summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/apic_32.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/apic_32.c')
-rw-r--r--arch/x86/kernel/apic_32.c437
1 files changed, 253 insertions, 184 deletions
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index f88bd0d982b..a91c57cb666 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -60,10 +60,8 @@ unsigned long mp_lapic_addr;
static int force_enable_local_apic;
int disable_apic;
-/* Local APIC timer verification ok */
-static int local_apic_timer_verify_ok;
/* Disable local APIC timer from the kernel commandline or via dmi quirk */
-static int local_apic_timer_disabled;
+static int disable_apic_timer __cpuinitdata;
/* Local APIC timer works in C2 */
int local_apic_timer_c2_ok;
EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
@@ -130,7 +128,11 @@ static inline int lapic_get_version(void)
*/
static inline int lapic_is_integrated(void)
{
+#ifdef CONFIG_X86_64
+ return 1;
+#else
return APIC_INTEGRATED(lapic_get_version());
+#endif
}
/*
@@ -145,13 +147,18 @@ static int modern_apic(void)
return lapic_get_version() >= 0x14;
}
-void apic_wait_icr_idle(void)
+/*
+ * Paravirt kernels also might be using these below ops. So we still
+ * use generic apic_read()/apic_write(), which might be pointing to different
+ * ops in PARAVIRT case.
+ */
+void xapic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
cpu_relax();
}
-u32 safe_apic_wait_icr_idle(void)
+u32 safe_xapic_wait_icr_idle(void)
{
u32 send_status;
int timeout;
@@ -167,16 +174,48 @@ u32 safe_apic_wait_icr_idle(void)
return send_status;
}
+void xapic_icr_write(u32 low, u32 id)
+{
+ apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
+ apic_write(APIC_ICR, low);
+}
+
+u64 xapic_icr_read(void)
+{
+ u32 icr1, icr2;
+
+ icr2 = apic_read(APIC_ICR2);
+ icr1 = apic_read(APIC_ICR);
+
+ return icr1 | ((u64)icr2 << 32);
+}
+
+static struct apic_ops xapic_ops = {
+ .read = native_apic_mem_read,
+ .write = native_apic_mem_write,
+ .icr_read = xapic_icr_read,
+ .icr_write = xapic_icr_write,
+ .wait_icr_idle = xapic_wait_icr_idle,
+ .safe_wait_icr_idle = safe_xapic_wait_icr_idle,
+};
+
+struct apic_ops __read_mostly *apic_ops = &xapic_ops;
+EXPORT_SYMBOL_GPL(apic_ops);
+
/**
* enable_NMI_through_LVT0 - enable NMI through local vector table 0
*/
void __cpuinit enable_NMI_through_LVT0(void)
{
- unsigned int v = APIC_DM_NMI;
+ unsigned int v;
- /* Level triggered for 82489DX */
+ /* unmask and set to NMI */
+ v = APIC_DM_NMI;
+
+ /* Level triggered for 82489DX (32bit mode) */
if (!lapic_is_integrated())
v |= APIC_LVT_LEVEL_TRIGGER;
+
apic_write(APIC_LVT0, v);
}
@@ -193,9 +232,13 @@ int get_physical_broadcast(void)
*/
int lapic_get_maxlvt(void)
{
- unsigned int v = apic_read(APIC_LVR);
+ unsigned int v;
- /* 82489DXs do not report # of LVT entries. */
+ v = apic_read(APIC_LVR);
+ /*
+ * - we always have APIC integrated on 64bit mode
+ * - 82489DXs do not report # of LVT entries
+ */
return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
}
@@ -203,8 +246,12 @@ int lapic_get_maxlvt(void)
* Local APIC timer
*/
-/* Clock divisor is set to 16 */
+/* Clock divisor */
+#ifdef CONFG_X86_64
+#define APIC_DIVISOR 1
+#else
#define APIC_DIVISOR 16
+#endif
/*
* This function sets up the local APIC timer, with a timeout of
@@ -212,6 +259,9 @@ int lapic_get_maxlvt(void)
* this function twice on the boot CPU, once with a bogus timeout
* value, second time for real. The other (noncalibrating) CPUs
* call this function only once, with the real, calibrated value.
+ *
+ * We do reads before writes even if unnecessary, to get around the
+ * P5 APIC double write bug.
*/
static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
{
@@ -233,14 +283,44 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
*/
tmp_value = apic_read(APIC_TDCR);
apic_write(APIC_TDCR,
- (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
- APIC_TDR_DIV_16);
+ (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+ APIC_TDR_DIV_16);
if (!oneshot)
apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
}
/*
+ * Setup extended LVT, AMD specific (K8, family 10h)
+ *
+ * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
+ * MCE interrupts are supported. Thus MCE offset must be set to 0.
+ */
+
+#define APIC_EILVT_LVTOFF_MCE 0
+#define APIC_EILVT_LVTOFF_IBS 1
+
+static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
+{
+ unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+ unsigned int v = (mask << 16) | (msg_type << 8) | vector;
+
+ apic_write(reg, v);
+}
+
+u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
+{
+ setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
+ return APIC_EILVT_LVTOFF_MCE;
+}
+
+u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
+{
+ setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
+ return APIC_EILVT_LVTOFF_IBS;
+}
+
+/*
* Program the next event, relative to now
*/
static int lapic_next_event(unsigned long delta,
@@ -259,8 +339,8 @@ static void lapic_timer_setup(enum clock_event_mode mode,
unsigned long flags;
unsigned int v;
- /* Lapic used for broadcast ? */
- if (!local_apic_timer_verify_ok)
+ /* Lapic used as dummy for broadcast ? */
+ if (evt->features & CLOCK_EVT_FEAT_DUMMY)
return;
local_irq_save(flags);
@@ -473,7 +553,7 @@ static int __init calibrate_APIC_clock(void)
return -1;
}
- local_apic_timer_verify_ok = 1;
+ levt->features &= ~CLOCK_EVT_FEAT_DUMMY;
/* We trust the pm timer based calibration */
if (!pm_referenced) {
@@ -507,11 +587,11 @@ static int __init calibrate_APIC_clock(void)
if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
else
- local_apic_timer_verify_ok = 0;
+ levt->features |= CLOCK_EVT_FEAT_DUMMY;
} else
local_irq_enable();
- if (!local_apic_timer_verify_ok) {
+ if (levt->features & CLOCK_EVT_FEAT_DUMMY) {
printk(KERN_WARNING
"APIC timer disabled due to verification failure.\n");
return -1;
@@ -533,7 +613,8 @@ void __init setup_boot_APIC_clock(void)
* timer as a dummy clock event source on SMP systems, so the
* broadcast mechanism is used. On UP systems simply ignore it.
*/
- if (local_apic_timer_disabled) {
+ if (disable_apic_timer) {
+ printk(KERN_INFO "Disabling APIC timer\n");
/* No broadcast on UP ! */
if (num_possible_cpus() > 1) {
lapic_clockevent.mult = 1;
@@ -602,7 +683,11 @@ static void local_apic_timer_interrupt(void)
/*
* the NMI deadlock-detector uses this.
*/
+#ifdef CONFIG_X86_64
+ add_pda(apic_timer_irqs, 1);
+#else
per_cpu(irq_stat, cpu).apic_timer_irqs++;
+#endif
evt->event_handler(evt);
}
@@ -642,35 +727,6 @@ int setup_profiling_timer(unsigned int multiplier)
}
/*
- * Setup extended LVT, AMD specific (K8, family 10h)
- *
- * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
- * MCE interrupts are supported. Thus MCE offset must be set to 0.
- */
-
-#define APIC_EILVT_LVTOFF_MCE 0
-#define APIC_EILVT_LVTOFF_IBS 1
-
-static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
-{
- unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
- unsigned int v = (mask << 16) | (msg_type << 8) | vector;
- apic_write(reg, v);
-}
-
-u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
-{
- setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
- return APIC_EILVT_LVTOFF_MCE;
-}
-
-u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
-{
- setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
- return APIC_EILVT_LVTOFF_IBS;
-}
-
-/*
* Local APIC start and shutdown
*/
@@ -715,7 +771,7 @@ void clear_local_APIC(void)
}
/* lets not touch this if we didn't frob it */
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
if (maxlvt >= 5) {
v = apic_read(APIC_LVTTHMR);
apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
@@ -732,10 +788,6 @@ void clear_local_APIC(void)
if (maxlvt >= 4)
apic_write(APIC_LVTPC, APIC_LVT_MASKED);
-#ifdef CONFIG_X86_MCE_P4THERMAL
- if (maxlvt >= 5)
- apic_write(APIC_LVTTHMR, APIC_LVT_MASKED);
-#endif
/* Integrated APIC (!82489DX) ? */
if (lapic_is_integrated()) {
if (maxlvt > 3)
@@ -750,7 +802,7 @@ void clear_local_APIC(void)
*/
void disable_local_APIC(void)
{
- unsigned long value;
+ unsigned int value;
clear_local_APIC();
@@ -762,6 +814,7 @@ void disable_local_APIC(void)
value &= ~APIC_SPIV_APIC_ENABLED;
apic_write(APIC_SPIV, value);
+#ifdef CONFIG_X86_32
/*
* When LAPIC was disabled by the BIOS and enabled by the kernel,
* restore the disabled state.
@@ -773,6 +826,7 @@ void disable_local_APIC(void)
l &= ~MSR_IA32_APICBASE_ENABLE;
wrmsr(MSR_IA32_APICBASE, l, h);
}
+#endif
}
/*
@@ -789,11 +843,15 @@ void lapic_shutdown(void)
return;
local_irq_save(flags);
- clear_local_APIC();
- if (enabled_via_apicbase)
+#ifdef CONFIG_X86_32
+ if (!enabled_via_apicbase)
+ clear_local_APIC();
+ else
+#endif
disable_local_APIC();
+
local_irq_restore(flags);
}
@@ -838,6 +896,12 @@ int __init verify_local_APIC(void)
*/
reg0 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
+ apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
+ reg1 = apic_read(APIC_ID);
+ apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
+ apic_write(APIC_ID, reg0);
+ if (reg1 != (reg0 ^ APIC_ID_MASK))
+ return 0;
/*
* The next two are just to see if we have sane values.
@@ -863,14 +927,15 @@ void __init sync_Arb_IDs(void)
*/
if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
return;
+
/*
* Wait for idle.
*/
apic_wait_icr_idle();
apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
- apic_write(APIC_ICR,
- APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
+ apic_write(APIC_ICR, APIC_DEST_ALLINC |
+ APIC_INT_LEVELTRIG | APIC_DM_INIT);
}
/*
@@ -878,7 +943,7 @@ void __init sync_Arb_IDs(void)
*/
void __init init_bsp_APIC(void)
{
- unsigned long value;
+ unsigned int value;
/*
* Don't do the setup now if we have a SMP BIOS as the
@@ -899,11 +964,13 @@ void __init init_bsp_APIC(void)
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
+#ifdef CONFIG_X86_32
/* This bit is reserved on P4/Xeon and should be cleared */
if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
(boot_cpu_data.x86 == 15))
value &= ~APIC_SPIV_FOCUS_DISABLED;
else
+#endif
value |= APIC_SPIV_FOCUS_DISABLED;
value |= SPURIOUS_APIC_VECTOR;
apic_write(APIC_SPIV, value);
@@ -922,6 +989,16 @@ static void __cpuinit lapic_setup_esr(void)
{
unsigned long oldvalue, value, maxlvt;
if (lapic_is_integrated() && !esr_disable) {
+ if (esr_disable) {
+ /*
+ * Something untraceable is creating bad interrupts on
+ * secondary quads ... for the moment, just leave the
+ * ESR disabled - we can't do anything useful with the
+ * errors anyway - mbligh
+ */
+ printk(KERN_INFO "Leaving ESR disabled.\n");
+ return;
+ }
/* !82489DX */
maxlvt = lapic_get_maxlvt();
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
@@ -942,16 +1019,7 @@ static void __cpuinit lapic_setup_esr(void)
"vector: 0x%08lx after: 0x%08lx\n",
oldvalue, value);
} else {
- if (esr_disable)
- /*
- * Something untraceable is creating bad interrupts on
- * secondary quads ... for the moment, just leave the
- * ESR disabled - we can't do anything useful with the
- * errors anyway - mbligh
- */
- printk(KERN_INFO "Leaving ESR disabled.\n");
- else
- printk(KERN_INFO "No ESR for 82489DX.\n");
+ printk(KERN_INFO "No ESR for 82489DX.\n");
}
}
@@ -1089,13 +1157,17 @@ void __cpuinit setup_local_APIC(void)
void __cpuinit end_local_APIC_setup(void)
{
- unsigned long value;
-
lapic_setup_esr();
- /* Disable the local apic timer */
- value = apic_read(APIC_LVTT);
- value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
- apic_write(APIC_LVTT, value);
+
+#ifdef CONFIG_X86_32
+ {
+ unsigned int value;
+ /* Disable the local apic timer */
+ value = apic_read(APIC_LVTT);
+ value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+ apic_write(APIC_LVTT, value);
+ }
+#endif
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
@@ -1205,7 +1277,7 @@ void __init init_apic_mappings(void)
* default configuration (or the MP table is broken).
*/
if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+ boot_cpu_physical_apicid = read_apic_id();
}
@@ -1242,7 +1314,7 @@ int __init APIC_init_uniprocessor(void)
* might be zero if read from MP tables. Get it from LAPIC.
*/
#ifdef CONFIG_CRASH_DUMP
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+ boot_cpu_physical_apicid = read_apic_id();
#endif
physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
@@ -1321,59 +1393,12 @@ void smp_error_interrupt(struct pt_regs *regs)
irq_exit();
}
-#ifdef CONFIG_SMP
-void __init smp_intr_init(void)
-{
- /*
- * IRQ0 must be given a fixed assignment and initialized,
- * because it's used before the IO-APIC is set up.
- */
- set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
-
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPI for invalidation */
- alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
-
- /* IPI for generic function call */
- alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
- /* IPI for single call function */
- set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
- call_function_single_interrupt);
-}
-#endif
-
-/*
- * Initialize APIC interrupts
- */
-void __init apic_intr_init(void)
-{
-#ifdef CONFIG_SMP
- smp_intr_init();
-#endif
- /* self generated IPI for local APIC timer */
- alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
- /* IPI vectors for APIC spurious and error interrupts */
- alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-
- /* thermal monitor LVT interrupt */
-#ifdef CONFIG_X86_MCE_P4THERMAL
- alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-#endif
-}
-
/**
* connect_bsp_APIC - attach the APIC to the interrupt system
*/
void __init connect_bsp_APIC(void)
{
+#ifdef CONFIG_X86_32
if (pic_mode) {
/*
* Do not trust the local APIC being empty at bootup.
@@ -1388,6 +1413,7 @@ void __init connect_bsp_APIC(void)
outb(0x70, 0x22);
outb(0x01, 0x23);
}
+#endif
enable_apic_mode();
}
@@ -1400,6 +1426,9 @@ void __init connect_bsp_APIC(void)
*/
void disconnect_bsp_APIC(int virt_wire_setup)
{
+ unsigned int value;
+
+#ifdef CONFIG_X86_32
if (pic_mode) {
/*
* Put the board back into PIC mode (has an effect only on
@@ -1411,54 +1440,53 @@ void disconnect_bsp_APIC(int virt_wire_setup)
"entering PIC mode.\n");
outb(0x70, 0x22);
outb(0x00, 0x23);
- } else {
- /* Go back to Virtual Wire compatibility mode */
- unsigned long value;
+ return;
+ }
+#endif
- /* For the spurious interrupt use vector F, and enable it */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
- value |= 0xf;
- apic_write(APIC_SPIV, value);
+ /* Go back to Virtual Wire compatibility mode */
- if (!virt_wire_setup) {
- /*
- * For LVT0 make it edge triggered, active high,
- * external and enabled
- */
- value = apic_read(APIC_LVT0);
- value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
- APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
- value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
- apic_write(APIC_LVT0, value);
- } else {
- /* Disable LVT0 */
- apic_write(APIC_LVT0, APIC_LVT_MASKED);
- }
+ /* For the spurious interrupt use vector F, and enable it */
+ value = apic_read(APIC_SPIV);
+ value &= ~APIC_VECTOR_MASK;
+ value |= APIC_SPIV_APIC_ENABLED;
+ value |= 0xf;
+ apic_write(APIC_SPIV, value);
+ if (!virt_wire_setup) {
/*
- * For LVT1 make it edge triggered, active high, nmi and
- * enabled
+ * For LVT0 make it edge triggered, active high,
+ * external and enabled
*/
- value = apic_read(APIC_LVT1);
- value &= ~(
- APIC_MODE_MASK | APIC_SEND_PENDING |
+ value = apic_read(APIC_LVT0);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
- apic_write(APIC_LVT1, value);
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+ apic_write(APIC_LVT0, value);
+ } else {
+ /* Disable LVT0 */
+ apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
+
+ /*
+ * For LVT1 make it edge triggered, active high,
+ * nmi and enabled
+ */
+ value = apic_read(APIC_LVT1);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+ APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+ APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+ value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+ apic_write(APIC_LVT1, value);
}
void __cpuinit generic_processor_info(int apicid, int version)
{
int cpu;
cpumask_t tmp_map;
- physid_mask_t phys_cpu;
/*
* Validate version
@@ -1471,9 +1499,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
}
apic_version[apicid] = version;
- phys_cpu = apicid_to_cpu_present(apicid);
- physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
if (num_processors >= NR_CPUS) {
printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
" Processor ignored.\n", NR_CPUS);
@@ -1484,17 +1509,19 @@ void __cpuinit generic_processor_info(int apicid, int version)
cpus_complement(tmp_map, cpu_present_map);
cpu = first_cpu(tmp_map);
- if (apicid == boot_cpu_physical_apicid)
+ physid_set(apicid, phys_cpu_present_map);
+ if (apicid == boot_cpu_physical_apicid) {
/*
* x86_bios_cpu_apicid is required to have processors listed
* in same order as logical cpu numbers. Hence the first
* entry is BSP, and so on.
*/
cpu = 0;
-
+ }
if (apicid > max_physical_apicid)
max_physical_apicid = apicid;
+#ifdef CONFIG_X86_32
/*
* Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
* but we need to work other dependencies like SMP_SUSPEND etc
@@ -1514,7 +1541,9 @@ void __cpuinit generic_processor_info(int apicid, int version)
def_to_bigsmp = 1;
}
}
-#ifdef CONFIG_SMP
+#endif
+
+#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
/* are we being called early in kernel startup? */
if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
@@ -1527,6 +1556,7 @@ void __cpuinit generic_processor_info(int apicid, int version)
per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
}
#endif
+
cpu_set(cpu, cpu_possible_map);
cpu_set(cpu, cpu_present_map);
}
@@ -1537,6 +1567,11 @@ void __cpuinit generic_processor_info(int apicid, int version)
#ifdef CONFIG_PM
static struct {
+ /*
+ * 'active' is true if the local APIC was enabled by us and
+ * not the BIOS; this signifies that we are also responsible
+ * for disabling it before entering apm/acpi suspend
+ */
int active;
/* r/w apic fields */
unsigned int apic_id;
@@ -1577,7 +1612,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
#endif
@@ -1601,16 +1636,23 @@ static int lapic_resume(struct sys_device *dev)
local_irq_save(flags);
- /*
- * Make sure the APICBASE points to the right address
- *
- * FIXME! This will be wrong if we ever support suspend on
- * SMP! We'll need to do this as part of the CPU restore!
- */
- rdmsr(MSR_IA32_APICBASE, l, h);
- l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
- wrmsr(MSR_IA32_APICBASE, l, h);
+#ifdef CONFIG_X86_64
+ if (x2apic)
+ enable_x2apic();
+ else
+#endif
+ {
+ /*
+ * Make sure the APICBASE points to the right address
+ *
+ * FIXME! This will be wrong if we ever support suspend on
+ * SMP! We'll need to do this as part of the CPU restore!
+ */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ l &= ~MSR_IA32_APICBASE_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+ }
apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
apic_write(APIC_ID, apic_pm_state.apic_id);
@@ -1620,7 +1662,7 @@ static int lapic_resume(struct sys_device *dev)
apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#ifdef CONFIG_X86_MCE_P4THERMAL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
#endif
@@ -1634,7 +1676,9 @@ static int lapic_resume(struct sys_device *dev)
apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
+
local_irq_restore(flags);
+
return 0;
}
@@ -1690,20 +1734,20 @@ static int __init parse_lapic(char *arg)
}
early_param("lapic", parse_lapic);
-static int __init parse_nolapic(char *arg)
+static int __init setup_disableapic(char *arg)
{
disable_apic = 1;
setup_clear_cpu_cap(X86_FEATURE_APIC);
return 0;
}
-early_param("nolapic", parse_nolapic);
+early_param("disableapic", setup_disableapic);
-static int __init parse_disable_lapic_timer(char *arg)
+/* same as disableapic, for compatibility */
+static int __init setup_nolapic(char *arg)
{
- local_apic_timer_disabled = 1;
- return 0;
+ return setup_disableapic(arg);
}
-early_param("nolapic_timer", parse_disable_lapic_timer);
+early_param("nolapic", setup_nolapic);
static int __init parse_lapic_timer_c2_ok(char *arg)
{
@@ -1712,15 +1756,40 @@ static int __init parse_lapic_timer_c2_ok(char *arg)
}
early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
+static int __init parse_disable_apic_timer(char *arg)
+{
+ disable_apic_timer = 1;
+ return 0;
+}
+early_param("noapictimer", parse_disable_apic_timer);
+
+static int __init parse_nolapic_timer(char *arg)
+{
+ disable_apic_timer = 1;
+ return 0;
+}
+early_param("nolapic_timer", parse_nolapic_timer);
+
static int __init apic_set_verbosity(char *arg)
{
- if (!arg)
+ if (!arg) {
+#ifdef CONFIG_X86_64
+ skip_ioapic_setup = 0;
+ ioapic_force = 1;
+ return 0;
+#endif
return -EINVAL;
+ }
- if (strcmp(arg, "debug") == 0)
+ if (strcmp("debug", arg) == 0)
apic_verbosity = APIC_DEBUG;
- else if (strcmp(arg, "verbose") == 0)
+ else if (strcmp("verbose", arg) == 0)
apic_verbosity = APIC_VERBOSE;
+ else {
+ printk(KERN_WARNING "APIC Verbosity level %s not recognised"
+ " use apic=verbose or apic=debug\n", arg);
+ return -EINVAL;
+ }
return 0;
}