diff options
Diffstat (limited to 'arch/x86/include/asm/irq_vectors.h')
| -rw-r--r-- | arch/x86/include/asm/irq_vectors.h | 209 |
1 files changed, 105 insertions, 104 deletions
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index f7ff65032b9..b07278c55e9 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -1,47 +1,69 @@ #ifndef _ASM_X86_IRQ_VECTORS_H #define _ASM_X86_IRQ_VECTORS_H -#include <linux/threads.h> +/* + * Linux IRQ vector layout. + * + * There are 256 IDT entries (per CPU - each entry is 8 bytes) which can + * be defined by Linux. They are used as a jump table by the CPU when a + * given vector is triggered - by a CPU-external, CPU-internal or + * software-triggered event. + * + * Linux sets the kernel code address each entry jumps to early during + * bootup, and never changes them. This is the general layout of the + * IDT entries: + * + * Vectors 0 ... 31 : system traps and exceptions - hardcoded events + * Vectors 32 ... 127 : device interrupts + * Vector 128 : legacy int80 syscall interface + * Vectors 129 ... 237 : device interrupts + * Vectors 238 ... 255 : special interrupts + * + * 64-bit x86 has per CPU IDT tables, 32-bit has one shared IDT table. + * + * This file enumerates the exact layout of them: + */ -#define NMI_VECTOR 0x02 +#define NMI_VECTOR 0x02 /* * IDT vectors usable for external interrupt sources start * at 0x20: */ -#define FIRST_EXTERNAL_VECTOR 0x20 +#define FIRST_EXTERNAL_VECTOR 0x20 #ifdef CONFIG_X86_32 -# define SYSCALL_VECTOR 0x80 +# define SYSCALL_VECTOR 0x80 #else -# define IA32_SYSCALL_VECTOR 0x80 +# define IA32_SYSCALL_VECTOR 0x80 #endif /* * Reserve the lowest usable priority level 0x20 - 0x2f for triggering * cleanup after irq migration. */ -#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR +#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR /* * Vectors 0x30-0x3f are used for ISA interrupts. */ -#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10) -#define IRQ1_VECTOR (IRQ0_VECTOR + 1) -#define IRQ2_VECTOR (IRQ0_VECTOR + 2) -#define IRQ3_VECTOR (IRQ0_VECTOR + 3) -#define IRQ4_VECTOR (IRQ0_VECTOR + 4) -#define IRQ5_VECTOR (IRQ0_VECTOR + 5) -#define IRQ6_VECTOR (IRQ0_VECTOR + 6) -#define IRQ7_VECTOR (IRQ0_VECTOR + 7) -#define IRQ8_VECTOR (IRQ0_VECTOR + 8) -#define IRQ9_VECTOR (IRQ0_VECTOR + 9) -#define IRQ10_VECTOR (IRQ0_VECTOR + 10) -#define IRQ11_VECTOR (IRQ0_VECTOR + 11) -#define IRQ12_VECTOR (IRQ0_VECTOR + 12) -#define IRQ13_VECTOR (IRQ0_VECTOR + 13) -#define IRQ14_VECTOR (IRQ0_VECTOR + 14) -#define IRQ15_VECTOR (IRQ0_VECTOR + 15) +#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10) + +#define IRQ1_VECTOR (IRQ0_VECTOR + 1) +#define IRQ2_VECTOR (IRQ0_VECTOR + 2) +#define IRQ3_VECTOR (IRQ0_VECTOR + 3) +#define IRQ4_VECTOR (IRQ0_VECTOR + 4) +#define IRQ5_VECTOR (IRQ0_VECTOR + 5) +#define IRQ6_VECTOR (IRQ0_VECTOR + 6) +#define IRQ7_VECTOR (IRQ0_VECTOR + 7) +#define IRQ8_VECTOR (IRQ0_VECTOR + 8) +#define IRQ9_VECTOR (IRQ0_VECTOR + 9) +#define IRQ10_VECTOR (IRQ0_VECTOR + 10) +#define IRQ11_VECTOR (IRQ0_VECTOR + 11) +#define IRQ12_VECTOR (IRQ0_VECTOR + 12) +#define IRQ13_VECTOR (IRQ0_VECTOR + 13) +#define IRQ14_VECTOR (IRQ0_VECTOR + 14) +#define IRQ15_VECTOR (IRQ0_VECTOR + 15) /* * Special IRQ vectors used by the SMP architecture, 0xf0-0xff @@ -49,119 +71,98 @@ * some of the following vectors are 'rare', they are merged * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. * TLB, reschedule and local APIC vectors are performance-critical. - * - * Vectors 0xf0-0xfa are free (reserved for future Linux use). */ -#ifdef CONFIG_X86_32 - -# define SPURIOUS_APIC_VECTOR 0xff -# define ERROR_APIC_VECTOR 0xfe -# define INVALIDATE_TLB_VECTOR 0xfd -# define RESCHEDULE_VECTOR 0xfc -# define CALL_FUNCTION_VECTOR 0xfb -# define CALL_FUNCTION_SINGLE_VECTOR 0xfa -# define THERMAL_APIC_VECTOR 0xf0 - -#else #define SPURIOUS_APIC_VECTOR 0xff +/* + * Sanity check + */ +#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F) +# error SPURIOUS_APIC_VECTOR definition error +#endif + #define ERROR_APIC_VECTOR 0xfe #define RESCHEDULE_VECTOR 0xfd #define CALL_FUNCTION_VECTOR 0xfc #define CALL_FUNCTION_SINGLE_VECTOR 0xfb #define THERMAL_APIC_VECTOR 0xfa -#define THRESHOLD_APIC_VECTOR 0xf9 -#define UV_BAU_MESSAGE 0xf8 -#define INVALIDATE_TLB_VECTOR_END 0xf7 -#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */ - -#define NUM_INVALIDATE_TLB_VECTORS 8 +#ifdef CONFIG_X86_32 +/* 0xf8 - 0xf9 : free */ +#else +# define THRESHOLD_APIC_VECTOR 0xf9 +# define UV_BAU_MESSAGE 0xf8 #endif +/* f0-f7 used for spreading out TLB flushes: */ +#define INVALIDATE_TLB_VECTOR_END 0xf7 +#define INVALIDATE_TLB_VECTOR_START 0xf0 +#define NUM_INVALIDATE_TLB_VECTORS 8 + /* * Local APIC timer IRQ vector is on a different priority level, * to work around the 'lost local interrupt if more than 2 IRQ * sources per level' errata. */ -#define LOCAL_TIMER_VECTOR 0xef +#define LOCAL_TIMER_VECTOR 0xef + +/* + * Performance monitoring interrupt vector: + */ +#define LOCAL_PERF_VECTOR 0xee /* * First APIC vector available to drivers: (vectors 0x30-0xee) we * start at 0x31(0x41) to spread out vectors evenly between priority * levels. (0x80 is the syscall vector) */ -#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) - -#define NR_VECTORS 256 +#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) -#define FPU_IRQ 13 +#define NR_VECTORS 256 -#define FIRST_VM86_IRQ 3 -#define LAST_VM86_IRQ 15 -#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) +#define FPU_IRQ 13 -#define NR_IRQS_LEGACY 16 +#define FIRST_VM86_IRQ 3 +#define LAST_VM86_IRQ 15 -#if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_VOYAGER) - -#ifndef CONFIG_SPARSE_IRQ -# if NR_CPUS < MAX_IO_APICS -# define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) -# else -# define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) -# endif -#else -# if (8 * NR_CPUS) > (32 * MAX_IO_APICS) -# define NR_IRQS (NR_VECTORS + (8 * NR_CPUS)) -# else -# define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) -# endif +#ifndef __ASSEMBLY__ +static inline int invalid_vm86_irq(int irq) +{ + return irq < 3 || irq > 15; +} #endif -#elif defined(CONFIG_X86_VOYAGER) - -# define NR_IRQS 224 +/* + * Size the maximum number of interrupts. + * + * If the irq_desc[] array has a sparse layout, we can size things + * generously - it scales up linearly with the maximum number of CPUs, + * and the maximum number of IO-APICs, whichever is higher. + * + * In other cases we size more conservatively, to not create too large + * static arrays. + */ -#else /* IO_APIC || VOYAGER */ +#define NR_IRQS_LEGACY 16 -# define NR_IRQS 16 +#define CPU_VECTOR_LIMIT ( 8 * NR_CPUS ) +#define IO_APIC_VECTOR_LIMIT ( 32 * MAX_IO_APICS ) +#ifdef CONFIG_X86_IO_APIC +# ifdef CONFIG_SPARSE_IRQ +# define NR_IRQS \ + (CPU_VECTOR_LIMIT > IO_APIC_VECTOR_LIMIT ? \ + (NR_VECTORS + CPU_VECTOR_LIMIT) : \ + (NR_VECTORS + IO_APIC_VECTOR_LIMIT)) +# else +# if NR_CPUS < MAX_IO_APICS +# define NR_IRQS (NR_VECTORS + 4*CPU_VECTOR_LIMIT) +# else +# define NR_IRQS (NR_VECTORS + IO_APIC_VECTOR_LIMIT) +# endif +# endif +#else /* !CONFIG_X86_IO_APIC: */ +# define NR_IRQS NR_IRQS_LEGACY #endif -/* Voyager specific defines */ -/* These define the CPIs we use in linux */ -#define VIC_CPI_LEVEL0 0 -#define VIC_CPI_LEVEL1 1 -/* now the fake CPIs */ -#define VIC_TIMER_CPI 2 -#define VIC_INVALIDATE_CPI 3 -#define VIC_RESCHEDULE_CPI 4 -#define VIC_ENABLE_IRQ_CPI 5 -#define VIC_CALL_FUNCTION_CPI 6 -#define VIC_CALL_FUNCTION_SINGLE_CPI 7 - -/* Now the QIC CPIs: Since we don't need the two initial levels, - * these are 2 less than the VIC CPIs */ -#define QIC_CPI_OFFSET 1 -#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET) -#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET) -#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET) -#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET) -#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET) -#define QIC_CALL_FUNCTION_SINGLE_CPI (VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET) - -#define VIC_START_FAKE_CPI VIC_TIMER_CPI -#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_SINGLE_CPI - -/* this is the SYS_INT CPI. */ -#define VIC_SYS_INT 8 -#define VIC_CMN_INT 15 - -/* This is the boot CPI for alternate processors. It gets overwritten - * by the above once the system has activated all available processors */ -#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0 -#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8) - - #endif /* _ASM_X86_IRQ_VECTORS_H */ |