diff options
Diffstat (limited to 'arch/x86/kernel/olpc-xo1.c')
| -rw-r--r-- | arch/x86/kernel/olpc-xo1.c | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/arch/x86/kernel/olpc-xo1.c b/arch/x86/kernel/olpc-xo1.c new file mode 100644 index 00000000000..f5442c03abc --- /dev/null +++ b/arch/x86/kernel/olpc-xo1.c @@ -0,0 +1,140 @@ +/* + * Support for features of the OLPC XO-1 laptop + * + * Copyright (C) 2010 One Laptop per Child + * Copyright (C) 2006 Red Hat, Inc. + * Copyright (C) 2006 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/platform_device.h> +#include <linux/pm.h> + +#include <asm/io.h> +#include <asm/olpc.h> + +#define DRV_NAME "olpc-xo1" + +#define PMS_BAR 4 +#define ACPI_BAR 5 + +/* PMC registers (PMS block) */ +#define PM_SCLK 0x10 +#define PM_IN_SLPCTL 0x20 +#define PM_WKXD 0x34 +#define PM_WKD 0x30 +#define PM_SSC 0x54 + +/* PM registers (ACPI block) */ +#define PM1_CNT 0x08 +#define PM_GPE0_STS 0x18 + +static unsigned long acpi_base; +static unsigned long pms_base; + +static void xo1_power_off(void) +{ + printk(KERN_INFO "OLPC XO-1 power off sequence...\n"); + + /* Enable all of these controls with 0 delay */ + outl(0x40000000, pms_base + PM_SCLK); + outl(0x40000000, pms_base + PM_IN_SLPCTL); + outl(0x40000000, pms_base + PM_WKXD); + outl(0x40000000, pms_base + PM_WKD); + + /* Clear status bits (possibly unnecessary) */ + outl(0x0002ffff, pms_base + PM_SSC); + outl(0xffffffff, acpi_base + PM_GPE0_STS); + + /* Write SLP_EN bit to start the machinery */ + outl(0x00002000, acpi_base + PM1_CNT); +} + +/* Read the base addresses from the PCI BAR info */ +static int __devinit setup_bases(struct pci_dev *pdev) +{ + int r; + + r = pci_enable_device_io(pdev); + if (r) { + dev_err(&pdev->dev, "can't enable device IO\n"); + return r; + } + + r = pci_request_region(pdev, ACPI_BAR, DRV_NAME); + if (r) { + dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", ACPI_BAR); + return r; + } + + r = pci_request_region(pdev, PMS_BAR, DRV_NAME); + if (r) { + dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", PMS_BAR); + pci_release_region(pdev, ACPI_BAR); + return r; + } + + acpi_base = pci_resource_start(pdev, ACPI_BAR); + pms_base = pci_resource_start(pdev, PMS_BAR); + + return 0; +} + +static int __devinit olpc_xo1_probe(struct platform_device *pdev) +{ + struct pci_dev *pcidev; + int r; + + pcidev = pci_get_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, + NULL); + if (!pdev) + return -ENODEV; + + r = setup_bases(pcidev); + if (r) + return r; + + pm_power_off = xo1_power_off; + + printk(KERN_INFO "OLPC XO-1 support registered\n"); + return 0; +} + +static int __devexit olpc_xo1_remove(struct platform_device *pdev) +{ + pm_power_off = NULL; + return 0; +} + +static struct platform_driver olpc_xo1_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = olpc_xo1_probe, + .remove = __devexit_p(olpc_xo1_remove), +}; + +static int __init olpc_xo1_init(void) +{ + return platform_driver_register(&olpc_xo1_driver); +} + +static void __exit olpc_xo1_exit(void) +{ + platform_driver_unregister(&olpc_xo1_driver); +} + +MODULE_AUTHOR("Daniel Drake <dsd@laptop.org>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:olpc-xo1"); + +module_init(olpc_xo1_init); +module_exit(olpc_xo1_exit); |