summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/cpu/cpufreq/elanfreq.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/cpu/cpufreq/elanfreq.c')
-rw-r--r--arch/x86/kernel/cpu/cpufreq/elanfreq.c309
1 files changed, 0 insertions, 309 deletions
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
deleted file mode 100644
index c587db472a7..00000000000
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * elanfreq: cpufreq driver for the AMD ELAN family
- *
- * (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * Parts of this code are (c) Sven Geggus <sven@geggus.net>
- *
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/delay.h>
-#include <linux/cpufreq.h>
-
-#include <asm/msr.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-
-#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */
-#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */
-
-/* Module parameter */
-static int max_freq;
-
-struct s_elan_multiplier {
- int clock; /* frequency in kHz */
- int val40h; /* PMU Force Mode register */
- int val80h; /* CPU Clock Speed Register */
-};
-
-/*
- * It is important that the frequencies
- * are listed in ascending order here!
- */
-static struct s_elan_multiplier elan_multiplier[] = {
- {1000, 0x02, 0x18},
- {2000, 0x02, 0x10},
- {4000, 0x02, 0x08},
- {8000, 0x00, 0x00},
- {16000, 0x00, 0x02},
- {33000, 0x00, 0x04},
- {66000, 0x01, 0x04},
- {99000, 0x01, 0x05}
-};
-
-static struct cpufreq_frequency_table elanfreq_table[] = {
- {0, 1000},
- {1, 2000},
- {2, 4000},
- {3, 8000},
- {4, 16000},
- {5, 33000},
- {6, 66000},
- {7, 99000},
- {0, CPUFREQ_TABLE_END},
-};
-
-
-/**
- * elanfreq_get_cpu_frequency: determine current cpu speed
- *
- * Finds out at which frequency the CPU of the Elan SOC runs
- * at the moment. Frequencies from 1 to 33 MHz are generated
- * the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
- * and have the rest of the chip running with 33 MHz.
- */
-
-static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
-{
- u8 clockspeed_reg; /* Clock Speed Register */
-
- local_irq_disable();
- outb_p(0x80, REG_CSCIR);
- clockspeed_reg = inb_p(REG_CSCDR);
- local_irq_enable();
-
- if ((clockspeed_reg & 0xE0) == 0xE0)
- return 0;
-
- /* Are we in CPU clock multiplied mode (66/99 MHz)? */
- if ((clockspeed_reg & 0xE0) == 0xC0) {
- if ((clockspeed_reg & 0x01) == 0)
- return 66000;
- else
- return 99000;
- }
-
- /* 33 MHz is not 32 MHz... */
- if ((clockspeed_reg & 0xE0) == 0xA0)
- return 33000;
-
- return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
-}
-
-
-/**
- * elanfreq_set_cpu_frequency: Change the CPU core frequency
- * @cpu: cpu number
- * @freq: frequency in kHz
- *
- * This function takes a frequency value and changes the CPU frequency
- * according to this. Note that the frequency has to be checked by
- * elanfreq_validatespeed() for correctness!
- *
- * There is no return value.
- */
-
-static void elanfreq_set_cpu_state(unsigned int state)
-{
- struct cpufreq_freqs freqs;
-
- freqs.old = elanfreq_get_cpu_frequency(0);
- freqs.new = elan_multiplier[state].clock;
- freqs.cpu = 0; /* elanfreq.c is UP only driver */
-
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
- elan_multiplier[state].clock);
-
-
- /*
- * Access to the Elan's internal registers is indexed via
- * 0x22: Chip Setup & Control Register Index Register (CSCI)
- * 0x23: Chip Setup & Control Register Data Register (CSCD)
- *
- */
-
- /*
- * 0x40 is the Power Management Unit's Force Mode Register.
- * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
- */
-
- local_irq_disable();
- outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */
- outb_p(0x00, REG_CSCDR);
- local_irq_enable(); /* wait till internal pipelines and */
- udelay(1000); /* buffers have cleaned up */
-
- local_irq_disable();
-
- /* now, set the CPU clock speed register (0x80) */
- outb_p(0x80, REG_CSCIR);
- outb_p(elan_multiplier[state].val80h, REG_CSCDR);
-
- /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
- outb_p(0x40, REG_CSCIR);
- outb_p(elan_multiplier[state].val40h, REG_CSCDR);
- udelay(10000);
- local_irq_enable();
-
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-};
-
-
-/**
- * elanfreq_validatespeed: test if frequency range is valid
- * @policy: the policy to validate
- *
- * This function checks if a given frequency range in kHz is valid
- * for the hardware supported by the driver.
- */
-
-static int elanfreq_verify(struct cpufreq_policy *policy)
-{
- return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
-}
-
-static int elanfreq_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- unsigned int newstate = 0;
-
- if (cpufreq_frequency_table_target(policy, &elanfreq_table[0],
- target_freq, relation, &newstate))
- return -EINVAL;
-
- elanfreq_set_cpu_state(newstate);
-
- return 0;
-}
-
-
-/*
- * Module init and exit code
- */
-
-static int elanfreq_cpu_init(struct cpufreq_policy *policy)
-{
- struct cpuinfo_x86 *c = &cpu_data(0);
- unsigned int i;
- int result;
-
- /* capability check */
- if ((c->x86_vendor != X86_VENDOR_AMD) ||
- (c->x86 != 4) || (c->x86_model != 10))
- return -ENODEV;
-
- /* max freq */
- if (!max_freq)
- max_freq = elanfreq_get_cpu_frequency(0);
-
- /* table init */
- for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
- if (elanfreq_table[i].frequency > max_freq)
- elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
- }
-
- /* cpuinfo and default policy values */
- policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
- policy->cur = elanfreq_get_cpu_frequency(0);
-
- result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
- if (result)
- return result;
-
- cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
- return 0;
-}
-
-
-static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
-{
- cpufreq_frequency_table_put_attr(policy->cpu);
- return 0;
-}
-
-
-#ifndef MODULE
-/**
- * elanfreq_setup - elanfreq command line parameter parsing
- *
- * elanfreq command line parameter. Use:
- * elanfreq=66000
- * to set the maximum CPU frequency to 66 MHz. Note that in
- * case you do not give this boot parameter, the maximum
- * frequency will fall back to _current_ CPU frequency which
- * might be lower. If you build this as a module, use the
- * max_freq module parameter instead.
- */
-static int __init elanfreq_setup(char *str)
-{
- max_freq = simple_strtoul(str, &str, 0);
- printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
- return 1;
-}
-__setup("elanfreq=", elanfreq_setup);
-#endif
-
-
-static struct freq_attr *elanfreq_attr[] = {
- &cpufreq_freq_attr_scaling_available_freqs,
- NULL,
-};
-
-
-static struct cpufreq_driver elanfreq_driver = {
- .get = elanfreq_get_cpu_frequency,
- .verify = elanfreq_verify,
- .target = elanfreq_target,
- .init = elanfreq_cpu_init,
- .exit = elanfreq_cpu_exit,
- .name = "elanfreq",
- .owner = THIS_MODULE,
- .attr = elanfreq_attr,
-};
-
-
-static int __init elanfreq_init(void)
-{
- struct cpuinfo_x86 *c = &cpu_data(0);
-
- /* Test if we have the right hardware */
- if ((c->x86_vendor != X86_VENDOR_AMD) ||
- (c->x86 != 4) || (c->x86_model != 10)) {
- printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
- return -ENODEV;
- }
- return cpufreq_register_driver(&elanfreq_driver);
-}
-
-
-static void __exit elanfreq_exit(void)
-{
- cpufreq_unregister_driver(&elanfreq_driver);
-}
-
-
-module_param(max_freq, int, 0444);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
- "Sven Geggus <sven@geggus.net>");
-MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
-
-module_init(elanfreq_init);
-module_exit(elanfreq_exit);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 22:23:53 +0000