diff options
Diffstat (limited to 'arch/x86/kernel/mmconf-fam10h_64.c')
| -rw-r--r-- | arch/x86/kernel/mmconf-fam10h_64.c | 71 |
1 files changed, 34 insertions, 37 deletions
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index 71825806cd4..ac861b8348e 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -25,7 +25,6 @@ struct pci_hostbridge_probe { }; static u64 __cpuinitdata fam10h_pci_mmconf_base; -static int __cpuinitdata fam10h_pci_mmconf_base_status; static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = { { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, @@ -44,10 +43,12 @@ static int __cpuinit cmp_range(const void *x1, const void *x2) return start1 - start2; } -/*[47:0] */ -/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */ +#define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT) +#define MMCONF_MASK (~(MMCONF_UNIT - 1)) +#define MMCONF_SIZE (MMCONF_UNIT << 8) +/* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */ #define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32) -#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32))) +#define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40)) static void __cpuinit get_fam10h_pci_mmconf_base(void) { int i; @@ -64,12 +65,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) struct range range[8]; /* only try to get setting from BSP */ - /* -1 or 1 */ - if (fam10h_pci_mmconf_base_status) + if (fam10h_pci_mmconf_base) return; if (!early_pci_allowed()) - goto fail; + return; found = 0; for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { @@ -91,7 +91,7 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) } if (!found) - goto fail; + return; /* SYS_CFG */ address = MSR_K8_SYSCFG; @@ -99,16 +99,16 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) /* TOP_MEM2 is not enabled? */ if (!(val & (1<<21))) { - tom2 = 0; + tom2 = 1ULL << 32; } else { /* TOP_MEM2 */ address = MSR_K8_TOP_MEM2; rdmsrl(address, val); - tom2 = val & (0xffffULL<<32); + tom2 = max(val & 0xffffff800000ULL, 1ULL << 32); } if (base <= tom2) - base = tom2 + (1ULL<<32); + base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK; /* * need to check if the range is in the high mmio range that is @@ -123,11 +123,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) if (!(reg & 3)) continue; - start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/ reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); - end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/ - if (!end) + if (end < tom2) continue; range[hi_mmio_num].start = start; @@ -143,32 +143,27 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void) if (range[hi_mmio_num - 1].end < base) goto out; - if (range[0].start > base) + if (range[0].start > base + MMCONF_SIZE) goto out; /* need to find one window */ - base = range[0].start - (1ULL << 32); + base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT; if ((base > tom2) && BASE_VALID(base)) goto out; - base = range[hi_mmio_num - 1].end + (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) + base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK; + if (BASE_VALID(base)) goto out; /* need to find window between ranges */ - if (hi_mmio_num > 1) - for (i = 0; i < hi_mmio_num - 1; i++) { - if (range[i + 1].start > (range[i].end + (1ULL << 32))) { - base = range[i].end + (1ULL << 32); - if ((base > tom2) && BASE_VALID(base)) - goto out; - } + for (i = 1; i < hi_mmio_num; i++) { + base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK; + val = range[i].start & MMCONF_MASK; + if (val >= base + MMCONF_SIZE && BASE_VALID(base)) + goto out; } - -fail: - fam10h_pci_mmconf_base_status = -1; return; + out: fam10h_pci_mmconf_base = base; - fam10h_pci_mmconf_base_status = 1; } void __cpuinit fam10h_check_enable_mmcfg(void) @@ -190,11 +185,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void) /* only trust the one handle 256 buses, if acpi=off */ if (!acpi_pci_disabled || busnbits >= 8) { - u64 base; - base = val & (0xffffULL << 32); - if (fam10h_pci_mmconf_base_status <= 0) { + u64 base = val & MMCONF_MASK; + + if (!fam10h_pci_mmconf_base) { fam10h_pci_mmconf_base = base; - fam10h_pci_mmconf_base_status = 1; return; } else if (fam10h_pci_mmconf_base == base) return; @@ -206,8 +200,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void) * with 256 buses */ get_fam10h_pci_mmconf_base(); - if (fam10h_pci_mmconf_base_status <= 0) + if (!fam10h_pci_mmconf_base) { + pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF; return; + } printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) | @@ -217,13 +213,13 @@ void __cpuinit fam10h_check_enable_mmcfg(void) wrmsrl(address, val); } -static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d) +static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d) { pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF; return 0; } -static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = { +static const struct dmi_system_id __initconst mmconf_dmi_table[] = { { .callback = set_check_enable_amd_mmconf, .ident = "Sun Microsystems Machine", @@ -234,7 +230,8 @@ static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = { {} }; -void __cpuinit check_enable_amd_mmconf_dmi(void) +/* Called from a __cpuinit function, but only on the BSP. */ +void __ref check_enable_amd_mmconf_dmi(void) { dmi_check_system(mmconf_dmi_table); } |