diff options
Diffstat (limited to 'arch/x86/kernel/apic.c')
-rw-r--r-- | arch/x86/kernel/apic.c | 127 |
1 files changed, 54 insertions, 73 deletions
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c index 16f94879b52..20c6e12c047 100644 --- a/arch/x86/kernel/apic.c +++ b/arch/x86/kernel/apic.c @@ -441,6 +441,7 @@ static void lapic_timer_setup(enum clock_event_mode mode, v = apic_read(APIC_LVTT); v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); apic_write(APIC_LVTT, v); + apic_write(APIC_TMICT, 0xffffffff); break; case CLOCK_EVT_MODE_RESUME: /* Nothing to do here */ @@ -559,13 +560,13 @@ static int __init calibrate_by_pmtimer(long deltapm, long *delta) } else { res = (((u64)deltapm) * mult) >> 22; do_div(res, 1000000); - printk(KERN_WARNING "APIC calibration not consistent " + pr_warning("APIC calibration not consistent " "with PM Timer: %ldms instead of 100ms\n", (long)res); /* Correct the lapic counter value */ res = (((u64)(*delta)) * pm_100ms); do_div(res, deltapm); - printk(KERN_INFO "APIC delta adjusted to PM-Timer: " + pr_info("APIC delta adjusted to PM-Timer: " "%lu (%ld)\n", (unsigned long)res, *delta); *delta = (long)res; } @@ -645,8 +646,7 @@ static int __init calibrate_APIC_clock(void) */ if (calibration_result < (1000000 / HZ)) { local_irq_enable(); - printk(KERN_WARNING - "APIC frequency too slow, disabling apic timer\n"); + pr_warning("APIC frequency too slow, disabling apic timer\n"); return -1; } @@ -672,13 +672,9 @@ static int __init calibrate_APIC_clock(void) while (lapic_cal_loops <= LAPIC_CAL_LOOPS) cpu_relax(); - local_irq_disable(); - /* Stop the lapic timer */ lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt); - local_irq_enable(); - /* Jiffies delta */ deltaj = lapic_cal_j2 - lapic_cal_j1; apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj); @@ -692,8 +688,7 @@ static int __init calibrate_APIC_clock(void) local_irq_enable(); if (levt->features & CLOCK_EVT_FEAT_DUMMY) { - printk(KERN_WARNING - "APIC timer disabled due to verification failure.\n"); + pr_warning("APIC timer disabled due to verification failure.\n"); return -1; } @@ -714,7 +709,7 @@ void __init setup_boot_APIC_clock(void) * broadcast mechanism is used. On UP systems simply ignore it. */ if (disable_apic_timer) { - printk(KERN_INFO "Disabling APIC timer\n"); + pr_info("Disabling APIC timer\n"); /* No broadcast on UP ! */ if (num_possible_cpus() > 1) { lapic_clockevent.mult = 1; @@ -741,7 +736,7 @@ void __init setup_boot_APIC_clock(void) if (nmi_watchdog != NMI_IO_APIC) lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; else - printk(KERN_WARNING "APIC timer registered as dummy," + pr_warning("APIC timer registered as dummy," " due to nmi_watchdog=%d!\n", nmi_watchdog); /* Setup the lapic or request the broadcast */ @@ -773,8 +768,7 @@ static void local_apic_timer_interrupt(void) * spurious. */ if (!evt->event_handler) { - printk(KERN_WARNING - "Spurious LAPIC timer interrupt on cpu %d\n", cpu); + pr_warning("Spurious LAPIC timer interrupt on cpu %d\n", cpu); /* Switch it off */ lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt); return; @@ -814,9 +808,7 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) * Besides, if we don't timer interrupts ignore the global * interrupt lock, which is the WrongThing (tm) to do. */ -#ifdef CONFIG_X86_64 exit_idle(); -#endif irq_enter(); local_apic_timer_interrupt(); irq_exit(); @@ -1093,7 +1085,7 @@ static void __cpuinit lapic_setup_esr(void) unsigned int oldvalue, value, maxlvt; if (!lapic_is_integrated()) { - printk(KERN_INFO "No ESR for 82489DX.\n"); + pr_info("No ESR for 82489DX.\n"); return; } @@ -1104,7 +1096,7 @@ static void __cpuinit lapic_setup_esr(void) * ESR disabled - we can't do anything useful with the * errors anyway - mbligh */ - printk(KERN_INFO "Leaving ESR disabled.\n"); + pr_info("Leaving ESR disabled.\n"); return; } @@ -1298,7 +1290,7 @@ void check_x2apic(void) rdmsr(MSR_IA32_APICBASE, msr, msr2); if (msr & X2APIC_ENABLE) { - printk("x2apic enabled by BIOS, switching to x2apic ops\n"); + pr_info("x2apic enabled by BIOS, switching to x2apic ops\n"); x2apic_preenabled = x2apic = 1; apic_ops = &x2apic_ops; } @@ -1310,7 +1302,7 @@ void enable_x2apic(void) rdmsr(MSR_IA32_APICBASE, msr, msr2); if (!(msr & X2APIC_ENABLE)) { - printk("Enabling x2apic\n"); + pr_info("Enabling x2apic\n"); wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0); } } @@ -1325,9 +1317,8 @@ void __init enable_IR_x2apic(void) return; if (!x2apic_preenabled && disable_x2apic) { - printk(KERN_INFO - "Skipped enabling x2apic and Interrupt-remapping " - "because of nox2apic\n"); + pr_info("Skipped enabling x2apic and Interrupt-remapping " + "because of nox2apic\n"); return; } @@ -1335,22 +1326,19 @@ void __init enable_IR_x2apic(void) panic("Bios already enabled x2apic, can't enforce nox2apic"); if (!x2apic_preenabled && skip_ioapic_setup) { - printk(KERN_INFO - "Skipped enabling x2apic and Interrupt-remapping " - "because of skipping io-apic setup\n"); + pr_info("Skipped enabling x2apic and Interrupt-remapping " + "because of skipping io-apic setup\n"); return; } ret = dmar_table_init(); if (ret) { - printk(KERN_INFO - "dmar_table_init() failed with %d:\n", ret); + pr_info("dmar_table_init() failed with %d:\n", ret); if (x2apic_preenabled) panic("x2apic enabled by bios. But IR enabling failed"); else - printk(KERN_INFO - "Not enabling x2apic,Intr-remapping\n"); + pr_info("Not enabling x2apic,Intr-remapping\n"); return; } @@ -1359,7 +1347,7 @@ void __init enable_IR_x2apic(void) ret = save_mask_IO_APIC_setup(); if (ret) { - printk(KERN_INFO "Saving IO-APIC state failed: %d\n", ret); + pr_info("Saving IO-APIC state failed: %d\n", ret); goto end; } @@ -1394,14 +1382,11 @@ end: if (!ret) { if (!x2apic_preenabled) - printk(KERN_INFO - "Enabled x2apic and interrupt-remapping\n"); + pr_info("Enabled x2apic and interrupt-remapping\n"); else - printk(KERN_INFO - "Enabled Interrupt-remapping\n"); + pr_info("Enabled Interrupt-remapping\n"); } else - printk(KERN_ERR - "Failed to enable Interrupt-remapping and x2apic\n"); + pr_err("Failed to enable Interrupt-remapping and x2apic\n"); #else if (!cpu_has_x2apic) return; @@ -1410,8 +1395,8 @@ end: panic("x2apic enabled prior OS handover," " enable CONFIG_INTR_REMAP"); - printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping " - " and x2apic\n"); + pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping " + " and x2apic\n"); #endif return; @@ -1428,7 +1413,7 @@ end: static int __init detect_init_APIC(void) { if (!cpu_has_apic) { - printk(KERN_INFO "No local APIC present\n"); + pr_info("No local APIC present\n"); return -1; } @@ -1469,8 +1454,8 @@ static int __init detect_init_APIC(void) * "lapic" specified. */ if (!force_enable_local_apic) { - printk(KERN_INFO "Local APIC disabled by BIOS -- " - "you can enable it with \"lapic\"\n"); + pr_info("Local APIC disabled by BIOS -- " + "you can enable it with \"lapic\"\n"); return -1; } /* @@ -1480,8 +1465,7 @@ static int __init detect_init_APIC(void) */ rdmsr(MSR_IA32_APICBASE, l, h); if (!(l & MSR_IA32_APICBASE_ENABLE)) { - printk(KERN_INFO - "Local APIC disabled by BIOS -- reenabling.\n"); + pr_info("Local APIC disabled by BIOS -- reenabling.\n"); l &= ~MSR_IA32_APICBASE_BASE; l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; wrmsr(MSR_IA32_APICBASE, l, h); @@ -1494,7 +1478,7 @@ static int __init detect_init_APIC(void) */ features = cpuid_edx(1); if (!(features & (1 << X86_FEATURE_APIC))) { - printk(KERN_WARNING "Could not enable APIC!\n"); + pr_warning("Could not enable APIC!\n"); return -1; } set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); @@ -1505,14 +1489,14 @@ static int __init detect_init_APIC(void) if (l & MSR_IA32_APICBASE_ENABLE) mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - printk(KERN_INFO "Found and enabled local APIC!\n"); + pr_info("Found and enabled local APIC!\n"); apic_pm_activate(); return 0; no_apic: - printk(KERN_INFO "No local APIC present or hardware disabled\n"); + pr_info("No local APIC present or hardware disabled\n"); return -1; } #endif @@ -1588,12 +1572,12 @@ int __init APIC_init_uniprocessor(void) { #ifdef CONFIG_X86_64 if (disable_apic) { - printk(KERN_INFO "Apic disabled\n"); + pr_info("Apic disabled\n"); return -1; } if (!cpu_has_apic) { disable_apic = 1; - printk(KERN_INFO "Apic disabled by BIOS\n"); + pr_info("Apic disabled by BIOS\n"); return -1; } #else @@ -1605,8 +1589,8 @@ int __init APIC_init_uniprocessor(void) */ if (!cpu_has_apic && APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { - printk(KERN_ERR "BIOS bug, local APIC 0x%x not detected!...\n", - boot_cpu_physical_apicid); + pr_err("BIOS bug, local APIC 0x%x not detected!...\n", + boot_cpu_physical_apicid); clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); return -1; } @@ -1682,9 +1666,7 @@ void smp_spurious_interrupt(struct pt_regs *regs) { u32 v; -#ifdef CONFIG_X86_64 exit_idle(); -#endif irq_enter(); /* * Check if this really is a spurious interrupt and ACK it @@ -1699,8 +1681,8 @@ void smp_spurious_interrupt(struct pt_regs *regs) add_pda(irq_spurious_count, 1); #else /* see sw-dev-man vol 3, chapter 7.4.13.5 */ - printk(KERN_INFO "spurious APIC interrupt on CPU#%d, " - "should never happen.\n", smp_processor_id()); + pr_info("spurious APIC interrupt on CPU#%d, " + "should never happen.\n", smp_processor_id()); __get_cpu_var(irq_stat).irq_spurious_count++; #endif irq_exit(); @@ -1713,9 +1695,7 @@ void smp_error_interrupt(struct pt_regs *regs) { u32 v, v1; -#ifdef CONFIG_X86_64 exit_idle(); -#endif irq_enter(); /* First tickle the hardware, only then report what went on. -- REW */ v = apic_read(APIC_ESR); @@ -1724,17 +1704,18 @@ void smp_error_interrupt(struct pt_regs *regs) ack_APIC_irq(); atomic_inc(&irq_err_count); - /* Here is what the APIC error bits mean: - 0: Send CS error - 1: Receive CS error - 2: Send accept error - 3: Receive accept error - 4: Reserved - 5: Send illegal vector - 6: Received illegal vector - 7: Illegal register address - */ - printk(KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n", + /* + * Here is what the APIC error bits mean: + * 0: Send CS error + * 1: Receive CS error + * 2: Send accept error + * 3: Receive accept error + * 4: Reserved + * 5: Send illegal vector + * 6: Received illegal vector + * 7: Illegal register address + */ + pr_debug("APIC error on CPU%d: %02x(%02x)\n", smp_processor_id(), v , v1); irq_exit(); } @@ -1838,15 +1819,15 @@ void __cpuinit generic_processor_info(int apicid, int version) * Validate version */ if (version == 0x0) { - printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " - "fixing up to 0x10. (tell your hw vendor)\n", - version); + pr_warning("BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + version); version = 0x10; } apic_version[apicid] = version; if (num_processors >= NR_CPUS) { - printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." + pr_warning("WARNING: NR_CPUS limit of %i reached." " Processor ignored.\n", NR_CPUS); return; } @@ -2209,7 +2190,7 @@ static int __init apic_set_verbosity(char *arg) else if (strcmp("verbose", arg) == 0) apic_verbosity = APIC_VERBOSE; else { - printk(KERN_WARNING "APIC Verbosity level %s not recognised" + pr_warning("APIC Verbosity level %s not recognised" " use apic=verbose or apic=debug\n", arg); return -EINVAL; } |