diff options
Diffstat (limited to 'arch/x86/kernel/mpparse.c')
| -rw-r--r-- | arch/x86/kernel/mpparse.c | 1105 |
1 files changed, 1105 insertions, 0 deletions
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c new file mode 100644 index 00000000000..70744e344fa --- /dev/null +++ b/arch/x86/kernel/mpparse.c @@ -0,0 +1,1105 @@ +/* + * Intel Multiprocessor Specification 1.1 and 1.4 + * compliant MP-table parsing routines. + * + * (c) 1995 Alan Cox, Building #3 <alan@redhat.com> + * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> + * (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de> + */ + +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/kernel_stat.h> +#include <linux/mc146818rtc.h> +#include <linux/bitops.h> +#include <linux/acpi.h> +#include <linux/module.h> + +#include <asm/smp.h> +#include <asm/mtrr.h> +#include <asm/mpspec.h> +#include <asm/pgalloc.h> +#include <asm/io_apic.h> +#include <asm/proto.h> +#include <asm/acpi.h> +#include <asm/bios_ebda.h> + +#include <mach_apic.h> +#ifdef CONFIG_X86_32 +#include <mach_apicdef.h> +#include <mach_mpparse.h> +#endif + +/* Have we found an MP table */ +int smp_found_config; + +/* + * Various Linux-internal data structures created from the + * MP-table. + */ +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) +int mp_bus_id_to_type[MAX_MP_BUSSES]; +#endif + +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); +int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; + +static int mp_current_pci_id; + +int pic_mode; + +/* + * Intel MP BIOS table parsing routines: + */ + +/* + * Checksum an MP configuration block. + */ + +static int __init mpf_checksum(unsigned char *mp, int len) +{ + int sum = 0; + + while (len--) + sum += *mp++; + + return sum & 0xFF; +} + +#ifdef CONFIG_X86_NUMAQ +/* + * Have to match translation table entries to main table entries by counter + * hence the mpc_record variable .... can't see a less disgusting way of + * doing this .... + */ + +static int mpc_record; +static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] + __cpuinitdata; +#endif + +static void __cpuinit MP_processor_info(struct mpc_config_processor *m) +{ + int apicid; + char *bootup_cpu = ""; + + if (!(m->mpc_cpuflag & CPU_ENABLED)) { + disabled_cpus++; + return; + } +#ifdef CONFIG_X86_NUMAQ + apicid = mpc_apic_id(m, translation_table[mpc_record]); +#else + apicid = m->mpc_apicid; +#endif + if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) { + bootup_cpu = " (Bootup-CPU)"; + boot_cpu_physical_apicid = m->mpc_apicid; + } + + printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu); + generic_processor_info(apicid, m->mpc_apicver); +} + +static void __init MP_bus_info(struct mpc_config_bus *m) +{ + char str[7]; + + memcpy(str, m->mpc_bustype, 6); + str[6] = 0; + +#ifdef CONFIG_X86_NUMAQ + mpc_oem_bus_info(m, str, translation_table[mpc_record]); +#else + Dprintk("Bus #%d is %s\n", m->mpc_busid, str); +#endif + +#if MAX_MP_BUSSES < 256 + if (m->mpc_busid >= MAX_MP_BUSSES) { + printk(KERN_WARNING "MP table busid value (%d) for bustype %s " + " is too large, max. supported is %d\n", + m->mpc_busid, str, MAX_MP_BUSSES - 1); + return; + } +#endif + + if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) { + set_bit(m->mpc_busid, mp_bus_not_pci); +#if defined(CONFIG_EISA) || defined (CONFIG_MCA) + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA; +#endif + } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) { +#ifdef CONFIG_X86_NUMAQ + mpc_oem_pci_bus(m, translation_table[mpc_record]); +#endif + clear_bit(m->mpc_busid, mp_bus_not_pci); + mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; + mp_current_pci_id++; +#if defined(CONFIG_EISA) || defined (CONFIG_MCA) + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; + } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) { + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA; + } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) { + mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA; +#endif + } else + printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); +} + +#ifdef CONFIG_X86_IO_APIC + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +static void __init MP_ioapic_info(struct mpc_config_ioapic *m) +{ + if (!(m->mpc_flags & MPC_APIC_USABLE)) + return; + + printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n", + m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr); + + if (bad_ioapic(m->mpc_apicaddr)) + return; + + mp_ioapics[nr_ioapics] = *m; + nr_ioapics++; +} + +static void __init MP_intsrc_info(struct mpc_config_intsrc *m) +{ + mp_irqs[mp_irq_entries] = *m; + Dprintk("Int: type %d, pol %d, trig %d, bus %d," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, + m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + +#endif + +static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m) +{ + Dprintk("Lint: type %d, pol %d, trig %d, bus %d," + " IRQ %02x, APIC ID %x, APIC LINT %02x\n", + m->mpc_irqtype, m->mpc_irqflag & 3, + (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid, + m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint); +} + +#ifdef CONFIG_X86_NUMAQ +static void __init MP_translation_info(struct mpc_config_translation *m) +{ + printk(KERN_INFO + "Translation: record %d, type %d, quad %d, global %d, local %d\n", + mpc_record, m->trans_type, m->trans_quad, m->trans_global, + m->trans_local); + + if (mpc_record >= MAX_MPC_ENTRY) + printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n"); + else + translation_table[mpc_record] = m; /* stash this for later */ + if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad)) + node_set_online(m->trans_quad); +} + +/* + * Read/parse the MPC oem tables + */ + +static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, + unsigned short oemsize) +{ + int count = sizeof(*oemtable); /* the header size */ + unsigned char *oemptr = ((unsigned char *)oemtable) + count; + + mpc_record = 0; + printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", + oemtable); + if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) { + printk(KERN_WARNING + "SMP mpc oemtable: bad signature [%c%c%c%c]!\n", + oemtable->oem_signature[0], oemtable->oem_signature[1], + oemtable->oem_signature[2], oemtable->oem_signature[3]); + return; + } + if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) { + printk(KERN_WARNING "SMP oem mptable: checksum error!\n"); + return; + } + while (count < oemtable->oem_length) { + switch (*oemptr) { + case MP_TRANSLATION: + { + struct mpc_config_translation *m = + (struct mpc_config_translation *)oemptr; + MP_translation_info(m); + oemptr += sizeof(*m); + count += sizeof(*m); + ++mpc_record; + break; + } + default: + { + printk(KERN_WARNING + "Unrecognised OEM table entry type! - %d\n", + (int)*oemptr); + return; + } + } + } +} + +static inline void mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid) +{ + if (strncmp(oem, "IBM NUMA", 8)) + printk("Warning! May not be a NUMA-Q system!\n"); + if (mpc->mpc_oemptr) + smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr, + mpc->mpc_oemsize); +} +#endif /* CONFIG_X86_NUMAQ */ + +/* + * Read/parse the MPC + */ + +static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) +{ + char str[16]; + char oem[10]; + int count = sizeof(*mpc); + unsigned char *mpt = ((unsigned char *)mpc) + count; + + if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) { + printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n", + mpc->mpc_signature[0], mpc->mpc_signature[1], + mpc->mpc_signature[2], mpc->mpc_signature[3]); + return 0; + } + if (mpf_checksum((unsigned char *)mpc, mpc->mpc_length)) { + printk(KERN_ERR "MPTABLE: checksum error!\n"); + return 0; + } + if (mpc->mpc_spec != 0x01 && mpc->mpc_spec != 0x04) { + printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n", + mpc->mpc_spec); + return 0; + } + if (!mpc->mpc_lapic) { + printk(KERN_ERR "MPTABLE: null local APIC address!\n"); + return 0; + } + memcpy(oem, mpc->mpc_oem, 8); + oem[8] = 0; + printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem); + + memcpy(str, mpc->mpc_productid, 12); + str[12] = 0; + printk("Product ID: %s ", str); + +#ifdef CONFIG_X86_32 + mps_oem_check(mpc, oem, str); +#endif + printk(KERN_INFO "MPTABLE: Product ID: %s ", str); + + printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic); + + /* save the local APIC address, it might be non-default */ + if (!acpi_lapic) + mp_lapic_addr = mpc->mpc_lapic; + + if (early) + return 1; + + /* + * Now process the configuration blocks. + */ +#ifdef CONFIG_X86_NUMAQ + mpc_record = 0; +#endif + while (count < mpc->mpc_length) { + switch (*mpt) { + case MP_PROCESSOR: + { + struct mpc_config_processor *m = + (struct mpc_config_processor *)mpt; + /* ACPI may have already provided this data */ + if (!acpi_lapic) + MP_processor_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_BUS: + { + struct mpc_config_bus *m = + (struct mpc_config_bus *)mpt; + MP_bus_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_IOAPIC: + { +#ifdef CONFIG_X86_IO_APIC + struct mpc_config_ioapic *m = + (struct mpc_config_ioapic *)mpt; + MP_ioapic_info(m); +#endif + mpt += sizeof(struct mpc_config_ioapic); + count += sizeof(struct mpc_config_ioapic); + break; + } + case MP_INTSRC: + { +#ifdef CONFIG_X86_IO_APIC + struct mpc_config_intsrc *m = + (struct mpc_config_intsrc *)mpt; + + MP_intsrc_info(m); +#endif + mpt += sizeof(struct mpc_config_intsrc); + count += sizeof(struct mpc_config_intsrc); + break; + } + case MP_LINTSRC: + { + struct mpc_config_lintsrc *m = + (struct mpc_config_lintsrc *)mpt; + MP_lintsrc_info(m); + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + default: + /* wrong mptable */ + printk(KERN_ERR "Your mptable is wrong, contact your HW vendor!\n"); + printk(KERN_ERR "type %x\n", *mpt); + print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16, + 1, mpc, mpc->mpc_length, 1); + count = mpc->mpc_length; + break; + } +#ifdef CONFIG_X86_NUMAQ + ++mpc_record; +#endif + } + setup_apic_routing(); + if (!num_processors) + printk(KERN_ERR "MPTABLE: no processors registered!\n"); + return num_processors; +} + +#ifdef CONFIG_X86_IO_APIC + +static int __init ELCR_trigger(unsigned int irq) +{ + unsigned int port; + + port = 0x4d0 + (irq >> 3); + return (inb(port) >> (irq & 7)) & 1; +} + +static void __init construct_default_ioirq_mptable(int mpc_default_type) +{ + struct mpc_config_intsrc intsrc; + int i; + int ELCR_fallback = 0; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqflag = 0; /* conforming */ + intsrc.mpc_srcbus = 0; + intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; + + intsrc.mpc_irqtype = mp_INT; + + /* + * If true, we have an ISA/PCI system with no IRQ entries + * in the MP table. To prevent the PCI interrupts from being set up + * incorrectly, we try to use the ELCR. The sanity check to see if + * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can + * never be level sensitive, so we simply see if the ELCR agrees. + * If it does, we assume it's valid. + */ + if (mpc_default_type == 5) { + printk(KERN_INFO "ISA/PCI bus type with no IRQ information... " + "falling back to ELCR\n"); + + if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || + ELCR_trigger(13)) + printk(KERN_ERR "ELCR contains invalid data... " + "not using ELCR\n"); + else { + printk(KERN_INFO + "Using ELCR to identify PCI interrupts\n"); + ELCR_fallback = 1; + } + } + + for (i = 0; i < 16; i++) { + switch (mpc_default_type) { + case 2: + if (i == 0 || i == 13) + continue; /* IRQ0 & IRQ13 not connected */ + /* fall through */ + default: + if (i == 2) + continue; /* IRQ2 is never connected */ + } + + if (ELCR_fallback) { + /* + * If the ELCR indicates a level-sensitive interrupt, we + * copy that information over to the MP table in the + * irqflag field (level sensitive, active high polarity). + */ + if (ELCR_trigger(i)) + intsrc.mpc_irqflag = 13; + else + intsrc.mpc_irqflag = 0; + } + + intsrc.mpc_srcbusirq = i; + intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ + MP_intsrc_info(&intsrc); + } + + intsrc.mpc_irqtype = mp_ExtINT; + intsrc.mpc_srcbusirq = 0; + intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */ + MP_intsrc_info(&intsrc); +} + +#endif + +static inline void __init construct_default_ISA_mptable(int mpc_default_type) +{ + struct mpc_config_processor processor; + struct mpc_config_bus bus; +#ifdef CONFIG_X86_IO_APIC + struct mpc_config_ioapic ioapic; +#endif + struct mpc_config_lintsrc lintsrc; + int linttypes[2] = { mp_ExtINT, mp_NMI }; + int i; + + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* + * 2 CPUs, numbered 0 & 1. + */ + processor.mpc_type = MP_PROCESSOR; + /* Either an integrated APIC or a discrete 82489DX. */ + processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + processor.mpc_cpuflag = CPU_ENABLED; + processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | + (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; + processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + for (i = 0; i < 2; i++) { + processor.mpc_apicid = i; + MP_processor_info(&processor); + } + + bus.mpc_type = MP_BUS; + bus.mpc_busid = 0; + switch (mpc_default_type) { + default: + printk(KERN_ERR "???\nUnknown standard configuration %d\n", + mpc_default_type); + /* fall through */ + case 1: + case 5: + memcpy(bus.mpc_bustype, "ISA ", 6); + break; + case 2: + case 6: + case 3: + memcpy(bus.mpc_bustype, "EISA ", 6); + break; + case 4: + case 7: + memcpy(bus.mpc_bustype, "MCA ", 6); + } + MP_bus_info(&bus); + if (mpc_default_type > 4) { + bus.mpc_busid = 1; + memcpy(bus.mpc_bustype, "PCI ", 6); + MP_bus_info(&bus); + } + +#ifdef CONFIG_X86_IO_APIC + ioapic.mpc_type = MP_IOAPIC; + ioapic.mpc_apicid = 2; + ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + ioapic.mpc_flags = MPC_APIC_USABLE; + ioapic.mpc_apicaddr = 0xFEC00000; + MP_ioapic_info(&ioapic); + + /* + * We set up most of the low 16 IO-APIC pins according to MPS rules. + */ + construct_default_ioirq_mptable(mpc_default_type); +#endif + lintsrc.mpc_type = MP_LINTSRC; + lintsrc.mpc_irqflag = 0; /* conforming */ + lintsrc.mpc_srcbusid = 0; + lintsrc.mpc_srcbusirq = 0; + lintsrc.mpc_destapic = MP_APIC_ALL; + for (i = 0; i < 2; i++) { + lintsrc.mpc_irqtype = linttypes[i]; + lintsrc.mpc_destapiclint = i; + MP_lintsrc_info(&lintsrc); + } +} + +static struct intel_mp_floating *mpf_found; + +/* + * Scan the memory blocks for an SMP configuration block. + */ +static void __init __get_smp_config(unsigned early) +{ + struct intel_mp_floating *mpf = mpf_found; + + if (acpi_lapic && early) + return; + /* + * ACPI supports both logical (e.g. Hyper-Threading) and physical + * processors, where MPS only supports physical. + */ + if (acpi_lapic && acpi_ioapic) { + printk(KERN_INFO "Using ACPI (MADT) for SMP configuration " + "information\n"); + return; + } else if (acpi_lapic) + printk(KERN_INFO "Using ACPI for processor (LAPIC) " + "configuration information\n"); + + printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", + mpf->mpf_specification); +#ifdef CONFIG_X86_32 + if (mpf->mpf_feature2 & (1 << 7)) { + printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); + pic_mode = 1; + } else { + printk(KERN_INFO " Virtual Wire compatibility mode.\n"); + pic_mode = 0; + } +#endif + /* + * Now see if we need to read further. + */ + if (mpf->mpf_feature1 != 0) { + if (early) { + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + return; + } + + printk(KERN_INFO "Default MP configuration #%d\n", + mpf->mpf_feature1); + construct_default_ISA_mptable(mpf->mpf_feature1); + + } else if (mpf->mpf_physptr) { + + /* + * Read the physical hardware table. Anything here will + * override the defaults. + */ + if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) { + smp_found_config = 0; + printk(KERN_ERR + "BIOS bug, MP table errors detected!...\n"); + printk(KERN_ERR "... disabling SMP support. " + "(tell your hw vendor)\n"); + return; + } + + if (early) + return; +#ifdef CONFIG_X86_IO_APIC + /* + * If there are no explicit MP IRQ entries, then we are + * broken. We set up most of the low 16 IO-APIC pins to + * ISA defaults and hope it will work. + */ + if (!mp_irq_entries) { + struct mpc_config_bus bus; + + printk(KERN_ERR "BIOS bug, no explicit IRQ entries, " + "using default mptable. " + "(tell your hw vendor)\n"); + + bus.mpc_type = MP_BUS; + bus.mpc_busid = 0; + memcpy(bus.mpc_bustype, "ISA ", 6); + MP_bus_info(&bus); + + construct_default_ioirq_mptable(0); + } +#endif + } else + BUG(); + + if (!early) + printk(KERN_INFO "Processors: %d\n", num_processors); + /* + * Only use the first configuration found. + */ +} + +void __init early_get_smp_config(void) +{ + __get_smp_config(1); +} + +void __init get_smp_config(void) +{ + __get_smp_config(0); +} + +static int __init smp_scan_config(unsigned long base, unsigned long length, + unsigned reserve) +{ + extern void __bad_mpf_size(void); + unsigned int *bp = phys_to_virt(base); + struct intel_mp_floating *mpf; + + Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length); + if (sizeof(*mpf) != 16) + __bad_mpf_size(); + + while (length > 0) { + mpf = (struct intel_mp_floating *)bp; + if ((*bp == SMP_MAGIC_IDENT) && + (mpf->mpf_length == 1) && + !mpf_checksum((unsigned char *)bp, 16) && + ((mpf->mpf_specification == 1) + || (mpf->mpf_specification == 4))) { + + smp_found_config = 1; + mpf_found = mpf; +#ifdef CONFIG_X86_32 + printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", + mpf, virt_to_phys(mpf)); + reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE, + BOOTMEM_DEFAULT); + if (mpf->mpf_physptr) { + /* + * We cannot access to MPC table to compute + * table size yet, as only few megabytes from + * the bottom is mapped now. + * PC-9800's MPC table places on the very last + * of physical memory; so that simply reserving + * PAGE_SIZE from mpg->mpf_physptr yields BUG() + * in reserve_bootmem. + */ + unsigned long size = PAGE_SIZE; + unsigned long end = max_low_pfn * PAGE_SIZE; + if (mpf->mpf_physptr + size > end) + size = end - mpf->mpf_physptr; + reserve_bootmem(mpf->mpf_physptr, size, + BOOTMEM_DEFAULT); + } + +#else + if (!reserve) + return 1; + + reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE); + if (mpf->mpf_physptr) + reserve_bootmem_generic(mpf->mpf_physptr, + PAGE_SIZE); +#endif + return 1; + } + bp += 4; + length -= 16; + } + return 0; +} + +static void __init __find_smp_config(unsigned reserve) +{ + unsigned int address; + + /* + * FIXME: Linux assumes you have 640K of base ram.. + * this continues the error... + * + * 1) Scan the bottom 1K for a signature + * 2) Scan the top 1K of base RAM + * 3) Scan the 64K of bios + */ + if (smp_scan_config(0x0, 0x400, reserve) || + smp_scan_config(639 * 0x400, 0x400, reserve) || + smp_scan_config(0xF0000, 0x10000, reserve)) + return; + /* + * If it is an SMP machine we should know now, unless the + * configuration is in an EISA/MCA bus machine with an + * extended bios data area. + * + * there is a real-mode segmented pointer pointing to the + * 4K EBDA area at 0x40E, calculate and scan it here. + * + * NOTE! There are Linux loaders that will corrupt the EBDA + * area, and as such this kind of SMP config may be less + * trustworthy, simply because the SMP table may have been + * stomped on during early boot. These loaders are buggy and + * should be fixed. + * + * MP1.4 SPEC states to only scan first 1K of 4K EBDA. + */ + + address = get_bios_ebda(); + if (address) + smp_scan_config(address, 0x400, reserve); +} + +void __init early_find_smp_config(void) +{ + __find_smp_config(0); +} + +void __init find_smp_config(void) +{ + __find_smp_config(1); +} + +/* -------------------------------------------------------------------------- + ACPI-based MP Configuration + -------------------------------------------------------------------------- */ + +#ifdef CONFIG_ACPI + +#ifdef CONFIG_X86_IO_APIC + +#define MP_ISA_BUS 0 +#define MP_MAX_IOAPIC_PIN 127 + +extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; + +static int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_ioapic_routing[i].gsi_base) + && (gsi <= mp_ioapic_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +static u8 uniq_ioapic_id(u8 id) +{ +#ifdef CONFIG_X86_32 + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(nr_ioapics, id); + else + return id; +#else + int i; + DECLARE_BITMAP(used, 256); + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mpc_apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +#endif +} + +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].mpc_type = MP_IOAPIC; + mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mpc_apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); +#ifdef CONFIG_X86_32 + mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); +#else + mp_ioapics[idx].mpc_apicver = 0; +#endif + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].gsi_base = gsi_base; + mp_ioapic_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, + mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); + + nr_ioapics++; +} + +void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) +{ + struct mpc_config_intsrc intsrc; + int ioapic = -1; + int pin = -1; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_irqflag = (trigger << 2) | polarity; + intsrc.mpc_srcbus = MP_ISA_BUS; + intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ + intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + intsrc.mpc_dstirq = pin; /* INTIN# */ + + Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", + intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, + (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, + intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq); + + mp_irqs[mp_irq_entries] = intsrc; + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!\n"); +} + +int es7000_plat; + +void __init mp_config_acpi_legacy_irqs(void) +{ + struct mpc_config_intsrc intsrc; + int i = 0; + int ioapic = -1; + +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) + /* + * Fabricate the legacy ISA bus (bus #31). + */ + mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; +#endif + set_bit(MP_ISA_BUS, mp_bus_not_pci); + Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); + + /* + * Older generations of ES7000 have no legacy identity mappings + */ + if (es7000_plat == 1) + return; + + /* + * Locate the IOAPIC that manages the ISA IRQs (0-15). + */ + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + return; + + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqflag = 0; /* Conforming */ + intsrc.mpc_srcbus = MP_ISA_BUS; +#ifdef CONFIG_X86_IO_APIC + intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; +#endif + /* + * Use the default configuration for the IRQs 0-15. Unless + * overridden by (MADT) interrupt source override entries. + */ + for (i = 0; i < 16; i++) { + int idx; + + for (idx = 0; idx < mp_irq_entries; idx++) { + struct mpc_config_intsrc *irq = mp_irqs + idx; + + /* Do we already have a mapping for this ISA IRQ? */ + if (irq->mpc_srcbus == MP_ISA_BUS + && irq->mpc_srcbusirq == i) + break; + + /* Do we already have a mapping for this IOAPIC pin */ + if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && + (irq->mpc_dstirq == i)) + break; + } + + if (idx != mp_irq_entries) { + printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); + continue; /* IRQ already used */ + } + + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_srcbusirq = i; /* Identity mapped */ + intsrc.mpc_dstirq = i; + + Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, " + "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, + (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, + intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, + intsrc.mpc_dstirq); + + mp_irqs[mp_irq_entries] = intsrc; + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!\n"); + } +} + +int mp_register_gsi(u32 gsi, int triggering, int polarity) +{ + int ioapic = -1; + int ioapic_pin = 0; + int idx, bit = 0; +#ifdef CONFIG_X86_32 +#define MAX_GSI_NUM 4096 +#define IRQ_COMPRESSION_START 64 + + static int pci_irq = IRQ_COMPRESSION_START; + /* + * Mapping between Global System Interrupts, which + * represent all possible interrupts, and IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; +#else + + if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) + return gsi; +#endif + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + +#ifdef CONFIG_X86_32 + if (ioapic_renumber_irq) + gsi = ioapic_renumber_irq(ioapic, gsi); +#endif + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + bit = ioapic_pin % 32; + idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32); + if (idx > 3) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + ioapic_pin); + return gsi; + } + if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) { + Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", + mp_ioapic_routing[ioapic].apic_id, ioapic_pin); +#ifdef CONFIG_X86_32 + return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); +#else + return gsi; +#endif + } + + mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit); +#ifdef CONFIG_X86_32 + /* + * For GSI >= 64, use IRQ compression + */ + if ((gsi >= IRQ_COMPRESSION_START) + && (triggering == ACPI_LEVEL_SENSITIVE)) { + /* + * For PCI devices assign IRQs in order, avoiding gaps + * due to unused I/O APIC pins. + */ + int irq = gsi; + if (gsi < MAX_GSI_NUM) { + /* + * Retain the VIA chipset work-around (gsi > 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + gsi = pci_irq++; + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_gbl_FADT.sci_interrupt) + gsi = pci_irq++; + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } +#endif + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; +} + +#endif /* CONFIG_X86_IO_APIC */ +#endif /* CONFIG_ACPI */ |