -#ifdef CONFIG_SMP + +/* Exported for sun4d_smp.c */ DEFINE_SPINLOCK(sun4d_imsk_lock); -#endif int show_sun4d_interrupts(struct seq_file *p, void *v) { @@ -257,26 +264,6 @@ void sun4d_handler_irq(int irq, struct pt_regs * regs) set_irq_regs(old_regs); } -unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq) -{ - int sbusl = pil_to_sbus[irq]; - - if (sbusl) - return ((sdev->bus->board + 1) << 5) + (sbusl << 2) + sdev->slot; - else - return irq; -} - -static unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev, - unsigned int sbint) -{ - if (sbint >= sizeof(sbus_to_pil)) { - printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint); - BUG(); - } - return sun4d_build_irq(sdev, sbus_to_pil[sbint]); -} - int sun4d_request_irq(unsigned int irq, irq_handler_t handler, unsigned long irqflags, const char * devname, void *dev_id) @@ -360,36 +347,28 @@ out: static void sun4d_disable_irq(unsigned int irq) { -#ifdef CONFIG_SMP int tid = sbus_tid[(irq >> 5) - 1]; unsigned long flags; -#endif - if (irq < NR_IRQS) return; -#ifdef CONFIG_SMP + if (irq < NR_IRQS) + return; + spin_lock_irqsave(&sun4d_imsk_lock, flags); cc_set_imsk_other(tid, cc_get_imsk_other(tid) | (1 << sbus_to_pil[(irq >> 2) & 7])); spin_unlock_irqrestore(&sun4d_imsk_lock, flags); -#else - cc_set_imsk(cc_get_imsk() | (1 << sbus_to_pil[(irq >> 2) & 7])); -#endif } static void sun4d_enable_irq(unsigned int irq) { -#ifdef CONFIG_SMP int tid = sbus_tid[(irq >> 5) - 1]; unsigned long flags; -#endif - if (irq < NR_IRQS) return; -#ifdef CONFIG_SMP + if (irq < NR_IRQS) + return; + spin_lock_irqsave(&sun4d_imsk_lock, flags); cc_set_imsk_other(tid, cc_get_imsk_other(tid) & ~(1 << sbus_to_pil[(irq >> 2) & 7])); spin_unlock_irqrestore(&sun4d_imsk_lock, flags); -#else - cc_set_imsk(cc_get_imsk() & ~(1 << sbus_to_pil[(irq >> 2) & 7])); -#endif } #ifdef CONFIG_SMP @@ -409,47 +388,55 @@ static void sun4d_set_udt(int cpu) /* Setup IRQ distribution scheme. */ void __init sun4d_distribute_irqs(void) { + struct device_node *dp; + #ifdef DISTRIBUTE_IRQS - struct sbus_bus *sbus; - unsigned long sbus_serving_map; + cpumask_t sbus_serving_map; sbus_serving_map = cpu_present_map; - for_each_sbus(sbus) { - if ((sbus->board * 2) == boot_cpu_id && (cpu_present_map & (1 << (sbus->board * 2 + 1)))) - sbus_tid[sbus->board] = (sbus->board * 2 + 1); - else if (cpu_present_map & (1 << (sbus->board * 2))) - sbus_tid[sbus->board] = (sbus->board * 2); - else if (cpu_present_map & (1 << (sbus->board * 2 + 1))) - sbus_tid[sbus->board] = (sbus->board * 2 + 1); + for_each_node_by_name(dp, "sbi") { + int board = of_getintprop_default(dp, "board#", 0); + + if ((board * 2) == boot_cpu_id && cpu_isset(board * 2 + 1, cpu_present_map)) + sbus_tid[board] = (board * 2 + 1); + else if (cpu_isset(board * 2, cpu_present_map)) + sbus_tid[board] = (board * 2); + else if (cpu_isset(board * 2 + 1, cpu_present_map)) + sbus_tid[board] = (board * 2 + 1); else - sbus_tid[sbus->board] = 0xff; - if (sbus_tid[sbus->board] != 0xff) - sbus_serving_map &= ~(1 << sbus_tid[sbus->board]); + sbus_tid[board] = 0xff; + if (sbus_tid[board] != 0xff) + cpu_clear(sbus_tid[board], sbus_serving_map); } - for_each_sbus(sbus) - if (sbus_tid[sbus->board] == 0xff) { + for_each_node_by_name(dp, "sbi") { + int board = of_getintprop_default(dp, "board#", 0); + if (sbus_tid[board] == 0xff) { int i = 31; - if (!sbus_serving_map) + if (cpus_empty(sbus_serving_map)) sbus_serving_map = cpu_present_map; - while (!(sbus_serving_map & (1 << i))) + while (cpu_isset(i, sbus_serving_map)) i--; - sbus_tid[sbus->board] = i; - sbus_serving_map &= ~(1 << i); + sbus_tid[board] = i; + cpu_clear(i, sbus_serving_map); } - for_each_sbus(sbus) { - printk("sbus%d IRQs directed to CPU%d\n", sbus->board, sbus_tid[sbus->board]); - set_sbi_tid(sbus->devid, sbus_tid[sbus->board] << 3); + } + for_each_node_by_name(dp, "sbi") { + int devid = of_getintprop_default(dp, "device-id", 0); + int board = of_getintprop_default(dp, "board#", 0); + printk("sbus%d IRQs directed to CPU%d\n", board, sbus_tid[board]); + set_sbi_tid(devid, sbus_tid[board] << 3); } #else - struct sbus_bus *sbus; int cpuid = cpu_logical_map(1); if (cpuid == -1) cpuid = cpu_logical_map(0); - for_each_sbus(sbus) { - sbus_tid[sbus->board] = cpuid; - set_sbi_tid(sbus->devid, cpuid << 3); + for_each_node_by_name(dp, "sbi") { + int devid = of_getintprop_default(dp, "device-id", 0); + int board = of_getintprop_default(dp, "board#", 0); + sbus_tid[board] = cpuid; + set_sbi_tid(devid, cpuid << 3); } printk("All sbus IRQs directed to CPU%d\n", cpuid); #endif @@ -458,13 +445,7 @@ void __init sun4d_distribute_irqs(void) static void sun4d_clear_clock_irq(void) { - volatile unsigned int clear_intr; - clear_intr = sun4d_timers->l10_timer_limit; -} - -static void sun4d_clear_profile_irq(int cpu) -{ - bw_get_prof_limit(cpu); + sbus_readl(&sun4d_timers->l10_timer_limit); } static void sun4d_load_profile_irq(int cpu, unsigned int limit) @@ -472,98 +453,121 @@ static void sun4d_load_profile_irq(int cpu, unsigned int limit) bw_set_prof_limit(cpu, limit); } -static void __init sun4d_init_timers(irq_handler_t counter_fn) +static void __init sun4d_load_profile_irqs(void) { - int irq; - int cpu; - struct resource r; - int mid; + int cpu = 0, mid; - /* Map the User Timer registers. */ - memset(&r, 0, sizeof(r)); + while (!cpu_find_by_instance(cpu, NULL, &mid)) { + sun4d_load_profile_irq(mid >> 3, 0); + cpu++; + } +} + +static void __init sun4d_fixup_trap_table(void) +{ #ifdef CONFIG_SMP - r.start = CSR_BASE(boot_cpu_id)+BW_TIMER_LIMIT; -#else - r.start = CSR_BASE(0)+BW_TIMER_LIMIT; + unsigned long flags; + extern unsigned long lvl14_save[4]; + struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)]; + extern unsigned int real_irq_entry[], smp4d_ticker[]; + extern unsigned int patchme_maybe_smp_msg[]; + + /* Adjust so that we jump directly to smp4d_ticker */ + lvl14_save[2] += smp4d_ticker - real_irq_entry; + + /* For SMP we use the level 14 ticker, however the bootup code + * has copied the firmware's level 14 vector into the boot cpu's + * trap table, we must fix this now or we get squashed. + */ + local_irq_save(flags); + patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */ + trap_table->inst_one = lvl14_save[0]; + trap_table->inst_two = lvl14_save[1]; + trap_table->inst_three = lvl14_save[2]; + trap_table->inst_four = lvl14_save[3]; + local_flush_cache_all(); + local_irq_restore(flags); #endif - r.flags = 0xf; - sun4d_timers = (struct sun4d_timer_regs *) sbus_ioremap(&r, 0, - PAGE_SIZE, "user timer"); +} - sun4d_timers->l10_timer_limit = (((1000000/HZ) + 1) << 10); - master_l10_counter = &sun4d_timers->l10_cur_count; - master_l10_limit = &sun4d_timers->l10_timer_limit; +static void __init sun4d_init_timers(irq_handler_t counter_fn) +{ + struct device_node *dp; + struct resource res; + const u32 *reg; + int err; + + dp = of_find_node_by_name(NULL, "cpu-unit"); + if (!dp) { + prom_printf("sun4d_init_timers: Unable to find cpu-unit\n"); + prom_halt(); + } - irq = request_irq(TIMER_IRQ, - counter_fn, - (IRQF_DISABLED | SA_STATIC_ALLOC), - "timer", NULL); - if (irq) { - prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ); + /* Which cpu-unit we use is arbitrary, we can view the bootbus timer + * registers via any cpu's mapping. The first 'reg' property is the + * bootbus. + */ + reg = of_get_property(dp, "reg", NULL); + if (!reg) { + prom_printf("sun4d_init_timers: No reg property\n"); prom_halt(); } - - /* Enable user timer free run for CPU 0 in BW */ - /* bw_set_ctrl(0, bw_get_ctrl(0) | BW_CTRL_USER_TIMER); */ - cpu = 0; - while (!cpu_find_by_instance(cpu, NULL, &mid)) { - sun4d_load_profile_irq(mid >> 3, 0); - cpu++; + res.start = reg[1]; + res.end = reg[2] - 1; + res.flags = reg[0] & 0xff; + sun4d_timers = of_ioremap(&res, BW_TIMER_LIMIT, + sizeof(struct sun4d_timer_regs), "user timer"); + if (!sun4d_timers) { + prom_printf("sun4d_init_timers: Can't map timer regs\n"); + prom_halt(); } - -#ifdef CONFIG_SMP - { - unsigned long flags; - extern unsigned long lvl14_save[4]; - struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)]; - extern unsigned int real_irq_entry[], smp4d_ticker[]; - extern unsigned int patchme_maybe_smp_msg[]; - - /* Adjust so that we jump directly to smp4d_ticker */ - lvl14_save[2] += smp4d_ticker - real_irq_entry; - - /* For SMP we use the level 14 ticker, however the bootup code - * has copied the firmware's level 14 vector into the boot cpu's - * trap table, we must fix this now or we get squashed. - */ - local_irq_save(flags); - patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */ - trap_table->inst_one = lvl14_save[0]; - trap_table->inst_two = lvl14_save[1]; - trap_table->inst_three = lvl14_save[2]; - trap_table->inst_four = lvl14_save[3]; - local_flush_cache_all(); - local_irq_restore(flags); + + sbus_writel((((1000000/HZ) + 1) << 10), &sun4d_timers->l10_timer_limit); + + master_l10_counter = &sun4d_timers->l10_cur_count; + + err = request_irq(TIMER_IRQ, counter_fn, + (IRQF_DISABLED | SA_STATIC_ALLOC), + "timer", NULL); + if (err) { + prom_printf("sun4d_init_timers: request_irq() failed with %d\n", err); + prom_halt(); } -#endif + sun4d_load_profile_irqs(); + sun4d_fixup_trap_table(); } void __init sun4d_init_sbi_irq(void) { - struct sbus_bus *sbus; - unsigned mask; + struct device_node *dp; + int target_cpu = 0; + +#ifdef CONFIG_SMP + target_cpu = boot_cpu_id; +#endif nsbi = 0; - for_each_sbus(sbus) + for_each_node_by_name(dp, "sbi") nsbi++; sbus_actions = kzalloc (nsbi * 8 * 4 * sizeof(struct sbus_action), GFP_ATOMIC); if (!sbus_actions) { prom_printf("SUN4D: Cannot allocate sbus_actions, halting.\n"); prom_halt(); } - for_each_sbus(sbus) { -#ifdef CONFIG_SMP - extern unsigned char boot_cpu_id; - - set_sbi_tid(sbus->devid, boot_cpu_id << 3); - sbus_tid[sbus->board] = boot_cpu_id; -#endif + for_each_node_by_name(dp, "sbi") { + int devid = of_getintprop_default(dp, "device-id", 0); + int board = of_getintprop_default(dp, "board#", 0); + unsigned int mask; + + set_sbi_tid(devid, target_cpu << 3); + sbus_tid[board] = target_cpu; + /* Get rid of pending irqs from PROM */ - mask = acquire_sbi(sbus->devid, 0xffffffff); + mask = acquire_sbi(devid, 0xffffffff); if (mask) { - printk ("Clearing pending IRQs %08x on SBI %d\n", mask, sbus->board); - release_sbi(sbus->devid, mask); + printk ("Clearing pending IRQs %08x on SBI %d\n", mask, board); + release_sbi(devid, mask); } } } @@ -572,11 +576,9 @@ void __init sun4d_init_IRQ(void) { local_irq_disable(); - BTFIXUPSET_CALL(sbint_to_irq, sun4d_sbint_to_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(enable_irq, sun4d_enable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_irq, sun4d_disable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, sun4d_clear_clock_irq, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(clear_profile_irq, sun4d_clear_profile_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(load_profile_irq, sun4d_load_profile_irq, BTFIXUPCALL_NORM); sparc_init_timers = sun4d_init_timers; #ifdef CONFIG_SMP diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index 69596402a50..ce3d45db94e 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -30,7 +30,6 @@ #include <asm/pgalloc.h> #include <asm/pgtable.h> #include <asm/oplib.h> -#include <asm/sbus.h> #include <asm/sbi.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> @@ -72,6 +71,17 @@ static void smp_setup_percpu_timer(void); extern void cpu_probe(void); extern void sun4d_distribute_irqs(void); +static unsigned char cpu_leds[32]; + +static inline void show_leds(int cpuid) +{ + cpuid &= 0x1e; + __asm__ __volatile__ ("stba %0, [%1] %2" : : + "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]), + "r" (ECSR_BASE(cpuid) | BB_LEDS), + "i" (ASI_M_CTL)); +} + void __init smp4d_callin(void) { int cpuid = hard_smp4d_processor_id(); @@ -88,6 +98,7 @@ void __init smp4d_callin(void) local_flush_cache_all(); local_flush_tlb_all(); + notify_cpu_starting(cpuid); /* * Unblock the master CPU _only_ when the scheduler state * of all secondary CPUs will be up-to-date, so after diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c index 94e02de960e..f10317179ee 100644 --- a/arch/sparc/kernel/sun4m_irq.c +++ b/arch/sparc/kernel/sun4m_irq.c @@ -20,6 +20,8 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/ioport.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/ptrace.h> #include <asm/processor.h> @@ -35,59 +37,27 @@ #include <asm/smp.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/sbus.h> #include <asm/cacheflush.h> #include "irq.h" -/* On the sun4m, just like the timers, we have both per-cpu and master - * interrupt registers. - */ - -/* These registers are used for sending/receiving irqs from/to - * different cpu's. - */ -struct sun4m_intreg_percpu { - unsigned int tbt; /* Interrupts still pending for this cpu. */ - - /* These next two registers are WRITE-ONLY and are only - * "on bit" sensitive, "off bits" written have NO affect. - */ - unsigned int clear; /* Clear this cpus irqs here. */ - unsigned int set; /* Set this cpus irqs here. */ - unsigned char space[PAGE_SIZE - 12]; +struct sun4m_irq_percpu { + u32 pending; + u32 clear; + u32 set; }; -/* - * djhr - * Actually the clear and set fields in this struct are misleading.. - * according to the SLAVIO manual (and the same applies for the SEC) - * the clear field clears bits in the mask which will ENABLE that IRQ - * the set field sets bits in the mask to DISABLE the IRQ. - * - * Also the undirected_xx address in the SLAVIO is defined as - * RESERVED and write only.. - * - * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor - * sun4m machines, for MP the layout makes more sense. - */ -struct sun4m_intregs { - struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS]; - unsigned int tbt; /* IRQ's that are still pending. */ - unsigned int irqs; /* Master IRQ bits. */ - - /* Again, like the above, two these registers are WRITE-ONLY. */ - unsigned int clear; /* Clear master IRQ's by setting bits here. */ - unsigned int set; /* Set master IRQ's by setting bits here. */ - - /* This register is both READ and WRITE. */ - unsigned int undirected_target; /* Which cpu gets undirected irqs. */ +struct sun4m_irq_global { + u32 pending; + u32 mask; + u32 mask_clear; + u32 mask_set; + u32 interrupt_target; }; -static unsigned long dummy; - -struct sun4m_intregs *sun4m_interrupts; -unsigned long *irq_rcvreg = &dummy; +/* Code in entry.S needs to get at these register mappings. */ +struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS]; +struct sun4m_irq_global __iomem *sun4m_irq_global; /* Dave Redman (djhr@tadpole.co.uk) * The sun4m interrupt registers. @@ -101,8 +71,9 @@ unsigned long *irq_rcvreg = &dummy; #define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */ #define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */ -#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */ -#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */ +#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */ +#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */ +#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */ #define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */ #define SUN4M_INT_MODULE 0x00200000 /* module interrupt */ #define SUN4M_INT_VIDEO 0x00100000 /* onboard video */ @@ -113,75 +84,126 @@ unsigned long *irq_rcvreg = &dummy; #define SUN4M_INT_SERIAL 0x00008000 /* serial ports */ #define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */ #define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */ +#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */ + +#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \ + SUN4M_INT_M2S_WRITE_ERR | \ + SUN4M_INT_ECC_ERR | \ + SUN4M_INT_VME_ERR) #define SUN4M_INT_SBUS(x) (1 << (x+7)) #define SUN4M_INT_VME(x) (1 << (x)) -/* These tables only apply for interrupts greater than 15.. - * - * any intr value below 0x10 is considered to be a soft-int - * this may be useful or it may not.. but that's how I've done it. - * and it won't clash with what OBP is telling us about devices. +/* Interrupt levels used by OBP */ +#define OBP_INT_LEVEL_SOFT 0x10 +#define OBP_INT_LEVEL_ONBOARD 0x20 +#define OBP_INT_LEVEL_SBUS 0x30 +#define OBP_INT_LEVEL_VME 0x40 + +/* Interrupt level assignment on sun4m: + * + * level source + * ------------------------------------------------------------ + * 1 softint-1 + * 2 softint-2, VME/SBUS level 1 + * 3 softint-3, VME/SBUS level 2 + * 4 softint-4, onboard SCSI + * 5 softint-5, VME/SBUS level 3 + * 6 softint-6, onboard ETHERNET + * 7 softint-7, VME/SBUS level 4 + * 8 softint-8, onboard VIDEO + * 9 softint-9, VME/SBUS level 5, Module Interrupt + * 10 softint-10, system counter/timer + * 11 softint-11, VME/SBUS level 6, Floppy + * 12 softint-12, Keyboard/Mouse, Serial + * 13 softint-13, VME/SBUS level 7, ISDN Audio + * 14 softint-14, per-processor counter/timer + * 15 softint-15, Asynchronous Errors (broadcast) * - * take an encoded intr value and lookup if it's valid - * then get the mask bits that match from irq_mask + * Each interrupt source is masked distinctly in the sun4m interrupt + * registers. The PIL level alone is therefore ambiguous, since multiple + * interrupt sources map to a single PIL. * - * P3: Translation from irq 0x0d to mask 0x2000 is for MrCoffee. + * This ambiguity is resolved in the 'intr' property for device nodes + * in the OF device tree. Each 'intr' property entry is composed of + * two 32-bit words. The first word is the IRQ priority value, which + * is what we're intersted in. The second word is the IRQ vector, which + * is unused. + * + * The low 4 bits of the IRQ priority indicate the PIL, and the upper + * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20 + * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled. + * + * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI + * whereas a value of 0x33 is SBUS level 2. Here are some sample + * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and + * Tadpole S3 GX systems. + * + * esp: 0x24 onboard ESP SCSI + * le: 0x26 onboard Lance ETHERNET + * p9100: 0x32 SBUS level 1 P9100 video + * bpp: 0x33 SBUS level 2 BPP parallel port device + * DBRI: 0x39 SBUS level 5 DBRI ISDN audio + * SUNW,leo: 0x39 SBUS level 5 LEO video + * pcmcia: 0x3b SBUS level 6 PCMCIA controller + * uctrl: 0x3b SBUS level 6 UCTRL device + * modem: 0x3d SBUS level 7 MODEM + * zs: 0x2c onboard keyboard/mouse/serial + * floppy: 0x2b onboard Floppy + * power: 0x22 onboard power device (XXX unknown mask bit XXX) */ -static unsigned char irq_xlate[32] = { - /* 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c, d, e, f */ - 0, 0, 0, 0, 1, 0, 2, 0, 3, 0, 4, 5, 6, 14, 0, 7, - 0, 0, 8, 9, 0, 10, 0, 11, 0, 12, 0, 13, 0, 14, 0, 0 -}; -static unsigned long irq_mask[] = { - 0, /* illegal index */ - SUN4M_INT_SCSI, /* 1 irq 4 */ - SUN4M_INT_ETHERNET, /* 2 irq 6 */ - SUN4M_INT_VIDEO, /* 3 irq 8 */ - SUN4M_INT_REALTIME, /* 4 irq 10 */ - SUN4M_INT_FLOPPY, /* 5 irq 11 */ - (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), /* 6 irq 12 */ - SUN4M_INT_MODULE_ERR, /* 7 irq 15 */ - SUN4M_INT_SBUS(0), /* 8 irq 2 */ - SUN4M_INT_SBUS(1), /* 9 irq 3 */ - SUN4M_INT_SBUS(2), /* 10 irq 5 */ - SUN4M_INT_SBUS(3), /* 11 irq 7 */ - SUN4M_INT_SBUS(4), /* 12 irq 9 */ - SUN4M_INT_SBUS(5), /* 13 irq 11 */ - SUN4M_INT_SBUS(6) /* 14 irq 13 */ +static unsigned long irq_mask[0x50] = { + /* SMP */ + 0, SUN4M_SOFT_INT(1), + SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3), + SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5), + SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7), + SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9), + SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11), + SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13), + SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15), + /* soft */ + 0, SUN4M_SOFT_INT(1), + SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3), + SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5), + SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7), + SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9), + SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11), + SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13), + SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15), + /* onboard */ + 0, 0, 0, 0, + SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0, + SUN4M_INT_VIDEO, SUN4M_INT_MODULE, + SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY, + (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), + SUN4M_INT_AUDIO, 0, SUN4M_INT_MODULE_ERR, + /* sbus */ + 0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1), + 0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3), + 0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5), + 0, SUN4M_INT_SBUS(6), 0, 0, + /* vme */ + 0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1), + 0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3), + 0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5), + 0, SUN4M_INT_VME(6), 0, 0 }; -static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 }; - -static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, - unsigned int sbint) -{ - if (sbint >= sizeof(sun4m_pil_map)) { - printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint); - BUG(); - } - return sun4m_pil_map[sbint] | 0x30; -} - static unsigned long sun4m_get_irqmask(unsigned int irq) { unsigned long mask; - if (irq > 0x20) { - /* OBIO/SBUS interrupts */ - irq &= 0x1f; - mask = irq_mask[irq_xlate[irq]]; - if (!mask) - printk("sun4m_get_irqmask: IRQ%d has no valid mask!\n",irq); - } else { - /* Soft Interrupts will come here. - * Currently there is no way to trigger them but I'm sure - * something could be cooked up. - */ - irq &= 0xf; - mask = SUN4M_SOFT_INT(irq); - } + if (irq < 0x50) + mask = irq_mask[irq]; + else + mask = 0; + + if (!mask) + printk(KERN_ERR "sun4m_get_irqmask: IRQ%d has no valid mask!\n", + irq); + return mask; } @@ -193,9 +215,9 @@ static void sun4m_disable_irq(unsigned int irq_nr) mask = sun4m_get_irqmask(irq_nr); local_irq_save(flags); if (irq_nr > 15) - sun4m_interrupts->set = mask; + sbus_writel(mask, &sun4m_irq_global->mask_set); else - sun4m_interrupts->cpu_intregs[cpu].set = mask; + sbus_writel(mask, &sun4m_irq_percpu[cpu]->set); local_irq_restore(flags); } @@ -212,13 +234,13 @@ static void sun4m_enable_irq(unsigned int irq_nr) mask = sun4m_get_irqmask(irq_nr); local_irq_save(flags); if (irq_nr > 15) - sun4m_interrupts->clear = mask; + sbus_writel(mask, &sun4m_irq_global->mask_clear); else - sun4m_interrupts->cpu_intregs[cpu].clear = mask; + sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear); local_irq_restore(flags); } else { local_irq_save(flags); - sun4m_interrupts->clear = SUN4M_INT_FLOPPY; + sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear); local_irq_restore(flags); } } @@ -236,10 +258,10 @@ static unsigned long cpu_pil_to_imask[16] = { /*9*/ SUN4M_INT_SBUS(4) | SUN4M_INT_VME(4) | SUN4M_INT_MODULE_ERR, /*10*/ SUN4M_INT_REALTIME, /*11*/ SUN4M_INT_SBUS(5) | SUN4M_INT_VME(5) | SUN4M_INT_FLOPPY, -/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS, -/*13*/ SUN4M_INT_AUDIO, +/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS, +/*13*/ SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO, /*14*/ SUN4M_INT_E14, -/*15*/ 0x00000000 +/*15*/ SUN4M_INT_ERROR }; /* We assume the caller has disabled local interrupts when these are called, @@ -247,126 +269,141 @@ static unsigned long cpu_pil_to_imask[16] = { */ static void sun4m_disable_pil_irq(unsigned int pil) { - sun4m_interrupts->set = cpu_pil_to_imask[pil]; + sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_set); } static void sun4m_enable_pil_irq(unsigned int pil) { - sun4m_interrupts->clear = cpu_pil_to_imask[pil]; + sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_clear); } #ifdef CONFIG_SMP static void sun4m_send_ipi(int cpu, int level) { - unsigned long mask; - - mask = sun4m_get_irqmask(level); - sun4m_interrupts->cpu_intregs[cpu].set = mask; + unsigned long mask = sun4m_get_irqmask(level); + sbus_writel(mask, &sun4m_irq_percpu[cpu]->set); } static void sun4m_clear_ipi(int cpu, int level) { - unsigned long mask; - - mask = sun4m_get_irqmask(level); - sun4m_interrupts->cpu_intregs[cpu].clear = mask; + unsigned long mask = sun4m_get_irqmask(level); + sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear); } static void sun4m_set_udt(int cpu) { - sun4m_interrupts->undirected_target = cpu; + sbus_writel(cpu, &sun4m_irq_global->interrupt_target); } #endif -#define OBIO_INTR 0x20 -#define TIMER_IRQ (OBIO_INTR | 10) -#define PROFILE_IRQ (OBIO_INTR | 14) +struct sun4m_timer_percpu { + u32 l14_limit; + u32 l14_count; + u32 l14_limit_noclear; + u32 user_timer_start_stop; +}; + +static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS]; + +struct sun4m_timer_global { + u32 l10_limit; + u32 l10_count; + u32 l10_limit_noclear; + u32 reserved; + u32 timer_config; +}; + +static struct sun4m_timer_global __iomem *timers_global; + +#define TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10) -static struct sun4m_timer_regs *sun4m_timers; unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10); static void sun4m_clear_clock_irq(void) { - volatile unsigned int clear_intr; - clear_intr = sun4m_timers->l10_timer_limit; + sbus_readl(&timers_global->l10_limit); } -static void sun4m_clear_profile_irq(int cpu) +void sun4m_nmi(struct pt_regs *regs) { - volatile unsigned int clear; - - clear = sun4m_timers->cpu_timers[cpu].l14_timer_limit; + unsigned long afsr, afar, si; + + printk(KERN_ERR "Aieee: sun4m NMI received!\n"); + /* XXX HyperSparc hack XXX */ + __asm__ __volatile__("mov 0x500, %%g1\n\t" + "lda [%%g1] 0x4, %0\n\t" + "mov 0x600, %%g1\n\t" + "lda [%%g1] 0x4, %1\n\t" : + "=r" (afsr), "=r" (afar)); + printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar); + si = sbus_readl(&sun4m_irq_global->pending); + printk(KERN_ERR "si=%08lx\n", si); + if (si & SUN4M_INT_MODULE_ERR) + printk(KERN_ERR "Module async error\n"); + if (si & SUN4M_INT_M2S_WRITE_ERR) + printk(KERN_ERR "MBus/SBus async error\n"); + if (si & SUN4M_INT_ECC_ERR) + printk(KERN_ERR "ECC memory error\n"); + if (si & SUN4M_INT_VME_ERR) + printk(KERN_ERR "VME async error\n"); + printk(KERN_ERR "you lose buddy boy...\n"); + show_regs(regs); + prom_halt(); +} + +/* Exported for sun4m_smp.c */ +void sun4m_clear_profile_irq(int cpu) +{ + sbus_readl(&timers_percpu[cpu]->l14_limit); } static void sun4m_load_profile_irq(int cpu, unsigned int limit) { - sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit; + sbus_writel(limit, &timers_percpu[cpu]->l14_limit); } static void __init sun4m_init_timers(irq_handler_t counter_fn) { - int reg_count, irq, cpu; - struct linux_prom_registers cnt_regs[PROMREG_MAX]; - int obio_node, cnt_node; - struct resource r; - - cnt_node = 0; - if((obio_node = - prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 || - (obio_node = prom_getchild (obio_node)) == 0 || - (cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) { - prom_printf("Cannot find /obio/counter node\n"); - prom_halt(); + struct device_node *dp = of_find_node_by_name(NULL, "counter"); + int i, err, len, num_cpu_timers; + const u32 *addr; + + if (!dp) { + printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n"); + return; } - reg_count = prom_getproperty(cnt_node, "reg", - (void *) cnt_regs, sizeof(cnt_regs)); - reg_count = (reg_count/sizeof(struct linux_prom_registers)); - - /* Apply the obio ranges to the timer registers. */ - prom_apply_obio_ranges(cnt_regs, reg_count); - - cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr; - cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size; - cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io; - for(obio_node = 1; obio_node < 4; obio_node++) { - cnt_regs[obio_node].phys_addr = - cnt_regs[obio_node-1].phys_addr + PAGE_SIZE; - cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size; - cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io; + + addr = of_get_property(dp, "address", &len); + if (!addr) { + printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n"); + return; } - memset((char*)&r, 0, sizeof(struct resource)); - /* Map the per-cpu Counter registers. */ - r.flags = cnt_regs[0].which_io; - r.start = cnt_regs[0].phys_addr; - sun4m_timers = (struct sun4m_timer_regs *) sbus_ioremap(&r, 0, - PAGE_SIZE*SUN4M_NCPUS, "sun4m_cpu_cnt"); - /* Map the system Counter register. */ - /* XXX Here we expect consequent calls to yeld adjusent maps. */ - r.flags = cnt_regs[4].which_io; - r.start = cnt_regs[4].phys_addr; - sbus_ioremap(&r, 0, cnt_regs[4].reg_size, "sun4m_sys_cnt"); - - sun4m_timers->l10_timer_limit = (((1000000/HZ) + 1) << 10); - master_l10_counter = &sun4m_timers->l10_cur_count; - master_l10_limit = &sun4m_timers->l10_timer_limit; - - irq = request_irq(TIMER_IRQ, - counter_fn, - (IRQF_DISABLED | SA_STATIC_ALLOC), - "timer", NULL); - if (irq) { - prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ); - prom_halt(); + num_cpu_timers = (len / sizeof(u32)) - 1; + for (i = 0; i < num_cpu_timers; i++) { + timers_percpu[i] = (void __iomem *) + (unsigned long) addr[i]; } - - if (!cpu_find_by_instance(1, NULL, NULL)) { - for(cpu = 0; cpu < 4; cpu++) - sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0; - sun4m_interrupts->set = SUN4M_INT_E14; - } else { - sun4m_timers->cpu_timers[0].l14_timer_limit = 0; + timers_global = (void __iomem *) + (unsigned long) addr[num_cpu_timers]; + + sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit); + + master_l10_counter = &timers_global->l10_count; + + err = request_irq(TIMER_IRQ, counter_fn, + (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL); + if (err) { + printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n", + err); + return; } + + for (i = 0; i < num_cpu_timers; i++) + sbus_writel(0, &timers_percpu[i]->l14_limit); + if (num_cpu_timers == 4) + sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set); + #ifdef CONFIG_SMP { unsigned long flags; @@ -390,70 +427,43 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn) void __init sun4m_init_IRQ(void) { - int ie_node,i; - struct linux_prom_registers int_regs[PROMREG_MAX]; - int num_regs; - struct resource r; - int mid; - - local_irq_disable(); - if((ie_node = prom_searchsiblings(prom_getchild(prom_root_node), "obio")) == 0 || - (ie_node = prom_getchild (ie_node)) == 0 || - (ie_node = prom_searchsiblings (ie_node, "interrupt")) == 0) { - prom_printf("Cannot find /obio/interrupt node\n"); - prom_halt(); + struct device_node *dp = of_find_node_by_name(NULL, "interrupt"); + int len, i, mid, num_cpu_iregs; + const u32 *addr; + + if (!dp) { + printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n"); + return; } - num_regs = prom_getproperty(ie_node, "reg", (char *) int_regs, - sizeof(int_regs)); - num_regs = (num_regs/sizeof(struct linux_prom_registers)); - - /* Apply the obio ranges to these registers. */ - prom_apply_obio_ranges(int_regs, num_regs); - - int_regs[4].phys_addr = int_regs[num_regs-1].phys_addr; - int_regs[4].reg_size = int_regs[num_regs-1].reg_size; - int_regs[4].which_io = int_regs[num_regs-1].which_io; - for(ie_node = 1; ie_node < 4; ie_node++) { - int_regs[ie_node].phys_addr = int_regs[ie_node-1].phys_addr + PAGE_SIZE; - int_regs[ie_node].reg_size = int_regs[ie_node-1].reg_size; - int_regs[ie_node].which_io = int_regs[ie_node-1].which_io; + + addr = of_get_property(dp, "address", &len); + if (!addr) { + printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n"); + return; } - memset((char *)&r, 0, sizeof(struct resource)); - /* Map the interrupt registers for all possible cpus. */ - r.flags = int_regs[0].which_io; - r.start = int_regs[0].phys_addr; - sun4m_interrupts = (struct sun4m_intregs *) sbus_ioremap(&r, 0, - PAGE_SIZE*SUN4M_NCPUS, "interrupts_percpu"); + num_cpu_iregs = (len / sizeof(u32)) - 1; + for (i = 0; i < num_cpu_iregs; i++) { + sun4m_irq_percpu[i] = (void __iomem *) + (unsigned long) addr[i]; + } + sun4m_irq_global = (void __iomem *) + (unsigned long) addr[num_cpu_iregs]; - /* Map the system interrupt control registers. */ - r.flags = int_regs[4].which_io; - r.start = int_regs[4].phys_addr; - sbus_ioremap(&r, 0, int_regs[4].reg_size, "interrupts_system"); + local_irq_disable(); - sun4m_interrupts->set = ~SUN4M_INT_MASKALL; + sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set); for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++) - sun4m_interrupts->cpu_intregs[mid].clear = ~0x17fff; - - if (!cpu_find_by_instance(1, NULL, NULL)) { - /* system wide interrupts go to cpu 0, this should always - * be safe because it is guaranteed to be fitted or OBP doesn't - * come up - * - * Not sure, but writing here on SLAVIO systems may puke - * so I don't do it unless there is more than 1 cpu. - */ - irq_rcvreg = (unsigned long *) - &sun4m_interrupts->undirected_target; - sun4m_interrupts->undirected_target = 0; - } - BTFIXUPSET_CALL(sbint_to_irq, sun4m_sbint_to_irq, BTFIXUPCALL_NORM); + sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear); + + if (num_cpu_iregs == 4) + sbus_writel(0, &sun4m_irq_global->interrupt_target); + BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM); sparc_init_timers = sun4m_init_timers; #ifdef CONFIG_SMP @@ -461,5 +471,6 @@ void __init sun4m_init_IRQ(void) BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM); #endif + /* Cannot enable interrupts until OBP ticker is disabled. */ } diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index a14a76ac7f3..0c564ba9e70 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -71,6 +71,8 @@ void __cpuinit smp4m_callin(void) local_flush_cache_all(); local_flush_tlb_all(); + notify_cpu_starting(cpuid); + /* Get our local ticker going. */ smp_setup_percpu_timer(); @@ -313,6 +315,8 @@ void smp4m_cross_call_irq(void) ccall_info.processors_out[i] = 1; } +extern void sun4m_clear_profile_irq(int cpu); + void smp4m_percpu_timer_interrupt(struct pt_regs *regs) { struct pt_regs *old_regs; @@ -320,7 +324,7 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs) old_regs = set_irq_regs(regs); - clear_profile_irq(cpu); + sun4m_clear_profile_irq(cpu); profile_tick(CPU_PROFILING); diff --git a/arch/sparc/kernel/sun4setup.c b/arch/sparc/kernel/sun4setup.c deleted file mode 100644 index 229a52f55f1..00000000000 --- a/arch/sparc/kernel/sun4setup.c +++ /dev/null @@ -1,75 +0,0 @@ -/* sun4setup.c: Setup the hardware address of various items in the sun4 - * architecture. Called from idprom_init - * - * Copyright (C) 1998 Chris G. Davis (cdavis@cois.on.ca) - */ - -#include <asm/page.h> -#include <asm/oplib.h> -#include <asm/idprom.h> -#include <asm/sun4paddr.h> -#include <asm/machines.h> - -int sun4_memreg_physaddr; -int sun4_ie_physaddr; -int sun4_clock_physaddr; -int sun4_timer_physaddr; -int sun4_eth_physaddr; -int sun4_si_physaddr; -int sun4_bwtwo_physaddr; -int sun4_zs0_physaddr; -int sun4_zs1_physaddr; -int sun4_dma_physaddr; -int sun4_esp_physaddr; -int sun4_ie_physaddr; - -void __init sun4setup(void) -{ - printk("Sun4 Hardware Setup v1.0 18/May/98 Chris Davis (cdavis@cois.on.ca). "); - /* - setup standard sun4 info - */ - sun4_ie_physaddr=SUN4_IE_PHYSADDR; - - /* - setup model specific info - */ - switch(idprom->id_machtype) { - case (SM_SUN4 | SM_4_260 ): - printk("Setup for a SUN4/260\n"); - sun4_memreg_physaddr=SUN4_200_MEMREG_PHYSADDR; - sun4_clock_physaddr=SUN4_200_CLOCK_PHYSADDR; - sun4_timer_physaddr=SUN4_UNUSED_PHYSADDR; - sun4_eth_physaddr=SUN4_200_ETH_PHYSADDR; - sun4_si_physaddr=SUN4_200_SI_PHYSADDR; - sun4_bwtwo_physaddr=SUN4_200_BWTWO_PHYSADDR; - sun4_dma_physaddr=SUN4_UNUSED_PHYSADDR; - sun4_esp_physaddr=SUN4_UNUSED_PHYSADDR; - break; - case (SM_SUN4 | SM_4_330 ): - printk("Setup for a SUN4/330\n"); - sun4_memreg_physaddr=SUN4_300_MEMREG_PHYSADDR; - sun4_clock_physaddr=SUN4_300_CLOCK_PHYSADDR; - sun4_timer_physaddr=SUN4_300_TIMER_PHYSADDR; - sun4_eth_physaddr=SUN4_300_ETH_PHYSADDR; - sun4_si_physaddr=SUN4_UNUSED_PHYSADDR; - sun4_bwtwo_physaddr=SUN4_300_BWTWO_PHYSADDR; - sun4_dma_physaddr=SUN4_300_DMA_PHYSADDR; - sun4_esp_physaddr=SUN4_300_ESP_PHYSADDR; - break; - case (SM_SUN4 | SM_4_470 ): - printk("Setup for a SUN4/470\n"); - sun4_memreg_physaddr=SUN4_400_MEMREG_PHYSADDR; - sun4_clock_physaddr=SUN4_400_CLOCK_PHYSADDR; - sun4_timer_physaddr=SUN4_400_TIMER_PHYSADDR; - sun4_eth_physaddr=SUN4_400_ETH_PHYSADDR; - sun4_si_physaddr=SUN4_UNUSED_PHYSADDR; - sun4_bwtwo_physaddr=SUN4_400_BWTWO_PHYSADDR; - sun4_dma_physaddr=SUN4_400_DMA_PHYSADDR; - sun4_esp_physaddr=SUN4_400_ESP_PHYSADDR; - break; - default: - ; - } -} - diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c index 4d73421559c..03035c852a4 100644 --- a/arch/sparc/kernel/sys_sparc.c +++ b/arch/sparc/kernel/sys_sparc.c @@ -53,7 +53,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi /* See asm-sparc/uaccess.h */ if (len > TASK_SIZE - PAGE_SIZE) return -ENOMEM; - if (ARCH_SUN4C_SUN4 && len > 0x20000000) + if (ARCH_SUN4C && len > 0x20000000) return -ENOMEM; if (!addr) addr = TASK_UNMAPPED_BASE; @@ -65,7 +65,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { /* At this point: (!vmm || addr < vmm->vm_end). */ - if (ARCH_SUN4C_SUN4 && addr < 0xe0000000 && 0x20000000 - len < addr) { + if (ARCH_SUN4C && addr < 0xe0000000 && 0x20000000 - len < addr) { addr = PAGE_OFFSET; vmm = find_vma(current->mm, PAGE_OFFSET); } @@ -81,7 +81,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi asmlinkage unsigned long sparc_brk(unsigned long brk) { - if(ARCH_SUN4C_SUN4) { + if(ARCH_SUN4C) { if ((brk & 0xe0000000) != (current->mm->brk & 0xe0000000)) return current->mm->brk; } @@ -221,7 +221,7 @@ out: int sparc_mmap_check(unsigned long addr, unsigned long len) { - if (ARCH_SUN4C_SUN4 && + if (ARCH_SUN4C && (len > 0x20000000 || (addr < 0xe0000000 && addr + len > 0x20000000))) return -EINVAL; diff --git a/arch/sparc/kernel/tick14.c b/arch/sparc/kernel/tick14.c index 707bfda8657..138bbf5f872 100644 --- a/arch/sparc/kernel/tick14.c +++ b/arch/sparc/kernel/tick14.c @@ -1,31 +1,12 @@ /* tick14.c - * linux/arch/sparc/kernel/tick14.c * * Copyright (C) 1996 David Redman (djhr@tadpole.co.uk) * * This file handles the Sparc specific level14 ticker * This is really useful for profiling OBP uses it for keyboard * aborts and other stuff. - * - * */ -#include <linux/errno.h> -#include <linux/sched.h> #include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/timex.h> -#include <linux/interrupt.h> - -#include <asm/oplib.h> -#include <asm/timer.h> -#include <asm/mostek.h> -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include "irq.h" extern unsigned long lvl14_save[5]; static unsigned long *linux_lvl14 = NULL; @@ -56,31 +37,3 @@ void install_obp_ticker(void) linux_lvl14[2] = obp_lvl14[2]; linux_lvl14[3] = obp_lvl14[3]; } - -void claim_ticker14(irq_handler_t handler, - int irq_nr, unsigned int timeout ) -{ - int cpu = smp_processor_id(); - - /* first we copy the obp handler instructions - */ - __disable_irq(irq_nr); - if (!handler) - return; - - linux_lvl14 = (unsigned long *)lvl14_save[4]; - obp_lvl14[0] = linux_lvl14[0]; - obp_lvl14[1] = linux_lvl14[1]; - obp_lvl14[2] = linux_lvl14[2]; - obp_lvl14[3] = linux_lvl14[3]; - - if (!request_irq(irq_nr, - handler, - (IRQF_DISABLED | SA_STATIC_ALLOC), - "counter14", - NULL)) { - install_linux_ticker(); - load_profile_irq(cpu, timeout); - __enable_irq(irq_nr); - } -} diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index 0762f5db192..62c1d94cb43 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -23,22 +23,24 @@ #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/time.h> +#include <linux/rtc.h> +#include <linux/rtc/m48t59.h> #include <linux/timex.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/ioport.h> #include <linux/profile.h> +#include <linux/of.h> #include <linux/of_device.h> +#include <linux/platform_device.h> #include <asm/oplib.h> #include <asm/timer.h> -#include <asm/mostek.h> #include <asm/system.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/idprom.h> #include <asm/machines.h> -#include <asm/sun4paddr.h> #include <asm/page.h> #include <asm/pcic.h> #include <asm/irq_regs.h> @@ -46,34 +48,9 @@ #include "irq.h" DEFINE_SPINLOCK(rtc_lock); -static enum sparc_clock_type sp_clock_typ; -DEFINE_SPINLOCK(mostek_lock); -void __iomem *mstk48t02_regs = NULL; -static struct mostek48t08 __iomem *mstk48t08_regs = NULL; static int set_rtc_mmss(unsigned long); static int sbus_do_settimeofday(struct timespec *tv); -#ifdef CONFIG_SUN4 -struct intersil *intersil_clock; -#define intersil_cmd(intersil_reg, intsil_cmd) intersil_reg->int_cmd_reg = \ - (intsil_cmd) - -#define intersil_intr(intersil_reg, intsil_cmd) intersil_reg->int_intr_reg = \ - (intsil_cmd) - -#define intersil_start(intersil_reg) intersil_cmd(intersil_reg, \ - ( INTERSIL_START | INTERSIL_32K | INTERSIL_NORMAL | INTERSIL_24H |\ - INTERSIL_INTR_ENABLE)) - -#define intersil_stop(intersil_reg) intersil_cmd(intersil_reg, \ - ( INTERSIL_STOP | INTERSIL_32K | INTERSIL_NORMAL | INTERSIL_24H |\ - INTERSIL_INTR_ENABLE)) - -#define intersil_read_intr(intersil_reg, towhere) towhere = \ - intersil_reg->int_intr_reg - -#endif - unsigned long profile_pc(struct pt_regs *regs) { extern char __copy_user_begin[], __copy_user_end[]; @@ -96,7 +73,6 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); __volatile__ unsigned int *master_l10_counter; -__volatile__ unsigned int *master_l10_limit; /* * timer_interrupt() needs to keep up the real-time clock, @@ -116,15 +92,7 @@ static irqreturn_t timer_interrupt(int dummy, void *dev_id) /* Protect counter clear so that do_gettimeoffset works */ write_seqlock(&xtime_lock); -#ifdef CONFIG_SUN4 - if((idprom->id_machtype == (SM_SUN4 | SM_4_260)) || - (idprom->id_machtype == (SM_SUN4 | SM_4_110))) { - int temp; - intersil_read_intr(intersil_clock, temp); - /* re-enable the irq */ - enable_pil_irq(10); - } -#endif + clear_clock_irq(); do_timer(1); @@ -147,157 +115,56 @@ static irqreturn_t timer_interrupt(int dummy, void *dev_id) return IRQ_HANDLED; } -/* Kick start a stopped clock (procedure from the Sun NVRAM/hostid FAQ). */ -static void __devinit kick_start_clock(void) +static unsigned char mostek_read_byte(struct device *dev, u32 ofs) { - struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs; - unsigned char sec; - int i, count; - - prom_printf("CLOCK: Clock was stopped. Kick start "); - - spin_lock_irq(&mostek_lock); - - /* Turn on the kick start bit to start the oscillator. */ - regs->creg |= MSTK_CREG_WRITE; - regs->sec &= ~MSTK_STOP; - regs->hour |= MSTK_KICK_START; - regs->creg &= ~MSTK_CREG_WRITE; - - spin_unlock_irq(&mostek_lock); - - /* Delay to allow the clock oscillator to start. */ - sec = MSTK_REG_SEC(regs); - for (i = 0; i < 3; i++) { - while (sec == MSTK_REG_SEC(regs)) - for (count = 0; count < 100000; count++) - /* nothing */ ; - prom_printf("."); - sec = regs->sec; - } - prom_printf("\n"); - - spin_lock_irq(&mostek_lock); - - /* Turn off kick start and set a "valid" time and date. */ - regs->creg |= MSTK_CREG_WRITE; - regs->hour &= ~MSTK_KICK_START; - MSTK_SET_REG_SEC(regs,0); - MSTK_SET_REG_MIN(regs,0); - MSTK_SET_REG_HOUR(regs,0); - MSTK_SET_REG_DOW(regs,5); - MSTK_SET_REG_DOM(regs,1); - MSTK_SET_REG_MONTH(regs,8); - MSTK_SET_REG_YEAR(regs,1996 - MSTK_YEAR_ZERO); - regs->creg &= ~MSTK_CREG_WRITE; - - spin_unlock_irq(&mostek_lock); - - /* Ensure the kick start bit is off. If it isn't, turn it off. */ - while (regs->hour & MSTK_KICK_START) { - prom_printf("CLOCK: Kick start still on!\n"); - - spin_lock_irq(&mostek_lock); - regs->creg |= MSTK_CREG_WRITE; - regs->hour &= ~MSTK_KICK_START; - regs->creg &= ~MSTK_CREG_WRITE; - spin_unlock_irq(&mostek_lock); + struct platform_device *pdev = to_platform_device(dev); + struct m48t59_plat_data *pdata = pdev->dev.platform_data; + void __iomem *regs = pdata->ioaddr; + unsigned char val = readb(regs + ofs); + + /* the year 0 is 1968 */ + if (ofs == pdata->offset + M48T59_YEAR) { + val += 0x68; + if ((val & 0xf) > 9) + val += 6; } - - prom_printf("CLOCK: Kick start procedure successful.\n"); -} - -/* Return nonzero if the clock chip battery is low. */ -static inline int has_low_battery(void) -{ - struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs; - unsigned char data1, data2; - - spin_lock_irq(&mostek_lock); - data1 = regs->eeprom[0]; /* Read some data. */ - regs->eeprom[0] = ~data1; /* Write back the complement. */ - data2 = regs->eeprom[0]; /* Read back the complement. */ - regs->eeprom[0] = data1; /* Restore the original value. */ - spin_unlock_irq(&mostek_lock); - - return (data1 == data2); /* Was the write blocked? */ + return val; } -static void __devinit mostek_set_system_time(void) +static void mostek_write_byte(struct device *dev, u32 ofs, u8 val) { - unsigned int year, mon, day, hour, min, sec; - struct mostek48t02 *mregs; - - mregs = (struct mostek48t02 *)mstk48t02_regs; - if(!mregs) { - prom_printf("Something wrong, clock regs not mapped yet.\n"); - prom_halt(); - } - spin_lock_irq(&mostek_lock); - mregs->creg |= MSTK_CREG_READ; - sec = MSTK_REG_SEC(mregs); - min = MSTK_REG_MIN(mregs); - hour = MSTK_REG_HOUR(mregs); - day = MSTK_REG_DOM(mregs); - mon = MSTK_REG_MONTH(mregs); - year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) ); - xtime.tv_sec = mktime(year, mon, day, hour, min, sec); - xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); - mregs->creg &= ~MSTK_CREG_READ; - spin_unlock_irq(&mostek_lock); + struct platform_device *pdev = to_platform_device(dev); + struct m48t59_plat_data *pdata = pdev->dev.platform_data; + void __iomem *regs = pdata->ioaddr; + + if (ofs == pdata->offset + M48T59_YEAR) { + if (val < 0x68) + val += 0x32; + else + val -= 0x68; + if ((val & 0xf) > 9) + val += 6; + if ((val & 0xf0) > 0x9A) + val += 0x60; + } + writeb(val, regs + ofs); } -/* Probe for the real time clock chip on Sun4 */ -static inline void sun4_clock_probe(void) -{ -#ifdef CONFIG_SUN4 - int temp; - struct resource r; - - memset(&r, 0, sizeof(r)); - if( idprom->id_machtype == (SM_SUN4 | SM_4_330) ) { - sp_clock_typ = MSTK48T02; - r.start = sun4_clock_physaddr; - mstk48t02_regs = sbus_ioremap(&r, 0, - sizeof(struct mostek48t02), NULL); - mstk48t08_regs = NULL; /* To catch weirdness */ - intersil_clock = NULL; /* just in case */ - - /* Kick start the clock if it is completely stopped. */ - if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP) - kick_start_clock(); - } else if( idprom->id_machtype == (SM_SUN4 | SM_4_260)) { - /* intersil setup code */ - printk("Clock: INTERSIL at %8x ",sun4_clock_physaddr); - sp_clock_typ = INTERSIL; - r.start = sun4_clock_physaddr; - intersil_clock = (struct intersil *) - sbus_ioremap(&r, 0, sizeof(*intersil_clock), "intersil"); - mstk48t02_regs = 0; /* just be sure */ - mstk48t08_regs = NULL; /* ditto */ - /* initialise the clock */ - - intersil_intr(intersil_clock,INTERSIL_INT_100HZ); - - intersil_start(intersil_clock); - - intersil_read_intr(intersil_clock, temp); - while (!(temp & 0x80)) - intersil_read_intr(intersil_clock, temp); - - intersil_read_intr(intersil_clock, temp); - while (!(temp & 0x80)) - intersil_read_intr(intersil_clock, temp); - - intersil_stop(intersil_clock); +static struct m48t59_plat_data m48t59_data = { + .read_byte = mostek_read_byte, + .write_byte = mostek_write_byte, +}; - } -#endif -} +/* resource is set at runtime */ +static struct platform_device m48t59_rtc = { + .name = "rtc-m48t59", + .id = 0, + .num_resources = 1, + .dev = { + .platform_data = &m48t59_data, + }, +}; -#ifndef CONFIG_SUN4 static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match) { struct device_node *dp = op->node; @@ -306,38 +173,26 @@ static int __devinit clock_probe(struct of_device *op, const struct of_device_id if (!model) return -ENODEV; + m48t59_rtc.resource = &op->resource[0]; if (!strcmp(model, "mk48t02")) { - sp_clock_typ = MSTK48T02; - /* Map the clock register io area read-only */ - mstk48t02_regs = of_ioremap(&op->resource[0], 0, - sizeof(struct mostek48t02), - "mk48t02"); - mstk48t08_regs = NULL; /* To catch weirdness */ + m48t59_data.ioaddr = of_ioremap(&op->resource[0], 0, + 2048, "rtc-m48t59"); + m48t59_data.type = M48T59RTC_TYPE_M48T02; } else if (!strcmp(model, "mk48t08")) { - sp_clock_typ = MSTK48T08; - mstk48t08_regs = of_ioremap(&op->resource[0], 0, - sizeof(struct mostek48t08), - "mk48t08"); - - mstk48t02_regs = &mstk48t08_regs->regs; + m48t59_data.ioaddr = of_ioremap(&op->resource[0], 0, + 8192, "rtc-m48t59"); + m48t59_data.type = M48T59RTC_TYPE_M48T08; } else return -ENODEV; - /* Report a low battery voltage condition. */ - if (has_low_battery()) - printk(KERN_CRIT "NVRAM: Low battery voltage!\n"); - - /* Kick start the clock if it is completely stopped. */ - if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP) - kick_start_clock(); - - mostek_set_system_time(); + if (platform_device_register(&m48t59_rtc) < 0) + printk(KERN_ERR "Registering RTC device failed\n"); return 0; } -static struct of_device_id clock_match[] = { +static struct of_device_id __initdata clock_match[] = { { .name = "eeprom", }, @@ -348,7 +203,7 @@ static struct of_platform_driver clock_driver = { .match_table = clock_match, .probe = clock_probe, .driver = { - .name = "clock", + .name = "rtc", }, }; @@ -364,7 +219,6 @@ static int __init clock_init(void) * need to see the clock registers. */ fs_initcall(clock_init); -#endif /* !CONFIG_SUN4 */ static void __init sbus_time_init(void) { @@ -372,51 +226,8 @@ static void __init sbus_time_init(void) BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM); btfixup(); - if (ARCH_SUN4) - sun4_clock_probe(); - sparc_init_timers(timer_interrupt); -#ifdef CONFIG_SUN4 - if(idprom->id_machtype == (SM_SUN4 | SM_4_330)) { - mostek_set_system_time(); - } else if(idprom->id_machtype == (SM_SUN4 | SM_4_260) ) { - /* initialise the intersil on sun4 */ - unsigned int year, mon, day, hour, min, sec; - int temp; - struct intersil *iregs; - - iregs=intersil_clock; - if(!iregs) { - prom_printf("Something wrong, clock regs not mapped yet.\n"); - prom_halt(); - } - - intersil_intr(intersil_clock,INTERSIL_INT_100HZ); - disable_pil_irq(10); - intersil_stop(iregs); - intersil_read_intr(intersil_clock, temp); - - temp = iregs->clk.int_csec; - - sec = iregs->clk.int_sec; - min = iregs->clk.int_min; - hour = iregs->clk.int_hour; - day = iregs->clk.int_day; - mon = iregs->clk.int_month; - year = MSTK_CVT_YEAR(iregs->clk.int_year); - - enable_pil_irq(10); - intersil_start(iregs); - - xtime.tv_sec = mktime(year, mon, day, hour, min, sec); - xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); - printk("%u/%u/%u %u:%u:%u\n",day,mon,year,hour,min,sec); - } -#endif - /* Now that OBP ticker has been silenced, it is safe to enable IRQ. */ local_irq_enable(); } @@ -522,80 +333,15 @@ static int sbus_do_settimeofday(struct timespec *tv) return 0; } -/* - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you won't notice until after reboot! - */ -static int set_rtc_mmss(unsigned long nowtime) +static int set_rtc_mmss(unsigned long secs) { - int real_seconds, real_minutes, mostek_minutes; - struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs; - unsigned long flags; -#ifdef CONFIG_SUN4 - struct intersil *iregs = intersil_clock; - int temp; -#endif + struct rtc_device *rtc = rtc_class_open("rtc0"); + int err = -1; - /* Not having a register set can lead to trouble. */ - if (!regs) { -#ifdef CONFIG_SUN4 - if(!iregs) - return -1; - else { - temp = iregs->clk.int_csec; - - mostek_minutes = iregs->clk.int_min; - - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - mostek_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - mostek_minutes) < 30) { - intersil_stop(iregs); - iregs->clk.int_sec=real_seconds; - iregs->clk.int_min=real_minutes; - intersil_start(iregs); - } else { - printk(KERN_WARNING - "set_rtc_mmss: can't update from %d to %d\n", - mostek_minutes, real_minutes); - return -1; - } - - return 0; - } -#endif + if (rtc) { + err = rtc_set_mmss(rtc, secs); + rtc_class_close(rtc); } - spin_lock_irqsave(&mostek_lock, flags); - /* Read the current RTC minutes. */ - regs->creg |= MSTK_CREG_READ; - mostek_minutes = MSTK_REG_MIN(regs); - regs->creg &= ~MSTK_CREG_READ; - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - mostek_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - mostek_minutes) < 30) { - regs->creg |= MSTK_CREG_WRITE; - MSTK_SET_REG_SEC(regs,real_seconds); - MSTK_SET_REG_MIN(regs,real_minutes); - regs->creg &= ~MSTK_CREG_WRITE; - spin_unlock_irqrestore(&mostek_lock, flags); - return 0; - } else { - spin_unlock_irqrestore(&mostek_lock, flags); - return -1; - } + return err; } diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c index 5d45d5fd8c9..2b7d5065903 100644 --- a/arch/sparc/kernel/traps.c +++ b/arch/sparc/kernel/traps.c @@ -43,23 +43,6 @@ void syscall_trace_exit(struct pt_regs *regs) { } -void sun4m_nmi(struct pt_regs *regs) -{ - unsigned long afsr, afar; - - printk("Aieee: sun4m NMI received!\n"); - /* XXX HyperSparc hack XXX */ - __asm__ __volatile__("mov 0x500, %%g1\n\t" - "lda [%%g1] 0x4, %0\n\t" - "mov 0x600, %%g1\n\t" - "lda [%%g1] 0x4, %1\n\t" : - "=r" (afsr), "=r" (afar)); - printk("afsr=%08lx afar=%08lx\n", afsr, afar); - printk("you lose buddy boy...\n"); - show_regs(regs); - prom_halt(); -} - void sun4d_nmi(struct pt_regs *regs) { printk("Aieee: sun4d NMI received!\n"); |