diff options
Diffstat (limited to 'arch/x86/kernel/setup.c')
| -rw-r--r-- | arch/x86/kernel/setup.c | 305 |
1 files changed, 260 insertions, 45 deletions
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 531b55b8e81..0fa6790c1dd 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -57,12 +57,8 @@ #include <linux/slab.h> #include <linux/user.h> #include <linux/delay.h> -#include <linux/highmem.h> #include <linux/kallsyms.h> -#include <linux/edd.h> -#include <linux/iscsi_ibft.h> -#include <linux/kexec.h> #include <linux/cpufreq.h> #include <linux/dma-mapping.h> #include <linux/ctype.h> @@ -96,7 +92,7 @@ #include <asm/smp.h> #include <asm/desc.h> #include <asm/dma.h> -#include <asm/gart.h> +#include <asm/iommu.h> #include <asm/mmu_context.h> #include <asm/proto.h> @@ -104,7 +100,6 @@ #include <asm/paravirt.h> #include <asm/percpu.h> -#include <asm/sections.h> #include <asm/topology.h> #include <asm/apicdef.h> #ifdef CONFIG_X86_64 @@ -228,6 +223,9 @@ unsigned long saved_video_mode; #define RAMDISK_LOAD_FLAG 0x4000 static char __initdata command_line[COMMAND_LINE_SIZE]; +#ifdef CONFIG_CMDLINE_BOOL +static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +#endif #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) struct edd edd; @@ -304,7 +302,7 @@ static void __init relocate_initrd(void) if (clen > MAX_MAP_CHUNK-slop) clen = MAX_MAP_CHUNK-slop; mapaddr = ramdisk_image & PAGE_MASK; - p = early_ioremap(mapaddr, clen+slop); + p = early_memremap(mapaddr, clen+slop); memcpy(q, p+slop, clen); early_iounmap(p, clen+slop); q += clen; @@ -381,7 +379,7 @@ static void __init parse_setup_data(void) return; pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = early_ioremap(pa_data, PAGE_SIZE); + data = early_memremap(pa_data, PAGE_SIZE); switch (data->type) { case SETUP_E820_EXT: parse_e820_ext(data, pa_data); @@ -404,7 +402,7 @@ static void __init e820_reserve_setup_data(void) return; pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = early_ioremap(pa_data, sizeof(*data)); + data = early_memremap(pa_data, sizeof(*data)); e820_update_range(pa_data, sizeof(*data)+data->len, E820_RAM, E820_RESERVED_KERN); found = 1; @@ -430,7 +428,7 @@ static void __init reserve_early_setup_data(void) return; pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = early_ioremap(pa_data, sizeof(*data)); + data = early_memremap(pa_data, sizeof(*data)); sprintf(buf, "setup data %x", data->type); reserve_early(pa_data, pa_data+sizeof(*data)+data->len, buf); pa_data = data->next; @@ -450,7 +448,7 @@ static void __init reserve_early_setup_data(void) * @size: Size of the crashkernel memory to reserve. * Returns the base address on success, and -1ULL on failure. */ -unsigned long long find_and_reserve_crashkernel(unsigned long long size) +unsigned long long __init find_and_reserve_crashkernel(unsigned long long size) { const unsigned long long alignment = 16<<20; /* 16M */ unsigned long long start = 0LL; @@ -563,7 +561,13 @@ static void __init reserve_standard_io_resources(void) } -#ifdef CONFIG_PROC_VMCORE +/* + * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by + * is_kdump_kernel() to determine if we are booting after a panic. Hence + * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE. + */ + +#ifdef CONFIG_CRASH_DUMP /* elfcorehdr= specifies the location of elf core header * stored by the crashed kernel. This option will be passed * by kexec loader to the capture kernel. @@ -579,6 +583,194 @@ static int __init setup_elfcorehdr(char *arg) early_param("elfcorehdr", setup_elfcorehdr); #endif +static struct x86_quirks default_x86_quirks __initdata; + +struct x86_quirks *x86_quirks __initdata = &default_x86_quirks; + +/* + * Some BIOSes seem to corrupt the low 64k of memory during events + * like suspend/resume and unplugging an HDMI cable. Reserve all + * remaining free memory in that area and fill it with a distinct + * pattern. + */ +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION +#define MAX_SCAN_AREAS 8 + +static int __read_mostly memory_corruption_check = -1; + +static unsigned __read_mostly corruption_check_size = 64*1024; +static unsigned __read_mostly corruption_check_period = 60; /* seconds */ + +static struct e820entry scan_areas[MAX_SCAN_AREAS]; +static int num_scan_areas; + + +static int set_corruption_check(char *arg) +{ + char *end; + + memory_corruption_check = simple_strtol(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("memory_corruption_check", set_corruption_check); + +static int set_corruption_check_period(char *arg) +{ + char *end; + + corruption_check_period = simple_strtoul(arg, &end, 10); + + return (*end == 0) ? 0 : -EINVAL; +} +early_param("memory_corruption_check_period", set_corruption_check_period); + +static int set_corruption_check_size(char *arg) +{ + char *end; + unsigned size; + + size = memparse(arg, &end); + + if (*end == '\0') + corruption_check_size = size; + + return (size == corruption_check_size) ? 0 : -EINVAL; +} +early_param("memory_corruption_check_size", set_corruption_check_size); + + +static void __init setup_bios_corruption_check(void) +{ + u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */ + + if (memory_corruption_check == -1) { + memory_corruption_check = +#ifdef CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK + 1 +#else + 0 +#endif + ; + } + + if (corruption_check_size == 0) + memory_corruption_check = 0; + + if (!memory_corruption_check) + return; + + corruption_check_size = round_up(corruption_check_size, PAGE_SIZE); + + while(addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) { + u64 size; + addr = find_e820_area_size(addr, &size, PAGE_SIZE); + + if (addr == 0) + break; + + if ((addr + size) > corruption_check_size) + size = corruption_check_size - addr; + + if (size == 0) + break; + + e820_update_range(addr, size, E820_RAM, E820_RESERVED); + scan_areas[num_scan_areas].addr = addr; + scan_areas[num_scan_areas].size = size; + num_scan_areas++; + + /* Assume we've already mapped this early memory */ + memset(__va(addr), 0, size); + + addr += size; + } + + printk(KERN_INFO "Scanning %d areas for low memory corruption\n", + num_scan_areas); + update_e820(); +} + +static struct timer_list periodic_check_timer; + +void check_for_bios_corruption(void) +{ + int i; + int corruption = 0; + + if (!memory_corruption_check) + return; + + for(i = 0; i < num_scan_areas; i++) { + unsigned long *addr = __va(scan_areas[i].addr); + unsigned long size = scan_areas[i].size; + + for(; size; addr++, size -= sizeof(unsigned long)) { + if (!*addr) + continue; + printk(KERN_ERR "Corrupted low memory at %p (%lx phys) = %08lx\n", + addr, __pa(addr), *addr); + corruption = 1; + *addr = 0; + } + } + + WARN(corruption, KERN_ERR "Memory corruption detected in low memory\n"); +} + +static void periodic_check_for_corruption(unsigned long data) +{ + check_for_bios_corruption(); + mod_timer(&periodic_check_timer, round_jiffies(jiffies + corruption_check_period*HZ)); +} + +void start_periodic_check_for_corruption(void) +{ + if (!memory_corruption_check || corruption_check_period == 0) + return; + + printk(KERN_INFO "Scanning for low memory corruption every %d seconds\n", + corruption_check_period); + + init_timer(&periodic_check_timer); + periodic_check_timer.function = &periodic_check_for_corruption; + periodic_check_for_corruption(0); +} +#endif + +static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) +{ + printk(KERN_NOTICE + "%s detected: BIOS may corrupt low RAM, working it around.\n", + d->ident); + + e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED); + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + + return 0; +} + +/* List of systems that have known low memory corruption BIOS problems */ +static struct dmi_system_id __initdata bad_bios_dmi_table[] = { +#ifdef CONFIG_X86_RESERVE_LOW_64K + { + .callback = dmi_low_memory_corruption, + .ident = "AMI BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), + }, + }, + { + .callback = dmi_low_memory_corruption, + .ident = "Phoenix BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), + }, + }, +#endif + {} +}; + /* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures @@ -598,11 +790,11 @@ void __init setup_arch(char **cmdline_p) memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); pre_setup_arch_hook(); - early_cpu_init(); #else printk(KERN_INFO "Command line: %s\n", boot_command_line); #endif + early_cpu_init(); early_ioremap_init(); ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev); @@ -666,14 +858,36 @@ void __init setup_arch(char **cmdline_p) bss_resource.start = virt_to_phys(&__bss_start); bss_resource.end = virt_to_phys(&__bss_stop)-1; -#ifdef CONFIG_X86_64 - early_cpu_init(); +#ifdef CONFIG_CMDLINE_BOOL +#ifdef CONFIG_CMDLINE_OVERRIDE + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); +#else + if (builtin_cmdline[0]) { + /* append boot loader cmdline to builtin */ + strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE); + strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + } #endif +#endif + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; parse_early_param(); +#ifdef CONFIG_X86_64 + check_efer(); +#endif + +#if defined(CONFIG_VMI) && defined(CONFIG_X86_32) + /* + * Must be before kernel pagetables are setup + * or fixmap area is touched. + */ + vmi_init(); +#endif + /* after early param, so could get panic from serial */ reserve_early_setup_data(); @@ -681,7 +895,7 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_X86_LOCAL_APIC disable_apic = 1; #endif - clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); + setup_clear_cpu_cap(X86_FEATURE_APIC); } #ifdef CONFIG_PCI @@ -691,6 +905,10 @@ void __init setup_arch(char **cmdline_p) finish_e820_parsing(); + dmi_scan_machine(); + + dmi_check_system(bad_bios_dmi_table); + #ifdef CONFIG_X86_32 probe_roms(); #endif @@ -734,7 +952,8 @@ void __init setup_arch(char **cmdline_p) #else num_physpages = max_pfn; - check_efer(); + if (cpu_has_x2apic) + check_x2apic(); /* How many end-of-memory variables you have, grandma! */ /* need this before calling reserve_initrd */ @@ -746,6 +965,10 @@ void __init setup_arch(char **cmdline_p) high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1; #endif +#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION + setup_bios_corruption_check(); +#endif + /* max_pfn_mapped is updated here */ max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT); max_pfn_mapped = max_low_pfn_mapped; @@ -774,8 +997,6 @@ void __init setup_arch(char **cmdline_p) vsmp_init(); #endif - dmi_scan_machine(); - io_delay_init(); /* @@ -783,6 +1004,8 @@ void __init setup_arch(char **cmdline_p) */ acpi_boot_table_init(); + early_acpi_boot_init(); + #ifdef CONFIG_ACPI_NUMA /* * Parse SRAT to discover nodes. @@ -792,10 +1015,6 @@ void __init setup_arch(char **cmdline_p) initmem_init(0, max_pfn); -#ifdef CONFIG_X86_64 - dma32_reserve_bootmem(); -#endif - #ifdef CONFIG_ACPI_SLEEP /* * Reserve low memory region for sleep support. @@ -810,21 +1029,25 @@ void __init setup_arch(char **cmdline_p) #endif reserve_crashkernel(); +#ifdef CONFIG_X86_64 + /* + * dma32_reserve_bootmem() allocates bootmem which may conflict + * with the crashkernel command line, so do that after + * reserve_crashkernel() + */ + dma32_reserve_bootmem(); +#endif + reserve_ibft_region(); #ifdef CONFIG_KVM_CLOCK kvmclock_init(); #endif -#if defined(CONFIG_VMI) && defined(CONFIG_X86_32) - /* - * Must be after max_low_pfn is determined, and before kernel - * pagetables are setup. - */ - vmi_init(); -#endif - + paravirt_pagetable_setup_start(swapper_pg_dir); paging_init(); + paravirt_pagetable_setup_done(swapper_pg_dir); + paravirt_post_allocator_init(); #ifdef CONFIG_X86_64 map_vsyscall(); @@ -850,27 +1073,17 @@ void __init setup_arch(char **cmdline_p) #endif prefill_possible_map(); + #ifdef CONFIG_X86_64 init_cpu_to_node(); #endif -#ifdef CONFIG_X86_NUMAQ - /* - * need to check online nodes num, call it - * here before time_init/tsc_init - */ - numaq_tsc_disable(); -#endif - init_apic_mappings(); ioapic_init_mappings(); -#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC) && defined(CONFIG_X86_32) - if (def_to_bigsmp) - printk(KERN_WARNING "More than 8 CPUs detected and " - "CONFIG_X86_PC cannot handle it.\nUse " - "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n"); -#endif + /* need to wait for io_apic is mapped */ + nr_irqs = probe_nr_irqs(); + kvm_guest_init(); e820_reserve_resources(); @@ -892,3 +1105,5 @@ void __init setup_arch(char **cmdline_p) #endif #endif } + + |