diff options
Diffstat (limited to 'arch/x86/kernel/io_apic_32.c')
| -rw-r--r-- | arch/x86/kernel/io_apic_32.c | 49 |
1 files changed, 42 insertions, 7 deletions
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index f35c6eb33da..c3a565bba10 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -962,7 +962,7 @@ static int EISA_ELCR(unsigned int irq) #define default_MCA_trigger(idx) (1) #define default_MCA_polarity(idx) (0) -static int __init MPBIOS_polarity(int idx) +static int MPBIOS_polarity(int idx) { int bus = mp_irqs[idx].mpc_srcbus; int polarity; @@ -1882,13 +1882,16 @@ __setup("no_timer_check", notimercheck); static int __init timer_irq_works(void) { unsigned long t1 = jiffies; + unsigned long flags; if (no_timer_check) return 1; + local_save_flags(flags); local_irq_enable(); /* Let ten ticks pass... */ mdelay((10 * 1000) / HZ); + local_irq_restore(flags); /* * Expect a few ticks at least, to be sure some possible @@ -2166,6 +2169,13 @@ static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; int vector; + unsigned int ver; + unsigned long flags; + + local_irq_save(flags); + + ver = apic_read(APIC_LVR); + ver = GET_APIC_VERSION(ver); /* * get/set the timer IRQ vector: @@ -2179,11 +2189,15 @@ static inline void __init check_timer(void) * mode for the 8259A whenever interrupts are routed * through I/O APICs. Also IRQ0 has to be enabled in * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. + * disabled in the local APIC. Finally timer interrupts + * need to be acknowledged manually in the 8259A for + * timer_interrupt() and for the i82489DX when using + * the NMI watchdog. */ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - timer_ack = 1; + timer_ack = !cpu_has_tsc; + timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); if (timer_over_8254 > 0) enable_8259A_irq(0); @@ -2211,7 +2225,7 @@ static inline void __init check_timer(void) } if (disable_timer_pin_1 > 0) clear_IO_APIC_pin(0, pin1); - return; + goto out; } clear_IO_APIC_pin(apic1, pin1); printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " @@ -2234,7 +2248,7 @@ static inline void __init check_timer(void) if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); } - return; + goto out; } /* * Cleanup, just in case ... @@ -2258,7 +2272,7 @@ static inline void __init check_timer(void) if (timer_irq_works()) { printk(" works.\n"); - return; + goto out; } apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); printk(" failed.\n"); @@ -2274,11 +2288,13 @@ static inline void __init check_timer(void) if (timer_irq_works()) { printk(" works.\n"); - return; + goto out; } printk(" failed :(.\n"); panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " "report. Then try booting with the 'noapic' option"); +out: + local_irq_restore(flags); } /* @@ -2830,6 +2846,25 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a return 0; } +int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) +{ + int i; + + if (skip_ioapic_setup) + return -1; + + for (i = 0; i < mp_irq_entries; i++) + if (mp_irqs[i].mpc_irqtype == mp_INT && + mp_irqs[i].mpc_srcbusirq == bus_irq) + break; + if (i >= mp_irq_entries) + return -1; + + *trigger = irq_trigger(i); + *polarity = irq_polarity(i); + return 0; +} + #endif /* CONFIG_ACPI */ static int __init parse_disable_timer_pin_1(char *arg) |