diff options
Diffstat (limited to 'arch/um/Kconfig.net')
| -rw-r--r-- | arch/um/Kconfig.net | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/arch/um/Kconfig.net b/arch/um/Kconfig.net new file mode 100644 index 00000000000..14a04ebdeae --- /dev/null +++ b/arch/um/Kconfig.net @@ -0,0 +1,180 @@ + +menu "UML Network Devices" + depends on NET + +# UML virtual driver +config UML_NET + bool "Virtual network device" + help + While the User-Mode port cannot directly talk to any physical + hardware devices, this choice and the following transport options + provide one or more virtual network devices through which the UML + kernels can talk to each other, the host, and with the host's help, + machines on the outside world. + + For more information, including explanations of the networking and + sample configurations, see + <http://user-mode-linux.sourceforge.net/networking.html>. + + If you'd like to be able to enable networking in the User-Mode + linux environment, say Y; otherwise say N. Note that you must + enable at least one of the following transport options to actually + make use of UML networking. + +config UML_NET_ETHERTAP + bool "Ethertap transport" + depends on UML_NET + help + The Ethertap User-Mode Linux network transport allows a single + running UML to exchange packets with its host over one of the + host's Ethertap devices, such as /dev/tap0. Additional running + UMLs can use additional Ethertap devices, one per running UML. + While the UML believes it's on a (multi-device, broadcast) virtual + Ethernet network, it's in fact communicating over a point-to-point + link with the host. + + To use this, your host kernel must have support for Ethertap + devices. Also, if your host kernel is 2.4.x, it must have + CONFIG_NETLINK_DEV configured as Y or M. + + For more information, see + <http://user-mode-linux.sourceforge.net/networking.html> That site + has examples of the UML command line to use to enable Ethertap + networking. + + If you'd like to set up an IP network with the host and/or the + outside world, say Y to this, the Daemon Transport and/or the + Slip Transport. You'll need at least one of them, but may choose + more than one without conflict. If you don't need UML networking, + say N. + +config UML_NET_TUNTAP + bool "TUN/TAP transport" + depends on UML_NET + help + The UML TUN/TAP network transport allows a UML instance to exchange + packets with the host over a TUN/TAP device. This option will only + work with a 2.4 host, unless you've applied the TUN/TAP patch to + your 2.2 host kernel. + + To use this transport, your host kernel must have support for TUN/TAP + devices, either built-in or as a module. + +config UML_NET_SLIP + bool "SLIP transport" + depends on UML_NET + help + The slip User-Mode Linux network transport allows a running UML to + network with its host over a point-to-point link. Unlike Ethertap, + which can carry any Ethernet frame (and hence even non-IP packets), + the slip transport can only carry IP packets. + + To use this, your host must support slip devices. + + For more information, see + <http://user-mode-linux.sourceforge.net/networking.html>. That site + has examples of the UML command line to use to enable slip + networking, and details of a few quirks with it. + + The Ethertap Transport is preferred over slip because of its + limitations. If you prefer slip, however, say Y here. Otherwise + choose the Multicast transport (to network multiple UMLs on + multiple hosts), Ethertap (to network with the host and the + outside world), and/or the Daemon transport (to network multiple + UMLs on a single host). You may choose more than one without + conflict. If you don't need UML networking, say N. + +config UML_NET_DAEMON + bool "Daemon transport" + depends on UML_NET + help + This User-Mode Linux network transport allows one or more running + UMLs on a single host to communicate with each other, but not to + the host. + + To use this form of networking, you'll need to run the UML + networking daemon on the host. + + For more information, see + <http://user-mode-linux.sourceforge.net/networking.html> That site + has examples of the UML command line to use to enable Daemon + networking. + + If you'd like to set up a network with other UMLs on a single host, + say Y. If you need a network between UMLs on multiple physical + hosts, choose the Multicast Transport. To set up a network with + the host and/or other IP machines, say Y to the Ethertap or Slip + transports. You'll need at least one of them, but may choose + more than one without conflict. If you don't need UML networking, + say N. + +config UML_NET_MCAST + bool "Multicast transport" + depends on UML_NET + help + This Multicast User-Mode Linux network transport allows multiple + UMLs (even ones running on different host machines!) to talk to + each other over a virtual ethernet network. However, it requires + at least one UML with one of the other transports to act as a + bridge if any of them need to be able to talk to their hosts or any + other IP machines. + + To use this, your host kernel(s) must support IP Multicasting. + + For more information, see + <http://user-mode-linux.sourceforge.net/networking.html> That site + has examples of the UML command line to use to enable Multicast + networking, and notes about the security of this approach. + + If you need UMLs on multiple physical hosts to communicate as if + they shared an Ethernet network, say Y. If you need to communicate + with other IP machines, make sure you select one of the other + transports (possibly in addition to Multicast; they're not + exclusive). If you don't need to network UMLs say N to each of + the transports. + +config UML_NET_PCAP + bool "pcap transport" + depends on UML_NET && EXPERIMENTAL + help + The pcap transport makes a pcap packet stream on the host look + like an ethernet device inside UML. This is useful for making + UML act as a network monitor for the host. You must have libcap + installed in order to build the pcap transport into UML. + + For more information, see + <http://user-mode-linux.sourceforge.net/networking.html> That site + has examples of the UML command line to use to enable this option. + + If you intend to use UML as a network monitor for the host, say + Y here. Otherwise, say N. + +config UML_NET_SLIRP + bool "SLiRP transport" + depends on UML_NET + help + The SLiRP User-Mode Linux network transport allows a running UML + to network by invoking a program that can handle SLIP encapsulated + packets. This is commonly (but not limited to) the application + known as SLiRP, a program that can re-socket IP packets back onto + the host on which it is run. Only IP packets are supported, + unlike other network transports that can handle all Ethernet + frames. In general, slirp allows the UML the same IP connectivity + to the outside world that the host user is permitted, and unlike + other transports, SLiRP works without the need of root level + privleges, setuid binaries, or SLIP devices on the host. This + also means not every type of connection is possible, but most + situations can be accomodated with carefully crafted slirp + commands that can be passed along as part of the network device's + setup string. The effect of this transport on the UML is similar + that of a host behind a firewall that masquerades all network + connections passing through it (but is less secure). + + To use this you should first have slirp compiled somewhere + accessible on the host, and have read its documentation. If you + don't need UML networking, say N. + + Startup example: "eth0=slirp,FE:FD:01:02:03:04,/usr/local/bin/slirp" + +endmenu + |