diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 683 |
1 files changed, 362 insertions, 321 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bc2fbadff9f..5696cec7b4b 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -5,7 +5,7 @@ mainmenu "Linux Kernel Configuration for x86" config 64BIT bool "64-bit kernel" if ARCH = "x86" default ARCH = "x86_64" - help + ---help--- Say yes to build a 64-bit kernel - formerly known as x86_64 Say no to build a 32-bit kernel - formerly known as i386 @@ -34,12 +34,16 @@ config X86 select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST - select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) - select HAVE_ARCH_KGDB if !X86_VOYAGER + select HAVE_KVM + select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK select HAVE_GENERIC_DMA_COHERENT if X86_32 select HAVE_EFFICIENT_UNALIGNED_ACCESS select USER_STACKTRACE_SUPPORT + select HAVE_DMA_API_DEBUG + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA config ARCH_DEFCONFIG string @@ -133,18 +137,19 @@ config ARCH_HAS_CACHE_LINE_SIZE def_bool y config HAVE_SETUP_PER_CPU_AREA - def_bool X86_64_SMP || (X86_SMP && !X86_VOYAGER) + def_bool y + +config HAVE_DYNAMIC_PER_CPU_AREA + def_bool y config HAVE_CPUMASK_OF_CPU_MAP def_bool X86_64_SMP config ARCH_HIBERNATION_POSSIBLE def_bool y - depends on !SMP || !X86_VOYAGER config ARCH_SUSPEND_POSSIBLE def_bool y - depends on !X86_VOYAGER config ZONE_DMA32 bool @@ -160,11 +165,17 @@ config AUDIT_ARCH config ARCH_SUPPORTS_OPTIMIZED_INLINING def_bool y +config ARCH_SUPPORTS_DEBUG_PAGEALLOC + def_bool y + # Use the generic interrupt handling code in kernel/irq/: config GENERIC_HARDIRQS bool default y +config GENERIC_HARDIRQS_NO__DO_IRQ + def_bool y + config GENERIC_IRQ_PROBE bool default y @@ -174,11 +185,6 @@ config GENERIC_PENDING_IRQ depends on GENERIC_HARDIRQS && SMP default y -config X86_SMP - bool - depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64) - default y - config USE_GENERIC_SMP_HELPERS def_bool y depends on SMP @@ -194,19 +200,17 @@ config X86_64_SMP config X86_HT bool depends on SMP - depends on (X86_32 && !X86_VOYAGER) || X86_64 - default y - -config X86_BIOS_REBOOT - bool - depends on !X86_VOYAGER default y config X86_TRAMPOLINE bool - depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP) + depends on SMP || (64BIT && ACPI_SLEEP) default y +config X86_32_LAZY_GS + def_bool y + depends on X86_32 && !CC_STACKPROTECTOR + config KTIME_SCALAR def_bool X86_32 source "init/Kconfig" @@ -244,14 +248,24 @@ config SMP If you don't know what to do here, say N. -config X86_HAS_BOOT_CPU_ID - def_bool y - depends on X86_VOYAGER +config X86_X2APIC + bool "Support x2apic" + depends on X86_LOCAL_APIC && X86_64 + ---help--- + This enables x2apic support on CPUs that have this feature. + + This allows 32-bit apic IDs (so it can support very large systems), + and accesses the local apic via MSRs not via mmio. + + ( On certain CPU models you may need to enable INTR_REMAP too, + to get functional x2apic mode. ) + + If you don't know what to do here, say N. config SPARSE_IRQ bool "Support sparse irq numbering" depends on PCI_MSI || HT_IRQ - help + ---help--- This enables support for sparse irqs. This is useful for distro kernels that want to define a high CONFIG_NR_CPUS value but still want to have low kernel memory footprint on smaller machines. @@ -265,114 +279,140 @@ config NUMA_MIGRATE_IRQ_DESC bool "Move irq desc when changing irq smp_affinity" depends on SPARSE_IRQ && NUMA default n - help + ---help--- This enables moving irq_desc to cpu/node that irq will use handled. If you don't know what to do here, say N. -config X86_FIND_SMP_CONFIG - def_bool y - depends on X86_MPPARSE || X86_VOYAGER - config X86_MPPARSE bool "Enable MPS table" if ACPI default y depends on X86_LOCAL_APIC - help + ---help--- For old smp systems that do not have proper acpi support. Newer systems (esp with 64bit cpus) with acpi support, MADT and DSDT will override it -choice - prompt "Subarchitecture Type" - default X86_PC +config X86_BIGSMP + bool "Support for big SMP systems with more than 8 CPUs" + depends on X86_32 && SMP + ---help--- + This option is needed for the systems that have more than 8 CPUs -config X86_PC - bool "PC-compatible" - help - Choose this option if your computer is a standard PC or compatible. +if X86_32 +config X86_EXTENDED_PLATFORM + bool "Support for extended (non-PC) x86 platforms" + default y + ---help--- + If you disable this option then the kernel will only support + standard PC platforms. (which covers the vast majority of + systems out there.) + + If you enable this option then you'll be able to select support + for the following (non-PC) 32 bit x86 platforms: + AMD Elan + NUMAQ (IBM/Sequent) + RDC R-321x SoC + SGI 320/540 (Visual Workstation) + Summit/EXA (IBM x440) + Unisys ES7000 IA32 series + + If you have one of these systems, or if you want to build a + generic distribution kernel, say Y here - otherwise say N. +endif + +if X86_64 +config X86_EXTENDED_PLATFORM + bool "Support for extended (non-PC) x86 platforms" + default y + ---help--- + If you disable this option then the kernel will only support + standard PC platforms. (which covers the vast majority of + systems out there.) + + If you enable this option then you'll be able to select support + for the following (non-PC) 64 bit x86 platforms: + ScaleMP vSMP + SGI Ultraviolet + + If you have one of these systems, or if you want to build a + generic distribution kernel, say Y here - otherwise say N. +endif +# This is an alphabetically sorted list of 64 bit extended platforms +# Please maintain the alphabetic order if and when there are additions + +config X86_VSMP + bool "ScaleMP vSMP" + select PARAVIRT + depends on X86_64 && PCI + depends on X86_EXTENDED_PLATFORM + ---help--- + Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is + supposed to run on these EM64T-based machines. Only choose this option + if you have one of these machines. + +config X86_UV + bool "SGI Ultraviolet" + depends on X86_64 + depends on X86_EXTENDED_PLATFORM + select X86_X2APIC + ---help--- + This option is needed in order to support SGI Ultraviolet systems. + If you don't have one of these, you should say N here. + +# Following is an alphabetically sorted list of 32 bit extended platforms +# Please maintain the alphabetic order if and when there are additions config X86_ELAN bool "AMD Elan" depends on X86_32 - help + depends on X86_EXTENDED_PLATFORM + ---help--- Select this for an AMD Elan processor. Do not use this option for K6/Athlon/Opteron processors! If unsure, choose "PC-compatible" instead. -config X86_VOYAGER - bool "Voyager (NCR)" - depends on X86_32 && (SMP || BROKEN) && !PCI - help - Voyager is an MCA-based 32-way capable SMP architecture proprietary - to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based. - - *** WARNING *** - - If you do not specifically know you have a Voyager based machine, - say N here, otherwise the kernel you build will not be bootable. - -config X86_GENERICARCH - bool "Generic architecture" +config X86_RDC321X + bool "RDC R-321x SoC" depends on X86_32 - help - This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default + depends on X86_EXTENDED_PLATFORM + select M486 + select X86_REBOOTFIXUPS + ---help--- + This option is needed for RDC R-321x system-on-chip, also known + as R-8610-(G). + If you don't have one of these chips, you should say N here. + +config X86_32_NON_STANDARD + bool "Support non-standard 32-bit SMP architectures" + depends on X86_32 && SMP + depends on X86_EXTENDED_PLATFORM + ---help--- + This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default subarchitectures. It is intended for a generic binary kernel. if you select them all, kernel will probe it one by one. and will fallback to default. -if X86_GENERICARCH +# Alphabetically sorted list of Non standard 32 bit platforms config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" - depends on SMP && X86_32 && PCI && X86_MPPARSE + depends on X86_32_NON_STANDARD select NUMA - help + select X86_MPPARSE + ---help--- This option is used for getting Linux to run on a NUMAQ (IBM/Sequent) NUMA multiquad box. This changes the way that processors are bootstrapped, and uses Clustered Logical APIC addressing mode instead of Flat Logical. You will need a new lynxer.elf file to flash your firmware with - send email to <Martin.Bligh@us.ibm.com>. -config X86_SUMMIT - bool "Summit/EXA (IBM x440)" - depends on X86_32 && SMP - help - This option is needed for IBM systems that use the Summit/EXA chipset. - In particular, it is needed for the x440. - -config X86_ES7000 - bool "Support for Unisys ES7000 IA32 series" - depends on X86_32 && SMP - help - Support for Unisys ES7000 systems. Say 'Y' here if this kernel is - supposed to run on an IA32-based Unisys ES7000 system. - -config X86_BIGSMP - bool "Support for big SMP systems with more than 8 CPUs" - depends on X86_32 && SMP - help - This option is needed for the systems that have more than 8 CPUs - and if the system is not of any sub-arch type above. - -endif - -config X86_VSMP - bool "Support for ScaleMP vSMP" - select PARAVIRT - depends on X86_64 && PCI - help - Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is - supposed to run on these EM64T-based machines. Only choose this option - if you have one of these machines. - -endchoice - config X86_VISWS bool "SGI 320/540 (Visual Workstation)" - depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT - help + depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT + depends on X86_32_NON_STANDARD + ---help--- The SGI Visual Workstation series is an IA32-based workstation based on SGI systems chips with some legacy PC hardware attached. @@ -381,21 +421,25 @@ config X86_VISWS A kernel compiled for the Visual Workstation will run on general PCs as well. See <file:Documentation/sgi-visws.txt> for details. -config X86_RDC321X - bool "RDC R-321x SoC" - depends on X86_32 - select M486 - select X86_REBOOTFIXUPS - help - This option is needed for RDC R-321x system-on-chip, also known - as R-8610-(G). - If you don't have one of these chips, you should say N here. +config X86_SUMMIT + bool "Summit/EXA (IBM x440)" + depends on X86_32_NON_STANDARD + ---help--- + This option is needed for IBM systems that use the Summit/EXA chipset. + In particular, it is needed for the x440. + +config X86_ES7000 + bool "Unisys ES7000 IA32 series" + depends on X86_32_NON_STANDARD && X86_BIGSMP + ---help--- + Support for Unisys ES7000 systems. Say 'Y' here if this kernel is + supposed to run on an IA32-based Unisys ES7000 system. config SCHED_OMIT_FRAME_POINTER def_bool y prompt "Single-depth WCHAN output" depends on X86 - help + ---help--- Calculate simpler /proc/<PID>/wchan values. If this option is disabled then wchan values will recurse back to the caller function. This provides more accurate wchan values, @@ -405,7 +449,7 @@ config SCHED_OMIT_FRAME_POINTER menuconfig PARAVIRT_GUEST bool "Paravirtualized guest support" - help + ---help--- Say Y here to get to see options related to running Linux under various hypervisors. This option alone does not add any kernel code. @@ -419,8 +463,7 @@ config VMI bool "VMI Guest support" select PARAVIRT depends on X86_32 - depends on !X86_VOYAGER - help + ---help--- VMI provides a paravirtualized interface to the VMware ESX server (it could be used by other hypervisors in theory too, but is not at the moment), by linking the kernel to a GPL-ed ROM module @@ -430,8 +473,7 @@ config KVM_CLOCK bool "KVM paravirtualized clock" select PARAVIRT select PARAVIRT_CLOCK - depends on !X86_VOYAGER - help + ---help--- Turning on this option will allow you to run a paravirtualized clock when running over the KVM hypervisor. Instead of relying on a PIT (or probably other) emulation by the underlying device model, the host @@ -441,17 +483,15 @@ config KVM_CLOCK config KVM_GUEST bool "KVM Guest support" select PARAVIRT - depends on !X86_VOYAGER - help - This option enables various optimizations for running under the KVM - hypervisor. + ---help--- + This option enables various optimizations for running under the KVM + hypervisor. source "arch/x86/lguest/Kconfig" config PARAVIRT bool "Enable paravirtualization code" - depends on !X86_VOYAGER - help + ---help--- This changes the kernel so it can modify itself when it is run under a hypervisor, potentially improving performance significantly over full virtualization. However, when run without a hypervisor @@ -464,51 +504,51 @@ config PARAVIRT_CLOCK endif config PARAVIRT_DEBUG - bool "paravirt-ops debugging" - depends on PARAVIRT && DEBUG_KERNEL - help - Enable to debug paravirt_ops internals. Specifically, BUG if - a paravirt_op is missing when it is called. + bool "paravirt-ops debugging" + depends on PARAVIRT && DEBUG_KERNEL + ---help--- + Enable to debug paravirt_ops internals. Specifically, BUG if + a paravirt_op is missing when it is called. config MEMTEST bool "Memtest" - help + ---help--- This option adds a kernel parameter 'memtest', which allows memtest to be set. - memtest=0, mean disabled; -- default - memtest=1, mean do 1 test pattern; - ... - memtest=4, mean do 4 test patterns. + memtest=0, mean disabled; -- default + memtest=1, mean do 1 test pattern; + ... + memtest=4, mean do 4 test patterns. If you are unsure how to answer this question, answer N. config X86_SUMMIT_NUMA def_bool y - depends on X86_32 && NUMA && X86_GENERICARCH + depends on X86_32 && NUMA && X86_32_NON_STANDARD config X86_CYCLONE_TIMER def_bool y - depends on X86_GENERICARCH + depends on X86_32_NON_STANDARD source "arch/x86/Kconfig.cpu" config HPET_TIMER def_bool X86_64 prompt "HPET Timer Support" if X86_32 - help - Use the IA-PC HPET (High Precision Event Timer) to manage - time in preference to the PIT and RTC, if a HPET is - present. - HPET is the next generation timer replacing legacy 8254s. - The HPET provides a stable time base on SMP - systems, unlike the TSC, but it is more expensive to access, - as it is off-chip. You can find the HPET spec at - <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>. + ---help--- + Use the IA-PC HPET (High Precision Event Timer) to manage + time in preference to the PIT and RTC, if a HPET is + present. + HPET is the next generation timer replacing legacy 8254s. + The HPET provides a stable time base on SMP + systems, unlike the TSC, but it is more expensive to access, + as it is off-chip. You can find the HPET spec at + <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>. - You can safely choose Y here. However, HPET will only be - activated if the platform and the BIOS support this feature. - Otherwise the 8254 will be used for timing services. + You can safely choose Y here. However, HPET will only be + activated if the platform and the BIOS support this feature. + Otherwise the 8254 will be used for timing services. - Choose N to continue using the legacy 8254 timer. + Choose N to continue using the legacy 8254 timer. config HPET_EMULATE_RTC def_bool y @@ -519,7 +559,7 @@ config HPET_EMULATE_RTC config DMI default y bool "Enable DMI scanning" if EMBEDDED - help + ---help--- Enabled scanning of DMI to identify machine quirks. Say Y here unless you have verified that your setup is not affected by entries in the DMI blacklist. Required by PNP @@ -531,7 +571,7 @@ config GART_IOMMU select SWIOTLB select AGP depends on X86_64 && PCI - help + ---help--- Support for full DMA access of devices with 32bit memory access only on systems with more than 3GB. This is usually needed for USB, sound, many IDE/SATA chipsets and some other devices. @@ -546,7 +586,7 @@ config CALGARY_IOMMU bool "IBM Calgary IOMMU support" select SWIOTLB depends on X86_64 && PCI && EXPERIMENTAL - help + ---help--- Support for hardware IOMMUs in IBM's xSeries x366 and x460 systems. Needed to run systems with more than 3GB of memory properly with 32-bit PCI devices that do not support DAC @@ -564,7 +604,7 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT def_bool y prompt "Should Calgary be enabled by default?" depends on CALGARY_IOMMU - help + ---help--- Should Calgary be enabled by default? if you choose 'y', Calgary will be used (if it exists). If you choose 'n', Calgary will not be used even if it exists. If you choose 'n' and would like to use @@ -576,7 +616,7 @@ config AMD_IOMMU select SWIOTLB select PCI_MSI depends on X86_64 && PCI && ACPI - help + ---help--- With this option you can enable support for AMD IOMMU hardware in your system. An IOMMU is a hardware component which provides remapping of DMA memory accesses from devices. With an AMD IOMMU you @@ -591,7 +631,7 @@ config AMD_IOMMU_STATS bool "Export AMD IOMMU statistics to debugfs" depends on AMD_IOMMU select DEBUG_FS - help + ---help--- This option enables code in the AMD IOMMU driver to collect various statistics about whats happening in the driver and exports that information to userspace via debugfs. @@ -600,7 +640,7 @@ config AMD_IOMMU_STATS # need this always selected by IOMMU for the VIA workaround config SWIOTLB def_bool y if X86_64 - help + ---help--- Support for software bounce buffers used on x86-64 systems which don't have a hardware IOMMU (e.g. the current generation of Intel's x86-64 CPUs). Using this PCI devices which can only @@ -618,7 +658,7 @@ config MAXSMP depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL select CPUMASK_OFFSTACK default n - help + ---help--- Configure maximum number of CPUS and NUMA Nodes for this architecture. If unsure, say N. @@ -629,7 +669,7 @@ config NR_CPUS default "4096" if MAXSMP default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000) default "8" if SMP - help + ---help--- This allows you to specify the maximum number of CPUs which this kernel will support. The maximum supported value is 512 and the minimum value which makes sense is 2. @@ -640,7 +680,7 @@ config NR_CPUS config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" depends on X86_HT - help + ---help--- SMT scheduler support improves the CPU scheduler's decision making when dealing with Intel Pentium 4 chips with HyperThreading at a cost of slightly increased overhead in some places. If unsure say @@ -650,7 +690,7 @@ config SCHED_MC def_bool y prompt "Multi-core scheduler support" depends on X86_HT - help + ---help--- Multi-core scheduler support improves the CPU scheduler's decision making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. @@ -659,8 +699,8 @@ source "kernel/Kconfig.preempt" config X86_UP_APIC bool "Local APIC support on uniprocessors" - depends on X86_32 && !SMP && !(X86_VOYAGER || X86_GENERICARCH) - help + depends on X86_32 && !SMP && !X86_32_NON_STANDARD + ---help--- A local APIC (Advanced Programmable Interrupt Controller) is an integrated interrupt controller in the CPU. If you have a single-CPU system which has a processor with a local APIC, you can say Y here to @@ -673,7 +713,7 @@ config X86_UP_APIC config X86_UP_IOAPIC bool "IO-APIC support on uniprocessors" depends on X86_UP_APIC - help + ---help--- An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an SMP-capable replacement for PC-style interrupt controllers. Most SMP systems and many recent uniprocessor systems have one. @@ -684,11 +724,11 @@ config X86_UP_IOAPIC config X86_LOCAL_APIC def_bool y - depends on X86_64 || (X86_32 && (X86_UP_APIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH)) + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC config X86_IO_APIC def_bool y - depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH)) + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC config X86_VISWS_APIC def_bool y @@ -698,7 +738,7 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS bool "Reroute for broken boot IRQs" default n depends on X86_IO_APIC - help + ---help--- This option enables a workaround that fixes a source of spurious interrupts. This is recommended when threaded interrupt handling is used on systems where the generation of @@ -720,7 +760,6 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS config X86_MCE bool "Machine Check Exception" - depends on !X86_VOYAGER ---help--- Machine Check Exception support allows the processor to notify the kernel if it detects a problem (e.g. overheating, component failure). @@ -739,7 +778,7 @@ config X86_MCE_INTEL def_bool y prompt "Intel MCE features" depends on X86_64 && X86_MCE && X86_LOCAL_APIC - help + ---help--- Additional support for intel specific MCE features such as the thermal monitor. @@ -747,14 +786,19 @@ config X86_MCE_AMD def_bool y prompt "AMD MCE features" depends on X86_64 && X86_MCE && X86_LOCAL_APIC - help + ---help--- Additional support for AMD specific MCE features such as the DRAM Error Threshold. +config X86_MCE_THRESHOLD + depends on X86_MCE_AMD || X86_MCE_INTEL + bool + default y + config X86_MCE_NONFATAL tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4" depends on X86_32 && X86_MCE - help + ---help--- Enabling this feature starts a timer that triggers every 5 seconds which will look at the machine check registers to see if anything happened. Non-fatal problems automatically get corrected (but still logged). @@ -767,7 +811,7 @@ config X86_MCE_NONFATAL config X86_MCE_P4THERMAL bool "check for P4 thermal throttling interrupt." depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) - help + ---help--- Enabling this feature will cause a message to be printed when the P4 enters thermal throttling. @@ -775,11 +819,11 @@ config VM86 bool "Enable VM86 support" if EMBEDDED default y depends on X86_32 - help - This option is required by programs like DOSEMU to run 16-bit legacy + ---help--- + This option is required by programs like DOSEMU to run 16-bit legacy code on X86 processors. It also may be needed by software like - XFree86 to initialize some video cards via BIOS. Disabling this - option saves about 6k. + XFree86 to initialize some video cards via BIOS. Disabling this + option saves about 6k. config TOSHIBA tristate "Toshiba Laptop support" @@ -853,33 +897,33 @@ config MICROCODE module will be called microcode. config MICROCODE_INTEL - bool "Intel microcode patch loading support" - depends on MICROCODE - default MICROCODE - select FW_LOADER - --help--- - This options enables microcode patch loading support for Intel - processors. - - For latest news and information on obtaining all the required - Intel ingredients for this driver, check: - <http://www.urbanmyth.org/microcode/>. + bool "Intel microcode patch loading support" + depends on MICROCODE + default MICROCODE + select FW_LOADER + ---help--- + This options enables microcode patch loading support for Intel + processors. + + For latest news and information on obtaining all the required + Intel ingredients for this driver, check: + <http://www.urbanmyth.org/microcode/>. config MICROCODE_AMD - bool "AMD microcode patch loading support" - depends on MICROCODE - select FW_LOADER - --help--- - If you select this option, microcode patch loading support for AMD - processors will be enabled. + bool "AMD microcode patch loading support" + depends on MICROCODE + select FW_LOADER + ---help--- + If you select this option, microcode patch loading support for AMD + processors will be enabled. - config MICROCODE_OLD_INTERFACE +config MICROCODE_OLD_INTERFACE def_bool y depends on MICROCODE config X86_MSR tristate "/dev/cpu/*/msr - Model-specific register support" - help + ---help--- This device gives privileged processes access to the x86 Model-Specific Registers (MSRs). It is a character device with major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr. @@ -888,12 +932,18 @@ config X86_MSR config X86_CPUID tristate "/dev/cpu/*/cpuid - CPU information support" - help + ---help--- This device gives processes access to the x86 CPUID instruction to be executed on a specific processor. It is a character device with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to /dev/cpu/31/cpuid. +config X86_CPU_DEBUG + tristate "/sys/kernel/debug/x86/cpu/* - CPU Debug support" + ---help--- + If you select this option, this will provide various x86 CPUs + information through debugfs. + choice prompt "High Memory Support" default HIGHMEM4G if !X86_NUMAQ @@ -940,7 +990,7 @@ config NOHIGHMEM config HIGHMEM4G bool "4GB" depends on !X86_NUMAQ - help + ---help--- Select this if you have a 32-bit processor and between 1 and 4 gigabytes of physical RAM. @@ -948,7 +998,7 @@ config HIGHMEM64G bool "64GB" depends on !M386 && !M486 select X86_PAE - help + ---help--- Select this if you have a 32-bit processor and more than 4 gigabytes of physical RAM. @@ -959,7 +1009,7 @@ choice prompt "Memory split" if EMBEDDED default VMSPLIT_3G depends on X86_32 - help + ---help--- Select the desired split between kernel and user memory. If the address range available to the kernel is less than the @@ -1005,20 +1055,20 @@ config HIGHMEM config X86_PAE bool "PAE (Physical Address Extension) Support" depends on X86_32 && !HIGHMEM4G - help + ---help--- PAE is required for NX support, and furthermore enables larger swapspace support for non-overcommit purposes. It has the cost of more pagetable lookup overhead, and also consumes more pagetable space per process. config ARCH_PHYS_ADDR_T_64BIT - def_bool X86_64 || X86_PAE + def_bool X86_64 || X86_PAE config DIRECT_GBPAGES bool "Enable 1GB pages for kernel pagetables" if EMBEDDED default y depends on X86_64 - help + ---help--- Allow the kernel linear mapping to use 1GB pages on CPUs that support it. This can improve the kernel's performance a tiny bit by reducing TLB pressure. If in doubt, say "Y". @@ -1028,9 +1078,8 @@ config NUMA bool "Numa Memory Allocation and Scheduler Support" depends on SMP depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL) - default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) - help + ---help--- Enable NUMA (Non Uniform Memory Access) support. The kernel will try to allocate memory used by a CPU on the @@ -1053,19 +1102,19 @@ config K8_NUMA def_bool y prompt "Old style AMD Opteron NUMA detection" depends on X86_64 && NUMA && PCI - help - Enable K8 NUMA node topology detection. You should say Y here if - you have a multi processor AMD K8 system. This uses an old - method to read the NUMA configuration directly from the builtin - Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA - instead, which also takes priority if both are compiled in. + ---help--- + Enable K8 NUMA node topology detection. You should say Y here if + you have a multi processor AMD K8 system. This uses an old + method to read the NUMA configuration directly from the builtin + Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA + instead, which also takes priority if both are compiled in. config X86_64_ACPI_NUMA def_bool y prompt "ACPI NUMA detection" depends on X86_64 && NUMA && ACPI && PCI select ACPI_NUMA - help + ---help--- Enable ACPI SRAT based node topology detection. # Some NUMA nodes have memory ranges that span @@ -1080,24 +1129,24 @@ config NODES_SPAN_OTHER_NODES config NUMA_EMU bool "NUMA emulation" depends on X86_64 && NUMA - help + ---help--- Enable NUMA emulation. A flat machine will be split into virtual nodes when booted with "numa=fake=N", where N is the number of nodes. This is only useful for debugging. config NODES_SHIFT int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP - range 1 9 if X86_64 + range 1 9 default "9" if MAXSMP default "6" if X86_64 default "4" if X86_NUMAQ default "3" depends on NEED_MULTIPLE_NODES - help + ---help--- Specify the maximum number of NUMA Nodes available on the target - system. Increases memory reserved to accomodate various tables. + system. Increases memory reserved to accommodate various tables. -config HAVE_ARCH_BOOTMEM_NODE +config HAVE_ARCH_BOOTMEM def_bool y depends on X86_32 && NUMA @@ -1131,7 +1180,7 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_SPARSEMEM_ENABLE def_bool y - depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_GENERICARCH + depends on X86_64 || NUMA || (EXPERIMENTAL && X86_32) || X86_32_NON_STANDARD select SPARSEMEM_STATIC if X86_32 select SPARSEMEM_VMEMMAP_ENABLE if X86_64 @@ -1148,61 +1197,61 @@ source "mm/Kconfig" config HIGHPTE bool "Allocate 3rd-level pagetables from highmem" depends on X86_32 && (HIGHMEM4G || HIGHMEM64G) - help + ---help--- The VM uses one page table entry for each page of physical memory. For systems with a lot of RAM, this can be wasteful of precious low memory. Setting this option will put user-space page table entries in high memory. config X86_CHECK_BIOS_CORRUPTION - bool "Check for low memory corruption" - help - Periodically check for memory corruption in low memory, which - is suspected to be caused by BIOS. Even when enabled in the - configuration, it is disabled at runtime. Enable it by - setting "memory_corruption_check=1" on the kernel command - line. By default it scans the low 64k of memory every 60 - seconds; see the memory_corruption_check_size and - memory_corruption_check_period parameters in - Documentation/kernel-parameters.txt to adjust this. - - When enabled with the default parameters, this option has - almost no overhead, as it reserves a relatively small amount - of memory and scans it infrequently. It both detects corruption - and prevents it from affecting the running system. - - It is, however, intended as a diagnostic tool; if repeatable - BIOS-originated corruption always affects the same memory, - you can use memmap= to prevent the kernel from using that - memory. + bool "Check for low memory corruption" + ---help--- + Periodically check for memory corruption in low memory, which + is suspected to be caused by BIOS. Even when enabled in the + configuration, it is disabled at runtime. Enable it by + setting "memory_corruption_check=1" on the kernel command + line. By default it scans the low 64k of memory every 60 + seconds; see the memory_corruption_check_size and + memory_corruption_check_period parameters in + Documentation/kernel-parameters.txt to adjust this. + + When enabled with the default parameters, this option has + almost no overhead, as it reserves a relatively small amount + of memory and scans it infrequently. It both detects corruption + and prevents it from affecting the running system. + + It is, however, intended as a diagnostic tool; if repeatable + BIOS-originated corruption always affects the same memory, + you can use memmap= to prevent the kernel from using that + memory. config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK - bool "Set the default setting of memory_corruption_check" + bool "Set the default setting of memory_corruption_check" depends on X86_CHECK_BIOS_CORRUPTION default y - help - Set whether the default state of memory_corruption_check is - on or off. + ---help--- + Set whether the default state of memory_corruption_check is + on or off. config X86_RESERVE_LOW_64K - bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen" + bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen" default y - help - Reserve the first 64K of physical RAM on BIOSes that are known - to potentially corrupt that memory range. A numbers of BIOSes are - known to utilize this area during suspend/resume, so it must not - be used by the kernel. + ---help--- + Reserve the first 64K of physical RAM on BIOSes that are known + to potentially corrupt that memory range. A numbers of BIOSes are + known to utilize this area during suspend/resume, so it must not + be used by the kernel. - Set this to N if you are absolutely sure that you trust the BIOS - to get all its memory reservations and usages right. + Set this to N if you are absolutely sure that you trust the BIOS + to get all its memory reservations and usages right. - If you have doubts about the BIOS (e.g. suspend/resume does not - work or there's kernel crashes after certain hardware hotplug - events) and it's not AMI or Phoenix, then you might want to enable - X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical - corruption patterns. + If you have doubts about the BIOS (e.g. suspend/resume does not + work or there's kernel crashes after certain hardware hotplug + events) and it's not AMI or Phoenix, then you might want to enable + X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical + corruption patterns. - Say Y if unsure. + Say Y if unsure. config MATH_EMULATION bool @@ -1268,12 +1317,12 @@ config MTRR_SANITIZER def_bool y prompt "MTRR cleanup support" depends on MTRR - help + ---help--- Convert MTRR layout from continuous to discrete, so X drivers can add writeback entries. Can be disabled with disable_mtrr_cleanup on the kernel command line. - The largest mtrr entry size for a continous block can be set with + The largest mtrr entry size for a continuous block can be set with mtrr_chunk_size. If unsure, say Y. @@ -1283,7 +1332,7 @@ config MTRR_SANITIZER_ENABLE_DEFAULT range 0 1 default "0" depends on MTRR_SANITIZER - help + ---help--- Enable mtrr cleanup default value config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT @@ -1291,7 +1340,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT range 0 7 default "1" depends on MTRR_SANITIZER - help + ---help--- mtrr cleanup spare entries default, it can be changed via mtrr_spare_reg_nr=N on the kernel command line. @@ -1299,7 +1348,7 @@ config X86_PAT bool prompt "x86 PAT support" depends on MTRR - help + ---help--- Use PAT attributes to setup page level cache control. PATs are the modern equivalents of MTRRs and are much more @@ -1314,20 +1363,20 @@ config EFI bool "EFI runtime service support" depends on ACPI ---help--- - This enables the kernel to use EFI runtime services that are - available (such as the EFI variable services). + This enables the kernel to use EFI runtime services that are + available (such as the EFI variable services). - This option is only useful on systems that have EFI firmware. - In addition, you should use the latest ELILO loader available - at <http://elilo.sourceforge.net> in order to take advantage - of EFI runtime services. However, even with this option, the - resultant kernel should continue to boot on existing non-EFI - platforms. + This option is only useful on systems that have EFI firmware. + In addition, you should use the latest ELILO loader available + at <http://elilo.sourceforge.net> in order to take advantage + of EFI runtime services. However, even with this option, the + resultant kernel should continue to boot on existing non-EFI + platforms. config SECCOMP def_bool y prompt "Enable seccomp to safely compute untrusted bytecode" - help + ---help--- This kernel feature is useful for number crunching applications that may need to compute untrusted bytecode during their execution. By using pipes or other transports made available to @@ -1340,13 +1389,16 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config CC_STACKPROTECTOR_ALL + bool + config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - depends on X86_64 && EXPERIMENTAL && BROKEN - help - This option turns on the -fstack-protector GCC feature. This - feature puts, at the beginning of critical functions, a canary - value on the stack just before the return address, and validates + select CC_STACKPROTECTOR_ALL + ---help--- + This option turns on the -fstack-protector GCC feature. This + feature puts, at the beginning of functions, a canary value on + the stack just before the return address, and validates the value just before actually returning. Stack based buffer overflows (that need to overwrite this return address) now also overwrite the canary, which gets detected and the attack is then @@ -1354,22 +1406,14 @@ config CC_STACKPROTECTOR This feature requires gcc version 4.2 or above, or a distribution gcc with the feature backported. Older versions are automatically - detected and for those versions, this configuration option is ignored. - -config CC_STACKPROTECTOR_ALL - bool "Use stack-protector for all functions" - depends on CC_STACKPROTECTOR - help - Normally, GCC only inserts the canary value protection for - functions that use large-ish on-stack buffers. By enabling - this option, GCC will be asked to do this for ALL functions. + detected and for those versions, this configuration option is + ignored. (and a warning is printed during bootup) source kernel/Kconfig.hz config KEXEC bool "kexec system call" - depends on X86_BIOS_REBOOT - help + ---help--- kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot but it is independent of the system firmware. And like a reboot @@ -1386,7 +1430,7 @@ config KEXEC config CRASH_DUMP bool "kernel crash dumps" depends on X86_64 || (X86_32 && HIGHMEM) - help + ---help--- Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels which are loaded in the main kernel with kexec-tools into @@ -1400,8 +1444,8 @@ config CRASH_DUMP config KEXEC_JUMP bool "kexec jump (EXPERIMENTAL)" depends on EXPERIMENTAL - depends on KEXEC && HIBERNATION && X86_32 - help + depends on KEXEC && HIBERNATION + ---help--- Jump between original kernel and kexeced kernel and invoke code in physical address mode via KEXEC @@ -1410,7 +1454,7 @@ config PHYSICAL_START default "0x1000000" if X86_NUMAQ default "0x200000" if X86_64 default "0x100000" - help + ---help--- This gives the physical address where the kernel is loaded. If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then @@ -1451,7 +1495,7 @@ config PHYSICAL_START config RELOCATABLE bool "Build a relocatable kernel (EXPERIMENTAL)" depends on EXPERIMENTAL - help + ---help--- This builds a kernel image that retains relocation information so it can be loaded someplace besides the default 1MB. The relocations tend to make the kernel binary about 10% larger, @@ -1471,7 +1515,7 @@ config PHYSICAL_ALIGN default "0x100000" if X86_32 default "0x200000" if X86_64 range 0x2000 0x400000 - help + ---help--- This value puts the alignment restrictions on physical address where kernel is loaded and run from. Kernel is compiled for an address which meets above alignment restriction. @@ -1492,7 +1536,7 @@ config PHYSICAL_ALIGN config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" - depends on SMP && HOTPLUG && !X86_VOYAGER + depends on SMP && HOTPLUG ---help--- Say Y here to allow turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1504,7 +1548,7 @@ config COMPAT_VDSO def_bool y prompt "Compat VDSO support" depends on X86_32 || IA32_EMULATION - help + ---help--- Map the 32-bit VDSO to the predictable old-style address too. ---help--- Say N here if you are running a sufficiently recent glibc @@ -1516,7 +1560,7 @@ config COMPAT_VDSO config CMDLINE_BOOL bool "Built-in kernel command line" default n - help + ---help--- Allow for specifying boot arguments to the kernel at build time. On some systems (e.g. embedded ones), it is necessary or convenient to provide some or all of the @@ -1534,7 +1578,7 @@ config CMDLINE string "Built-in kernel command string" depends on CMDLINE_BOOL default "" - help + ---help--- Enter arguments here that should be compiled into the kernel image and used at boot time. If the boot loader provides a command line at boot time, it is appended to this string to @@ -1551,7 +1595,7 @@ config CMDLINE_OVERRIDE bool "Built-in command line overrides boot loader arguments" default n depends on CMDLINE_BOOL - help + ---help--- Set this option to 'Y' to have the kernel ignore the boot loader command line, and use ONLY the built-in command line. @@ -1573,7 +1617,6 @@ config HAVE_ARCH_EARLY_PFN_TO_NID depends on NUMA menu "Power management and ACPI options" - depends on !X86_VOYAGER config ARCH_HIBERNATION_HEADER def_bool y @@ -1651,7 +1694,7 @@ if APM config APM_IGNORE_USER_SUSPEND bool "Ignore USER SUSPEND" - help + ---help--- This option will ignore USER SUSPEND requests. On machines with a compliant APM BIOS, you want to say N. However, on the NEC Versa M series notebooks, it is necessary to say Y because of a BIOS bug. @@ -1675,7 +1718,7 @@ config APM_DO_ENABLE config APM_CPU_IDLE bool "Make CPU Idle calls when idle" - help + ---help--- Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop. On some machines, this can activate improved power savings, such as a slowed CPU clock rate, when the machine is idle. These idle calls @@ -1686,7 +1729,7 @@ config APM_CPU_IDLE config APM_DISPLAY_BLANK bool "Enable console blanking using APM" - help + ---help--- Enable console blanking using the APM. Some laptops can use this to turn off the LCD backlight when the screen blanker of the Linux virtual console blanks the screen. Note that this is only used by @@ -1699,7 +1742,7 @@ config APM_DISPLAY_BLANK config APM_ALLOW_INTS bool "Allow interrupts during APM BIOS calls" - help + ---help--- Normally we disable external interrupts while we are making calls to the APM BIOS as a measure to lessen the effects of a badly behaving BIOS implementation. The BIOS should reenable interrupts if it @@ -1724,7 +1767,7 @@ config PCI bool "PCI support" default y select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) - help + ---help--- Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or @@ -1794,7 +1837,7 @@ config PCI_MMCONFIG config DMAR bool "Support for DMA Remapping Devices (EXPERIMENTAL)" - depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL + depends on PCI_MSI && ACPI && EXPERIMENTAL help DMA remapping (DMAR) devices support enables independent address translations for Direct Memory Access (DMA) from devices. @@ -1817,29 +1860,30 @@ config DMAR_GFX_WA def_bool y prompt "Support for Graphics workaround" depends on DMAR - help - Current Graphics drivers tend to use physical address - for DMA and avoid using DMA APIs. Setting this config - option permits the IOMMU driver to set a unity map for - all the OS-visible memory. Hence the driver can continue - to use physical addresses for DMA. + ---help--- + Current Graphics drivers tend to use physical address + for DMA and avoid using DMA APIs. Setting this config + option permits the IOMMU driver to set a unity map for + all the OS-visible memory. Hence the driver can continue + to use physical addresses for DMA. config DMAR_FLOPPY_WA def_bool y depends on DMAR - help - Floppy disk drivers are know to bypass DMA API calls - thereby failing to work when IOMMU is enabled. This - workaround will setup a 1:1 mapping for the first - 16M to make floppy (an ISA device) work. + ---help--- + Floppy disk drivers are know to bypass DMA API calls + thereby failing to work when IOMMU is enabled. This + workaround will setup a 1:1 mapping for the first + 16M to make floppy (an ISA device) work. config INTR_REMAP bool "Support for Interrupt Remapping (EXPERIMENTAL)" depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL - help - Supports Interrupt remapping for IO-APIC and MSI devices. - To use x2apic mode in the CPU's which support x2APIC enhancements or - to support platforms with CPU's having > 8 bit APIC ID, say Y. + select X86_X2APIC + ---help--- + Supports Interrupt remapping for IO-APIC and MSI devices. + To use x2apic mode in the CPU's which support x2APIC enhancements or + to support platforms with CPU's having > 8 bit APIC ID, say Y. source "drivers/pci/pcie/Kconfig" @@ -1853,8 +1897,7 @@ if X86_32 config ISA bool "ISA support" - depends on !X86_VOYAGER - help + ---help--- Find out whether you have ISA slots on your motherboard. ISA is the name of a bus system, i.e. the way the CPU talks to the other stuff inside your box. Other bus systems are PCI, EISA, MicroChannel @@ -1880,9 +1923,8 @@ config EISA source "drivers/eisa/Kconfig" config MCA - bool "MCA support" if !X86_VOYAGER - default y if X86_VOYAGER - help + bool "MCA support" + ---help--- MicroChannel Architecture is found in some IBM PS/2 machines and laptops. It is a bus system similar to PCI or ISA. See <file:Documentation/mca.txt> (and especially the web page given @@ -1892,8 +1934,7 @@ source "drivers/mca/Kconfig" config SCx200 tristate "NatSemi SCx200 support" - depends on !X86_VOYAGER - help + ---help--- This provides basic support for National Semiconductor's (now AMD's) Geode processors. The driver probes for the PCI-IDs of several on-chip devices, so its a good dependency @@ -1905,7 +1946,7 @@ config SCx200HR_TIMER tristate "NatSemi SCx200 27MHz High-Resolution Timer Support" depends on SCx200 && GENERIC_TIME default y - help + ---help--- This driver provides a clocksource built upon the on-chip 27MHz high-resolution timer. Its also a workaround for NSC Geode SC-1100's buggy TSC, which loses time when the @@ -1916,7 +1957,7 @@ config GEODE_MFGPT_TIMER def_bool y prompt "Geode Multi-Function General Purpose Timer (MFGPT) events" depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS - help + ---help--- This driver provides a clock event source based on the MFGPT timer(s) in the CS5535 and CS5536 companion chip for the geode. MFGPTs have a better resolution and max interval than the @@ -1925,7 +1966,7 @@ config GEODE_MFGPT_TIMER config OLPC bool "One Laptop Per Child support" default n - help + ---help--- Add support for detecting the unique features of the OLPC XO hardware. @@ -1950,16 +1991,16 @@ config IA32_EMULATION bool "IA32 Emulation" depends on X86_64 select COMPAT_BINFMT_ELF - help + ---help--- Include code to run 32-bit programs under a 64-bit kernel. You should likely turn this on, unless you're 100% sure that you don't have any 32-bit programs left. config IA32_AOUT - tristate "IA32 a.out support" - depends on IA32_EMULATION - help - Support old a.out binaries in the 32bit emulation. + tristate "IA32 a.out support" + depends on IA32_EMULATION + ---help--- + Support old a.out binaries in the 32bit emulation. config COMPAT def_bool y |