diff options
Diffstat (limited to 'arch/x86/kernel/setup.c')
| -rw-r--r-- | arch/x86/kernel/setup.c | 245 |
1 files changed, 230 insertions, 15 deletions
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index a4656adab53..2255782e8d4 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -223,6 +223,9 @@ unsigned long saved_video_mode; #define RAMDISK_LOAD_FLAG 0x4000 static char __initdata command_line[COMMAND_LINE_SIZE]; +#ifdef CONFIG_CMDLINE_BOOL +static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +#endif #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) struct edd edd; @@ -299,7 +302,7 @@ static void __init relocate_initrd(void) if (clen > MAX_MAP_CHUNK-slop) clen = MAX_MAP_CHUNK-slop; mapaddr = ramdisk_image & PAGE_MASK; - p = early_ioremap(mapaddr, clen+slop); + p = early_memremap(mapaddr, clen+slop); memcpy(q, p+slop, clen); early_iounmap(p, clen+slop); q += clen; @@ -376,7 +379,7 @@ static void __init parse_setup_data(void) return; pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = early_ioremap(pa_data, PAGE_SIZE); + data = early_memremap(pa_data, PAGE_SIZE); switch (data->type) { case SETUP_E820_EXT: parse_e820_ext(data, pa_data); @@ -399,7 +402,7 @@ static void __init e820_reserve_setup_data(void) return; pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = early_ioremap(pa_data, sizeof(*data)); + data = early_memremap(pa_data, sizeof(*data)); e820_update_range(pa_data, sizeof(*data)+data->len, E820_RAM, E820_RESERVED_KERN); found = 1; @@ -425,7 +428,7 @@ static void __init reserve_early_setup_data(void) return; pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = early_ioremap(pa_data, sizeof(*data)); + data = early_memremap(pa_data, sizeof(*data)); sprintf(buf, "setup data %x", data->type); reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf); pa_data = data->next; @@ -579,6 +582,190 @@ static struct x86_quirks default_x86_quirks __initdata; struct x86_quirks *x86_quirks __initdata = &default_x86_quirks; /* + * Some BIOSes seem to corrupt the low 64k of memory during events + * like suspend/resume and unplugging an HDMI cable. Reserve all + * remaining free memory in that area and fill it with a distinct + * pattern. + */ +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION +#define MAX_SCAN_AREAS 8 + +static int __read_mostly memory_corruption_check = -1; + +static unsigned __read_mostly corruption_check_size = 64*1024; +static unsigned __read_mostly corruption_check_period = 60; /* seconds */ + +static struct e820entry scan_areas[MAX_SCAN_AREAS]; +static int num_scan_areas; + + +static int set_corruption_check(char *arg) +{ + char *end; + + memory_corruption_check = simple_strtol(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("memory_corruption_check", set_corruption_check); + +static int set_corruption_check_period(char *arg) +{ + char *end; + + corruption_check_period = simple_strtoul(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("memory_corruption_check_period", set_corruption_check_period); + +static int set_corruption_check_size(char *arg) +{ + char *end; + unsigned size; + + size = memparse(arg, &end); + + if (*end == '\0') + corruption_check_size = size; + + return (size == corruption_check_size) ? 0 : -EINVAL; +} +early_param("memory_corruption_check_size", set_corruption_check_size); + + +static void __init setup_bios_corruption_check(void) +{ + u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */ + + if (memory_corruption_check == -1) { + memory_corruption_check = +#ifdef CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK + 1 +#else + 0 +#endif + ; + } + + if (corruption_check_size == 0) + memory_corruption_check = 0; + + if (!memory_corruption_check) + return; + + corruption_check_size = round_up(corruption_check_size, PAGE_SIZE); + + while(addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) { + u64 size; + addr = find_e820_area_size(addr, &size, PAGE_SIZE); + + if (addr == 0) + break; + + if ((addr + size) > corruption_check_size) + size = corruption_check_size - addr; + + if (size == 0) + break; + + e820_update_range(addr, size, E820_RAM, E820_RESERVED); + scan_areas[num_scan_areas].addr = addr; + scan_areas[num_scan_areas].size = size; + num_scan_areas++; + + /* Assume we've already mapped this early memory */ + memset(__va(addr), 0, size); + + addr += size; + } + + printk(KERN_INFO "Scanning %d areas for low memory corruption\n", + num_scan_areas); + update_e820(); +} + +static struct timer_list periodic_check_timer; + +void check_for_bios_corruption(void) +{ + int i; + int corruption = 0; + + if (!memory_corruption_check) + return; + + for(i = 0; i < num_scan_areas; i++) { + unsigned long *addr = __va(scan_areas[i].addr); + unsigned long size = scan_areas[i].size; + + for(; size; addr++, size -= sizeof(unsigned long)) { + if (!*addr) + continue; + printk(KERN_ERR "Corrupted low memory at %p (%lx phys) = %08lx\n", + addr, __pa(addr), *addr); + corruption = 1; + *addr = 0; + } + } + + WARN(corruption, KERN_ERR "Memory corruption detected in low memory\n"); +} + +static void periodic_check_for_corruption(unsigned long data) +{ + check_for_bios_corruption(); + mod_timer(&periodic_check_timer, round_jiffies(jiffies + corruption_check_period*HZ)); +} + +void start_periodic_check_for_corruption(void) +{ + if (!memory_corruption_check || corruption_check_period == 0) + return; + + printk(KERN_INFO "Scanning for low memory corruption every %d seconds\n", + corruption_check_period); + + init_timer(&periodic_check_timer); + periodic_check_timer.function = &periodic_check_for_corruption; + periodic_check_for_corruption(0); +} +#endif + +static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE + "%s detected: BIOS may corrupt low RAM, working it around.\n", + d->ident); + + e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED); + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + + return 0; +} + +/* List of systems that have known low memory corruption BIOS problems */ +static struct dmi_system_id __initdata bad_bios_dmi_table[] = { +#ifdef CONFIG_X86_RESERVE_LOW_64K + { + .callback = dmi_low_memory_corruption, + .ident = "AMI BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + }, + }, + { + .callback = dmi_low_memory_corruption, + .ident = "Phoenix BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), + }, + }, +#endif + {} +}; + +/* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures * for initialization. Note, the efi init code path is determined by the @@ -604,14 +791,6 @@ void __init setup_arch(char **cmdline_p) early_cpu_init(); early_ioremap_init(); -#if defined(CONFIG_VMI) && defined(CONFIG_X86_32) - /* - * Must be before kernel pagetables are setup - * or fixmap area is touched. - */ - vmi_init(); -#endif - ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev); screen_info = boot_params.screen_info; edid_info = boot_params.edid_info; @@ -673,11 +852,36 @@ void __init setup_arch(char **cmdline_p) bss_resource.start = virt_to_phys(&__bss_start); bss_resource.end = virt_to_phys(&__bss_stop)-1; +#ifdef CONFIG_CMDLINE_BOOL +#ifdef CONFIG_CMDLINE_OVERRIDE + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); +#else + if (builtin_cmdline[0]) { + /* append boot loader cmdline to builtin */ + strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE); + strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + } +#endif +#endif + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; parse_early_param(); +#ifdef CONFIG_X86_64 + check_efer(); +#endif + +#if defined(CONFIG_VMI) && defined(CONFIG_X86_32) + /* + * Must be before kernel pagetables are setup + * or fixmap area is touched. + */ + vmi_init(); +#endif + /* after early param, so could get panic from serial */ reserve_early_setup_data(); @@ -695,6 +899,10 @@ void __init setup_arch(char **cmdline_p) finish_e820_parsing(); + dmi_scan_machine(); + + dmi_check_system(bad_bios_dmi_table); + #ifdef CONFIG_X86_32 probe_roms(); #endif @@ -738,7 +946,8 @@ void __init setup_arch(char **cmdline_p) #else num_physpages = max_pfn; - check_efer(); + if (cpu_has_x2apic) + check_x2apic(); /* How many end-of-memory variables you have, grandma! */ /* need this before calling reserve_initrd */ @@ -750,6 +959,10 @@ void __init setup_arch(char **cmdline_p) high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; #endif +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION + setup_bios_corruption_check(); +#endif + /* max_pfn_mapped is updated here */ max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT); max_pfn_mapped = max_low_pfn_mapped; @@ -778,8 +991,6 @@ void __init setup_arch(char **cmdline_p) vsmp_init(); #endif - dmi_scan_machine(); - io_delay_init(); /* @@ -787,6 +998,8 @@ void __init setup_arch(char **cmdline_p) */ acpi_boot_table_init(); + early_acpi_boot_init(); + #ifdef CONFIG_ACPI_NUMA /* * Parse SRAT to discover nodes. @@ -882,3 +1095,5 @@ void __init setup_arch(char **cmdline_p) #endif #endif } + + |