diff options
Diffstat (limited to 'arch/x86/Kconfig.cpu')
| -rw-r--r-- | arch/x86/Kconfig.cpu | 166 |
1 files changed, 138 insertions, 28 deletions
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index abff1b84ed5..0b7c4a3f065 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -38,8 +38,7 @@ config M386 - "Crusoe" for the Transmeta Crusoe series. - "Efficeon" for the Transmeta Efficeon series. - "Winchip-C6" for original IDT Winchip. - - "Winchip-2" for IDT Winchip 2. - - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. + - "Winchip-2" for IDT Winchips with 3dNow! capabilities. - "GeodeGX1" for Geode GX1 (Cyrix MediaGX). - "Geode GX/LX" For AMD Geode GX and LX processors. - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. @@ -194,19 +193,11 @@ config MWINCHIPC6 treat this chip as a 586TSC with some extended instructions and alignment requirements. -config MWINCHIP2 - bool "Winchip-2" - depends on X86_32 - help - Select this for an IDT Winchip-2. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment requirements. - config MWINCHIP3D - bool "Winchip-2A/Winchip-3" + bool "Winchip-2/Winchip-2A/Winchip-3" depends on X86_32 help - Select this for an IDT Winchip-2A or 3. Linux and GCC + Select this for an IDT Winchip-2, 2A or 3. Linux and GCC treat this chip as a 586TSC with some extended instructions and alignment requirements. Also enable out of order memory stores for this CPU, which can increase performance of some @@ -318,7 +309,7 @@ config X86_L1_CACHE_SHIFT int default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC default "4" if X86_ELAN || M486 || M386 || MGEODEGX1 - default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX + default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 config X86_XADD @@ -360,11 +351,7 @@ config X86_POPAD_OK config X86_ALIGNMENT_16 def_bool y - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 - -config X86_GOOD_APIC - def_bool y - depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64 + depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 config X86_INTEL_USERCOPY def_bool y @@ -372,7 +359,7 @@ config X86_INTEL_USERCOPY config X86_USE_PPRO_CHECKSUM def_bool y - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2 + depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2 config X86_USE_3DNOW def_bool y @@ -380,24 +367,27 @@ config X86_USE_3DNOW config X86_OOSTORE def_bool y - depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR + depends on (MWINCHIP3D || MWINCHIPC6) && MTRR # # P6_NOPs are a relatively minor optimization that require a family >= # 6 processor, except that it is broken on certain VIA chips. # Furthermore, AMD chips prefer a totally different sequence of NOPs -# (which work on all CPUs). As a result, disallow these if we're -# compiling X86_GENERIC but not X86_64 (these NOPs do work on all -# x86-64 capable chips); the list of processors in the right-hand clause -# are the cores that benefit from this optimization. +# (which work on all CPUs). In addition, it looks like Virtual PC +# does not understand them. +# +# As a result, disallow these if we're not compiling for X86_64 (these +# NOPs do work on all x86-64 capable chips); the list of processors in +# the right-hand clause are the cores that benefit from this optimization. # config X86_P6_NOP def_bool y - depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC) + depends on X86_64 + depends on (MCORE2 || MPENTIUM4 || MPSC) config X86_TSC def_bool y - depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64 + depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64 config X86_CMPXCHG64 def_bool y @@ -407,7 +397,7 @@ config X86_CMPXCHG64 # generates cmov. config X86_CMOV def_bool y - depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || X86_64) + depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64) config X86_MINIMUM_CPU_FAMILY int @@ -418,4 +408,124 @@ config X86_MINIMUM_CPU_FAMILY config X86_DEBUGCTLMSR def_bool y - depends on !(M586MMX || M586TSC || M586 || M486 || M386) + depends on !(MK6 || MWINCHIPC6 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386) + +menuconfig PROCESSOR_SELECT + bool "Supported processor vendors" if EMBEDDED + help + This lets you choose what x86 vendor support code your kernel + will include. + +config CPU_SUP_INTEL + default y + bool "Support Intel processors" if PROCESSOR_SELECT + help + This enables detection, tunings and quirks for Intel processors + + You need this enabled if you want your kernel to run on an + Intel CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on an Intel + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_CYRIX_32 + default y + bool "Support Cyrix processors" if PROCESSOR_SELECT + depends on !64BIT + help + This enables detection, tunings and quirks for Cyrix processors + + You need this enabled if you want your kernel to run on a + Cyrix CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Cyrix + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_AMD + default y + bool "Support AMD processors" if PROCESSOR_SELECT + help + This enables detection, tunings and quirks for AMD processors + + You need this enabled if you want your kernel to run on an + AMD CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on an AMD + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_CENTAUR_32 + default y + bool "Support Centaur processors" if PROCESSOR_SELECT + depends on !64BIT + help + This enables detection, tunings and quirks for Centaur processors + + You need this enabled if you want your kernel to run on a + Centaur CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Centaur + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_CENTAUR_64 + default y + bool "Support Centaur processors" if PROCESSOR_SELECT + depends on 64BIT + help + This enables detection, tunings and quirks for Centaur processors + + You need this enabled if you want your kernel to run on a + Centaur CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Centaur + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_TRANSMETA_32 + default y + bool "Support Transmeta processors" if PROCESSOR_SELECT + depends on !64BIT + help + This enables detection, tunings and quirks for Transmeta processors + + You need this enabled if you want your kernel to run on a + Transmeta CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a Transmeta + CPU might render the kernel unbootable. + + If unsure, say N. + +config CPU_SUP_UMC_32 + default y + bool "Support UMC processors" if PROCESSOR_SELECT + depends on !64BIT + help + This enables detection, tunings and quirks for UMC processors + + You need this enabled if you want your kernel to run on a + UMC CPU. Disabling this option on other types of CPUs + makes the kernel a tiny bit smaller. Disabling it on a UMC + CPU might render the kernel unbootable. + + If unsure, say N. + +config X86_DS + bool "Debug Store support" + default y + help + Add support for Debug Store. + This allows the kernel to provide a memory buffer to the hardware + to store various profiling and tracing events. + +config X86_PTRACE_BTS + bool "ptrace interface to Branch Trace Store" + default y + depends on (X86_DS && X86_DEBUGCTLMSR) + help + Add a ptrace interface to allow collecting an execution trace + of the traced task. + This collects control flow changes in a (cyclic) buffer and allows + debuggers to fill in the gaps and show an execution trace of the debuggee. |