diff options
Diffstat (limited to 'arch/x86/kernel/relocate_kernel_64.S')
| -rw-r--r-- | arch/x86/kernel/relocate_kernel_64.S | 312 |
1 files changed, 156 insertions, 156 deletions
diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S index f5afe665a82..4de8f5b3d47 100644 --- a/arch/x86/kernel/relocate_kernel_64.S +++ b/arch/x86/kernel/relocate_kernel_64.S @@ -7,10 +7,10 @@ */ #include <linux/linkage.h> -#include <asm/page.h> +#include <asm/page_types.h> #include <asm/kexec.h> #include <asm/processor-flags.h> -#include <asm/pgtable.h> +#include <asm/pgtable_types.h> /* * Must be relocatable PIC code callable as a C function @@ -19,145 +19,76 @@ #define PTR(x) (x << 3) #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) +/* + * control_page + KEXEC_CONTROL_CODE_MAX_SIZE + * ~ control_page + PAGE_SIZE are used as data storage and stack for + * jumping back + */ +#define DATA(offset) (KEXEC_CONTROL_CODE_MAX_SIZE+(offset)) + +/* Minimal CPU state */ +#define RSP DATA(0x0) +#define CR0 DATA(0x8) +#define CR3 DATA(0x10) +#define CR4 DATA(0x18) + +/* other data */ +#define CP_PA_TABLE_PAGE DATA(0x20) +#define CP_PA_SWAP_PAGE DATA(0x28) +#define CP_PA_BACKUP_PAGES_MAP DATA(0x30) + .text .align PAGE_SIZE .code64 .globl relocate_kernel relocate_kernel: - /* %rdi indirection_page + /* + * %rdi indirection_page * %rsi page_list * %rdx start address + * %rcx preserve_context */ - /* map the control page at its virtual address */ - - movq $0x0000ff8000000000, %r10 /* mask */ - mov $(39 - 3), %cl /* bits to shift */ - movq PTR(VA_CONTROL_PAGE)(%rsi), %r11 /* address to map */ - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PGD)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PUD_0)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PUD_0)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PMD_0)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PMD_0)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PTE_0)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PTE_0)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - /* identity map the control page at its physical address */ - - movq $0x0000ff8000000000, %r10 /* mask */ - mov $(39 - 3), %cl /* bits to shift */ - movq PTR(PA_CONTROL_PAGE)(%rsi), %r11 /* address to map */ - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PGD)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PUD_1)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PUD_1)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PMD_1)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PMD_1)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_PTE_1)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - - shrq $9, %r10 - sub $9, %cl - - movq %r11, %r9 - andq %r10, %r9 - shrq %cl, %r9 - - movq PTR(VA_PTE_1)(%rsi), %r8 - addq %r8, %r9 - movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 - orq $PAGE_ATTR, %r8 - movq %r8, (%r9) - -relocate_new_kernel: - /* %rdi indirection_page - * %rsi page_list - * %rdx start address - */ + /* Save the CPU context, used for jumping back */ + pushq %rbx + pushq %rbp + pushq %r12 + pushq %r13 + pushq %r14 + pushq %r15 + pushf + + movq PTR(VA_CONTROL_PAGE)(%rsi), %r11 + movq %rsp, RSP(%r11) + movq %cr0, %rax + movq %rax, CR0(%r11) + movq %cr3, %rax + movq %rax, CR3(%r11) + movq %cr4, %rax + movq %rax, CR4(%r11) /* zero out flags, and disable interrupts */ pushq $0 popfq - /* get physical address of control page now */ - /* this is impossible after page table switch */ + /* + * get physical address of control page now + * this is impossible after page table switch + */ movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 /* get physical address of page table now too */ - movq PTR(PA_TABLE_PAGE)(%rsi), %rcx + movq PTR(PA_TABLE_PAGE)(%rsi), %r9 + + /* get physical address of swap page now */ + movq PTR(PA_SWAP_PAGE)(%rsi), %r10 - /* switch to new set of page tables */ - movq PTR(PA_PGD)(%rsi), %r9 + /* save some information for jumping back */ + movq %r9, CP_PA_TABLE_PAGE(%r11) + movq %r10, CP_PA_SWAP_PAGE(%r11) + movq %rdi, CP_PA_BACKUP_PAGES_MAP(%r11) + + /* Switch to the identity mapped page tables */ movq %r9, %cr3 /* setup a new stack at the end of the physical control page */ @@ -172,7 +103,8 @@ identity_mapped: /* store the start address on the stack */ pushq %rdx - /* Set cr0 to a known state: + /* + * Set cr0 to a known state: * - Paging enabled * - Alignment check disabled * - Write protect disabled @@ -185,7 +117,8 @@ identity_mapped: orl $(X86_CR0_PG | X86_CR0_PE), %eax movq %rax, %cr0 - /* Set cr4 to a known state: + /* + * Set cr4 to a known state: * - physical address extension enabled */ movq $X86_CR4_PAE, %rax @@ -194,12 +127,88 @@ identity_mapped: jmp 1f 1: - /* Switch to the identity mapped page tables, - * and flush the TLB. - */ - movq %rcx, %cr3 + /* Flush the TLB (needed?) */ + movq %r9, %cr3 + + movq %rcx, %r11 + call swap_pages + + /* + * To be certain of avoiding problems with self-modifying code + * I need to execute a serializing instruction here. + * So I flush the TLB by reloading %cr3 here, it's handy, + * and not processor dependent. + */ + movq %cr3, %rax + movq %rax, %cr3 + + /* + * set all of the registers to known values + * leave %rsp alone + */ + + testq %r11, %r11 + jnz 1f + xorq %rax, %rax + xorq %rbx, %rbx + xorq %rcx, %rcx + xorq %rdx, %rdx + xorq %rsi, %rsi + xorq %rdi, %rdi + xorq %rbp, %rbp + xorq %r8, %r8 + xorq %r9, %r9 + xorq %r10, %r9 + xorq %r11, %r11 + xorq %r12, %r12 + xorq %r13, %r13 + xorq %r14, %r14 + xorq %r15, %r15 + + ret + +1: + popq %rdx + leaq PAGE_SIZE(%r10), %rsp + call *%rdx + + /* get the re-entry point of the peer system */ + movq 0(%rsp), %rbp + call 1f +1: + popq %r8 + subq $(1b - relocate_kernel), %r8 + movq CP_PA_SWAP_PAGE(%r8), %r10 + movq CP_PA_BACKUP_PAGES_MAP(%r8), %rdi + movq CP_PA_TABLE_PAGE(%r8), %rax + movq %rax, %cr3 + lea PAGE_SIZE(%r8), %rsp + call swap_pages + movq $virtual_mapped, %rax + pushq %rax + ret + +virtual_mapped: + movq RSP(%r8), %rsp + movq CR4(%r8), %rax + movq %rax, %cr4 + movq CR3(%r8), %rax + movq CR0(%r8), %r8 + movq %rax, %cr3 + movq %r8, %cr0 + movq %rbp, %rax + + popf + popq %r15 + popq %r14 + popq %r13 + popq %r12 + popq %rbp + popq %rbx + ret /* Do the copies */ +swap_pages: movq %rdi, %rcx /* Put the page_list in %rcx */ xorq %rdi, %rdi xorq %rsi, %rsi @@ -231,36 +240,27 @@ identity_mapped: movq %rcx, %rsi /* For ever source page do a copy */ andq $0xfffffffffffff000, %rsi + movq %rdi, %rdx + movq %rsi, %rax + + movq %r10, %rdi movq $512, %rcx rep ; movsq - jmp 0b -3: - - /* To be certain of avoiding problems with self-modifying code - * I need to execute a serializing instruction here. - * So I flush the TLB by reloading %cr3 here, it's handy, - * and not processor dependent. - */ - movq %cr3, %rax - movq %rax, %cr3 - /* set all of the registers to known values */ - /* leave %rsp alone */ + movq %rax, %rdi + movq %rdx, %rsi + movq $512, %rcx + rep ; movsq - xorq %rax, %rax - xorq %rbx, %rbx - xorq %rcx, %rcx - xorq %rdx, %rdx - xorq %rsi, %rsi - xorq %rdi, %rdi - xorq %rbp, %rbp - xorq %r8, %r8 - xorq %r9, %r9 - xorq %r10, %r9 - xorq %r11, %r11 - xorq %r12, %r12 - xorq %r13, %r13 - xorq %r14, %r14 - xorq %r15, %r15 + movq %rdx, %rdi + movq %r10, %rsi + movq $512, %rcx + rep ; movsq + lea PAGE_SIZE(%rax), %rsi + jmp 0b +3: ret + + .globl kexec_control_code_size +.set kexec_control_code_size, . - relocate_kernel |