diff options
Diffstat (limited to 'arch/tile/include/hv/hypervisor.h')
| -rw-r--r-- | arch/tile/include/hv/hypervisor.h | 325 |
1 files changed, 225 insertions, 100 deletions
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h index 72ec1e972f1..ccd847e2347 100644 --- a/arch/tile/include/hv/hypervisor.h +++ b/arch/tile/include/hv/hypervisor.h @@ -17,8 +17,8 @@ * The hypervisor's public API. */ -#ifndef _TILE_HV_H -#define _TILE_HV_H +#ifndef _HV_HV_H +#define _HV_HV_H #include <arch/chip.h> @@ -42,25 +42,45 @@ */ #define HV_L1_SPAN (__HV_SIZE_ONE << HV_LOG2_L1_SPAN) -/** The log2 of the size of small pages, in bytes. This value should - * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL). +/** The log2 of the initial size of small pages, in bytes. + * See HV_DEFAULT_PAGE_SIZE_SMALL. */ -#define HV_LOG2_PAGE_SIZE_SMALL 16 +#define HV_LOG2_DEFAULT_PAGE_SIZE_SMALL 16 -/** The size of small pages, in bytes. This value should be verified +/** The initial size of small pages, in bytes. This value should be verified * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL). + * It may also be modified when installing a new context. */ -#define HV_PAGE_SIZE_SMALL (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_SMALL) +#define HV_DEFAULT_PAGE_SIZE_SMALL \ + (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_SMALL) -/** The log2 of the size of large pages, in bytes. This value should be - * verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE). +/** The log2 of the initial size of large pages, in bytes. + * See HV_DEFAULT_PAGE_SIZE_LARGE. */ -#define HV_LOG2_PAGE_SIZE_LARGE 24 +#define HV_LOG2_DEFAULT_PAGE_SIZE_LARGE 24 -/** The size of large pages, in bytes. This value should be verified +/** The initial size of large pages, in bytes. This value should be verified * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE). + * It may also be modified when installing a new context. */ -#define HV_PAGE_SIZE_LARGE (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_LARGE) +#define HV_DEFAULT_PAGE_SIZE_LARGE \ + (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_LARGE) + +#if CHIP_VA_WIDTH() > 32 + +/** The log2 of the initial size of jumbo pages, in bytes. + * See HV_DEFAULT_PAGE_SIZE_JUMBO. + */ +#define HV_LOG2_DEFAULT_PAGE_SIZE_JUMBO 32 + +/** The initial size of jumbo pages, in bytes. This value should + * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_JUMBO). + * It may also be modified when installing a new context. + */ +#define HV_DEFAULT_PAGE_SIZE_JUMBO \ + (__HV_SIZE_ONE << HV_LOG2_DEFAULT_PAGE_SIZE_JUMBO) + +#endif /** The log2 of the granularity at which page tables must be aligned; * in other words, the CPA for a page table must have this many zero @@ -280,8 +300,11 @@ #define HV_DISPATCH_GET_IPI_PTE 56 #endif +/** hv_set_pte_super_shift */ +#define HV_DISPATCH_SET_PTE_SUPER_SHIFT 57 + /** One more than the largest dispatch value */ -#define _HV_DISPATCH_END 57 +#define _HV_DISPATCH_END 58 #ifndef __ASSEMBLER__ @@ -401,7 +424,18 @@ typedef enum { * that the temperature has hit an upper limit and is no longer being * accurately tracked. */ - HV_SYSCONF_BOARD_TEMP = 6 + HV_SYSCONF_BOARD_TEMP = 6, + + /** Legal page size bitmask for hv_install_context(). + * For example, if 16KB and 64KB small pages are supported, + * it would return "HV_CTX_PG_SM_16K | HV_CTX_PG_SM_64K". + */ + HV_SYSCONF_VALID_PAGE_SIZES = 7, + + /** The size of jumbo pages, in bytes. + * If no jumbo pages are available, zero will be returned. + */ + HV_SYSCONF_PAGE_SIZE_JUMBO = 8, } HV_SysconfQuery; @@ -474,7 +508,19 @@ typedef enum { HV_CONFSTR_SWITCH_CONTROL = 14, /** Chip revision level. */ - HV_CONFSTR_CHIP_REV = 15 + HV_CONFSTR_CHIP_REV = 15, + + /** CPU module part number. */ + HV_CONFSTR_CPUMOD_PART_NUM = 16, + + /** CPU module serial number. */ + HV_CONFSTR_CPUMOD_SERIAL_NUM = 17, + + /** CPU module revision level. */ + HV_CONFSTR_CPUMOD_REV = 18, + + /** Human-readable CPU module description. */ + HV_CONFSTR_CPUMOD_DESC = 19 } HV_ConfstrQuery; @@ -494,11 +540,16 @@ int hv_confstr(HV_ConfstrQuery query, HV_VirtAddr buf, int len); /** Tile coordinate */ typedef struct { +#ifndef __BIG_ENDIAN__ /** X coordinate, relative to supervisor's top-left coordinate */ int x; /** Y coordinate, relative to supervisor's top-left coordinate */ int y; +#else + int y; + int x; +#endif } HV_Coord; @@ -649,6 +700,12 @@ void hv_set_rtc(HV_RTCTime time); * new page table does not need to contain any mapping for the * hv_install_context address itself. * + * At most one HV_CTX_PG_SM_* flag may be specified in "flags"; + * if multiple flags are specified, HV_EINVAL is returned. + * Specifying none of the flags results in using the default page size. + * All cores participating in a given client must request the same + * page size, or the results are undefined. + * * @param page_table Root of the page table. * @param access PTE providing info on how to read the page table. This * value must be consistent between multiple tiles sharing a page table, @@ -667,8 +724,36 @@ int hv_install_context(HV_PhysAddr page_table, HV_PTE access, HV_ASID asid, #define HV_CTX_DIRECTIO 0x1 /**< Direct I/O requests are accepted from PL0. */ +#define HV_CTX_PG_SM_4K 0x10 /**< Use 4K small pages, if available. */ +#define HV_CTX_PG_SM_16K 0x20 /**< Use 16K small pages, if available. */ +#define HV_CTX_PG_SM_64K 0x40 /**< Use 64K small pages, if available. */ +#define HV_CTX_PG_SM_MASK 0xf0 /**< Mask of all possible small pages. */ + #ifndef __ASSEMBLER__ + +/** Set the number of pages ganged together by HV_PTE_SUPER at a + * particular level of the page table. + * + * The current TILE-Gx hardware only supports powers of four + * (i.e. log2_count must be a multiple of two), and the requested + * "super" page size must be less than the span of the next level in + * the page table. The largest size that can be requested is 64GB. + * + * The shift value is initially "0" for all page table levels, + * indicating that the HV_PTE_SUPER bit is effectively ignored. + * + * If you change the count from one non-zero value to another, the + * hypervisor will flush the entire TLB and TSB to avoid confusion. + * + * @param level Page table level (0, 1, or 2) + * @param log2_count Base-2 log of the number of pages to gang together, + * i.e. how much to shift left the base page size for the super page size. + * @return Zero on success, or a hypervisor error code on failure. + */ +int hv_set_pte_super_shift(int level, int log2_count); + + /** Value returned from hv_inquire_context(). */ typedef struct { @@ -986,8 +1071,13 @@ HV_VirtAddrRange hv_inquire_virtual(int idx); /** A range of ASID values. */ typedef struct { +#ifndef __BIG_ENDIAN__ HV_ASID start; /**< First ASID in the range. */ unsigned int size; /**< Number of ASIDs. Zero for an invalid range. */ +#else + unsigned int size; /**< Number of ASIDs. Zero for an invalid range. */ + HV_ASID start; /**< First ASID in the range. */ +#endif } HV_ASIDRange; /** Returns information about a range of ASIDs. @@ -1238,11 +1328,14 @@ HV_Errno hv_set_command_line(HV_VirtAddr buf, int length); * with the existing priority pages) or "red/black" (if they don't). * The bitmask provides information on which parts of the cache * have been used for pinned pages so far on this tile; if (1 << N) - * appears in the bitmask, that indicates that a page has been marked - * "priority" whose PFN equals N, mod 8. + * appears in the bitmask, that indicates that a 4KB region of the + * cache starting at (N * 4KB) is in use by a "priority" page. + * The portion of cache used by a particular page can be computed + * by taking the page's PA, modulo CHIP_L2_CACHE_SIZE(), and setting + * all the "4KB" bits corresponding to the actual page size. * @param bitmask A bitmap of priority page set values */ -void hv_set_caching(unsigned int bitmask); +void hv_set_caching(unsigned long bitmask); /** Zero out a specified number of pages. @@ -1308,6 +1401,7 @@ typedef enum /** Message recipient. */ typedef struct { +#ifndef __BIG_ENDIAN__ /** X coordinate, relative to supervisor's top-left coordinate */ unsigned int x:11; @@ -1316,6 +1410,11 @@ typedef struct /** Status of this recipient */ HV_Recip_State state:10; +#else //__BIG_ENDIAN__ + HV_Recip_State state:10; + unsigned int y:11; + unsigned int x:11; +#endif } HV_Recipient; /** Send a message to a set of recipients. @@ -1851,12 +1950,12 @@ int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control, #define HV_PTE_INDEX_USER 10 /**< Page is user-accessible */ #define HV_PTE_INDEX_ACCESSED 11 /**< Page has been accessed */ #define HV_PTE_INDEX_DIRTY 12 /**< Page has been written */ - /* Bits 13-15 are reserved for + /* Bits 13-14 are reserved for future use. */ +#define HV_PTE_INDEX_SUPER 15 /**< Pages ganged together for TLB */ #define HV_PTE_INDEX_MODE 16 /**< Page mode; see HV_PTE_MODE_xxx */ #define HV_PTE_MODE_BITS 3 /**< Number of bits in mode */ - /* Bit 19 is reserved for - future use. */ +#define HV_PTE_INDEX_CLIENT2 19 /**< Page client state 2 */ #define HV_PTE_INDEX_LOTAR 20 /**< Page's LOTAR; must be high bits of word */ #define HV_PTE_LOTAR_BITS 12 /**< Number of bits in a LOTAR */ @@ -1869,15 +1968,6 @@ int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control, of word */ #define HV_PTE_PTFN_BITS 29 /**< Number of bits in a PTFN */ -/** Position of the PFN field within the PTE (subset of the PTFN). */ -#define HV_PTE_INDEX_PFN (HV_PTE_INDEX_PTFN + (HV_LOG2_PAGE_SIZE_SMALL - \ - HV_LOG2_PAGE_TABLE_ALIGN)) - -/** Length of the PFN field within the PTE (subset of the PTFN). */ -#define HV_PTE_INDEX_PFN_BITS (HV_PTE_INDEX_PTFN_BITS - \ - (HV_LOG2_PAGE_SIZE_SMALL - \ - HV_LOG2_PAGE_TABLE_ALIGN)) - /* * Legal values for the PTE's mode field */ @@ -1957,7 +2047,10 @@ int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control, /** Does this PTE map a page? * - * If this bit is set in the level-1 page table, the entry should be + * If this bit is set in a level-0 page table, the entry should be + * interpreted as a level-2 page table entry mapping a jumbo page. + * + * If this bit is set in a level-1 page table, the entry should be * interpreted as a level-2 page table entry mapping a large page. * * This bit should not be modified by the client while PRESENT is set, as @@ -1967,6 +2060,18 @@ int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control, */ #define HV_PTE_PAGE (__HV_PTE_ONE << HV_PTE_INDEX_PAGE) +/** Does this PTE implicitly reference multiple pages? + * + * If this bit is set in the page table (either in the level-2 page table, + * or in a higher level page table in conjunction with the PAGE bit) + * then the PTE specifies a range of contiguous pages, not a single page. + * The hv_set_pte_super_shift() allows you to specify the count for + * each level of the page table. + * + * Note: this bit is not supported on TILEPro systems. + */ +#define HV_PTE_SUPER (__HV_PTE_ONE << HV_PTE_INDEX_SUPER) + /** Is this a global (non-ASID) mapping? * * If this bit is set, the translations established by this PTE will @@ -2046,6 +2151,13 @@ int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control, */ #define HV_PTE_CLIENT1 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT1) +/** Client-private bit in PTE. + * + * This bit is guaranteed not to be inspected or modified by the + * hypervisor. + */ +#define HV_PTE_CLIENT2 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT2) + /** Non-coherent (NC) bit in PTE. * * If this bit is set, the mapping that is set up will be non-coherent @@ -2178,8 +2290,10 @@ hv_pte_clear_##name(HV_PTE pte) \ */ _HV_BIT(present, PRESENT) _HV_BIT(page, PAGE) +_HV_BIT(super, SUPER) _HV_BIT(client0, CLIENT0) _HV_BIT(client1, CLIENT1) +_HV_BIT(client2, CLIENT2) _HV_BIT(migrating, MIGRATING) _HV_BIT(nc, NC) _HV_BIT(readable, READABLE) @@ -2222,40 +2336,11 @@ hv_pte_set_mode(HV_PTE pte, unsigned int val) * * This field contains the upper bits of the CPA (client physical * address) of the target page; the complete CPA is this field with - * HV_LOG2_PAGE_SIZE_SMALL zero bits appended to it. - * - * For PTEs in a level-1 page table where the Page bit is set, the - * CPA must be aligned modulo the large page size. - */ -static __inline unsigned int -hv_pte_get_pfn(const HV_PTE pte) -{ - return pte.val >> HV_PTE_INDEX_PFN; -} - - -/** Set the page frame number into a PTE. See hv_pte_get_pfn. */ -static __inline HV_PTE -hv_pte_set_pfn(HV_PTE pte, unsigned int val) -{ - /* - * Note that the use of "PTFN" in the next line is intentional; we - * don't want any garbage lower bits left in that field. - */ - pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS) - 1) << HV_PTE_INDEX_PTFN); - pte.val |= (__hv64) val << HV_PTE_INDEX_PFN; - return pte; -} - -/** Get the page table frame number from the PTE. - * - * This field contains the upper bits of the CPA (client physical - * address) of the target page table; the complete CPA is this field with - * with HV_PAGE_TABLE_ALIGN zero bits appended to it. + * HV_LOG2_PAGE_TABLE_ALIGN zero bits appended to it. * - * For PTEs in a level-1 page table when the Page bit is not set, the - * CPA must be aligned modulo the sticter of HV_PAGE_TABLE_ALIGN and - * the level-2 page table size. + * For all PTEs in the lowest-level page table, and for all PTEs with + * the Page bit set in all page tables, the CPA must be aligned modulo + * the relevant page size. */ static __inline unsigned long hv_pte_get_ptfn(const HV_PTE pte) @@ -2263,7 +2348,6 @@ hv_pte_get_ptfn(const HV_PTE pte) return pte.val >> HV_PTE_INDEX_PTFN; } - /** Set the page table frame number into a PTE. See hv_pte_get_ptfn. */ static __inline HV_PTE hv_pte_set_ptfn(HV_PTE pte, unsigned long val) @@ -2273,6 +2357,20 @@ hv_pte_set_ptfn(HV_PTE pte, unsigned long val) return pte; } +/** Get the client physical address from the PTE. See hv_pte_set_ptfn. */ +static __inline HV_PhysAddr +hv_pte_get_pa(const HV_PTE pte) +{ + return (__hv64) hv_pte_get_ptfn(pte) << HV_LOG2_PAGE_TABLE_ALIGN; +} + +/** Set the client physical address into a PTE. See hv_pte_get_ptfn. */ +static __inline HV_PTE +hv_pte_set_pa(HV_PTE pte, HV_PhysAddr pa) +{ + return hv_pte_set_ptfn(pte, pa >> HV_LOG2_PAGE_TABLE_ALIGN); +} + /** Get the remote tile caching this page. * @@ -2308,28 +2406,20 @@ hv_pte_set_lotar(HV_PTE pte, unsigned int val) #endif /* !__ASSEMBLER__ */ -/** Converts a client physical address to a pfn. */ -#define HV_CPA_TO_PFN(p) ((p) >> HV_LOG2_PAGE_SIZE_SMALL) - -/** Converts a pfn to a client physical address. */ -#define HV_PFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_SIZE_SMALL) - /** Converts a client physical address to a ptfn. */ #define HV_CPA_TO_PTFN(p) ((p) >> HV_LOG2_PAGE_TABLE_ALIGN) /** Converts a ptfn to a client physical address. */ #define HV_PTFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_TABLE_ALIGN) -/** Converts a ptfn to a pfn. */ -#define HV_PTFN_TO_PFN(p) \ - ((p) >> (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN)) - -/** Converts a pfn to a ptfn. */ -#define HV_PFN_TO_PTFN(p) \ - ((p) << (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN)) - #if CHIP_VA_WIDTH() > 32 +/* + * Note that we currently do not allow customizing the page size + * of the L0 pages, but fix them at 4GB, so we do not use the + * "_HV_xxx" nomenclature for the L0 macros. + */ + /** Log number of HV_PTE entries in L0 page table */ #define HV_LOG2_L0_ENTRIES (CHIP_VA_WIDTH() - HV_LOG2_L1_SPAN) @@ -2359,69 +2449,104 @@ hv_pte_set_lotar(HV_PTE pte, unsigned int val) #endif /* CHIP_VA_WIDTH() > 32 */ /** Log number of HV_PTE entries in L1 page table */ -#define HV_LOG2_L1_ENTRIES (HV_LOG2_L1_SPAN - HV_LOG2_PAGE_SIZE_LARGE) +#define _HV_LOG2_L1_ENTRIES(log2_page_size_large) \ + (HV_LOG2_L1_SPAN - log2_page_size_large) /** Number of HV_PTE entries in L1 page table */ -#define HV_L1_ENTRIES (1 << HV_LOG2_L1_ENTRIES) +#define _HV_L1_ENTRIES(log2_page_size_large) \ + (1 << _HV_LOG2_L1_ENTRIES(log2_page_size_large)) /** Log size of L1 page table in bytes */ -#define HV_LOG2_L1_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L1_ENTRIES) +#define _HV_LOG2_L1_SIZE(log2_page_size_large) \ + (HV_LOG2_PTE_SIZE + _HV_LOG2_L1_ENTRIES(log2_page_size_large)) /** Size of L1 page table in bytes */ -#define HV_L1_SIZE (1 << HV_LOG2_L1_SIZE) +#define _HV_L1_SIZE(log2_page_size_large) \ + (1 << _HV_LOG2_L1_SIZE(log2_page_size_large)) /** Log number of HV_PTE entries in level-2 page table */ -#define HV_LOG2_L2_ENTRIES (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL) +#define _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small) \ + (log2_page_size_large - log2_page_size_small) /** Number of HV_PTE entries in level-2 page table */ -#define HV_L2_ENTRIES (1 << HV_LOG2_L2_ENTRIES) +#define _HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) \ + (1 << _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small)) /** Log size of level-2 page table in bytes */ -#define HV_LOG2_L2_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L2_ENTRIES) +#define _HV_LOG2_L2_SIZE(log2_page_size_large, log2_page_size_small) \ + (HV_LOG2_PTE_SIZE + \ + _HV_LOG2_L2_ENTRIES(log2_page_size_large, log2_page_size_small)) /** Size of level-2 page table in bytes */ -#define HV_L2_SIZE (1 << HV_LOG2_L2_SIZE) +#define _HV_L2_SIZE(log2_page_size_large, log2_page_size_small) \ + (1 << _HV_LOG2_L2_SIZE(log2_page_size_large, log2_page_size_small)) #ifdef __ASSEMBLER__ #if CHIP_VA_WIDTH() > 32 /** Index in L1 for a specific VA */ -#define HV_L1_INDEX(va) \ - (((va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1)) +#define _HV_L1_INDEX(va, log2_page_size_large) \ + (((va) >> log2_page_size_large) & (_HV_L1_ENTRIES(log2_page_size_large) - 1)) #else /* CHIP_VA_WIDTH() > 32 */ /** Index in L1 for a specific VA */ -#define HV_L1_INDEX(va) \ - (((va) >> HV_LOG2_PAGE_SIZE_LARGE)) +#define _HV_L1_INDEX(va, log2_page_size_large) \ + (((va) >> log2_page_size_large)) #endif /* CHIP_VA_WIDTH() > 32 */ /** Index in level-2 page table for a specific VA */ -#define HV_L2_INDEX(va) \ - (((va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1)) +#define _HV_L2_INDEX(va, log2_page_size_large, log2_page_size_small) \ + (((va) >> log2_page_size_small) & \ + (_HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) - 1)) #else /* __ASSEMBLER __ */ #if CHIP_VA_WIDTH() > 32 /** Index in L1 for a specific VA */ -#define HV_L1_INDEX(va) \ - (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1)) +#define _HV_L1_INDEX(va, log2_page_size_large) \ + (((HV_VirtAddr)(va) >> log2_page_size_large) & \ + (_HV_L1_ENTRIES(log2_page_size_large) - 1)) #else /* CHIP_VA_WIDTH() > 32 */ /** Index in L1 for a specific VA */ -#define HV_L1_INDEX(va) \ - (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE)) +#define _HV_L1_INDEX(va, log2_page_size_large) \ + (((HV_VirtAddr)(va) >> log2_page_size_large)) #endif /* CHIP_VA_WIDTH() > 32 */ /** Index in level-2 page table for a specific VA */ -#define HV_L2_INDEX(va) \ - (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1)) +#define _HV_L2_INDEX(va, log2_page_size_large, log2_page_size_small) \ + (((HV_VirtAddr)(va) >> log2_page_size_small) & \ + (_HV_L2_ENTRIES(log2_page_size_large, log2_page_size_small) - 1)) #endif /* __ASSEMBLER __ */ -#endif /* _TILE_HV_H */ +/** Position of the PFN field within the PTE (subset of the PTFN). */ +#define _HV_PTE_INDEX_PFN(log2_page_size) \ + (HV_PTE_INDEX_PTFN + (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) + +/** Length of the PFN field within the PTE (subset of the PTFN). */ +#define _HV_PTE_INDEX_PFN_BITS(log2_page_size) \ + (HV_PTE_INDEX_PTFN_BITS - (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) + +/** Converts a client physical address to a pfn. */ +#define _HV_CPA_TO_PFN(p, log2_page_size) ((p) >> log2_page_size) + +/** Converts a pfn to a client physical address. */ +#define _HV_PFN_TO_CPA(p, log2_page_size) \ + (((HV_PhysAddr)(p)) << log2_page_size) + +/** Converts a ptfn to a pfn. */ +#define _HV_PTFN_TO_PFN(p, log2_page_size) \ + ((p) >> (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) + +/** Converts a pfn to a ptfn. */ +#define _HV_PFN_TO_PTFN(p, log2_page_size) \ + ((p) << (log2_page_size - HV_LOG2_PAGE_TABLE_ALIGN)) + +#endif /* _HV_HV_H */ |