diff options
Diffstat (limited to 'arch/x86/include/asm/io_32.h')
| -rw-r--r-- | arch/x86/include/asm/io_32.h | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h deleted file mode 100644 index a299900f592..00000000000 --- a/arch/x86/include/asm/io_32.h +++ /dev/null @@ -1,196 +0,0 @@ -#ifndef _ASM_X86_IO_32_H -#define _ASM_X86_IO_32_H - -#include <linux/string.h> -#include <linux/compiler.h> - -/* - * This file contains the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl and the "string versions" of the same - * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" - * versions of the single-IO instructions (inb_p/inw_p/..). - * - * This file is not meant to be obfuscating: it's just complicated - * to (a) handle it all in a way that makes gcc able to optimize it - * as well as possible and (b) trying to avoid writing the same thing - * over and over again with slight variations and possibly making a - * mistake somewhere. - */ - -/* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - */ - - /* - * Bit simplified and optimized by Jan Hubicka - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. - * - * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, - * isa_read[wl] and isa_write[wl] fixed - * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> - */ - -#define XQUAD_PORTIO_BASE 0xfe400000 -#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */ - -#ifdef __KERNEL__ - -#include <asm-generic/iomap.h> - -#include <linux/vmalloc.h> - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -static inline void -memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - memset((void __force *)addr, val, count); -} - -static inline void -memcpy_fromio(void *dst, const volatile void __iomem *src, int count) -{ - __memcpy(dst, (const void __force *)src, count); -} - -static inline void -memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - __memcpy((void __force *)dst, src, count); -} - -/* - * ISA space is 'always mapped' on a typical x86 system, no need to - * explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) - -/* - * Cache management - * - * This needed for two cases - * 1. Out of order aware processors - * 2. Accidentally out of order processors (PPro errata #51) - */ - -#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE) - -static inline void flush_write_buffers(void) -{ - asm volatile("lock; addl $0,0(%%esp)": : :"memory"); -} - -#else - -#define flush_write_buffers() do { } while (0) - -#endif - -#endif /* __KERNEL__ */ - -extern void native_io_delay(void); - -extern int io_delay_type; -extern void io_delay_init(void); - -#if defined(CONFIG_PARAVIRT) -#include <asm/paravirt.h> -#else - -static inline void slow_down_io(void) -{ - native_io_delay(); -#ifdef REALLY_SLOW_IO - native_io_delay(); - native_io_delay(); - native_io_delay(); -#endif -} - -#endif - -#define __BUILDIO(bwl, bw, type) \ -static inline void out##bwl(unsigned type value, int port) \ -{ \ - out##bwl##_local(value, port); \ -} \ - \ -static inline unsigned type in##bwl(int port) \ -{ \ - return in##bwl##_local(port); \ -} - -#define BUILDIO(bwl, bw, type) \ -static inline void out##bwl##_local(unsigned type value, int port) \ -{ \ - asm volatile("out" #bwl " %" #bw "0, %w1" \ - : : "a"(value), "Nd"(port)); \ -} \ - \ -static inline unsigned type in##bwl##_local(int port) \ -{ \ - unsigned type value; \ - asm volatile("in" #bwl " %w1, %" #bw "0" \ - : "=a"(value) : "Nd"(port)); \ - return value; \ -} \ - \ -static inline void out##bwl##_local_p(unsigned type value, int port) \ -{ \ - out##bwl##_local(value, port); \ - slow_down_io(); \ -} \ - \ -static inline unsigned type in##bwl##_local_p(int port) \ -{ \ - unsigned type value = in##bwl##_local(port); \ - slow_down_io(); \ - return value; \ -} \ - \ -__BUILDIO(bwl, bw, type) \ - \ -static inline void out##bwl##_p(unsigned type value, int port) \ -{ \ - out##bwl(value, port); \ - slow_down_io(); \ -} \ - \ -static inline unsigned type in##bwl##_p(int port) \ -{ \ - unsigned type value = in##bwl(port); \ - slow_down_io(); \ - return value; \ -} \ - \ -static inline void outs##bwl(int port, const void *addr, unsigned long count) \ -{ \ - asm volatile("rep; outs" #bwl \ - : "+S"(addr), "+c"(count) : "d"(port)); \ -} \ - \ -static inline void ins##bwl(int port, void *addr, unsigned long count) \ -{ \ - asm volatile("rep; ins" #bwl \ - : "+D"(addr), "+c"(count) : "d"(port)); \ -} - -BUILDIO(b, b, char) -BUILDIO(w, w, short) -BUILDIO(l, , int) - -#endif /* _ASM_X86_IO_32_H */ |