diff options
Diffstat (limited to 'arch/tile/kernel')
| -rw-r--r-- | arch/tile/kernel/Makefile | 5 | ||||
| -rw-r--r-- | arch/tile/kernel/backtrace.c | 9 | ||||
| -rw-r--r-- | arch/tile/kernel/entry.S | 14 | ||||
| -rw-r--r-- | arch/tile/kernel/pci-dma.c | 536 | ||||
| -rw-r--r-- | arch/tile/kernel/pci.c | 17 | ||||
| -rw-r--r-- | arch/tile/kernel/pci_gx.c | 1543 | ||||
| -rw-r--r-- | arch/tile/kernel/setup.c | 46 | ||||
| -rw-r--r-- | arch/tile/kernel/smpboot.c | 10 | ||||
| -rw-r--r-- | arch/tile/kernel/usb.c | 69 |
9 files changed, 2093 insertions, 156 deletions
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile index 5de99248d8d..5334be8e253 100644 --- a/arch/tile/kernel/Makefile +++ b/arch/tile/kernel/Makefile @@ -14,4 +14,9 @@ obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel_$(BITS).o +ifdef CONFIG_TILEGX +obj-$(CONFIG_PCI) += pci_gx.o +else obj-$(CONFIG_PCI) += pci.o +endif +obj-$(CONFIG_TILE_USB) += usb.o diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c index 9092ce8aa6b..f8b74ca83b9 100644 --- a/arch/tile/kernel/backtrace.c +++ b/arch/tile/kernel/backtrace.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/string.h> +#include <asm/byteorder.h> #include <asm/backtrace.h> #include <asm/tile-desc.h> #include <arch/abi.h> @@ -336,8 +337,12 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location, bytes_to_prefetch / sizeof(tile_bundle_bits); } - /* Decode the next bundle. */ - bundle.bits = prefetched_bundles[next_bundle++]; + /* + * Decode the next bundle. + * TILE always stores instruction bundles in little-endian + * mode, even when the chip is running in big-endian mode. + */ + bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]); bundle.num_insns = parse_insn_tile(bundle.bits, pc, bundle.insns); num_info_ops = bt_get_info_ops(&bundle, info_operands); diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S index 133c4b56a99..c31637baff2 100644 --- a/arch/tile/kernel/entry.S +++ b/arch/tile/kernel/entry.S @@ -68,20 +68,6 @@ STD_ENTRY(KBacktraceIterator_init_current) jrp lr /* keep backtracer happy */ STD_ENDPROC(KBacktraceIterator_init_current) -/* - * Reset our stack to r1/r2 (sp and ksp0+cpu respectively), then - * free the old stack (passed in r0) and re-invoke cpu_idle(). - * We update sp and ksp0 simultaneously to avoid backtracer warnings. - */ -STD_ENTRY(cpu_idle_on_new_stack) - { - move sp, r1 - mtspr SPR_SYSTEM_SAVE_K_0, r2 - } - jal free_thread_info - j cpu_idle - STD_ENDPROC(cpu_idle_on_new_stack) - /* Loop forever on a nap during SMP boot. */ STD_ENTRY(smp_nap) nap diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index b3ed19f8779..b9fe80ec108 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -14,6 +14,7 @@ #include <linux/mm.h> #include <linux/dma-mapping.h> +#include <linux/swiotlb.h> #include <linux/vmalloc.h> #include <linux/export.h> #include <asm/tlbflush.h> @@ -22,13 +23,18 @@ /* Generic DMA mapping functions: */ /* - * Allocate what Linux calls "coherent" memory, which for us just - * means uncached. + * Allocate what Linux calls "coherent" memory. On TILEPro this is + * uncached memory; on TILE-Gx it is hash-for-home memory. */ -void *dma_alloc_coherent(struct device *dev, - size_t size, - dma_addr_t *dma_handle, - gfp_t gfp) +#ifdef __tilepro__ +#define PAGE_HOME_DMA PAGE_HOME_UNCACHED +#else +#define PAGE_HOME_DMA PAGE_HOME_HASH +#endif + +static void *tile_dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp, + struct dma_attrs *attrs) { u64 dma_mask = dev->coherent_dma_mask ?: DMA_BIT_MASK(32); int node = dev_to_node(dev); @@ -39,39 +45,42 @@ void *dma_alloc_coherent(struct device *dev, gfp |= __GFP_ZERO; /* - * By forcing NUMA node 0 for 32-bit masks we ensure that the - * high 32 bits of the resulting PA will be zero. If the mask - * size is, e.g., 24, we may still not be able to guarantee a - * suitable memory address, in which case we will return NULL. - * But such devices are uncommon. + * If the mask specifies that the memory be in the first 4 GB, then + * we force the allocation to come from the DMA zone. We also + * force the node to 0 since that's the only node where the DMA + * zone isn't empty. If the mask size is smaller than 32 bits, we + * may still not be able to guarantee a suitable memory address, in + * which case we will return NULL. But such devices are uncommon. */ - if (dma_mask <= DMA_BIT_MASK(32)) + if (dma_mask <= DMA_BIT_MASK(32)) { + gfp |= GFP_DMA; node = 0; + } - pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_UNCACHED); + pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_DMA); if (pg == NULL) return NULL; addr = page_to_phys(pg); if (addr + size > dma_mask) { - homecache_free_pages(addr, order); + __homecache_free_pages(pg, order); return NULL; } *dma_handle = addr; + return page_address(pg); } -EXPORT_SYMBOL(dma_alloc_coherent); /* - * Free memory that was allocated with dma_alloc_coherent. + * Free memory that was allocated with tile_dma_alloc_coherent. */ -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) +static void tile_dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) { homecache_free_pages((unsigned long)vaddr, get_order(size)); } -EXPORT_SYMBOL(dma_free_coherent); /* * The map routines "map" the specified address range for DMA @@ -87,52 +96,285 @@ EXPORT_SYMBOL(dma_free_coherent); * can count on nothing having been touched. */ -/* Flush a PA range from cache page by page. */ -static void __dma_map_pa_range(dma_addr_t dma_addr, size_t size) +/* Set up a single page for DMA access. */ +static void __dma_prep_page(struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction) +{ + /* + * Flush the page from cache if necessary. + * On tilegx, data is delivered to hash-for-home L3; on tilepro, + * data is delivered direct to memory. + * + * NOTE: If we were just doing DMA_TO_DEVICE we could optimize + * this to be a "flush" not a "finv" and keep some of the + * state in cache across the DMA operation, but it doesn't seem + * worth creating the necessary flush_buffer_xxx() infrastructure. + */ + int home = page_home(page); + switch (home) { + case PAGE_HOME_HASH: +#ifdef __tilegx__ + return; +#endif + break; + case PAGE_HOME_UNCACHED: +#ifdef __tilepro__ + return; +#endif + break; + case PAGE_HOME_IMMUTABLE: + /* Should be going to the device only. */ + BUG_ON(direction == DMA_FROM_DEVICE || + direction == DMA_BIDIRECTIONAL); + return; + case PAGE_HOME_INCOHERENT: + /* Incoherent anyway, so no need to work hard here. */ + return; + default: + BUG_ON(home < 0 || home >= NR_CPUS); + break; + } + homecache_finv_page(page); + +#ifdef DEBUG_ALIGNMENT + /* Warn if the region isn't cacheline aligned. */ + if (offset & (L2_CACHE_BYTES - 1) || (size & (L2_CACHE_BYTES - 1))) + pr_warn("Unaligned DMA to non-hfh memory: PA %#llx/%#lx\n", + PFN_PHYS(page_to_pfn(page)) + offset, size); +#endif +} + +/* Make the page ready to be read by the core. */ +static void __dma_complete_page(struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction) +{ +#ifdef __tilegx__ + switch (page_home(page)) { + case PAGE_HOME_HASH: + /* I/O device delivered data the way the cpu wanted it. */ + break; + case PAGE_HOME_INCOHERENT: + /* Incoherent anyway, so no need to work hard here. */ + break; + case PAGE_HOME_IMMUTABLE: + /* Extra read-only copies are not a problem. */ + break; + default: + /* Flush the bogus hash-for-home I/O entries to memory. */ + homecache_finv_map_page(page, PAGE_HOME_HASH); + break; + } +#endif +} + +static void __dma_prep_pa_range(dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) { struct page *page = pfn_to_page(PFN_DOWN(dma_addr)); - size_t bytesleft = PAGE_SIZE - (dma_addr & (PAGE_SIZE - 1)); + unsigned long offset = dma_addr & (PAGE_SIZE - 1); + size_t bytes = min(size, (size_t)(PAGE_SIZE - offset)); + + while (size != 0) { + __dma_prep_page(page, offset, bytes, direction); + size -= bytes; + ++page; + offset = 0; + bytes = min((size_t)PAGE_SIZE, size); + } +} - while ((ssize_t)size > 0) { - /* Flush the page. */ - homecache_flush_cache(page++, 0); +static void __dma_complete_pa_range(dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + struct page *page = pfn_to_page(PFN_DOWN(dma_addr)); + unsigned long offset = dma_addr & (PAGE_SIZE - 1); + size_t bytes = min(size, (size_t)(PAGE_SIZE - offset)); + + while (size != 0) { + __dma_complete_page(page, offset, bytes, direction); + size -= bytes; + ++page; + offset = 0; + bytes = min((size_t)PAGE_SIZE, size); + } +} + +static int tile_dma_map_sg(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct scatterlist *sg; + int i; + + BUG_ON(!valid_dma_direction(direction)); + + WARN_ON(nents == 0 || sglist->length == 0); - /* Figure out if we need to continue on the next page. */ - size -= bytesleft; - bytesleft = PAGE_SIZE; + for_each_sg(sglist, sg, nents, i) { + sg->dma_address = sg_phys(sg); + __dma_prep_pa_range(sg->dma_address, sg->length, direction); +#ifdef CONFIG_NEED_SG_DMA_LENGTH + sg->dma_length = sg->length; +#endif } + + return nents; } -/* - * dma_map_single can be passed any memory address, and there appear - * to be no alignment constraints. - * - * There is a chance that the start of the buffer will share a cache - * line with some other data that has been touched in the meantime. - */ -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) +static void tile_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct scatterlist *sg; + int i; + + BUG_ON(!valid_dma_direction(direction)); + for_each_sg(sglist, sg, nents, i) { + sg->dma_address = sg_phys(sg); + __dma_complete_pa_range(sg->dma_address, sg->length, + direction); + } +} + +static dma_addr_t tile_dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { - dma_addr_t dma_addr = __pa(ptr); + BUG_ON(!valid_dma_direction(direction)); + + BUG_ON(offset + size > PAGE_SIZE); + __dma_prep_page(page, offset, size, direction); + return page_to_pa(page) + offset; +} + +static void tile_dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ BUG_ON(!valid_dma_direction(direction)); - WARN_ON(size == 0); - __dma_map_pa_range(dma_addr, size); + __dma_complete_page(pfn_to_page(PFN_DOWN(dma_address)), + dma_address & PAGE_OFFSET, size, direction); +} - return dma_addr; +static void tile_dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction direction) +{ + BUG_ON(!valid_dma_direction(direction)); + + __dma_complete_pa_range(dma_handle, size, direction); +} + +static void tile_dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + __dma_prep_pa_range(dma_handle, size, direction); } -EXPORT_SYMBOL(dma_map_single); -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) +static void tile_dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sglist, int nelems, + enum dma_data_direction direction) { + struct scatterlist *sg; + int i; + + BUG_ON(!valid_dma_direction(direction)); + WARN_ON(nelems == 0 || sglist->length == 0); + + for_each_sg(sglist, sg, nelems, i) { + dma_sync_single_for_cpu(dev, sg->dma_address, + sg_dma_len(sg), direction); + } +} + +static void tile_dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sglist, int nelems, + enum dma_data_direction direction) +{ + struct scatterlist *sg; + int i; + BUG_ON(!valid_dma_direction(direction)); + WARN_ON(nelems == 0 || sglist->length == 0); + + for_each_sg(sglist, sg, nelems, i) { + dma_sync_single_for_device(dev, sg->dma_address, + sg_dma_len(sg), direction); + } +} + +static inline int +tile_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +static inline int +tile_dma_supported(struct device *dev, u64 mask) +{ + return 1; +} + +static struct dma_map_ops tile_default_dma_map_ops = { + .alloc = tile_dma_alloc_coherent, + .free = tile_dma_free_coherent, + .map_page = tile_dma_map_page, + .unmap_page = tile_dma_unmap_page, + .map_sg = tile_dma_map_sg, + .unmap_sg = tile_dma_unmap_sg, + .sync_single_for_cpu = tile_dma_sync_single_for_cpu, + .sync_single_for_device = tile_dma_sync_single_for_device, + .sync_sg_for_cpu = tile_dma_sync_sg_for_cpu, + .sync_sg_for_device = tile_dma_sync_sg_for_device, + .mapping_error = tile_dma_mapping_error, + .dma_supported = tile_dma_supported +}; + +struct dma_map_ops *tile_dma_map_ops = &tile_default_dma_map_ops; +EXPORT_SYMBOL(tile_dma_map_ops); + +/* Generic PCI DMA mapping functions */ + +static void *tile_pci_dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp, + struct dma_attrs *attrs) +{ + int node = dev_to_node(dev); + int order = get_order(size); + struct page *pg; + dma_addr_t addr; + + gfp |= __GFP_ZERO; + + pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_DMA); + if (pg == NULL) + return NULL; + + addr = page_to_phys(pg); + + *dma_handle = phys_to_dma(dev, addr); + + return page_address(pg); +} + +/* + * Free memory that was allocated with tile_pci_dma_alloc_coherent. + */ +static void tile_pci_dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) +{ + homecache_free_pages((unsigned long)vaddr, get_order(size)); } -EXPORT_SYMBOL(dma_unmap_single); -int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, - enum dma_data_direction direction) +static int tile_pci_dma_map_sg(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) { struct scatterlist *sg; int i; @@ -143,73 +385,103 @@ int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, for_each_sg(sglist, sg, nents, i) { sg->dma_address = sg_phys(sg); - __dma_map_pa_range(sg->dma_address, sg->length); + __dma_prep_pa_range(sg->dma_address, sg->length, direction); + + sg->dma_address = phys_to_dma(dev, sg->dma_address); +#ifdef CONFIG_NEED_SG_DMA_LENGTH + sg->dma_length = sg->length; +#endif } return nents; } -EXPORT_SYMBOL(dma_map_sg); -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) +static void tile_pci_dma_unmap_sg(struct device *dev, + struct scatterlist *sglist, int nents, + enum dma_data_direction direction, + struct dma_attrs *attrs) { + struct scatterlist *sg; + int i; + BUG_ON(!valid_dma_direction(direction)); + for_each_sg(sglist, sg, nents, i) { + sg->dma_address = sg_phys(sg); + __dma_complete_pa_range(sg->dma_address, sg->length, + direction); + } } -EXPORT_SYMBOL(dma_unmap_sg); -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) +static dma_addr_t tile_pci_dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { BUG_ON(!valid_dma_direction(direction)); BUG_ON(offset + size > PAGE_SIZE); - homecache_flush_cache(page, 0); + __dma_prep_page(page, offset, size, direction); - return page_to_pa(page) + offset; + return phys_to_dma(dev, page_to_pa(page) + offset); } -EXPORT_SYMBOL(dma_map_page); -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) +static void tile_pci_dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { BUG_ON(!valid_dma_direction(direction)); + + dma_address = dma_to_phys(dev, dma_address); + + __dma_complete_page(pfn_to_page(PFN_DOWN(dma_address)), + dma_address & PAGE_OFFSET, size, direction); } -EXPORT_SYMBOL(dma_unmap_page); -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) +static void tile_pci_dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction direction) { BUG_ON(!valid_dma_direction(direction)); + + dma_handle = dma_to_phys(dev, dma_handle); + + __dma_complete_pa_range(dma_handle, size, direction); } -EXPORT_SYMBOL(dma_sync_single_for_cpu); -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) +static void tile_pci_dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction + direction) { - unsigned long start = PFN_DOWN(dma_handle); - unsigned long end = PFN_DOWN(dma_handle + size - 1); - unsigned long i; + dma_handle = dma_to_phys(dev, dma_handle); - BUG_ON(!valid_dma_direction(direction)); - for (i = start; i <= end; ++i) - homecache_flush_cache(pfn_to_page(i), 0); + __dma_prep_pa_range(dma_handle, size, direction); } -EXPORT_SYMBOL(dma_sync_single_for_device); -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) +static void tile_pci_dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sglist, + int nelems, + enum dma_data_direction direction) { + struct scatterlist *sg; + int i; + BUG_ON(!valid_dma_direction(direction)); - WARN_ON(nelems == 0 || sg[0].length == 0); + WARN_ON(nelems == 0 || sglist->length == 0); + + for_each_sg(sglist, sg, nelems, i) { + dma_sync_single_for_cpu(dev, sg->dma_address, + sg_dma_len(sg), direction); + } } -EXPORT_SYMBOL(dma_sync_sg_for_cpu); -/* - * Flush and invalidate cache for scatterlist. - */ -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction) +static void tile_pci_dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sglist, + int nelems, + enum dma_data_direction direction) { struct scatterlist *sg; int i; @@ -222,31 +494,93 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist, sg_dma_len(sg), direction); } } -EXPORT_SYMBOL(dma_sync_sg_for_device); -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) +static inline int +tile_pci_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { - dma_sync_single_for_cpu(dev, dma_handle + offset, size, direction); + return 0; } -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); -void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) +static inline int +tile_pci_dma_supported(struct device *dev, u64 mask) { - dma_sync_single_for_device(dev, dma_handle + offset, size, direction); + return 1; } -EXPORT_SYMBOL(dma_sync_single_range_for_device); -/* - * dma_alloc_noncoherent() returns non-cacheable memory, so there's no - * need to do any flushing here. - */ -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) +static struct dma_map_ops tile_pci_default_dma_map_ops = { + .alloc = tile_pci_dma_alloc_coherent, + .free = tile_pci_dma_free_coherent, + .map_page = tile_pci_dma_map_page, + .unmap_page = tile_pci_dma_unmap_page, + .map_sg = tile_pci_dma_map_sg, + .unmap_sg = tile_pci_dma_unmap_sg, + .sync_single_for_cpu = tile_pci_dma_sync_single_for_cpu, + .sync_single_for_device = tile_pci_dma_sync_single_for_device, + .sync_sg_for_cpu = tile_pci_dma_sync_sg_for_cpu, + .sync_sg_for_device = tile_pci_dma_sync_sg_for_device, + .mapping_error = tile_pci_dma_mapping_error, + .dma_supported = tile_pci_dma_supported +}; + +struct dma_map_ops *gx_pci_dma_map_ops = &tile_pci_default_dma_map_ops; +EXPORT_SYMBOL(gx_pci_dma_map_ops); + +/* PCI DMA mapping functions for legacy PCI devices */ + +#ifdef CONFIG_SWIOTLB +static void *tile_swiotlb_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp, + struct dma_attrs *attrs) { + gfp |= GFP_DMA; + return swiotlb_alloc_coherent(dev, size, dma_handle, gfp); +} + +static void tile_swiotlb_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_addr, + struct dma_attrs *attrs) +{ + swiotlb_free_coherent(dev, size, vaddr, dma_addr); +} + +static struct dma_map_ops pci_swiotlb_dma_ops = { + .alloc = tile_swiotlb_alloc_coherent, + .free = tile_swiotlb_free_coherent, + .map_page = swiotlb_map_page, + .unmap_page = swiotlb_unmap_page, + .map_sg = swiotlb_map_sg_attrs, + .unmap_sg = swiotlb_unmap_sg_attrs, + .sync_single_for_cpu = swiotlb_sync_single_for_cpu, + .sync_single_for_device = swiotlb_sync_single_for_device, + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, + .sync_sg_for_device = swiotlb_sync_sg_for_device, + .dma_supported = swiotlb_dma_supported, + .mapping_error = swiotlb_dma_mapping_error, +}; + +struct dma_map_ops *gx_legacy_pci_dma_map_ops = &pci_swiotlb_dma_ops; +#else +struct dma_map_ops *gx_legacy_pci_dma_map_ops; +#endif +EXPORT_SYMBOL(gx_legacy_pci_dma_map_ops); + +#ifdef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK +int dma_set_coherent_mask(struct device *dev, u64 mask) +{ + struct dma_map_ops *dma_ops = get_dma_ops(dev); + + /* Handle legacy PCI devices with limited memory addressability. */ + if (((dma_ops == gx_pci_dma_map_ops) || + (dma_ops == gx_legacy_pci_dma_map_ops)) && + (mask <= DMA_BIT_MASK(32))) { + if (mask > dev->archdata.max_direct_dma_addr) + mask = dev->archdata.max_direct_dma_addr; + } + + if (!dma_supported(dev, mask)) + return -EIO; + dev->coherent_dma_mask = mask; + return 0; } -EXPORT_SYMBOL(dma_cache_sync); +EXPORT_SYMBOL(dma_set_coherent_mask); +#endif diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index b56d12bf590..33c10864d2f 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -310,6 +310,7 @@ int __init pcibios_init(void) if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) { struct pci_controller *controller = &controllers[i]; struct pci_bus *bus; + LIST_HEAD(resources); if (tile_init_irqs(i, controller)) { pr_err("PCI: Could not initialize IRQs\n"); @@ -327,9 +328,11 @@ int __init pcibios_init(void) * This is inlined in linux/pci.h and calls into * pci_scan_bus_parented() in probe.c. */ - bus = pci_scan_bus(0, controller->ops, controller); + pci_add_resource(&resources, &ioport_resource); + pci_add_resource(&resources, &iomem_resource); + bus = pci_scan_root_bus(NULL, 0, controller->ops, controller, &resources); controller->root_bus = bus; - controller->last_busno = bus->subordinate; + controller->last_busno = bus->busn_res.end; } } @@ -401,16 +404,6 @@ void pcibios_set_master(struct pci_dev *dev) } /* - * This can be called from the generic PCI layer, but doesn't need to - * do anything. - */ -char __devinit *pcibios_setup(char *str) -{ - /* Nothing needs to be done. */ - return str; -} - -/* * This is called from the generic Linux layer. */ void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c new file mode 100644 index 00000000000..0e213e35ffc --- /dev/null +++ b/arch/tile/kernel/pci_gx.c @@ -0,0 +1,1543 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/mmzone.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/capability.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/irq.h> +#include <linux/msi.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/ctype.h> + +#include <asm/processor.h> +#include <asm/sections.h> +#include <asm/byteorder.h> + +#include <gxio/iorpc_globals.h> +#include <gxio/kiorpc.h> +#include <gxio/trio.h> +#include <gxio/iorpc_trio.h> +#include <hv/drv_trio_intf.h> + +#include <arch/sim.h> + +/* + * This file containes the routines to search for PCI buses, + * enumerate the buses, and configure any attached devices. + */ + +#define DEBUG_PCI_CFG 0 + +#if DEBUG_PCI_CFG +#define TRACE_CFG_WR(size, val, bus, dev, func, offset) \ + pr_info("CFG WR %d-byte VAL %#x to bus %d dev %d func %d addr %u\n", \ + size, val, bus, dev, func, offset & 0xFFF); +#define TRACE_CFG_RD(size, val, bus, dev, func, offset) \ + pr_info("CFG RD %d-byte VAL %#x from bus %d dev %d func %d addr %u\n", \ + size, val, bus, dev, func, offset & 0xFFF); +#else +#define TRACE_CFG_WR(...) +#define TRACE_CFG_RD(...) +#endif + +static int __devinitdata pci_probe = 1; + +/* Information on the PCIe RC ports configuration. */ +static int __devinitdata pcie_rc[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; + +/* + * On some platforms with one or more Gx endpoint ports, we need to + * delay the PCIe RC port probe for a few seconds to work around + * a HW PCIe link-training bug. The exact delay is specified with + * a kernel boot argument in the form of "pcie_rc_delay=T,P,S", + * where T is the TRIO instance number, P is the port number and S is + * the delay in seconds. If the delay is not provided, the value + * will be DEFAULT_RC_DELAY. + */ +static int __devinitdata rc_delay[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; + +/* Default number of seconds that the PCIe RC port probe can be delayed. */ +#define DEFAULT_RC_DELAY 10 + +/* Max number of seconds that the PCIe RC port probe can be delayed. */ +#define MAX_RC_DELAY 20 + +/* Array of the PCIe ports configuration info obtained from the BIB. */ +struct pcie_port_property pcie_ports[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; + +/* All drivers share the TRIO contexts defined here. */ +gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; + +/* Pointer to an array of PCIe RC controllers. */ +struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES]; +int num_rc_controllers; +static int num_ep_controllers; + +static struct pci_ops tile_cfg_ops; + +/* Mask of CPUs that should receive PCIe interrupts. */ +static struct cpumask intr_cpus_map; + +/* + * We don't need to worry about the alignment of resources. + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + return res->start; +} +EXPORT_SYMBOL(pcibios_align_resource); + + +/* + * Pick a CPU to receive and handle the PCIe interrupts, based on the IRQ #. + * For now, we simply send interrupts to non-dataplane CPUs. + * We may implement methods to allow user to specify the target CPUs, + * e.g. via boot arguments. + */ +static int tile_irq_cpu(int irq) +{ + unsigned int count; + int i = 0; + int cpu; + + count = cpumask_weight(&intr_cpus_map); + if (unlikely(count == 0)) { + pr_warning("intr_cpus_map empty, interrupts will be" + " delievered to dataplane tiles\n"); + return irq % (smp_height * smp_width); + } + + count = irq % count; + for_each_cpu(cpu, &intr_cpus_map) { + if (i++ == count) + break; + } + return cpu; +} + +/* + * Open a file descriptor to the TRIO shim. + */ +static int __devinit tile_pcie_open(int trio_index) +{ + gxio_trio_context_t *context = &trio_contexts[trio_index]; + int ret; + + /* + * This opens a file descriptor to the TRIO shim. + */ + ret = gxio_trio_init(context, trio_index); + if (ret < 0) + return ret; + + /* + * Allocate an ASID for the kernel. + */ + ret = gxio_trio_alloc_asids(context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: ASID alloc failure on TRIO %d, give up\n", + trio_index); + goto asid_alloc_failure; + } + + context->asid = ret; + +#ifdef USE_SHARED_PCIE_CONFIG_REGION + /* + * Alloc a PIO region for config access, shared by all MACs per TRIO. + * This shouldn't fail since the kernel is supposed to the first + * client of the TRIO's PIO regions. + */ + ret = gxio_trio_alloc_pio_regions(context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: CFG PIO alloc failure on TRIO %d, give up\n", + trio_index); + goto pio_alloc_failure; + } + + context->pio_cfg_index = ret; + + /* + * For PIO CFG, the bus_address_hi parameter is 0. The mac parameter + * is also 0 because it is specified in PIO_REGION_SETUP_CFG_ADDR. + */ + ret = gxio_trio_init_pio_region_aux(context, context->pio_cfg_index, + 0, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE); + if (ret < 0) { + pr_err("PCI: CFG PIO init failure on TRIO %d, give up\n", + trio_index); + goto pio_alloc_failure; + } +#endif + + return ret; + +asid_alloc_failure: +#ifdef USE_SHARED_PCIE_CONFIG_REGION +pio_alloc_failure: +#endif + hv_dev_close(context->fd); + + return ret; +} + +static void +tilegx_legacy_irq_ack(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq); +} + +static void +tilegx_legacy_irq_mask(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq); +} + +static void +tilegx_legacy_irq_unmask(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq); +} + +static struct irq_chip tilegx_legacy_irq_chip = { + .name = "tilegx_legacy_irq", + .irq_ack = tilegx_legacy_irq_ack, + .irq_mask = tilegx_legacy_irq_mask, + .irq_unmask = tilegx_legacy_irq_unmask, + + /* TBD: support set_affinity. */ +}; + +/* + * This is a wrapper function of the kernel level-trigger interrupt + * handler handle_level_irq() for PCI legacy interrupts. The TRIO + * is configured such that only INTx Assert interrupts are proxied + * to Linux which just calls handle_level_irq() after clearing the + * MAC INTx Assert status bit associated with this interrupt. + */ +static void +trio_handle_level_irq(unsigned int irq, struct irq_desc *desc) +{ + struct pci_controller *controller = irq_desc_get_handler_data(desc); + gxio_trio_context_t *trio_context = controller->trio; + uint64_t intx = (uint64_t)irq_desc_get_chip_data(desc); + int mac = controller->mac; + unsigned int reg_offset; + uint64_t level_mask; + + handle_level_irq(irq, desc); + + /* + * Clear the INTx Level status, otherwise future interrupts are + * not sent. + */ + reg_offset = (TRIO_PCIE_INTFC_MAC_INT_STS << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + level_mask = TRIO_PCIE_INTFC_MAC_INT_STS__INT_LEVEL_MASK << intx; + + __gxio_mmio_write(trio_context->mmio_base_mac + reg_offset, level_mask); +} + +/* + * Create kernel irqs and set up the handlers for the legacy interrupts. + * Also some minimum initialization for the MSI support. + */ +static int __devinit tile_init_irqs(struct pci_controller *controller) +{ + int i; + int j; + int irq; + int result; + + cpumask_copy(&intr_cpus_map, cpu_online_mask); + + + for (i = 0; i < 4; i++) { + gxio_trio_context_t *context = controller->trio; + int cpu; + + /* Ask the kernel to allocate an IRQ. */ + irq = create_irq(); + if (irq < 0) { + pr_err("PCI: no free irq vectors, failed for %d\n", i); + + goto free_irqs; + } + controller->irq_intx_table[i] = irq; + + /* Distribute the 4 IRQs to different tiles. */ + cpu = tile_irq_cpu(irq); + + /* Configure the TRIO intr binding for this IRQ. */ + result = gxio_trio_config_legacy_intr(context, cpu_x(cpu), + cpu_y(cpu), KERNEL_PL, + irq, controller->mac, i); + if (result < 0) { + pr_err("PCI: MAC intx config failed for %d\n", i); + + goto free_irqs; + } + + /* + * Register the IRQ handler with the kernel. + */ + irq_set_chip_and_handler(irq, &tilegx_legacy_irq_chip, + trio_handle_level_irq); + irq_set_chip_data(irq, (void *)(uint64_t)i); + irq_set_handler_data(irq, controller); + } + + return 0; + +free_irqs: + for (j = 0; j < i; j++) + destroy_irq(controller->irq_intx_table[j]); + + return -1; +} + +/* + * Find valid controllers and fill in pci_controller structs for each + * of them. + * + * Returns the number of controllers discovered. + */ +int __init tile_pci_init(void) +{ + int num_trio_shims = 0; + int ctl_index = 0; + int i, j; + + if (!pci_probe) { + pr_info("PCI: disabled by boot argument\n"); + return 0; + } + + pr_info("PCI: Searching for controllers...\n"); + + /* + * We loop over all the TRIO shims. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + int ret; + + ret = tile_pcie_open(i); + if (ret < 0) + continue; + + num_trio_shims++; + } + + if (num_trio_shims == 0 || sim_is_simulator()) + return 0; + + /* + * Now determine which PCIe ports are configured to operate in RC mode. + * We look at the Board Information Block first and then see if there + * are any overriding configuration by the HW strapping pin. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + gxio_trio_context_t *context = &trio_contexts[i]; + int ret; + + if (context->fd < 0) + continue; + + ret = hv_dev_pread(context->fd, 0, + (HV_VirtAddr)&pcie_ports[i][0], + sizeof(struct pcie_port_property) * TILEGX_TRIO_PCIES, + GXIO_TRIO_OP_GET_PORT_PROPERTY); + if (ret < 0) { + pr_err("PCI: PCIE_GET_PORT_PROPERTY failure, error %d," + " on TRIO %d\n", ret, i); + continue; + } + + for (j = 0; j < TILEGX_TRIO_PCIES; j++) { + if (pcie_ports[i][j].allow_rc) { + pcie_rc[i][j] = 1; + num_rc_controllers++; + } + else if (pcie_ports[i][j].allow_ep) { + num_ep_controllers++; + } + } + } + + /* + * Return if no PCIe ports are configured to operate in RC mode. + */ + if (num_rc_controllers == 0) + return 0; + + /* + * Set the TRIO pointer and MAC index for each PCIe RC port. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + for (j = 0; j < TILEGX_TRIO_PCIES; j++) { + if (pcie_rc[i][j]) { + pci_controllers[ctl_index].trio = + &trio_contexts[i]; + pci_controllers[ctl_index].mac = j; + pci_controllers[ctl_index].trio_index = i; + ctl_index++; + if (ctl_index == num_rc_controllers) + goto out; + } + } + } + +out: + /* + * Configure each PCIe RC port. + */ + for (i = 0; i < num_rc_controllers; i++) { + /* + * Configure the PCIe MAC to run in RC mode. + */ + + struct pci_controller *controller = &pci_controllers[i]; + + controller->index = i; + controller->ops = &tile_cfg_ops; + + /* + * The PCI memory resource is located above the PA space. + * For every host bridge, the BAR window or the MMIO aperture + * is in range [3GB, 4GB - 1] of a 4GB space beyond the + * PA space. + */ + + controller->mem_offset = TILE_PCI_MEM_START + + (i * TILE_PCI_BAR_WINDOW_TOP); + controller->mem_space.start = controller->mem_offset + + TILE_PCI_BAR_WINDOW_TOP - TILE_PCI_BAR_WINDOW_SIZE; + controller->mem_space.end = controller->mem_offset + + TILE_PCI_BAR_WINDOW_TOP - 1; + controller->mem_space.flags = IORESOURCE_MEM; + snprintf(controller->mem_space_name, + sizeof(controller->mem_space_name), + "PCI mem domain %d", i); + controller->mem_space.name = controller->mem_space_name; + } + + return num_rc_controllers; +} + +/* + * (pin - 1) converts from the PCI standard's [1:4] convention to + * a normal [0:3] range. + */ +static int tile_map_irq(const struct pci_dev *dev, u8 device, u8 pin) +{ + struct pci_controller *controller = + (struct pci_controller *)dev->sysdata; + return controller->irq_intx_table[pin - 1]; +} + + +static void __devinit fixup_read_and_payload_sizes(struct pci_controller * + controller) +{ + gxio_trio_context_t *trio_context = controller->trio; + struct pci_bus *root_bus = controller->root_bus; + TRIO_PCIE_RC_DEVICE_CONTROL_t dev_control; + TRIO_PCIE_RC_DEVICE_CAP_t rc_dev_cap; + unsigned int reg_offset; + struct pci_bus *child; + int mac; + int err; + + mac = controller->mac; + + /* + * Set our max read request size to be 4KB. + */ + reg_offset = + (TRIO_PCIE_RC_DEVICE_CONTROL << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + dev_control.max_read_req_sz = 5; + __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, + dev_control.word); + + /* + * Set the max payload size supported by this Gx PCIe MAC. + * Though Gx PCIe supports Max Payload Size of up to 1024 bytes, + * experiments have shown that setting MPS to 256 yields the + * best performance. + */ + reg_offset = + (TRIO_PCIE_RC_DEVICE_CAP << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + rc_dev_cap.word = __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + rc_dev_cap.mps_sup = 1; + __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, + rc_dev_cap.word); + + /* Configure PCI Express MPS setting. */ + list_for_each_entry(child, &root_bus->children, node) { + struct pci_dev *self = child->self; + if (!self) + continue; + + pcie_bus_configure_settings(child, self->pcie_mpss); + } + + /* + * Set the mac_config register in trio based on the MPS/MRS of the link. + */ + reg_offset = + (TRIO_PCIE_RC_DEVICE_CONTROL << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + + err = gxio_trio_set_mps_mrs(trio_context, + dev_control.max_payload_size, + dev_control.max_read_req_sz, + mac); + if (err < 0) { + pr_err("PCI: PCIE_CONFIGURE_MAC_MPS_MRS failure, " + "MAC %d on TRIO %d\n", + mac, controller->trio_index); + } +} + +static int __devinit setup_pcie_rc_delay(char *str) +{ + unsigned long delay = 0; + unsigned long trio_index; + unsigned long mac; + + if (str == NULL || !isdigit(*str)) + return -EINVAL; + trio_index = simple_strtoul(str, (char **)&str, 10); + if (trio_index >= TILEGX_NUM_TRIO) + return -EINVAL; + + if (*str != ',') + return -EINVAL; + + str++; + if (!isdigit(*str)) + return -EINVAL; + mac = simple_strtoul(str, (char **)&str, 10); + if (mac >= TILEGX_TRIO_PCIES) + return -EINVAL; + + if (*str != '\0') { + if (*str != ',') + return -EINVAL; + + str++; + if (!isdigit(*str)) + return -EINVAL; + delay = simple_strtoul(str, (char **)&str, 10); + if (delay > MAX_RC_DELAY) + return -EINVAL; + } + + rc_delay[trio_index][mac] = delay ? : DEFAULT_RC_DELAY; + pr_info("Delaying PCIe RC link training for %u sec" + " on MAC %lu on TRIO %lu\n", rc_delay[trio_index][mac], + mac, trio_index); + return 0; +} +early_param("pcie_rc_delay", setup_pcie_rc_delay); + +/* + * PCI initialization entry point, called by subsys_initcall. + */ +int __init pcibios_init(void) +{ + resource_size_t offset; + LIST_HEAD(resources); + int next_busno; + int i; + + tile_pci_init(); + + if (num_rc_controllers == 0 && num_ep_controllers == 0) + return 0; + + /* + * We loop over all the TRIO shims and set up the MMIO mappings. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + gxio_trio_context_t *context = &trio_contexts[i]; + + if (context->fd < 0) + continue; + + /* + * Map in the MMIO space for the MAC. + */ + offset = 0; + context->mmio_base_mac = + iorpc_ioremap(context->fd, offset, + HV_TRIO_CONFIG_IOREMAP_SIZE); + if (context->mmio_base_mac == NULL) { + pr_err("PCI: MAC map failure on TRIO %d\n", i); + + hv_dev_close(context->fd); + context->fd = -1; + continue; + } + } + + /* + * Delay a bit in case devices aren't ready. Some devices are + * known to require at least 20ms here, but we use a more + * conservative value. + */ + msleep(250); + + /* Scan all of the recorded PCI controllers. */ + for (next_busno = 0, i = 0; i < num_rc_controllers; i++) { + struct pci_controller *controller = &pci_controllers[i]; + gxio_trio_context_t *trio_context = controller->trio; + TRIO_PCIE_INTFC_PORT_CONFIG_t port_config; + TRIO_PCIE_INTFC_PORT_STATUS_t port_status; + TRIO_PCIE_INTFC_TX_FIFO_CTL_t tx_fifo_ctl; + struct pci_bus *bus; + unsigned int reg_offset; + unsigned int class_code_revision; + int trio_index; + int mac; + int ret; + + if (trio_context->fd < 0) + continue; + + trio_index = controller->trio_index; + mac = controller->mac; + + /* + * Check the port strap state which will override the BIB + * setting. + */ + + reg_offset = + (TRIO_PCIE_INTFC_PORT_CONFIG << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + port_config.word = + __gxio_mmio_read(trio_context->mmio_base_mac + + reg_offset); + + if ((port_config.strap_state != + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC) && + (port_config.strap_state != + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1)) { + /* + * If this is really intended to be an EP port, + * record it so that the endpoint driver will know about it. + */ + if (port_config.strap_state == + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT || + port_config.strap_state == + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1) + pcie_ports[trio_index][mac].allow_ep = 1; + + continue; + } + + /* + * Delay the RC link training if needed. + */ + if (rc_delay[trio_index][mac]) + msleep(rc_delay[trio_index][mac] * 1000); + + ret = gxio_trio_force_rc_link_up(trio_context, mac); + if (ret < 0) + pr_err("PCI: PCIE_FORCE_LINK_UP failure, " + "MAC %d on TRIO %d\n", mac, trio_index); + + pr_info("PCI: Found PCI controller #%d on TRIO %d MAC %d\n", i, + trio_index, controller->mac); + + /* + * Wait a bit here because some EP devices take longer + * to come up. + */ + msleep(1000); + + /* + * Check for PCIe link-up status. + */ + + reg_offset = + (TRIO_PCIE_INTFC_PORT_STATUS << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + port_status.word = + __gxio_mmio_read(trio_context->mmio_base_mac + + reg_offset); + if (!port_status.dl_up) { + pr_err("PCI: link is down, MAC %d on TRIO %d\n", + mac, trio_index); + continue; + } + + /* + * Ensure that the link can come out of L1 power down state. + * Strictly speaking, this is needed only in the case of + * heavy RC-initiated DMAs. + */ + reg_offset = + (TRIO_PCIE_INTFC_TX_FIFO_CTL << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + tx_fifo_ctl.word = + __gxio_mmio_read(trio_context->mmio_base_mac + + reg_offset); + tx_fifo_ctl.min_p_credits = 0; + __gxio_mmio_write(trio_context->mmio_base_mac + reg_offset, + tx_fifo_ctl.word); + + /* + * Change the device ID so that Linux bus crawl doesn't confuse + * the internal bridge with any Tilera endpoints. + */ + + reg_offset = + (TRIO_PCIE_RC_DEVICE_ID_VEN_ID << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, + (TILERA_GX36_RC_DEV_ID << + TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT) | + TILERA_VENDOR_ID); + + /* + * Set the internal P2P bridge class code. + */ + + reg_offset = + (TRIO_PCIE_RC_REVISION_ID << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + class_code_revision = + __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + class_code_revision = (class_code_revision & 0xff ) | + (PCI_CLASS_BRIDGE_PCI << 16); + + __gxio_mmio_write32(trio_context->mmio_base_mac + + reg_offset, class_code_revision); + +#ifdef USE_SHARED_PCIE_CONFIG_REGION + + /* + * Map in the MMIO space for the PIO region. + */ + offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index) | + (((unsigned long long)mac) << + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT); + +#else + + /* + * Alloc a PIO region for PCI config access per MAC. + */ + ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: PCI CFG PIO alloc failure for mac %d " + "on TRIO %d, give up\n", mac, trio_index); + + continue; + } + + trio_context->pio_cfg_index[mac] = ret; + + /* + * For PIO CFG, the bus_address_hi parameter is 0. + */ + ret = gxio_trio_init_pio_region_aux(trio_context, + trio_context->pio_cfg_index[mac], + mac, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE); + if (ret < 0) { + pr_err("PCI: PCI CFG PIO init failure for mac %d " + "on TRIO %d, give up\n", mac, trio_index); + + continue; + } + + offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index[mac]) | + (((unsigned long long)mac) << + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT); + +#endif + + trio_context->mmio_base_pio_cfg[mac] = + iorpc_ioremap(trio_context->fd, offset, + (1 << TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT)); + if (trio_context->mmio_base_pio_cfg[mac] == NULL) { + pr_err("PCI: PIO map failure for mac %d on TRIO %d\n", + mac, trio_index); + + continue; + } + + /* + * Initialize the PCIe interrupts. + */ + if (tile_init_irqs(controller)) { + pr_err("PCI: IRQs init failure for mac %d on TRIO %d\n", + mac, trio_index); + + continue; + } + + /* + * The PCI memory resource is located above the PA space. + * The memory range for the PCI root bus should not overlap + * with the physical RAM + */ + pci_add_resource_offset(&resources, &controller->mem_space, + controller->mem_offset); + + controller->first_busno = next_busno; + bus = pci_scan_root_bus(NULL, next_busno, controller->ops, + controller, &resources); + controller->root_bus = bus; + next_busno = bus->busn_res.end + 1; + + } + + /* Do machine dependent PCI interrupt routing */ + pci_fixup_irqs(pci_common_swizzle, tile_map_irq); + + /* + * This comes from the generic Linux PCI driver. + * + * It allocates all of the resources (I/O memory, etc) + * associated with the devices read in above. + */ + + pci_assign_unassigned_resources(); + + /* Record the I/O resources in the PCI controller structure. */ + for (i = 0; i < num_rc_controllers; i++) { + struct pci_controller *controller = &pci_controllers[i]; + gxio_trio_context_t *trio_context = controller->trio; + struct pci_bus *root_bus = pci_controllers[i].root_bus; + struct pci_bus *next_bus; + uint32_t bus_address_hi; + struct pci_dev *dev; + int ret; + int j; + + /* + * Skip controllers that are not properly initialized or + * have down links. + */ + if (root_bus == NULL) + continue; + + /* Configure the max_payload_size values for this domain. */ + fixup_read_and_payload_sizes(controller); + + list_for_each_entry(dev, &root_bus->devices, bus_list) { + /* Find the PCI host controller, ie. the 1st bridge. */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && + (PCI_SLOT(dev->devfn) == 0)) { + next_bus = dev->subordinate; + pci_controllers[i].mem_resources[0] = + *next_bus->resource[0]; + pci_controllers[i].mem_resources[1] = + *next_bus->resource[1]; + pci_controllers[i].mem_resources[2] = + *next_bus->resource[2]; + + break; + } + } + + if (pci_controllers[i].mem_resources[1].flags & IORESOURCE_MEM) + bus_address_hi = + pci_controllers[i].mem_resources[1].start >> 32; + else if (pci_controllers[i].mem_resources[2].flags & IORESOURCE_PREFETCH) + bus_address_hi = + pci_controllers[i].mem_resources[2].start >> 32; + else { + /* This is unlikely. */ + pr_err("PCI: no memory resources on TRIO %d mac %d\n", + controller->trio_index, controller->mac); + continue; + } + + /* + * Alloc a PIO region for PCI memory access for each RC port. + */ + ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: MEM PIO alloc failure on TRIO %d mac %d, " + "give up\n", controller->trio_index, + controller->mac); + + continue; + } + + controller->pio_mem_index = ret; + + /* + * For PIO MEM, the bus_address_hi parameter is hard-coded 0 + * because we always assign 32-bit PCI bus BAR ranges. + */ + ret = gxio_trio_init_pio_region_aux(trio_context, + controller->pio_mem_index, + controller->mac, + 0, + 0); + if (ret < 0) { + pr_err("PCI: MEM PIO init failure on TRIO %d mac %d, " + "give up\n", controller->trio_index, + controller->mac); + + continue; + } + + /* + * Configure a Mem-Map region for each memory controller so + * that Linux can map all of its PA space to the PCI bus. + * Use the IOMMU to handle hash-for-home memory. + */ + for_each_online_node(j) { + unsigned long start_pfn = node_start_pfn[j]; + unsigned long end_pfn = node_end_pfn[j]; + unsigned long nr_pages = end_pfn - start_pfn; + + ret = gxio_trio_alloc_memory_maps(trio_context, 1, 0, + 0); + if (ret < 0) { + pr_err("PCI: Mem-Map alloc failure on TRIO %d " + "mac %d for MC %d, give up\n", + controller->trio_index, + controller->mac, j); + + goto alloc_mem_map_failed; + } + + controller->mem_maps[j] = ret; + + /* + * Initialize the Mem-Map and the I/O MMU so that all + * the physical memory can be accessed by the endpoint + * devices. The base bus address is set to the base CPA + * of this memory controller plus an offset (see pci.h). + * The region's base VA is set to the base CPA. The + * I/O MMU table essentially translates the CPA to + * the real PA. Implicitly, for node 0, we create + * a separate Mem-Map region that serves as the inbound + * window for legacy 32-bit devices. This is a direct + * map of the low 4GB CPA space. + */ + ret = gxio_trio_init_memory_map_mmu_aux(trio_context, + controller->mem_maps[j], + start_pfn << PAGE_SHIFT, + nr_pages << PAGE_SHIFT, + trio_context->asid, + controller->mac, + (start_pfn << PAGE_SHIFT) + + TILE_PCI_MEM_MAP_BASE_OFFSET, + j, + GXIO_TRIO_ORDER_MODE_UNORDERED); + if (ret < 0) { + pr_err("PCI: Mem-Map init failure on TRIO %d " + "mac %d for MC %d, give up\n", + controller->trio_index, + controller->mac, j); + + goto alloc_mem_map_failed; + } + continue; + +alloc_mem_map_failed: + break; + } + + } + + return 0; +} +subsys_initcall(pcibios_init); + +/* Note: to be deleted after Linux 3.6 merge. */ +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ +} + +/* + * This can be called from the generic PCI layer, but doesn't need to + * do anything. + */ +char __devinit *pcibios_setup(char *str) +{ + if (!strcmp(str, "off")) { + pci_probe = 0; + return NULL; + } + return str; +} + +/* + * This is called from the generic Linux layer. + */ +void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +/* + * Enable memory address decoding, as appropriate, for the + * device described by the 'dev' struct. The I/O decoding + * is disabled, though the TILE-Gx supports I/O addressing. + * + * This is called from the generic PCI layer, and can be called + * for bridges or endpoints. + */ +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + return pci_enable_resources(dev, mask); +} + +/* Called for each device after PCI setup is done. */ +static void __init +pcibios_fixup_final(struct pci_dev *pdev) +{ + set_dma_ops(&pdev->dev, gx_pci_dma_map_ops); + set_dma_offset(&pdev->dev, TILE_PCI_MEM_MAP_BASE_OFFSET); + pdev->dev.archdata.max_direct_dma_addr = + TILE_PCI_MAX_DIRECT_DMA_ADDRESS; +} +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final); + +/* Map a PCI MMIO bus address into VA space. */ +void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) +{ + struct pci_controller *controller = NULL; + resource_size_t bar_start; + resource_size_t bar_end; + resource_size_t offset; + resource_size_t start; + resource_size_t end; + int trio_fd; + int i, j; + + start = phys_addr; + end = phys_addr + size - 1; + + /* + * In the following, each PCI controller's mem_resources[1] + * represents its (non-prefetchable) PCI memory resource and + * mem_resources[2] refers to its prefetchable PCI memory resource. + * By searching phys_addr in each controller's mem_resources[], we can + * determine the controller that should accept the PCI memory access. + */ + + for (i = 0; i < num_rc_controllers; i++) { + /* + * Skip controllers that are not properly initialized or + * have down links. + */ + if (pci_controllers[i].root_bus == NULL) + continue; + + for (j = 1; j < 3; j++) { + bar_start = + pci_controllers[i].mem_resources[j].start; + bar_end = + pci_controllers[i].mem_resources[j].end; + + if ((start >= bar_start) && (end <= bar_end)) { + + controller = &pci_controllers[i]; + + goto got_it; + } + } + } + + if (controller == NULL) + return NULL; + +got_it: + trio_fd = controller->trio->fd; + + /* Convert the resource start to the bus address offset. */ + start = phys_addr - controller->mem_offset; + + offset = HV_TRIO_PIO_OFFSET(controller->pio_mem_index) + start; + + /* + * We need to keep the PCI bus address's in-page offset in the VA. + */ + return iorpc_ioremap(trio_fd, offset, size) + + (phys_addr & (PAGE_SIZE - 1)); +} +EXPORT_SYMBOL(ioremap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + +/**************************************************************** + * + * Tile PCI config space read/write routines + * + ****************************************************************/ + +/* + * These are the normal read and write ops + * These are expanded with macros from pci_bus_read_config_byte() etc. + * + * devfn is the combined PCI device & function. + * + * offset is in bytes, from the start of config space for the + * specified bus & device. + */ + +static int __devinit tile_cfg_read(struct pci_bus *bus, + unsigned int devfn, + int offset, + int size, + u32 *val) +{ + struct pci_controller *controller = bus->sysdata; + gxio_trio_context_t *trio_context = controller->trio; + int busnum = bus->number & 0xff; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int config_type = 1; + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t cfg_addr; + void *mmio_addr; + + /* + * Map all accesses to the local device on root bus into the + * MMIO space of the MAC. Accesses to the downstream devices + * go to the PIO space. + */ + if (pci_is_root_bus(bus)) { + if (device == 0) { + /* + * This is the internal downstream P2P bridge, + * access directly. + */ + unsigned int reg_offset; + + reg_offset = ((offset & 0xFFF) << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED + << TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (controller->mac << + TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + mmio_addr = trio_context->mmio_base_mac + reg_offset; + + goto valid_device; + + } else { + /* + * We fake an empty device for (device > 0), + * since there is only one device on bus 0. + */ + goto invalid_device; + } + } + + /* + * Accesses to the directly attached device have to be + * sent as type-0 configs. + */ + + if (busnum == (controller->first_busno + 1)) { + /* + * There is only one device off of our built-in P2P bridge. + */ + if (device != 0) + goto invalid_device; + + config_type = 0; + } + + cfg_addr.word = 0; + cfg_addr.reg_addr = (offset & 0xFFF); + cfg_addr.fn = function; + cfg_addr.dev = device; + cfg_addr.bus = busnum; + cfg_addr.type = config_type; + + /* + * Note that we don't set the mac field in cfg_addr because the + * mapping is per port. + */ + + mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] + + cfg_addr.word; + +valid_device: + + switch (size) { + case 4: + *val = __gxio_mmio_read32(mmio_addr); + break; + + case 2: + *val = __gxio_mmio_read16(mmio_addr); + break; + + case 1: + *val = __gxio_mmio_read8(mmio_addr); + break; + + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + TRACE_CFG_RD(size, *val, busnum, device, function, offset); + + return 0; + +invalid_device: + + switch (size) { + case 4: + *val = 0xFFFFFFFF; + break; + + case 2: + *val = 0xFFFF; + break; + + case 1: + *val = 0xFF; + break; + + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + return 0; +} + + +/* + * See tile_cfg_read() for relevent comments. + * Note that "val" is the value to write, not a pointer to that value. + */ +static int __devinit tile_cfg_write(struct pci_bus *bus, + unsigned int devfn, + int offset, + int size, + u32 val) +{ + struct pci_controller *controller = bus->sysdata; + gxio_trio_context_t *trio_context = controller->trio; + int busnum = bus->number & 0xff; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int config_type = 1; + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t cfg_addr; + void *mmio_addr; + u32 val_32 = (u32)val; + u16 val_16 = (u16)val; + u8 val_8 = (u8)val; + + /* + * Map all accesses to the local device on root bus into the + * MMIO space of the MAC. Accesses to the downstream devices + * go to the PIO space. + */ + if (pci_is_root_bus(bus)) { + if (device == 0) { + /* + * This is the internal downstream P2P bridge, + * access directly. + */ + unsigned int reg_offset; + + reg_offset = ((offset & 0xFFF) << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED + << TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (controller->mac << + TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + mmio_addr = trio_context->mmio_base_mac + reg_offset; + + goto valid_device; + + } else { + /* + * We fake an empty device for (device > 0), + * since there is only one device on bus 0. + */ + goto invalid_device; + } + } + + /* + * Accesses to the directly attached device have to be + * sent as type-0 configs. + */ + + if (busnum == (controller->first_busno + 1)) { + /* + * There is only one device off of our built-in P2P bridge. + */ + if (device != 0) + goto invalid_device; + + config_type = 0; + } + + cfg_addr.word = 0; + cfg_addr.reg_addr = (offset & 0xFFF); + cfg_addr.fn = function; + cfg_addr.dev = device; + cfg_addr.bus = busnum; + cfg_addr.type = config_type; + + /* + * Note that we don't set the mac field in cfg_addr because the + * mapping is per port. + */ + + mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] + + cfg_addr.word; + +valid_device: + + switch (size) { + case 4: + __gxio_mmio_write32(mmio_addr, val_32); + TRACE_CFG_WR(size, val_32, busnum, device, function, offset); + break; + + case 2: + __gxio_mmio_write16(mmio_addr, val_16); + TRACE_CFG_WR(size, val_16, busnum, device, function, offset); + break; + + case 1: + __gxio_mmio_write8(mmio_addr, val_8); + TRACE_CFG_WR(size, val_8, busnum, device, function, offset); + break; + + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + +invalid_device: + + return 0; +} + + +static struct pci_ops tile_cfg_ops = { + .read = tile_cfg_read, + .write = tile_cfg_write, +}; + + +/* + * MSI support starts here. + */ +static unsigned int +tilegx_msi_startup(struct irq_data *d) +{ + if (d->msi_desc) + unmask_msi_irq(d); + + return 0; +} + +static void +tilegx_msi_ack(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq); +} + +static void +tilegx_msi_mask(struct irq_data *d) +{ + mask_msi_irq(d); + __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq); +} + +static void +tilegx_msi_unmask(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq); + unmask_msi_irq(d); +} + +static struct irq_chip tilegx_msi_chip = { + .name = "tilegx_msi", + .irq_startup = tilegx_msi_startup, + .irq_ack = tilegx_msi_ack, + .irq_mask = tilegx_msi_mask, + .irq_unmask = tilegx_msi_unmask, + + /* TBD: support set_affinity. */ +}; + +int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) +{ + struct pci_controller *controller; + gxio_trio_context_t *trio_context; + struct msi_msg msg; + int default_irq; + uint64_t mem_map_base; + uint64_t mem_map_limit; + u64 msi_addr; + int mem_map; + int cpu; + int irq; + int ret; + + irq = create_irq(); + if (irq < 0) + return irq; + + /* + * Since we use a 64-bit Mem-Map to accept the MSI write, we fail + * devices that are not capable of generating a 64-bit message address. + * These devices will fall back to using the legacy interrupts. + * Most PCIe endpoint devices do support 64-bit message addressing. + */ + if (desc->msi_attrib.is_64 == 0) { + dev_printk(KERN_INFO, &pdev->dev, + "64-bit MSI message address not supported, " + "falling back to legacy interrupts.\n"); + + ret = -ENOMEM; + goto is_64_failure; + } + + default_irq = desc->msi_attrib.default_irq; + controller = irq_get_handler_data(default_irq); + + BUG_ON(!controller); + + trio_context = controller->trio; + + /* + * Allocate the Mem-Map that will accept the MSI write and + * trigger the TILE-side interrupts. + */ + mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0); + if (mem_map < 0) { + dev_printk(KERN_INFO, &pdev->dev, + "%s Mem-Map alloc failure. " + "Failed to initialize MSI interrupts. " + "Falling back to legacy interrupts.\n", + desc->msi_attrib.is_msix ? "MSI-X" : "MSI"); + + ret = -ENOMEM; + goto msi_mem_map_alloc_failure; + } + + /* We try to distribute different IRQs to different tiles. */ + cpu = tile_irq_cpu(irq); + + /* + * Now call up to the HV to configure the Mem-Map interrupt and + * set up the IPI binding. + */ + mem_map_base = MEM_MAP_INTR_REGIONS_BASE + + mem_map * MEM_MAP_INTR_REGION_SIZE; + mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1; + + ret = gxio_trio_config_msi_intr(trio_context, cpu_x(cpu), cpu_y(cpu), + KERNEL_PL, irq, controller->mac, + mem_map, mem_map_base, mem_map_limit, + trio_context->asid); + if (ret < 0) { + dev_printk(KERN_INFO, &pdev->dev, "HV MSI config failed.\n"); + + goto hv_msi_config_failure; + } + + irq_set_msi_desc(irq, desc); + + msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 - TRIO_MAP_MEM_REG_INT0; + + msg.address_hi = msi_addr >> 32; + msg.address_lo = msi_addr & 0xffffffff; + + msg.data = mem_map; + + write_msi_msg(irq, &msg); + irq_set_chip_and_handler(irq, &tilegx_msi_chip, handle_level_irq); + irq_set_handler_data(irq, controller); + + return 0; + +hv_msi_config_failure: + /* Free mem-map */ +msi_mem_map_alloc_failure: +is_64_failure: + destroy_irq(irq); + return ret; +} + +void arch_teardown_msi_irq(unsigned int irq) +{ + destroy_irq(irq); +} diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c index 6098ccc59be..6a649a4462d 100644 --- a/arch/tile/kernel/setup.c +++ b/arch/tile/kernel/setup.c @@ -23,12 +23,14 @@ #include <linux/irq.h> #include <linux/kexec.h> #include <linux/pci.h> +#include <linux/swiotlb.h> #include <linux/initrd.h> #include <linux/io.h> #include <linux/highmem.h> #include <linux/smp.h> #include <linux/timex.h> #include <linux/hugetlb.h> +#include <linux/start_kernel.h> #include <asm/setup.h> #include <asm/sections.h> #include <asm/cacheflush.h> @@ -108,7 +110,7 @@ static unsigned int __initdata maxnodemem_pfn[MAX_NUMNODES] = { }; static nodemask_t __initdata isolnodes; -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) enum { DEFAULT_PCI_RESERVE_MB = 64 }; static unsigned int __initdata pci_reserve_mb = DEFAULT_PCI_RESERVE_MB; unsigned long __initdata pci_reserve_start_pfn = -1U; @@ -159,7 +161,7 @@ static int __init setup_isolnodes(char *str) } early_param("isolnodes", setup_isolnodes); -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) static int __init setup_pci_reserve(char* str) { unsigned long mb; @@ -170,7 +172,7 @@ static int __init setup_pci_reserve(char* str) pci_reserve_mb = mb; pr_info("Reserving %dMB for PCIE root complex mappings\n", - pci_reserve_mb); + pci_reserve_mb); return 0; } early_param("pci_reserve", setup_pci_reserve); @@ -410,7 +412,7 @@ static void __init setup_memory(void) continue; } #endif -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) /* * Blocks that overlap the pci reserved region must * have enough space to hold the maximum percpu data @@ -603,11 +605,9 @@ static void __init setup_bootmem_allocator_node(int i) /* Free all the space back into the allocator. */ free_bootmem(PFN_PHYS(start), PFN_PHYS(end - start)); -#if defined(CONFIG_PCI) +#if defined(CONFIG_PCI) && !defined(__tilegx__) /* - * Throw away any memory aliased by the PCI region. FIXME: this - * is a temporary hack to work around bug 10502, and needs to be - * fixed properly. + * Throw away any memory aliased by the PCI region. */ if (pci_reserve_start_pfn < end && pci_reserve_end_pfn > start) reserve_bootmem(PFN_PHYS(pci_reserve_start_pfn), @@ -657,6 +657,8 @@ static void __init zone_sizes_init(void) unsigned long zones_size[MAX_NR_ZONES] = { 0 }; int size = percpu_size(); int num_cpus = smp_height * smp_width; + const unsigned long dma_end = (1UL << (32 - PAGE_SHIFT)); + int i; for (i = 0; i < num_cpus; ++i) @@ -728,6 +730,14 @@ static void __init zone_sizes_init(void) zones_size[ZONE_NORMAL] = end - start; #endif + if (start < dma_end) { + zones_size[ZONE_DMA] = min(zones_size[ZONE_NORMAL], + dma_end - start); + zones_size[ZONE_NORMAL] -= zones_size[ZONE_DMA]; + } else { + zones_size[ZONE_DMA] = 0; + } + /* Take zone metadata from controller 0 if we're isolnode. */ if (node_isset(i, isolnodes)) NODE_DATA(i)->bdata = &bootmem_node_data[0]; @@ -737,7 +747,7 @@ static void __init zone_sizes_init(void) PFN_UP(node_percpu[i])); /* Track the type of memory on each node */ - if (zones_size[ZONE_NORMAL]) + if (zones_size[ZONE_NORMAL] || zones_size[ZONE_DMA]) node_set_state(i, N_NORMAL_MEMORY); #ifdef CONFIG_HIGHMEM if (end != start) @@ -1342,7 +1352,7 @@ void __init setup_arch(char **cmdline_p) setup_cpu_maps(); -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) /* * Initialize the PCI structures. This is done before memory * setup so that we know whether or not a pci_reserve region @@ -1371,6 +1381,10 @@ void __init setup_arch(char **cmdline_p) * any memory using the bootmem allocator. */ +#ifdef CONFIG_SWIOTLB + swiotlb_init(0); +#endif + paging_init(); setup_numa_mapping(); zone_sizes_init(); @@ -1521,11 +1535,10 @@ static struct resource code_resource = { }; /* - * We reserve all resources above 4GB so that PCI won't try to put - * mappings above 4GB; the standard allows that for some devices but - * the probing code trunates values to 32 bits. + * On Pro, we reserve all resources above 4GB so that PCI won't try to put + * mappings above 4GB. */ -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) static struct resource* __init insert_non_bus_resource(void) { @@ -1570,8 +1583,7 @@ static int __init request_standard_resources(void) int i; enum { CODE_DELTA = MEM_SV_INTRPT - PAGE_OFFSET }; - iomem_resource.end = -1LL; -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) insert_non_bus_resource(); #endif @@ -1579,7 +1591,7 @@ static int __init request_standard_resources(void) u64 start_pfn = node_start_pfn[i]; u64 end_pfn = node_end_pfn[i]; -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) if (start_pfn <= pci_reserve_start_pfn && end_pfn > pci_reserve_start_pfn) { if (end_pfn > pci_reserve_end_pfn) diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c index 84873fbe8f2..e686c5ac90b 100644 --- a/arch/tile/kernel/smpboot.c +++ b/arch/tile/kernel/smpboot.c @@ -198,17 +198,7 @@ void __cpuinit online_secondary(void) notify_cpu_starting(smp_processor_id()); - /* - * We need to hold call_lock, so there is no inconsistency - * between the time smp_call_function() determines number of - * IPI recipients, and the time when the determination is made - * for which cpus receive the IPI. Holding this - * lock helps us to not include this cpu in a currently in progress - * smp_call_function(). - */ - ipi_call_lock(); set_cpu_online(smp_processor_id(), 1); - ipi_call_unlock(); __get_cpu_var(cpu_state) = CPU_ONLINE; /* Set up tile-specific state for this cpu. */ diff --git a/arch/tile/kernel/usb.c b/arch/tile/kernel/usb.c new file mode 100644 index 00000000000..5af8debc6a7 --- /dev/null +++ b/arch/tile/kernel/usb.c @@ -0,0 +1,69 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Register the Tile-Gx USB interfaces as platform devices. + * + * The actual USB driver is just some glue (in + * drivers/usb/host/[eo]hci-tilegx.c) which makes the registers available + * to the standard kernel EHCI and OHCI drivers. + */ + +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/usb/tilegx.h> +#include <linux/types.h> + +static u64 ehci_dmamask = DMA_BIT_MASK(32); + +#define USB_HOST_DEF(unit, type, dmamask) \ + static struct \ + tilegx_usb_platform_data tilegx_usb_platform_data_ ## type ## \ + hci ## unit = { \ + .dev_index = unit, \ + }; \ + \ + static struct platform_device tilegx_usb_ ## type ## hci ## unit = { \ + .name = "tilegx-" #type "hci", \ + .id = unit, \ + .dev = { \ + .dma_mask = dmamask, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ + .platform_data = \ + &tilegx_usb_platform_data_ ## type ## hci ## \ + unit, \ + }, \ + }; + +USB_HOST_DEF(0, e, &ehci_dmamask) +USB_HOST_DEF(0, o, NULL) +USB_HOST_DEF(1, e, &ehci_dmamask) +USB_HOST_DEF(1, o, NULL) + +#undef USB_HOST_DEF + +static struct platform_device *tilegx_usb_devices[] __initdata = { + &tilegx_usb_ehci0, + &tilegx_usb_ehci1, + &tilegx_usb_ohci0, + &tilegx_usb_ohci1, +}; + +/** Add our set of possible USB devices. */ +static int __init tilegx_usb_init(void) +{ + platform_add_devices(tilegx_usb_devices, + ARRAY_SIZE(tilegx_usb_devices)); + + return 0; +} +arch_initcall(tilegx_usb_init); |