summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/apic/apic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/apic/apic.c')
-rw-r--r--arch/x86/kernel/apic/apic.c150
1 files changed, 80 insertions, 70 deletions
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 76b96d74978..966673f4414 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -43,6 +43,7 @@
#include <asm/i8259.h>
#include <asm/proto.h>
#include <asm/apic.h>
+#include <asm/io_apic.h>
#include <asm/desc.h>
#include <asm/hpet.h>
#include <asm/idle.h>
@@ -78,12 +79,21 @@ EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
#ifdef CONFIG_X86_32
+
+/*
+ * On x86_32, the mapping between cpu and logical apicid may vary
+ * depending on apic in use. The following early percpu variable is
+ * used for the mapping. This is where the behaviors of x86_64 and 32
+ * actually diverge. Let's keep it ugly for now.
+ */
+DEFINE_EARLY_PER_CPU(int, x86_cpu_to_logical_apicid, BAD_APICID);
+
/*
* Knob to control our willingness to enable the local APIC.
*
* +1=force-enable
*/
-static int force_enable_local_apic;
+static int force_enable_local_apic __initdata;
/*
* APIC command line parameters
*/
@@ -153,7 +163,7 @@ early_param("nox2apic", setup_nox2apic);
unsigned long mp_lapic_addr;
int disable_apic;
/* Disable local APIC timer from the kernel commandline or via dmi quirk */
-static int disable_apic_timer __cpuinitdata;
+static int disable_apic_timer __initdata;
/* Local APIC timer works in C2 */
int local_apic_timer_c2_ok;
EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
@@ -177,29 +187,8 @@ static struct resource lapic_resource = {
static unsigned int calibration_result;
-static int lapic_next_event(unsigned long delta,
- struct clock_event_device *evt);
-static void lapic_timer_setup(enum clock_event_mode mode,
- struct clock_event_device *evt);
-static void lapic_timer_broadcast(const struct cpumask *mask);
static void apic_pm_activate(void);
-/*
- * The local apic timer can be used for any function which is CPU local.
- */
-static struct clock_event_device lapic_clockevent = {
- .name = "lapic",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
- | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
- .shift = 32,
- .set_mode = lapic_timer_setup,
- .set_next_event = lapic_next_event,
- .broadcast = lapic_timer_broadcast,
- .rating = 100,
- .irq = -1,
-};
-static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
-
static unsigned long apic_phys;
/*
@@ -238,7 +227,7 @@ static int modern_apic(void)
* right after this call apic become NOOP driven
* so apic->write/read doesn't do anything
*/
-void apic_disable(void)
+static void __init apic_disable(void)
{
pr_info("APIC: switched to apic NOOP\n");
apic = &apic_noop;
@@ -282,23 +271,6 @@ u64 native_apic_icr_read(void)
return icr1 | ((u64)icr2 << 32);
}
-/**
- * enable_NMI_through_LVT0 - enable NMI through local vector table 0
- */
-void __cpuinit enable_NMI_through_LVT0(void)
-{
- unsigned int v;
-
- /* unmask and set to NMI */
- v = APIC_DM_NMI;
-
- /* Level triggered for 82489DX (32bit mode) */
- if (!lapic_is_integrated())
- v |= APIC_LVT_LEVEL_TRIGGER;
-
- apic_write(APIC_LVT0, v);
-}
-
#ifdef CONFIG_X86_32
/**
* get_physical_broadcast - Get number of physical broadcast IDs
@@ -508,6 +480,23 @@ static void lapic_timer_broadcast(const struct cpumask *mask)
#endif
}
+
+/*
+ * The local apic timer can be used for any function which is CPU local.
+ */
+static struct clock_event_device lapic_clockevent = {
+ .name = "lapic",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
+ | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
+ .shift = 32,
+ .set_mode = lapic_timer_setup,
+ .set_next_event = lapic_next_event,
+ .broadcast = lapic_timer_broadcast,
+ .rating = 100,
+ .irq = -1,
+};
+static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
+
/*
* Setup the local APIC timer for this CPU. Copy the initialized values
* of the boot CPU and register the clock event in the framework.
@@ -1209,7 +1198,7 @@ void __cpuinit setup_local_APIC(void)
rdtscll(tsc);
if (disable_apic) {
- arch_disable_smp_support();
+ disable_ioapic_support();
return;
}
@@ -1237,6 +1226,19 @@ void __cpuinit setup_local_APIC(void)
*/
apic->init_apic_ldr();
+#ifdef CONFIG_X86_32
+ /*
+ * APIC LDR is initialized. If logical_apicid mapping was
+ * initialized during get_smp_config(), make sure it matches the
+ * actual value.
+ */
+ i = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
+ WARN_ON(i != BAD_APICID && i != logical_smp_processor_id());
+ /* always use the value from LDR */
+ early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
+ logical_smp_processor_id();
+#endif
+
/*
* Set Task Priority to 'accept all'. We never change this
* later on.
@@ -1448,7 +1450,7 @@ int __init enable_IR(void)
void __init enable_IR_x2apic(void)
{
unsigned long flags;
- struct IO_APIC_route_entry **ioapic_entries = NULL;
+ struct IO_APIC_route_entry **ioapic_entries;
int ret, x2apic_enabled = 0;
int dmar_table_init_ret;
@@ -1537,7 +1539,7 @@ static int __init detect_init_APIC(void)
}
#else
-static int apic_verify(void)
+static int __init apic_verify(void)
{
u32 features, h, l;
@@ -1562,7 +1564,7 @@ static int apic_verify(void)
return 0;
}
-int apic_force_enable(void)
+int __init apic_force_enable(unsigned long addr)
{
u32 h, l;
@@ -1578,7 +1580,7 @@ int apic_force_enable(void)
if (!(l & MSR_IA32_APICBASE_ENABLE)) {
pr_info("Local APIC disabled by BIOS -- reenabling.\n");
l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | addr;
wrmsr(MSR_IA32_APICBASE, l, h);
enabled_via_apicbase = 1;
}
@@ -1619,7 +1621,7 @@ static int __init detect_init_APIC(void)
"you can enable it with \"lapic\"\n");
return -1;
}
- if (apic_force_enable())
+ if (apic_force_enable(APIC_DEFAULT_PHYS_BASE))
return -1;
} else {
if (apic_verify())
@@ -1930,17 +1932,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
{
int cpu;
- /*
- * Validate version
- */
- if (version == 0x0) {
- pr_warning("BIOS bug, APIC version is 0 for CPU#%d! "
- "fixing up to 0x10. (tell your hw vendor)\n",
- version);
- version = 0x10;
- }
- apic_version[apicid] = version;
-
if (num_processors >= nr_cpu_ids) {
int max = nr_cpu_ids;
int thiscpu = max + disabled_cpus;
@@ -1954,22 +1945,34 @@ void __cpuinit generic_processor_info(int apicid, int version)
}
num_processors++;
- cpu = cpumask_next_zero(-1, cpu_present_mask);
-
- if (version != apic_version[boot_cpu_physical_apicid])
- WARN_ONCE(1,
- "ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n",
- apic_version[boot_cpu_physical_apicid], cpu, version);
-
- physid_set(apicid, phys_cpu_present_map);
if (apicid == boot_cpu_physical_apicid) {
/*
* x86_bios_cpu_apicid is required to have processors listed
* in same order as logical cpu numbers. Hence the first
* entry is BSP, and so on.
+ * boot_cpu_init() already hold bit 0 in cpu_present_mask
+ * for BSP.
*/
cpu = 0;
+ } else
+ cpu = cpumask_next_zero(-1, cpu_present_mask);
+
+ /*
+ * Validate version
+ */
+ if (version == 0x0) {
+ pr_warning("BIOS bug: APIC version is 0 for CPU %d/0x%x, fixing up to 0x10\n",
+ cpu, apicid);
+ version = 0x10;
}
+ apic_version[apicid] = version;
+
+ if (version != apic_version[boot_cpu_physical_apicid]) {
+ pr_warning("BIOS bug: APIC version mismatch, boot CPU: %x, CPU %d: version %x\n",
+ apic_version[boot_cpu_physical_apicid], cpu, version);
+ }
+
+ physid_set(apicid, phys_cpu_present_map);
if (apicid > max_physical_apicid)
max_physical_apicid = apicid;
@@ -1977,7 +1980,10 @@ void __cpuinit generic_processor_info(int apicid, int version)
early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
#endif
-
+#ifdef CONFIG_X86_32
+ early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
+ apic->x86_32_early_logical_apicid(cpu);
+#endif
set_cpu_possible(cpu, true);
set_cpu_present(cpu, true);
}
@@ -1998,10 +2004,14 @@ void default_init_apic_ldr(void)
}
#ifdef CONFIG_X86_32
-int default_apicid_to_node(int logical_apicid)
+int default_x86_32_numa_cpu_node(int cpu)
{
-#ifdef CONFIG_SMP
- return apicid_2_node[hard_smp_processor_id()];
+#ifdef CONFIG_NUMA
+ int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
+
+ if (apicid != BAD_APICID)
+ return __apicid_to_node[apicid];
+ return NUMA_NO_NODE;
#else
return 0;
#endif