summaryrefslogtreecommitdiffstats
path: root/arch/x86/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/Kconfig')
-rw-r--r--arch/x86/Kconfig125
1 files changed, 67 insertions, 58 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5ce86941333..46c3bff3ced 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -7,11 +7,14 @@ config 64BIT
Say no to build a 32-bit kernel - formerly known as i386
config X86_32
- def_bool !64BIT
+ def_bool y
+ depends on !64BIT
select CLKSRC_I8253
+ select HAVE_UID16
config X86_64
- def_bool 64BIT
+ def_bool y
+ depends on 64BIT
select X86_DEV_DMA_OPS
### Arch settings
@@ -36,6 +39,7 @@ config X86
select HAVE_KRETPROBES
select HAVE_OPTPROBES
select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_FENTRY if X86_64
select HAVE_C_RECORDMCOUNT
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACER
@@ -43,6 +47,7 @@ config X86
select HAVE_FUNCTION_GRAPH_FP_TEST
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_SYSCALL_TRACEPOINTS
+ select SYSCTL_EXCEPTION_TRACE
select HAVE_KVM
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
@@ -60,6 +65,9 @@ config X86
select HAVE_MIXED_BREAKPOINTS_REGS
select PERF_EVENTS
select HAVE_PERF_EVENTS_NMI
+ select HAVE_PERF_REGS
+ select HAVE_PERF_USER_STACK_DUMP
+ select HAVE_DEBUG_KMEMLEAK
select ANON_INODES
select HAVE_ALIGNED_STRUCT_PAGE if SLUB && !M386
select HAVE_CMPXCHG_LOCAL if !M386
@@ -80,6 +88,7 @@ config X86
select IRQ_FORCED_THREADING
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_BPF_JIT if X86_64
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE
select CLKEVT_I8253
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_IOMAP
@@ -97,9 +106,16 @@ config X86
select KTIME_SCALAR if X86_32
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
+ select HAVE_RCU_USER_QS if X86_64
+ select HAVE_IRQ_TIME_ACCOUNTING
+ select GENERIC_KERNEL_THREAD
+ select GENERIC_KERNEL_EXECVE
+ select MODULES_USE_ELF_REL if X86_32
+ select MODULES_USE_ELF_RELA if X86_64
config INSTRUCTION_DECODER
- def_bool (KPROBES || PERF_EVENTS || UPROBES)
+ def_bool y
+ depends on KPROBES || PERF_EVENTS || UPROBES
config OUTPUT_FORMAT
string
@@ -127,13 +143,15 @@ config SBUS
bool
config NEED_DMA_MAP_STATE
- def_bool (X86_64 || INTEL_IOMMU || DMA_API_DEBUG)
+ def_bool y
+ depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG
config NEED_SG_DMA_LENGTH
def_bool y
config GENERIC_ISA_DMA
- def_bool ISA_DMA_API
+ def_bool y
+ depends on ISA_DMA_API
config GENERIC_BUG
def_bool y
@@ -150,13 +168,16 @@ config GENERIC_GPIO
bool
config ARCH_MAY_HAVE_PC_FDC
- def_bool ISA_DMA_API
+ def_bool y
+ depends on ISA_DMA_API
config RWSEM_GENERIC_SPINLOCK
- def_bool !X86_XADD
+ def_bool y
+ depends on !X86_XADD
config RWSEM_XCHGADD_ALGORITHM
- def_bool X86_XADD
+ def_bool y
+ depends on X86_XADD
config GENERIC_CALIBRATE_DELAY
def_bool y
@@ -573,23 +594,18 @@ config PARAVIRT_TIME_ACCOUNTING
source "arch/x86/xen/Kconfig"
-config KVM_CLOCK
- bool "KVM paravirtualized clock"
- select PARAVIRT
- select PARAVIRT_CLOCK
- ---help---
- Turning on this option will allow you to run a paravirtualized clock
- when running over the KVM hypervisor. Instead of relying on a PIT
- (or probably other) emulation by the underlying device model, the host
- provides the guest with timing infrastructure such as time of day, and
- system time
-
config KVM_GUEST
- bool "KVM Guest support"
+ bool "KVM Guest support (including kvmclock)"
select PARAVIRT
+ select PARAVIRT
+ select PARAVIRT_CLOCK
+ default y if PARAVIRT_GUEST
---help---
This option enables various optimizations for running under the KVM
- hypervisor.
+ hypervisor. It includes a paravirtualized clock, so that instead
+ of relying on a PIT (or probably other) emulation by the
+ underlying device model, the host provides the guest with
+ timing infrastructure such as time of day, and system time
source "arch/x86/lguest/Kconfig"
@@ -746,13 +762,14 @@ config SWIOTLB
def_bool y if X86_64
---help---
Support for software bounce buffers used on x86-64 systems
- which don't have a hardware IOMMU (e.g. the current generation
- of Intel's x86-64 CPUs). Using this PCI devices which can only
- access 32-bits of memory can be used on systems with more than
- 3 GB of memory. If unsure, say Y.
+ which don't have a hardware IOMMU. Using this PCI devices
+ which can only access 32-bits of memory can be used on systems
+ with more than 3 GB of memory.
+ If unsure, say Y.
config IOMMU_HELPER
- def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+ def_bool y
+ depends on CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU
config MAXSMP
bool "Enable Maximum number of SMP Processors and NUMA Nodes"
@@ -796,17 +813,6 @@ config SCHED_MC
making when dealing with multi-core CPU chips at a cost of slightly
increased overhead in some places. If unsure say N here.
-config IRQ_TIME_ACCOUNTING
- bool "Fine granularity task level IRQ time accounting"
- default n
- ---help---
- Select this option to enable fine granularity task irq time
- accounting. This is done by reading a timestamp on each
- transitions between softirq and hardirq state, so there can be a
- small performance impact.
-
- If in doubt, say N here.
-
source "kernel/Kconfig.preempt"
config X86_UP_APIC
@@ -871,6 +877,7 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
config X86_MCE
bool "Machine Check / overheating reporting"
+ default y
---help---
Machine Check support allows the processor to notify the
kernel if it detects a problem (e.g. overheating, data corruption).
@@ -982,25 +989,25 @@ config X86_REBOOTFIXUPS
Say N otherwise.
config MICROCODE
- tristate "/dev/cpu/microcode - microcode support"
+ tristate "CPU microcode loading support"
select FW_LOADER
---help---
+
If you say Y here, you will be able to update the microcode on
certain Intel and AMD processors. The Intel support is for the
- IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
- Pentium 4, Xeon etc. The AMD support is for family 0x10 and
- 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
- You will obviously need the actual microcode binary data itself
- which is not shipped with the Linux kernel.
+ IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4,
+ Xeon etc. The AMD support is for families 0x10 and later. You will
+ obviously need the actual microcode binary data itself which is not
+ shipped with the Linux kernel.
This option selects the general module only, you need to select
at least one vendor specific module as well.
- To compile this driver as a module, choose M here: the
- module will be called microcode.
+ To compile this driver as a module, choose M here: the module
+ will be called microcode.
config MICROCODE_INTEL
- bool "Intel microcode patch loading support"
+ bool "Intel microcode loading support"
depends on MICROCODE
default MICROCODE
select FW_LOADER
@@ -1013,7 +1020,7 @@ config MICROCODE_INTEL
<http://www.urbanmyth.org/microcode/>.
config MICROCODE_AMD
- bool "AMD microcode patch loading support"
+ bool "AMD microcode loading support"
depends on MICROCODE
select FW_LOADER
---help---
@@ -1159,10 +1166,12 @@ config X86_PAE
consumes more pagetable space per process.
config ARCH_PHYS_ADDR_T_64BIT
- def_bool X86_64 || X86_PAE
+ def_bool y
+ depends on X86_64 || X86_PAE
config ARCH_DMA_ADDR_T_64BIT
- def_bool X86_64 || HIGHMEM64G
+ def_bool y
+ depends on X86_64 || HIGHMEM64G
config DIRECT_GBPAGES
bool "Enable 1GB pages for kernel pagetables" if EXPERT
@@ -1285,8 +1294,8 @@ config ARCH_SELECT_MEMORY_MODEL
depends on ARCH_SPARSEMEM_ENABLE
config ARCH_MEMORY_PROBE
- def_bool X86_64
- depends on MEMORY_HOTPLUG
+ def_bool y
+ depends on X86_64 && MEMORY_HOTPLUG
config ARCH_PROC_KCORE_TEXT
def_bool y
@@ -1986,7 +1995,6 @@ config PCI_MMCONFIG
config PCI_CNB20LE_QUIRK
bool "Read CNB20LE Host Bridge Windows" if EXPERT
- default n
depends on PCI && EXPERIMENTAL
help
Read the PCI windows out of the CNB20LE host bridge. This allows
@@ -2168,6 +2176,7 @@ config IA32_EMULATION
bool "IA32 Emulation"
depends on X86_64
select COMPAT_BINFMT_ELF
+ select HAVE_UID16
---help---
Include code to run legacy 32-bit programs under a
64-bit kernel. You should likely turn this on, unless you're
@@ -2197,18 +2206,18 @@ config COMPAT
depends on IA32_EMULATION || X86_X32
select ARCH_WANT_OLD_COMPAT_IPC
+if COMPAT
config COMPAT_FOR_U64_ALIGNMENT
- def_bool COMPAT
- depends on X86_64
+ def_bool y
config SYSVIPC_COMPAT
def_bool y
- depends on COMPAT && SYSVIPC
+ depends on SYSVIPC
config KEYS_COMPAT
- bool
- depends on COMPAT && KEYS
- default y
+ def_bool y
+ depends on KEYS
+endif
endmenu