diff options
Diffstat (limited to 'arch/x86/kernel/acpi/wakeup_64.S')
| -rw-r--r-- | arch/x86/kernel/acpi/wakeup_64.S | 456 |
1 files changed, 456 insertions, 0 deletions
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S new file mode 100644 index 00000000000..8b4357e1efe --- /dev/null +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -0,0 +1,456 @@ +.text +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/msr.h> + +# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2 +# +# wakeup_code runs in real mode, and at unknown address (determined at run-time). +# Therefore it must only use relative jumps/calls. +# +# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled +# +# If physical address of wakeup_code is 0x12345, BIOS should call us with +# cs = 0x1234, eip = 0x05 +# + +#define BEEP \ + inb $97, %al; \ + outb %al, $0x80; \ + movb $3, %al; \ + outb %al, $97; \ + outb %al, $0x80; \ + movb $-74, %al; \ + outb %al, $67; \ + outb %al, $0x80; \ + movb $-119, %al; \ + outb %al, $66; \ + outb %al, $0x80; \ + movb $15, %al; \ + outb %al, $66; + + +ALIGN + .align 16 +ENTRY(wakeup_start) +wakeup_code: + wakeup_code_start = . + .code16 + +# Running in *copy* of this code, somewhere in low 1MB. + + movb $0xa1, %al ; outb %al, $0x80 + cli + cld + # setup data segment + movw %cs, %ax + movw %ax, %ds # Make ds:0 point to wakeup_start + movw %ax, %ss + + # Data segment must be set up before we can see whether to beep. + testl $4, realmode_flags - wakeup_code + jz 1f + BEEP +1: + + # Private stack is needed for ASUS board + mov $(wakeup_stack - wakeup_code), %sp + + pushl $0 # Kill any dangerous flags + popfl + + movl real_magic - wakeup_code, %eax + cmpl $0x12345678, %eax + jne bogus_real_magic + + call verify_cpu # Verify the cpu supports long + # mode + testl %eax, %eax + jnz no_longmode + + testl $1, realmode_flags - wakeup_code + jz 1f + lcall $0xc000,$3 + movw %cs, %ax + movw %ax, %ds # Bios might have played with that + movw %ax, %ss +1: + + testl $2, realmode_flags - wakeup_code + jz 1f + mov video_mode - wakeup_code, %ax + call mode_set +1: + + movw $0xb800, %ax + movw %ax,%fs + movw $0x0e00 + 'L', %fs:(0x10) + + movb $0xa2, %al ; outb %al, $0x80 + + mov %ds, %ax # Find 32bit wakeup_code addr + movzx %ax, %esi # (Convert %ds:gdt to a liner ptr) + shll $4, %esi + # Fix up the vectors + addl %esi, wakeup_32_vector - wakeup_code + addl %esi, wakeup_long64_vector - wakeup_code + addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer + + lidtl %ds:idt_48a - wakeup_code + lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is + # appropriate + + movl $1, %eax # protected mode (PE) bit + lmsw %ax # This is it! + jmp 1f +1: + + ljmpl *(wakeup_32_vector - wakeup_code) + + .balign 4 +wakeup_32_vector: + .long wakeup_32 - wakeup_code + .word __KERNEL32_CS, 0 + + .code32 +wakeup_32: +# Running in this code, but at low address; paging is not yet turned on. + movb $0xa5, %al ; outb %al, $0x80 + + movl $__KERNEL_DS, %eax + movl %eax, %ds + + movw $0x0e00 + 'i', %ds:(0xb8012) + movb $0xa8, %al ; outb %al, $0x80; + + /* + * Prepare for entering 64bits mode + */ + + /* Enable PAE */ + xorl %eax, %eax + btsl $5, %eax + movl %eax, %cr4 + + /* Setup early boot stage 4 level pagetables */ + leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax + movl %eax, %cr3 + + /* Check if nx is implemented */ + movl $0x80000001, %eax + cpuid + movl %edx,%edi + + /* Enable Long Mode */ + xorl %eax, %eax + btsl $_EFER_LME, %eax + + /* No Execute supported? */ + btl $20,%edi + jnc 1f + btsl $_EFER_NX, %eax + + /* Make changes effective */ +1: movl $MSR_EFER, %ecx + xorl %edx, %edx + wrmsr + + xorl %eax, %eax + btsl $31, %eax /* Enable paging and in turn activate Long Mode */ + btsl $0, %eax /* Enable protected mode */ + + /* Make changes effective */ + movl %eax, %cr0 + + /* At this point: + CR4.PAE must be 1 + CS.L must be 0 + CR3 must point to PML4 + Next instruction must be a branch + This must be on identity-mapped page + */ + /* + * At this point we're in long mode but in 32bit compatibility mode + * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn + * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + */ + + /* Finally jump in 64bit mode */ + ljmp *(wakeup_long64_vector - wakeup_code)(%esi) + + .balign 4 +wakeup_long64_vector: + .long wakeup_long64 - wakeup_code + .word __KERNEL_CS, 0 + +.code64 + + /* Hooray, we are in Long 64-bit mode (but still running in + * low memory) + */ +wakeup_long64: + /* + * We must switch to a new descriptor in kernel space for the GDT + * because soon the kernel won't have access anymore to the userspace + * addresses where we're currently running on. We have to do that here + * because in 32bit we couldn't load a 64bit linear address. + */ + lgdt cpu_gdt_descr + + movw $0x0e00 + 'n', %ds:(0xb8014) + movb $0xa9, %al ; outb %al, $0x80 + + movq saved_magic, %rax + movq $0x123456789abcdef0, %rdx + cmpq %rdx, %rax + jne bogus_64_magic + + movw $0x0e00 + 'u', %ds:(0xb8016) + + nop + nop + movw $__KERNEL_DS, %ax + movw %ax, %ss + movw %ax, %ds + movw %ax, %es + movw %ax, %fs + movw %ax, %gs + movq saved_rsp, %rsp + + movw $0x0e00 + 'x', %ds:(0xb8018) + movq saved_rbx, %rbx + movq saved_rdi, %rdi + movq saved_rsi, %rsi + movq saved_rbp, %rbp + + movw $0x0e00 + '!', %ds:(0xb801a) + movq saved_rip, %rax + jmp *%rax + +.code32 + + .align 64 +gdta: + /* Its good to keep gdt in sync with one in trampoline.S */ + .word 0, 0, 0, 0 # dummy + /* ??? Why I need the accessed bit set in order for this to work? */ + .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DS + +idt_48a: + .word 0 # idt limit = 0 + .word 0, 0 # idt base = 0L + +gdt_48a: + .word 0x800 # gdt limit=2048, + # 256 GDT entries + .long gdta - wakeup_code # gdt base (relocated in later) + +real_magic: .quad 0 +video_mode: .quad 0 +realmode_flags: .quad 0 + +.code16 +bogus_real_magic: + movb $0xba,%al ; outb %al,$0x80 + jmp bogus_real_magic + +.code64 +bogus_64_magic: + movb $0xb3,%al ; outb %al,$0x80 + jmp bogus_64_magic + +.code16 +no_longmode: + movb $0xbc,%al ; outb %al,$0x80 + jmp no_longmode + +#include "../verify_cpu_64.S" + +/* This code uses an extended set of video mode numbers. These include: + * Aliases for standard modes + * NORMAL_VGA (-1) + * EXTENDED_VGA (-2) + * ASK_VGA (-3) + * Video modes numbered by menu position -- NOT RECOMMENDED because of lack + * of compatibility when extending the table. These are between 0x00 and 0xff. + */ +#define VIDEO_FIRST_MENU 0x0000 + +/* Standard BIOS video modes (BIOS number + 0x0100) */ +#define VIDEO_FIRST_BIOS 0x0100 + +/* VESA BIOS video modes (VESA number + 0x0200) */ +#define VIDEO_FIRST_VESA 0x0200 + +/* Video7 special modes (BIOS number + 0x0900) */ +#define VIDEO_FIRST_V7 0x0900 + +# Setting of user mode (AX=mode ID) => CF=success + +# For now, we only handle VESA modes (0x0200..0x03ff). To handle other +# modes, we should probably compile in the video code from the boot +# directory. +.code16 +mode_set: + movw %ax, %bx + subb $VIDEO_FIRST_VESA>>8, %bh + cmpb $2, %bh + jb check_vesa + +setbad: + clc + ret + +check_vesa: + orw $0x4000, %bx # Use linear frame buffer + movw $0x4f02, %ax # VESA BIOS mode set call + int $0x10 + cmpw $0x004f, %ax # AL=4f if implemented + jnz setbad # AH=0 if OK + + stc + ret + +wakeup_stack_begin: # Stack grows down + +.org 0xff0 +wakeup_stack: # Just below end of page + +.org 0x1000 +ENTRY(wakeup_level4_pgt) + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 510,8,0 + /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ + .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE + +ENTRY(wakeup_end) + +## +# acpi_copy_wakeup_routine +# +# Copy the above routine to low memory. +# +# Parameters: +# %rdi: place to copy wakeup routine to +# +# Returned address is location of code in low memory (past data and stack) +# + .code64 +ENTRY(acpi_copy_wakeup_routine) + pushq %rax + pushq %rdx + + movl saved_video_mode, %edx + movl %edx, video_mode - wakeup_start (,%rdi) + movl acpi_realmode_flags, %edx + movl %edx, realmode_flags - wakeup_start (,%rdi) + movq $0x12345678, real_magic - wakeup_start (,%rdi) + movq $0x123456789abcdef0, %rdx + movq %rdx, saved_magic + + movq saved_magic, %rax + movq $0x123456789abcdef0, %rdx + cmpq %rdx, %rax + jne bogus_64_magic + + # restore the regs we used + popq %rdx + popq %rax +ENTRY(do_suspend_lowlevel_s4bios) + ret + + .align 2 + .p2align 4,,15 +.globl do_suspend_lowlevel + .type do_suspend_lowlevel,@function +do_suspend_lowlevel: +.LFB5: + subq $8, %rsp + xorl %eax, %eax + call save_processor_state + + movq %rsp, saved_context_esp(%rip) + movq %rax, saved_context_eax(%rip) + movq %rbx, saved_context_ebx(%rip) + movq %rcx, saved_context_ecx(%rip) + movq %rdx, saved_context_edx(%rip) + movq %rbp, saved_context_ebp(%rip) + movq %rsi, saved_context_esi(%rip) + movq %rdi, saved_context_edi(%rip) + movq %r8, saved_context_r08(%rip) + movq %r9, saved_context_r09(%rip) + movq %r10, saved_context_r10(%rip) + movq %r11, saved_context_r11(%rip) + movq %r12, saved_context_r12(%rip) + movq %r13, saved_context_r13(%rip) + movq %r14, saved_context_r14(%rip) + movq %r15, saved_context_r15(%rip) + pushfq ; popq saved_context_eflags(%rip) + + movq $.L97, saved_rip(%rip) + + movq %rsp,saved_rsp + movq %rbp,saved_rbp + movq %rbx,saved_rbx + movq %rdi,saved_rdi + movq %rsi,saved_rsi + + addq $8, %rsp + movl $3, %edi + xorl %eax, %eax + jmp acpi_enter_sleep_state +.L97: + .p2align 4,,7 +.L99: + .align 4 + movl $24, %eax + movw %ax, %ds + movq saved_context+58(%rip), %rax + movq %rax, %cr4 + movq saved_context+50(%rip), %rax + movq %rax, %cr3 + movq saved_context+42(%rip), %rax + movq %rax, %cr2 + movq saved_context+34(%rip), %rax + movq %rax, %cr0 + pushq saved_context_eflags(%rip) ; popfq + movq saved_context_esp(%rip), %rsp + movq saved_context_ebp(%rip), %rbp + movq saved_context_eax(%rip), %rax + movq saved_context_ebx(%rip), %rbx + movq saved_context_ecx(%rip), %rcx + movq saved_context_edx(%rip), %rdx + movq saved_context_esi(%rip), %rsi + movq saved_context_edi(%rip), %rdi + movq saved_context_r08(%rip), %r8 + movq saved_context_r09(%rip), %r9 + movq saved_context_r10(%rip), %r10 + movq saved_context_r11(%rip), %r11 + movq saved_context_r12(%rip), %r12 + movq saved_context_r13(%rip), %r13 + movq saved_context_r14(%rip), %r14 + movq saved_context_r15(%rip), %r15 + + xorl %eax, %eax + addq $8, %rsp + jmp restore_processor_state +.LFE5: +.Lfe5: + .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel + +.data +ALIGN +ENTRY(saved_rbp) .quad 0 +ENTRY(saved_rsi) .quad 0 +ENTRY(saved_rdi) .quad 0 +ENTRY(saved_rbx) .quad 0 + +ENTRY(saved_rip) .quad 0 +ENTRY(saved_rsp) .quad 0 + +ENTRY(saved_magic) .quad 0 |