summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/apic_64.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/apic_64.c')
-rw-r--r--arch/x86/kernel/apic_64.c1848
1 files changed, 0 insertions, 1848 deletions
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
deleted file mode 100644
index 94ddb69ae15..00000000000
--- a/arch/x86/kernel/apic_64.c
+++ /dev/null
@@ -1,1848 +0,0 @@
-/*
- * Local APIC handling, local APIC timers
- *
- * (c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- * Fixes
- * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
- * thanks to Eric Gilmore
- * and Rolf G. Tews
- * for testing these extensively.
- * Maciej W. Rozycki : Various updates and fixes.
- * Mikael Pettersson : Power Management for UP-APIC.
- * Pavel Machek and
- * Mikael Pettersson : PM converted to driver model.
- */
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/clockchips.h>
-#include <linux/acpi_pmtmr.h>
-#include <linux/module.h>
-#include <linux/dmar.h>
-
-#include <asm/atomic.h>
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/hpet.h>
-#include <asm/pgalloc.h>
-#include <asm/nmi.h>
-#include <asm/idle.h>
-#include <asm/proto.h>
-#include <asm/timex.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-
-#include <mach_ipi.h>
-#include <mach_apic.h>
-
-/* Disable local APIC timer from the kernel commandline or via dmi quirk */
-static int disable_apic_timer __cpuinitdata;
-static int apic_calibrate_pmtmr __initdata;
-int disable_apic;
-int disable_x2apic;
-int x2apic;
-
-/* x2apic enabled before OS handover */
-int x2apic_preenabled;
-
-/* Local APIC timer works in C2 */
-int local_apic_timer_c2_ok;
-EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
-
-/*
- * Debug level, exported for io_apic.c
- */
-unsigned int apic_verbosity;
-
-/* Have we found an MP table */
-int smp_found_config;
-
-static struct resource lapic_resource = {
- .name = "Local APIC",
- .flags = IORESOURCE_MEM | IORESOURCE_BUSY,
-};
-
-static unsigned int calibration_result;
-
-static int lapic_next_event(unsigned long delta,
- struct clock_event_device *evt);
-static void lapic_timer_setup(enum clock_event_mode mode,
- struct clock_event_device *evt);
-static void lapic_timer_broadcast(cpumask_t mask);
-static void apic_pm_activate(void);
-
-/*
- * The local apic timer can be used for any function which is CPU local.
- */
-static struct clock_event_device lapic_clockevent = {
- .name = "lapic",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
- | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
- .shift = 32,
- .set_mode = lapic_timer_setup,
- .set_next_event = lapic_next_event,
- .broadcast = lapic_timer_broadcast,
- .rating = 100,
- .irq = -1,
-};
-static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
-
-static unsigned long apic_phys;
-
-unsigned long mp_lapic_addr;
-
-/*
- * Get the LAPIC version
- */
-static inline int lapic_get_version(void)
-{
- return GET_APIC_VERSION(apic_read(APIC_LVR));
-}
-
-/*
- * Check, if the APIC is integrated or a separate chip
- */
-static inline int lapic_is_integrated(void)
-{
-#ifdef CONFIG_X86_64
- return 1;
-#else
- return APIC_INTEGRATED(lapic_get_version());
-#endif
-}
-
-/*
- * Check, whether this is a modern or a first generation APIC
- */
-static int modern_apic(void)
-{
- /* AMD systems use old APIC versions, so check the CPU */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 >= 0xf)
- return 1;
- return lapic_get_version() >= 0x14;
-}
-
-/*
- * Paravirt kernels also might be using these below ops. So we still
- * use generic apic_read()/apic_write(), which might be pointing to different
- * ops in PARAVIRT case.
- */
-void xapic_wait_icr_idle(void)
-{
- while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
- cpu_relax();
-}
-
-u32 safe_xapic_wait_icr_idle(void)
-{
- u32 send_status;
- int timeout;
-
- timeout = 0;
- do {
- send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
- if (!send_status)
- break;
- udelay(100);
- } while (timeout++ < 1000);
-
- return send_status;
-}
-
-void xapic_icr_write(u32 low, u32 id)
-{
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
- apic_write(APIC_ICR, low);
-}
-
-u64 xapic_icr_read(void)
-{
- u32 icr1, icr2;
-
- icr2 = apic_read(APIC_ICR2);
- icr1 = apic_read(APIC_ICR);
-
- return icr1 | ((u64)icr2 << 32);
-}
-
-static struct apic_ops xapic_ops = {
- .read = native_apic_mem_read,
- .write = native_apic_mem_write,
- .icr_read = xapic_icr_read,
- .icr_write = xapic_icr_write,
- .wait_icr_idle = xapic_wait_icr_idle,
- .safe_wait_icr_idle = safe_xapic_wait_icr_idle,
-};
-
-struct apic_ops __read_mostly *apic_ops = &xapic_ops;
-EXPORT_SYMBOL_GPL(apic_ops);
-
-static void x2apic_wait_icr_idle(void)
-{
- /* no need to wait for icr idle in x2apic */
- return;
-}
-
-static u32 safe_x2apic_wait_icr_idle(void)
-{
- /* no need to wait for icr idle in x2apic */
- return 0;
-}
-
-void x2apic_icr_write(u32 low, u32 id)
-{
- wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
-}
-
-u64 x2apic_icr_read(void)
-{
- unsigned long val;
-
- rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
- return val;
-}
-
-static struct apic_ops x2apic_ops = {
- .read = native_apic_msr_read,
- .write = native_apic_msr_write,
- .icr_read = x2apic_icr_read,
- .icr_write = x2apic_icr_write,
- .wait_icr_idle = x2apic_wait_icr_idle,
- .safe_wait_icr_idle = safe_x2apic_wait_icr_idle,
-};
-
-/**
- * enable_NMI_through_LVT0 - enable NMI through local vector table 0
- */
-void __cpuinit enable_NMI_through_LVT0(void)
-{
- unsigned int v;
-
- /* unmask and set to NMI */
- v = APIC_DM_NMI;
-
- /* Level triggered for 82489DX (32bit mode) */
- if (!lapic_is_integrated())
- v |= APIC_LVT_LEVEL_TRIGGER;
-
- apic_write(APIC_LVT0, v);
-}
-
-/**
- * lapic_get_maxlvt - get the maximum number of local vector table entries
- */
-int lapic_get_maxlvt(void)
-{
- unsigned int v;
-
- v = apic_read(APIC_LVR);
- /*
- * - we always have APIC integrated on 64bit mode
- * - 82489DXs do not report # of LVT entries
- */
- return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
-}
-
-/*
- * Local APIC timer
- */
-
-/* Clock divisor */
-#ifdef CONFG_X86_64
-#define APIC_DIVISOR 1
-#else
-#define APIC_DIVISOR 16
-#endif
-
-/*
- * This function sets up the local APIC timer, with a timeout of
- * 'clocks' APIC bus clock. During calibration we actually call
- * this function twice on the boot CPU, once with a bogus timeout
- * value, second time for real. The other (noncalibrating) CPUs
- * call this function only once, with the real, calibrated value.
- *
- * We do reads before writes even if unnecessary, to get around the
- * P5 APIC double write bug.
- */
-static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
-{
- unsigned int lvtt_value, tmp_value;
-
- lvtt_value = LOCAL_TIMER_VECTOR;
- if (!oneshot)
- lvtt_value |= APIC_LVT_TIMER_PERIODIC;
- if (!lapic_is_integrated())
- lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
-
- if (!irqen)
- lvtt_value |= APIC_LVT_MASKED;
-
- apic_write(APIC_LVTT, lvtt_value);
-
- /*
- * Divide PICLK by 16
- */
- tmp_value = apic_read(APIC_TDCR);
- apic_write(APIC_TDCR,
- (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
- APIC_TDR_DIV_16);
-
- if (!oneshot)
- apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
-}
-
-/*
- * Setup extended LVT, AMD specific (K8, family 10h)
- *
- * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
- * MCE interrupts are supported. Thus MCE offset must be set to 0.
- *
- * If mask=1, the LVT entry does not generate interrupts while mask=0
- * enables the vector. See also the BKDGs.
- */
-
-#define APIC_EILVT_LVTOFF_MCE 0
-#define APIC_EILVT_LVTOFF_IBS 1
-
-static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
-{
- unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
- unsigned int v = (mask << 16) | (msg_type << 8) | vector;
-
- apic_write(reg, v);
-}
-
-u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
-{
- setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
- return APIC_EILVT_LVTOFF_MCE;
-}
-
-u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
-{
- setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
- return APIC_EILVT_LVTOFF_IBS;
-}
-EXPORT_SYMBOL_GPL(setup_APIC_eilvt_ibs);
-
-/*
- * Program the next event, relative to now
- */
-static int lapic_next_event(unsigned long delta,
- struct clock_event_device *evt)
-{
- apic_write(APIC_TMICT, delta);
- return 0;
-}
-
-/*
- * Setup the lapic timer in periodic or oneshot mode
- */
-static void lapic_timer_setup(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned long flags;
- unsigned int v;
-
- /* Lapic used as dummy for broadcast ? */
- if (evt->features & CLOCK_EVT_FEAT_DUMMY)
- return;
-
- local_irq_save(flags);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- case CLOCK_EVT_MODE_ONESHOT:
- __setup_APIC_LVTT(calibration_result,
- mode != CLOCK_EVT_MODE_PERIODIC, 1);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- v = apic_read(APIC_LVTT);
- v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
- apic_write(APIC_LVTT, v);
- break;
- case CLOCK_EVT_MODE_RESUME:
- /* Nothing to do here */
- break;
- }
-
- local_irq_restore(flags);
-}
-
-/*
- * Local APIC timer broadcast function
- */
-static void lapic_timer_broadcast(cpumask_t mask)
-{
-#ifdef CONFIG_SMP
- send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
-#endif
-}
-
-/*
- * Setup the local APIC timer for this CPU. Copy the initilized values
- * of the boot CPU and register the clock event in the framework.
- */
-static void setup_APIC_timer(void)
-{
- struct clock_event_device *levt = &__get_cpu_var(lapic_events);
-
- memcpy(levt, &lapic_clockevent, sizeof(*levt));
- levt->cpumask = cpumask_of_cpu(smp_processor_id());
-
- clockevents_register_device(levt);
-}
-
-/*
- * In this function we calibrate APIC bus clocks to the external
- * timer. Unfortunately we cannot use jiffies and the timer irq
- * to calibrate, since some later bootup code depends on getting
- * the first irq? Ugh.
- *
- * We want to do the calibration only once since we
- * want to have local timer irqs syncron. CPUs connected
- * by the same APIC bus have the very same bus frequency.
- * And we want to have irqs off anyways, no accidental
- * APIC irq that way.
- */
-
-#define TICK_COUNT 100000000
-
-static int __init calibrate_APIC_clock(void)
-{
- unsigned apic, apic_start;
- unsigned long tsc, tsc_start;
- int result;
-
- local_irq_disable();
-
- /*
- * Put whatever arbitrary (but long enough) timeout
- * value into the APIC clock, we just want to get the
- * counter running for calibration.
- *
- * No interrupt enable !
- */
- __setup_APIC_LVTT(250000000, 0, 0);
-
- apic_start = apic_read(APIC_TMCCT);
-#ifdef CONFIG_X86_PM_TIMER
- if (apic_calibrate_pmtmr && pmtmr_ioport) {
- pmtimer_wait(5000); /* 5ms wait */
- apic = apic_read(APIC_TMCCT);
- result = (apic_start - apic) * 1000L / 5;
- } else
-#endif
- {
- rdtscll(tsc_start);
-
- do {
- apic = apic_read(APIC_TMCCT);
- rdtscll(tsc);
- } while ((tsc - tsc_start) < TICK_COUNT &&
- (apic_start - apic) < TICK_COUNT);
-
- result = (apic_start - apic) * 1000L * tsc_khz /
- (tsc - tsc_start);
- }
-
- local_irq_enable();
-
- printk(KERN_DEBUG "APIC timer calibration result %d\n", result);
-
- printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n",
- result / 1000 / 1000, result / 1000 % 1000);
-
- /* Calculate the scaled math multiplication factor */
- lapic_clockevent.mult = div_sc(result, NSEC_PER_SEC,
- lapic_clockevent.shift);
- lapic_clockevent.max_delta_ns =
- clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
- lapic_clockevent.min_delta_ns =
- clockevent_delta2ns(0xF, &lapic_clockevent);
-
- calibration_result = (result * APIC_DIVISOR) / HZ;
-
- /*
- * Do a sanity check on the APIC calibration result
- */
- if (calibration_result < (1000000 / HZ)) {
- printk(KERN_WARNING
- "APIC frequency too slow, disabling apic timer\n");
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Setup the boot APIC
- *
- * Calibrate and verify the result.
- */
-void __init setup_boot_APIC_clock(void)
-{
- /*
- * The local apic timer can be disabled via the kernel
- * commandline or from the CPU detection code. Register the lapic
- * timer as a dummy clock event source on SMP systems, so the
- * broadcast mechanism is used. On UP systems simply ignore it.
- */
- if (disable_apic_timer) {
- printk(KERN_INFO "Disabling APIC timer\n");
- /* No broadcast on UP ! */
- if (num_possible_cpus() > 1) {
- lapic_clockevent.mult = 1;
- setup_APIC_timer();
- }
- return;
- }
-
- apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
- "calibrating APIC timer ...\n");
-
- if (calibrate_APIC_clock()) {
- /* No broadcast on UP ! */
- if (num_possible_cpus() > 1)
- setup_APIC_timer();
- return;
- }
-
- /*
- * If nmi_watchdog is set to IO_APIC, we need the
- * PIT/HPET going. Otherwise register lapic as a dummy
- * device.
- */
- if (nmi_watchdog != NMI_IO_APIC)
- lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
- else
- printk(KERN_WARNING "APIC timer registered as dummy,"
- " due to nmi_watchdog=%d!\n", nmi_watchdog);
-
- /* Setup the lapic or request the broadcast */
- setup_APIC_timer();
-}
-
-void __cpuinit setup_secondary_APIC_clock(void)
-{
- setup_APIC_timer();
-}
-
-/*
- * The guts of the apic timer interrupt
- */
-static void local_apic_timer_interrupt(void)
-{
- int cpu = smp_processor_id();
- struct clock_event_device *evt = &per_cpu(lapic_events, cpu);
-
- /*
- * Normally we should not be here till LAPIC has been initialized but
- * in some cases like kdump, its possible that there is a pending LAPIC
- * timer interrupt from previous kernel's context and is delivered in
- * new kernel the moment interrupts are enabled.
- *
- * Interrupts are enabled early and LAPIC is setup much later, hence
- * its possible that when we get here evt->event_handler is NULL.
- * Check for event_handler being NULL and discard the interrupt as
- * spurious.
- */
- if (!evt->event_handler) {
- printk(KERN_WARNING
- "Spurious LAPIC timer interrupt on cpu %d\n", cpu);
- /* Switch it off */
- lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt);
- return;
- }
-
- /*
- * the NMI deadlock-detector uses this.
- */
-#ifdef CONFIG_X86_64
- add_pda(apic_timer_irqs, 1);
-#else
- per_cpu(irq_stat, cpu).apic_timer_irqs++;
-#endif
-
- evt->event_handler(evt);
-}
-
-/*
- * Local APIC timer interrupt. This is the most natural way for doing
- * local interrupts, but local timer interrupts can be emulated by
- * broadcast interrupts too. [in case the hw doesn't support APIC timers]
- *
- * [ if a single-CPU system runs an SMP kernel then we call the local
- * interrupt as well. Thus we cannot inline the local irq ... ]
- */
-void smp_apic_timer_interrupt(struct pt_regs *regs)
-{
- struct pt_regs *old_regs = set_irq_regs(regs);
-
- /*
- * NOTE! We'd better ACK the irq immediately,
- * because timer handling can be slow.
- */
- ack_APIC_irq();
- /*
- * update_process_times() expects us to have done irq_enter().
- * Besides, if we don't timer interrupts ignore the global
- * interrupt lock, which is the WrongThing (tm) to do.
- */
- exit_idle();
- irq_enter();
- local_apic_timer_interrupt();
- irq_exit();
-
- set_irq_regs(old_regs);
-}
-
-int setup_profiling_timer(unsigned int multiplier)
-{
- return -EINVAL;
-}
-
-
-/*
- * Local APIC start and shutdown
- */
-
-/**
- * clear_local_APIC - shutdown the local APIC
- *
- * This is called, when a CPU is disabled and before rebooting, so the state of
- * the local APIC has no dangling leftovers. Also used to cleanout any BIOS
- * leftovers during boot.
- */
-void clear_local_APIC(void)
-{
- int maxlvt;
- u32 v;
-
- /* APIC hasn't been mapped yet */
- if (!apic_phys)
- return;
-
- maxlvt = lapic_get_maxlvt();
- /*
- * Masking an LVT entry can trigger a local APIC error
- * if the vector is zero. Mask LVTERR first to prevent this.
- */
- if (maxlvt >= 3) {
- v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
- apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
- }
- /*
- * Careful: we have to set masks only first to deassert
- * any level-triggered sources.
- */
- v = apic_read(APIC_LVTT);
- apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
- v = apic_read(APIC_LVT0);
- apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
- v = apic_read(APIC_LVT1);
- apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
- if (maxlvt >= 4) {
- v = apic_read(APIC_LVTPC);
- apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
- }
-
- /* lets not touch this if we didn't frob it */
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
- if (maxlvt >= 5) {
- v = apic_read(APIC_LVTTHMR);
- apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
- }
-#endif
- /*
- * Clean APIC state for other OSs:
- */
- apic_write(APIC_LVTT, APIC_LVT_MASKED);
- apic_write(APIC_LVT0, APIC_LVT_MASKED);
- apic_write(APIC_LVT1, APIC_LVT_MASKED);
- if (maxlvt >= 3)
- apic_write(APIC_LVTERR, APIC_LVT_MASKED);
- if (maxlvt >= 4)
- apic_write(APIC_LVTPC, APIC_LVT_MASKED);
-
- /* Integrated APIC (!82489DX) ? */
- if (lapic_is_integrated()) {
- if (maxlvt > 3)
- /* Clear ESR due to Pentium errata 3AP and 11AP */
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
- }
-}
-
-/**
- * disable_local_APIC - clear and disable the local APIC
- */
-void disable_local_APIC(void)
-{
- unsigned int value;
-
- clear_local_APIC();
-
- /*
- * Disable APIC (implies clearing of registers
- * for 82489DX!).
- */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_SPIV_APIC_ENABLED;
- apic_write(APIC_SPIV, value);
-
-#ifdef CONFIG_X86_32
- /*
- * When LAPIC was disabled by the BIOS and enabled by the kernel,
- * restore the disabled state.
- */
- if (enabled_via_apicbase) {
- unsigned int l, h;
-
- rdmsr(MSR_IA32_APICBASE, l, h);
- l &= ~MSR_IA32_APICBASE_ENABLE;
- wrmsr(MSR_IA32_APICBASE, l, h);
- }
-#endif
-}
-
-/*
- * If Linux enabled the LAPIC against the BIOS default disable it down before
- * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and
- * not power-off. Additionally clear all LVT entries before disable_local_APIC
- * for the case where Linux didn't enable the LAPIC.
- */
-void lapic_shutdown(void)
-{
- unsigned long flags;
-
- if (!cpu_has_apic)
- return;
-
- local_irq_save(flags);
-
-#ifdef CONFIG_X86_32
- if (!enabled_via_apicbase)
- clear_local_APIC();
- else
-#endif
- disable_local_APIC();
-
-
- local_irq_restore(flags);
-}
-
-/*
- * This is to verify that we're looking at a real local APIC.
- * Check these against your board if the CPUs aren't getting
- * started for no apparent reason.
- */
-int __init verify_local_APIC(void)
-{
- unsigned int reg0, reg1;
-
- /*
- * The version register is read-only in a real APIC.
- */
- reg0 = apic_read(APIC_LVR);
- apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
- apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
- reg1 = apic_read(APIC_LVR);
- apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
-
- /*
- * The two version reads above should print the same
- * numbers. If the second one is different, then we
- * poke at a non-APIC.
- */
- if (reg1 != reg0)
- return 0;
-
- /*
- * Check if the version looks reasonably.
- */
- reg1 = GET_APIC_VERSION(reg0);
- if (reg1 == 0x00 || reg1 == 0xff)
- return 0;
- reg1 = lapic_get_maxlvt();
- if (reg1 < 0x02 || reg1 == 0xff)
- return 0;
-
- /*
- * The ID register is read/write in a real APIC.
- */
- reg0 = apic_read(APIC_ID);
- apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
- apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
- reg1 = apic_read(APIC_ID);
- apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
- apic_write(APIC_ID, reg0);
- if (reg1 != (reg0 ^ APIC_ID_MASK))
- return 0;
-
- /*
- * The next two are just to see if we have sane values.
- * They're only really relevant if we're in Virtual Wire
- * compatibility mode, but most boxes are anymore.
- */
- reg0 = apic_read(APIC_LVT0);
- apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
- reg1 = apic_read(APIC_LVT1);
- apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
-
- return 1;
-}
-
-/**
- * sync_Arb_IDs - synchronize APIC bus arbitration IDs
- */
-void __init sync_Arb_IDs(void)
-{
- /*
- * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
- * needed on AMD.
- */
- if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
- return;
-
- /*
- * Wait for idle.
- */
- apic_wait_icr_idle();
-
- apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
- apic_write(APIC_ICR, APIC_DEST_ALLINC |
- APIC_INT_LEVELTRIG | APIC_DM_INIT);
-}
-
-/*
- * An initial setup of the virtual wire mode.
- */
-void __init init_bsp_APIC(void)
-{
- unsigned int value;
-
- /*
- * Don't do the setup now if we have a SMP BIOS as the
- * through-I/O-APIC virtual wire mode might be active.
- */
- if (smp_found_config || !cpu_has_apic)
- return;
-
- /*
- * Do not trust the local APIC being empty at bootup.
- */
- clear_local_APIC();
-
- /*
- * Enable APIC.
- */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
-
-#ifdef CONFIG_X86_32
- /* This bit is reserved on P4/Xeon and should be cleared */
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
- (boot_cpu_data.x86 == 15))
- value &= ~APIC_SPIV_FOCUS_DISABLED;
- else
-#endif
- value |= APIC_SPIV_FOCUS_DISABLED;
- value |= SPURIOUS_APIC_VECTOR;
- apic_write(APIC_SPIV, value);
-
- /*
- * Set up the virtual wire mode.
- */
- apic_write(APIC_LVT0, APIC_DM_EXTINT);
- value = APIC_DM_NMI;
- if (!lapic_is_integrated()) /* 82489DX */
- value |= APIC_LVT_LEVEL_TRIGGER;
- apic_write(APIC_LVT1, value);
-}
-
-static void __cpuinit lapic_setup_esr(void)
-{
- unsigned long oldvalue, value, maxlvt;
- if (lapic_is_integrated() && !esr_disable) {
- if (esr_disable) {
- /*
- * Something untraceable is creating bad interrupts on
- * secondary quads ... for the moment, just leave the
- * ESR disabled - we can't do anything useful with the
- * errors anyway - mbligh
- */
- printk(KERN_INFO "Leaving ESR disabled.\n");
- return;
- }
- /* !82489DX */
- maxlvt = lapic_get_maxlvt();
- if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
- apic_write(APIC_ESR, 0);
- oldvalue = apic_read(APIC_ESR);
-
- /* enables sending errors */
- value = ERROR_APIC_VECTOR;
- apic_write(APIC_LVTERR, value);
- /*
- * spec says clear errors after enabling vector.
- */
- if (maxlvt > 3)
- apic_write(APIC_ESR, 0);
- value = apic_read(APIC_ESR);
- if (value != oldvalue)
- apic_printk(APIC_VERBOSE, "ESR value before enabling "
- "vector: 0x%08lx after: 0x%08lx\n",
- oldvalue, value);
- } else {
- printk(KERN_INFO "No ESR for 82489DX.\n");
- }
-}
-
-
-/**
- * setup_local_APIC - setup the local APIC
- */
-void __cpuinit setup_local_APIC(void)
-{
- unsigned int value;
- int i, j;
-
- preempt_disable();
- value = apic_read(APIC_LVR);
-
- BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f);
-
- /*
- * Double-check whether this APIC is really registered.
- * This is meaningless in clustered apic mode, so we skip it.
- */
- if (!apic_id_registered())
- BUG();
-
- /*
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
- */
- init_apic_ldr();
-
- /*
- * Set Task Priority to 'accept all'. We never change this
- * later on.
- */
- value = apic_read(APIC_TASKPRI);
- value &= ~APIC_TPRI_MASK;
- apic_write(APIC_TASKPRI, value);
-
- /*
- * After a crash, we no longer service the interrupts and a pending
- * interrupt from previous kernel might still have ISR bit set.
- *
- * Most probably by now CPU has serviced that pending interrupt and
- * it might not have done the ack_APIC_irq() because it thought,
- * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
- * does not clear the ISR bit and cpu thinks it has already serivced
- * the interrupt. Hence a vector might get locked. It was noticed
- * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
- */
- for (i = APIC_ISR_NR - 1; i >= 0; i--) {
- value = apic_read(APIC_ISR + i*0x10);
- for (j = 31; j >= 0; j--) {
- if (value & (1<<j))
- ack_APIC_irq();
- }
- }
-
- /*
- * Now that we are all set up, enable the APIC
- */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- /*
- * Enable APIC
- */
- value |= APIC_SPIV_APIC_ENABLED;
-
- /* We always use processor focus */
-
- /*
- * Set spurious IRQ vector
- */
- value |= SPURIOUS_APIC_VECTOR;
- apic_write(APIC_SPIV, value);
-
- /*
- * Set up LVT0, LVT1:
- *
- * set up through-local-APIC on the BP's LINT0. This is not
- * strictly necessary in pure symmetric-IO mode, but sometimes
- * we delegate interrupts to the 8259A.
- */
- /*
- * TODO: set up through-local-APIC from through-I/O-APIC? --macro
- */
- value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
- if (!smp_processor_id() && !value) {
- value = APIC_DM_EXTINT;
- apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
- smp_processor_id());
- } else {
- value = APIC_DM_EXTINT | APIC_LVT_MASKED;
- apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
- smp_processor_id());
- }
- apic_write(APIC_LVT0, value);
-
- /*
- * only the BP should see the LINT1 NMI signal, obviously.
- */
- if (!smp_processor_id())
- value = APIC_DM_NMI;
- else
- value = APIC_DM_NMI | APIC_LVT_MASKED;
- apic_write(APIC_LVT1, value);
- preempt_enable();
-}
-
-void __cpuinit end_local_APIC_setup(void)
-{
- lapic_setup_esr();
-
-#ifdef CONFIG_X86_32
- {
- unsigned int value;
- /* Disable the local apic timer */
- value = apic_read(APIC_LVTT);
- value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
- apic_write(APIC_LVTT, value);
- }
-#endif
-
- setup_apic_nmi_watchdog(NULL);
- apic_pm_activate();
-}
-
-void check_x2apic(void)
-{
- int msr, msr2;
-
- rdmsr(MSR_IA32_APICBASE, msr, msr2);
-
- if (msr & X2APIC_ENABLE) {
- printk("x2apic enabled by BIOS, switching to x2apic ops\n");
- x2apic_preenabled = x2apic = 1;
- apic_ops = &x2apic_ops;
- }
-}
-
-void enable_x2apic(void)
-{
- int msr, msr2;
-
- rdmsr(MSR_IA32_APICBASE, msr, msr2);
- if (!(msr & X2APIC_ENABLE)) {
- printk("Enabling x2apic\n");
- wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
- }
-}
-
-void enable_IR_x2apic(void)
-{
-#ifdef CONFIG_INTR_REMAP
- int ret;
- unsigned long flags;
-
- if (!cpu_has_x2apic)
- return;
-
- if (!x2apic_preenabled && disable_x2apic) {
- printk(KERN_INFO
- "Skipped enabling x2apic and Interrupt-remapping "
- "because of nox2apic\n");
- return;
- }
-
- if (x2apic_preenabled && disable_x2apic)
- panic("Bios already enabled x2apic, can't enforce nox2apic");
-
- if (!x2apic_preenabled && skip_ioapic_setup) {
- printk(KERN_INFO
- "Skipped enabling x2apic and Interrupt-remapping "
- "because of skipping io-apic setup\n");
- return;
- }
-
- ret = dmar_table_init();
- if (ret) {
- printk(KERN_INFO
- "dmar_table_init() failed with %d:\n", ret);
-
- if (x2apic_preenabled)
- panic("x2apic enabled by bios. But IR enabling failed");
- else
- printk(KERN_INFO
- "Not enabling x2apic,Intr-remapping\n");
- return;
- }
-
- local_irq_save(flags);
- mask_8259A();
- save_mask_IO_APIC_setup();
-
- ret = enable_intr_remapping(1);
-
- if (ret && x2apic_preenabled) {
- local_irq_restore(flags);
- panic("x2apic enabled by bios. But IR enabling failed");
- }
-
- if (ret)
- goto end;
-
- if (!x2apic) {
- x2apic = 1;
- apic_ops = &x2apic_ops;
- enable_x2apic();
- }
-end:
- if (ret)
- /*
- * IR enabling failed
- */
- restore_IO_APIC_setup();
- else
- reinit_intr_remapped_IO_APIC(x2apic_preenabled);
-
- unmask_8259A();
- local_irq_restore(flags);
-
- if (!ret) {
- if (!x2apic_preenabled)
- printk(KERN_INFO
- "Enabled x2apic and interrupt-remapping\n");
- else
- printk(KERN_INFO
- "Enabled Interrupt-remapping\n");
- } else
- printk(KERN_ERR
- "Failed to enable Interrupt-remapping and x2apic\n");
-#else
- if (!cpu_has_x2apic)
- return;
-
- if (x2apic_preenabled)
- panic("x2apic enabled prior OS handover,"
- " enable CONFIG_INTR_REMAP");
-
- printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping "
- " and x2apic\n");
-#endif
-
- return;
-}
-
-/*
- * Detect and enable local APICs on non-SMP boards.
- * Original code written by Keir Fraser.
- * On AMD64 we trust the BIOS - if it says no APIC it is likely
- * not correctly set up (usually the APIC timer won't work etc.)
- */
-static int __init detect_init_APIC(void)
-{
- if (!cpu_has_apic) {
- printk(KERN_INFO "No local APIC present\n");
- return -1;
- }
-
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
- boot_cpu_physical_apicid = 0;
- return 0;
-}
-
-void __init early_init_lapic_mapping(void)
-{
- unsigned long phys_addr;
-
- /*
- * If no local APIC can be found then go out
- * : it means there is no mpatable and MADT
- */
- if (!smp_found_config)
- return;
-
- phys_addr = mp_lapic_addr;
-
- set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
- apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
- APIC_BASE, phys_addr);
-
- /*
- * Fetch the APIC ID of the BSP in case we have a
- * default configuration (or the MP table is broken).
- */
- boot_cpu_physical_apicid = read_apic_id();
-}
-
-/**
- * init_apic_mappings - initialize APIC mappings
- */
-void __init init_apic_mappings(void)
-{
- if (x2apic) {
- boot_cpu_physical_apicid = read_apic_id();
- return;
- }
-
- /*
- * If no local APIC can be found then set up a fake all
- * zeroes page to simulate the local APIC and another
- * one for the IO-APIC.
- */
- if (!smp_found_config && detect_init_APIC()) {
- apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
- apic_phys = __pa(apic_phys);
- } else
- apic_phys = mp_lapic_addr;
-
- set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
- apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
- APIC_BASE, apic_phys);
-
- /*
- * Fetch the APIC ID of the BSP in case we have a
- * default configuration (or the MP table is broken).
- */
- boot_cpu_physical_apicid = read_apic_id();
-}
-
-/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
- */
-int apic_version[MAX_APICS];
-
-int __init APIC_init_uniprocessor(void)
-{
- if (disable_apic) {
- printk(KERN_INFO "Apic disabled\n");
- return -1;
- }
- if (!cpu_has_apic) {
- disable_apic = 1;
- printk(KERN_INFO "Apic disabled by BIOS\n");
- return -1;
- }
-
- enable_IR_x2apic();
- setup_apic_routing();
-
- verify_local_APIC();
-
- connect_bsp_APIC();
-
- physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
- apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
-
- setup_local_APIC();
-
- /*
- * Now enable IO-APICs, actually call clear_IO_APIC
- * We need clear_IO_APIC before enabling vector on BP
- */
- if (!skip_ioapic_setup && nr_ioapics)
- enable_IO_APIC();
-
- if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
- localise_nmi_watchdog();
- end_local_APIC_setup();
-
- if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
- else
- nr_ioapics = 0;
- setup_boot_APIC_clock();
- check_nmi_watchdog();
- return 0;
-}
-
-/*
- * Local APIC interrupts
- */
-
-/*
- * This interrupt should _never_ happen with our APIC/SMP architecture
- */
-asmlinkage void smp_spurious_interrupt(void)
-{
- unsigned int v;
- exit_idle();
- irq_enter();
- /*
- * Check if this really is a spurious interrupt and ACK it
- * if it is a vectored one. Just in case...
- * Spurious interrupts should not be ACKed.
- */
- v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
- if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
- ack_APIC_irq();
-
- add_pda(irq_spurious_count, 1);
- irq_exit();
-}
-
-/*
- * This interrupt should never happen with our APIC/SMP architecture
- */
-asmlinkage void smp_error_interrupt(void)
-{
- unsigned int v, v1;
-
- exit_idle();
- irq_enter();
- /* First tickle the hardware, only then report what went on. -- REW */
- v = apic_read(APIC_ESR);
- apic_write(APIC_ESR, 0);
- v1 = apic_read(APIC_ESR);
- ack_APIC_irq();
- atomic_inc(&irq_err_count);
-
- /* Here is what the APIC error bits mean:
- 0: Send CS error
- 1: Receive CS error
- 2: Send accept error
- 3: Receive accept error
- 4: Reserved
- 5: Send illegal vector
- 6: Received illegal vector
- 7: Illegal register address
- */
- printk(KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n",
- smp_processor_id(), v , v1);
- irq_exit();
-}
-
-/**
- * connect_bsp_APIC - attach the APIC to the interrupt system
- */
-void __init connect_bsp_APIC(void)
-{
-#ifdef CONFIG_X86_32
- if (pic_mode) {
- /*
- * Do not trust the local APIC being empty at bootup.
- */
- clear_local_APIC();
- /*
- * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's
- * local APIC to INT and NMI lines.
- */
- apic_printk(APIC_VERBOSE, "leaving PIC mode, "
- "enabling APIC mode.\n");
- outb(0x70, 0x22);
- outb(0x01, 0x23);
- }
-#endif
- enable_apic_mode();
-}
-
-/**
- * disconnect_bsp_APIC - detach the APIC from the interrupt system
- * @virt_wire_setup: indicates, whether virtual wire mode is selected
- *
- * Virtual wire mode is necessary to deliver legacy interrupts even when the
- * APIC is disabled.
- */
-void disconnect_bsp_APIC(int virt_wire_setup)
-{
- unsigned int value;
-
-#ifdef CONFIG_X86_32
- if (pic_mode) {
- /*
- * Put the board back into PIC mode (has an effect only on
- * certain older boards). Note that APIC interrupts, including
- * IPIs, won't work beyond this point! The only exception are
- * INIT IPIs.
- */
- apic_printk(APIC_VERBOSE, "disabling APIC mode, "
- "entering PIC mode.\n");
- outb(0x70, 0x22);
- outb(0x00, 0x23);
- return;
- }
-#endif
-
- /* Go back to Virtual Wire compatibility mode */
-
- /* For the spurious interrupt use vector F, and enable it */
- value = apic_read(APIC_SPIV);
- value &= ~APIC_VECTOR_MASK;
- value |= APIC_SPIV_APIC_ENABLED;
- value |= 0xf;
- apic_write(APIC_SPIV, value);
-
- if (!virt_wire_setup) {
- /*
- * For LVT0 make it edge triggered, active high,
- * external and enabled
- */
- value = apic_read(APIC_LVT0);
- value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
- APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
- value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
- apic_write(APIC_LVT0, value);
- } else {
- /* Disable LVT0 */
- apic_write(APIC_LVT0, APIC_LVT_MASKED);
- }
-
- /*
- * For LVT1 make it edge triggered, active high,
- * nmi and enabled
- */
- value = apic_read(APIC_LVT1);
- value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
- APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
- value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
- value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
- apic_write(APIC_LVT1, value);
-}
-
-void __cpuinit generic_processor_info(int apicid, int version)
-{
- int cpu;
- cpumask_t tmp_map;
-
- /*
- * Validate version
- */
- if (version == 0x0) {
- printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
- "fixing up to 0x10. (tell your hw vendor)\n",
- version);
- version = 0x10;
- }
- apic_version[apicid] = version;
-
- if (num_processors >= NR_CPUS) {
- printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
- " Processor ignored.\n", NR_CPUS);
- return;
- }
-
- num_processors++;
- cpus_complement(tmp_map, cpu_present_map);
- cpu = first_cpu(tmp_map);
-
- physid_set(apicid, phys_cpu_present_map);
- if (apicid == boot_cpu_physical_apicid) {
- /*
- * x86_bios_cpu_apicid is required to have processors listed
- * in same order as logical cpu numbers. Hence the first
- * entry is BSP, and so on.
- */
- cpu = 0;
- }
- if (apicid > max_physical_apicid)
- max_physical_apicid = apicid;
-
-#ifdef CONFIG_X86_32
- /*
- * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
- * but we need to work other dependencies like SMP_SUSPEND etc
- * before this can be done without some confusion.
- * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
- * - Ashok Raj <ashok.raj@intel.com>
- */
- if (max_physical_apicid >= 8) {
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (!APIC_XAPIC(version)) {
- def_to_bigsmp = 0;
- break;
- }
- /* If P4 and above fall through */
- case X86_VENDOR_AMD:
- def_to_bigsmp = 1;
- }
- }
-#endif
-
-#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
- /* are we being called early in kernel startup? */
- if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
- u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
- u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
-
- cpu_to_apicid[cpu] = apicid;
- bios_cpu_apicid[cpu] = apicid;
- } else {
- per_cpu(x86_cpu_to_apicid, cpu) = apicid;
- per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
- }
-#endif
-
- cpu_set(cpu, cpu_possible_map);
- cpu_set(cpu, cpu_present_map);
-}
-
-int hard_smp_processor_id(void)
-{
- return read_apic_id();
-}
-
-/*
- * Power management
- */
-#ifdef CONFIG_PM
-
-static struct {
- /*
- * 'active' is true if the local APIC was enabled by us and
- * not the BIOS; this signifies that we are also responsible
- * for disabling it before entering apm/acpi suspend
- */
- int active;
- /* r/w apic fields */
- unsigned int apic_id;
- unsigned int apic_taskpri;
- unsigned int apic_ldr;
- unsigned int apic_dfr;
- unsigned int apic_spiv;
- unsigned int apic_lvtt;
- unsigned int apic_lvtpc;
- unsigned int apic_lvt0;
- unsigned int apic_lvt1;
- unsigned int apic_lvterr;
- unsigned int apic_tmict;
- unsigned int apic_tdcr;
- unsigned int apic_thmr;
-} apic_pm_state;
-
-static int lapic_suspend(struct sys_device *dev, pm_message_t state)
-{
- unsigned long flags;
- int maxlvt;
-
- if (!apic_pm_state.active)
- return 0;
-
- maxlvt = lapic_get_maxlvt();
-
- apic_pm_state.apic_id = apic_read(APIC_ID);
- apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
- apic_pm_state.apic_ldr = apic_read(APIC_LDR);
- apic_pm_state.apic_dfr = apic_read(APIC_DFR);
- apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
- apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
- if (maxlvt >= 4)
- apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
- apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
- apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
- apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
- apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
- apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
- if (maxlvt >= 5)
- apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
-#endif
-
- local_irq_save(flags);
- disable_local_APIC();
- local_irq_restore(flags);
- return 0;
-}
-
-static int lapic_resume(struct sys_device *dev)
-{
- unsigned int l, h;
- unsigned long flags;
- int maxlvt;
-
- if (!apic_pm_state.active)
- return 0;
-
- maxlvt = lapic_get_maxlvt();
-
- local_irq_save(flags);
-
-#ifdef CONFIG_X86_64
- if (x2apic)
- enable_x2apic();
- else
-#endif
- {
- /*
- * Make sure the APICBASE points to the right address
- *
- * FIXME! This will be wrong if we ever support suspend on
- * SMP! We'll need to do this as part of the CPU restore!
- */
- rdmsr(MSR_IA32_APICBASE, l, h);
- l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
- wrmsr(MSR_IA32_APICBASE, l, h);
- }
-
- apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
- apic_write(APIC_ID, apic_pm_state.apic_id);
- apic_write(APIC_DFR, apic_pm_state.apic_dfr);
- apic_write(APIC_LDR, apic_pm_state.apic_ldr);
- apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
- apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
- apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
- apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
- if (maxlvt >= 5)
- apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
-#endif
- if (maxlvt >= 4)
- apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
- apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
- apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
- apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
- apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-/*
- * This device has no shutdown method - fully functioning local APICs
- * are needed on every CPU up until machine_halt/restart/poweroff.
- */
-
-static struct sysdev_class lapic_sysclass = {
- .name = "lapic",
- .resume = lapic_resume,
- .suspend = lapic_suspend,
-};
-
-static struct sys_device device_lapic = {
- .id = 0,
- .cls = &lapic_sysclass,
-};
-
-static void __cpuinit apic_pm_activate(void)
-{
- apic_pm_state.active = 1;
-}
-
-static int __init init_lapic_sysfs(void)
-{
- int error;
-
- if (!cpu_has_apic)
- return 0;
- /* XXX: remove suspend/resume procs if !apic_pm_state.active? */
-
- error = sysdev_class_register(&lapic_sysclass);
- if (!error)
- error = sysdev_register(&device_lapic);
- return error;
-}
-device_initcall(init_lapic_sysfs);
-
-#else /* CONFIG_PM */
-
-static void apic_pm_activate(void) { }
-
-#endif /* CONFIG_PM */
-
-/*
- * apic_is_clustered_box() -- Check if we can expect good TSC
- *
- * Thus far, the major user of this is IBM's Summit2 series:
- *
- * Clustered boxes may have unsynced TSC problems if they are
- * multi-chassis. Use available data to take a good guess.
- * If in doubt, go HPET.
- */
-__cpuinit int apic_is_clustered_box(void)
-{
- int i, clusters, zeros;
- unsigned id;
- u16 *bios_cpu_apicid;
- DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
-
- /*
- * there is not this kind of box with AMD CPU yet.
- * Some AMD box with quadcore cpu and 8 sockets apicid
- * will be [4, 0x23] or [8, 0x27] could be thought to
- * vsmp box still need checking...
- */
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
- return 0;
-
- bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
- bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
-
- for (i = 0; i < NR_CPUS; i++) {
- /* are we being called early in kernel startup? */
- if (bios_cpu_apicid) {
- id = bios_cpu_apicid[i];
- }
- else if (i < nr_cpu_ids) {
- if (cpu_present(i))
- id = per_cpu(x86_bios_cpu_apicid, i);
- else
- continue;
- }
- else
- break;
-
- if (id != BAD_APICID)
- __set_bit(APIC_CLUSTERID(id), clustermap);
- }
-
- /* Problem: Partially populated chassis may not have CPUs in some of
- * the APIC clusters they have been allocated. Only present CPUs have
- * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap.
- * Since clusters are allocated sequentially, count zeros only if
- * they are bounded by ones.
- */
- clusters = 0;
- zeros = 0;
- for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
- if (test_bit(i, clustermap)) {
- clusters += 1 + zeros;
- zeros = 0;
- } else
- ++zeros;
- }
-
- /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
- * not guaranteed to be synced between boards
- */
- if (is_vsmp_box() && clusters > 1)
- return 1;
-
- /*
- * If clusters > 2, then should be multi-chassis.
- * May have to revisit this when multi-core + hyperthreaded CPUs come
- * out, but AFAIK this will work even for them.
- */
- return (clusters > 2);
-}
-
-static __init int setup_nox2apic(char *str)
-{
- disable_x2apic = 1;
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC);
- return 0;
-}
-early_param("nox2apic", setup_nox2apic);
-
-
-/*
- * APIC command line parameters
- */
-static int __init setup_disableapic(char *arg)
-{
- disable_apic = 1;
- setup_clear_cpu_cap(X86_FEATURE_APIC);
- return 0;
-}
-early_param("disableapic", setup_disableapic);
-
-/* same as disableapic, for compatibility */
-static int __init setup_nolapic(char *arg)
-{
- return setup_disableapic(arg);
-}
-early_param("nolapic", setup_nolapic);
-
-static int __init parse_lapic_timer_c2_ok(char *arg)
-{
- local_apic_timer_c2_ok = 1;
- return 0;
-}
-early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
-
-static int __init parse_disable_apic_timer(char *arg)
-{
- disable_apic_timer = 1;
- return 0;
-}
-early_param("noapictimer", parse_disable_apic_timer);
-
-static int __init parse_nolapic_timer(char *arg)
-{
- disable_apic_timer = 1;
- return 0;
-}
-early_param("nolapic_timer", parse_nolapic_timer);
-
-static __init int setup_apicpmtimer(char *s)
-{
- apic_calibrate_pmtmr = 1;
- notsc_setup(NULL);
- return 0;
-}
-__setup("apicpmtimer", setup_apicpmtimer);
-
-static int __init apic_set_verbosity(char *arg)
-{
- if (!arg) {
-#ifdef CONFIG_X86_64
- skip_ioapic_setup = 0;
- ioapic_force = 1;
- return 0;
-#endif
- return -EINVAL;
- }
-
- if (strcmp("debug", arg) == 0)
- apic_verbosity = APIC_DEBUG;
- else if (strcmp("verbose", arg) == 0)
- apic_verbosity = APIC_VERBOSE;
- else {
- printk(KERN_WARNING "APIC Verbosity level %s not recognised"
- " use apic=verbose or apic=debug\n", arg);
- return -EINVAL;
- }
-
- return 0;
-}
-early_param("apic", apic_set_verbosity);
-
-static int __init lapic_insert_resource(void)
-{
- if (!apic_phys)
- return -1;
-
- /* Put local APIC into the resource map. */
- lapic_resource.start = apic_phys;
- lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
- insert_resource(&iomem_resource, &lapic_resource);
-
- return 0;
-}
-
-/*
- * need call insert after e820_reserve_resources()
- * that is using request_resource
- */
-late_initcall(lapic_insert_resource);