diff options
Diffstat (limited to 'arch/x86/boot/Makefile')
| -rw-r--r-- | arch/x86/boot/Makefile | 54 |
1 files changed, 25 insertions, 29 deletions
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index cd48c721001..fb737ce5888 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -6,33 +6,30 @@ # for more details. # # Copyright (C) 1994 by Linus Torvalds +# Changed by many, many contributors over the years. # # ROOT_DEV specifies the default root-device when making the image. # This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case # the default of FLOPPY is used by 'build'. -ROOT_DEV := CURRENT +ROOT_DEV := CURRENT # If you want to preset the SVGA mode, uncomment the next line and # set SVGA_MODE to whatever number you want. # Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode. # The number is the same as you would ordinarily press at bootup. -SVGA_MODE := -DSVGA_MODE=NORMAL_VGA +SVGA_MODE := -DSVGA_MODE=NORMAL_VGA -# If you want the RAM disk device, define this to be the size in blocks. - -#RAMDISK := -DRAMDISK=512 - -targets := vmlinux.bin setup.bin setup.elf zImage bzImage +targets := vmlinux.bin setup.bin setup.elf bzImage +targets += fdimage fdimage144 fdimage288 image.iso mtools.conf subdir- := compressed setup-y += a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o setup-y += header.o main.o mca.o memory.o pm.o pmjump.o setup-y += printf.o string.o tty.o video.o video-mode.o version.o setup-$(CONFIG_X86_APM_BOOT) += apm.o -setup-$(CONFIG_X86_VOYAGER) += voyager.o # The link order of the video-*.o modules can matter. In particular, # video-vga.o *must* be listed first, followed by video-vesa.o. @@ -72,17 +69,13 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \ KBUILD_CFLAGS += $(call cc-option,-m32) KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ -$(obj)/zImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -$(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__ -$(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__ -$(obj)/bzImage: BUILDFLAGS := -b +$(obj)/bzImage: asflags-y := $(SVGA_MODE) quiet_cmd_image = BUILD $@ -cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \ - $(obj)/vmlinux.bin $(ROOT_DEV) > $@ +cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \ + $(ROOT_DEV) > $@ -$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \ - $(obj)/vmlinux.bin $(obj)/tools/build FORCE +$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE $(call if_changed,image) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' @@ -117,9 +110,11 @@ $(obj)/setup.bin: $(obj)/setup.elf FORCE $(obj)/compressed/vmlinux: FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ -# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel +# Set this if you want to pass append arguments to the +# bzdisk/fdimage/isoimage kernel FDARGS = -# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel +# Set this if you want an initrd included with the +# bzdisk/fdimage/isoimage kernel FDINITRD = image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,) @@ -128,7 +123,7 @@ $(obj)/mtools.conf: $(src)/mtools.conf.in sed -e 's|@OBJ@|$(obj)|g' < $< > $@ # This requires write access to /dev/fd0 -zdisk: $(BOOTIMAGE) $(obj)/mtools.conf +bzdisk: $(obj)/bzImage $(obj)/mtools.conf MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync syslinux /dev/fd0 ; sync echo '$(image_cmdline)' | \ @@ -136,10 +131,10 @@ zdisk: $(BOOTIMAGE) $(obj)/mtools.conf if [ -f '$(FDINITRD)' ] ; then \ MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \ fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync + MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage a:linux ; sync # These require being root or having syslinux 2.02 or higher installed -fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf +fdimage fdimage144: $(obj)/bzImage $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440 MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync syslinux $(obj)/fdimage ; sync @@ -148,9 +143,9 @@ fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf if [ -f '$(FDINITRD)' ] ; then \ MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \ fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync + MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage v:linux ; sync -fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf +fdimage288: $(obj)/bzImage $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880 MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync syslinux $(obj)/fdimage ; sync @@ -159,9 +154,9 @@ fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf if [ -f '$(FDINITRD)' ] ; then \ MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \ fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync + MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage w:linux ; sync -isoimage: $(BOOTIMAGE) +isoimage: $(obj)/bzImage -rm -rf $(obj)/isoimage mkdir $(obj)/isoimage for i in lib lib64 share end ; do \ @@ -171,7 +166,7 @@ isoimage: $(BOOTIMAGE) fi ; \ if [ $$i = end ] ; then exit 1 ; fi ; \ done - cp $(BOOTIMAGE) $(obj)/isoimage/linux + cp $(obj)/bzImage $(obj)/isoimage/linux echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg if [ -f '$(FDINITRD)' ] ; then \ cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \ @@ -182,12 +177,13 @@ isoimage: $(BOOTIMAGE) isohybrid $(obj)/image.iso 2>/dev/null || true rm -rf $(obj)/isoimage -zlilo: $(BOOTIMAGE) +bzlilo: $(obj)/bzImage if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi - cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz + cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz cp System.map $(INSTALL_PATH)/ if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi install: - sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)" + sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(obj)/bzImage \ + System.map "$(INSTALL_PATH)" |