diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 73 |
1 files changed, 39 insertions, 34 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 3cb5bb02172..6f77afa6bca 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -53,12 +53,16 @@ config X86 select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO select HAVE_HW_BREAKPOINT + select HAVE_MIXED_BREAKPOINTS_REGS select PERF_EVENTS select HAVE_PERF_EVENTS_NMI select ANON_INODES select HAVE_ARCH_KMEMCHECK select HAVE_USER_RETURN_NOTIFIER +config INSTRUCTION_DECODER + def_bool (KPROBES || PERF_EVENTS) + config OUTPUT_FORMAT string default "elf32-i386" if X86_32 @@ -106,6 +110,9 @@ config SBUS config NEED_DMA_MAP_STATE def_bool (X86_64 || DMAR || DMA_API_DEBUG) +config NEED_SG_DMA_LENGTH + def_bool y + config GENERIC_ISA_DMA def_bool y @@ -198,20 +205,17 @@ config HAVE_INTEL_TXT # Use the generic interrupt handling code in kernel/irq/: config GENERIC_HARDIRQS - bool - default y + def_bool y config GENERIC_HARDIRQS_NO__DO_IRQ def_bool y config GENERIC_IRQ_PROBE - bool - default y + def_bool y config GENERIC_PENDING_IRQ - bool + def_bool y depends on GENERIC_HARDIRQS && SMP - default y config USE_GENERIC_SMP_HELPERS def_bool y @@ -226,19 +230,22 @@ config X86_64_SMP depends on X86_64 && SMP config X86_HT - bool + def_bool y depends on SMP - default y config X86_TRAMPOLINE - bool + def_bool y depends on SMP || (64BIT && ACPI_SLEEP) - default y config X86_32_LAZY_GS def_bool y depends on X86_32 && !CC_STACKPROTECTOR +config ARCH_HWEIGHT_CFLAGS + string + default "-fcall-saved-ecx -fcall-saved-edx" if X86_32 + default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64 + config KTIME_SCALAR def_bool X86_32 source "init/Kconfig" @@ -448,7 +455,7 @@ config X86_NUMAQ firmware with - send email to <Martin.Bligh@us.ibm.com>. config X86_SUPPORTS_MEMORY_FAILURE - bool + def_bool y # MCE code calls memory_failure(): depends on X86_MCE # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: @@ -456,7 +463,6 @@ config X86_SUPPORTS_MEMORY_FAILURE # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: depends on X86_64 || !SPARSEMEM select ARCH_SUPPORTS_MEMORY_FAILURE - default y config X86_VISWS bool "SGI 320/540 (Visual Workstation)" @@ -571,7 +577,6 @@ config PARAVIRT_SPINLOCKS config PARAVIRT_CLOCK bool - default n endif @@ -750,7 +755,6 @@ config MAXSMP bool "Configure Maximum number of SMP Processors and NUMA Nodes" depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL select CPUMASK_OFFSTACK - default n ---help--- Configure maximum number of CPUS and NUMA Nodes for this architecture. If unsure, say N. @@ -830,7 +834,6 @@ config X86_VISWS_APIC config X86_REROUTE_FOR_BROKEN_BOOT_IRQS bool "Reroute for broken boot IRQs" - default n depends on X86_IO_APIC ---help--- This option enables a workaround that fixes a source of @@ -877,9 +880,8 @@ config X86_MCE_AMD the DRAM Error Threshold. config X86_ANCIENT_MCE - def_bool n + bool "Support for old Pentium 5 / WinChip machine checks" depends on X86_32 && X86_MCE - prompt "Support for old Pentium 5 / WinChip machine checks" ---help--- Include support for machine check handling on old Pentium 5 or WinChip systems. These typically need to be enabled explicitely on the command @@ -887,8 +889,7 @@ config X86_ANCIENT_MCE config X86_MCE_THRESHOLD depends on X86_MCE_AMD || X86_MCE_INTEL - bool - default y + def_bool y config X86_MCE_INJECT depends on X86_MCE @@ -1027,8 +1028,8 @@ config X86_CPUID choice prompt "High Memory Support" - default HIGHMEM4G if !X86_NUMAQ default HIGHMEM64G if X86_NUMAQ + default HIGHMEM4G depends on X86_32 config NOHIGHMEM @@ -1286,7 +1287,7 @@ source "mm/Kconfig" config HIGHPTE bool "Allocate 3rd-level pagetables from highmem" - depends on X86_32 && (HIGHMEM4G || HIGHMEM64G) + depends on HIGHMEM ---help--- The VM uses one page table entry for each page of physical memory. For systems with a lot of RAM, this can be wasteful of precious @@ -1370,8 +1371,7 @@ config MATH_EMULATION kernel, it won't hurt. config MTRR - bool - default y + def_bool y prompt "MTRR (Memory Type Range Register) support" if EMBEDDED ---help--- On Intel P6 family processors (Pentium Pro, Pentium II and later) @@ -1437,8 +1437,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT mtrr_spare_reg_nr=N on the kernel command line. config X86_PAT - bool - default y + def_bool y prompt "x86 PAT support" if EMBEDDED depends on MTRR ---help--- @@ -1606,8 +1605,7 @@ config X86_NEED_RELOCS depends on X86_32 && RELOCATABLE config PHYSICAL_ALIGN - hex - prompt "Alignment value to which kernel should be aligned" if X86_32 + hex "Alignment value to which kernel should be aligned" if X86_32 default "0x1000000" range 0x2000 0x1000000 ---help--- @@ -1654,7 +1652,6 @@ config COMPAT_VDSO config CMDLINE_BOOL bool "Built-in kernel command line" - default n ---help--- Allow for specifying boot arguments to the kernel at build time. On some systems (e.g. embedded ones), it is @@ -1688,7 +1685,6 @@ config CMDLINE config CMDLINE_OVERRIDE bool "Built-in command line overrides boot loader arguments" - default n depends on CMDLINE_BOOL ---help--- Set this option to 'Y' to have the kernel ignore the boot loader @@ -1711,6 +1707,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool X86_64 depends on NUMA +config USE_PERCPU_NUMA_NODE_ID + def_bool X86_64 + depends on NUMA + menu "Power management and ACPI options" config ARCH_HIBERNATION_HEADER @@ -1724,8 +1724,7 @@ source "drivers/acpi/Kconfig" source "drivers/sfi/Kconfig" config X86_APM_BOOT - bool - default y + def_bool y depends on APM || APM_MODULE menuconfig APM @@ -1932,6 +1931,14 @@ config PCI_MMCONFIG bool "Support mmconfig PCI config space access" depends on X86_64 && PCI && ACPI +config PCI_CNB20LE_QUIRK + bool "Read CNB20LE Host Bridge Windows" + depends on PCI + help + Read the PCI windows out of the CNB20LE host bridge. This allows + PCI hotplug to work on systems with the CNB20LE chipset which do + not have ACPI. + config DMAR bool "Support for DMA Remapping Devices (EXPERIMENTAL)" depends on PCI_MSI && ACPI && EXPERIMENTAL @@ -1954,8 +1961,7 @@ config DMAR_DEFAULT_ON experimental. config DMAR_BROKEN_GFX_WA - def_bool n - prompt "Workaround broken graphics drivers (going away soon)" + bool "Workaround broken graphics drivers (going away soon)" depends on DMAR && BROKEN ---help--- Current Graphics drivers tend to use physical address @@ -2053,7 +2059,6 @@ config SCx200HR_TIMER config OLPC bool "One Laptop Per Child support" select GPIOLIB - default n ---help--- Add support for detecting the unique features of the OLPC XO hardware. |