diff options
Diffstat (limited to 'arch/x86/kernel/apic_32.c')
-rw-r--r-- | arch/x86/kernel/apic_32.c | 396 |
1 files changed, 216 insertions, 180 deletions
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 44cae65e32e..a91c57cb666 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -60,10 +60,8 @@ unsigned long mp_lapic_addr; static int force_enable_local_apic; int disable_apic; -/* Local APIC timer verification ok */ -static int local_apic_timer_verify_ok; /* Disable local APIC timer from the kernel commandline or via dmi quirk */ -static int local_apic_timer_disabled; +static int disable_apic_timer __cpuinitdata; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); @@ -130,7 +128,11 @@ static inline int lapic_get_version(void) */ static inline int lapic_is_integrated(void) { +#ifdef CONFIG_X86_64 + return 1; +#else return APIC_INTEGRATED(lapic_get_version()); +#endif } /* @@ -205,11 +207,15 @@ EXPORT_SYMBOL_GPL(apic_ops); */ void __cpuinit enable_NMI_through_LVT0(void) { - unsigned int v = APIC_DM_NMI; + unsigned int v; - /* Level triggered for 82489DX */ + /* unmask and set to NMI */ + v = APIC_DM_NMI; + + /* Level triggered for 82489DX (32bit mode) */ if (!lapic_is_integrated()) v |= APIC_LVT_LEVEL_TRIGGER; + apic_write(APIC_LVT0, v); } @@ -226,9 +232,13 @@ int get_physical_broadcast(void) */ int lapic_get_maxlvt(void) { - unsigned int v = apic_read(APIC_LVR); + unsigned int v; - /* 82489DXs do not report # of LVT entries. */ + v = apic_read(APIC_LVR); + /* + * - we always have APIC integrated on 64bit mode + * - 82489DXs do not report # of LVT entries + */ return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } @@ -236,8 +246,12 @@ int lapic_get_maxlvt(void) * Local APIC timer */ -/* Clock divisor is set to 16 */ +/* Clock divisor */ +#ifdef CONFG_X86_64 +#define APIC_DIVISOR 1 +#else #define APIC_DIVISOR 16 +#endif /* * This function sets up the local APIC timer, with a timeout of @@ -245,6 +259,9 @@ int lapic_get_maxlvt(void) * this function twice on the boot CPU, once with a bogus timeout * value, second time for real. The other (noncalibrating) CPUs * call this function only once, with the real, calibrated value. + * + * We do reads before writes even if unnecessary, to get around the + * P5 APIC double write bug. */ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { @@ -266,14 +283,44 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) */ tmp_value = apic_read(APIC_TDCR); apic_write(APIC_TDCR, - (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | - APIC_TDR_DIV_16); + (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | + APIC_TDR_DIV_16); if (!oneshot) apic_write(APIC_TMICT, clocks / APIC_DIVISOR); } /* + * Setup extended LVT, AMD specific (K8, family 10h) + * + * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and + * MCE interrupts are supported. Thus MCE offset must be set to 0. + */ + +#define APIC_EILVT_LVTOFF_MCE 0 +#define APIC_EILVT_LVTOFF_IBS 1 + +static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) +{ + unsigned long reg = (lvt_off << 4) + APIC_EILVT0; + unsigned int v = (mask << 16) | (msg_type << 8) | vector; + + apic_write(reg, v); +} + +u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_MCE; +} + +u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_IBS; +} + +/* * Program the next event, relative to now */ static int lapic_next_event(unsigned long delta, @@ -292,8 +339,8 @@ static void lapic_timer_setup(enum clock_event_mode mode, unsigned long flags; unsigned int v; - /* Lapic used for broadcast ? */ - if (!local_apic_timer_verify_ok) + /* Lapic used as dummy for broadcast ? */ + if (evt->features & CLOCK_EVT_FEAT_DUMMY) return; local_irq_save(flags); @@ -506,7 +553,7 @@ static int __init calibrate_APIC_clock(void) return -1; } - local_apic_timer_verify_ok = 1; + levt->features &= ~CLOCK_EVT_FEAT_DUMMY; /* We trust the pm timer based calibration */ if (!pm_referenced) { @@ -540,11 +587,11 @@ static int __init calibrate_APIC_clock(void) if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2) apic_printk(APIC_VERBOSE, "... jiffies result ok\n"); else - local_apic_timer_verify_ok = 0; + levt->features |= CLOCK_EVT_FEAT_DUMMY; } else local_irq_enable(); - if (!local_apic_timer_verify_ok) { + if (levt->features & CLOCK_EVT_FEAT_DUMMY) { printk(KERN_WARNING "APIC timer disabled due to verification failure.\n"); return -1; @@ -566,7 +613,8 @@ void __init setup_boot_APIC_clock(void) * timer as a dummy clock event source on SMP systems, so the * broadcast mechanism is used. On UP systems simply ignore it. */ - if (local_apic_timer_disabled) { + if (disable_apic_timer) { + printk(KERN_INFO "Disabling APIC timer\n"); /* No broadcast on UP ! */ if (num_possible_cpus() > 1) { lapic_clockevent.mult = 1; @@ -635,7 +683,11 @@ static void local_apic_timer_interrupt(void) /* * the NMI deadlock-detector uses this. */ +#ifdef CONFIG_X86_64 + add_pda(apic_timer_irqs, 1); +#else per_cpu(irq_stat, cpu).apic_timer_irqs++; +#endif evt->event_handler(evt); } @@ -675,35 +727,6 @@ int setup_profiling_timer(unsigned int multiplier) } /* - * Setup extended LVT, AMD specific (K8, family 10h) - * - * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and - * MCE interrupts are supported. Thus MCE offset must be set to 0. - */ - -#define APIC_EILVT_LVTOFF_MCE 0 -#define APIC_EILVT_LVTOFF_IBS 1 - -static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) -{ - unsigned long reg = (lvt_off << 4) + APIC_EILVT0; - unsigned int v = (mask << 16) | (msg_type << 8) | vector; - apic_write(reg, v); -} - -u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_MCE; -} - -u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_IBS; -} - -/* * Local APIC start and shutdown */ @@ -748,7 +771,7 @@ void clear_local_APIC(void) } /* lets not touch this if we didn't frob it */ -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL) if (maxlvt >= 5) { v = apic_read(APIC_LVTTHMR); apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED); @@ -765,10 +788,6 @@ void clear_local_APIC(void) if (maxlvt >= 4) apic_write(APIC_LVTPC, APIC_LVT_MASKED); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write(APIC_LVTTHMR, APIC_LVT_MASKED); -#endif /* Integrated APIC (!82489DX) ? */ if (lapic_is_integrated()) { if (maxlvt > 3) @@ -783,7 +802,7 @@ void clear_local_APIC(void) */ void disable_local_APIC(void) { - unsigned long value; + unsigned int value; clear_local_APIC(); @@ -795,6 +814,7 @@ void disable_local_APIC(void) value &= ~APIC_SPIV_APIC_ENABLED; apic_write(APIC_SPIV, value); +#ifdef CONFIG_X86_32 /* * When LAPIC was disabled by the BIOS and enabled by the kernel, * restore the disabled state. @@ -806,6 +826,7 @@ void disable_local_APIC(void) l &= ~MSR_IA32_APICBASE_ENABLE; wrmsr(MSR_IA32_APICBASE, l, h); } +#endif } /* @@ -822,11 +843,15 @@ void lapic_shutdown(void) return; local_irq_save(flags); - clear_local_APIC(); - if (enabled_via_apicbase) +#ifdef CONFIG_X86_32 + if (!enabled_via_apicbase) + clear_local_APIC(); + else +#endif disable_local_APIC(); + local_irq_restore(flags); } @@ -871,6 +896,12 @@ int __init verify_local_APIC(void) */ reg0 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); + apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); + reg1 = apic_read(APIC_ID); + apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); + apic_write(APIC_ID, reg0); + if (reg1 != (reg0 ^ APIC_ID_MASK)) + return 0; /* * The next two are just to see if we have sane values. @@ -896,14 +927,15 @@ void __init sync_Arb_IDs(void) */ if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD) return; + /* * Wait for idle. */ apic_wait_icr_idle(); apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write(APIC_ICR, - APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT); + apic_write(APIC_ICR, APIC_DEST_ALLINC | + APIC_INT_LEVELTRIG | APIC_DM_INIT); } /* @@ -911,7 +943,7 @@ void __init sync_Arb_IDs(void) */ void __init init_bsp_APIC(void) { - unsigned long value; + unsigned int value; /* * Don't do the setup now if we have a SMP BIOS as the @@ -932,11 +964,13 @@ void __init init_bsp_APIC(void) value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; +#ifdef CONFIG_X86_32 /* This bit is reserved on P4/Xeon and should be cleared */ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15)) value &= ~APIC_SPIV_FOCUS_DISABLED; else +#endif value |= APIC_SPIV_FOCUS_DISABLED; value |= SPURIOUS_APIC_VECTOR; apic_write(APIC_SPIV, value); @@ -955,6 +989,16 @@ static void __cpuinit lapic_setup_esr(void) { unsigned long oldvalue, value, maxlvt; if (lapic_is_integrated() && !esr_disable) { + if (esr_disable) { + /* + * Something untraceable is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + return; + } /* !82489DX */ maxlvt = lapic_get_maxlvt(); if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ @@ -975,16 +1019,7 @@ static void __cpuinit lapic_setup_esr(void) "vector: 0x%08lx after: 0x%08lx\n", oldvalue, value); } else { - if (esr_disable) - /* - * Something untraceable is creating bad interrupts on - * secondary quads ... for the moment, just leave the - * ESR disabled - we can't do anything useful with the - * errors anyway - mbligh - */ - printk(KERN_INFO "Leaving ESR disabled.\n"); - else - printk(KERN_INFO "No ESR for 82489DX.\n"); + printk(KERN_INFO "No ESR for 82489DX.\n"); } } @@ -1122,13 +1157,17 @@ void __cpuinit setup_local_APIC(void) void __cpuinit end_local_APIC_setup(void) { - unsigned long value; - lapic_setup_esr(); - /* Disable the local apic timer */ - value = apic_read(APIC_LVTT); - value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write(APIC_LVTT, value); + +#ifdef CONFIG_X86_32 + { + unsigned int value; + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, value); + } +#endif setup_apic_nmi_watchdog(NULL); apic_pm_activate(); @@ -1354,59 +1393,12 @@ void smp_error_interrupt(struct pt_regs *regs) irq_exit(); } -#ifdef CONFIG_SMP -void __init smp_intr_init(void) -{ - /* - * IRQ0 must be given a fixed assignment and initialized, - * because it's used before the IO-APIC is set up. - */ - set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]); - - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPI for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* IPI for single call function */ - set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); -} -#endif - -/* - * Initialize APIC interrupts - */ -void __init apic_intr_init(void) -{ -#ifdef CONFIG_SMP - smp_intr_init(); -#endif - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - /* thermal monitor LVT interrupt */ -#ifdef CONFIG_X86_MCE_P4THERMAL - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif -} - /** * connect_bsp_APIC - attach the APIC to the interrupt system */ void __init connect_bsp_APIC(void) { +#ifdef CONFIG_X86_32 if (pic_mode) { /* * Do not trust the local APIC being empty at bootup. @@ -1421,6 +1413,7 @@ void __init connect_bsp_APIC(void) outb(0x70, 0x22); outb(0x01, 0x23); } +#endif enable_apic_mode(); } @@ -1433,6 +1426,9 @@ void __init connect_bsp_APIC(void) */ void disconnect_bsp_APIC(int virt_wire_setup) { + unsigned int value; + +#ifdef CONFIG_X86_32 if (pic_mode) { /* * Put the board back into PIC mode (has an effect only on @@ -1444,54 +1440,53 @@ void disconnect_bsp_APIC(int virt_wire_setup) "entering PIC mode.\n"); outb(0x70, 0x22); outb(0x00, 0x23); - } else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; + return; + } +#endif - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write(APIC_SPIV, value); + /* Go back to Virtual Wire compatibility mode */ - if (!virt_wire_setup) { - /* - * For LVT0 make it edge triggered, active high, - * external and enabled - */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write(APIC_LVT0, value); - } else { - /* Disable LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED); - } + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write(APIC_SPIV, value); + if (!virt_wire_setup) { /* - * For LVT1 make it edge triggered, active high, nmi and - * enabled + * For LVT0 make it edge triggered, active high, + * external and enabled */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write(APIC_LVT1, value); + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write(APIC_LVT0, APIC_LVT_MASKED); } + + /* + * For LVT1 make it edge triggered, active high, + * nmi and enabled + */ + value = apic_read(APIC_LVT1); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write(APIC_LVT1, value); } void __cpuinit generic_processor_info(int apicid, int version) { int cpu; cpumask_t tmp_map; - physid_mask_t phys_cpu; /* * Validate version @@ -1504,9 +1499,6 @@ void __cpuinit generic_processor_info(int apicid, int version) } apic_version[apicid] = version; - phys_cpu = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); - if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." " Processor ignored.\n", NR_CPUS); @@ -1517,17 +1509,19 @@ void __cpuinit generic_processor_info(int apicid, int version) cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); - if (apicid == boot_cpu_physical_apicid) + physid_set(apicid, phys_cpu_present_map); + if (apicid == boot_cpu_physical_apicid) { /* * x86_bios_cpu_apicid is required to have processors listed * in same order as logical cpu numbers. Hence the first * entry is BSP, and so on. */ cpu = 0; - + } if (apicid > max_physical_apicid) max_physical_apicid = apicid; +#ifdef CONFIG_X86_32 /* * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y * but we need to work other dependencies like SMP_SUSPEND etc @@ -1547,7 +1541,9 @@ void __cpuinit generic_processor_info(int apicid, int version) def_to_bigsmp = 1; } } -#ifdef CONFIG_SMP +#endif + +#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64) /* are we being called early in kernel startup? */ if (early_per_cpu_ptr(x86_cpu_to_apicid)) { u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); @@ -1560,6 +1556,7 @@ void __cpuinit generic_processor_info(int apicid, int version) per_cpu(x86_bios_cpu_apicid, cpu) = apicid; } #endif + cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); } @@ -1570,6 +1567,11 @@ void __cpuinit generic_processor_info(int apicid, int version) #ifdef CONFIG_PM static struct { + /* + * 'active' is true if the local APIC was enabled by us and + * not the BIOS; this signifies that we are also responsible + * for disabling it before entering apm/acpi suspend + */ int active; /* r/w apic fields */ unsigned int apic_id; @@ -1610,7 +1612,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif @@ -1634,16 +1636,23 @@ static int lapic_resume(struct sys_device *dev) local_irq_save(flags); - /* - * Make sure the APICBASE points to the right address - * - * FIXME! This will be wrong if we ever support suspend on - * SMP! We'll need to do this as part of the CPU restore! - */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); +#ifdef CONFIG_X86_64 + if (x2apic) + enable_x2apic(); + else +#endif + { + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); apic_write(APIC_ID, apic_pm_state.apic_id); @@ -1653,7 +1662,7 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_SPIV, apic_pm_state.apic_spiv); apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); #endif @@ -1667,7 +1676,9 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); apic_write(APIC_ESR, 0); apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; } @@ -1723,20 +1734,20 @@ static int __init parse_lapic(char *arg) } early_param("lapic", parse_lapic); -static int __init parse_nolapic(char *arg) +static int __init setup_disableapic(char *arg) { disable_apic = 1; setup_clear_cpu_cap(X86_FEATURE_APIC); return 0; } -early_param("nolapic", parse_nolapic); +early_param("disableapic", setup_disableapic); -static int __init parse_disable_lapic_timer(char *arg) +/* same as disableapic, for compatibility */ +static int __init setup_nolapic(char *arg) { - local_apic_timer_disabled = 1; - return 0; + return setup_disableapic(arg); } -early_param("nolapic_timer", parse_disable_lapic_timer); +early_param("nolapic", setup_nolapic); static int __init parse_lapic_timer_c2_ok(char *arg) { @@ -1745,15 +1756,40 @@ static int __init parse_lapic_timer_c2_ok(char *arg) } early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); +static int __init parse_disable_apic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("noapictimer", parse_disable_apic_timer); + +static int __init parse_nolapic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("nolapic_timer", parse_nolapic_timer); + static int __init apic_set_verbosity(char *arg) { - if (!arg) + if (!arg) { +#ifdef CONFIG_X86_64 + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; +#endif return -EINVAL; + } - if (strcmp(arg, "debug") == 0) + if (strcmp("debug", arg) == 0) apic_verbosity = APIC_DEBUG; - else if (strcmp(arg, "verbose") == 0) + else if (strcmp("verbose", arg) == 0) apic_verbosity = APIC_VERBOSE; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", arg); + return -EINVAL; + } return 0; } |