diff options
Diffstat (limited to 'arch/x86/kernel/reboot.c')
| -rw-r--r-- | arch/x86/kernel/reboot.c | 141 |
1 files changed, 133 insertions, 8 deletions
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f4c93f1cfc1..61f718df6ee 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -21,6 +21,9 @@ # include <asm/iommu.h> #endif +#include <mach_ipi.h> + + /* * Power off function, if any */ @@ -29,18 +32,17 @@ EXPORT_SYMBOL(pm_power_off); static const struct desc_ptr no_idt = {}; static int reboot_mode; -/* - * Keyboard reset and triple fault may result in INIT, not RESET, which - * doesn't work when we're in vmx root mode. Try ACPI first. - */ -enum reboot_type reboot_type = BOOT_ACPI; +enum reboot_type reboot_type = BOOT_KBD; int reboot_force; #if defined(CONFIG_X86_32) && defined(CONFIG_SMP) static int reboot_cpu = -1; #endif -/* reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] +/* This is set by the PCI code if either type 1 or type 2 PCI is detected */ +bool port_cf9_safe = false; + +/* reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci] warm Don't set the cold reboot flag cold Set the cold reboot flag bios Reboot by jumping through the BIOS (only for X86_32) @@ -49,6 +51,7 @@ static int reboot_cpu = -1; kbd Use the keyboard controller. cold reset (default) acpi Use the RESET_REG in the FADT efi Use efi reset_system runtime service + pci Use the so-called "PCI reset register", CF9 force Avoid anything that could hang. */ static int __init reboot_setup(char *str) @@ -83,6 +86,7 @@ static int __init reboot_setup(char *str) case 'k': case 't': case 'e': + case 'p': reboot_type = *str; break; @@ -173,6 +177,15 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "0KW626"), }, }, + { /* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */ + .callback = set_bios_reboot, + .ident = "Dell OptiPlex 330", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 330"), + DMI_MATCH(DMI_BOARD_NAME, "0KP561"), + }, + }, { /* Handle problems with rebooting on Dell 2400's */ .callback = set_bios_reboot, .ident = "Dell PowerEdge 2400", @@ -399,12 +412,27 @@ static void native_machine_emergency_restart(void) reboot_type = BOOT_KBD; break; - case BOOT_EFI: if (efi_enabled) - efi.reset_system(reboot_mode ? EFI_RESET_WARM : EFI_RESET_COLD, + efi.reset_system(reboot_mode ? + EFI_RESET_WARM : + EFI_RESET_COLD, EFI_SUCCESS, 0, NULL); + reboot_type = BOOT_KBD; + break; + + case BOOT_CF9: + port_cf9_safe = true; + /* fall through */ + case BOOT_CF9_COND: + if (port_cf9_safe) { + u8 cf9 = inb(0xcf9) & ~6; + outb(cf9|2, 0xcf9); /* Request hard reset */ + udelay(50); + outb(cf9|6, 0xcf9); /* Actually do the reset */ + udelay(50); + } reboot_type = BOOT_KBD; break; } @@ -465,6 +493,11 @@ static void native_machine_restart(char *__unused) static void native_machine_halt(void) { + /* stop other cpus and apics */ + machine_shutdown(); + + /* stop this cpu */ + stop_this_cpu(NULL); } static void native_machine_power_off(void) @@ -518,3 +551,95 @@ void machine_crash_shutdown(struct pt_regs *regs) machine_ops.crash_shutdown(regs); } #endif + + +#if defined(CONFIG_SMP) + +/* This keeps a track of which one is crashing cpu. */ +static int crashing_cpu; +static nmi_shootdown_cb shootdown_callback; + +static atomic_t waiting_for_crash_ipi; + +static int crash_nmi_callback(struct notifier_block *self, + unsigned long val, void *data) +{ + int cpu; + + if (val != DIE_NMI_IPI) + return NOTIFY_OK; + + cpu = raw_smp_processor_id(); + + /* Don't do anything if this handler is invoked on crashing cpu. + * Otherwise, system will completely hang. Crashing cpu can get + * an NMI if system was initially booted with nmi_watchdog parameter. + */ + if (cpu == crashing_cpu) + return NOTIFY_STOP; + local_irq_disable(); + + shootdown_callback(cpu, (struct die_args *)data); + + atomic_dec(&waiting_for_crash_ipi); + /* Assume hlt works */ + halt(); + for (;;) + cpu_relax(); + + return 1; +} + +static void smp_send_nmi_allbutself(void) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(safe_smp_processor_id(), mask); + if (!cpus_empty(mask)) + send_IPI_mask(mask, NMI_VECTOR); +} + +static struct notifier_block crash_nmi_nb = { + .notifier_call = crash_nmi_callback, +}; + +/* Halt all other CPUs, calling the specified function on each of them + * + * This function can be used to halt all other CPUs on crash + * or emergency reboot time. The function passed as parameter + * will be called inside a NMI handler on all CPUs. + */ +void nmi_shootdown_cpus(nmi_shootdown_cb callback) +{ + unsigned long msecs; + local_irq_disable(); + + /* Make a note of crashing cpu. Will be used in NMI callback.*/ + crashing_cpu = safe_smp_processor_id(); + + shootdown_callback = callback; + + atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1); + /* Would it be better to replace the trap vector here? */ + if (register_die_notifier(&crash_nmi_nb)) + return; /* return what? */ + /* Ensure the new callback function is set before sending + * out the NMI + */ + wmb(); + + smp_send_nmi_allbutself(); + + msecs = 1000; /* Wait at most a second for the other cpus to stop */ + while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) { + mdelay(1); + msecs--; + } + + /* Leave the nmi callback set */ +} +#else /* !CONFIG_SMP */ +void nmi_shootdown_cpus(nmi_shootdown_cb callback) +{ + /* No other CPUs to shoot down */ +} +#endif |