diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 115 |
1 files changed, 84 insertions, 31 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ac22bb7719f..0f44add3e0b 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -19,6 +19,8 @@ config X86_64 config X86 def_bool y select HAVE_AOUT if X86_32 + select HAVE_READQ + select HAVE_WRITEQ select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_IDE select HAVE_OPROFILE @@ -29,11 +31,14 @@ config X86 select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) select HAVE_ARCH_KGDB if !X86_VOYAGER select HAVE_ARCH_TRACEHOOK select HAVE_GENERIC_DMA_COHERENT if X86_32 select HAVE_EFFICIENT_UNALIGNED_ACCESS + select USER_STACKTRACE_SUPPORT config ARCH_DEFCONFIG string @@ -87,6 +92,10 @@ config GENERIC_IOMAP config GENERIC_BUG def_bool y depends on BUG + select GENERIC_BUG_RELATIVE_POINTERS if X86_64 + +config GENERIC_BUG_RELATIVE_POINTERS + bool config GENERIC_HWEIGHT def_bool y @@ -238,25 +247,39 @@ config X86_HAS_BOOT_CPU_ID def_bool y depends on X86_VOYAGER +config SPARSE_IRQ + bool "Support sparse irq numbering" + depends on PCI_MSI || HT_IRQ + help + This enables support for sparse irqs. This is useful for distro + kernels that want to define a high CONFIG_NR_CPUS value but still + want to have low kernel memory footprint on smaller machines. + + ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread + out the irq_desc[] array in a more NUMA-friendly way. ) + + If you don't know what to do here, say N. + +config NUMA_MIGRATE_IRQ_DESC + bool "Move irq desc when changing irq smp_affinity" + depends on SPARSE_IRQ && NUMA + default n + help + This enables moving irq_desc to cpu/node that irq will use handled. + + If you don't know what to do here, say N. + config X86_FIND_SMP_CONFIG def_bool y depends on X86_MPPARSE || X86_VOYAGER -if ACPI config X86_MPPARSE - def_bool y - bool "Enable MPS table" + bool "Enable MPS table" if ACPI + default y depends on X86_LOCAL_APIC help For old smp systems that do not have proper acpi support. Newer systems (esp with 64bit cpus) with acpi support, MADT and DSDT will override it -endif - -if !ACPI -config X86_MPPARSE - def_bool y - depends on X86_LOCAL_APIC -endif choice prompt "Subarchitecture Type" @@ -367,10 +390,10 @@ config X86_RDC321X as R-8610-(G). If you don't have one of these chips, you should say N here. -config SCHED_NO_NO_OMIT_FRAME_POINTER +config SCHED_OMIT_FRAME_POINTER def_bool y prompt "Single-depth WCHAN output" - depends on X86_32 + depends on X86 help Calculate simpler /proc/<PID>/wchan values. If this option is disabled then wchan values will recurse back to the @@ -465,10 +488,6 @@ config X86_CYCLONE_TIMER def_bool y depends on X86_GENERICARCH -config ES7000_CLUSTERED_APIC - def_bool y - depends on SMP && X86_ES7000 && MPENTIUMIII - source "arch/x86/Kconfig.cpu" config HPET_TIMER @@ -482,7 +501,7 @@ config HPET_TIMER The HPET provides a stable time base on SMP systems, unlike the TSC, but it is more expensive to access, as it is off-chip. You can find the HPET spec at - <http://www.intel.com/hardwaredesign/hpetspec.htm>. + <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>. You can safely choose Y here. However, HPET will only be activated if the platform and the BIOS support this feature. @@ -569,7 +588,7 @@ config AMD_IOMMU # need this always selected by IOMMU for the VIA workaround config SWIOTLB - bool + def_bool y if X86_64 help Support for software bounce buffers used on x86-64 systems which don't have a hardware IOMMU (e.g. the current generation @@ -660,6 +679,30 @@ config X86_VISWS_APIC def_bool y depends on X86_32 && X86_VISWS +config X86_REROUTE_FOR_BROKEN_BOOT_IRQS + bool "Reroute for broken boot IRQs" + default n + depends on X86_IO_APIC + help + This option enables a workaround that fixes a source of + spurious interrupts. This is recommended when threaded + interrupt handling is used on systems where the generation of + superfluous "boot interrupts" cannot be disabled. + + Some chipsets generate a legacy INTx "boot IRQ" when the IRQ + entry in the chipset's IO-APIC is masked (as, e.g. the RT + kernel does during interrupt handling). On chipsets where this + boot IRQ generation cannot be disabled, this workaround keeps + the original IRQ line masked so that only the equivalent "boot + IRQ" is delivered to the CPUs. The workaround also tells the + kernel to set up the IRQ handler on the boot IRQ line. In this + way only one interrupt is delivered to the kernel. Otherwise + the spurious second interrupt may cause the kernel to bring + down (vital) interrupt lines. + + Only affects "broken" chipsets. Interrupt sharing may be + increased on these systems. + config X86_MCE bool "Machine Check Exception" depends on !X86_VOYAGER @@ -956,24 +999,37 @@ config X86_PAE config ARCH_PHYS_ADDR_T_64BIT def_bool X86_64 || X86_PAE +config DIRECT_GBPAGES + bool "Enable 1GB pages for kernel pagetables" if EMBEDDED + default y + depends on X86_64 + help + Allow the kernel linear mapping to use 1GB pages on CPUs that + support it. This can improve the kernel's performance a tiny bit by + reducing TLB pressure. If in doubt, say "Y". + # Common NUMA Features config NUMA - bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)" + bool "Numa Memory Allocation and Scheduler Support" depends on SMP depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL) default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) help Enable NUMA (Non Uniform Memory Access) support. + The kernel will try to allocate memory used by a CPU on the local memory controller of the CPU and add some more NUMA awareness to the kernel. - For 32-bit this is currently highly experimental and should be only - used for kernel development. It might also cause boot failures. - For 64-bit this is recommended on all multiprocessor Opteron systems. - If the system is EM64T, you should say N unless your system is - EM64T NUMA. + For 64-bit this is recommended if the system is Intel Core i7 + (or later), AMD Opteron, or EM64T NUMA. + + For 32-bit this is only needed on (rare) 32-bit-only platforms + that support NUMA topologies, such as NUMAQ / Summit, or if you + boot a 32-bit kernel on a 64-bit NUMA platform. + + Otherwise, you should say N. comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI) @@ -1493,6 +1549,10 @@ config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y depends on X86_64 || (X86_32 && HIGHMEM) +config ARCH_ENABLE_MEMORY_HOTREMOVE + def_bool y + depends on MEMORY_HOTPLUG + config HAVE_ARCH_EARLY_PFN_TO_NID def_bool X86_64 depends on NUMA @@ -1632,13 +1692,6 @@ config APM_ALLOW_INTS many of the newer IBM Thinkpads. If you experience hangs when you suspend, try setting this to Y. Otherwise, say N. -config APM_REAL_MODE_POWER_OFF - bool "Use real mode APM BIOS call to power off" - help - Use real mode APM BIOS calls to switch off the computer. This is - a work-around for a number of buggy BIOSes. Switch this option on if - your computer crashes instead of powering off properly. - endif # APM source "arch/x86/kernel/cpu/cpufreq/Kconfig" |