summaryrefslogtreecommitdiffstats
path: root/arch/v850/kernel/fpga85e2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/v850/kernel/fpga85e2c.c')
-rw-r--r--arch/v850/kernel/fpga85e2c.c167
1 files changed, 0 insertions, 167 deletions
diff --git a/arch/v850/kernel/fpga85e2c.c b/arch/v850/kernel/fpga85e2c.c
deleted file mode 100644
index ab9cf16a85c..00000000000
--- a/arch/v850/kernel/fpga85e2c.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * arch/v850/kernel/fpga85e2c.h -- Machine-dependent defs for
- * FPGA implementation of V850E2/NA85E2C
- *
- * Copyright (C) 2002,03 NEC Electronics Corporation
- * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-extern void memcons_setup (void);
-
-
-#define REG_DUMP_ADDR 0x220000
-
-
-extern struct irqaction reg_snap_action; /* fwd decl */
-
-
-void __init mach_early_init (void)
-{
- int i;
- const u32 *src;
- register u32 *dst asm ("ep");
- extern u32 _intv_end, _intv_load_start;
-
- /* Set bus sizes: CS0 32-bit, CS1 16-bit, CS7 8-bit,
- everything else 32-bit. */
- V850E2_BSC = 0x2AA6;
- for (i = 2; i <= 6; i++)
- CSDEV(i) = 0; /* 32 bit */
-
- /* Ensure that the simulator halts on a panic, instead of going
- into an infinite loop inside the panic function. */
- panic_timeout = -1;
-
- /* Move the interrupt vectors into their real location. Note that
- any relocations there are relative to the real location, so we
- don't have to fix anything up. We use a loop instead of calling
- memcpy to keep this a leaf function (to avoid a function
- prologue being generated). */
- dst = 0x10; /* &_intv_start + 0x10. */
- src = &_intv_load_start;
- do {
- u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
- u32 t4 = src[4], t5 = src[5], t6 = src[6], t7 = src[7];
- dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
- dst[4] = t4; dst[5] = t5; dst[6] = t6; dst[7] = t7;
- dst += 8;
- src += 8;
- } while (dst < &_intv_end);
-}
-
-void __init mach_setup (char **cmdline)
-{
- memcons_setup ();
-
- /* Setup up NMI0 to copy the registers to a known memory location.
- The FGPA board has a button that produces NMI0 when pressed, so
- this allows us to push the button, and then look at memory to see
- what's in the registers (there's no other way to easily do so).
- We have to use `setup_irq' instead of `request_irq' because it's
- still too early to do memory allocation. */
- setup_irq (IRQ_NMI (0), &reg_snap_action);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
- *ram_start = ERAM_ADDR;
- *ram_len = ERAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
- /* Setup up the timer interrupt. The FPGA peripheral control
- registers _only_ work with single-bit writes (set1/clr1)! */
- __clear_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
- __clear_bit (RPU_GTMC_CLK_BIT, &RPU_GTMC);
- __set_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-
- /* We use the first RPU interrupt, which occurs every 8.192ms. */
- setup_irq (IRQ_RPU (0), timer_action);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
- tv->tv_sec = 0;
- tv->tv_nsec = 0;
-}
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
- for (;;) {
- DWC(0) = 0x7777;
- DWC(1) = 0x7777;
- ASC = 0xffff;
- FLGREG(0) = 1; /* Halt immediately. */
- asm ("di; halt; nop; nop; nop; nop; nop");
- }
-}
-
-void machine_restart (char *__unused)
-{
- machine_halt ();
-}
-
-void machine_power_off (void)
-{
- machine_halt ();
-}
-
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
- { "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
- { "RPU", IRQ_RPU(0), IRQ_RPU_NUM, 1, 6 },
- { 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize interrupts. */
-void __init mach_init_irqs (void)
-{
- v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-/* An interrupt handler that copies the registers to a known memory location,
- for debugging purposes. */
-
-static void make_reg_snap (int irq, void *dummy, struct pt_regs *regs)
-{
- (*(unsigned *)REG_DUMP_ADDR)++;
- (*(struct pt_regs *)(REG_DUMP_ADDR + sizeof (unsigned))) = *regs;
-}
-
-static int reg_snap_dev_id;
-static struct irqaction reg_snap_action = {
- .handler = make_reg_snap,
- .mask = CPU_MASK_NONE,
- .name = "reg_snap",
- .dev_id = &reg_snap_dev_id,
-};