diff options
Diffstat (limited to 'arch/x86/kernel/apic/io_apic.c')
| -rw-r--r-- | arch/x86/kernel/apic/io_apic.c | 52 |
1 files changed, 33 insertions, 19 deletions
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 593c4f8a8bb..64970b9885f 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -96,6 +96,11 @@ struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +/* Number of legacy interrupts */ +static int nr_legacy_irqs __read_mostly = NR_IRQS_LEGACY; +/* GSI interrupts */ +static int nr_irqs_gsi = NR_IRQS_LEGACY; + #if defined (CONFIG_MCA) || defined (CONFIG_EISA) int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif @@ -173,6 +178,12 @@ static struct irq_cfg irq_cfgx[NR_IRQS] = { [15] = { .vector = IRQ15_VECTOR, }, }; +void __init io_apic_disable_legacy(void) +{ + nr_legacy_irqs = 0; + nr_irqs_gsi = 0; +} + int __init arch_early_irq_init(void) { struct irq_cfg *cfg; @@ -190,7 +201,7 @@ int __init arch_early_irq_init(void) desc->chip_data = &cfg[i]; zalloc_cpumask_var_node(&cfg[i].domain, GFP_NOWAIT, node); zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_NOWAIT, node); - if (i < NR_IRQS_LEGACY) + if (i < nr_legacy_irqs) cpumask_setall(cfg[i].domain); } @@ -867,7 +878,7 @@ static int __init find_isa_irq_apic(int irq, int type) */ static int EISA_ELCR(unsigned int irq) { - if (irq < NR_IRQS_LEGACY) { + if (irq < nr_legacy_irqs) { unsigned int port = 0x4d0 + (irq >> 3); return (inb(port) >> (irq & 7)) & 1; } @@ -1464,7 +1475,7 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq } ioapic_register_intr(irq, desc, trigger); - if (irq < NR_IRQS_LEGACY) + if (irq < nr_legacy_irqs) disable_8259A_irq(irq); ioapic_write_entry(apic_id, pin, entry); @@ -1831,7 +1842,7 @@ __apicdebuginit(void) print_PIC(void) unsigned int v; unsigned long flags; - if (apic_verbosity == APIC_QUIET) + if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs) return; printk(KERN_DEBUG "\nprinting PIC contents\n"); @@ -1894,6 +1905,10 @@ void __init enable_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); nr_ioapic_registers[apic] = reg_01.bits.entries+1; } + + if (!nr_legacy_irqs) + return; + for(apic = 0; apic < nr_ioapics; apic++) { int pin; /* See if any of the pins is in ExtINT mode */ @@ -1948,6 +1963,9 @@ void disable_IO_APIC(void) */ clear_IO_APIC(); + if (!nr_legacy_irqs) + return; + /* * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode @@ -1994,7 +2012,7 @@ void disable_IO_APIC(void) * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 */ -static void __init setup_ioapic_ids_from_mpc(void) +void __init setup_ioapic_ids_from_mpc(void) { union IO_APIC_reg_00 reg_00; physid_mask_t phys_id_present_map; @@ -2003,9 +2021,8 @@ static void __init setup_ioapic_ids_from_mpc(void) unsigned char old_id; unsigned long flags; - if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids()) + if (acpi_ioapic) return; - /* * Don't check I/O APIC IDs for xAPIC systems. They have * no meaning without the serial APIC bus. @@ -2179,7 +2196,7 @@ static unsigned int startup_ioapic_irq(unsigned int irq) struct irq_cfg *cfg; spin_lock_irqsave(&ioapic_lock, flags); - if (irq < NR_IRQS_LEGACY) { + if (irq < nr_legacy_irqs) { disable_8259A_irq(irq); if (i8259A_irq_pending(irq)) was_pending = 1; @@ -2657,7 +2674,7 @@ static inline void init_IO_APIC_traps(void) * so default to an old-fashioned 8259 * interrupt if we can.. */ - if (irq < NR_IRQS_LEGACY) + if (irq < nr_legacy_irqs) make_8259A_irq(irq); else /* Strange. Oh, well.. */ @@ -2993,7 +3010,7 @@ out: * the I/O APIC in all cases now. No actual device should request * it anyway. --macro */ -#define PIC_IRQS (1 << PIC_CASCADE_IR) +#define PIC_IRQS (1UL << PIC_CASCADE_IR) void __init setup_IO_APIC(void) { @@ -3001,21 +3018,19 @@ void __init setup_IO_APIC(void) /* * calling enable_IO_APIC() is moved to setup_local_APIC for BP */ - - io_apic_irqs = ~PIC_IRQS; + io_apic_irqs = nr_legacy_irqs ? ~PIC_IRQS : ~0UL; apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); /* * Set up IO-APIC IRQ routing. */ -#ifdef CONFIG_X86_32 - if (!acpi_ioapic) - setup_ioapic_ids_from_mpc(); -#endif + x86_init.mpparse.setup_ioapic_ids(); + sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); - check_timer(); + if (nr_legacy_irqs) + check_timer(); } /* @@ -3116,7 +3131,6 @@ static int __init ioapic_init_sysfs(void) device_initcall(ioapic_init_sysfs); -static int nr_irqs_gsi = NR_IRQS_LEGACY; /* * Dynamic irq allocate and deallocation */ @@ -3856,7 +3870,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq, /* * IRQs < 16 are already in the irq_2_pin[] map */ - if (irq >= NR_IRQS_LEGACY) { + if (irq >= nr_legacy_irqs) { cfg = desc->chip_data; if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) { printk(KERN_INFO "can not add pin %d for irq %d\n", |