diff options
Diffstat (limited to 'arch/x86/kernel/mca_32.c')
| -rw-r--r-- | arch/x86/kernel/mca_32.c | 476 |
1 files changed, 0 insertions, 476 deletions
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c deleted file mode 100644 index 7eb1e2b9782..00000000000 --- a/arch/x86/kernel/mca_32.c +++ /dev/null @@ -1,476 +0,0 @@ -/* - * Written by Martin Kolinek, February 1996 - * - * Changes: - * - * Chris Beauregard July 28th, 1996 - * - Fixed up integrated SCSI detection - * - * Chris Beauregard August 3rd, 1996 - * - Made mca_info local - * - Made integrated registers accessible through standard function calls - * - Added name field - * - More sanity checking - * - * Chris Beauregard August 9th, 1996 - * - Rewrote /proc/mca - * - * Chris Beauregard January 7th, 1997 - * - Added basic NMI-processing - * - Added more information to mca_info structure - * - * David Weinehall October 12th, 1998 - * - Made a lot of cleaning up in the source - * - Added use of save_flags / restore_flags - * - Added the 'driver_loaded' flag in MCA_adapter - * - Added an alternative implemention of ZP Gu's mca_find_unused_adapter - * - * David Weinehall March 24th, 1999 - * - Fixed the output of 'Driver Installed' in /proc/mca/pos - * - Made the Integrated Video & SCSI show up even if they have id 0000 - * - * Alexander Viro November 9th, 1999 - * - Switched to regular procfs methods - * - * Alfred Arnold & David Weinehall August 23rd, 2000 - * - Added support for Planar POS-registers - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/mca.h> -#include <linux/kprobes.h> -#include <linux/slab.h> -#include <asm/io.h> -#include <linux/proc_fs.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/pagemap.h> -#include <linux/ioport.h> -#include <asm/uaccess.h> -#include <linux/init.h> - -static unsigned char which_scsi; - -int MCA_bus; -EXPORT_SYMBOL(MCA_bus); - -/* - * Motherboard register spinlock. Untested on SMP at the moment, but - * are there any MCA SMP boxes? - * - * Yes - Alan - */ -static DEFINE_SPINLOCK(mca_lock); - -/* Build the status info for the adapter */ - -static void mca_configure_adapter_status(struct mca_device *mca_dev) -{ - mca_dev->status = MCA_ADAPTER_NONE; - - mca_dev->pos_id = mca_dev->pos[0] - + (mca_dev->pos[1] << 8); - - if (!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) { - - /* - * id = 0x0000 usually indicates hardware failure, - * however, ZP Gu (zpg@castle.net> reports that his 9556 - * has 0x0000 as id and everything still works. There - * also seem to be an adapter with id = 0x0000; the - * NCR Parallel Bus Memory Card. Until this is confirmed, - * however, this code will stay. - */ - - mca_dev->status = MCA_ADAPTER_ERROR; - - return; - } else if (mca_dev->pos_id != 0xffff) { - - /* - * 0xffff usually indicates that there's no adapter, - * however, some integrated adapters may have 0xffff as - * their id and still be valid. Examples are on-board - * VGA of the 55sx, the integrated SCSI of the 56 & 57, - * and possibly also the 95 ULTIMEDIA. - */ - - mca_dev->status = MCA_ADAPTER_NORMAL; - } - - if ((mca_dev->pos_id == 0xffff || - mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) { - int j; - - for (j = 2; j < 8; j++) { - if (mca_dev->pos[j] != 0xff) { - mca_dev->status = MCA_ADAPTER_NORMAL; - break; - } - } - } - - if (!(mca_dev->pos[2] & MCA_ENABLED)) { - - /* enabled bit is in POS 2 */ - - mca_dev->status = MCA_ADAPTER_DISABLED; - } -} /* mca_configure_adapter_status */ - -/*--------------------------------------------------------------------*/ - -static struct resource mca_standard_resources[] = { - { .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" }, - { .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" }, - { .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" }, - { .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" }, - { .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" }, - { .start = 0x96, .end = 0x97, .name = "POS (MCA)" }, - { .start = 0x100, .end = 0x107, .name = "POS (MCA)" } -}; - -#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources) - -/* - * mca_read_and_store_pos - read the POS registers into a memory buffer - * @pos: a char pointer to 8 bytes, contains the POS register value on - * successful return - * - * Returns 1 if a card actually exists (i.e. the pos isn't - * all 0xff) or 0 otherwise - */ -static int mca_read_and_store_pos(unsigned char *pos) -{ - int j; - int found = 0; - - for (j = 0; j < 8; j++) { - pos[j] = inb_p(MCA_POS_REG(j)); - if (pos[j] != 0xff) { - /* 0xff all across means no device. 0x00 means - * something's broken, but a device is - * probably there. However, if you get 0x00 - * from a motherboard register it won't matter - * what we find. For the record, on the - * 57SLC, the integrated SCSI adapter has - * 0xffff for the adapter ID, but nonzero for - * other registers. */ - - found = 1; - } - } - return found; -} - -static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg) -{ - unsigned char byte; - unsigned long flags; - - if (reg < 0 || reg >= 8) - return 0; - - spin_lock_irqsave(&mca_lock, flags); - if (mca_dev->pos_register) { - /* Disable adapter setup, enable motherboard setup */ - - outb_p(0, MCA_ADAPTER_SETUP_REG); - outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); - - byte = inb_p(MCA_POS_REG(reg)); - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - } else { - - /* Make sure motherboard setup is off */ - - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - - /* Read the appropriate register */ - - outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG); - byte = inb_p(MCA_POS_REG(reg)); - outb_p(0, MCA_ADAPTER_SETUP_REG); - } - spin_unlock_irqrestore(&mca_lock, flags); - - mca_dev->pos[reg] = byte; - - return byte; -} - -static void mca_pc_write_pos(struct mca_device *mca_dev, int reg, - unsigned char byte) -{ - unsigned long flags; - - if (reg < 0 || reg >= 8) - return; - - spin_lock_irqsave(&mca_lock, flags); - - /* Make sure motherboard setup is off */ - - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - - /* Read in the appropriate register */ - - outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG); - outb_p(byte, MCA_POS_REG(reg)); - outb_p(0, MCA_ADAPTER_SETUP_REG); - - spin_unlock_irqrestore(&mca_lock, flags); - - /* Update the global register list, while we have the byte */ - - mca_dev->pos[reg] = byte; - -} - -/* for the primary MCA bus, we have identity transforms */ -static int mca_dummy_transform_irq(struct mca_device *mca_dev, int irq) -{ - return irq; -} - -static int mca_dummy_transform_ioport(struct mca_device *mca_dev, int port) -{ - return port; -} - -static void *mca_dummy_transform_memory(struct mca_device *mca_dev, void *mem) -{ - return mem; -} - - -static int __init mca_init(void) -{ - unsigned int i, j; - struct mca_device *mca_dev; - unsigned char pos[8]; - short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00}; - struct mca_bus *bus; - - /* - * WARNING: Be careful when making changes here. Putting an adapter - * and the motherboard simultaneously into setup mode may result in - * damage to chips (according to The Indispensable PC Hardware Book - * by Hans-Peter Messmer). Also, we disable system interrupts (so - * that we are not disturbed in the middle of this). - */ - - /* Make sure the MCA bus is present */ - - if (mca_system_init()) { - printk(KERN_ERR "MCA bus system initialisation failed\n"); - return -ENODEV; - } - - if (!MCA_bus) - return -ENODEV; - - printk(KERN_INFO "Micro Channel bus detected.\n"); - - /* All MCA systems have at least a primary bus */ - bus = mca_attach_bus(MCA_PRIMARY_BUS); - if (!bus) - goto out_nomem; - bus->default_dma_mask = 0xffffffffLL; - bus->f.mca_write_pos = mca_pc_write_pos; - bus->f.mca_read_pos = mca_pc_read_pos; - bus->f.mca_transform_irq = mca_dummy_transform_irq; - bus->f.mca_transform_ioport = mca_dummy_transform_ioport; - bus->f.mca_transform_memory = mca_dummy_transform_memory; - - /* get the motherboard device */ - mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL); - if (unlikely(!mca_dev)) - goto out_nomem; - - /* - * We do not expect many MCA interrupts during initialization, - * but let us be safe: - */ - spin_lock_irq(&mca_lock); - - /* Make sure adapter setup is off */ - - outb_p(0, MCA_ADAPTER_SETUP_REG); - - /* Read motherboard POS registers */ - - mca_dev->pos_register = 0x7f; - outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); - mca_dev->name[0] = 0; - mca_read_and_store_pos(mca_dev->pos); - mca_configure_adapter_status(mca_dev); - /* fake POS and slot for a motherboard */ - mca_dev->pos_id = MCA_MOTHERBOARD_POS; - mca_dev->slot = MCA_MOTHERBOARD; - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - - mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); - if (unlikely(!mca_dev)) - goto out_unlock_nomem; - - /* Put motherboard into video setup mode, read integrated video - * POS registers, and turn motherboard setup off. - */ - - mca_dev->pos_register = 0xdf; - outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); - mca_dev->name[0] = 0; - mca_read_and_store_pos(mca_dev->pos); - mca_configure_adapter_status(mca_dev); - /* fake POS and slot for the integrated video */ - mca_dev->pos_id = MCA_INTEGVIDEO_POS; - mca_dev->slot = MCA_INTEGVIDEO; - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - - /* - * Put motherboard into scsi setup mode, read integrated scsi - * POS registers, and turn motherboard setup off. - * - * It seems there are two possible SCSI registers. Martin says that - * for the 56,57, 0xf7 is the one, but fails on the 76. - * Alfredo (apena@vnet.ibm.com) says - * 0xfd works on his machine. We'll try both of them. I figure it's - * a good bet that only one could be valid at a time. This could - * screw up though if one is used for something else on the other - * machine. - */ - - for (i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) { - outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG); - if (mca_read_and_store_pos(pos)) - break; - } - if (which_scsi) { - /* found a scsi card */ - mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); - if (unlikely(!mca_dev)) - goto out_unlock_nomem; - - for (j = 0; j < 8; j++) - mca_dev->pos[j] = pos[j]; - - mca_configure_adapter_status(mca_dev); - /* fake POS and slot for integrated SCSI controller */ - mca_dev->pos_id = MCA_INTEGSCSI_POS; - mca_dev->slot = MCA_INTEGSCSI; - mca_dev->pos_register = which_scsi; - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - } - - /* Turn off motherboard setup */ - - outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); - - /* - * Now loop over MCA slots: put each adapter into setup mode, and - * read its POS registers. Then put adapter setup off. - */ - - for (i = 0; i < MCA_MAX_SLOT_NR; i++) { - outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG); - if (!mca_read_and_store_pos(pos)) - continue; - - mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); - if (unlikely(!mca_dev)) - goto out_unlock_nomem; - - for (j = 0; j < 8; j++) - mca_dev->pos[j] = pos[j]; - - mca_dev->driver_loaded = 0; - mca_dev->slot = i; - mca_dev->pos_register = 0; - mca_configure_adapter_status(mca_dev); - mca_register_device(MCA_PRIMARY_BUS, mca_dev); - } - outb_p(0, MCA_ADAPTER_SETUP_REG); - - /* Enable interrupts and return memory start */ - spin_unlock_irq(&mca_lock); - - for (i = 0; i < MCA_STANDARD_RESOURCES; i++) - request_resource(&ioport_resource, mca_standard_resources + i); - - mca_do_proc_init(); - - return 0; - - out_unlock_nomem: - spin_unlock_irq(&mca_lock); - out_nomem: - printk(KERN_EMERG "Failed memory allocation in MCA setup!\n"); - return -ENOMEM; -} - -subsys_initcall(mca_init); - -/*--------------------------------------------------------------------*/ - -static __kprobes void -mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag) -{ - int slot = mca_dev->slot; - - if (slot == MCA_INTEGSCSI) { - printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n", - mca_dev->name); - } else if (slot == MCA_INTEGVIDEO) { - printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n", - mca_dev->name); - } else if (slot == MCA_MOTHERBOARD) { - printk(KERN_CRIT "NMI: caused by motherboard (%s)\n", - mca_dev->name); - } - - /* More info available in POS 6 and 7? */ - - if (check_flag) { - unsigned char pos6, pos7; - - pos6 = mca_device_read_pos(mca_dev, 6); - pos7 = mca_device_read_pos(mca_dev, 7); - - printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7); - } - -} /* mca_handle_nmi_slot */ - -/*--------------------------------------------------------------------*/ - -static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data) -{ - struct mca_device *mca_dev = to_mca_device(dev); - unsigned char pos5; - - pos5 = mca_device_read_pos(mca_dev, 5); - - if (!(pos5 & 0x80)) { - /* - * Bit 7 of POS 5 is reset when this adapter has a hardware - * error. Bit 7 it reset if there's error information - * available in POS 6 and 7. - */ - mca_handle_nmi_device(mca_dev, !(pos5 & 0x40)); - return 1; - } - return 0; -} - -void __kprobes mca_handle_nmi(void) -{ - /* - * First try - scan the various adapters and see if a specific - * adapter was responsible for the error. - */ - bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback); -} |