summaryrefslogtreecommitdiffstats
path: root/arch/v850/kernel/rte_nb85e_cb.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/v850/kernel/rte_nb85e_cb.c')
-rw-r--r--arch/v850/kernel/rte_nb85e_cb.c81
1 files changed, 0 insertions, 81 deletions
diff --git a/arch/v850/kernel/rte_nb85e_cb.c b/arch/v850/kernel/rte_nb85e_cb.c
deleted file mode 100644
index b4a045da5d7..00000000000
--- a/arch/v850/kernel/rte_nb85e_cb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/v850/kernel/rte_nb85e_cb.c -- Midas labs RTE-V850E/NB85E-CB board
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e.h>
-#include <asm/rte_nb85e_cb.h>
-
-#include "mach.h"
-
-void __init mach_early_init (void)
-{
- /* Configure caching; some possible settings:
-
- BHC = 0x0000, DCC = 0x0000 -- all caching disabled
- BHC = 0x0040, DCC = 0x0000 -- SDRAM: icache only
- BHC = 0x0080, DCC = 0x0C00 -- SDRAM: write-back dcache only
- BHC = 0x00C0, DCC = 0x0C00 -- SDRAM: icache + write-back dcache
- BHC = 0x00C0, DCC = 0x0800 -- SDRAM: icache + write-thru dcache
-
- We can only cache SDRAM (we can't use cache SRAM because it's in
- the same memory region as the on-chip RAM and I/O space).
-
- Unfortunately, the dcache seems to be buggy, so we only use the
- icache for now. */
- v850e_cache_enable (0x0040 /*BHC*/, 0x0003 /*ICC*/, 0x0000 /*DCC*/);
-
- rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
- unsigned long *ram_len)
-{
- /* We just use SDRAM here. */
- *ram_start = SDRAM_ADDR;
- *ram_len = SDRAM_SIZE;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
- tv->tv_sec = 0;
- tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART. */
-void rte_nb85e_cb_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud)
-{
- /* The RTE-NB85E-CB connects some general-purpose I/O pins on the
- CPU to the RTS/CTS lines the UART's serial connection, as follows:
- P00 = CTS (in), P01 = DSR (in), P02 = RTS (out), P03 = DTR (out). */
-
- TEG_PORT0_PM = 0x03; /* P00 and P01 inputs, P02 and P03 outputs */
- TEG_PORT0_IO = 0x03; /* Accept input */
-
- /* Do pre-configuration for the actual UART. */
- teg_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
- teg_init_irqs ();
- rte_cb_init_irqs ();
-}