summaryrefslogtreecommitdiffstats
path: root/arch/v850/kernel/me2.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/v850/kernel/me2.c')
-rw-r--r--arch/v850/kernel/me2.c73
1 files changed, 0 insertions, 73 deletions
diff --git a/arch/v850/kernel/me2.c b/arch/v850/kernel/me2.c
deleted file mode 100644
index 007115dc9ce..00000000000
--- a/arch/v850/kernel/me2.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/v850/kernel/me2.c -- V850E/ME2 chip-specific support
- *
- * Copyright (C) 2003 NEC Corporation
- * Copyright (C) 2003 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
- /* Start hardware timer. */
- v850e_timer_d_configure (0, HZ);
- /* Install timer interrupt handler. */
- setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
- { "IRQ", 0, NUM_CPU_IRQS, 1, 7 },
- { "INTP", IRQ_INTP(0), IRQ_INTP_NUM, 1, 5 },
- { "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM, 1, 3 },
- { "UBTIRE", IRQ_INTUBTIRE(0), IRQ_INTUBTIRE_NUM, 5, 4 },
- { "UBTIR", IRQ_INTUBTIR(0), IRQ_INTUBTIR_NUM, 5, 4 },
- { "UBTIT", IRQ_INTUBTIT(0), IRQ_INTUBTIT_NUM, 5, 4 },
- { "UBTIF", IRQ_INTUBTIF(0), IRQ_INTUBTIF_NUM, 5, 4 },
- { "UBTITO", IRQ_INTUBTITO(0), IRQ_INTUBTITO_NUM, 5, 4 },
- { 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize V850E/ME2 chip interrupts. */
-void __init me2_init_irqs (void)
-{
- v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART. */
-void me2_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
- if (chan == 0) {
- /* Specify that the relevant pins on the chip should do
- serial I/O, not direct I/O. */
- ME2_PORT1_PMC |= 0xC;
- /* Specify that we're using the UART, not the CSI device. */
- ME2_PORT1_PFC |= 0xC;
- } else if (chan == 1) {
- /* Specify that the relevant pins on the chip should do
- serial I/O, not direct I/O. */
- ME2_PORT2_PMC |= 0x6;
- /* Specify that we're using the UART, not the CSI device. */
- ME2_PORT2_PFC |= 0x6;
- }
-}