diff options
Diffstat (limited to 'arch/x86/kernel/smpboot.c')
-rw-r--r-- | arch/x86/kernel/smpboot.c | 225 |
1 files changed, 43 insertions, 182 deletions
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index bb1a3b1fc87..ef7d10170c3 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -2,7 +2,7 @@ * x86 SMP booting functions * * (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk> - * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com> + * (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com> * Copyright 2001 Andi Kleen, SuSE Labs. * * Much of the core SMP work is based on previous work by Thomas Radke, to @@ -53,7 +53,6 @@ #include <asm/nmi.h> #include <asm/irq.h> #include <asm/idle.h> -#include <asm/smp.h> #include <asm/trampoline.h> #include <asm/cpu.h> #include <asm/numa.h> @@ -61,13 +60,12 @@ #include <asm/tlbflush.h> #include <asm/mtrr.h> #include <asm/vmi.h> -#include <asm/genapic.h> +#include <asm/apic.h> #include <asm/setup.h> +#include <asm/uv/uv.h> #include <linux/mc146818rtc.h> -#include <mach_apic.h> -#include <mach_wakecpu.h> -#include <smpboot_hooks.h> +#include <asm/smpboot_hooks.h> #ifdef CONFIG_X86_32 u8 apicid_2_node[MAX_APICID]; @@ -114,11 +112,7 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map); DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info); EXPORT_PER_CPU_SYMBOL(cpu_info); -static atomic_t init_deasserted; - - -/* Set if we find a B stepping CPU */ -static int __cpuinitdata smp_b_stepping; +atomic_t init_deasserted; #if defined(CONFIG_NUMA) && defined(CONFIG_X86_32) @@ -163,7 +157,7 @@ static void map_cpu_to_logical_apicid(void) { int cpu = smp_processor_id(); int apicid = logical_smp_processor_id(); - int node = apicid_to_node(apicid); + int node = apic->apicid_to_node(apicid); if (!node_online(node)) node = first_online_node; @@ -196,7 +190,8 @@ static void __cpuinit smp_callin(void) * our local APIC. We have to wait for the IPI or we'll * lock up on an APIC access. */ - wait_for_init_deassert(&init_deasserted); + if (apic->wait_for_init_deassert) + apic->wait_for_init_deassert(&init_deasserted); /* * (This works even if the APIC is not enabled.) @@ -243,7 +238,8 @@ static void __cpuinit smp_callin(void) */ pr_debug("CALLIN, before setup_local_APIC().\n"); - smp_callin_clear_local_apic(); + if (apic->smp_callin_clear_local_apic) + apic->smp_callin_clear_local_apic(); setup_local_APIC(); end_local_APIC_setup(); map_cpu_to_logical_apicid(); @@ -271,8 +267,6 @@ static void __cpuinit smp_callin(void) cpumask_set_cpu(cpuid, cpu_callin_mask); } -static int __cpuinitdata unsafe_smp; - /* * Activate a secondary processor. */ @@ -340,76 +334,6 @@ notrace static void __cpuinit start_secondary(void *unused) cpu_idle(); } -static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c) -{ - /* - * Mask B, Pentium, but not Pentium MMX - */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 5 && - c->x86_mask >= 1 && c->x86_mask <= 4 && - c->x86_model <= 3) - /* - * Remember we have B step Pentia with bugs - */ - smp_b_stepping = 1; - - /* - * Certain Athlons might work (for various values of 'work') in SMP - * but they are not certified as MP capable. - */ - if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) { - - if (num_possible_cpus() == 1) - goto valid_k7; - - /* Athlon 660/661 is valid. */ - if ((c->x86_model == 6) && ((c->x86_mask == 0) || - (c->x86_mask == 1))) - goto valid_k7; - - /* Duron 670 is valid */ - if ((c->x86_model == 7) && (c->x86_mask == 0)) - goto valid_k7; - - /* - * Athlon 662, Duron 671, and Athlon >model 7 have capability - * bit. It's worth noting that the A5 stepping (662) of some - * Athlon XP's have the MP bit set. - * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for - * more. - */ - if (((c->x86_model == 6) && (c->x86_mask >= 2)) || - ((c->x86_model == 7) && (c->x86_mask >= 1)) || - (c->x86_model > 7)) - if (cpu_has_mp) - goto valid_k7; - - /* If we get here, not a certified SMP capable AMD system. */ - unsafe_smp = 1; - } - -valid_k7: - ; -} - -static void __cpuinit smp_checks(void) -{ - if (smp_b_stepping) - printk(KERN_WARNING "WARNING: SMP operation may be unreliable" - "with B stepping processors.\n"); - - /* - * Don't taint if we are running SMP kernel on a single non-MP - * approved Athlon - */ - if (unsafe_smp && num_online_cpus() > 1) { - printk(KERN_INFO "WARNING: This combination of AMD" - "processors is not suitable for SMP.\n"); - add_taint(TAINT_UNSAFE_SMP); - } -} - /* * The bootstrap kernel entry code has set these up. Save them for * a given CPU @@ -423,7 +347,6 @@ void __cpuinit smp_store_cpu_info(int id) c->cpu_index = id; if (id != 0) identify_secondary_cpu(c); - smp_apply_quirks(c); } @@ -583,7 +506,7 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip) /* Target chip */ /* Boot on the stack */ /* Kick the second */ - apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid); + apic_icr_write(APIC_DM_NMI | apic->dest_logical, logical_apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -614,12 +537,6 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) unsigned long send_status, accept_status = 0; int maxlvt, num_starts, j; - if (get_uv_system_type() == UV_NON_UNIQUE_APIC) { - send_status = uv_wakeup_secondary(phys_apicid, start_eip); - atomic_set(&init_deasserted, 1); - return send_status; - } - maxlvt = lapic_get_maxlvt(); /* @@ -745,78 +662,23 @@ static void __cpuinit do_fork_idle(struct work_struct *work) complete(&c_idle->done); } -#ifdef CONFIG_X86_64 - -/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */ -static void __ref free_bootmem_pda(struct x8664_pda *oldpda) -{ - if (!after_bootmem) - free_bootmem((unsigned long)oldpda, sizeof(*oldpda)); -} - -/* - * Allocate node local memory for the AP pda. - * - * Must be called after the _cpu_pda pointer table is initialized. - */ -int __cpuinit get_local_pda(int cpu) -{ - struct x8664_pda *oldpda, *newpda; - unsigned long size = sizeof(struct x8664_pda); - int node = cpu_to_node(cpu); - - if (cpu_pda(cpu) && !cpu_pda(cpu)->in_bootmem) - return 0; - - oldpda = cpu_pda(cpu); - newpda = kmalloc_node(size, GFP_ATOMIC, node); - if (!newpda) { - printk(KERN_ERR "Could not allocate node local PDA " - "for CPU %d on node %d\n", cpu, node); - - if (oldpda) - return 0; /* have a usable pda */ - else - return -1; - } - - if (oldpda) { - memcpy(newpda, oldpda, size); - free_bootmem_pda(oldpda); - } - - newpda->in_bootmem = 0; - cpu_pda(cpu) = newpda; - return 0; -} -#endif /* CONFIG_X86_64 */ - -static int __cpuinit do_boot_cpu(int apicid, int cpu) /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad * (ie clustered apic addressing mode), this is a LOGICAL apic ID. - * Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu. + * Returns zero if CPU booted OK, else error code from + * ->wakeup_secondary_cpu. */ +static int __cpuinit do_boot_cpu(int apicid, int cpu) { unsigned long boot_error = 0; - int timeout; unsigned long start_ip; - unsigned short nmi_high = 0, nmi_low = 0; + int timeout; struct create_idle c_idle = { - .cpu = cpu, - .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), + .cpu = cpu, + .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), }; - INIT_WORK(&c_idle.work, do_fork_idle); -#ifdef CONFIG_X86_64 - /* Allocate node local memory for AP pdas */ - if (cpu > 0) { - boot_error = get_local_pda(cpu); - if (boot_error) - goto restore_state; - /* if can't get pda memory, can't start cpu */ - } -#endif + INIT_WORK(&c_idle.work, do_fork_idle); alternatives_smp_switch(1); @@ -847,14 +709,16 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) set_idle_for_cpu(cpu, c_idle.idle); do_rest: -#ifdef CONFIG_X86_32 per_cpu(current_task, cpu) = c_idle.idle; - init_gdt(cpu); +#ifdef CONFIG_X86_32 /* Stack for startup_32 can be just as for start_secondary onwards */ irq_ctx_init(cpu); #else - cpu_pda(cpu)->pcurrent = c_idle.idle; clear_tsk_thread_flag(c_idle.idle, TIF_FORK); + initial_gs = per_cpu_offset(cpu); + per_cpu(kernel_stack, cpu) = + (unsigned long)task_stack_page(c_idle.idle) - + KERNEL_STACK_OFFSET + THREAD_SIZE; #endif early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); initial_code = (unsigned long)start_secondary; @@ -878,8 +742,6 @@ do_rest: pr_debug("Setting warm reset code and vector.\n"); - store_NMI_vector(&nmi_high, &nmi_low); - smpboot_setup_warm_reset_vector(start_ip); /* * Be paranoid about clearing APIC errors. @@ -891,9 +753,13 @@ do_rest: } /* - * Starting actual IPI sequence... + * Kick the secondary CPU. Use the method in the APIC driver + * if it's defined - or use an INIT boot APIC message otherwise: */ - boot_error = wakeup_secondary_cpu(apicid, start_ip); + if (apic->wakeup_secondary_cpu) + boot_error = apic->wakeup_secondary_cpu(apicid, start_ip); + else + boot_error = wakeup_secondary_cpu_via_init(apicid, start_ip); if (!boot_error) { /* @@ -927,13 +793,11 @@ do_rest: else /* trampoline code not run */ printk(KERN_ERR "Not responding.\n"); - if (get_uv_system_type() != UV_NON_UNIQUE_APIC) - inquire_remote_apic(apicid); + if (apic->inquire_remote_apic) + apic->inquire_remote_apic(apicid); } } -#ifdef CONFIG_X86_64 -restore_state: -#endif + if (boot_error) { /* Try to put things back the way they were before ... */ numa_remove_cpu(cpu); /* was set by numa_add_cpu */ @@ -961,7 +825,7 @@ restore_state: int __cpuinit native_cpu_up(unsigned int cpu) { - int apicid = cpu_present_to_apicid(cpu); + int apicid = apic->cpu_present_to_apicid(cpu); unsigned long flags; int err; @@ -1054,14 +918,14 @@ static int __init smp_sanity_check(unsigned max_cpus) { preempt_disable(); -#if defined(CONFIG_X86_PC) && defined(CONFIG_X86_32) +#if !defined(CONFIG_X86_BIGSMP) && defined(CONFIG_X86_32) if (def_to_bigsmp && nr_cpu_ids > 8) { unsigned int cpu; unsigned nr; printk(KERN_WARNING "More than 8 CPUs detected - skipping them.\n" - "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n"); + "Use CONFIG_X86_BIGSMP.\n"); nr = 0; for_each_present_cpu(cpu) { @@ -1107,7 +971,7 @@ static int __init smp_sanity_check(unsigned max_cpus) * Should not be necessary because the MP table should list the boot * CPU too, but we do it for the sake of robustness anyway. */ - if (!check_phys_apicid_present(boot_cpu_physical_apicid)) { + if (!apic->check_phys_apicid_present(boot_cpu_physical_apicid)) { printk(KERN_NOTICE "weird, boot CPU (#%d) not listed by the BIOS.\n", boot_cpu_physical_apicid); @@ -1125,6 +989,7 @@ static int __init smp_sanity_check(unsigned max_cpus) printk(KERN_ERR "... forcing use of dummy APIC emulation." "(tell your hw vendor)\n"); smpboot_clear_io_apic(); + arch_disable_smp_support(); return -1; } @@ -1181,9 +1046,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) current_thread_info()->cpu = 0; /* needed? */ set_cpu_sibling_map(0); -#ifdef CONFIG_X86_64 enable_IR_x2apic(); - setup_apic_routing(); +#ifdef CONFIG_X86_64 + default_setup_apic_routing(); #endif if (smp_sanity_check(max_cpus) < 0) { @@ -1207,18 +1072,18 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) */ setup_local_APIC(); -#ifdef CONFIG_X86_64 /* * Enable IO APIC before setting up error vector */ if (!skip_ioapic_setup && nr_ioapics) enable_IO_APIC(); -#endif + end_local_APIC_setup(); map_cpu_to_logical_apicid(); - setup_portio_remap(); + if (apic->setup_portio_remap) + apic->setup_portio_remap(); smpboot_setup_io_apic(); /* @@ -1240,10 +1105,7 @@ out: void __init native_smp_prepare_boot_cpu(void) { int me = smp_processor_id(); -#ifdef CONFIG_X86_32 - init_gdt(me); -#endif - switch_to_new_gdt(); + switch_to_new_gdt(me); /* already set me in cpu_online_mask in boot_cpu_init() */ cpumask_set_cpu(me, cpu_callout_mask); per_cpu(cpu_state, me) = CPU_ONLINE; @@ -1254,7 +1116,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus) pr_debug("Boot done.\n"); impress_friends(); - smp_checks(); #ifdef CONFIG_X86_IO_APIC setup_ioapic_dest(); #endif |