diff options
Diffstat (limited to 'arch/x86/boot/Makefile')
| -rw-r--r-- | arch/x86/boot/Makefile | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile new file mode 100644 index 00000000000..cb1035f2b7e --- /dev/null +++ b/arch/x86/boot/Makefile @@ -0,0 +1,171 @@ +# +# arch/x86/boot/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1994 by Linus Torvalds +# + +# ROOT_DEV specifies the default root-device when making the image. +# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case +# the default of FLOPPY is used by 'build'. + +ROOT_DEV := CURRENT + +# If you want to preset the SVGA mode, uncomment the next line and +# set SVGA_MODE to whatever number you want. +# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode. +# The number is the same as you would ordinarily press at bootup. + +SVGA_MODE := -DSVGA_MODE=NORMAL_VGA + +# If you want the RAM disk device, define this to be the size in blocks. + +#RAMDISK := -DRAMDISK=512 + +targets := vmlinux.bin setup.bin setup.elf zImage bzImage +subdir- := compressed + +setup-y += a20.o apm.o cmdline.o copy.o cpu.o cpucheck.o edd.o +setup-y += header.o main.o mca.o memory.o pm.o pmjump.o +setup-y += printf.o string.o tty.o video.o version.o voyager.o + +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +setup-y += video-vga.o +setup-y += video-vesa.o +setup-y += video-bios.o +targets += $(setup-y) +hostprogs-y := tools/build + +HOSTCFLAGS_build.o := $(LINUXINCLUDE) + +# --------------------------------------------------------------------------- + +# How to compile the 16-bit code. Note we always compile for -march=i386, +# that way we can complain to the user if the CPU is insufficient. +cflags-i386 := +cflags-x86_64 := -m32 +CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ + $(cflags-$(ARCH)) \ + -Wall -Wstrict-prototypes \ + -march=i386 -mregparm=3 \ + -include $(srctree)/$(src)/code16gcc.h \ + -fno-strict-aliasing -fomit-frame-pointer \ + $(call cc-option, -ffreestanding) \ + $(call cc-option, -fno-toplevel-reorder,\ + $(call cc-option, -fno-unit-at-a-time)) \ + $(call cc-option, -fno-stack-protector) \ + $(call cc-option, -mpreferred-stack-boundary=2) +AFLAGS := $(CFLAGS) -D__ASSEMBLY__ + +$(obj)/zImage: IMAGE_OFFSET := 0x1000 +$(obj)/zImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) +$(obj)/bzImage: IMAGE_OFFSET := 0x100000 +$(obj)/bzImage: EXTRA_CFLAGS := -D__BIG_KERNEL__ +$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__ +$(obj)/bzImage: BUILDFLAGS := -b + +quiet_cmd_image = BUILD $@ +cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \ + $(obj)/vmlinux.bin $(ROOT_DEV) > $@ + +$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \ + $(obj)/vmlinux.bin $(obj)/tools/build FORCE + $(call if_changed,image) + @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' + +$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE + $(call if_changed,objcopy) + +SETUP_OBJS = $(addprefix $(obj)/,$(setup-y)) + +LDFLAGS_setup.elf := -T +$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE + $(call if_changed,ld) + +OBJCOPYFLAGS_setup.bin := -O binary + +$(obj)/setup.bin: $(obj)/setup.elf FORCE + $(call if_changed,objcopy) + +$(obj)/compressed/vmlinux: FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@ + +# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel +FDARGS = +# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel +FDINITRD = + +image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,) + +$(obj)/mtools.conf: $(src)/mtools.conf.in + sed -e 's|@OBJ@|$(obj)|g' < $< > $@ + +# This requires write access to /dev/fd0 +zdisk: $(BOOTIMAGE) $(obj)/mtools.conf + MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync + syslinux /dev/fd0 ; sync + echo '$(image_cmdline)' | \ + MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \ + fi + MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync + +# These require being root or having syslinux 2.02 or higher installed +fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf + dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440 + MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync + syslinux $(obj)/fdimage ; sync + echo '$(image_cmdline)' | \ + MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \ + fi + MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync + +fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf + dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880 + MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync + syslinux $(obj)/fdimage ; sync + echo '$(image_cmdline)' | \ + MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \ + fi + MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync + +isoimage: $(BOOTIMAGE) + -rm -rf $(obj)/isoimage + mkdir $(obj)/isoimage + for i in lib lib64 share end ; do \ + if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \ + cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \ + break ; \ + fi ; \ + if [ $$i = end ] ; then exit 1 ; fi ; \ + done + cp $(BOOTIMAGE) $(obj)/isoimage/linux + echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg + if [ -f '$(FDINITRD)' ] ; then \ + cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \ + fi + mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \ + -no-emul-boot -boot-load-size 4 -boot-info-table \ + $(obj)/isoimage + rm -rf $(obj)/isoimage + +zlilo: $(BOOTIMAGE) + if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi + if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi + cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz + cp System.map $(INSTALL_PATH)/ + if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi + +install: + sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)" |