summaryrefslogtreecommitdiffstats
path: root/arch/x86/include/asm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/include/asm')
-rw-r--r--arch/x86/include/asm/cmpxchg.h6
-rw-r--r--arch/x86/include/asm/cpufeature.h1
-rw-r--r--arch/x86/include/asm/i387.h307
-rw-r--r--arch/x86/include/asm/kvm_emulate.h16
-rw-r--r--arch/x86/include/asm/processor.h2
-rw-r--r--arch/x86/include/asm/thread_info.h2
-rw-r--r--arch/x86/include/asm/unistd.h1
-rw-r--r--arch/x86/include/asm/uv/uv_bau.h107
-rw-r--r--arch/x86/include/asm/uv/uv_hub.h4
9 files changed, 376 insertions, 70 deletions
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index 0c9fa2745f1..b3b73326290 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -145,13 +145,13 @@ extern void __add_wrong_size(void)
#ifdef __HAVE_ARCH_CMPXCHG
#define cmpxchg(ptr, old, new) \
- __cmpxchg((ptr), (old), (new), sizeof(*ptr))
+ __cmpxchg(ptr, old, new, sizeof(*(ptr)))
#define sync_cmpxchg(ptr, old, new) \
- __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
+ __sync_cmpxchg(ptr, old, new, sizeof(*(ptr)))
#define cmpxchg_local(ptr, old, new) \
- __cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
+ __cmpxchg_local(ptr, old, new, sizeof(*(ptr)))
#endif
/*
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 17c5d4bdee5..8d67d428b0f 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -159,6 +159,7 @@
#define X86_FEATURE_WDT (6*32+13) /* Watchdog timer */
#define X86_FEATURE_LWP (6*32+15) /* Light Weight Profiling */
#define X86_FEATURE_FMA4 (6*32+16) /* 4 operands MAC instructions */
+#define X86_FEATURE_TCE (6*32+17) /* translation cache extension */
#define X86_FEATURE_NODEID_MSR (6*32+19) /* NodeId MSR */
#define X86_FEATURE_TBM (6*32+21) /* trailing bit manipulations */
#define X86_FEATURE_TOPOEXT (6*32+22) /* topology extensions CPUID leafs */
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 6919e936345..247904945d3 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -29,10 +29,11 @@ extern unsigned int sig_xstate_size;
extern void fpu_init(void);
extern void mxcsr_feature_mask_init(void);
extern int init_fpu(struct task_struct *child);
-extern asmlinkage void math_state_restore(void);
-extern void __math_state_restore(void);
+extern void math_state_restore(void);
extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
+DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
+
extern user_regset_active_fn fpregs_active, xfpregs_active;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
xstateregs_get;
@@ -212,19 +213,11 @@ static inline void fpu_fxsave(struct fpu *fpu)
#endif /* CONFIG_X86_64 */
-/* We need a safe address that is cheap to find and that is already
- in L1 during context switch. The best choices are unfortunately
- different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER])
-#endif
-
/*
- * These must be called with preempt disabled
+ * These must be called with preempt disabled. Returns
+ * 'true' if the FPU state is still intact.
*/
-static inline void fpu_save_init(struct fpu *fpu)
+static inline int fpu_save_init(struct fpu *fpu)
{
if (use_xsave()) {
fpu_xsave(fpu);
@@ -233,33 +226,33 @@ static inline void fpu_save_init(struct fpu *fpu)
* xsave header may indicate the init state of the FP.
*/
if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
- return;
+ return 1;
} else if (use_fxsr()) {
fpu_fxsave(fpu);
} else {
asm volatile("fnsave %[fx]; fwait"
: [fx] "=m" (fpu->state->fsave));
- return;
+ return 0;
}
- if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES))
+ /*
+ * If exceptions are pending, we need to clear them so
+ * that we don't randomly get exceptions later.
+ *
+ * FIXME! Is this perhaps only true for the old-style
+ * irq13 case? Maybe we could leave the x87 state
+ * intact otherwise?
+ */
+ if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) {
asm volatile("fnclex");
-
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- ASM_NOP8 ASM_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %P[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
+ return 0;
+ }
+ return 1;
}
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline int __save_init_fpu(struct task_struct *tsk)
{
- fpu_save_init(&tsk->thread.fpu);
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ return fpu_save_init(&tsk->thread.fpu);
}
static inline int fpu_fxrstor_checking(struct fpu *fpu)
@@ -277,44 +270,212 @@ static inline int fpu_restore_checking(struct fpu *fpu)
static inline int restore_fpu_checking(struct task_struct *tsk)
{
+ /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+ is pending. Clear the x87 state here by setting it to fixed
+ values. "m" is a random variable that should be in L1 */
+ alternative_input(
+ ASM_NOP8 ASM_NOP2,
+ "emms\n\t" /* clear stack tags */
+ "fildl %P[addr]", /* set F?P to defined value */
+ X86_FEATURE_FXSAVE_LEAK,
+ [addr] "m" (tsk->thread.fpu.has_fpu));
+
return fpu_restore_checking(&tsk->thread.fpu);
}
/*
- * Signal frame handlers...
+ * Software FPU state helpers. Careful: these need to
+ * be preemption protection *and* they need to be
+ * properly paired with the CR0.TS changes!
*/
-extern int save_i387_xstate(void __user *buf);
-extern int restore_i387_xstate(void __user *buf);
+static inline int __thread_has_fpu(struct task_struct *tsk)
+{
+ return tsk->thread.fpu.has_fpu;
+}
-static inline void __unlazy_fpu(struct task_struct *tsk)
+/* Must be paired with an 'stts' after! */
+static inline void __thread_clear_has_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- __save_init_fpu(tsk);
- stts();
- } else
- tsk->fpu_counter = 0;
+ tsk->thread.fpu.has_fpu = 0;
+ percpu_write(fpu_owner_task, NULL);
+}
+
+/* Must be paired with a 'clts' before! */
+static inline void __thread_set_has_fpu(struct task_struct *tsk)
+{
+ tsk->thread.fpu.has_fpu = 1;
+ percpu_write(fpu_owner_task, tsk);
+}
+
+/*
+ * Encapsulate the CR0.TS handling together with the
+ * software flag.
+ *
+ * These generally need preemption protection to work,
+ * do try to avoid using these on their own.
+ */
+static inline void __thread_fpu_end(struct task_struct *tsk)
+{
+ __thread_clear_has_fpu(tsk);
+ stts();
+}
+
+static inline void __thread_fpu_begin(struct task_struct *tsk)
+{
+ clts();
+ __thread_set_has_fpu(tsk);
+}
+
+/*
+ * FPU state switching for scheduling.
+ *
+ * This is a two-stage process:
+ *
+ * - switch_fpu_prepare() saves the old state and
+ * sets the new state of the CR0.TS bit. This is
+ * done within the context of the old process.
+ *
+ * - switch_fpu_finish() restores the new state as
+ * necessary.
+ */
+typedef struct { int preload; } fpu_switch_t;
+
+/*
+ * FIXME! We could do a totally lazy restore, but we need to
+ * add a per-cpu "this was the task that last touched the FPU
+ * on this CPU" variable, and the task needs to have a "I last
+ * touched the FPU on this CPU" and check them.
+ *
+ * We don't do that yet, so "fpu_lazy_restore()" always returns
+ * false, but some day..
+ */
+static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
+{
+ return new == percpu_read_stable(fpu_owner_task) &&
+ cpu == new->thread.fpu.last_cpu;
+}
+
+static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
+{
+ fpu_switch_t fpu;
+
+ fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
+ if (__thread_has_fpu(old)) {
+ if (!__save_init_fpu(old))
+ cpu = ~0;
+ old->thread.fpu.last_cpu = cpu;
+ old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */
+
+ /* Don't change CR0.TS if we just switch! */
+ if (fpu.preload) {
+ new->fpu_counter++;
+ __thread_set_has_fpu(new);
+ prefetch(new->thread.fpu.state);
+ } else
+ stts();
+ } else {
+ old->fpu_counter = 0;
+ old->thread.fpu.last_cpu = ~0;
+ if (fpu.preload) {
+ new->fpu_counter++;
+ if (fpu_lazy_restore(new, cpu))
+ fpu.preload = 0;
+ else
+ prefetch(new->thread.fpu.state);
+ __thread_fpu_begin(new);
+ }
+ }
+ return fpu;
+}
+
+/*
+ * By the time this gets called, we've already cleared CR0.TS and
+ * given the process the FPU if we are going to preload the FPU
+ * state - all we need to do is to conditionally restore the register
+ * state itself.
+ */
+static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
+{
+ if (fpu.preload) {
+ if (unlikely(restore_fpu_checking(new)))
+ __thread_fpu_end(new);
+ }
}
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387_xstate(void __user *buf);
+extern int restore_i387_xstate(void __user *buf);
+
static inline void __clear_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ if (__thread_has_fpu(tsk)) {
/* Ignore delayed exceptions from user space */
asm volatile("1: fwait\n"
"2:\n"
_ASM_EXTABLE(1b, 2b));
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
+ __thread_fpu_end(tsk);
}
}
+/*
+ * Were we in an interrupt that interrupted kernel mode?
+ *
+ * We can do a kernel_fpu_begin/end() pair *ONLY* if that
+ * pair does nothing at all: the thread must not have fpu (so
+ * that we don't try to save the FPU state), and TS must
+ * be set (so that the clts/stts pair does nothing that is
+ * visible in the interrupted kernel thread).
+ */
+static inline bool interrupted_kernel_fpu_idle(void)
+{
+ return !__thread_has_fpu(current) &&
+ (read_cr0() & X86_CR0_TS);
+}
+
+/*
+ * Were we in user mode (or vm86 mode) when we were
+ * interrupted?
+ *
+ * Doing kernel_fpu_begin/end() is ok if we are running
+ * in an interrupt context from user mode - we'll just
+ * save the FPU state as required.
+ */
+static inline bool interrupted_user_mode(void)
+{
+ struct pt_regs *regs = get_irq_regs();
+ return regs && user_mode_vm(regs);
+}
+
+/*
+ * Can we use the FPU in kernel mode with the
+ * whole "kernel_fpu_begin/end()" sequence?
+ *
+ * It's always ok in process context (ie "not interrupt")
+ * but it is sometimes ok even from an irq.
+ */
+static inline bool irq_fpu_usable(void)
+{
+ return !in_interrupt() ||
+ interrupted_user_mode() ||
+ interrupted_kernel_fpu_idle();
+}
+
static inline void kernel_fpu_begin(void)
{
- struct thread_info *me = current_thread_info();
+ struct task_struct *me = current;
+
+ WARN_ON_ONCE(!irq_fpu_usable());
preempt_disable();
- if (me->status & TS_USEDFPU)
- __save_init_fpu(me->task);
- else
+ if (__thread_has_fpu(me)) {
+ __save_init_fpu(me);
+ __thread_clear_has_fpu(me);
+ /* We do 'stts()' in kernel_fpu_end() */
+ } else {
+ percpu_write(fpu_owner_task, NULL);
clts();
+ }
}
static inline void kernel_fpu_end(void)
@@ -323,14 +484,6 @@ static inline void kernel_fpu_end(void)
preempt_enable();
}
-static inline bool irq_fpu_usable(void)
-{
- struct pt_regs *regs;
-
- return !in_interrupt() || !(regs = get_irq_regs()) || \
- user_mode(regs) || (read_cr0() & X86_CR0_TS);
-}
-
/*
* Some instructions like VIA's padlock instructions generate a spurious
* DNA fault but don't modify SSE registers. And these instructions
@@ -363,20 +516,64 @@ static inline void irq_ts_restore(int TS_state)
}
/*
+ * The question "does this thread have fpu access?"
+ * is slightly racy, since preemption could come in
+ * and revoke it immediately after the test.
+ *
+ * However, even in that very unlikely scenario,
+ * we can just assume we have FPU access - typically
+ * to save the FP state - we'll just take a #NM
+ * fault and get the FPU access back.
+ *
+ * The actual user_fpu_begin/end() functions
+ * need to be preemption-safe, though.
+ *
+ * NOTE! user_fpu_end() must be used only after you
+ * have saved the FP state, and user_fpu_begin() must
+ * be used only immediately before restoring it.
+ * These functions do not do any save/restore on
+ * their own.
+ */
+static inline int user_has_fpu(void)
+{
+ return __thread_has_fpu(current);
+}
+
+static inline void user_fpu_end(void)
+{
+ preempt_disable();
+ __thread_fpu_end(current);
+ preempt_enable();
+}
+
+static inline void user_fpu_begin(void)
+{
+ preempt_disable();
+ if (!user_has_fpu())
+ __thread_fpu_begin(current);
+ preempt_enable();
+}
+
+/*
* These disable preemption on their own and are safe
*/
static inline void save_init_fpu(struct task_struct *tsk)
{
+ WARN_ON_ONCE(!__thread_has_fpu(tsk));
preempt_disable();
__save_init_fpu(tsk);
- stts();
+ __thread_fpu_end(tsk);
preempt_enable();
}
static inline void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
- __unlazy_fpu(tsk);
+ if (__thread_has_fpu(tsk)) {
+ __save_init_fpu(tsk);
+ __thread_fpu_end(tsk);
+ } else
+ tsk->fpu_counter = 0;
preempt_enable();
}
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index ab4092e3214..7b9cfc4878a 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -190,6 +190,9 @@ struct x86_emulate_ops {
int (*intercept)(struct x86_emulate_ctxt *ctxt,
struct x86_instruction_info *info,
enum x86_intercept_stage stage);
+
+ bool (*get_cpuid)(struct x86_emulate_ctxt *ctxt,
+ u32 *eax, u32 *ebx, u32 *ecx, u32 *edx);
};
typedef u32 __attribute__((vector_size(16))) sse128_t;
@@ -298,6 +301,19 @@ struct x86_emulate_ctxt {
#define X86EMUL_MODE_PROT (X86EMUL_MODE_PROT16|X86EMUL_MODE_PROT32| \
X86EMUL_MODE_PROT64)
+/* CPUID vendors */
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx 0x68747541
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx 0x444d4163
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_edx 0x69746e65
+
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx 0x69444d41
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx 0x21726574
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_edx 0x74656273
+
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ebx 0x756e6547
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ecx 0x6c65746e
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_edx 0x49656e69
+
enum x86_intercept_stage {
X86_ICTP_NONE = 0, /* Allow zero-init to not match anything */
X86_ICPT_PRE_EXCEPT,
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index aa9088c2693..58545c97d07 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -374,6 +374,8 @@ union thread_xstate {
};
struct fpu {
+ unsigned int last_cpu;
+ unsigned int has_fpu;
union thread_xstate *state;
};
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index bc817cd8b44..cfd8144d552 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -247,8 +247,6 @@ static inline struct thread_info *current_thread_info(void)
* ever touches our thread-synchronous status, so we don't
* have to worry about atomic accesses.
*/
-#define TS_USEDFPU 0x0001 /* FPU was used by this task
- this quantum (SMP) */
#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/
#define TS_POLLING 0x0004 /* idle task polling need_resched,
skip sending interrupt */
diff --git a/arch/x86/include/asm/unistd.h b/arch/x86/include/asm/unistd.h
index b4a3db7ce14..21f77b89e47 100644
--- a/arch/x86/include/asm/unistd.h
+++ b/arch/x86/include/asm/unistd.h
@@ -7,6 +7,7 @@
# include <asm/unistd_32.h>
# define __ARCH_WANT_IPC_PARSE_VERSION
# define __ARCH_WANT_STAT64
+# define __ARCH_WANT_SYS_IPC
# define __ARCH_WANT_SYS_OLD_MMAP
# define __ARCH_WANT_SYS_OLD_SELECT
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 8e862aaf0d9..becf47b8173 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -65,7 +65,7 @@
* UV2: Bit 19 selects between
* (0): 10 microsecond timebase and
* (1): 80 microseconds
- * we're using 655us, similar to UV1: 65 units of 10us
+ * we're using 560us, similar to UV1: 65 units of 10us
*/
#define UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD (9UL)
#define UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD (15UL)
@@ -167,6 +167,7 @@
#define FLUSH_RETRY_TIMEOUT 2
#define FLUSH_GIVEUP 3
#define FLUSH_COMPLETE 4
+#define FLUSH_RETRY_BUSYBUG 5
/*
* tuning the action when the numalink network is extremely delayed
@@ -235,10 +236,10 @@ struct bau_msg_payload {
/*
- * Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
+ * UV1 Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
* see table 4.2.3.0.1 in broacast_assist spec.
*/
-struct bau_msg_header {
+struct uv1_bau_msg_header {
unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */
/* bits 5:0 */
unsigned int base_dest_nasid:15; /* nasid of the first bit */
@@ -318,19 +319,87 @@ struct bau_msg_header {
};
/*
+ * UV2 Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
+ * see figure 9-2 of harp_sys.pdf
+ */
+struct uv2_bau_msg_header {
+ unsigned int base_dest_nasid:15; /* nasid of the first bit */
+ /* bits 14:0 */ /* in uvhub map */
+ unsigned int dest_subnodeid:5; /* must be 0x10, for the LB */
+ /* bits 19:15 */
+ unsigned int rsvd_1:1; /* must be zero */
+ /* bit 20 */
+ /* Address bits 59:21 */
+ /* bits 25:2 of address (44:21) are payload */
+ /* these next 24 bits become bytes 12-14 of msg */
+ /* bits 28:21 land in byte 12 */
+ unsigned int replied_to:1; /* sent as 0 by the source to
+ byte 12 */
+ /* bit 21 */
+ unsigned int msg_type:3; /* software type of the
+ message */
+ /* bits 24:22 */
+ unsigned int canceled:1; /* message canceled, resource
+ is to be freed*/
+ /* bit 25 */
+ unsigned int payload_1:3; /* not currently used */
+ /* bits 28:26 */
+
+ /* bits 36:29 land in byte 13 */
+ unsigned int payload_2a:3; /* not currently used */
+ unsigned int payload_2b:5; /* not currently used */
+ /* bits 36:29 */
+
+ /* bits 44:37 land in byte 14 */
+ unsigned int payload_3:8; /* not currently used */
+ /* bits 44:37 */
+
+ unsigned int rsvd_2:7; /* reserved */
+ /* bits 51:45 */
+ unsigned int swack_flag:1; /* software acknowledge flag */
+ /* bit 52 */
+ unsigned int rsvd_3a:3; /* must be zero */
+ unsigned int rsvd_3b:8; /* must be zero */
+ unsigned int rsvd_3c:8; /* must be zero */
+ unsigned int rsvd_3d:3; /* must be zero */
+ /* bits 74:53 */
+ unsigned int fairness:3; /* usually zero */
+ /* bits 77:75 */
+
+ unsigned int sequence:16; /* message sequence number */
+ /* bits 93:78 Suppl_A */
+ unsigned int chaining:1; /* next descriptor is part of
+ this activation*/
+ /* bit 94 */
+ unsigned int multilevel:1; /* multi-level multicast
+ format */
+ /* bit 95 */
+ unsigned int rsvd_4:24; /* ordered / source node /
+ source subnode / aging
+ must be zero */
+ /* bits 119:96 */
+ unsigned int command:8; /* message type */
+ /* bits 127:120 */
+};
+
+/*
* The activation descriptor:
* The format of the message to send, plus all accompanying control
* Should be 64 bytes
*/
struct bau_desc {
- struct pnmask distribution;
+ struct pnmask distribution;
/*
* message template, consisting of header and payload:
*/
- struct bau_msg_header header;
- struct bau_msg_payload payload;
+ union bau_msg_header {
+ struct uv1_bau_msg_header uv1_hdr;
+ struct uv2_bau_msg_header uv2_hdr;
+ } header;
+
+ struct bau_msg_payload payload;
};
-/*
+/* UV1:
* -payload-- ---------header------
* bytes 0-11 bits 41-56 bits 58-81
* A B (2) C (3)
@@ -340,6 +409,16 @@ struct bau_desc {
* bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector)
* ------------payload queue-----------
*/
+/* UV2:
+ * -payload-- ---------header------
+ * bytes 0-11 bits 70-78 bits 21-44
+ * A B (2) C (3)
+ *
+ * A/B/C are moved to:
+ * A C B
+ * bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector)
+ * ------------payload queue-----------
+ */
/*
* The payload queue on the destination side is an array of these.
@@ -385,7 +464,6 @@ struct bau_pq_entry {
struct msg_desc {
struct bau_pq_entry *msg;
int msg_slot;
- int swack_slot;
struct bau_pq_entry *queue_first;
struct bau_pq_entry *queue_last;
};
@@ -405,6 +483,7 @@ struct ptc_stats {
requests */
unsigned long s_stimeout; /* source side timeouts */
unsigned long s_dtimeout; /* destination side timeouts */
+ unsigned long s_strongnacks; /* number of strong nack's */
unsigned long s_time; /* time spent in sending side */
unsigned long s_retriesok; /* successful retries */
unsigned long s_ntargcpu; /* total number of cpu's
@@ -439,6 +518,9 @@ struct ptc_stats {
unsigned long s_retry_messages; /* retry broadcasts */
unsigned long s_bau_reenabled; /* for bau enable/disable */
unsigned long s_bau_disabled; /* for bau enable/disable */
+ unsigned long s_uv2_wars; /* uv2 workaround, perm. busy */
+ unsigned long s_uv2_wars_hw; /* uv2 workaround, hiwater */
+ unsigned long s_uv2_war_waits; /* uv2 workaround, long waits */
/* destination statistics */
unsigned long d_alltlb; /* times all tlb's on this
cpu were flushed */
@@ -511,9 +593,12 @@ struct bau_control {
short osnode;
short uvhub_cpu;
short uvhub;
+ short uvhub_version;
short cpus_in_socket;
short cpus_in_uvhub;
short partition_base_pnode;
+ short using_desc; /* an index, like uvhub_cpu */
+ unsigned int inuse_map;
unsigned short message_number;
unsigned short uvhub_quiesce;
short socket_acknowledge_count[DEST_Q_SIZE];
@@ -531,6 +616,7 @@ struct bau_control {
int cong_response_us;
int cong_reps;
int cong_period;
+ unsigned long clocks_per_100_usec;
cycles_t period_time;
long period_requests;
struct hub_and_pnode *thp;
@@ -591,6 +677,11 @@ static inline void write_mmr_sw_ack(unsigned long mr)
uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr);
}
+static inline void write_gmmr_sw_ack(int pnode, unsigned long mr)
+{
+ write_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr);
+}
+
static inline unsigned long read_mmr_sw_ack(void)
{
return read_lmmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 54a13aaebc4..21f7385badb 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -318,13 +318,13 @@ uv_gpa_in_mmr_space(unsigned long gpa)
/* UV global physical address --> socket phys RAM */
static inline unsigned long uv_gpa_to_soc_phys_ram(unsigned long gpa)
{
- unsigned long paddr = gpa & uv_hub_info->gpa_mask;
+ unsigned long paddr;
unsigned long remap_base = uv_hub_info->lowmem_remap_base;
unsigned long remap_top = uv_hub_info->lowmem_remap_top;
gpa = ((gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift) |
((gpa >> uv_hub_info->n_lshift) << uv_hub_info->m_val);
- gpa = gpa & uv_hub_info->gpa_mask;
+ paddr = gpa & uv_hub_info->gpa_mask;
if (paddr >= remap_base && paddr < remap_base + remap_top)
paddr -= remap_base;
return paddr;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-20 20:24:52 +0000