summaryrefslogtreecommitdiffstats
path: root/arch/tile
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile')
-rw-r--r--arch/tile/lib/Makefile4
-rw-r--r--arch/tile/lib/memcpy_32.S206
-rw-r--r--arch/tile/lib/memmove.c (renamed from arch/tile/lib/memmove_32.c)0
-rw-r--r--arch/tile/lib/memset_32.c1
-rw-r--r--arch/tile/lib/strlen_32.c2
5 files changed, 109 insertions, 104 deletions
diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile
index 746dc81ed3c..93122d5b155 100644
--- a/arch/tile/lib/Makefile
+++ b/arch/tile/lib/Makefile
@@ -3,8 +3,8 @@
#
lib-y = cacheflush.o checksum.o cpumask.o delay.o \
- mb_incoherent.o uaccess.o \
- memcpy_$(BITS).o memchr_$(BITS).o memmove_$(BITS).o memset_$(BITS).o \
+ mb_incoherent.o uaccess.o memmove.o \
+ memcpy_$(BITS).o memchr_$(BITS).o memset_$(BITS).o \
strchr_$(BITS).o strlen_$(BITS).o
ifeq ($(CONFIG_TILEGX),y)
diff --git a/arch/tile/lib/memcpy_32.S b/arch/tile/lib/memcpy_32.S
index 30c3b7ebb55..2a419a6122d 100644
--- a/arch/tile/lib/memcpy_32.S
+++ b/arch/tile/lib/memcpy_32.S
@@ -10,14 +10,16 @@
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
- *
- * This file shares the implementation of the userspace memcpy and
- * the kernel's memcpy, copy_to_user and copy_from_user.
*/
#include <arch/chip.h>
+/*
+ * This file shares the implementation of the userspace memcpy and
+ * the kernel's memcpy, copy_to_user and copy_from_user.
+ */
+
#include <linux/linkage.h>
/* On TILE64, we wrap these functions via arch/tile/lib/memcpy_tile64.c */
@@ -53,9 +55,9 @@
*/
ENTRY(__copy_from_user_inatomic)
.type __copy_from_user_inatomic, @function
- FEEDBACK_ENTER_EXPLICIT(__copy_from_user_inatomic, \
+ FEEDBACK_ENTER_EXPLICIT(__copy_from_user_inatomic, \
.text.memcpy_common, \
- .Lend_memcpy_common - __copy_from_user_inatomic)
+ .Lend_memcpy_common - __copy_from_user_inatomic)
{ movei r29, IS_COPY_FROM_USER; j memcpy_common }
.size __copy_from_user_inatomic, . - __copy_from_user_inatomic
@@ -64,7 +66,7 @@ ENTRY(__copy_from_user_inatomic)
*/
ENTRY(__copy_from_user_zeroing)
.type __copy_from_user_zeroing, @function
- FEEDBACK_REENTER(__copy_from_user_inatomic)
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
{ movei r29, IS_COPY_FROM_USER_ZEROING; j memcpy_common }
.size __copy_from_user_zeroing, . - __copy_from_user_zeroing
@@ -74,13 +76,13 @@ ENTRY(__copy_from_user_zeroing)
*/
ENTRY(__copy_to_user_inatomic)
.type __copy_to_user_inatomic, @function
- FEEDBACK_REENTER(__copy_from_user_inatomic)
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
{ movei r29, IS_COPY_TO_USER; j memcpy_common }
.size __copy_to_user_inatomic, . - __copy_to_user_inatomic
ENTRY(memcpy)
.type memcpy, @function
- FEEDBACK_REENTER(__copy_from_user_inatomic)
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
{ movei r29, IS_MEMCPY }
.size memcpy, . - memcpy
/* Fall through */
@@ -157,35 +159,35 @@ EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
{ addi r3, r1, 60; andi r9, r9, -64 }
#if CHIP_HAS_WH64()
- /* No need to prefetch dst, we'll just do the wh64
- * right before we copy a line.
+ /* No need to prefetch dst, we'll just do the wh64
+ * right before we copy a line.
*/
#endif
EX: { lw r5, r3; addi r3, r3, 64; movei r4, 1 }
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bnzt zero, .; move r27, lr }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, .; move r27, lr }
EX: { lw r6, r3; addi r3, r3, 64 }
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bnzt zero, . }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
EX: { lw r7, r3; addi r3, r3, 64 }
#if !CHIP_HAS_WH64()
- /* Prefetch the dest */
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bnzt zero, . }
- /* Use a real load to cause a TLB miss if necessary. We aren't using
- * r28, so this should be fine.
- */
+ /* Prefetch the dest */
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ /* Use a real load to cause a TLB miss if necessary. We aren't using
+ * r28, so this should be fine.
+ */
EX: { lw r28, r9; addi r9, r9, 64 }
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bnzt zero, . }
- { prefetch r9; addi r9, r9, 64 }
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bnzt zero, . }
- { prefetch r9; addi r9, r9, 64 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ { prefetch r9; addi r9, r9, 64 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ { prefetch r9; addi r9, r9, 64 }
#endif
- /* Intentionally stall for a few cycles to leave L2 cache alone. */
- { bz zero, .Lbig_loop2 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bz zero, .Lbig_loop2 }
/* On entry to this loop:
* - r0 points to the start of dst line 0
@@ -197,7 +199,7 @@ EX: { lw r28, r9; addi r9, r9, 64 }
* to some "safe" recently loaded address.
* - r5 contains *(r1 + 60) [i.e. last word of source line 0]
* - r6 contains *(r1 + 64 + 60) [i.e. last word of source line 1]
- * - r9 contains ((r0 + 63) & -64)
+ * - r9 contains ((r0 + 63) & -64)
* [start of next dst cache line.]
*/
@@ -208,137 +210,137 @@ EX: { lw r28, r9; addi r9, r9, 64 }
/* Copy line 0, first stalling until r5 is ready. */
EX: { move r12, r5; lw r16, r1 }
{ bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
- /* Prefetch several lines ahead. */
+ /* Prefetch several lines ahead. */
EX: { lw r5, r3; addi r3, r3, 64 }
- { jal .Lcopy_line }
+ { jal .Lcopy_line }
/* Copy line 1, first stalling until r6 is ready. */
EX: { move r12, r6; lw r16, r1 }
{ bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
- /* Prefetch several lines ahead. */
+ /* Prefetch several lines ahead. */
EX: { lw r6, r3; addi r3, r3, 64 }
{ jal .Lcopy_line }
/* Copy line 2, first stalling until r7 is ready. */
EX: { move r12, r7; lw r16, r1 }
{ bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
- /* Prefetch several lines ahead. */
+ /* Prefetch several lines ahead. */
EX: { lw r7, r3; addi r3, r3, 64 }
- /* Use up a caches-busy cycle by jumping back to the top of the
- * loop. Might as well get it out of the way now.
- */
- { j .Lbig_loop }
+ /* Use up a caches-busy cycle by jumping back to the top of the
+ * loop. Might as well get it out of the way now.
+ */
+ { j .Lbig_loop }
/* On entry:
* - r0 points to the destination line.
* - r1 points to the source line.
- * - r3 is the next prefetch address.
+ * - r3 is the next prefetch address.
* - r9 holds the last address used for wh64.
* - r12 = WORD_15
- * - r16 = WORD_0.
- * - r17 == r1 + 16.
- * - r27 holds saved lr to restore.
+ * - r16 = WORD_0.
+ * - r17 == r1 + 16.
+ * - r27 holds saved lr to restore.
*
* On exit:
* - r0 is incremented by 64.
* - r1 is incremented by 64, unless that would point to a word
- * beyond the end of the source array, in which case it is redirected
- * to point to an arbitrary word already in the cache.
+ * beyond the end of the source array, in which case it is redirected
+ * to point to an arbitrary word already in the cache.
* - r2 is decremented by 64.
- * - r3 is unchanged, unless it points to a word beyond the
- * end of the source array, in which case it is redirected
- * to point to an arbitrary word already in the cache.
- * Redirecting is OK since if we are that close to the end
- * of the array we will not come back to this subroutine
- * and use the contents of the prefetched address.
+ * - r3 is unchanged, unless it points to a word beyond the
+ * end of the source array, in which case it is redirected
+ * to point to an arbitrary word already in the cache.
+ * Redirecting is OK since if we are that close to the end
+ * of the array we will not come back to this subroutine
+ * and use the contents of the prefetched address.
* - r4 is nonzero iff r2 >= 64.
- * - r9 is incremented by 64, unless it points beyond the
- * end of the last full destination cache line, in which
- * case it is redirected to a "safe address" that can be
- * clobbered (sp - 64)
+ * - r9 is incremented by 64, unless it points beyond the
+ * end of the last full destination cache line, in which
+ * case it is redirected to a "safe address" that can be
+ * clobbered (sp - 64)
* - lr contains the value in r27.
*/
/* r26 unused */
.Lcopy_line:
- /* TODO: when r3 goes past the end, we would like to redirect it
- * to prefetch the last partial cache line (if any) just once, for the
- * benefit of the final cleanup loop. But we don't want to
- * prefetch that line more than once, or subsequent prefetches
- * will go into the RTF. But then .Lbig_loop should unconditionally
- * branch to top of loop to execute final prefetch, and its
- * nop should become a conditional branch.
- */
-
- /* We need two non-memory cycles here to cover the resources
- * used by the loads initiated by the caller.
- */
- { add r15, r1, r2 }
+ /* TODO: when r3 goes past the end, we would like to redirect it
+ * to prefetch the last partial cache line (if any) just once, for the
+ * benefit of the final cleanup loop. But we don't want to
+ * prefetch that line more than once, or subsequent prefetches
+ * will go into the RTF. But then .Lbig_loop should unconditionally
+ * branch to top of loop to execute final prefetch, and its
+ * nop should become a conditional branch.
+ */
+
+ /* We need two non-memory cycles here to cover the resources
+ * used by the loads initiated by the caller.
+ */
+ { add r15, r1, r2 }
.Lcopy_line2:
- { slt_u r13, r3, r15; addi r17, r1, 16 }
+ { slt_u r13, r3, r15; addi r17, r1, 16 }
- /* NOTE: this will stall for one cycle as L1 is busy. */
+ /* NOTE: this will stall for one cycle as L1 is busy. */
- /* Fill second L1D line. */
+ /* Fill second L1D line. */
EX: { lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */
#if CHIP_HAS_WH64()
- /* Prepare destination line for writing. */
+ /* Prepare destination line for writing. */
EX: { wh64 r9; addi r9, r9, 64 }
#else
- /* Prefetch dest line */
+ /* Prefetch dest line */
{ prefetch r9; addi r9, r9, 64 }
#endif
- /* Load seven words that are L1D hits to cover wh64 L2 usage. */
+ /* Load seven words that are L1D hits to cover wh64 L2 usage. */
- /* Load the three remaining words from the last L1D line, which
- * we know has already filled the L1D.
- */
+ /* Load the three remaining words from the last L1D line, which
+ * we know has already filled the L1D.
+ */
EX: { lw r4, r1; addi r1, r1, 4; addi r20, r1, 16 } /* r4 = WORD_12 */
EX: { lw r8, r1; addi r1, r1, 4; slt_u r13, r20, r15 }/* r8 = WORD_13 */
EX: { lw r11, r1; addi r1, r1, -52; mvz r20, r13, r1 } /* r11 = WORD_14 */
- /* Load the three remaining words from the first L1D line, first
- * stalling until it has filled by "looking at" r16.
- */
+ /* Load the three remaining words from the first L1D line, first
+ * stalling until it has filled by "looking at" r16.
+ */
EX: { lw r13, r1; addi r1, r1, 4; move zero, r16 } /* r13 = WORD_1 */
EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_2 */
EX: { lw r15, r1; addi r1, r1, 8; addi r10, r0, 60 } /* r15 = WORD_3 */
- /* Load second word from the second L1D line, first
- * stalling until it has filled by "looking at" r17.
- */
+ /* Load second word from the second L1D line, first
+ * stalling until it has filled by "looking at" r17.
+ */
EX: { lw r19, r1; addi r1, r1, 4; move zero, r17 } /* r19 = WORD_5 */
- /* Store last word to the destination line, potentially dirtying it
- * for the first time, which keeps the L2 busy for two cycles.
- */
+ /* Store last word to the destination line, potentially dirtying it
+ * for the first time, which keeps the L2 busy for two cycles.
+ */
EX: { sw r10, r12 } /* store(WORD_15) */
- /* Use two L1D hits to cover the sw L2 access above. */
+ /* Use two L1D hits to cover the sw L2 access above. */
EX: { lw r10, r1; addi r1, r1, 4 } /* r10 = WORD_6 */
EX: { lw r12, r1; addi r1, r1, 4 } /* r12 = WORD_7 */
- /* Fill third L1D line. */
+ /* Fill third L1D line. */
EX: { lw r18, r1; addi r1, r1, 4 } /* r18 = WORD_8 */
- /* Store first L1D line. */
+ /* Store first L1D line. */
EX: { sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */
EX: { sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */
EX: { sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */
#if CHIP_HAS_WH64()
EX: { sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */
#else
- /* Back up the r9 to a cache line we are already storing to
+ /* Back up the r9 to a cache line we are already storing to
* if it gets past the end of the dest vector. Strictly speaking,
* we don't need to back up to the start of a cache line, but it's free
* and tidy, so why not?
- */
+ */
EX: { sw r0, r15; addi r0, r0, 4; andi r13, r0, -64 } /* store(WORD_3) */
#endif
- /* Store second L1D line. */
+ /* Store second L1D line. */
EX: { sw r0, r17; addi r0, r0, 4; mvz r9, r16, r13 }/* store(WORD_4) */
EX: { sw r0, r19; addi r0, r0, 4 } /* store(WORD_5) */
EX: { sw r0, r10; addi r0, r0, 4 } /* store(WORD_6) */
@@ -348,30 +350,30 @@ EX: { lw r13, r1; addi r1, r1, 4; move zero, r18 } /* r13 = WORD_9 */
EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_10 */
EX: { lw r15, r1; move r1, r20 } /* r15 = WORD_11 */
- /* Store third L1D line. */
+ /* Store third L1D line. */
EX: { sw r0, r18; addi r0, r0, 4 } /* store(WORD_8) */
EX: { sw r0, r13; addi r0, r0, 4 } /* store(WORD_9) */
EX: { sw r0, r14; addi r0, r0, 4 } /* store(WORD_10) */
EX: { sw r0, r15; addi r0, r0, 4 } /* store(WORD_11) */
- /* Store rest of fourth L1D line. */
+ /* Store rest of fourth L1D line. */
EX: { sw r0, r4; addi r0, r0, 4 } /* store(WORD_12) */
- {
+ {
EX: sw r0, r8 /* store(WORD_13) */
- addi r0, r0, 4
+ addi r0, r0, 4
/* Will r2 be > 64 after we subtract 64 below? */
- shri r4, r2, 7
- }
- {
+ shri r4, r2, 7
+ }
+ {
EX: sw r0, r11 /* store(WORD_14) */
- addi r0, r0, 8
- /* Record 64 bytes successfully copied. */
- addi r2, r2, -64
- }
+ addi r0, r0, 8
+ /* Record 64 bytes successfully copied. */
+ addi r2, r2, -64
+ }
{ jrp lr; move lr, r27 }
- /* Convey to the backtrace library that the stack frame is size
+ /* Convey to the backtrace library that the stack frame is size
* zero, and the real return address is on the stack rather than
* in 'lr'.
*/
diff --git a/arch/tile/lib/memmove_32.c b/arch/tile/lib/memmove.c
index fd615ae6ade..fd615ae6ade 100644
--- a/arch/tile/lib/memmove_32.c
+++ b/arch/tile/lib/memmove.c
diff --git a/arch/tile/lib/memset_32.c b/arch/tile/lib/memset_32.c
index d014c1fbcbc..57dbb3a5bff 100644
--- a/arch/tile/lib/memset_32.c
+++ b/arch/tile/lib/memset_32.c
@@ -18,6 +18,7 @@
#include <linux/string.h>
#include <linux/module.h>
+#undef memset
void *memset(void *s, int c, size_t n)
{
diff --git a/arch/tile/lib/strlen_32.c b/arch/tile/lib/strlen_32.c
index f26f88e11e4..4974292a553 100644
--- a/arch/tile/lib/strlen_32.c
+++ b/arch/tile/lib/strlen_32.c
@@ -16,6 +16,8 @@
#include <linux/string.h>
#include <linux/module.h>
+#undef strlen
+
size_t strlen(const char *s)
{
/* Get an aligned pointer. */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 04:34:23 +0000