diff options
Diffstat (limited to 'arch/tile/include/hv')
| -rw-r--r-- | arch/tile/include/hv/drv_pcie_rc_intf.h | 38 | ||||
| -rw-r--r-- | arch/tile/include/hv/hypervisor.h | 2366 | ||||
| -rw-r--r-- | arch/tile/include/hv/syscall_public.h | 42 |
3 files changed, 2446 insertions, 0 deletions
diff --git a/arch/tile/include/hv/drv_pcie_rc_intf.h b/arch/tile/include/hv/drv_pcie_rc_intf.h new file mode 100644 index 00000000000..9bd2243bece --- /dev/null +++ b/arch/tile/include/hv/drv_pcie_rc_intf.h @@ -0,0 +1,38 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * @file drv_pcie_rc_intf.h + * Interface definitions for the PCIE Root Complex. + */ + +#ifndef _SYS_HV_DRV_PCIE_RC_INTF_H +#define _SYS_HV_DRV_PCIE_RC_INTF_H + +/** File offset for reading the interrupt base number used for PCIE legacy + interrupts and PLX Gen 1 requirement flag */ +#define PCIE_RC_CONFIG_MASK_OFF 0 + + +/** + * Structure used for obtaining PCIe config information, read from the PCIE + * subsystem /ctl file at initialization + */ +typedef struct pcie_rc_config +{ + int intr; /**< interrupt number used for downcall */ + int plx_gen1; /**< flag for PLX Gen 1 configuration */ +} pcie_rc_config_t; + +#endif /* _SYS_HV_DRV_PCIE_RC_INTF_H */ diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h new file mode 100644 index 00000000000..84b31551080 --- /dev/null +++ b/arch/tile/include/hv/hypervisor.h @@ -0,0 +1,2366 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * @file hypervisor.h + * The hypervisor's public API. + */ + +#ifndef _TILE_HV_H +#define _TILE_HV_H + +#ifdef __tile__ +#include <arch/chip.h> +#else +/* HACK: Allow use by "tools/cpack/". */ +#include "install/include/arch/chip.h" +#endif + +/* Linux builds want unsigned long constants, but assembler wants numbers */ +#ifdef __ASSEMBLER__ +/** One, for assembler */ +#define __HV_SIZE_ONE 1 +#elif !defined(__tile__) && CHIP_VA_WIDTH() > 32 +/** One, for 64-bit on host */ +#define __HV_SIZE_ONE 1ULL +#else +/** One, for Linux */ +#define __HV_SIZE_ONE 1UL +#endif + + +/** The log2 of the span of a level-1 page table, in bytes. + */ +#define HV_LOG2_L1_SPAN 32 + +/** The span of a level-1 page table, in bytes. + */ +#define HV_L1_SPAN (__HV_SIZE_ONE << HV_LOG2_L1_SPAN) + +/** The log2 of the size of small pages, in bytes. This value should + * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL). + */ +#define HV_LOG2_PAGE_SIZE_SMALL 16 + +/** The size of small pages, in bytes. This value should be verified + * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL). + */ +#define HV_PAGE_SIZE_SMALL (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_SMALL) + +/** The log2 of the size of large pages, in bytes. This value should be + * verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE). + */ +#define HV_LOG2_PAGE_SIZE_LARGE 24 + +/** The size of large pages, in bytes. This value should be verified + * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE). + */ +#define HV_PAGE_SIZE_LARGE (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_LARGE) + +/** The log2 of the granularity at which page tables must be aligned; + * in other words, the CPA for a page table must have this many zero + * bits at the bottom of the address. + */ +#define HV_LOG2_PAGE_TABLE_ALIGN 11 + +/** The granularity at which page tables must be aligned. + */ +#define HV_PAGE_TABLE_ALIGN (__HV_SIZE_ONE << HV_LOG2_PAGE_TABLE_ALIGN) + +/** Normal start of hypervisor glue in client physical memory. */ +#define HV_GLUE_START_CPA 0x10000 + +/** This much space is reserved at HV_GLUE_START_CPA + * for the hypervisor glue. The client program must start at + * some address higher than this, and in particular the address of + * its text section should be equal to zero modulo HV_PAGE_SIZE_LARGE + * so that relative offsets to the HV glue are correct. + */ +#define HV_GLUE_RESERVED_SIZE 0x10000 + +/** Each entry in the hv dispatch array takes this many bytes. */ +#define HV_DISPATCH_ENTRY_SIZE 32 + +/** Version of the hypervisor interface defined by this file */ +#define _HV_VERSION 10 + +/* Index into hypervisor interface dispatch code blocks. + * + * Hypervisor calls are invoked from user space by calling code + * at an address HV_BASE_ADDRESS + (index) * HV_DISPATCH_ENTRY_SIZE, + * where index is one of these enum values. + * + * Normally a supervisor is expected to produce a set of symbols + * starting at HV_BASE_ADDRESS that obey this convention, but a user + * program could call directly through function pointers if desired. + * + * These numbers are part of the binary API and will not be changed + * without updating HV_VERSION, which should be a rare event. + */ + +/** reserved. */ +#define _HV_DISPATCH_RESERVED 0 + +/** hv_init */ +#define HV_DISPATCH_INIT 1 + +/** hv_install_context */ +#define HV_DISPATCH_INSTALL_CONTEXT 2 + +/** hv_sysconf */ +#define HV_DISPATCH_SYSCONF 3 + +/** hv_get_rtc */ +#define HV_DISPATCH_GET_RTC 4 + +/** hv_set_rtc */ +#define HV_DISPATCH_SET_RTC 5 + +/** hv_flush_asid */ +#define HV_DISPATCH_FLUSH_ASID 6 + +/** hv_flush_page */ +#define HV_DISPATCH_FLUSH_PAGE 7 + +/** hv_flush_pages */ +#define HV_DISPATCH_FLUSH_PAGES 8 + +/** hv_restart */ +#define HV_DISPATCH_RESTART 9 + +/** hv_halt */ +#define HV_DISPATCH_HALT 10 + +/** hv_power_off */ +#define HV_DISPATCH_POWER_OFF 11 + +/** hv_inquire_physical */ +#define HV_DISPATCH_INQUIRE_PHYSICAL 12 + +/** hv_inquire_memory_controller */ +#define HV_DISPATCH_INQUIRE_MEMORY_CONTROLLER 13 + +/** hv_inquire_virtual */ +#define HV_DISPATCH_INQUIRE_VIRTUAL 14 + +/** hv_inquire_asid */ +#define HV_DISPATCH_INQUIRE_ASID 15 + +/** hv_nanosleep */ +#define HV_DISPATCH_NANOSLEEP 16 + +/** hv_console_read_if_ready */ +#define HV_DISPATCH_CONSOLE_READ_IF_READY 17 + +/** hv_console_write */ +#define HV_DISPATCH_CONSOLE_WRITE 18 + +/** hv_downcall_dispatch */ +#define HV_DISPATCH_DOWNCALL_DISPATCH 19 + +/** hv_inquire_topology */ +#define HV_DISPATCH_INQUIRE_TOPOLOGY 20 + +/** hv_fs_findfile */ +#define HV_DISPATCH_FS_FINDFILE 21 + +/** hv_fs_fstat */ +#define HV_DISPATCH_FS_FSTAT 22 + +/** hv_fs_pread */ +#define HV_DISPATCH_FS_PREAD 23 + +/** hv_physaddr_read64 */ +#define HV_DISPATCH_PHYSADDR_READ64 24 + +/** hv_physaddr_write64 */ +#define HV_DISPATCH_PHYSADDR_WRITE64 25 + +/** hv_get_command_line */ +#define HV_DISPATCH_GET_COMMAND_LINE 26 + +/** hv_set_caching */ +#define HV_DISPATCH_SET_CACHING 27 + +/** hv_bzero_page */ +#define HV_DISPATCH_BZERO_PAGE 28 + +/** hv_register_message_state */ +#define HV_DISPATCH_REGISTER_MESSAGE_STATE 29 + +/** hv_send_message */ +#define HV_DISPATCH_SEND_MESSAGE 30 + +/** hv_receive_message */ +#define HV_DISPATCH_RECEIVE_MESSAGE 31 + +/** hv_inquire_context */ +#define HV_DISPATCH_INQUIRE_CONTEXT 32 + +/** hv_start_all_tiles */ +#define HV_DISPATCH_START_ALL_TILES 33 + +/** hv_dev_open */ +#define HV_DISPATCH_DEV_OPEN 34 + +/** hv_dev_close */ +#define HV_DISPATCH_DEV_CLOSE 35 + +/** hv_dev_pread */ +#define HV_DISPATCH_DEV_PREAD 36 + +/** hv_dev_pwrite */ +#define HV_DISPATCH_DEV_PWRITE 37 + +/** hv_dev_poll */ +#define HV_DISPATCH_DEV_POLL 38 + +/** hv_dev_poll_cancel */ +#define HV_DISPATCH_DEV_POLL_CANCEL 39 + +/** hv_dev_preada */ +#define HV_DISPATCH_DEV_PREADA 40 + +/** hv_dev_pwritea */ +#define HV_DISPATCH_DEV_PWRITEA 41 + +/** hv_flush_remote */ +#define HV_DISPATCH_FLUSH_REMOTE 42 + +/** hv_console_putc */ +#define HV_DISPATCH_CONSOLE_PUTC 43 + +/** hv_inquire_tiles */ +#define HV_DISPATCH_INQUIRE_TILES 44 + +/** hv_confstr */ +#define HV_DISPATCH_CONFSTR 45 + +/** hv_reexec */ +#define HV_DISPATCH_REEXEC 46 + +/** hv_set_command_line */ +#define HV_DISPATCH_SET_COMMAND_LINE 47 + +/** hv_dev_register_intr_state */ +#define HV_DISPATCH_DEV_REGISTER_INTR_STATE 48 + +/** hv_enable_intr */ +#define HV_DISPATCH_ENABLE_INTR 49 + +/** hv_disable_intr */ +#define HV_DISPATCH_DISABLE_INTR 50 + +/** hv_trigger_ipi */ +#define HV_DISPATCH_TRIGGER_IPI 51 + +/** hv_store_mapping */ +#define HV_DISPATCH_STORE_MAPPING 52 + +/** hv_inquire_realpa */ +#define HV_DISPATCH_INQUIRE_REALPA 53 + +/** hv_flush_all */ +#define HV_DISPATCH_FLUSH_ALL 54 + +/** One more than the largest dispatch value */ +#define _HV_DISPATCH_END 55 + + +#ifndef __ASSEMBLER__ + +#ifdef __KERNEL__ +#include <asm/types.h> +typedef u32 __hv32; /**< 32-bit value */ +typedef u64 __hv64; /**< 64-bit value */ +#else +#include <stdint.h> +typedef uint32_t __hv32; /**< 32-bit value */ +typedef uint64_t __hv64; /**< 64-bit value */ +#endif + + +/** Hypervisor physical address. */ +typedef __hv64 HV_PhysAddr; + +#if CHIP_VA_WIDTH() > 32 +/** Hypervisor virtual address. */ +typedef __hv64 HV_VirtAddr; +#else +/** Hypervisor virtual address. */ +typedef __hv32 HV_VirtAddr; +#endif /* CHIP_VA_WIDTH() > 32 */ + +/** Hypervisor ASID. */ +typedef unsigned int HV_ASID; + +/** Hypervisor tile location for a memory access + * ("location overridden target"). + */ +typedef unsigned int HV_LOTAR; + +/** Hypervisor size of a page. */ +typedef unsigned long HV_PageSize; + +/** A page table entry. + */ +typedef struct +{ + __hv64 val; /**< Value of PTE */ +} HV_PTE; + +/** Hypervisor error code. */ +typedef int HV_Errno; + +#endif /* !__ASSEMBLER__ */ + +#define HV_OK 0 /**< No error */ +#define HV_EINVAL -801 /**< Invalid argument */ +#define HV_ENODEV -802 /**< No such device */ +#define HV_ENOENT -803 /**< No such file or directory */ +#define HV_EBADF -804 /**< Bad file number */ +#define HV_EFAULT -805 /**< Bad address */ +#define HV_ERECIP -806 /**< Bad recipients */ +#define HV_E2BIG -807 /**< Message too big */ +#define HV_ENOTSUP -808 /**< Service not supported */ +#define HV_EBUSY -809 /**< Device busy */ +#define HV_ENOSYS -810 /**< Invalid syscall */ +#define HV_EPERM -811 /**< No permission */ +#define HV_ENOTREADY -812 /**< Device not ready */ +#define HV_EIO -813 /**< I/O error */ +#define HV_ENOMEM -814 /**< Out of memory */ + +#define HV_ERR_MAX -801 /**< Largest HV error code */ +#define HV_ERR_MIN -814 /**< Smallest HV error code */ + +#ifndef __ASSEMBLER__ + +/** Pass HV_VERSION to hv_init to request this version of the interface. */ +typedef enum { HV_VERSION = _HV_VERSION } HV_VersionNumber; + +/** Initializes the hypervisor. + * + * @param interface_version_number The version of the hypervisor interface + * that this program expects, typically HV_VERSION. + * @param chip_num Architecture number of the chip the client was built for. + * @param chip_rev_num Revision number of the chip the client was built for. + */ +void hv_init(HV_VersionNumber interface_version_number, + int chip_num, int chip_rev_num); + + +/** Queries we can make for hv_sysconf(). + * + * These numbers are part of the binary API and guaranteed not to change. + */ +typedef enum { + /** An invalid value; do not use. */ + _HV_SYSCONF_RESERVED = 0, + + /** The length of the glue section containing the hv_ procs, in bytes. */ + HV_SYSCONF_GLUE_SIZE = 1, + + /** The size of small pages, in bytes. */ + HV_SYSCONF_PAGE_SIZE_SMALL = 2, + + /** The size of large pages, in bytes. */ + HV_SYSCONF_PAGE_SIZE_LARGE = 3, + + /** Processor clock speed, in hertz. */ + HV_SYSCONF_CPU_SPEED = 4, + + /** Processor temperature, in degrees Kelvin. The value + * HV_SYSCONF_TEMP_KTOC may be subtracted from this to get degrees + * Celsius. If that Celsius value is HV_SYSCONF_OVERTEMP, this indicates + * that the temperature has hit an upper limit and is no longer being + * accurately tracked. + */ + HV_SYSCONF_CPU_TEMP = 5, + + /** Board temperature, in degrees Kelvin. The value + * HV_SYSCONF_TEMP_KTOC may be subtracted from this to get degrees + * Celsius. If that Celsius value is HV_SYSCONF_OVERTEMP, this indicates + * that the temperature has hit an upper limit and is no longer being + * accurately tracked. + */ + HV_SYSCONF_BOARD_TEMP = 6 + +} HV_SysconfQuery; + +/** Offset to subtract from returned Kelvin temperature to get degrees + Celsius. */ +#define HV_SYSCONF_TEMP_KTOC 273 + +/** Pseudo-temperature value indicating that the temperature has + * pegged at its upper limit and is no longer accurate; note that this is + * the value after subtracting HV_SYSCONF_TEMP_KTOC. */ +#define HV_SYSCONF_OVERTEMP 999 + +/** Query a configuration value from the hypervisor. + * @param query Which value is requested (HV_SYSCONF_xxx). + * @return The requested value, or -1 the requested value is illegal or + * unavailable. + */ +long hv_sysconf(HV_SysconfQuery query); + + +/** Queries we can make for hv_confstr(). + * + * These numbers are part of the binary API and guaranteed not to change. + */ +typedef enum { + /** An invalid value; do not use. */ + _HV_CONFSTR_RESERVED = 0, + + /** Board part number. */ + HV_CONFSTR_BOARD_PART_NUM = 1, + + /** Board serial number. */ + HV_CONFSTR_BOARD_SERIAL_NUM = 2, + + /** Chip serial number. */ + HV_CONFSTR_CHIP_SERIAL_NUM = 3, + + /** Board revision level. */ + HV_CONFSTR_BOARD_REV = 4, + + /** Hypervisor software version. */ + HV_CONFSTR_HV_SW_VER = 5, + + /** The name for this chip model. */ + HV_CONFSTR_CHIP_MODEL = 6, + + /** Human-readable board description. */ + HV_CONFSTR_BOARD_DESC = 7, + + /** Human-readable description of the hypervisor configuration. */ + HV_CONFSTR_HV_CONFIG = 8, + + /** Human-readable version string for the boot image (for instance, + * who built it and when, what configuration file was used). */ + HV_CONFSTR_HV_CONFIG_VER = 9, + + /** Mezzanine part number. */ + HV_CONFSTR_MEZZ_PART_NUM = 10, + + /** Mezzanine serial number. */ + HV_CONFSTR_MEZZ_SERIAL_NUM = 11, + + /** Mezzanine revision level. */ + HV_CONFSTR_MEZZ_REV = 12, + + /** Human-readable mezzanine description. */ + HV_CONFSTR_MEZZ_DESC = 13, + + /** Control path for the onboard network switch. */ + HV_CONFSTR_SWITCH_CONTROL = 14, + + /** Chip revision level. */ + HV_CONFSTR_CHIP_REV = 15 + +} HV_ConfstrQuery; + +/** Query a configuration string from the hypervisor. + * + * @param query Identifier for the specific string to be retrieved + * (HV_CONFSTR_xxx). + * @param buf Buffer in which to place the string. + * @param len Length of the buffer. + * @return If query is valid, then the length of the corresponding string, + * including the trailing null; if this is greater than len, the string + * was truncated. If query is invalid, HV_EINVAL. If the specified + * buffer is not writable by the client, HV_EFAULT. + */ +int hv_confstr(HV_ConfstrQuery query, HV_VirtAddr buf, int len); + +/** State object used to enable and disable one-shot and level-sensitive + * interrupts. */ +typedef struct +{ +#if CHIP_VA_WIDTH() > 32 + __hv64 opaque[2]; /**< No user-serviceable parts inside */ +#else + __hv32 opaque[2]; /**< No user-serviceable parts inside */ +#endif +} +HV_IntrState; + +/** A set of interrupts. */ +typedef __hv32 HV_IntrMask; + +/** Tile coordinate */ +typedef struct +{ + /** X coordinate, relative to supervisor's top-left coordinate */ + int x; + + /** Y coordinate, relative to supervisor's top-left coordinate */ + int y; +} HV_Coord; + +/** The low interrupt numbers are reserved for use by the client in + * delivering IPIs. Any interrupt numbers higher than this value are + * reserved for use by HV device drivers. */ +#define HV_MAX_IPI_INTERRUPT 7 + +/** Register an interrupt state object. This object is used to enable and + * disable one-shot and level-sensitive interrupts. Once the state is + * registered, the client must not read or write the state object; doing + * so will cause undefined results. + * + * @param intr_state Pointer to interrupt state object. + * @return HV_OK on success, or a hypervisor error code. + */ +HV_Errno hv_dev_register_intr_state(HV_IntrState* intr_state); + +/** Enable a set of one-shot and level-sensitive interrupts. + * + * @param intr_state Pointer to interrupt state object. + * @param enab_mask Bitmap of interrupts to enable. + */ +void hv_enable_intr(HV_IntrState* intr_state, HV_IntrMask enab_mask); + +/** Disable a set of one-shot and level-sensitive interrupts. + * + * @param intr_state Pointer to interrupt state object. + * @param disab_mask Bitmap of interrupts to disable. + */ +void hv_disable_intr(HV_IntrState* intr_state, HV_IntrMask disab_mask); + +/** Trigger a one-shot interrupt on some tile + * + * @param tile Which tile to interrupt. + * @param interrupt Interrupt number to trigger; must be between 0 and + * HV_MAX_IPI_INTERRUPT. + * @return HV_OK on success, or a hypervisor error code. + */ +HV_Errno hv_trigger_ipi(HV_Coord tile, int interrupt); + +/** Store memory mapping in debug memory so that external debugger can read it. + * A maximum of 16 entries can be stored. + * + * @param va VA of memory that is mapped. + * @param len Length of mapped memory. + * @param pa PA of memory that is mapped. + * @return 0 on success, -1 if the maximum number of mappings is exceeded. + */ +int hv_store_mapping(HV_VirtAddr va, unsigned int len, HV_PhysAddr pa); + +/** Given a client PA and a length, return its real (HV) PA. + * + * @param cpa Client physical address. + * @param len Length of mapped memory. + * @return physical address, or -1 if cpa or len is not valid. + */ +HV_PhysAddr hv_inquire_realpa(HV_PhysAddr cpa, unsigned int len); + +/** RTC return flag for no RTC chip present. + */ +#define HV_RTC_NO_CHIP 0x1 + +/** RTC return flag for low-voltage condition, indicating that battery had + * died and time read is unreliable. + */ +#define HV_RTC_LOW_VOLTAGE 0x2 + +/** Date/Time of day */ +typedef struct { +#if CHIP_WORD_SIZE() > 32 + __hv64 tm_sec; /**< Seconds, 0-59 */ + __hv64 tm_min; /**< Minutes, 0-59 */ + __hv64 tm_hour; /**< Hours, 0-23 */ + __hv64 tm_mday; /**< Day of month, 0-30 */ + __hv64 tm_mon; /**< Month, 0-11 */ + __hv64 tm_year; /**< Years since 1900, 0-199 */ + __hv64 flags; /**< Return flags, 0 if no error */ +#else + __hv32 tm_sec; /**< Seconds, 0-59 */ + __hv32 tm_min; /**< Minutes, 0-59 */ + __hv32 tm_hour; /**< Hours, 0-23 */ + __hv32 tm_mday; /**< Day of month, 0-30 */ + __hv32 tm_mon; /**< Month, 0-11 */ + __hv32 tm_year; /**< Years since 1900, 0-199 */ + __hv32 flags; /**< Return flags, 0 if no error */ +#endif +} HV_RTCTime; + +/** Read the current time-of-day clock. + * @return HV_RTCTime of current time (GMT). + */ +HV_RTCTime hv_get_rtc(void); + + +/** Set the current time-of-day clock. + * @param time time to reset time-of-day to (GMT). + */ +void hv_set_rtc(HV_RTCTime time); + +/** Installs a context, comprising a page table and other attributes. + * + * Once this service completes, page_table will be used to translate + * subsequent virtual address references to physical memory. + * + * Installing a context does not cause an implicit TLB flush. Before + * reusing an ASID value for a different address space, the client is + * expected to flush old references from the TLB with hv_flush_asid(). + * (Alternately, hv_flush_all() may be used to flush many ASIDs at once.) + * After invalidating a page table entry, changing its attributes, or + * changing its target CPA, the client is expected to flush old references + * from the TLB with hv_flush_page() or hv_flush_pages(). Making a + * previously invalid page valid does not require a flush. + * + * Specifying an invalid ASID, or an invalid CPA (client physical address) + * (either as page_table_pointer, or within the referenced table), + * or another page table data item documented as above as illegal may + * lead to client termination; since the validation of the table is + * done as needed, this may happen before the service returns, or at + * some later time, or never, depending upon the client's pattern of + * memory references. Page table entries which supply translations for + * invalid virtual addresses may result in client termination, or may + * be silently ignored. "Invalid" in this context means a value which + * was not provided to the client via the appropriate hv_inquire_* routine. + * + * To support changing the instruction VAs at the same time as + * installing the new page table, this call explicitly supports + * setting the "lr" register to a different address and then jumping + * directly to the hv_install_context() routine. In this case, the + * new page table does not need to contain any mapping for the + * hv_install_context address itself. + * + * @param page_table Root of the page table. + * @param access PTE providing info on how to read the page table. This + * value must be consistent between multiple tiles sharing a page table, + * and must also be consistent with any virtual mappings the client + * may be using to access the page table. + * @param asid HV_ASID the page table is to be used for. + * @param flags Context flags, denoting attributes or privileges of the + * current context (HV_CTX_xxx). + * @return Zero on success, or a hypervisor error code on failure. + */ +int hv_install_context(HV_PhysAddr page_table, HV_PTE access, HV_ASID asid, + __hv32 flags); + +#endif /* !__ASSEMBLER__ */ + +#define HV_CTX_DIRECTIO 0x1 /**< Direct I/O requests are accepted from + PL0. */ + +#ifndef __ASSEMBLER__ + +/** Value returned from hv_inquire_context(). */ +typedef struct +{ + /** Physical address of page table */ + HV_PhysAddr page_table; + + /** PTE which defines access method for top of page table */ + HV_PTE access; + + /** ASID associated with this page table */ + HV_ASID asid; + + /** Context flags */ + __hv32 flags; +} HV_Context; + +/** Retrieve information about the currently installed context. + * @return The data passed to the last successful hv_install_context call. + */ +HV_Context hv_inquire_context(void); + + +/** Flushes all translations associated with the named address space + * identifier from the TLB and any other hypervisor data structures. + * Translations installed with the "global" bit are not flushed. + * + * Specifying an invalid ASID may lead to client termination. "Invalid" + * in this context means a value which was not provided to the client + * via <tt>hv_inquire_asid()</tt>. + * + * @param asid HV_ASID whose entries are to be flushed. + * @return Zero on success, or a hypervisor error code on failure. +*/ +int hv_flush_asid(HV_ASID asid); + + +/** Flushes all translations associated with the named virtual address + * and page size from the TLB and other hypervisor data structures. Only + * pages visible to the current ASID are affected; note that this includes + * global pages in addition to pages specific to the current ASID. + * + * The supplied VA need not be aligned; it may be anywhere in the + * subject page. + * + * Specifying an invalid virtual address may lead to client termination, + * or may silently succeed. "Invalid" in this context means a value + * which was not provided to the client via hv_inquire_virtual. + * + * @param address Address of the page to flush. + * @param page_size Size of pages to assume. + * @return Zero on success, or a hypervisor error code on failure. + */ +int hv_flush_page(HV_VirtAddr address, HV_PageSize page_size); + + +/** Flushes all translations associated with the named virtual address range + * and page size from the TLB and other hypervisor data structures. Only + * pages visible to the current ASID are affected; note that this includes + * global pages in addition to pages specific to the current ASID. + * + * The supplied VA need not be aligned; it may be anywhere in the + * subject page. + * + * Specifying an invalid virtual address may lead to client termination, + * or may silently succeed. "Invalid" in this context means a value + * which was not provided to the client via hv_inquire_virtual. + * + * @param start Address to flush. + * @param page_size Size of pages to assume. + * @param size The number of bytes to flush. Any page in the range + * [start, start + size) will be flushed from the TLB. + * @return Zero on success, or a hypervisor error code on failure. + */ +int hv_flush_pages(HV_VirtAddr start, HV_PageSize page_size, + unsigned long size); + + +/** Flushes all non-global translations (if preserve_global is true), + * or absolutely all translations (if preserve_global is false). + * + * @param preserve_global Non-zero if we want to preserve "global" mappings. + * @return Zero on success, or a hypervisor error code on failure. +*/ +int hv_flush_all(int preserve_global); + + +/** Restart machine with optional restart command and optional args. + * @param cmd Const pointer to command to restart with, or NULL + * @param args Const pointer to argument string to restart with, or NULL + */ +void hv_restart(HV_VirtAddr cmd, HV_VirtAddr args); + + +/** Halt machine. */ +void hv_halt(void); + + +/** Power off machine. */ +void hv_power_off(void); + + +/** Re-enter virtual-is-physical memory translation mode and restart + * execution at a given address. + * @param entry Client physical address at which to begin execution. + * @return A hypervisor error code on failure; if the operation is + * successful the call does not return. + */ +int hv_reexec(HV_PhysAddr entry); + + +/** Chip topology */ +typedef struct +{ + /** Relative coordinates of the querying tile */ + HV_Coord coord; + + /** Width of the querying supervisor's tile rectangle. */ + int width; + + /** Height of the querying supervisor's tile rectangle. */ + int height; + +} HV_Topology; + +/** Returns information about the tile coordinate system. + * + * Each supervisor is given a rectangle of tiles it potentially controls. + * These tiles are labeled using a relative coordinate system with (0,0) as + * the upper left tile regardless of their physical location on the chip. + * + * This call returns both the size of that rectangle and the position + * within that rectangle of the querying tile. + * + * Not all tiles within that rectangle may be available to the supervisor; + * to get the precise set of available tiles, you must also call + * hv_inquire_tiles(HV_INQ_TILES_AVAIL, ...). + **/ +HV_Topology hv_inquire_topology(void); + +/** Sets of tiles we can retrieve with hv_inquire_tiles(). + * + * These numbers are part of the binary API and guaranteed not to change. + */ +typedef enum { + /** An invalid value; do not use. */ + _HV_INQ_TILES_RESERVED = 0, + + /** All available tiles within the supervisor's tile rectangle. */ + HV_INQ_TILES_AVAIL = 1, + + /** The set of tiles used for hash-for-home caching. */ + HV_INQ_TILES_HFH_CACHE = 2, + + /** The set of tiles that can be legally used as a LOTAR for a PTE. */ + HV_INQ_TILES_LOTAR = 3 +} HV_InqTileSet; + +/** Returns specific information about various sets of tiles within the + * supervisor's tile rectangle. + * + * @param set Which set of tiles to retrieve. + * @param cpumask Pointer to a returned bitmask (in row-major order, + * supervisor-relative) of tiles. The low bit of the first word + * corresponds to the tile at the upper left-hand corner of the + * supervisor's rectangle. In order for the supervisor to know the + * buffer length to supply, it should first call hv_inquire_topology. + * @param length Number of bytes available for the returned bitmask. + **/ +HV_Errno hv_inquire_tiles(HV_InqTileSet set, HV_VirtAddr cpumask, int length); + + +/** An identifier for a memory controller. Multiple memory controllers + * may be connected to one chip, and this uniquely identifies each one. + */ +typedef int HV_MemoryController; + +/** A range of physical memory. */ +typedef struct +{ + HV_PhysAddr start; /**< Starting address. */ + __hv64 size; /**< Size in bytes. */ + HV_MemoryController controller; /**< Which memory controller owns this. */ +} HV_PhysAddrRange; + +/** Returns information about a range of physical memory. + * + * hv_inquire_physical() returns one of the ranges of client + * physical addresses which are available to this client. + * + * The first range is retrieved by specifying an idx of 0, and + * successive ranges are returned with subsequent idx values. Ranges + * are ordered by increasing start address (i.e., as idx increases, + * so does start), do not overlap, and do not touch (i.e., the + * available memory is described with the fewest possible ranges). + * + * If an out-of-range idx value is specified, the returned size will be zero. + * A client can count the number of ranges by increasing idx until the + * returned size is zero. There will always be at least one valid range. + * + * Some clients might not be prepared to deal with more than one + * physical address range; they still ought to call this routine and + * issue a warning message if they're given more than one range, on the + * theory that whoever configured the hypervisor to provide that memory + * should know that it's being wasted. + */ +HV_PhysAddrRange hv_inquire_physical(int idx); + + +/** Memory controller information. */ +typedef struct +{ + HV_Coord coord; /**< Relative tile coordinates of the port used by a + specified tile to communicate with this controller. */ + __hv64 speed; /**< Speed of this controller in bytes per second. */ +} HV_MemoryControllerInfo; + +/** Returns information about a particular memory controller. + * + * hv_inquire_memory_controller(coord,idx) returns information about a + * particular controller. Two pieces of information are returned: + * - The relative coordinates of the port on the controller that the specified + * tile would use to contact it. The relative coordinates may lie + * outside the supervisor's rectangle, i.e. the controller may not + * be attached to a node managed by the querying node's supervisor. + * In particular note that x or y may be negative. + * - The speed of the memory controller. (This is a not-to-exceed value + * based on the raw hardware data rate, and may not be achievable in + * practice; it is provided to give clients information on the relative + * performance of the available controllers.) + * + * Clients should avoid calling this interface with invalid values. + * A client who does may be terminated. + * @param coord Tile for which to calculate the relative port position. + * @param controller Index of the controller; identical to value returned + * from other routines like hv_inquire_physical. + * @return Information about the controller. + */ +HV_MemoryControllerInfo hv_inquire_memory_controller(HV_Coord coord, + int controller); + + +/** A range of virtual memory. */ +typedef struct +{ + HV_VirtAddr start; /**< Starting address. */ + __hv64 size; /**< Size in bytes. */ +} HV_VirtAddrRange; + +/** Returns information about a range of virtual memory. + * + * hv_inquire_virtual() returns one of the ranges of client + * virtual addresses which are available to this client. + * + * The first range is retrieved by specifying an idx of 0, and + * successive ranges are returned with subsequent idx values. Ranges + * are ordered by increasing start address (i.e., as idx increases, + * so does start), do not overlap, and do not touch (i.e., the + * available memory is described with the fewest possible ranges). + * + * If an out-of-range idx value is specified, the returned size will be zero. + * A client can count the number of ranges by increasing idx until the + * returned size is zero. There will always be at least one valid range. + * + * Some clients may well have various virtual addresses hardwired + * into themselves; for instance, their instruction stream may + * have been compiled expecting to live at a particular address. + * Such clients should use this interface to verify they've been + * given the virtual address space they expect, and issue a (potentially + * fatal) warning message otherwise. + * + * Note that the returned size is a __hv64, not a __hv32, so it is + * possible to express a single range spanning the entire 32-bit + * address space. + */ +HV_VirtAddrRange hv_inquire_virtual(int idx); + + +/** A range of ASID values. */ +typedef struct +{ + HV_ASID start; /**< First ASID in the range. */ + unsigned int size; /**< Number of ASIDs. Zero for an invalid range. */ +} HV_ASIDRange; + +/** Returns information about a range of ASIDs. + * + * hv_inquire_asid() returns one of the ranges of address + * space identifiers which are available to this client. + * + * The first range is retrieved by specifying an idx of 0, and + * successive ranges are returned with subsequent idx values. Ranges + * are ordered by increasing start value (i.e., as idx increases, + * so does start), do not overlap, and do not touch (i.e., the + * available ASIDs are described with the fewest possible ranges). + * + * If an out-of-range idx value is specified, the returned size will be zero. + * A client can count the number of ranges by increasing idx until the + * returned size is zero. There will always be at least one valid range. + */ +HV_ASIDRange hv_inquire_asid(int idx); + + +/** Waits for at least the specified number of nanoseconds then returns. + * + * @param nanosecs The number of nanoseconds to sleep. + */ +void hv_nanosleep(int nanosecs); + + +/** Reads a character from the console without blocking. + * + * @return A value from 0-255 indicates the value successfully read. + * A negative value means no value was ready. + */ +int hv_console_read_if_ready(void); + + +/** Writes a character to the console, blocking if the console is busy. + * + * This call cannot fail. If the console is broken for some reason, + * output will simply vanish. + * @param byte Character to write. + */ +void hv_console_putc(int byte); + + +/** Writes a string to the console, blocking if the console is busy. + * @param bytes Pointer to characters to write. + * @param len Number of characters to write. + * @return Number of characters written, or HV_EFAULT if the buffer is invalid. + */ +int hv_console_write(HV_VirtAddr bytes, int len); + + +/** Dispatch the next interrupt from the client downcall mechanism. + * + * The hypervisor uses downcalls to notify the client of asynchronous + * events. Some of these events are hypervisor-created (like incoming + * messages). Some are regular interrupts which initially occur in + * the hypervisor, and are normally handled directly by the client; + * when these occur in a client's interrupt critical section, they must + * be delivered through the downcall mechanism. + * + * A downcall is initially delivered to the client as an INTCTRL_1 + * interrupt. Upon entry to the INTCTRL_1 vector, the client must + * immediately invoke the hv_downcall_dispatch service. This service + * will not return; instead it will cause one of the client's actual + * downcall-handling interrupt vectors to be entered. The EX_CONTEXT + * registers in the client will be set so that when the client irets, + * it will return to the code which was interrupted by the INTCTRL_1 + * interrupt. + * + * Any saving of registers should be done by the actual handling + * vectors; no registers should be changed by the INTCTRL_1 handler. + * In particular, the client should not use a jal instruction to invoke + * the hv_downcall_dispatch service, as that would overwrite the client's + * lr register. Note that the hv_downcall_dispatch service may overwrite + * one or more of the client's system save registers. + * + * The client must not modify the INTCTRL_1_STATUS SPR. The hypervisor + * will set this register to cause a downcall to happen, and will clear + * it when no further downcalls are pending. + * + * When a downcall vector is entered, the INTCTRL_1 interrupt will be + * masked. When the client is done processing a downcall, and is ready + * to accept another, it must unmask this interrupt; if more downcalls + * are pending, this will cause the INTCTRL_1 vector to be reentered. + * Currently the following interrupt vectors can be entered through a + * downcall: + * + * INT_MESSAGE_RCV_DWNCL (hypervisor message available) + * INT_DMATLB_MISS_DWNCL (DMA TLB miss) + * INT_SNITLB_MISS_DWNCL (SNI TLB miss) + * INT_DMATLB_ACCESS_DWNCL (DMA TLB access violation) + */ +void hv_downcall_dispatch(void); + +#endif /* !__ASSEMBLER__ */ + +/** We use actual interrupt vectors which never occur (they're only there + * to allow setting MPLs for related SPRs) for our downcall vectors. + */ +/** Message receive downcall interrupt vector */ +#define INT_MESSAGE_RCV_DWNCL INT_BOOT_ACCESS +/** DMA TLB miss downcall interrupt vector */ +#define INT_DMATLB_MISS_DWNCL INT_DMA_ASID +/** Static nework processor instruction TLB miss interrupt vector */ +#define INT_SNITLB_MISS_DWNCL INT_SNI_ASID +/** DMA TLB access violation downcall interrupt vector */ +#define INT_DMATLB_ACCESS_DWNCL INT_DMA_CPL +/** Device interrupt downcall interrupt vector */ +#define INT_DEV_INTR_DWNCL INT_WORLD_ACCESS + +#ifndef __ASSEMBLER__ + +/** Requests the inode for a specific full pathname. + * + * Performs a lookup in the hypervisor filesystem for a given filename. + * Multiple calls with the same filename will always return the same inode. + * If there is no such filename, HV_ENOENT is returned. + * A bad filename pointer may result in HV_EFAULT instead. + * + * @param filename Constant pointer to name of requested file + * @return Inode of requested file + */ +int hv_fs_findfile(HV_VirtAddr filename); + + +/** Data returned from an fstat request. + * Note that this structure should be no more than 40 bytes in size so + * that it can always be returned completely in registers. + */ +typedef struct +{ + int size; /**< Size of file (or HV_Errno on error) */ + unsigned int flags; /**< Flags (see HV_FS_FSTAT_FLAGS) */ +} HV_FS_StatInfo; + +/** Bitmask flags for fstat request */ +typedef enum +{ + HV_FS_ISDIR = 0x0001 /**< Is the entry a directory? */ +} HV_FS_FSTAT_FLAGS; + +/** Get stat information on a given file inode. + * + * Return information on the file with the given inode. + * + * IF the HV_FS_ISDIR bit is set, the "file" is a directory. Reading + * it will return NUL-separated filenames (no directory part) relative + * to the path to the inode of the directory "file". These can be + * appended to the path to the directory "file" after a forward slash + * to create additional filenames. Note that it is not required + * that all valid paths be decomposable into valid parent directories; + * a filesystem may validly have just a few files, none of which have + * HV_FS_ISDIR set. However, if clients may wish to enumerate the + * files in the filesystem, it is recommended to include all the + * appropriate parent directory "files" to give a consistent view. + * + * An invalid file inode will cause an HV_EBADF error to be returned. + * + * @param inode The inode number of the query + * @return An HV_FS_StatInfo structure + */ +HV_FS_StatInfo hv_fs_fstat(int inode); + + +/** Read data from a specific hypervisor file. + * On error, may return HV_EBADF for a bad inode or HV_EFAULT for a bad buf. + * Reads near the end of the file will return fewer bytes than requested. + * Reads at or beyond the end of a file will return zero. + * + * @param inode the hypervisor file to read + * @param buf the buffer to read data into + * @param length the number of bytes of data to read + * @param offset the offset into the file to read the data from + * @return number of bytes successfully read, or an HV_Errno code + */ +int hv_fs_pread(int inode, HV_VirtAddr buf, int length, int offset); + + +/** Read a 64-bit word from the specified physical address. + * The address must be 8-byte aligned. + * Specifying an invalid physical address will lead to client termination. + * @param addr The physical address to read + * @param access The PTE describing how to read the memory + * @return The 64-bit value read from the given address + */ +unsigned long long hv_physaddr_read64(HV_PhysAddr addr, HV_PTE access); + + +/** Write a 64-bit word to the specified physical address. + * The address must be 8-byte aligned. + * Specifying an invalid physical address will lead to client termination. + * @param addr The physical address to write + * @param access The PTE that says how to write the memory + * @param val The 64-bit value to write to the given address + */ +void hv_physaddr_write64(HV_PhysAddr addr, HV_PTE access, + unsigned long long val); + + +/** Get the value of the command-line for the supervisor, if any. + * This will not include the filename of the booted supervisor, but may + * include configured-in boot arguments or the hv_restart() arguments. + * If the buffer is not long enough the hypervisor will NUL the first + * character of the buffer but not write any other data. + * @param buf The virtual address to write the command-line string to. + * @param length The length of buf, in characters. + * @return The actual length of the command line, including the trailing NUL + * (may be larger than "length"). + */ +int hv_get_command_line(HV_VirtAddr buf, int length); + + +/** Set a new value for the command-line for the supervisor, which will + * be returned from subsequent invocations of hv_get_command_line() on + * this tile. + * @param buf The virtual address to read the command-line string from. + * @param length The length of buf, in characters; must be no more than + * HV_COMMAND_LINE_LEN. + * @return Zero if successful, or a hypervisor error code. + */ +HV_Errno hv_set_command_line(HV_VirtAddr buf, int length); + +/** Maximum size of a command line passed to hv_set_command_line(); note + * that a line returned from hv_get_command_line() could be larger than + * this.*/ +#define HV_COMMAND_LINE_LEN 256 + +/** Tell the hypervisor how to cache non-priority pages + * (its own as well as pages explicitly represented in page tables). + * Normally these will be represented as red/black pages, but + * when the supervisor starts to allocate "priority" pages in the PTE + * the hypervisor will need to start marking those pages as (e.g.) "red" + * and non-priority pages as either "black" (if they cache-alias + * with the existing priority pages) or "red/black" (if they don't). + * The bitmask provides information on which parts of the cache + * have been used for pinned pages so far on this tile; if (1 << N) + * appears in the bitmask, that indicates that a page has been marked + * "priority" whose PFN equals N, mod 8. + * @param bitmask A bitmap of priority page set values + */ +void hv_set_caching(unsigned int bitmask); + + +/** Zero out a specified number of pages. + * The va and size must both be multiples of 4096. + * Caches are bypassed and memory is directly set to zero. + * This API is implemented only in the magic hypervisor and is intended + * to provide a performance boost to the minimal supervisor by + * giving it a fast way to zero memory pages when allocating them. + * @param va Virtual address where the page has been mapped + * @param size Number of bytes (must be a page size multiple) + */ +void hv_bzero_page(HV_VirtAddr va, unsigned int size); + + +/** State object for the hypervisor messaging subsystem. */ +typedef struct +{ +#if CHIP_VA_WIDTH() > 32 + __hv64 opaque[2]; /**< No user-serviceable parts inside */ +#else + __hv32 opaque[2]; /**< No user-serviceable parts inside */ +#endif +} +HV_MsgState; + +/** Register to receive incoming messages. + * + * This routine configures the current tile so that it can receive + * incoming messages. It must be called before the client can receive + * messages with the hv_receive_message routine, and must be called on + * each tile which will receive messages. + * + * msgstate is the virtual address of a state object of type HV_MsgState. + * Once the state is registered, the client must not read or write the + * state object; doing so will cause undefined results. + * + * If this routine is called with msgstate set to 0, the client's message + * state will be freed and it will no longer be able to receive messages. + * Note that this may cause the loss of any as-yet-undelivered messages + * for the client. + * + * If another client attempts to send a message to a client which has + * not yet called hv_register_message_state, or which has freed its + * message state, the message will not be delivered, as if the client + * had insufficient buffering. + * + * This routine returns HV_OK if the registration was successful, and + * HV_EINVAL if the supplied state object is unsuitable. Note that some + * errors may not be detected during this routine, but might be detected + * during a subsequent message delivery. + * @param msgstate State object. + **/ +HV_Errno hv_register_message_state(HV_MsgState* msgstate); + +/** Possible message recipient states. */ +typedef enum +{ + HV_TO_BE_SENT, /**< Not sent (not attempted, or recipient not ready) */ + HV_SENT, /**< Successfully sent */ + HV_BAD_RECIP /**< Bad recipient coordinates (permanent error) */ +} HV_Recip_State; + +/** Message recipient. */ +typedef struct +{ + /** X coordinate, relative to supervisor's top-left coordinate */ + unsigned int x:11; + + /** Y coordinate, relative to supervisor's top-left coordinate */ + unsigned int y:11; + + /** Status of this recipient */ + HV_Recip_State state:10; +} HV_Recipient; + +/** Send a message to a set of recipients. + * + * This routine sends a message to a set of recipients. + * + * recips is an array of HV_Recipient structures. Each specifies a tile, + * and a message state; initially, it is expected that the state will + * be set to HV_TO_BE_SENT. nrecip specifies the number of recipients + * in the recips array. + * + * For each recipient whose state is HV_TO_BE_SENT, the hypervisor attempts + * to send that tile the specified message. In order to successfully + * receive the message, the receiver must be a valid tile to which the + * sender has access, must not be the sending tile itself, and must have + * sufficient free buffer space. (The hypervisor guarantees that each + * tile which has called hv_register_message_state() will be able to + * buffer one message from every other tile which can legally send to it; + * more space may be provided but is not guaranteed.) If an invalid tile + * is specified, the recipient's state is set to HV_BAD_RECIP; this is a + * permanent delivery error. If the message is successfully delivered + * to the recipient's buffer, the recipient's state is set to HV_SENT. + * Otherwise, the recipient's state is unchanged. Message delivery is + * synchronous; all attempts to send messages are completed before this + * routine returns. + * + * If no permanent delivery errors were encountered, the routine returns + * the number of messages successfully sent: that is, the number of + * recipients whose states changed from HV_TO_BE_SENT to HV_SENT during + * this operation. If any permanent delivery errors were encountered, + * the routine returns HV_ERECIP. In the event of permanent delivery + * errors, it may be the case that delivery was not attempted to all + * recipients; if any messages were succesfully delivered, however, + * recipients' state values will be updated appropriately. + * + * It is explicitly legal to specify a recipient structure whose state + * is not HV_TO_BE_SENT; such a recipient is ignored. One suggested way + * of using hv_send_message to send a message to multiple tiles is to set + * up a list of recipients, and then call the routine repeatedly with the + * same list, each time accumulating the number of messages successfully + * sent, until all messages are sent, a permanent error is encountered, + * or the desired number of attempts have been made. When used in this + * way, the routine will deliver each message no more than once to each + * recipient. + * + * Note that a message being successfully delivered to the recipient's + * buffer space does not guarantee that it is received by the recipient, + * either immediately or at any time in the future; the recipient might + * never call hv_receive_message, or could register a different state + * buffer, losing the message. + * + * Specifiying the same recipient more than once in the recipient list + * is an error, which will not result in an error return but which may + * or may not result in more than one message being delivered to the + * recipient tile. + * + * buf and buflen specify the message to be sent. buf is a virtual address + * which must be currently mapped in the client's page table; if not, the + * routine returns HV_EFAULT. buflen must be greater than zero and less + * than or equal to HV_MAX_MESSAGE_SIZE, and nrecip must be less than the + * number of tiles to which the sender has access; if not, the routine + * returns HV_EINVAL. + * @param recips List of recipients. + * @param nrecip Number of recipients. + * @param buf Address of message data. + * @param buflen Length of message data. + **/ +int hv_send_message(HV_Recipient *recips, int nrecip, + HV_VirtAddr buf, int buflen); + +/** Maximum hypervisor message size, in bytes */ +#define HV_MAX_MESSAGE_SIZE 28 + + +/** Return value from hv_receive_message() */ +typedef struct +{ + int msglen; /**< Message length in bytes, or an error code */ + __hv32 source; /**< Code identifying message sender (HV_MSG_xxx) */ +} HV_RcvMsgInfo; + +#define HV_MSG_TILE 0x0 /**< Message source is another tile */ +#define HV_MSG_INTR 0x1 /**< Message source is a driver interrupt */ + +/** Receive a message. + * + * This routine retrieves a message from the client's incoming message + * buffer. + * + * Multiple messages sent from a particular sending tile to a particular + * receiving tile are received in the order that they were sent; however, + * no ordering is guaranteed between messages sent by different tiles. + * + * Whenever the a client's message buffer is empty, the first message + * subsequently received will cause the client's MESSAGE_RCV_DWNCL + * interrupt vector to be invoked through the interrupt downcall mechanism + * (see the description of the hv_downcall_dispatch() routine for details + * on downcalls). + * + * Another message-available downcall will not occur until a call to + * this routine is made when the message buffer is empty, and a message + * subsequently arrives. Note that such a downcall could occur while + * this routine is executing. If the calling code does not wish this + * to happen, it is recommended that this routine be called with the + * INTCTRL_1 interrupt masked, or inside an interrupt critical section. + * + * msgstate is the value previously passed to hv_register_message_state(). + * buf is the virtual address of the buffer into which the message will + * be written; buflen is the length of the buffer. + * + * This routine returns an HV_RcvMsgInfo structure. The msglen member + * of that structure is the length of the message received, zero if no + * message is available, or HV_E2BIG if the message is too large for the + * specified buffer. If the message is too large, it is not consumed, + * and may be retrieved by a subsequent call to this routine specifying + * a sufficiently large buffer. A buffer which is HV_MAX_MESSAGE_SIZE + * bytes long is guaranteed to be able to receive any possible message. + * + * The source member of the HV_RcvMsgInfo structure describes the sender + * of the message. For messages sent by another client tile via an + * hv_send_message() call, this value is HV_MSG_TILE; for messages sent + * as a result of a device interrupt, this value is HV_MSG_INTR. + */ + +HV_RcvMsgInfo hv_receive_message(HV_MsgState msgstate, HV_VirtAddr buf, + int buflen); + + +/** Start remaining tiles owned by this supervisor. Initially, only one tile + * executes the client program; after it calls this service, the other tiles + * are started. This allows the initial tile to do one-time configuration + * of shared data structures without having to lock them against simultaneous + * access. + */ +void hv_start_all_tiles(void); + + +/** Open a hypervisor device. + * + * This service initializes an I/O device and its hypervisor driver software, + * and makes it available for use. The open operation is per-device per-chip; + * once it has been performed, the device handle returned may be used in other + * device services calls made by any tile. + * + * @param name Name of the device. A base device name is just a text string + * (say, "pcie"). If there is more than one instance of a device, the + * base name is followed by a slash and a device number (say, "pcie/0"). + * Some devices may support further structure beneath those components; + * most notably, devices which require control operations do so by + * supporting reads and/or writes to a control device whose name + * includes a trailing "/ctl" (say, "pcie/0/ctl"). + * @param flags Flags (HV_DEV_xxx). + * @return A positive integer device handle, or a negative error code. + */ +int hv_dev_open(HV_VirtAddr name, __hv32 flags); + + +/** Close a hypervisor device. + * + * This service uninitializes an I/O device and its hypervisor driver + * software, and makes it unavailable for use. The close operation is + * per-device per-chip; once it has been performed, the device is no longer + * available. Normally there is no need to ever call the close service. + * + * @param devhdl Device handle of the device to be closed. + * @return Zero if the close is successful, otherwise, a negative error code. + */ +int hv_dev_close(int devhdl); + + +/** Read data from a hypervisor device synchronously. + * + * This service transfers data from a hypervisor device to a memory buffer. + * When the service returns, the data has been written from the memory buffer, + * and the buffer will not be further modified by the driver. + * + * No ordering is guaranteed between requests issued from different tiles. + * + * Devices may choose to support both the synchronous and asynchronous read + * operations, only one of them, or neither of them. + * + * @param devhdl Device handle of the device to be read from. + * @param flags Flags (HV_DEV_xxx). + * @param va Virtual address of the target data buffer. This buffer must + * be mapped in the currently installed page table; if not, HV_EFAULT + * may be returned. + * @param len Number of bytes to be transferred. + * @param offset Driver-dependent offset. For a random-access device, this is + * often a byte offset from the beginning of the device; in other cases, + * like on a control device, it may have a different meaning. + * @return A non-negative value if the read was at least partially successful; + * otherwise, a negative error code. The precise interpretation of + * the return value is driver-dependent, but many drivers will return + * the number of bytes successfully transferred. + */ +int hv_dev_pread(int devhdl, __hv32 flags, HV_VirtAddr va, __hv32 len, + __hv64 offset); + +#define HV_DEV_NB_EMPTY 0x1 /**< Don't block when no bytes of data can + be transferred. */ +#define HV_DEV_NB_PARTIAL 0x2 /**< Don't block when some bytes, but not all + of the requested bytes, can be + transferred. */ +#define HV_DEV_NOCACHE 0x4 /**< The caller warrants that none of the + cache lines which might contain data + from the requested buffer are valid. + Useful with asynchronous operations + only. */ + +#define HV_DEV_ALLFLAGS (HV_DEV_NB_EMPTY | HV_DEV_NB_PARTIAL | \ + HV_DEV_NOCACHE) /**< All HV_DEV_xxx flags */ + +/** Write data to a hypervisor device synchronously. + * + * This service transfers data from a memory buffer to a hypervisor device. + * When the service returns, the data has been read from the memory buffer, + * and the buffer may be overwritten by the client; the data may not + * necessarily have been conveyed to the actual hardware I/O interface. + * + * No ordering is guaranteed between requests issued from different tiles. + * + * Devices may choose to support both the synchronous and asynchronous write + * operations, only one of them, or neither of them. + * + * @param devhdl Device handle of the device to be written to. + * @param flags Flags (HV_DEV_xxx). + * @param va Virtual address of the source data buffer. This buffer must + * be mapped in the currently installed page table; if not, HV_EFAULT + * may be returned. + * @param len Number of bytes to be transferred. + * @param offset Driver-dependent offset. For a random-access device, this is + * often a byte offset from the beginning of the device; in other cases, + * like on a control device, it may have a different meaning. + * @return A non-negative value if the write was at least partially successful; + * otherwise, a negative error code. The precise interpretation of + * the return value is driver-dependent, but many drivers will return + * the number of bytes successfully transferred. + */ +int hv_dev_pwrite(int devhdl, __hv32 flags, HV_VirtAddr va, __hv32 len, + __hv64 offset); + + +/** Interrupt arguments, used in the asynchronous I/O interfaces. */ +#if CHIP_VA_WIDTH() > 32 +typedef __hv64 HV_IntArg; +#else +typedef __hv32 HV_IntArg; +#endif + +/** Interrupt messages are delivered via the mechanism as normal messages, + * but have a message source of HV_DEV_INTR. The message is formatted + * as an HV_IntrMsg structure. + */ + +typedef struct +{ + HV_IntArg intarg; /**< Interrupt argument, passed to the poll/preada/pwritea + services */ + HV_IntArg intdata; /**< Interrupt-specific interrupt data */ +} HV_IntrMsg; + +/** Request an interrupt message when a device condition is satisfied. + * + * This service requests that an interrupt message be delivered to the + * requesting tile when a device becomes readable or writable, or when any + * data queued to the device via previous write operations from this tile + * has been actually sent out on the hardware I/O interface. Devices may + * choose to support any, all, or none of the available conditions. + * + * If multiple conditions are specified, only one message will be + * delivered. If the event mask delivered to that interrupt handler + * indicates that some of the conditions have not yet occurred, the + * client must issue another poll() call if it wishes to wait for those + * conditions. + * + * Only one poll may be outstanding per device handle per tile. If more than + * one tile is polling on the same device and condition, they will all be + * notified when it happens. Because of this, clients may not assume that + * the condition signaled is necessarily still true when they request a + * subsequent service; for instance, the readable data which caused the + * poll call to interrupt may have been read by another tile in the interim. + * + * The notification interrupt message could come directly, or via the + * downcall (intctrl1) method, depending on what the tile is doing + * when the condition is satisfied. Note that it is possible for the + * requested interrupt to be delivered after this service is called but + * before it returns. + * + * @param devhdl Device handle of the device to be polled. + * @param events Flags denoting the events which will cause the interrupt to + * be delivered (HV_DEVPOLL_xxx). + * @param intarg Value which will be delivered as the intarg member of the + * eventual interrupt message; the intdata member will be set to a + * mask of HV_DEVPOLL_xxx values indicating which conditions have been + * satisifed. + * @return Zero if the interrupt was successfully scheduled; otherwise, a + * negative error code. + */ +int hv_dev_poll(int devhdl, __hv32 events, HV_IntArg intarg); + +#define HV_DEVPOLL_READ 0x1 /**< Test device for readability */ +#define HV_DEVPOLL_WRITE 0x2 /**< Test device for writability */ +#define HV_DEVPOLL_FLUSH 0x4 /**< Test device for output drained */ + + +/** Cancel a request for an interrupt when a device event occurs. + * + * This service requests that no interrupt be delivered when the events + * noted in the last-issued poll() call happen. Once this service returns, + * the interrupt has been canceled; however, it is possible for the interrupt + * to be delivered after this service is called but before it returns. + * + * @param devhdl Device handle of the device on which to cancel polling. + * @return Zero if the poll was successfully canceled; otherwise, a negative + * error code. + */ +int hv_dev_poll_cancel(int devhdl); + + +/** Scatter-gather list for preada/pwritea calls. */ +typedef struct +#if CHIP_VA_WIDTH() <= 32 +__attribute__ ((packed, aligned(4))) +#endif +{ + HV_PhysAddr pa; /**< Client physical address of the buffer segment. */ + HV_PTE pte; /**< Page table entry describing the caching and location + override characteristics of the buffer segment. Some + drivers ignore this element and will require that + the NOCACHE flag be set on their requests. */ + __hv32 len; /**< Length of the buffer segment. */ +} HV_SGL; + +#define HV_SGL_MAXLEN 16 /**< Maximum number of entries in a scatter-gather + list */ + +/** Read data from a hypervisor device asynchronously. + * + * This service transfers data from a hypervisor device to a memory buffer. + * When the service returns, the read has been scheduled. When the read + * completes, an interrupt message will be delivered, and the buffer will + * not be further modified by the driver. + * + * The number of possible outstanding asynchronous requests is defined by + * each driver, but it is recommended that it be at least two requests + * per tile per device. + * + * No ordering is guaranteed between synchronous and asynchronous requests, + * even those issued on the same tile. + * + * The completion interrupt message could come directly, or via the downcall + * (intctrl1) method, depending on what the tile is doing when the read + * completes. Interrupts do not coalesce; one is delivered for each + * asynchronous I/O request. Note that it is possible for the requested + * interrupt to be delivered after this service is called but before it + * returns. + * + * Devices may choose to support both the synchronous and asynchronous read + * operations, only one of them, or neither of them. + * + * @param devhdl Device handle of the device to be read from. + * @param flags Flags (HV_DEV_xxx). + * @param sgl_len Number of elements in the scatter-gather list. + * @param sgl Scatter-gather list describing the memory to which data will be + * written. + * @param offset Driver-dependent offset. For a random-access device, this is + * often a byte offset from the beginning of the device; in other cases, + * like on a control device, it may have a different meaning. + * @param intarg Value which will be delivered as the intarg member of the + * eventual interrupt message; the intdata member will be set to the + * normal return value from the read request. + * @return Zero if the read was successfully scheduled; otherwise, a negative + * error code. Note that some drivers may choose to pre-validate + * their arguments, and may thus detect certain device error + * conditions at this time rather than when the completion notification + * occurs, but this is not required. + */ +int hv_dev_preada(int devhdl, __hv32 flags, __hv32 sgl_len, + HV_SGL sgl[/* sgl_len */], __hv64 offset, HV_IntArg intarg); + + +/** Write data to a hypervisor device asynchronously. + * + * This service transfers data from a memory buffer to a hypervisor + * device. When the service returns, the write has been scheduled. + * When the write completes, an interrupt message will be delivered, + * and the buffer may be overwritten by the client; the data may not + * necessarily have been conveyed to the actual hardware I/O interface. + * + * The number of possible outstanding asynchronous requests is defined by + * each driver, but it is recommended that it be at least two requests + * per tile per device. + * + * No ordering is guaranteed between synchronous and asynchronous requests, + * even those issued on the same tile. + * + * The completion interrupt message could come directly, or via the downcall + * (intctrl1) method, depending on what the tile is doing when the read + * completes. Interrupts do not coalesce; one is delivered for each + * asynchronous I/O request. Note that it is possible for the requested + * interrupt to be delivered after this service is called but before it + * returns. + * + * Devices may choose to support both the synchronous and asynchronous write + * operations, only one of them, or neither of them. + * + * @param devhdl Device handle of the device to be read from. + * @param flags Flags (HV_DEV_xxx). + * @param sgl_len Number of elements in the scatter-gather list. + * @param sgl Scatter-gather list describing the memory from which data will be + * read. + * @param offset Driver-dependent offset. For a random-access device, this is + * often a byte offset from the beginning of the device; in other cases, + * like on a control device, it may have a different meaning. + * @param intarg Value which will be delivered as the intarg member of the + * eventual interrupt message; the intdata member will be set to the + * normal return value from the write request. + * @return Zero if the write was successfully scheduled; otherwise, a negative + * error code. Note that some drivers may choose to pre-validate + * their arguments, and may thus detect certain device error + * conditions at this time rather than when the completion notification + * occurs, but this is not required. + */ +int hv_dev_pwritea(int devhdl, __hv32 flags, __hv32 sgl_len, + HV_SGL sgl[/* sgl_len */], __hv64 offset, HV_IntArg intarg); + + +/** Define a pair of tile and ASID to identify a user process context. */ +typedef struct +{ + /** X coordinate, relative to supervisor's top-left coordinate */ + unsigned int x:11; + + /** Y coordinate, relative to supervisor's top-left coordinate */ + unsigned int y:11; + + /** ASID of the process on this x,y tile */ + HV_ASID asid:10; +} HV_Remote_ASID; + +/** Flush cache and/or TLB state on remote tiles. + * + * @param cache_pa Client physical address to flush from cache (ignored if + * the length encoded in cache_control is zero, or if + * HV_FLUSH_EVICT_L2 is set, or if cache_cpumask is NULL). + * @param cache_control This argument allows you to specify a length of + * physical address space to flush (maximum HV_FLUSH_MAX_CACHE_LEN). + * You can "or" in HV_FLUSH_EVICT_L2 to flush the whole L2 cache. + * You can "or" in HV_FLUSH_EVICT_LI1 to flush the whole LII cache. + * HV_FLUSH_ALL flushes all caches. + * @param cache_cpumask Bitmask (in row-major order, supervisor-relative) of + * tile indices to perform cache flush on. The low bit of the first + * word corresponds to the tile at the upper left-hand corner of the + * supervisor's rectangle. If passed as a NULL pointer, equivalent + * to an empty bitmask. On chips which support hash-for-home caching, + * if passed as -1, equivalent to a mask containing tiles which could + * be doing hash-for-home caching. + * @param tlb_va Virtual address to flush from TLB (ignored if + * tlb_length is zero or tlb_cpumask is NULL). + * @param tlb_length Number of bytes of data to flush from the TLB. + * @param tlb_pgsize Page size to use for TLB flushes. + * tlb_va and tlb_length need not be aligned to this size. + * @param tlb_cpumask Bitmask for tlb flush, like cache_cpumask. + * If passed as a NULL pointer, equivalent to an empty bitmask. + * @param asids Pointer to an HV_Remote_ASID array of tile/ASID pairs to flush. + * @param asidcount Number of HV_Remote_ASID entries in asids[]. + * @return Zero for success, or else HV_EINVAL or HV_EFAULT for errors that + * are detected while parsing the arguments. + */ +int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control, + unsigned long* cache_cpumask, + HV_VirtAddr tlb_va, unsigned long tlb_length, + unsigned long tlb_pgsize, unsigned long* tlb_cpumask, + HV_Remote_ASID* asids, int asidcount); + +/** Include in cache_control to ensure a flush of the entire L2. */ +#define HV_FLUSH_EVICT_L2 (1UL << 31) + +/** Include in cache_control to ensure a flush of the entire L1I. */ +#define HV_FLUSH_EVICT_L1I (1UL << 30) + +/** Maximum legal size to use for the "length" component of cache_control. */ +#define HV_FLUSH_MAX_CACHE_LEN ((1UL << 30) - 1) + +/** Use for cache_control to ensure a flush of all caches. */ +#define HV_FLUSH_ALL -1UL + +#else /* __ASSEMBLER__ */ + +/** Include in cache_control to ensure a flush of the entire L2. */ +#define HV_FLUSH_EVICT_L2 (1 << 31) + +/** Include in cache_control to ensure a flush of the entire L1I. */ +#define HV_FLUSH_EVICT_L1I (1 << 30) + +/** Maximum legal size to use for the "length" component of cache_control. */ +#define HV_FLUSH_MAX_CACHE_LEN ((1 << 30) - 1) + +/** Use for cache_control to ensure a flush of all caches. */ +#define HV_FLUSH_ALL -1 + +#endif /* __ASSEMBLER__ */ + +#ifndef __ASSEMBLER__ + +/** Return a 64-bit value corresponding to the PTE if needed */ +#define hv_pte_val(pte) ((pte).val) + +/** Cast a 64-bit value to an HV_PTE */ +#define hv_pte(val) ((HV_PTE) { val }) + +#endif /* !__ASSEMBLER__ */ + + +/** Bits in the size of an HV_PTE */ +#define HV_LOG2_PTE_SIZE 3 + +/** Size of an HV_PTE */ +#define HV_PTE_SIZE (1 << HV_LOG2_PTE_SIZE) + + +/* Bits in HV_PTE's low word. */ +#define HV_PTE_INDEX_PRESENT 0 /**< PTE is valid */ +#define HV_PTE_INDEX_MIGRATING 1 /**< Page is migrating */ +#define HV_PTE_INDEX_CLIENT0 2 /**< Page client state 0 */ +#define HV_PTE_INDEX_CLIENT1 3 /**< Page client state 1 */ +#define HV_PTE_INDEX_NC 4 /**< L1$/L2$ incoherent with L3$ */ +#define HV_PTE_INDEX_NO_ALLOC_L1 5 /**< Page is uncached in local L1$ */ +#define HV_PTE_INDEX_NO_ALLOC_L2 6 /**< Page is uncached in local L2$ */ +#define HV_PTE_INDEX_CACHED_PRIORITY 7 /**< Page is priority cached */ +#define HV_PTE_INDEX_PAGE 8 /**< PTE describes a page */ +#define HV_PTE_INDEX_GLOBAL 9 /**< Page is global */ +#define HV_PTE_INDEX_USER 10 /**< Page is user-accessible */ +#define HV_PTE_INDEX_ACCESSED 11 /**< Page has been accessed */ +#define HV_PTE_INDEX_DIRTY 12 /**< Page has been written */ + /* Bits 13-15 are reserved for + future use. */ +#define HV_PTE_INDEX_MODE 16 /**< Page mode; see HV_PTE_MODE_xxx */ +#define HV_PTE_MODE_BITS 3 /**< Number of bits in mode */ + /* Bit 19 is reserved for + future use. */ +#define HV_PTE_INDEX_LOTAR 20 /**< Page's LOTAR; must be high bits + of word */ +#define HV_PTE_LOTAR_BITS 12 /**< Number of bits in a LOTAR */ + +/* Bits in HV_PTE's high word. */ +#define HV_PTE_INDEX_READABLE 32 /**< Page is readable */ +#define HV_PTE_INDEX_WRITABLE 33 /**< Page is writable */ +#define HV_PTE_INDEX_EXECUTABLE 34 /**< Page is executable */ +#define HV_PTE_INDEX_PTFN 35 /**< Page's PTFN; must be high bits + of word */ +#define HV_PTE_PTFN_BITS 29 /**< Number of bits in a PTFN */ + +/** Position of the PFN field within the PTE (subset of the PTFN). */ +#define HV_PTE_INDEX_PFN (HV_PTE_INDEX_PTFN + (HV_LOG2_PAGE_SIZE_SMALL - \ + HV_LOG2_PAGE_TABLE_ALIGN)) + +/** Length of the PFN field within the PTE (subset of the PTFN). */ +#define HV_PTE_INDEX_PFN_BITS (HV_PTE_INDEX_PTFN_BITS - \ + (HV_LOG2_PAGE_SIZE_SMALL - \ + HV_LOG2_PAGE_TABLE_ALIGN)) + +/* + * Legal values for the PTE's mode field + */ +/** Data is not resident in any caches; loads and stores access memory + * directly. + */ +#define HV_PTE_MODE_UNCACHED 1 + +/** Data is resident in the tile's local L1 and/or L2 caches; if a load + * or store misses there, it goes to memory. + * + * The copy in the local L1$/L2$ is not invalidated when the copy in + * memory is changed. + */ +#define HV_PTE_MODE_CACHE_NO_L3 2 + +/** Data is resident in the tile's local L1 and/or L2 caches. If a load + * or store misses there, it goes to an L3 cache in a designated tile; + * if it misses there, it goes to memory. + * + * If the NC bit is not set, the copy in the local L1$/L2$ is invalidated + * when the copy in the remote L3$ is changed. Otherwise, such + * invalidation will not occur. + * + * Chips for which CHIP_HAS_COHERENT_LOCAL_CACHE() is 0 do not support + * invalidation from an L3$ to another tile's L1$/L2$. If the NC bit is + * clear on such a chip, no copy is kept in the local L1$/L2$ in this mode. + */ +#define HV_PTE_MODE_CACHE_TILE_L3 3 + +/** Data is resident in the tile's local L1 and/or L2 caches. If a load + * or store misses there, it goes to an L3 cache in one of a set of + * designated tiles; if it misses there, it goes to memory. Which tile + * is chosen from the set depends upon a hash function applied to the + * physical address. This mode is not supported on chips for which + * CHIP_HAS_CBOX_HOME_MAP() is 0. + * + * If the NC bit is not set, the copy in the local L1$/L2$ is invalidated + * when the copy in the remote L3$ is changed. Otherwise, such + * invalidation will not occur. + * + * Chips for which CHIP_HAS_COHERENT_LOCAL_CACHE() is 0 do not support + * invalidation from an L3$ to another tile's L1$/L2$. If the NC bit is + * clear on such a chip, no copy is kept in the local L1$/L2$ in this mode. + */ +#define HV_PTE_MODE_CACHE_HASH_L3 4 + +/** Data is not resident in memory; accesses are instead made to an I/O + * device, whose tile coordinates are given by the PTE's LOTAR field. + * This mode is only supported on chips for which CHIP_HAS_MMIO() is 1. + * The EXECUTABLE bit may not be set in an MMIO PTE. + */ +#define HV_PTE_MODE_MMIO 5 + + +/* C wants 1ULL so it is typed as __hv64, but the assembler needs just numbers. + * The assembler can't handle shifts greater than 31, but treats them + * as shifts mod 32, so assembler code must be aware of which word + * the bit belongs in when using these macros. + */ +#ifdef __ASSEMBLER__ +#define __HV_PTE_ONE 1 /**< One, for assembler */ +#else +#define __HV_PTE_ONE 1ULL /**< One, for C */ +#endif + +/** Is this PTE present? + * + * If this bit is set, this PTE represents a valid translation or level-2 + * page table pointer. Otherwise, the page table does not contain a + * translation for the subject virtual pages. + * + * If this bit is not set, the other bits in the PTE are not + * interpreted by the hypervisor, and may contain any value. + */ +#define HV_PTE_PRESENT (__HV_PTE_ONE << HV_PTE_INDEX_PRESENT) + +/** Does this PTE map a page? + * + * If this bit is set in the level-1 page table, the entry should be + * interpreted as a level-2 page table entry mapping a large page. + * + * This bit should not be modified by the client while PRESENT is set, as + * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits. + * + * In a level-2 page table, this bit is ignored and must be zero. + */ +#define HV_PTE_PAGE (__HV_PTE_ONE << HV_PTE_INDEX_PAGE) + +/** Is this a global (non-ASID) mapping? + * + * If this bit is set, the translations established by this PTE will + * not be flushed from the TLB by the hv_flush_asid() service; they + * will be flushed by the hv_flush_page() or hv_flush_pages() services. + * + * Setting this bit for translations which are identical in all page + * tables (for instance, code and data belonging to a client OS) can + * be very beneficial, as it will reduce the number of TLB misses. + * Note that, while it is not an error which will be detected by the + * hypervisor, it is an extremely bad idea to set this bit for + * translations which are _not_ identical in all page tables. + * + * This bit should not be modified by the client while PRESENT is set, as + * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits. + * + * This bit is ignored in level-1 PTEs unless the Page bit is set. + */ +#define HV_PTE_GLOBAL (__HV_PTE_ONE << HV_PTE_INDEX_GLOBAL) + +/** Is this mapping accessible to users? + * + * If this bit is set, code running at any PL will be permitted to + * access the virtual addresses mapped by this PTE. Otherwise, only + * code running at PL 1 or above will be allowed to do so. + * + * This bit should not be modified by the client while PRESENT is set, as + * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits. + * + * This bit is ignored in level-1 PTEs unless the Page bit is set. + */ +#define HV_PTE_USER (__HV_PTE_ONE << HV_PTE_INDEX_USER) + +/** Has this mapping been accessed? + * + * This bit is set by the hypervisor when the memory described by the + * translation is accessed for the first time. It is never cleared by + * the hypervisor, but may be cleared by the client. After the bit + * has been cleared, subsequent references are not guaranteed to set + * it again until the translation has been flushed from the TLB. + * + * This bit is ignored in level-1 PTEs unless the Page bit is set. + */ +#define HV_PTE_ACCESSED (__HV_PTE_ONE << HV_PTE_INDEX_ACCESSED) + +/** Is this mapping dirty? + * + * This bit is set by the hypervisor when the memory described by the + * translation is written for the first time. It is never cleared by + * the hypervisor, but may be cleared by the client. After the bit + * has been cleared, subsequent references are not guaranteed to set + * it again until the translation has been flushed from the TLB. + * + * This bit is ignored in level-1 PTEs unless the Page bit is set. + */ +#define HV_PTE_DIRTY (__HV_PTE_ONE << HV_PTE_INDEX_DIRTY) + +/** Migrating bit in PTE. + * + * This bit is guaranteed not to be inspected or modified by the + * hypervisor. The name is indicative of the suggested use by the client + * to tag pages whose L3 cache is being migrated from one cpu to another. + */ +#define HV_PTE_MIGRATING (__HV_PTE_ONE << HV_PTE_INDEX_MIGRATING) + +/** Client-private bit in PTE. + * + * This bit is guaranteed not to be inspected or modified by the + * hypervisor. + */ +#define HV_PTE_CLIENT0 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT0) + +/** Client-private bit in PTE. + * + * This bit is guaranteed not to be inspected or modified by the + * hypervisor. + */ +#define HV_PTE_CLIENT1 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT1) + +/** Non-coherent (NC) bit in PTE. + * + * If this bit is set, the mapping that is set up will be non-coherent + * (also known as non-inclusive). This means that changes to the L3 + * cache will not cause a local copy to be invalidated. It is generally + * recommended only for read-only mappings. + * + * In level-1 PTEs, if the Page bit is clear, this bit determines how the + * level-2 page table is accessed. + */ +#define HV_PTE_NC (__HV_PTE_ONE << HV_PTE_INDEX_NC) + +/** Is this page prevented from filling the L1$? + * + * If this bit is set, the page described by the PTE will not be cached + * the local cpu's L1 cache. + * + * If CHIP_HAS_NC_AND_NOALLOC_BITS() is not true in <chip.h> for this chip, + * it is illegal to use this attribute, and may cause client termination. + * + * In level-1 PTEs, if the Page bit is clear, this bit + * determines how the level-2 page table is accessed. + */ +#define HV_PTE_NO_ALLOC_L1 (__HV_PTE_ONE << HV_PTE_INDEX_NO_ALLOC_L1) + +/** Is this page prevented from filling the L2$? + * + * If this bit is set, the page described by the PTE will not be cached + * the local cpu's L2 cache. + * + * If CHIP_HAS_NC_AND_NOALLOC_BITS() is not true in <chip.h> for this chip, + * it is illegal to use this attribute, and may cause client termination. + * + * In level-1 PTEs, if the Page bit is clear, this bit determines how the + * level-2 page table is accessed. + */ +#define HV_PTE_NO_ALLOC_L2 (__HV_PTE_ONE << HV_PTE_INDEX_NO_ALLOC_L2) + +/** Is this a priority page? + * + * If this bit is set, the page described by the PTE will be given + * priority in the cache. Normally this translates into allowing the + * page to use only the "red" half of the cache. The client may wish to + * then use the hv_set_caching service to specify that other pages which + * alias this page will use only the "black" half of the cache. + * + * If the Cached Priority bit is clear, the hypervisor uses the + * current hv_set_caching() value to choose how to cache the page. + * + * It is illegal to set the Cached Priority bit if the Non-Cached bit + * is set and the Cached Remotely bit is clear, i.e. if requests to + * the page map directly to memory. + * + * This bit is ignored in level-1 PTEs unless the Page bit is set. + */ +#define HV_PTE_CACHED_PRIORITY (__HV_PTE_ONE << \ + HV_PTE_INDEX_CACHED_PRIORITY) + +/** Is this a readable mapping? + * + * If this bit is set, code will be permitted to read from (e.g., + * issue load instructions against) the virtual addresses mapped by + * this PTE. + * + * It is illegal for this bit to be clear if the Writable bit is set. + * + * This bit is ignored in level-1 PTEs unless the Page bit is set. + */ +#define HV_PTE_READABLE (__HV_PTE_ONE << HV_PTE_INDEX_READABLE) + +/** Is this a writable mapping? + * + * If this bit is set, code will be permitted to write to (e.g., issue + * store instructions against) the virtual addresses mapped by this + * PTE. + * + * This bit is ignored in level-1 PTEs unless the Page bit is set. + */ +#define HV_PTE_WRITABLE (__HV_PTE_ONE << HV_PTE_INDEX_WRITABLE) + +/** Is this an executable mapping? + * + * If this bit is set, code will be permitted to execute from + * (e.g., jump to) the virtual addresses mapped by this PTE. + * + * This bit applies to any processor on the tile, if there are more + * than one. + * + * This bit is ignored in level-1 PTEs unless the Page bit is set. + */ +#define HV_PTE_EXECUTABLE (__HV_PTE_ONE << HV_PTE_INDEX_EXECUTABLE) + +/** The width of a LOTAR's x or y bitfield. */ +#define HV_LOTAR_WIDTH 11 + +/** Converts an x,y pair to a LOTAR value. */ +#define HV_XY_TO_LOTAR(x, y) ((HV_LOTAR)(((x) << HV_LOTAR_WIDTH) | (y))) + +/** Extracts the X component of a lotar. */ +#define HV_LOTAR_X(lotar) ((lotar) >> HV_LOTAR_WIDTH) + +/** Extracts the Y component of a lotar. */ +#define HV_LOTAR_Y(lotar) ((lotar) & ((1 << HV_LOTAR_WIDTH) - 1)) + +#ifndef __ASSEMBLER__ + +/** Define accessor functions for a PTE bit. */ +#define _HV_BIT(name, bit) \ +static __inline int \ +hv_pte_get_##name(HV_PTE pte) \ +{ \ + return (pte.val >> HV_PTE_INDEX_##bit) & 1; \ +} \ + \ +static __inline HV_PTE \ +hv_pte_set_##name(HV_PTE pte) \ +{ \ + pte.val |= 1ULL << HV_PTE_INDEX_##bit; \ + return pte; \ +} \ + \ +static __inline HV_PTE \ +hv_pte_clear_##name(HV_PTE pte) \ +{ \ + pte.val &= ~(1ULL << HV_PTE_INDEX_##bit); \ + return pte; \ +} + +/* Generate accessors to get, set, and clear various PTE flags. + */ +_HV_BIT(present, PRESENT) +_HV_BIT(page, PAGE) +_HV_BIT(client0, CLIENT0) +_HV_BIT(client1, CLIENT1) +_HV_BIT(migrating, MIGRATING) +_HV_BIT(nc, NC) +_HV_BIT(readable, READABLE) +_HV_BIT(writable, WRITABLE) +_HV_BIT(executable, EXECUTABLE) +_HV_BIT(accessed, ACCESSED) +_HV_BIT(dirty, DIRTY) +_HV_BIT(no_alloc_l1, NO_ALLOC_L1) +_HV_BIT(no_alloc_l2, NO_ALLOC_L2) +_HV_BIT(cached_priority, CACHED_PRIORITY) +_HV_BIT(global, GLOBAL) +_HV_BIT(user, USER) + +#undef _HV_BIT + +/** Get the page mode from the PTE. + * + * This field generally determines whether and how accesses to the page + * are cached; the HV_PTE_MODE_xxx symbols define the legal values for the + * page mode. The NC, NO_ALLOC_L1, and NO_ALLOC_L2 bits modify this + * general policy. + */ +static __inline unsigned int +hv_pte_get_mode(const HV_PTE pte) +{ + return (((__hv32) pte.val) >> HV_PTE_INDEX_MODE) & + ((1 << HV_PTE_MODE_BITS) - 1); +} + +/** Set the page mode into a PTE. See hv_pte_get_mode. */ +static __inline HV_PTE +hv_pte_set_mode(HV_PTE pte, unsigned int val) +{ + pte.val &= ~(((1ULL << HV_PTE_MODE_BITS) - 1) << HV_PTE_INDEX_MODE); + pte.val |= val << HV_PTE_INDEX_MODE; + return pte; +} + +/** Get the page frame number from the PTE. + * + * This field contains the upper bits of the CPA (client physical + * address) of the target page; the complete CPA is this field with + * HV_LOG2_PAGE_SIZE_SMALL zero bits appended to it. + * + * For PTEs in a level-1 page table where the Page bit is set, the + * CPA must be aligned modulo the large page size. + */ +static __inline unsigned int +hv_pte_get_pfn(const HV_PTE pte) +{ + return pte.val >> HV_PTE_INDEX_PFN; +} + + +/** Set the page frame number into a PTE. See hv_pte_get_pfn. */ +static __inline HV_PTE +hv_pte_set_pfn(HV_PTE pte, unsigned int val) +{ + /* + * Note that the use of "PTFN" in the next line is intentional; we + * don't want any garbage lower bits left in that field. + */ + pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS) - 1) << HV_PTE_INDEX_PTFN); + pte.val |= (__hv64) val << HV_PTE_INDEX_PFN; + return pte; +} + +/** Get the page table frame number from the PTE. + * + * This field contains the upper bits of the CPA (client physical + * address) of the target page table; the complete CPA is this field with + * with HV_PAGE_TABLE_ALIGN zero bits appended to it. + * + * For PTEs in a level-1 page table when the Page bit is not set, the + * CPA must be aligned modulo the sticter of HV_PAGE_TABLE_ALIGN and + * the level-2 page table size. + */ +static __inline unsigned long +hv_pte_get_ptfn(const HV_PTE pte) +{ + return pte.val >> HV_PTE_INDEX_PTFN; +} + + +/** Set the page table frame number into a PTE. See hv_pte_get_ptfn. */ +static __inline HV_PTE +hv_pte_set_ptfn(HV_PTE pte, unsigned long val) +{ + pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS)-1) << HV_PTE_INDEX_PTFN); + pte.val |= (__hv64) val << HV_PTE_INDEX_PTFN; + return pte; +} + + +/** Get the remote tile caching this page. + * + * Specifies the remote tile which is providing the L3 cache for this page. + * + * This field is ignored unless the page mode is HV_PTE_MODE_CACHE_TILE_L3. + * + * In level-1 PTEs, if the Page bit is clear, this field determines how the + * level-2 page table is accessed. + */ +static __inline unsigned int +hv_pte_get_lotar(const HV_PTE pte) +{ + unsigned int lotar = ((__hv32) pte.val) >> HV_PTE_INDEX_LOTAR; + + return HV_XY_TO_LOTAR( (lotar >> (HV_PTE_LOTAR_BITS / 2)), + (lotar & ((1 << (HV_PTE_LOTAR_BITS / 2)) - 1)) ); +} + + +/** Set the remote tile caching a page into a PTE. See hv_pte_get_lotar. */ +static __inline HV_PTE +hv_pte_set_lotar(HV_PTE pte, unsigned int val) +{ + unsigned int x = HV_LOTAR_X(val); + unsigned int y = HV_LOTAR_Y(val); + + pte.val &= ~(((1ULL << HV_PTE_LOTAR_BITS)-1) << HV_PTE_INDEX_LOTAR); + pte.val |= (x << (HV_PTE_INDEX_LOTAR + HV_PTE_LOTAR_BITS / 2)) | + (y << HV_PTE_INDEX_LOTAR); + return pte; +} + +#endif /* !__ASSEMBLER__ */ + +/** Converts a client physical address to a pfn. */ +#define HV_CPA_TO_PFN(p) ((p) >> HV_LOG2_PAGE_SIZE_SMALL) + +/** Converts a pfn to a client physical address. */ +#define HV_PFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_SIZE_SMALL) + +/** Converts a client physical address to a ptfn. */ +#define HV_CPA_TO_PTFN(p) ((p) >> HV_LOG2_PAGE_TABLE_ALIGN) + +/** Converts a ptfn to a client physical address. */ +#define HV_PTFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_TABLE_ALIGN) + +/** Converts a ptfn to a pfn. */ +#define HV_PTFN_TO_PFN(p) \ + ((p) >> (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN)) + +/** Converts a pfn to a ptfn. */ +#define HV_PFN_TO_PTFN(p) \ + ((p) << (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN)) + +#if CHIP_VA_WIDTH() > 32 + +/** Log number of HV_PTE entries in L0 page table */ +#define HV_LOG2_L0_ENTRIES (CHIP_VA_WIDTH() - HV_LOG2_L1_SPAN) + +/** Number of HV_PTE entries in L0 page table */ +#define HV_L0_ENTRIES (1 << HV_LOG2_L0_ENTRIES) + +/** Log size of L0 page table in bytes */ +#define HV_LOG2_L0_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L0_ENTRIES) + +/** Size of L0 page table in bytes */ +#define HV_L0_SIZE (1 << HV_LOG2_L0_SIZE) + +#ifdef __ASSEMBLER__ + +/** Index in L0 for a specific VA */ +#define HV_L0_INDEX(va) \ + (((va) >> HV_LOG2_L1_SPAN) & (HV_L0_ENTRIES - 1)) + +#else + +/** Index in L1 for a specific VA */ +#define HV_L0_INDEX(va) \ + (((HV_VirtAddr)(va) >> HV_LOG2_L1_SPAN) & (HV_L0_ENTRIES - 1)) + +#endif + +#endif /* CHIP_VA_WIDTH() > 32 */ + +/** Log number of HV_PTE entries in L1 page table */ +#define HV_LOG2_L1_ENTRIES (HV_LOG2_L1_SPAN - HV_LOG2_PAGE_SIZE_LARGE) + +/** Number of HV_PTE entries in L1 page table */ +#define HV_L1_ENTRIES (1 << HV_LOG2_L1_ENTRIES) + +/** Log size of L1 page table in bytes */ +#define HV_LOG2_L1_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L1_ENTRIES) + +/** Size of L1 page table in bytes */ +#define HV_L1_SIZE (1 << HV_LOG2_L1_SIZE) + +/** Log number of HV_PTE entries in level-2 page table */ +#define HV_LOG2_L2_ENTRIES (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL) + +/** Number of HV_PTE entries in level-2 page table */ +#define HV_L2_ENTRIES (1 << HV_LOG2_L2_ENTRIES) + +/** Log size of level-2 page table in bytes */ +#define HV_LOG2_L2_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L2_ENTRIES) + +/** Size of level-2 page table in bytes */ +#define HV_L2_SIZE (1 << HV_LOG2_L2_SIZE) + +#ifdef __ASSEMBLER__ + +#if CHIP_VA_WIDTH() > 32 + +/** Index in L1 for a specific VA */ +#define HV_L1_INDEX(va) \ + (((va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1)) + +#else /* CHIP_VA_WIDTH() > 32 */ + +/** Index in L1 for a specific VA */ +#define HV_L1_INDEX(va) \ + (((va) >> HV_LOG2_PAGE_SIZE_LARGE)) + +#endif /* CHIP_VA_WIDTH() > 32 */ + +/** Index in level-2 page table for a specific VA */ +#define HV_L2_INDEX(va) \ + (((va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1)) + +#else /* __ASSEMBLER __ */ + +#if CHIP_VA_WIDTH() > 32 + +/** Index in L1 for a specific VA */ +#define HV_L1_INDEX(va) \ + (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1)) + +#else /* CHIP_VA_WIDTH() > 32 */ + +/** Index in L1 for a specific VA */ +#define HV_L1_INDEX(va) \ + (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE)) + +#endif /* CHIP_VA_WIDTH() > 32 */ + +/** Index in level-2 page table for a specific VA */ +#define HV_L2_INDEX(va) \ + (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1)) + +#endif /* __ASSEMBLER __ */ + +#endif /* _TILE_HV_H */ diff --git a/arch/tile/include/hv/syscall_public.h b/arch/tile/include/hv/syscall_public.h new file mode 100644 index 00000000000..9cc0837e69f --- /dev/null +++ b/arch/tile/include/hv/syscall_public.h @@ -0,0 +1,42 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * @file syscall.h + * Indices for the hypervisor system calls that are intended to be called + * directly, rather than only through hypervisor-generated "glue" code. + */ + +#ifndef _SYS_HV_INCLUDE_SYSCALL_PUBLIC_H +#define _SYS_HV_INCLUDE_SYSCALL_PUBLIC_H + +/** Fast syscall flag bit location. When this bit is set, the hypervisor + * handles the syscall specially. + */ +#define HV_SYS_FAST_SHIFT 14 + +/** Fast syscall flag bit mask. */ +#define HV_SYS_FAST_MASK (1 << HV_SYS_FAST_SHIFT) + +/** Bit location for flagging fast syscalls that can be called from PL0. */ +#define HV_SYS_FAST_PLO_SHIFT 13 + +/** Fast syscall allowing PL0 bit mask. */ +#define HV_SYS_FAST_PL0_MASK (1 << HV_SYS_FAST_PLO_SHIFT) + +/** Perform an MF that waits for all victims to reach DRAM. */ +#define HV_SYS_fence_incoherent (51 | HV_SYS_FAST_MASK \ + | HV_SYS_FAST_PL0_MASK) + +#endif /* !_SYS_HV_INCLUDE_SYSCALL_PUBLIC_H */ |