diff options
Diffstat (limited to 'arch/x86/boot')
-rw-r--r-- | arch/x86/boot/Makefile | 4 | ||||
-rw-r--r-- | arch/x86/boot/compressed/eboot.c | 10 | ||||
-rw-r--r-- | arch/x86/boot/compressed/head_32.S | 8 | ||||
-rw-r--r-- | arch/x86/boot/compressed/head_64.S | 8 | ||||
-rw-r--r-- | arch/x86/boot/header.S | 39 | ||||
-rw-r--r-- | arch/x86/boot/setup.ld | 2 | ||||
-rw-r--r-- | arch/x86/boot/tools/build.c | 81 |
7 files changed, 111 insertions, 41 deletions
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index ccce0ed67dd..379814bc41e 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -71,7 +71,7 @@ GCOV_PROFILE := n $(obj)/bzImage: asflags-y := $(SVGA_MODE) quiet_cmd_image = BUILD $@ -cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin > $@ +cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@ $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE $(call if_changed,image) @@ -92,7 +92,7 @@ targets += voffset.h $(obj)/voffset.h: vmlinux FORCE $(call if_changed,voffset) -sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p' +sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p' quiet_cmd_zoffset = ZOFFSET $@ cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@ diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index b0098ba4f23..f8fa41190c3 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -295,10 +295,15 @@ static efi_status_t setup_efi_pci(struct boot_params *params) if (!pci) continue; +#ifdef CONFIG_X86_64 status = efi_call_phys4(pci->attributes, pci, EfiPciIoAttributeOperationGet, 0, &attributes); - +#else + status = efi_call_phys5(pci->attributes, pci, + EfiPciIoAttributeOperationGet, 0, 0, + &attributes); +#endif if (status != EFI_SUCCESS) continue; @@ -429,10 +434,9 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto, * Once we've found a GOP supporting ConOut, * don't bother looking any further. */ + first_gop = gop; if (conout_found) break; - - first_gop = gop; } } diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index aa4aaf1b238..1e3184f6072 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -35,11 +35,11 @@ ENTRY(startup_32) #ifdef CONFIG_EFI_STUB jmp preferred_addr - .balign 0x10 /* * We don't need the return address, so set up the stack so - * efi_main() can find its arugments. + * efi_main() can find its arguments. */ +ENTRY(efi_pe_entry) add $0x4, %esp call make_boot_params @@ -50,8 +50,10 @@ ENTRY(startup_32) pushl %eax pushl %esi pushl %ecx + sub $0x4, %esp - .org 0x30,0x90 +ENTRY(efi_stub_entry) + add $0x4, %esp call efi_main cmpl $0, %eax movl %eax, %esi diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 2c4b171eec3..f5d1aaa0dec 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -201,12 +201,12 @@ ENTRY(startup_64) */ #ifdef CONFIG_EFI_STUB /* - * The entry point for the PE/COFF executable is 0x210, so only - * legacy boot loaders will execute this jmp. + * The entry point for the PE/COFF executable is efi_pe_entry, so + * only legacy boot loaders will execute this jmp. */ jmp preferred_addr - .org 0x210 +ENTRY(efi_pe_entry) mov %rcx, %rdi mov %rdx, %rsi pushq %rdi @@ -218,7 +218,7 @@ ENTRY(startup_64) popq %rsi popq %rdi - .org 0x230,0x90 +ENTRY(efi_stub_entry) call efi_main movq %rax,%rsi cmpq $0,%rax diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 8c132a625b9..944ce595f76 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -21,6 +21,7 @@ #include <asm/e820.h> #include <asm/page_types.h> #include <asm/setup.h> +#include <asm/bootparam.h> #include "boot.h" #include "voffset.h" #include "zoffset.h" @@ -255,6 +256,9 @@ section_table: # header, from the old boot sector. .section ".header", "a" + .globl sentinel +sentinel: .byte 0xff, 0xff /* Used to detect broken loaders */ + .globl hdr hdr: setup_sects: .byte 0 /* Filled in by build.c */ @@ -279,7 +283,7 @@ _start: # Part 2 of the header, from the old setup.S .ascii "HdrS" # header signature - .word 0x020b # header version number (>= 0x0105) + .word 0x020c # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) .globl realmode_swtch realmode_swtch: .word 0, 0 # default_switch, SETUPSEG @@ -297,13 +301,7 @@ type_of_loader: .byte 0 # 0 means ancient bootloader, newer # flags, unused bits must be zero (RFU) bit within loadflags loadflags: -LOADED_HIGH = 1 # If set, the kernel is loaded high -CAN_USE_HEAP = 0x80 # If set, the loader also has set - # heap_end_ptr to tell how much - # space behind setup.S can be used for - # heap purposes. - # Only the loader knows what is free - .byte LOADED_HIGH + .byte LOADED_HIGH # The kernel is to be loaded high setup_move_size: .word 0x8000 # size to move, when setup is not # loaded at 0x90000. We will move setup @@ -369,7 +367,23 @@ relocatable_kernel: .byte 1 relocatable_kernel: .byte 0 #endif min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment -pad3: .word 0 + +xloadflags: +#ifdef CONFIG_X86_64 +# define XLF0 XLF_KERNEL_64 /* 64-bit kernel */ +#else +# define XLF0 0 +#endif +#ifdef CONFIG_EFI_STUB +# ifdef CONFIG_X86_64 +# define XLF23 XLF_EFI_HANDOVER_64 /* 64-bit EFI handover ok */ +# else +# define XLF23 XLF_EFI_HANDOVER_32 /* 32-bit EFI handover ok */ +# endif +#else +# define XLF23 0 +#endif + .word XLF0 | XLF23 cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, #added with boot protocol @@ -397,8 +411,13 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr #define INIT_SIZE VO_INIT_SIZE #endif init_size: .long INIT_SIZE # kernel initialization size -handover_offset: .long 0x30 # offset to the handover +handover_offset: +#ifdef CONFIG_EFI_STUB + .long 0x30 # offset to the handover # protocol entry point +#else + .long 0 +#endif # End of setup header ##################################################### diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld index 03c0683636b..96a6c756353 100644 --- a/arch/x86/boot/setup.ld +++ b/arch/x86/boot/setup.ld @@ -13,7 +13,7 @@ SECTIONS .bstext : { *(.bstext) } .bsdata : { *(.bsdata) } - . = 497; + . = 495; .header : { *(.header) } .entrytext : { *(.entrytext) } .inittext : { *(.inittext) } diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c index 4b8e165ee57..94c54465002 100644 --- a/arch/x86/boot/tools/build.c +++ b/arch/x86/boot/tools/build.c @@ -52,6 +52,10 @@ int is_big_kernel; #define PECOFF_RELOC_RESERVE 0x20 +unsigned long efi_stub_entry; +unsigned long efi_pe_entry; +unsigned long startup_64; + /*----------------------------------------------------------------------*/ static const u32 crctab32[] = { @@ -132,7 +136,7 @@ static void die(const char * str, ...) static void usage(void) { - die("Usage: build setup system [> image]"); + die("Usage: build setup system [zoffset.h] [> image]"); } #ifdef CONFIG_EFI_STUB @@ -206,30 +210,54 @@ static void update_pecoff_text(unsigned int text_start, unsigned int file_sz) */ put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]); -#ifdef CONFIG_X86_32 /* - * Address of entry point. - * - * The EFI stub entry point is +16 bytes from the start of - * the .text section. + * Address of entry point for PE/COFF executable */ - put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]); -#else - /* - * Address of entry point. startup_32 is at the beginning and - * the 64-bit entry point (startup_64) is always 512 bytes - * after. The EFI stub entry point is 16 bytes after that, as - * the first instruction allows legacy loaders to jump over - * the EFI stub initialisation - */ - put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]); -#endif /* CONFIG_X86_32 */ + put_unaligned_le32(text_start + efi_pe_entry, &buf[pe_header + 0x28]); update_pecoff_section_header(".text", text_start, text_sz); } #endif /* CONFIG_EFI_STUB */ + +/* + * Parse zoffset.h and find the entry points. We could just #include zoffset.h + * but that would mean tools/build would have to be rebuilt every time. It's + * not as if parsing it is hard... + */ +#define PARSE_ZOFS(p, sym) do { \ + if (!strncmp(p, "#define ZO_" #sym " ", 11+sizeof(#sym))) \ + sym = strtoul(p + 11 + sizeof(#sym), NULL, 16); \ +} while (0) + +static void parse_zoffset(char *fname) +{ + FILE *file; + char *p; + int c; + + file = fopen(fname, "r"); + if (!file) + die("Unable to open `%s': %m", fname); + c = fread(buf, 1, sizeof(buf) - 1, file); + if (ferror(file)) + die("read-error on `zoffset.h'"); + buf[c] = 0; + + p = (char *)buf; + + while (p && *p) { + PARSE_ZOFS(p, efi_stub_entry); + PARSE_ZOFS(p, efi_pe_entry); + PARSE_ZOFS(p, startup_64); + + p = strchr(p, '\n'); + while (p && (*p == '\r' || *p == '\n')) + p++; + } +} + int main(int argc, char ** argv) { unsigned int i, sz, setup_sectors; @@ -241,7 +269,19 @@ int main(int argc, char ** argv) void *kernel; u32 crc = 0xffffffffUL; - if (argc != 3) + /* Defaults for old kernel */ +#ifdef CONFIG_X86_32 + efi_pe_entry = 0x10; + efi_stub_entry = 0x30; +#else + efi_pe_entry = 0x210; + efi_stub_entry = 0x230; + startup_64 = 0x200; +#endif + + if (argc == 4) + parse_zoffset(argv[3]); + else if (argc != 3) usage(); /* Copy the setup code */ @@ -299,6 +339,11 @@ int main(int argc, char ** argv) #ifdef CONFIG_EFI_STUB update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz)); + +#ifdef CONFIG_X86_64 /* Yes, this is really how we defined it :( */ + efi_stub_entry -= 0x200; +#endif + put_unaligned_le32(efi_stub_entry, &buf[0x264]); #endif crc = partial_crc32(buf, i, crc); |