diff options
Diffstat (limited to 'arch/x86/kernel/ptrace.c')
-rw-r--r-- | arch/x86/kernel/ptrace.c | 182 |
1 files changed, 125 insertions, 57 deletions
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 267cb85b479..e79610d9597 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -22,6 +22,8 @@ #include <linux/seccomp.h> #include <linux/signal.h> #include <linux/workqueue.h> +#include <linux/perf_event.h> +#include <linux/hw_breakpoint.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -441,54 +443,59 @@ static int genregs_set(struct task_struct *target, return ret; } -/* - * Decode the length and type bits for a particular breakpoint as - * stored in debug register 7. Return the "enabled" status. - */ -static int decode_dr7(unsigned long dr7, int bpnum, unsigned *len, - unsigned *type) -{ - int bp_info = dr7 >> (DR_CONTROL_SHIFT + bpnum * DR_CONTROL_SIZE); - - *len = (bp_info & 0xc) | 0x40; - *type = (bp_info & 0x3) | 0x80; - return (dr7 >> (bpnum * DR_ENABLE_SIZE)) & 0x3; -} - -static void ptrace_triggered(struct hw_breakpoint *bp, struct pt_regs *regs) +static void ptrace_triggered(struct perf_event *bp, void *data) { - struct thread_struct *thread = &(current->thread); int i; + struct thread_struct *thread = &(current->thread); /* * Store in the virtual DR6 register the fact that the breakpoint * was hit so the thread's debugger will see it. */ - for (i = 0; i < hbp_kernel_pos; i++) - /* - * We will check bp->info.address against the address stored in - * thread's hbp structure and not debugreg[i]. This is to ensure - * that the corresponding bit for 'i' in DR7 register is enabled - */ - if (bp->info.address == thread->hbp[i]->info.address) + for (i = 0; i < HBP_NUM; i++) { + if (thread->ptrace_bps[i] == bp) break; + } thread->debugreg6 |= (DR_TRAP0 << i); } /* + * Walk through every ptrace breakpoints for this thread and + * build the dr7 value on top of their attributes. + * + */ +static unsigned long ptrace_get_dr7(struct perf_event *bp[]) +{ + int i; + int dr7 = 0; + struct arch_hw_breakpoint *info; + + for (i = 0; i < HBP_NUM; i++) { + if (bp[i] && !bp[i]->attr.disabled) { + info = counter_arch_bp(bp[i]); + dr7 |= encode_dr7(i, info->len, info->type); + } + } + + return dr7; +} + +/* * Handle ptrace writes to debug register 7. */ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data) { struct thread_struct *thread = &(tsk->thread); - unsigned long old_dr7 = thread->debugreg7; + unsigned long old_dr7; int i, orig_ret = 0, rc = 0; int enabled, second_pass = 0; unsigned len, type; - struct hw_breakpoint *bp; + int gen_len, gen_type; + struct perf_event *bp; data &= ~DR_CONTROL_RESERVED; + old_dr7 = ptrace_get_dr7(thread->ptrace_bps); restore: /* * Loop through all the hardware breakpoints, making the @@ -496,11 +503,12 @@ restore: */ for (i = 0; i < HBP_NUM; i++) { enabled = decode_dr7(data, i, &len, &type); - bp = thread->hbp[i]; + bp = thread->ptrace_bps[i]; if (!enabled) { if (bp) { - /* Don't unregister the breakpoints right-away, + /* + * Don't unregister the breakpoints right-away, * unless all register_user_hw_breakpoint() * requests have succeeded. This prevents * any window of opportunity for debug @@ -508,27 +516,45 @@ restore: */ if (!second_pass) continue; - unregister_user_hw_breakpoint(tsk, bp); - kfree(bp); + thread->ptrace_bps[i] = NULL; + unregister_hw_breakpoint(bp); } continue; } + + /* + * We shoud have at least an inactive breakpoint at this + * slot. It means the user is writing dr7 without having + * written the address register first + */ if (!bp) { - rc = -ENOMEM; - bp = kzalloc(sizeof(struct hw_breakpoint), GFP_KERNEL); - if (bp) { - bp->info.address = thread->debugreg[i]; - bp->triggered = ptrace_triggered; - bp->info.len = len; - bp->info.type = type; - rc = register_user_hw_breakpoint(tsk, bp); - if (rc) - kfree(bp); - } - } else - rc = modify_user_hw_breakpoint(tsk, bp); + rc = -EINVAL; + break; + } + + rc = arch_bp_generic_fields(len, type, &gen_len, &gen_type); if (rc) break; + + /* + * This is a temporary thing as bp is unregistered/registered + * to simulate modification + */ + bp = modify_user_hw_breakpoint(bp, bp->attr.bp_addr, gen_len, + gen_type, bp->callback, + tsk, true); + thread->ptrace_bps[i] = NULL; + + if (!bp) { /* incorrect bp, or we have a bug in bp API */ + rc = -EINVAL; + break; + } + if (IS_ERR(bp)) { + rc = PTR_ERR(bp); + bp = NULL; + break; + } + thread->ptrace_bps[i] = bp; } /* * Make a second pass to free the remaining unused breakpoints @@ -553,15 +579,63 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n) struct thread_struct *thread = &(tsk->thread); unsigned long val = 0; - if (n < HBP_NUM) - val = thread->debugreg[n]; - else if (n == 6) + if (n < HBP_NUM) { + struct perf_event *bp; + bp = thread->ptrace_bps[n]; + if (!bp) + return 0; + val = bp->hw.info.address; + } else if (n == 6) { val = thread->debugreg6; - else if (n == 7) - val = thread->debugreg7; + } else if (n == 7) { + val = ptrace_get_dr7(thread->ptrace_bps); + } return val; } +static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, + unsigned long addr) +{ + struct perf_event *bp; + struct thread_struct *t = &tsk->thread; + + if (!t->ptrace_bps[nr]) { + /* + * Put stub len and type to register (reserve) an inactive but + * correct bp + */ + bp = register_user_hw_breakpoint(addr, HW_BREAKPOINT_LEN_1, + HW_BREAKPOINT_W, + ptrace_triggered, tsk, + false); + } else { + bp = t->ptrace_bps[nr]; + t->ptrace_bps[nr] = NULL; + bp = modify_user_hw_breakpoint(bp, addr, bp->attr.bp_len, + bp->attr.bp_type, + bp->callback, + tsk, + bp->attr.disabled); + } + + if (!bp) + return -EIO; + /* + * CHECKME: the previous code returned -EIO if the addr wasn't a + * valid task virtual addr. The new one will return -EINVAL in this + * case. + * -EINVAL may be what we want for in-kernel breakpoints users, but + * -EIO looks better for ptrace, since we refuse a register writing + * for the user. And anyway this is the previous behaviour. + */ + if (IS_ERR(bp)) + return PTR_ERR(bp); + + t->ptrace_bps[nr] = bp; + + return 0; +} + /* * Handle PTRACE_POKEUSR calls for the debug register area. */ @@ -575,19 +649,13 @@ int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val) return -EIO; if (n == 6) { - tsk->thread.debugreg6 = val; + thread->debugreg6 = val; goto ret_path; } if (n < HBP_NUM) { - if (thread->hbp[n]) { - if (arch_check_va_in_userspace(val, - thread->hbp[n]->info.len) == 0) { - rc = -EIO; - goto ret_path; - } - thread->hbp[n]->info.address = val; - } - thread->debugreg[n] = val; + rc = ptrace_set_breakpoint_addr(tsk, n, val); + if (rc) + return rc; } /* All that's left is DR7 */ if (n == 7) |