1 files changed, 0 insertions, 202 deletions
diff --git a/arch/x86/include/asm/summit/apic.h b/arch/x86/include/asm/summit/apic.h
deleted file mode 100644
index 93d2c8667cf..00000000000
--- a/arch/x86/include/asm/summit/apic.h
+++ /dev/null
@@ -1,202 +0,0 @@
-#ifndef __ASM_SUMMIT_APIC_H
-#define __ASM_SUMMIT_APIC_H
-
-#include <asm/smp.h>
-#include <linux/gfp.h>
-
-#define esr_disable (1)
-#define NO_BALANCE_IRQ (0)
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT	4
-#define XAPIC_DEST_CPUS_MASK	((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK	(XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
-#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
-
-static inline const cpumask_t *target_cpus(void)
-{
-	/* CPU_MASK_ALL (0xff) has undefined behaviour with
-	 * dest_LowestPrio mode logical clustered apic interrupt routing
-	 * Just start on cpu 0.  IRQ balancing will spread load
-	 */
-	return &cpumask_of_cpu(0);
-}
-
-#define INT_DELIVERY_MODE (dest_LowestPrio)
-#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-
-/* we don't use the phys_cpu_present_map to indicate apicid presence */
-static inline unsigned long check_apicid_present(int bit)
-{
-	return 1;
-}
-
-#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
-
-extern u8 cpu_2_logical_apicid[];
-
-static inline void init_apic_ldr(void)
-{
-	unsigned long val, id;
-	int count = 0;
-	u8 my_id = (u8)hard_smp_processor_id();
-	u8 my_cluster = (u8)apicid_cluster(my_id);
-#ifdef CONFIG_SMP
-	u8 lid;
-	int i;
-
-	/* Create logical APIC IDs by counting CPUs already in cluster. */
-	for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
-		lid = cpu_2_logical_apicid[i];
-		if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
-			++count;
-	}
-#endif
-	/* We only have a 4 wide bitmap in cluster mode.  If a deranged
-	 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
-	BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
-	id = my_cluster | (1UL << count);
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	val |= SET_APIC_LOGICAL_ID(id);
-	apic_write(APIC_LDR, val);
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
-	return 0;
-}
-
-static inline int apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline void setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
-						nr_ioapics);
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
-	return apicid_2_node[hard_smp_processor_id()];
-#else
-	return 0;
-#endif
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-#ifdef CONFIG_SMP
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return (int)cpu_2_logical_apicid[cpu];
-#else
-	return logical_smp_processor_id();
-#endif
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids)
-		return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0x0F);
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int apicid)
-{
-	return physid_mask_of_physid(0);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-static inline unsigned int cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	int num_bits_set;
-	int cpus_found = 0;
-	int cpu;
-	int apicid;
-
-	num_bits_set = cpus_weight(*cpumask);
-	/* Return id to all */
-	if (num_bits_set >= nr_cpu_ids)
-		return (int) 0xFF;
-	/*
-	 * The cpus in the mask must all be on the apic cluster.  If are not
-	 * on the same apicid cluster return default value of TARGET_CPUS.
-	 */
-	cpu = first_cpu(*cpumask);
-	apicid = cpu_to_logical_apicid(cpu);
-	while (cpus_found < num_bits_set) {
-		if (cpu_isset(cpu, *cpumask)) {
-			int new_apicid = cpu_to_logical_apicid(cpu);
-			if (apicid_cluster(apicid) !=
-					apicid_cluster(new_apicid)){
-				printk ("%s: Not a valid mask!\n", __func__);
-				return 0xFF;
-			}
-			apicid = apicid | new_apicid;
-			cpus_found++;
-		}
-		cpu++;
-	}
-	return apicid;
-}
-
-static inline unsigned int cpu_mask_to_apicid_and(const struct cpumask *inmask,
-						  const struct cpumask *andmask)
-{
-	int apicid = cpu_to_logical_apicid(0);
-	cpumask_var_t cpumask;
-
-	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
-		return apicid;
-
-	cpumask_and(cpumask, inmask, andmask);
-	cpumask_and(cpumask, cpumask, cpu_online_mask);
-	apicid = cpu_mask_to_apicid(cpumask);
-
-	free_cpumask_var(cpumask);
-	return apicid;
-}
-
-/* cpuid returns the value latched in the HW at reset, not the APIC ID
- * register's value.  For any box whose BIOS changes APIC IDs, like
- * clustered APIC systems, we must use hard_smp_processor_id.
- *
- * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
- */
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-	return hard_smp_processor_id() >> index_msb;
-}
-
-#endif /* __ASM_SUMMIT_APIC_H */