diff options
Diffstat (limited to 'arch/x86/kernel/cpu/centaur.c')
| -rw-r--r-- | arch/x86/kernel/cpu/centaur.c | 490 |
1 files changed, 244 insertions, 246 deletions
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index 9681fa15ddf..e0f45edd6a5 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -1,31 +1,34 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/bitops.h> + #include <asm/processor.h> #include <asm/msr.h> #include <asm/e820.h> #include <asm/mtrr.h> + #include "cpu.h" #ifdef CONFIG_X86_OOSTORE static u32 __cpuinit power2(u32 x) { - u32 s=1; - while(s<=x) - s<<=1; - return s>>=1; + u32 s = 1; + + while (s <= x) + s <<= 1; + + return s >>= 1; } /* - * Set up an actual MCR + * Set up an actual MCR */ - static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key) { u32 lo, hi; - + hi = base & ~0xFFF; lo = ~(size-1); /* Size is a power of 2 so this makes a mask */ lo &= ~0xFFF; /* Remove the ctrl value bits */ @@ -35,30 +38,28 @@ static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key) } /* - * Figure what we can cover with MCR's + * Figure what we can cover with MCR's * - * Shortcut: We know you can't put 4Gig of RAM on a winchip + * Shortcut: We know you can't put 4Gig of RAM on a winchip */ - -static u32 __cpuinit ramtop(void) /* 16388 */ +static u32 __cpuinit ramtop(void) { - int i; - u32 top = 0; u32 clip = 0xFFFFFFFFUL; - + u32 top = 0; + int i; + for (i = 0; i < e820.nr_map; i++) { unsigned long start, end; if (e820.map[i].addr > 0xFFFFFFFFUL) continue; /* - * Don't MCR over reserved space. Ignore the ISA hole - * we frob around that catastrophe already + * Don't MCR over reserved space. Ignore the ISA hole + * we frob around that catastrophe already */ - - if (e820.map[i].type == E820_RESERVED) - { - if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip) + if (e820.map[i].type == E820_RESERVED) { + if (e820.map[i].addr >= 0x100000UL && + e820.map[i].addr < clip) clip = e820.map[i].addr; continue; } @@ -69,28 +70,27 @@ static u32 __cpuinit ramtop(void) /* 16388 */ if (end > top) top = end; } - /* Everything below 'top' should be RAM except for the ISA hole. - Because of the limited MCR's we want to map NV/ACPI into our - MCR range for gunk in RAM - - Clip might cause us to MCR insufficient RAM but that is an - acceptable failure mode and should only bite obscure boxes with - a VESA hole at 15Mb - - The second case Clip sometimes kicks in is when the EBDA is marked - as reserved. Again we fail safe with reasonable results - */ - - if(top>clip) - top=clip; - + /* + * Everything below 'top' should be RAM except for the ISA hole. + * Because of the limited MCR's we want to map NV/ACPI into our + * MCR range for gunk in RAM + * + * Clip might cause us to MCR insufficient RAM but that is an + * acceptable failure mode and should only bite obscure boxes with + * a VESA hole at 15Mb + * + * The second case Clip sometimes kicks in is when the EBDA is marked + * as reserved. Again we fail safe with reasonable results + */ + if (top > clip) + top = clip; + return top; } /* - * Compute a set of MCR's to give maximum coverage + * Compute a set of MCR's to give maximum coverage */ - static int __cpuinit centaur_mcr_compute(int nr, int key) { u32 mem = ramtop(); @@ -99,141 +99,131 @@ static int __cpuinit centaur_mcr_compute(int nr, int key) u32 top = root; u32 floor = 0; int ct = 0; - - while(ct<nr) - { + + while (ct < nr) { u32 fspace = 0; + u32 high; + u32 low; /* - * Find the largest block we will fill going upwards + * Find the largest block we will fill going upwards */ - - u32 high = power2(mem-top); + high = power2(mem-top); /* - * Find the largest block we will fill going downwards + * Find the largest block we will fill going downwards */ - - u32 low = base/2; + low = base/2; /* - * Don't fill below 1Mb going downwards as there - * is an ISA hole in the way. - */ - - if(base <= 1024*1024) + * Don't fill below 1Mb going downwards as there + * is an ISA hole in the way. + */ + if (base <= 1024*1024) low = 0; - + /* - * See how much space we could cover by filling below - * the ISA hole + * See how much space we could cover by filling below + * the ISA hole */ - - if(floor == 0) + + if (floor == 0) fspace = 512*1024; - else if(floor ==512*1024) + else if (floor == 512*1024) fspace = 128*1024; /* And forget ROM space */ - + /* - * Now install the largest coverage we get + * Now install the largest coverage we get */ - - if(fspace > high && fspace > low) - { + if (fspace > high && fspace > low) { centaur_mcr_insert(ct, floor, fspace, key); floor += fspace; - } - else if(high > low) - { + } else if (high > low) { centaur_mcr_insert(ct, top, high, key); top += high; - } - else if(low > 0) - { + } else if (low > 0) { base -= low; centaur_mcr_insert(ct, base, low, key); - } - else break; + } else + break; ct++; } /* - * We loaded ct values. We now need to set the mask. The caller - * must do this bit. + * We loaded ct values. We now need to set the mask. The caller + * must do this bit. */ - return ct; } static void __cpuinit centaur_create_optimal_mcr(void) { + int used; int i; + /* - * Allocate up to 6 mcrs to mark as much of ram as possible - * as write combining and weak write ordered. + * Allocate up to 6 mcrs to mark as much of ram as possible + * as write combining and weak write ordered. * - * To experiment with: Linux never uses stack operations for - * mmio spaces so we could globally enable stack operation wc + * To experiment with: Linux never uses stack operations for + * mmio spaces so we could globally enable stack operation wc * - * Load the registers with type 31 - full write combining, all - * writes weakly ordered. + * Load the registers with type 31 - full write combining, all + * writes weakly ordered. */ - int used = centaur_mcr_compute(6, 31); + used = centaur_mcr_compute(6, 31); /* - * Wipe unused MCRs + * Wipe unused MCRs */ - - for(i=used;i<8;i++) + for (i = used; i < 8; i++) wrmsr(MSR_IDT_MCR0+i, 0, 0); } static void __cpuinit winchip2_create_optimal_mcr(void) { u32 lo, hi; + int used; int i; /* - * Allocate up to 6 mcrs to mark as much of ram as possible - * as write combining, weak store ordered. + * Allocate up to 6 mcrs to mark as much of ram as possible + * as write combining, weak store ordered. * - * Load the registers with type 25 - * 8 - weak write ordering - * 16 - weak read ordering - * 1 - write combining + * Load the registers with type 25 + * 8 - weak write ordering + * 16 - weak read ordering + * 1 - write combining */ + used = centaur_mcr_compute(6, 25); - int used = centaur_mcr_compute(6, 25); - /* - * Mark the registers we are using. + * Mark the registers we are using. */ - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - for(i=0;i<used;i++) - lo|=1<<(9+i); + for (i = 0; i < used; i++) + lo |= 1<<(9+i); wrmsr(MSR_IDT_MCR_CTRL, lo, hi); - + /* - * Wipe unused MCRs + * Wipe unused MCRs */ - - for(i=used;i<8;i++) + + for (i = used; i < 8; i++) wrmsr(MSR_IDT_MCR0+i, 0, 0); } /* - * Handle the MCR key on the Winchip 2. + * Handle the MCR key on the Winchip 2. */ - static void __cpuinit winchip2_unprotect_mcr(void) { u32 lo, hi; u32 key; - + rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - lo&=~0x1C0; /* blank bits 8-6 */ + lo &= ~0x1C0; /* blank bits 8-6 */ key = (lo>>17) & 7; lo |= key<<6; /* replace with unlock key */ wrmsr(MSR_IDT_MCR_CTRL, lo, hi); @@ -242,9 +232,9 @@ static void __cpuinit winchip2_unprotect_mcr(void) static void __cpuinit winchip2_protect_mcr(void) { u32 lo, hi; - + rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - lo&=~0x1C0; /* blank bits 8-6 */ + lo &= ~0x1C0; /* blank bits 8-6 */ wrmsr(MSR_IDT_MCR_CTRL, lo, hi); } #endif /* CONFIG_X86_OOSTORE */ @@ -267,17 +257,17 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c) /* enable ACE unit, if present and disabled */ if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) { - rdmsr (MSR_VIA_FCR, lo, hi); + rdmsr(MSR_VIA_FCR, lo, hi); lo |= ACE_FCR; /* enable ACE unit */ - wrmsr (MSR_VIA_FCR, lo, hi); + wrmsr(MSR_VIA_FCR, lo, hi); printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n"); } /* enable RNG unit, if present and disabled */ if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) { - rdmsr (MSR_VIA_RNG, lo, hi); + rdmsr(MSR_VIA_RNG, lo, hi); lo |= RNG_ENABLE; /* enable RNG unit */ - wrmsr (MSR_VIA_RNG, lo, hi); + wrmsr(MSR_VIA_RNG, lo, hi); printk(KERN_INFO "CPU: Enabled h/w RNG\n"); } @@ -288,171 +278,183 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c) } /* Cyrix III family needs CX8 & PGE explicitly enabled. */ - if (c->x86_model >=6 && c->x86_model <= 9) { - rdmsr (MSR_VIA_FCR, lo, hi); + if (c->x86_model >= 6 && c->x86_model <= 9) { + rdmsr(MSR_VIA_FCR, lo, hi); lo |= (1<<1 | 1<<7); - wrmsr (MSR_VIA_FCR, lo, hi); - set_bit(X86_FEATURE_CX8, c->x86_capability); + wrmsr(MSR_VIA_FCR, lo, hi); + set_cpu_cap(c, X86_FEATURE_CX8); } /* Before Nehemiah, the C3's had 3dNOW! */ - if (c->x86_model >=6 && c->x86_model <9) - set_bit(X86_FEATURE_3DNOW, c->x86_capability); + if (c->x86_model >= 6 && c->x86_model < 9) + set_cpu_cap(c, X86_FEATURE_3DNOW); get_model_name(c); display_cacheinfo(c); } +enum { + ECX8 = 1<<1, + EIERRINT = 1<<2, + DPM = 1<<3, + DMCE = 1<<4, + DSTPCLK = 1<<5, + ELINEAR = 1<<6, + DSMC = 1<<7, + DTLOCK = 1<<8, + EDCTLB = 1<<8, + EMMX = 1<<9, + DPDC = 1<<11, + EBRPRED = 1<<12, + DIC = 1<<13, + DDC = 1<<14, + DNA = 1<<15, + ERETSTK = 1<<16, + E2MMX = 1<<19, + EAMD3D = 1<<20, +}; + static void __cpuinit init_centaur(struct cpuinfo_x86 *c) { - enum { - ECX8=1<<1, - EIERRINT=1<<2, - DPM=1<<3, - DMCE=1<<4, - DSTPCLK=1<<5, - ELINEAR=1<<6, - DSMC=1<<7, - DTLOCK=1<<8, - EDCTLB=1<<8, - EMMX=1<<9, - DPDC=1<<11, - EBRPRED=1<<12, - DIC=1<<13, - DDC=1<<14, - DNA=1<<15, - ERETSTK=1<<16, - E2MMX=1<<19, - EAMD3D=1<<20, - }; char *name; - u32 fcr_set=0; - u32 fcr_clr=0; - u32 lo,hi,newlo; - u32 aa,bb,cc,dd; + u32 fcr_set = 0; + u32 fcr_clr = 0; + u32 lo, hi, newlo; + u32 aa, bb, cc, dd; - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_bit(0*32+31, c->x86_capability); + /* + * Bit 31 in normal CPUID used for nonstandard 3DNow ID; + * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway + */ + clear_cpu_cap(c, 0*32+31); switch (c->x86) { - - case 5: - switch(c->x86_model) { - case 4: - name="C6"; - fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK; - fcr_clr=DPDC; - printk(KERN_NOTICE "Disabling bugged TSC.\n"); - clear_bit(X86_FEATURE_TSC, c->x86_capability); + case 5: + switch (c->x86_model) { + case 4: + name = "C6"; + fcr_set = ECX8|DSMC|EDCTLB|EMMX|ERETSTK; + fcr_clr = DPDC; + printk(KERN_NOTICE "Disabling bugged TSC.\n"); + clear_cpu_cap(c, X86_FEATURE_TSC); #ifdef CONFIG_X86_OOSTORE - centaur_create_optimal_mcr(); - /* Enable - write combining on non-stack, non-string - write combining on string, all types - weak write ordering - - The C6 original lacks weak read order - - Note 0x120 is write only on Winchip 1 */ - - wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0); -#endif + centaur_create_optimal_mcr(); + /* + * Enable: + * write combining on non-stack, non-string + * write combining on string, all types + * weak write ordering + * + * The C6 original lacks weak read order + * + * Note 0x120 is write only on Winchip 1 + */ + wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0); +#endif + break; + case 8: + switch (c->x86_mask) { + default: + name = "2"; + break; + case 7 ... 9: + name = "2A"; break; - case 8: - switch(c->x86_mask) { - default: - name="2"; - break; - case 7 ... 9: - name="2A"; - break; - case 10 ... 15: - name="2B"; - break; - } - fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D; - fcr_clr=DPDC; + case 10 ... 15: + name = "2B"; + break; + } + fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK| + E2MMX|EAMD3D; + fcr_clr = DPDC; #ifdef CONFIG_X86_OOSTORE - winchip2_unprotect_mcr(); - winchip2_create_optimal_mcr(); - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - /* Enable - write combining on non-stack, non-string - write combining on string, all types - weak write ordering - */ - lo|=31; - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); - winchip2_protect_mcr(); + winchip2_unprotect_mcr(); + winchip2_create_optimal_mcr(); + rdmsr(MSR_IDT_MCR_CTRL, lo, hi); + /* + * Enable: + * write combining on non-stack, non-string + * write combining on string, all types + * weak write ordering + */ + lo |= 31; + wrmsr(MSR_IDT_MCR_CTRL, lo, hi); + winchip2_protect_mcr(); #endif - break; - case 9: - name="3"; - fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D; - fcr_clr=DPDC; + break; + case 9: + name = "3"; + fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK| + E2MMX|EAMD3D; + fcr_clr = DPDC; #ifdef CONFIG_X86_OOSTORE - winchip2_unprotect_mcr(); - winchip2_create_optimal_mcr(); - rdmsr(MSR_IDT_MCR_CTRL, lo, hi); - /* Enable - write combining on non-stack, non-string - write combining on string, all types - weak write ordering - */ - lo|=31; - wrmsr(MSR_IDT_MCR_CTRL, lo, hi); - winchip2_protect_mcr(); + winchip2_unprotect_mcr(); + winchip2_create_optimal_mcr(); + rdmsr(MSR_IDT_MCR_CTRL, lo, hi); + /* + * Enable: + * write combining on non-stack, non-string + * write combining on string, all types + * weak write ordering + */ + lo |= 31; + wrmsr(MSR_IDT_MCR_CTRL, lo, hi); + winchip2_protect_mcr(); #endif - break; - default: - name="??"; - } + break; + default: + name = "??"; + } - rdmsr(MSR_IDT_FCR1, lo, hi); - newlo=(lo|fcr_set) & (~fcr_clr); + rdmsr(MSR_IDT_FCR1, lo, hi); + newlo = (lo|fcr_set) & (~fcr_clr); - if (newlo!=lo) { - printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo ); - wrmsr(MSR_IDT_FCR1, newlo, hi ); - } else { - printk(KERN_INFO "Centaur FCR is 0x%X\n",lo); - } - /* Emulate MTRRs using Centaur's MCR. */ - set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability); - /* Report CX8 */ - set_bit(X86_FEATURE_CX8, c->x86_capability); - /* Set 3DNow! on Winchip 2 and above. */ - if (c->x86_model >=8) - set_bit(X86_FEATURE_3DNOW, c->x86_capability); - /* See if we can find out some more. */ - if ( cpuid_eax(0x80000000) >= 0x80000005 ) { - /* Yes, we can. */ - cpuid(0x80000005,&aa,&bb,&cc,&dd); - /* Add L1 data and code cache sizes. */ - c->x86_cache_size = (cc>>24)+(dd>>24); - } - sprintf( c->x86_model_id, "WinChip %s", name ); - break; + if (newlo != lo) { + printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", + lo, newlo); + wrmsr(MSR_IDT_FCR1, newlo, hi); + } else { + printk(KERN_INFO "Centaur FCR is 0x%X\n", lo); + } + /* Emulate MTRRs using Centaur's MCR. */ + set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR); + /* Report CX8 */ + set_cpu_cap(c, X86_FEATURE_CX8); + /* Set 3DNow! on Winchip 2 and above. */ + if (c->x86_model >= 8) + set_cpu_cap(c, X86_FEATURE_3DNOW); + /* See if we can find out some more. */ + if (cpuid_eax(0x80000000) >= 0x80000005) { + /* Yes, we can. */ + cpuid(0x80000005, &aa, &bb, &cc, &dd); + /* Add L1 data and code cache sizes. */ + c->x86_cache_size = (cc>>24)+(dd>>24); + } + sprintf(c->x86_model_id, "WinChip %s", name); + break; - case 6: - init_c3(c); - break; + case 6: + init_c3(c); + break; } } -static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size) +static unsigned int __cpuinit +centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size) { /* VIA C3 CPUs (670-68F) need further shifting. */ if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8))) size >>= 8; - /* VIA also screwed up Nehemiah stepping 1, and made - it return '65KB' instead of '64KB' - - Note, it seems this may only be in engineering samples. */ - if ((c->x86==6) && (c->x86_model==9) && (c->x86_mask==1) && (size==65)) - size -=1; + /* + * There's also an erratum in Nehemiah stepping 1, which + * returns '65KB' instead of '64KB' + * - Note, it seems this may only be in engineering samples. + */ + if ((c->x86 == 6) && (c->x86_model == 9) && + (c->x86_mask == 1) && (size == 65)) + size -= 1; return size; } @@ -464,8 +466,4 @@ static struct cpu_dev centaur_cpu_dev __cpuinitdata = { .c_size_cache = centaur_size_cache, }; -int __init centaur_init_cpu(void) -{ - cpu_devs[X86_VENDOR_CENTAUR] = ¢aur_cpu_dev; - return 0; -} +cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev); |